e1t1IdlePatternProfile

CM-FACILITY-MIB · .1.3.6.1.4.1.2544.1.12.4.1.50.1.20
MIB view Table view

Object

column r/w SNMPv2-TCVariablePointer 
This object allows selecting Idle Pattern Profile for the E1/T1 interface.
Idle Patter Profile is represented by an object in the 
f3Pwe3IdlePatternProfileTable

Context

MIB
CM-FACILITY-MIB
OID
.1.3.6.1.4.1.2544.1.12.4.1.50.1.20
Type
column
Access
readwrite
Status
current
Parent
e1t1Entry
Table
e1t1Table
Siblings
21

Syntax

SNMPv2-TCVariablePointer
Source
SNMPv2-TCVariablePointer
Base type
ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
e1t1ParentIfIndex
This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1ParentIfIndex shall have …
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2544.1.12.4.1.50.1.1
e1t1LoopbackTime
This object allows to specify time for timed-loopbacks on on the E1/T1.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.50.1.10
e1t1RemoteLoopbackRequest
This object allows to specify to repond the remote loopback request or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.50.1.11
e1t1InsertingAIS
This object allows to insert AIS out from E1/T1 when it is in maintenance state.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.50.1.12
e1t1RowStatus
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each w…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2544.1.12.4.1.50.1.13
e1t1LineType
This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode.
columnE1T1LineType.1.3.6.1.4.1.2544.1.12.4.1.50.1.14
e1t1LineCode
This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When…
columnE1T1LineCode.1.3.6.1.4.1.2544.1.12.4.1.50.1.15
e1t1FrameFormat
This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and the default value is…
columnE1T1FrameFormat.1.3.6.1.4.1.2544.1.12.4.1.50.1.16
e1t1LineBuildOut
This object represents Line Build Out on E1/T1 port.
columnLineBuildOut.1.3.6.1.4.1.2544.1.12.4.1.50.1.17
e1t1TimingDomain
This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in the f3SyncTable
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.50.1.18
e1t1RcvSensitivity
This object allows configuring the reciever sensitivity based on expected signal strength
columnE1T1RcvSensitivity.1.3.6.1.4.1.2544.1.12.4.1.50.1.19
e1t1Index
Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.50.1.2
e1t1LoopbackProfile
This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.50.1.21
e1t1RelatedContainerId
This object describes the related container VCG.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.4.1.50.1.22
e1t1IfIndex
This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2544.1.12.4.1.50.1.3
e1t1EntityIndex
Entity Index from ENTITY-MIB for this port.
columnENTITY-MIBPhysicalIndex.1.3.6.1.4.1.2544.1.12.4.1.50.1.4
e1t1AdminState
This object represents the Administrative State of the E1/T1.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.4.1.50.1.5
e1t1OperationalState
This object represents the Operational State of the E1/T1.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.4.1.50.1.6
e1t1SecondaryState
This object represents the Secondary State of the E1/T1.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.4.1.50.1.7
e1t1LoopbackConfig
This object allows to initiate loopbacks on on the E1/T1.
columnCmLoopbackType.1.3.6.1.4.1.2544.1.12.4.1.50.1.8
e1t1LoopbackStatus
This object provides status of the current loopback on the E1/T1.
columnCmLoopbackType.1.3.6.1.4.1.2544.1.12.4.1.50.1.9