cmEthernetNetPortMediaTypeAutoSelected
CM-FACILITY-MIB ·
.1.3.6.1.4.1.2544.1.12.4.1.7.1.105
Object
column
CM-COMMON-MIBEthernetMediaType
This object provides the auto selected Ethernet Media of the Ethernet Network Port.
Context
- MIB
- CM-FACILITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.4.1.7.1.105- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmEthernetNetPortEntry
- Table
- cmEthernetNetPortTable
- Siblings
- 109
Syntax
CM-COMMON-MIBEthernetMediaType
- Source
- CM-COMMON-MIBEthernetMediaType
- Base type
Enumeration
Values & Constraints
Object Constraints
range: 0-63
Type Values
0 | not-applicable |
1 | copper |
2 | fiber |
3 | coppersfp |
4 | auto |
5 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmEthernetNetPortIndex An integer index value used to uniquely identify
this Ethernet Network Port within a card.
Note that each Ethernet Network Port is uniquely identified
by the indices neIndex, shel… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.1 |
| cmEthernetNetPortNegotiatedSpeed This object provides the negotiated speed of the
Ethernet Network Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.7.1.10 |
| cmEthernetNetPortRxDeiOuterTagType This object allows to specify
the Receive DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.100 |
| cmEthernetNetPortTxDeiOuterTagType This object allows to specify
the Transmit DEI Outer Tag Type. | column | DeiOuterTagType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.101 |
| cmEthernetNetPortLaserWDMChannel Channel number of WDM tunable XFP setting. | column | SfpChannelIdentifier | .1.3.6.1.4.1.2544.1.12.4.1.7.1.102 |
| cmEthernetNetPortLaserIsTunable Channel number of WDM tunable XFP setting. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.103 |
| cmEthernetNetPortLaserFrequency Channel number of WDM tunable XFP setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.104 |
| cmEthernetNetPortLowLatencyQueuingEnabled This object allows to Enable/Disable the Low Latency Queuing on
the Ethernet Network Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.106 |
| cmEthernetNetPortDiagnosticMacAddress This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.7.1.107 |
| cmEthernetNetPortIngressCOSPriority deprecated Indicates the VLAN tag to use for PCP Priority to COS mapping
when the port Priority Map Mode is 802.1p. Supported values are
inner-vlantag and outer-vlantag. This attribute is on… | column | CM-COMMON-MIBVlanTagType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.108 |
| cmEthernetNetPortDefaultCOS deprecated The COS assigned to a frame that does not have a valid COS identifier
for the Priority Map Mode of the port. This attribute is only applicable
on products when Flowpoint Model is… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.109 |
| cmEthernetNetPortMDIXType This object allows management of MDIX property on
Ethernet Network Port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.11 |
| cmEthernetNetPortTrafficModel The Traffic Management connection model available for the port.
- accessFlow: NID Traffic Connection model.
- flowpoint: Multipoint and Aggregation Traffic Connection model. | column | EthernetPortTrafficModel | .1.3.6.1.4.1.2544.1.12.4.1.7.1.110 |
| cmEthernetNetPortJumboFramesEnabled This object allows enabling/disabling jumbo frames support on
the Ethernet Network Port. This object is only applicable for
Ethernet Network Port on R3.1CM NTU Card. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.12 |
| cmEthernetNetPortSfpVendorName This object provides the vendor name of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.13 |
| cmEthernetNetPortSfpPartNumber This object provides the part number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.14 |
| cmEthernetNetPortSfpSerialNumber This object provides the serial number of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.15 |
| cmEthernetNetPortSfpDateOfManufacture This object provides the date of manufacture of the SFP.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.7.1.16 |
| cmEthernetNetPortSfpConnectorValue This object provides the SFP connector value.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpConnectorValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.17 |
| cmEthernetNetPortInitiateDiag This object allows to initiate Etherjack diagnosis on the
Ethernet Network Port. | column | CmEthernetDiagAction | .1.3.6.1.4.1.2544.1.12.4.1.7.1.18 |
| cmEthernetNetPortDiagnosePair1Cond This object provides diagnosis results for the cable Pair 1
on Ethernet Network Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.19 |
| cmEthernetNetPortIfIndex This object has the same value as ifIndex for
Ethernet Network Port. An integer index value used to
uniquely identify this Ethernet Network Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2544.1.12.4.1.7.1.2 |
| cmEthernetNetPortDiagnosePair2Cond This object provides diagnosis results for the cable Pair 2
on Ethernet Network Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.20 |
| cmEthernetNetPortDiagnosePair3Cond This object provides diagnosis results for the cable Pair 3
on Ethernet Network Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.21 |
| cmEthernetNetPortDiagnosePair4Cond This object provides diagnosis results for the cable Pair 4
on Ethernet Network Port. | column | CmDiagCableCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.22 |
| cmEthernetNetPortDiagnoseAutoNegCond This object provides auto negotiation results of the diagnosis
test on Ethernet Network Port. | column | CmDiagAutoNegCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.23 |
| cmEthernetNetPortDiagnoseLpbkCond This object provides port loopback results of the diagnosis
test on Ethernet Network Port. | column | CmDiagLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.24 |
| cmEthernetNetPortDiagnoseEfmLpbkCond This object provides remote EFM loopback results of the diagnosis
test on Ethernet Network Port. | column | CmDiagEfmOamLpbkCondType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.25 |
| cmEthernetNetPortDiagnoseResult This object provides results of the diagnosis
test in string form on Ethernet Network Port. | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.26 |
| cmEthernetNetPortDiagnoseTestStatus This object provides the current status of the diagnosis
test on Ethernet Access Port. | column | CmDiagTestStatus | .1.3.6.1.4.1.2544.1.12.4.1.7.1.27 |
| cmEthernetNetPortDiagnoseTestTime This object provides the time when diagnosis test was last executed. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.4.1.7.1.28 |
| cmEthernetNetPortLoopbackConfig This object allows to initiate loopbacks on
on the Ethernet Network Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.29 |
| cmEthernetNetPortEntityIndex Entity Index from ENTITY-MIB for this port. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.4.1.7.1.3 |
| cmEthernetNetPortLoopbackStatus This object provides status of the current loopback
on the Ethernet Network Port. | column | CmLoopbackType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.30 |
| cmEthernetNetPortLoopbackTime This object allows to specify time for timed-loopbacks on
on the Ethernet Network Port. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.31 |
| cmEthernetNetPortLoopbackSwapSADA This object allows to specify whether or not the loopbacked
frame will have the Source Address and Destination Address
swapped. | column | CmSwapSADAType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.32 |
| cmEthernetNetPortOuterVlanLoopbackMask This object allows specification of the outer VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.33 |
| cmEthernetNetPortOuterVlanLoopback1 This object allows specification of the outer VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.34 |
| cmEthernetNetPortOuterVlanLoopback2 This object allows specification of the outer VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.35 |
| cmEthernetNetPortOuterVlanLoopback3 This object allows specification of the outer VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.36 |
| cmEthernetNetPortInnerVlanLoopbackMask This object allows specification of the inner VLANs to be
looped back when port is in vlan(terminal/facility)
loopback configuration. Only 3 VLANs can be specified
for vlan loo… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.37 |
| cmEthernetNetPortInnerVlanLoopback1 This object allows specification of the inner VLAN 1 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.38 |
| cmEthernetNetPortInnerVlanLoopback2 This object allows specification of the inner VLAN 2 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.39 |
| cmEthernetNetPortAdminState This object represents the Administrative State of the Ethernet
Network Port. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.4.1.7.1.4 |
| cmEthernetNetPortInnerVlanLoopback3 This object allows specification of the inner VLAN 3 to be
looped back when port is in vlan(terminal/facility)
loopback configuration. This is valid only if the
corresponding bi… | column | OctetString | .1.3.6.1.4.1.2544.1.12.4.1.7.1.40 |
| cmEthernetNetPortLinkLossFwdEnabled This object allows enabling/disabling link loss forwarding
on the Ethernet Network Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.41 |
| cmEthernetNetPortLinkLossFwdSignalType deprecated This object allows definition of the link loss forwarding
signalling type. This is applicable only if
cmEthernetNetPortLinkLossFwdEnabled is enabled.
This object is only valid f… | column | CmLinkLossFwdSignalType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.42 |
| cmEthernetNetPortLinkLossFwdTriggerTypes This object allows definition of the link loss forwarding
trigger types. This is applicable only if
cmEthernetAccPortLinkLossFwdEnabled is enabled. | column | CmLinkLossFwdTriggerTypes | .1.3.6.1.4.1.2544.1.12.4.1.7.1.43 |
| cmEthernetNetPortLinkLossFwdDelay This object allows specification of the delay between
detection of link loss and signalling of link loss forwarding.
Time specified is in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.44 |
| cmEthernetNetPortLinkLossFwdActive This object provides the link loss forwarding status indicating
if link loss forwarding is currently being signaled via
the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.45 |
| cmEthernetNetPortLinkLossFwdPartnerEnabled This object provides the indication of a link partners ability
to support link loss forwarding via EFM, i.e. from
received organization specific OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.46 |
| cmEthernetNetPortLinkLossFwdLocalLinkId This object allows configuration of the Local Link Id on
Ethernet Network port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.47 |
| cmEthernetNetPortLinkLossFwdRemoteLinkIds This object allows enabling/disabling Remote Link Ids
on Ethernet Network port. By setting the appropriate bit
positions, the Ethernet Network port is able to distinguish
the rem… | column | CmRemoteLinkIds | .1.3.6.1.4.1.2544.1.12.4.1.7.1.48 |
| cmEthernetNetPortOamId OAM Id. This is unique EFM OAM sublayer port id. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.49 |
| cmEthernetNetPortOperationalState This object represents the Operational State of the Ethernet
Network Port. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.4.1.7.1.5 |
| cmEthernetNetPortOamAdminDisposition deprecated Ethernet Network Port's EFM OAM Administrative Disposition.
This object is applicable only for FSP150CM Release 3.1.
This object is deprecated henceforth.
With FSP150CC Release… | column | CmControlProtocolDispType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.50 |
| cmEthernetNetPortOamDiscoveryState Ethernet Network Port's OAM discovery state. | column | CmOamDiscoveryState | .1.3.6.1.4.1.2544.1.12.4.1.7.1.51 |
| cmEthernetNetPortOamLocalVarRtrvsEnabled This object allows specification of whether the Ethernet
Network Port supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.52 |
| cmEthernetNetPortOamLocalLinkEventsEnabled This object allows specification of whether the Ethernet
Network Port supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.53 |
| cmEthernetNetPortOamLocalOamLoopbacksSupported This object allows specification of whether the Ethernet
Network Port is capable of OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.54 |
| cmEthernetNetPortOamLocalUnidirSupportEnabled This object allows specification of whether the Ethernet
Network Port is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.55 |
| cmEthernetNetPortOamLocalMaxPDUSize This object represents the largest OAMPDU, in octets,
supported by the Ethernet Network Port. This value is
compared to the remote Maximum PDU Size and the smaller of
the two i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.56 |
| cmEthernetNetPortOamLocalMode This object allows to configure the OAM sublayer entity in
either Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.7.1.57 |
| cmEthernetNetPortOamRemoteMacAddress This object allows retrieval of the Remote Mac Address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.7.1.58 |
| cmEthernetNetPortOamRemoteVarRtrvsEnabled This object allows retrieval of whether the remote OAM
entity supports sending variable response OAMPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.59 |
| cmEthernetNetPortSecondaryState This object represents the Secondary State of the Ethernet
Network Port. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.4.1.7.1.6 |
| cmEthernetNetPortOamRemoteLinkEventsEnabled This object allows retrieval of whether the remote OAM
entity supports interpreting Link Events. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.60 |
| cmEthernetNetPortOamRemoteOamLoopbacksSupported This object allows retrieval of whether the remote OAM
entity supports OAM remote loopback mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.61 |
| cmEthernetNetPortOamRemoteUnidirSupportEnabled This object allows retrieval of whether the remote
OAM entity is capable of sending OAMPDUs when the receive path
is non-operational. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.62 |
| cmEthernetNetPortOamRemoteMaxPDUSize This object allows retrieval of the remote OAM
entity maximum OAMPDU size. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.63 |
| cmEthernetNetPortOamRemoteMode This object allows to retrieve whether the remote OAM
sublayer entity is either in Active or Passive mode. | column | CmOamMode | .1.3.6.1.4.1.2544.1.12.4.1.7.1.64 |
| cmEthernetNetPortRxPauseDisposition This object allows enabling/disabling receive pause frames on
Ethernet Network port. This object is not applicable
for FSP150CC Release 4.1 products. | column | CmControlProtocolDispType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.65 |
| cmEthernetNetPortTxPauseEnabled This object allows enabling/disabling transmit pause frames on
Ethernet Network port.
This object is not applicable for FSP150CC Release 4.1 products. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.66 |
| cmEthernetNetPortAfpType This object allows specification of the Acceptable Frame Policy on
Ethernet Network port. Users can specify whether the port supports
only tagged frames, only untagged frames or b… | column | CmAfpType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.67 |
| cmEthernetNetPortMDIXStatus This object provides the current MDIX status of the
Ethernet Network port. | column | CmEthernetMDIXType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.68 |
| cmEthernetNetPortSfpReach This object provides the SFP Reach in meters.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.69 |
| cmEthernetNetPortMTU This object provides the MTU on the Ethernet Network Port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.7 |
| cmEthernetNetPortSfpLaserWaveLength This object provides the SFP Laser Wave Length in nano meters.
This is applicable only when cmEthernetNetPortMediaType is fiber. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.70 |
| cmEthernetNetPortSfpMediaType This object provides the SFP Media Type.
This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. | column | CM-COMMON-MIBSfpMediaType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.71 |
| cmEthernetNetPortOamEnabled This object allows to manage the EFM OAM on Ethernet Network Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.72 |
| cmEthernetNetPortOamAdminState This object provides the EFM OAM Admin State. | column | CmOamAdminState | .1.3.6.1.4.1.2544.1.12.4.1.7.1.73 |
| cmEthernetNetPortShapingEnabled This object allows to manage the Network Port Shaping.
When enabled, values in cmEthernetNetPortShapedSpeedLo and
cmEthernetNetPortShapedSpeedHi are applicable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.74 |
| cmEthernetNetPortShapedSpeedLo This object allows to specify the lower 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.75 |
| cmEthernetNetPortShapedSpeedHi This object allows to specify the higher 32 bits of
the Network Port Shaped speed. This value is applicable
when cmEthernetNetPortShapingEnabled is enabled. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.76 |
| cmEthernetNetPortQinQEtherType This object allows to specify the Q-in-Q Ether Type
on the Network Port. Setting this value to 0 will disable
the Q-in-Q override on the Network Port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.4.1.7.1.77 |
| cmEthernetNetPortLinkLossFwdTxActionType This object allows to specify the Network Port's behavior when
link loss forwarding trigger events occur on the Access Port. | column | CmLinkLossFwdTxActionType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.78 |
| cmEthernetNetPortLinkLossFwdRxRLDLinkIds This object provides the received Remote Link IDs in
EFM RLD messages on the Network Port. | column | CmRemoteLinkIds | .1.3.6.1.4.1.2544.1.12.4.1.7.1.79 |
| cmEthernetNetPortMediaType This object represents the type of Ethernet Media on the
Ethernet Network Port. | column | CM-COMMON-MIBEthernetMediaType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.8 |
| cmEthernetNetPortAutoDiagEnabled This object allows to enable or disable the automatic
Cable Diagnostic tests when the cable is removed from the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.80 |
| cmEthernetNetPortSyncEEnabled This object allows to specify whether the Ethernet Network Port
can be enabled/disabled for Synchronous Ethernet. This object
is only applicable for Synchronous Ethernet capable … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.81 |
| cmEthernetNetPortQLModeEnabled This object allows to specify whether the Ethernet Network Port
can be enabled/disabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when c… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.82 |
| cmEthernetNetPortExpectedQL This object allows to specify the expected QL when the
Ethernet Network Port is enabled for QL Mode. This object
is only applicable for Synchronous Ethernet capable ports,
when c… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.7.1.83 |
| cmEthernetNetPortAssumedQL This object allows to specify the assumed QL on the
Ethernet Network Port. This object is only applicable for
Synchronous Ethernet capable ports.
The Assumed QL is only meaning… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.7.1.84 |
| cmEthernetNetPortReceivedQL This object provides the Received QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable.This object is only ap… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.7.1.85 |
| cmEthernetNetPortTransmitQL This object provides the Transmitted QL value for the Ethernet port.
If the Ethernet port's QL Mode is disabled, then the received
QL value is not applicable. This object is onl… | column | F3-SYNC-MIBSSMQualityLevel | .1.3.6.1.4.1.2544.1.12.4.1.7.1.86 |
| cmEthernetNetPortPrioMapMode This object provides the Priority Mapping Mode used for
classification of frames. | column | CM-COMMON-MIBPriorityMapMode | .1.3.6.1.4.1.2544.1.12.4.1.7.1.87 |
| cmEthernetNetPortDeiEnable deprecated This is a port level control to reset the DEI
(Drop Eligibility Indicator) bit in the S-Tag,
if the downstream equipment supports S-Tag TPID (EtherType) but
cannot handle DEI bi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.88 |
| cmEthernetNetPortPcpDEEncType This is a port level control that specifies the mode of drop
eligibility encoding in PCP bits of the VLAN tag. | column | PcpDEEncType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.89 |
| cmEthernetNetPortConfigSpeed This object allows to configure the speed of the
Ethernet Network Port. | column | CM-COMMON-MIBEthernetPortSpeed | .1.3.6.1.4.1.2544.1.12.4.1.7.1.9 |
| cmEthernetNetPortPcpDEPairsAction This object allows the SNMP user to manage the Priority
Code Point (PCP) Drop Eligibility Pairs. When the
cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d,
the cmNetPor… | column | PcpDEPairsAction | .1.3.6.1.4.1.2544.1.12.4.1.7.1.90 |
| cmEthernetNetPortSSMRemoteMacAddress This object allows retrieval of the Remote Mac Address, when
the port is peering using SSM. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.7.1.91 |
| cmEthernetNetPortXgePhyType This object allows to specify the PHY type of 10G Ethernet Port.
10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY
and port rate in this mode is 10Gbps… | column | XgePhyType | .1.3.6.1.4.1.2544.1.12.4.1.7.1.92 |
| cmEthernetNetPortLoopbackSourceMacControlEnabled This object allows to Enable/Disable the Net Port Source MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.93 |
| cmEthernetNetPortLoopbackDestMacControlEnabled This object allows to Enable/Disable the Net Port Destination MAC
Address frame matching criteria for all streams.
Not applicable for: efm-oam-remote, efm-oam-remote-timed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.94 |
| cmEthernetNetPortLoopbackSourceMacAddress This object allows to set Net Port Source MAC Address for frame
matching when Net Port Source MAC Control is enabled. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.7.1.95 |
| cmEthernetNetPortLoopbackDestMacAddress This object allows to set Net Port Destination MAC Address for frame
matching when Net Port Destination MAC Control is enabled. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.4.1.7.1.96 |
| cmEthernetNetPortLoopbackBlockingEnabled This object allows frame blocking when loopback is active.
- True: Blocks frames in the non-loopback direction
that match the PORT or VLAN received in the
non-loopback direc… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.4.1.7.1.97 |
| cmEthernetNetPortRxDeiAction This object allows to specify
the Receive DEI Action. | column | RxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.7.1.98 |
| cmEthernetNetPortTxDeiAction This object allows to specify
the Transmit DEI Action. | column | TxDeiAction | .1.3.6.1.4.1.2544.1.12.4.1.7.1.99 |