bitsPortSquelchQL

CM-FACILITY-MIB · .1.3.6.1.4.1.2544.1.12.4.1.16.1.18
MIB view Table view

Object

column r/w F3-SYNC-MIBSSMQualityLevel 
This object allows to set the Squelch QL for the BITS-OUT port. 
The Squelch QL is only meaningful if the QL Mode is Enabled. 
The Squelch QL is used to determine whether or not to squelch 
the output of the BITS-OUT port. If the system's QL is lower 
than the Squelch QL, the output is squelched.
If the BITS port's QL Mode is disabled, then the received 
QL value is not applicable.

Context

MIB
CM-FACILITY-MIB
OID
.1.3.6.1.4.1.2544.1.12.4.1.16.1.18
Type
column
Access
readwrite
Status
current
Parent
bitsPortEntry
Table
bitsPortTable
Siblings
19

Syntax

F3-SYNC-MIBSSMQualityLevel
Source
F3-SYNC-MIBSSMQualityLevel
Base type
Enumeration

Values & Constraints

Type Values
0not-applicable
1ql-dnu
2ql-eec1
3ql-eec2
4ql-inv
5ql-inv0
6ql-inv1
7ql-inv2
8ql-inv3
9ql-inv5
10ql-inv7
11ql-inv8
12ql-inv9
13ql-inv10
14ql-inv11
15ql-inv12
16ql-none
17ql-nsupp
18ql-prc
19ql-prov
20ql-prs
21ql-smc
22ql-ssu-a
23ql-ssu-b
24ql-st2
25ql-st3e
26ql-stu
27ql-tnc
28ql-unc
29ql-failed
30ql-inv6
31ql-inv13
32ql-inv14
33ql-dus
34ql-na

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bitsPortTypeIndex
An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.16.1.1
bitsPortLineCode
This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When …
columnBitsPortLineCode.1.3.6.1.4.1.2544.1.12.4.1.16.1.10
bitsPortFrameFormat
This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When t…
columnBitsFrameFormat.1.3.6.1.4.1.2544.1.12.4.1.16.1.11
bitsPortSaBitDesignation
This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is …
columnSaBitDesignation.1.3.6.1.4.1.2544.1.12.4.1.16.1.12
bitsPortQLModeEnabled
This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow pr…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.16.1.13
bitsPortExpectedQL
This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality Level on the port…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.16.1.14
bitsPortAssumedQL
This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.16.1.15
bitsPortReceivedQL
This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.16.1.16
bitsPortTransmitQL
This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable.
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.16.1.17
bitsPortLineBuildOut
This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1.
columnLineBuildOut.1.3.6.1.4.1.2544.1.12.4.1.16.1.19
bitsPortIndex
An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bi…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.16.1.2
bitsPortImpedance
This object provides the impedance mode for the BITS-OUT port.
columnBitsPortImpedanceMode.1.3.6.1.4.1.2544.1.12.4.1.16.1.20
bitsPortIfIndex
This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2544.1.12.4.1.16.1.3
bitsPortEntityIndex
Entity Index from ENTITY-MIB for this port.
columnENTITY-MIBPhysicalIndex.1.3.6.1.4.1.2544.1.12.4.1.16.1.4
bitsPortAdminState
This object represents the Administrative State of the BITS Port.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.4.1.16.1.5
bitsPortOperationalState
This object represents the Operational State of the BITS Port.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.4.1.16.1.6
bitsPortSecondaryState
This object represents the Secondary State of the BITS Port.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.4.1.16.1.7
bitsPortType
This object represents the BITS Port Type.
columnBitsPortType.1.3.6.1.4.1.2544.1.12.4.1.16.1.8
bitsPortLineType
This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode.
columnBitsPortLineType.1.3.6.1.4.1.2544.1.12.4.1.16.1.9
Indexes
ObjectTypeSyntaxOID
CM-ENTITY-MIBneIndex
An arbitrary integer index value used to uniquely identify a NetworkElement.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.3.1.1.1.1
CM-ENTITY-MIBshelfIndex
An integer index value used to uniquely identify a Shelf within a NetworkElement.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.3.1.2.1.1
CM-ENTITY-MIBslotIndex
The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.3.1.3.1.1
cmEthernetNetPortIndex
An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shel…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.1
cmEthernetNetPortClbIndex
An integer index value used to uniquely identify this Cable Length Benchmark Entry specification.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.19.1.1