cmEthernetTrafficPortSvcType
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.27.1.56
Object
column
r/w
CmEthernetTrafficSvcType
This object allows specification of whether the Ethernet Port is port based or vlan based.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.27.1.56- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmEthernetTrafficPortEntry
- Table
- cmEthernetTrafficPortTable
- Siblings
- 113
Syntax
CmEthernetTrafficSvcType
- Source
- CmEthernetTrafficSvcType
- Base type
Enumeration
Values & Constraints
Type Values
1 | all-to-one |
2 | service-multiplexing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmEthernetTrafficPortIndex An integer index value used to uniquely identify
this Ethernet Port within a card.
Note that each Ethernet Port is uniquely identified
by the indices neIndex, shelfIndex,
slotInd… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.1 |
| cmEthernetTrafficPortNegotiatedSpeed This object provides the negotiated speed of the
Ethernet Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.27.1.10 |
| cmEthernetTrafficPortDiagnoseLpbkCond This object provides port loopback results of the diagnosis
test on Ethernet Traffic Port. | column | CmDiagLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.100 |
| cmEthernetTrafficPortDiagnoseEfmLpbkCond This object provides remote EFM loopback results of the diagnosis
test on Ethernet Traffic Port. | column | CmDiagEfmOamLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.101 |
| cmEthernetTrafficPortDiagnoseResult This object provides results of the diagnosis
test in string form on Ethernet Traffic Port. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.102 |
| cmEthernetTrafficPortDiagnoseTestStatus This object provides the current status of the diagnosis
test on Ethernet Traffic Port. | column | CmDiagTestStatus | .1.3.6.1.4.1.2544.1.12.4.1.27.1.103 |
| cmEthernetTrafficPortDiagnoseTestTime This object provides the time when diagnosis test was last executed. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.27.1.104 |
| cmEthernetTrafficPortAutoDiagEnabled This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.105 |
| cmEthernetTrafficPortDeleteEntitiesAction This object allows to delete esa entities relate this port and
Cfm entities relate this port. | column | TrafficPortDeleteEntitiesAction | .1.3.6.1.4.1.2544.1.12.4.1.27.1.106 |
| cmEthernetTrafficPortMaxMpFpNum This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard,
ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.107 |
| cmEthernetTrafficPortJdsuLoopbackEnabled deprecated This object allows to enable or disable jdsu loopback on this port.
Note: This object is deprecated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.108 |
| cmEthernetTrafficPortJdsuLoopbackVlanId deprecated This object allows to set the jdsu loopback vlan.
if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21),
then VID is 0 means not applicable.
… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.27.1.109 |
| cmEthernetTrafficPortMDIXType This object allows management of MDIX property on
Ethernet Port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.11 |
| cmEthernetTrafficPortIngressPopPriorityVidEnabled This object defines the Ingress PopPriorityVid enable or disable of the port.
If it is enabled, then incoming priority tagged
packet's VID is swapped to Priority VLAN ID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.110 |
| cmEthernetTrafficPortRxDeiAction This object allows to specify
the Receive DEI Action. | column | RxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.27.1.111 |
| cmEthernetTrafficPortTxDeiAction This object allows to specify
the Transmit DEI Action. | column | TxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.27.1.112 |
| cmEthernetTrafficPortRxDeiOuterTagType This object allows to specify
the Receive DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.113 |
| cmEthernetTrafficPortTxDeiOuterTagType This object allows to specify
the Transmit DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.114 |
| cmEthernetTrafficPortMDIXStatus This object provides the current MDIX status of the
Ethernet port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.12 |
| cmEthernetTrafficPortSfpVendorName This object provides the vendor name of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.13 |
| cmEthernetTrafficPortSfpPartNumber This object provides the part number of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.14 |
| cmEthernetTrafficPortSfpSerialNumber This object provides the serial number of the SFP.
This is shown only when cmEthernetTrafficPortMediaType is fiber. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.15 |
| cmEthernetTrafficPortSfpDateOfManufacture This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.27.1.16 |
| cmEthernetTrafficPortSfpConnectorValue This object provides the SFP connector value.
This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpConnectorValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.17 |
| cmEthernetTrafficPortSfpLinkLength This object provides the SFP Link Length.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.18 |
| cmEthernetTrafficPortSfpLaserWaveLength This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetTrafficPortMediaType is fiber. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.19 |
| cmEthernetTrafficPortIfIndex This object has the same value as ifIndex for
Ethernet Port. An integer index value used to
uniquely identify this Ethernet Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.27.1.2 |
| cmEthernetTrafficPortSfpMediaType This object provides the SFP Media Type.
This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpMediaType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.20 |
| cmEthernetTrafficPortLoopbackConfig This object allows to initiate loopbacks on
on the Ethernet Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.21 |
| cmEthernetTrafficPortLoopbackStatus This object provides status of the current loopback
on the Ethernet Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.22 |
| cmEthernetTrafficPortLoopbackTime This object allows to specify time for timed-loopbacks on
on the Ethernet Port. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.23 |
| cmEthernetTrafficPortLoopbackSwapSADA This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped. | column | CmSwapSADAType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.24 |
| cmEthernetTrafficPortOuterVlanLoopbackMask This object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.25 |
| cmEthernetTrafficPortOuterVlanLoopback1 This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.26 |
| cmEthernetTrafficPortOuterVlanLoopback2 This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.27 |
| cmEthernetTrafficPortOuterVlanLoopback3 This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.28 |
| cmEthernetTrafficPortLinkLossFwdEnabled This object allows enabling/disabling link loss forwarding
on the Ethernet Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.29 |
| cmEthernetTrafficPortEntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.27.1.3 |
| cmEthernetTrafficPortLinkLossFwdSignalType This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled. | column | CmLinkLossFwdSignalType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.30 |
| cmEthernetTrafficPortLinkLossFwdTriggerTypes This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetTrafficPortLinkLossFwdEnabled is enabled. | column | CmLinkLossFwdTriggerTypes | .1.3.6.1.4.1.2544.1.12.4.1.27.1.31 |
| cmEthernetTrafficPortLinkLossFwdDelay This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.32 |
| cmEthernetTrafficPortLinkLossFwdActive This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.33 |
| cmEthernetTrafficPortLinkLossFwdPartnerEnabled This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.34 |
| cmEthernetTrafficPortLinkLossFwdLocalLinkId This object allows configuration of the Local Link Id on
Ethernet port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.35 |
| cmEthernetTrafficPortLinkLossFwdRemoteLinkIds This object allows enabling/disabling Remote Link Ids
on Ethernet port. the Ethernet port is able to distinguish
the remote side client ports from the Remote Link Down
PDUs comi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.36 |
| cmEthernetTrafficPortLinkLossFwdTxActionType This object allows to specify the Ethernet Port's behavior when
link loss forwarding trigger events occur on the Port.
This provides ability to configure per Ethernet port LLF beh… | column | CmLinkLossFwdTxActionType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.37 |
| cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds This object provides the received Remote Link IDs in
EFM RLD messages on the Ethernet Port. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.38 |
| cmEthernetTrafficPortOamId OAM Id. This is unique EFM OAM sublayer port id. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.39 |
| cmEthernetTrafficPortAdminState This object represents the Administrative State of the Ethernet Port. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.27.1.4 |
| cmEthernetTrafficPortOamDiscoveryState Ethernet Port's OAM discovery state. | column | CmOamDiscoveryState | .1.3.6.1.4.1.2544.1.12.4.1.27.1.40 |
| cmEthernetTrafficPortOamLocalVarRtrvsEnabled This object allows specification of whether the Ethernet
Port supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.41 |
| cmEthernetTrafficPortOamLocalLinkEventsEnabled This object allows specification of whether the Ethernet
Port supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.42 |
| cmEthernetTrafficPortOamLocalOamLoopbacksSupported This object allows specification of whether the Ethernet
Port is capable of OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.43 |
| cmEthernetTrafficPortOamLocalUnidirSupportEnabled This object allows specification of whether the Ethernet
Port is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.44 |
| cmEthernetTrafficPortOamLocalMaxPDUSize This object represents the largest OAMPDU, in octets,
supported by the Ethernet Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.45 |
| cmEthernetTrafficPortOamLocalMode This object allows to configure the OAM sublayer entity in
either Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.27.1.46 |
| cmEthernetTrafficPortOamRemoteMacAddress This object allows retrieval of the Remote Mac Address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.27.1.47 |
| cmEthernetTrafficPortOamRemoteVarRtrvsEnabled This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.48 |
| cmEthernetTrafficPortOamRemoteLinkEventsEnabled This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.49 |
| cmEthernetTrafficPortOperationalState This object represents the Operational State of the Ethernet Port. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.27.1.5 |
| cmEthernetTrafficPortOamRemoteOamLoopbacksSupported This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.50 |
| cmEthernetTrafficPortOamRemoteUnidirSupportEnabled This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.51 |
| cmEthernetTrafficPortOamRemoteMaxPDUSize This object allows retrieval of the remote OAM
entity maximum OAMPDU size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.52 |
| cmEthernetTrafficPortOamRemoteMode This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.27.1.53 |
| cmEthernetTrafficPortOamEnabled This object allows to manage the EFM OAM on Ethernet Traffic Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.54 |
| cmEthernetTrafficPortOamAdminState This object provides the EFM OAM Admin State. | column | CmOamAdminState | .1.3.6.1.4.1.2544.1.12.4.1.27.1.55 |
| cmEthernetTrafficPortRxPauseEnabled This object defines the RxPause enable or disable of the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.57 |
| cmEthernetTrafficPortTxPauseEnabled This object allows enabling/disabling transmit pause frames on
Ethernet port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.58 |
| cmEthernetTrafficPortAfpType This object allows specification of the Acceptable Frame Policy on
Ethernet port. Users can specify whether the port supports
only tagged frames, only untagged frames or both tagg… | column | CmAfpType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.59 |
| cmEthernetTrafficPortSecondaryState This object represents the Secondary State of the Ethernet Port. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.27.1.6 |
| cmEthernetTrafficPortShapingEnabled This object allows to manage the Ethernet Port Shaping.
When enabled, values in cmEthernetTrafficPortShapedSpeedLo and
cmEthernetTrafficPortShapedSpeedHi are applicable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.60 |
| cmEthernetTrafficPortShapedSpeedLo This object allows to specify the lower 32 bits of
the Ethernet Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.61 |
| cmEthernetTrafficPortShapedSpeedHi This object allows to specify the higher 32 bits of
the Port Shaped speed. This value is applicable
when cmEthernetTrafficPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.62 |
| cmEthernetTrafficPortQinQEtherType This object allows to specify the Q-in-Q Ether Type
on the Port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.63 |
| cmEthernetTrafficPortTagFrameControl This object defines if c-tag/s-tag frame is allowed to pass through,
available only when AFP is set to Tagged. | column | CM-COMMON-MIBAfpTagControl | .1.3.6.1.4.1.2544.1.12.4.1.27.1.64 |
| cmEthernetTrafficPortEgressVlanTrunkingEnabled This object allows to enable or disable the VLAN trunking on
Ethernet port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the port.
This object… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.65 |
| cmEthernetTrafficPortIngressPushPVIDEnabled This object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be PUSHed on untagged frames or not in the
ingress direction. This object is only applicable
fo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.66 |
| cmEthernetTrafficPortEgressPopPVIDEnabled This object allows to specify whether cmEthernetTrafficPortPortVlanId
value will be POPed in the
egress direction. This object is only applicable
for connection-oriented, evpl … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.67 |
| cmEthernetTrafficPortEgressPopPriorityVidEnabled This object defines the egress PopPriorityVid enable or disable of the port.
If it is enabled, the outgoing packets with VID=Priority VLAN ID
will be swapped back to VID=0. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.68 |
| cmEthernetTrafficPortPortVlanId This object allows to specify the Ethernet Port VLAN Id
to PUSH on untagged frames in the to Network
direction. This object is only applicable for connection-oriented,
evpl serv… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.27.1.69 |
| cmEthernetTrafficPortMTU This object provides the MTU on the Ethernet Port.
The object is made read-write for FSP150CC devices. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.7 |
| cmEthernetTrafficPortPortVlanPriority This object allows to specify the Ethernet Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId)
on untagged frames in the ingress direction.… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.27.1.70 |
| cmEthernetTrafficPortPriorityVlanId This object allows to specify the Ethernet Priority VLAN Id
to replace the null-tagged or priority tagged frames in the
to ingress direction. This object is only applicable
fo… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.27.1.71 |
| cmEthernetTrafficPortIngressPrioMapMode This object allows to specify the Ethernet Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl service type. | column | CM-COMMON-MIBPriorityMapMode | .1.3.6.1.4.1.2544.1.12.4.1.27.1.72 |
| cmEthernetTrafficPortIngressCOSPriority This object is used to specify whether the EthernetTrafficPort
uses the inner-tag or the outer-tag in determining the COS (Class of Service). | column | CM-COMMON-MIBVlanTagType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.73 |
| cmEthernetTrafficPortSyncEEnabled This object allows to specify whether the Ethernet Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable ports.
W… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.74 |
| cmEthernetTrafficPortQLModeEnabled This object allows to specify whether the Ethernet Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEtherne… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.75 |
| cmEthernetTrafficPortExpectedQL This object allows to specify the expected QL when the
Ethernet Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cmEtherne… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.27.1.76 |
| cmEthernetTrafficPortAssumedQL This object allows to specify the assumed QL on the
Ethernet Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningful if t… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.27.1.77 |
| cmEthernetTrafficPortReceivedQL This object provides the Received QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable.This object is o… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.27.1.78 |
| cmEthernetTrafficPortTransmitQL This object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port TransmitQL Mode is disabled, then the received
QL value is not applicable. This object … | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.27.1.79 |
| cmEthernetTrafficPortMediaType This object represents the type of Ethernet Media on the
Ethernet Port.
The media type includes,
copper (1)
fiber (2)
coppersfp (3)
CM Aggregation Product doesn't sup… | column | CM-COMMON-MIBEthernetMediaType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.8 |
| cmEthernetTrafficPortPhyType This object is valid only to XGE card. And the value should be LAN or WAN when
it is XGE card. | column | XgePhyType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.80 |
| cmEthernetTrafficPortSfpLaserWaveLengthPicometer This object provide laser wavelength pico value.
For example, laser wavelength is 1510.01,
then cmEthernetTrafficPortSfpLaserWaveLength=1510
and cmTrafficPortSfpLaserWaveLengthPi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.81 |
| cmEthernetTrafficPortRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.4.1.27.1.82 |
| cmEthernetTrafficPortSSMRemoteMacAddress This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.27.1.83 |
| cmEthernetTrafficPortInnerVlanLoopbackMask This object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.84 |
| cmEthernetTrafficPortInnerVlanLoopback1 This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.85 |
| cmEthernetTrafficPortInnerVlanLoopback2 This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.86 |
| cmEthernetTrafficPortInnerVlanLoopback3 This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.27.1.87 |
| cmEthernetTrafficPortLaserWDMChannel Channel number of WDM tunable XFP setting. | column | SfpChannelIdentifier | .1.3.6.1.4.1.2544.1.12.4.1.27.1.88 |
| cmEthernetTrafficPortLaserIsTunable This object means this module whether tunnable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.89 |
| cmEthernetTrafficPortConfigSpeed This object allows to configure the speed of the
Ethernet Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.27.1.9 |
| cmEthernetTrafficPortLaserFrequency This object describes this module's frequency, and the step is 1GHZ. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.27.1.90 |
| cmEthernetTrafficPortDeiEnable deprecated This object describes whether use DEI bit in S-tag to
recognize Drop Eligibility Parameter for ingress S-tag packets or Set
DEI bit for egress S-tag Packets.
This object is st… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.27.1.91 |
| cmEthernetTrafficPortPcpDEEncType This object describes the PCP encoding mode for egress packets
and the PCP decoding mode for ingress packets on this port. | column | PcpDEEncType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.92 |
| cmEthernetTrafficPortPcpDEPairsAction This object describes this port pcp de pairs action. | column | PcpDEPairsAction | .1.3.6.1.4.1.2544.1.12.4.1.27.1.93 |
| cmEthernetTrafficPortInitiateDiag This object allows to initiate Etherjack diagnosis on the
Ethernet Traffic Port. | column | CmEthernetDiagAction | .1.3.6.1.4.1.2544.1.12.4.1.27.1.94 |
| cmEthernetTrafficPortDiagnosePair1Cond This object provides diagnosis results for the cable Pair 1
on Ethernet Traffic Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.95 |
| cmEthernetTrafficPortDiagnosePair2Cond This object provides diagnosis results for the cable Pair 2
on Ethernet Traffic Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.96 |
| cmEthernetTrafficPortDiagnosePair3Cond This object provides diagnosis results for the cable Pair 3
on Ethernet Traffic Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.97 |
| cmEthernetTrafficPortDiagnosePair4Cond This object provides diagnosis results for the cable Pair 4
on Ethernet Traffic Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.98 |
| cmEthernetTrafficPortDiagnoseAutoNegCond This object provides auto negotiation results of the diagnosis
test on Ethernet Traffic Port. | column | CmDiagAutoNegCondType | .1.3.6.1.4.1.2544.1.12.4.1.27.1.99 |