cmEthernetAccPortOamRemoteMacAddress
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.1.1.58
Object
column
SNMPv2-TCMacAddress
This object allows retrieval of the Remote Mac Address.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.1.1.58- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmEthernetAccPortEntry
- Table
- cmEthernetAccPortTable
- Siblings
- 120
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmEthernetAccPortIndex An integer index value used to uniquely identify
this Ethernet Access Port within a card.
Note that each Ethernet Access Port is uniquely identified
by the indices neIndex, shelfI… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.1 |
| cmEthernetAccPortNegotiatedSpeed This object provides the negotiated speed of the
Ethernet Access Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.1.1.10 |
| cmEthernetAccPortXgePhyType This object allows to specify the PHY type of 10G Ethernet Port.
10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY
and port rate in this mode is 10Gbps… | column | XgePhyType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.100 |
| cmEthernetAccPortLoopbackSourceMacControlEnabled This object allows to Enable/Disable the Acc Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.101 |
| cmEthernetAccPortLoopbackDestMacControlEnabled This object allows to Enable/Disable the Acc Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.102 |
| cmEthernetAccPortLoopbackSourceMacAddress This object allows to set Acc Port Source MAC Address for frame
matching when Acc Port Source MAC Control is enabled. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.1.1.103 |
| cmEthernetAccPortLoopbackDestMacAddress This object allows to set Acc Port Destination MAC Address for frame
matching when Acc Port Destination MAC Control is enabled. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.1.1.104 |
| cmEthernetAccPortLoopbackBlockingEnabled This object allows frame blocking when loopback is active.
- True: Blocks frames in the non-loopback direction
that match the PORT or VLAN received in the
non-loopback direc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.105 |
| cmEthernetAccPortRxDeiAction This object allows to specify
the Receive DEI Action. | column | RxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.1.1.106 |
| cmEthernetAccPortTxDeiAction This object allows to specify
the Transmit DEI Action. | column | TxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.1.1.107 |
| cmEthernetAccPortRxDeiOuterTagType This object allows to specify
the Receive DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.108 |
| cmEthernetAccPortTxDeiOuterTagType This object allows to specify
the Transmit DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.109 |
| cmEthernetAccPortMDIXType This object allows management of MDIX property on
Ethernet Access Port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.11 |
| cmEthernetAccPortLaserWDMChannel Channel number of WDM tunable XFP setting. | column | SfpChannelIdentifier | .1.3.6.1.4.1.2544.1.12.4.1.1.1.110 |
| cmEthernetAccPortLaserIsTunable Channel number of WDM tunable XFP setting. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.111 |
| cmEthernetAccPortLaserFrequency Channel number of WDM tunable XFP setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.112 |
| cmEthernetAccPortMediaTypeAutoSelected This object provides the auto selected Ethernet Media of the
Ethernet Access Port. | column | CM-COMMON-MIBEthernetMediaType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.113 |
| cmEthernetAccPortLowLatencyQueuingEnabled This object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Access Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.114 |
| cmEthernetAccPortA2nSwapPriorityVIDEnabled This object allows to Enable/Disable
the Swapping of Priority Vlan Id in the A2N direction. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.115 |
| cmEthernetAccPortN2aSwapPriorityVIDEnabled This object allows to Enable/Disable
the Swapping of Priority Vlan Id in the N2A direction. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.116 |
| cmEthernetAccPortSwapPriorityVID This object allows to specify the value of
Vlan Id for the Swapping of Priority Vlan Id operation
for both the A2N and N2A direction. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.1.1.117 |
| cmEthernetAccPortDiagnosticMacAddress This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.1.1.118 |
| cmEthernetAccPortIngressCOSPriority deprecated Indicates which VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is… | column | CM-COMMON-MIBVlanTagType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.119 |
| cmEthernetAccPortJumboFramesEnabled This object allows enabling/disabling jumbo frames support on
the Ethernet Access Port. This object is only applicable for
Ethernet Access Port on R3.1CM NTU Card. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.12 |
| cmEthernetAccPortDefaultCOS deprecated The COS assigned to a frame that does not have a valid COS identifier
for the Priority Map Mode of the port. This attribute is only applicable
on products when Flowpoint Model is … | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.120 |
| cmEthernetAccPortTrafficModel The Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model. | column | EthernetPortTrafficModel | .1.3.6.1.4.1.2544.1.12.4.1.1.1.121 |
| cmEthernetAccPortSfpVendorName This object provides the vendor name of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.13 |
| cmEthernetAccPortSfpPartNumber This object provides the part number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.14 |
| cmEthernetAccPortSfpSerialNumber This object provides the serial number of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.15 |
| cmEthernetAccPortSfpDateOfManufacture This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.1.1.16 |
| cmEthernetAccPortSfpConnectorValue This object provides the SFP connector value.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpConnectorValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.17 |
| cmEthernetAccPortInitiateDiag This object allows to initiate Etherjack diagnosis on the
Ethernet Access Port. | column | CmEthernetDiagAction | .1.3.6.1.4.1.2544.1.12.4.1.1.1.18 |
| cmEthernetAccPortDiagnosePair1Cond This object provides diagnosis results for the cable Pair 1
on Ethernet Access Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.19 |
| cmEthernetAccPortIfIndex This object has the same value as ifIndex for
Ethernet Access Port. An integer index value used to
uniquely identify this Ethernet Access Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.1.1.2 |
| cmEthernetAccPortDiagnosePair2Cond This object provides diagnosis results for the cable Pair 2
on Ethernet Access Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.20 |
| cmEthernetAccPortDiagnosePair3Cond This object provides diagnosis results for the cable Pair 3
on Ethernet Access Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.21 |
| cmEthernetAccPortDiagnosePair4Cond This object provides diagnosis results for the cable Pair 4
on Ethernet Access Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.22 |
| cmEthernetAccPortDiagnoseAutoNegCond This object provides auto negotiation results of the diagnosis
test on Ethernet Access Port. | column | CmDiagAutoNegCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.23 |
| cmEthernetAccPortDiagnoseLpbkCond This object provides port loopback results of the diagnosis
test on Ethernet Access Port. | column | CmDiagLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.24 |
| cmEthernetAccPortDiagnoseEfmLpbkCond This object provides remote EFM loopback results of the diagnosis
test on Ethernet Access Port. | column | CmDiagEfmOamLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.25 |
| cmEthernetAccPortDiagnoseResult This object provides results of the diagnosis
test in string form on Ethernet Access Port. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.26 |
| cmEthernetAccPortDiagnoseTestStatus This object provides the current status of the diagnosis
test on Ethernet Access Port. | column | CmDiagTestStatus | .1.3.6.1.4.1.2544.1.12.4.1.1.1.27 |
| cmEthernetAccPortDiagnoseTestTime This object provides the time when diagnosis test was last executed. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.1.1.28 |
| cmEthernetAccPortLoopbackConfig This object allows to initiate loopbacks on
on the Ethernet Access Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.29 |
| cmEthernetAccPortEntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.1.1.3 |
| cmEthernetAccPortLoopbackStatus This object provides status of the current loopback
on the Ethernet Access Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.30 |
| cmEthernetAccPortLoopbackTime This object allows to specify time for timed-loopbacks on
on the Ethernet Access Port. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.31 |
| cmEthernetAccPortLoopbackSwapSADA This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped. | column | CmSwapSADAType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.32 |
| cmEthernetAccPortOuterVlanLoopbackMask This object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.33 |
| cmEthernetAccPortOuterVlanLoopback1 This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.34 |
| cmEthernetAccPortOuterVlanLoopback2 This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.35 |
| cmEthernetAccPortOuterVlanLoopback3 This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.36 |
| cmEthernetAccPortInnerVlanLoopbackMask This object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.37 |
| cmEthernetAccPortInnerVlanLoopback1 This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.38 |
| cmEthernetAccPortInnerVlanLoopback2 This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.39 |
| cmEthernetAccPortAdminState This object represents the Administrative State of the Ethernet
Access Port. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.1.1.4 |
| cmEthernetAccPortInnerVlanLoopback3 This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.1.1.40 |
| cmEthernetAccPortLinkLossFwdEnabled This object allows enabling/disabling link loss forwarding
on the Ethernet Access Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.41 |
| cmEthernetAccPortLinkLossFwdSignalType deprecated This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled.
This object is applicable o… | column | CmLinkLossFwdSignalType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.42 |
| cmEthernetAccPortLinkLossFwdTriggerTypes This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled. | column | CmLinkLossFwdTriggerTypes | .1.3.6.1.4.1.2544.1.12.4.1.1.1.43 |
| cmEthernetAccPortLinkLossFwdDelay This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.44 |
| cmEthernetAccPortLinkLossFwdActive This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.45 |
| cmEthernetAccPortLinkLossFwdPartnerEnabled This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.46 |
| cmEthernetAccPortLinkLossFwdLocalLinkId This object allows configuration of the Local Link Id on
Ethernet access port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.47 |
| cmEthernetAccPortLinkLossFwdRemoteLinkIds This object allows enabling/disabling Remote Link Ids
on Ethernet access port. By setting the appropriate bit
positions, the Ethernet access port is able to distinguish
the remot… | column | CmRemoteLinkIds | .1.3.6.1.4.1.2544.1.12.4.1.1.1.48 |
| cmEthernetAccPortOamId OAM Id. This is unique EFM OAM sublayer port id. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.49 |
| cmEthernetAccPortOperationalState This object represents the Operational State of the Ethernet
Access Port. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.1.1.5 |
| cmEthernetAccPortOamAdminDisposition deprecated Ethernet Access Port's EFM OAM Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release 4.1, this proper… | column | CmControlProtocolDispType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.50 |
| cmEthernetAccPortOamDiscoveryState Ethernet Access Port's OAM discovery state. | column | CmOamDiscoveryState | .1.3.6.1.4.1.2544.1.12.4.1.1.1.51 |
| cmEthernetAccPortOamLocalVarRtrvsEnabled This object allows specification of whether the Ethernet
Access Port supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.52 |
| cmEthernetAccPortOamLocalLinkEventsEnabled This object allows specification of whether the Ethernet
Access Port supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.53 |
| cmEthernetAccPortOamLocalOamLoopbacksSupported This object allows specification of whether the Ethernet
Access Port is capable of OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.54 |
| cmEthernetAccPortOamLocalUnidirSupportEnabled This object allows specification of whether the Ethernet
Access Port is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.55 |
| cmEthernetAccPortOamLocalMaxPDUSize This object represents the largest OAMPDU, in octets,
supported by the Ethernet Access Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two is… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.56 |
| cmEthernetAccPortOamLocalMode This object allows to configure the OAM sublayer entity in
either Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.1.1.57 |
| cmEthernetAccPortOamRemoteVarRtrvsEnabled This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.59 |
| cmEthernetAccPortSecondaryState This object represents the Secondary State of the Ethernet
Access Port. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.1.1.6 |
| cmEthernetAccPortOamRemoteLinkEventsEnabled This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.60 |
| cmEthernetAccPortOamRemoteOamLoopbacksSupported This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.61 |
| cmEthernetAccPortOamRemoteUnidirSupportEnabled This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.62 |
| cmEthernetAccPortOamRemoteMaxPDUSize This object allows retrieval of the remote OAM
entity maximum OAMPDU size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.63 |
| cmEthernetAccPortOamRemoteMode This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.1.1.64 |
| cmEthernetAccPortMode This object allows specification of whether the
Ethernet Access Port is in a connection-oriented
(offering VLAN based services) mode or connection-less
(offering MAC based serv… | column | CmEthernetSvcPortMode | .1.3.6.1.4.1.2544.1.12.4.1.1.1.65 |
| cmEthernetAccPortSvcType This object allows specification of whether the
Ethernet Access Port provides transparent port based services,
or multi-flow VLAN based services. | column | CmEthernetSvcType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.66 |
| cmEthernetAccPortRxPauseDisposition deprecated This object allows management of RX pause frames on
Ethernet Access port. This object is applicable only
for FSP150CM Release 3.1.
This object is deprecated henceforth. With FS… | column | CmControlProtocolDispType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.67 |
| cmEthernetAccPortTxPauseEnabled This object allows enabling/disabling transmit pause frames on
Ethernet Access port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.68 |
| cmEthernetAccPortAfpType This object allows specification of the Acceptable Frame Policy on
Ethernet Access port. Users can specify whether the port supports
only tagged frames, only untagged frames or bo… | column | CmAfpType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.69 |
| cmEthernetAccPortMTU This object provides the MTU on the Ethernet Access Port.
The object is made read-write for FSP150CC devices. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.7 |
| cmEthernetAccPortMDIXStatus This object provides the current MDIX status of the
Ethernet Access port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.70 |
| cmEthernetAccPortSfpReach This object provides the SFP Reach in meters.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.71 |
| cmEthernetAccPortSfpLaserWaveLength This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetAccPortMediaType is fiber. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.72 |
| cmEthernetAccPortSfpMediaType This object provides the SFP Media Type.
This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpMediaType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.73 |
| cmEthernetAccPortOamEnabled This object allows to manage the EFM OAM on Ethernet Access Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.74 |
| cmEthernetAccPortOamAdminState This object provides the EFM OAM Admin State. | column | CmOamAdminState | .1.3.6.1.4.1.2544.1.12.4.1.1.1.75 |
| cmEthernetAccPortShapingEnabled This object allows to manage the Access Port Shaping.
When enabled, values in cmEthernetAccPortShapedSpeedLo and
cmEthernetAccPortShapedSpeedHi are applicable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.76 |
| cmEthernetAccPortShapedSpeedLo This object allows to specify the lower 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.77 |
| cmEthernetAccPortShapedSpeedHi This object allows to specify the higher 32 bits of
the Access Port Shaped speed. This value is applicable
when cmEthernetAccPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.78 |
| cmEthernetAccPortQinQEtherType This object allows to specify the Q-in-Q Ether Type
on the Access Port. Setting this value to 0 will disable
the Q-in-Q override on the Access Port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.1.1.79 |
| cmEthernetAccPortMediaType This object represents the type of Ethernet Media on the
Ethernet Access Port. | column | CM-COMMON-MIBEthernetMediaType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.8 |
| cmEthernetAccPortRxPauseEnabled This object allows to enable/disable the RX PAUSE
on the Access Port. This object is not applicable for FSP150CM NTU Card.
On NTU Card cmEthernetAccPortRxPauseDisposition object … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.80 |
| cmEthernetAccPortAutoDiagEnabled This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.81 |
| cmEthernetAccPortLinkLossFwdTxActionType This object allows to specify the Access Port's behavior when
link loss forwarding trigger events occur on the Network Port.
This provides ability to configure per access port LLF… | column | CmLinkLossFwdTxActionType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.82 |
| cmEthernetAccPortLinkLossFwdRxRLDLinkIds This object provides the received Remote Link IDs in
EFM RLD messages on the Access Port. | column | CmRemoteLinkIds | .1.3.6.1.4.1.2544.1.12.4.1.1.1.83 |
| cmEthernetAccPortN2AVlanTrunkingEnabled This object allows to enable or disable the VLAN trunking on
Ethernet Access port. Disabling VLAN trunking removes all
VLAN tags before transmitting traffic out of the access port… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.84 |
| cmEthernetAccPortA2NPushPVIDEnabled This object allows to specify whether cmEthernetAccPortPortVlanId
value will be PUSHed on untagged frames or not in the
Access to Network direction. This object is only applicab… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.85 |
| cmEthernetAccPortN2APopPVIDEnabled This object allows to specify whether cmEthernetAccPortPortVlanId
value will be POPed in the
Network to Access direction. This object is only applicable
for connection-oriented… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.86 |
| cmEthernetAccPortPortVlanId This object allows to specify the Ethernet Access Port VLAN Id
to PUSH on untagged frames in the Access to Network
direction. This object is only applicable for connection-orien… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.4.1.1.1.87 |
| cmEthernetAccPortPortVlanPriority This object allows to specify the Ethernet Access Port VLAN Priority
for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId)
on untagged frames in the Access to Netwo… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.4.1.1.1.88 |
| cmEthernetAccPortPrioMapMode This object allows to specify the Ethernet Access Port
Priority Mapping Mode used for classification of frames.
This object is only applicable for connection-oriented,
evpl servi… | column | CM-COMMON-MIBPriorityMapMode | .1.3.6.1.4.1.2544.1.12.4.1.1.1.89 |
| cmEthernetAccPortConfigSpeed This object allows to configure the speed of the
Ethernet Access Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.1.1.9 |
| cmEthernetAccPortSyncEEnabled This object allows to specify whether the Ethernet Access Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.90 |
| cmEthernetAccPortQLModeEnabled This object allows to specify whether the Ethernet Access Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cm… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.91 |
| cmEthernetAccPortExpectedQL This object allows to specify the expected QL when the
Ethernet Access Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when cm… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.1.1.92 |
| cmEthernetAccPortAssumedQL This object allows to specify the assumed QL on the
Ethernet Access Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaningf… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.1.1.93 |
| cmEthernetAccPortReceivedQL This object provides the Received QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable.This object is only ap… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.1.1.94 |
| cmEthernetAccPortTransmitQL This object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable. This object is onl… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.1.1.95 |
| cmEthernetAccPortDeiEnable deprecated This is a port level control to reset the DEI
(Drop Eligibility Indicator) bit in the S-Tag,
if the downstream equipment supports S-Tag TPID (EtherType) but
cannot handle DEI bi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.1.1.96 |
| cmEthernetAccPortPcpDEEncType This is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag. | column | PcpDEEncType | .1.3.6.1.4.1.2544.1.12.4.1.1.1.97 |
| cmEthernetAccPortPcpDEPairsAction This object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmAccPor… | column | PcpDEPairsAction | .1.3.6.1.4.1.2544.1.12.4.1.1.1.98 |
| cmEthernetAccPortSSMRemoteMacAddress This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.1.1.99 |