cmEthernetNetPortLaserWDMChannel

CM-FACILITY-MIB · .1.3.6.1.4.1.2544.1.12.4.1.7.1.102
MIB view Table view

Object

column r/w SfpChannelIdentifier 
Channel number of WDM tunable XFP setting.

Context

MIB
CM-FACILITY-MIB
OID
.1.3.6.1.4.1.2544.1.12.4.1.7.1.102
Type
column
Access
readwrite
Status
current
Parent
cmEthernetNetPortEntry
Table
cmEthernetNetPortTable
Siblings
109

Syntax

SfpChannelIdentifier
Source
SfpChannelIdentifier
Base type
Enumeration

Values & Constraints

Type Values
0not-applicable
1none
2frequency-19610
3frequency-19595
4frequency-19585
5frequency-19575
6frequency-19565
7frequency-19555
8frequency-19545
9frequency-19535
10frequency-19525
11frequency-19515
12frequency-19505
13frequency-19495
14frequency-19485
15frequency-19475
16frequency-19465
17frequency-19455
18frequency-19445
19frequency-19435
20frequency-19425
21frequency-19415
22frequency-19405
23frequency-19395
24frequency-19385
25frequency-19375
26frequency-19365
27frequency-19355
28frequency-19345
29frequency-19335
30frequency-19325
31frequency-19315
32frequency-19305
33frequency-19295
34frequency-19285
35frequency-19275
36frequency-19265
37frequency-19255
38frequency-19245
39frequency-19235
40frequency-19225
41frequency-19215
42frequency-19205
43frequency-19600
44frequency-19590
45frequency-19580
46frequency-19570
47frequency-19560
48frequency-19550
49frequency-19540
50frequency-19530
51frequency-19520
52frequency-19510
53frequency-19500
54frequency-19490
55frequency-19480
56frequency-19470
57frequency-19460
58frequency-19450
59frequency-19440
60frequency-19430
61frequency-19420
62frequency-19410
63frequency-19400
64frequency-19390
65frequency-19380
66frequency-19370
67frequency-19360
68frequency-19350
69frequency-19340
70frequency-19330
71frequency-19320
72frequency-19310
73frequency-19300
74frequency-19290
75frequency-19280
76frequency-19270
77frequency-19260
78frequency-19250
79frequency-19240
80frequency-19230
81frequency-19220
82frequency-19210
83frequency-19200
84frequency-19195
85frequency-19190
86frequency-19185
87frequency-19180
88frequency-19175
89frequency-19170
90frequency-19165
91frequency-19160
92frequency-19155
93frequency-19150
94frequency-19145
95frequency-19140
96frequency-19135
97frequency-19130
98frequency-19125

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmEthernetNetPortIndex
An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shel…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.1
cmEthernetNetPortNegotiatedSpeed
This object provides the negotiated speed of the Ethernet Network Port.
columnCM-COMMON-MIBEthernetPortSpeed.1.3.6.1.4.1.2544.1.12.4.1.7.1.10
cmEthernetNetPortRxDeiOuterTagType
This object allows to specify the Receive DEI Outer Tag Type.
columnDeiOuterTagType.1.3.6.1.4.1.2544.1.12.4.1.7.1.100
cmEthernetNetPortTxDeiOuterTagType
This object allows to specify the Transmit DEI Outer Tag Type.
columnDeiOuterTagType.1.3.6.1.4.1.2544.1.12.4.1.7.1.101
cmEthernetNetPortLaserIsTunable
Channel number of WDM tunable XFP setting.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.103
cmEthernetNetPortLaserFrequency
Channel number of WDM tunable XFP setting.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.7.1.104
cmEthernetNetPortMediaTypeAutoSelected
This object provides the auto selected Ethernet Media of the Ethernet Network Port.
columnCM-COMMON-MIBEthernetMediaType.1.3.6.1.4.1.2544.1.12.4.1.7.1.105
cmEthernetNetPortLowLatencyQueuingEnabled
This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.106
cmEthernetNetPortDiagnosticMacAddress
This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.4.1.7.1.107
cmEthernetNetPortIngressCOSPriority deprecated
Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is on…
columnCM-COMMON-MIBVlanTagType.1.3.6.1.4.1.2544.1.12.4.1.7.1.108
cmEthernetNetPortDefaultCOS deprecated
The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.109
cmEthernetNetPortMDIXType
This object allows management of MDIX property on Ethernet Network Port.
columnCmEthernetMDIXType.1.3.6.1.4.1.2544.1.12.4.1.7.1.11
cmEthernetNetPortTrafficModel
The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model.
columnEthernetPortTrafficModel.1.3.6.1.4.1.2544.1.12.4.1.7.1.110
cmEthernetNetPortJumboFramesEnabled
This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU Card.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.12
cmEthernetNetPortSfpVendorName
This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.13
cmEthernetNetPortSfpPartNumber
This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.14
cmEthernetNetPortSfpSerialNumber
This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.15
cmEthernetNetPortSfpDateOfManufacture
This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2544.1.12.4.1.7.1.16
cmEthernetNetPortSfpConnectorValue
This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnCM-COMMON-MIBSfpConnectorValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.17
cmEthernetNetPortInitiateDiag
This object allows to initiate Etherjack diagnosis on the Ethernet Network Port.
columnCmEthernetDiagAction.1.3.6.1.4.1.2544.1.12.4.1.7.1.18
cmEthernetNetPortDiagnosePair1Cond
This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port.
columnCmDiagCableCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.19
cmEthernetNetPortIfIndex
This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2544.1.12.4.1.7.1.2
cmEthernetNetPortDiagnosePair2Cond
This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port.
columnCmDiagCableCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.20
cmEthernetNetPortDiagnosePair3Cond
This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port.
columnCmDiagCableCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.21
cmEthernetNetPortDiagnosePair4Cond
This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port.
columnCmDiagCableCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.22
cmEthernetNetPortDiagnoseAutoNegCond
This object provides auto negotiation results of the diagnosis test on Ethernet Network Port.
columnCmDiagAutoNegCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.23
cmEthernetNetPortDiagnoseLpbkCond
This object provides port loopback results of the diagnosis test on Ethernet Network Port.
columnCmDiagLpbkCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.24
cmEthernetNetPortDiagnoseEfmLpbkCond
This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port.
columnCmDiagEfmOamLpbkCondType.1.3.6.1.4.1.2544.1.12.4.1.7.1.25
cmEthernetNetPortDiagnoseResult
This object provides results of the diagnosis test in string form on Ethernet Network Port.
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.26
cmEthernetNetPortDiagnoseTestStatus
This object provides the current status of the diagnosis test on Ethernet Access Port.
columnCmDiagTestStatus.1.3.6.1.4.1.2544.1.12.4.1.7.1.27
cmEthernetNetPortDiagnoseTestTime
This object provides the time when diagnosis test was last executed.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.2544.1.12.4.1.7.1.28
cmEthernetNetPortLoopbackConfig
This object allows to initiate loopbacks on on the Ethernet Network Port.
columnCmLoopbackType.1.3.6.1.4.1.2544.1.12.4.1.7.1.29
cmEthernetNetPortEntityIndex
Entity Index from ENTITY-MIB for this port.
columnENTITY-MIBPhysicalIndex.1.3.6.1.4.1.2544.1.12.4.1.7.1.3
cmEthernetNetPortLoopbackStatus
This object provides status of the current loopback on the Ethernet Network Port.
columnCmLoopbackType.1.3.6.1.4.1.2544.1.12.4.1.7.1.30
cmEthernetNetPortLoopbackTime
This object allows to specify time for timed-loopbacks on on the Ethernet Network Port.
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.31
cmEthernetNetPortLoopbackSwapSADA
This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped.
columnCmSwapSADAType.1.3.6.1.4.1.2544.1.12.4.1.7.1.32
cmEthernetNetPortOuterVlanLoopbackMask
This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loo…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.33
cmEthernetNetPortOuterVlanLoopback1
This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.34
cmEthernetNetPortOuterVlanLoopback2
This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.35
cmEthernetNetPortOuterVlanLoopback3
This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.36
cmEthernetNetPortInnerVlanLoopbackMask
This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loo…
columnInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.37
cmEthernetNetPortInnerVlanLoopback1
This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.38
cmEthernetNetPortInnerVlanLoopback2
This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.39
cmEthernetNetPortAdminState
This object represents the Administrative State of the Ethernet Network Port.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.4.1.7.1.4
cmEthernetNetPortInnerVlanLoopback3
This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bi…
columnOctetString.1.3.6.1.4.1.2544.1.12.4.1.7.1.40
cmEthernetNetPortLinkLossFwdEnabled
This object allows enabling/disabling link loss forwarding on the Ethernet Network Port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.41
cmEthernetNetPortLinkLossFwdSignalType deprecated
This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid f…
columnCmLinkLossFwdSignalType.1.3.6.1.4.1.2544.1.12.4.1.7.1.42
cmEthernetNetPortLinkLossFwdTriggerTypes
This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled.
columnCmLinkLossFwdTriggerTypes.1.3.6.1.4.1.2544.1.12.4.1.7.1.43
cmEthernetNetPortLinkLossFwdDelay
This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.44
cmEthernetNetPortLinkLossFwdActive
This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.45
cmEthernetNetPortLinkLossFwdPartnerEnabled
This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.46
cmEthernetNetPortLinkLossFwdLocalLinkId
This object allows configuration of the Local Link Id on Ethernet Network port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.47
cmEthernetNetPortLinkLossFwdRemoteLinkIds
This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to distinguish the rem…
columnCmRemoteLinkIds.1.3.6.1.4.1.2544.1.12.4.1.7.1.48
cmEthernetNetPortOamId
OAM Id. This is unique EFM OAM sublayer port id.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.49
cmEthernetNetPortOperationalState
This object represents the Operational State of the Ethernet Network Port.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.4.1.7.1.5
cmEthernetNetPortOamAdminDisposition deprecated
Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release…
columnCmControlProtocolDispType.1.3.6.1.4.1.2544.1.12.4.1.7.1.50
cmEthernetNetPortOamDiscoveryState
Ethernet Network Port's OAM discovery state.
columnCmOamDiscoveryState.1.3.6.1.4.1.2544.1.12.4.1.7.1.51
cmEthernetNetPortOamLocalVarRtrvsEnabled
This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.52
cmEthernetNetPortOamLocalLinkEventsEnabled
This object allows specification of whether the Ethernet Network Port supports interpreting Link Events.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.53
cmEthernetNetPortOamLocalOamLoopbacksSupported
This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.54
cmEthernetNetPortOamLocalUnidirSupportEnabled
This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.55
cmEthernetNetPortOamLocalMaxPDUSize
This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the smaller of the two i…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.56
cmEthernetNetPortOamLocalMode
This object allows to configure the OAM sublayer entity in either Active or Passive mode.
columnCmOamMode.1.3.6.1.4.1.2544.1.12.4.1.7.1.57
cmEthernetNetPortOamRemoteMacAddress
This object allows retrieval of the Remote Mac Address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.4.1.7.1.58
cmEthernetNetPortOamRemoteVarRtrvsEnabled
This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.59
cmEthernetNetPortSecondaryState
This object represents the Secondary State of the Ethernet Network Port.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.4.1.7.1.6
cmEthernetNetPortOamRemoteLinkEventsEnabled
This object allows retrieval of whether the remote OAM entity supports interpreting Link Events.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.60
cmEthernetNetPortOamRemoteOamLoopbacksSupported
This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.61
cmEthernetNetPortOamRemoteUnidirSupportEnabled
This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.62
cmEthernetNetPortOamRemoteMaxPDUSize
This object allows retrieval of the remote OAM entity maximum OAMPDU size.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.63
cmEthernetNetPortOamRemoteMode
This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode.
columnCmOamMode.1.3.6.1.4.1.2544.1.12.4.1.7.1.64
cmEthernetNetPortRxPauseDisposition
This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
columnCmControlProtocolDispType.1.3.6.1.4.1.2544.1.12.4.1.7.1.65
cmEthernetNetPortTxPauseEnabled
This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.66
cmEthernetNetPortAfpType
This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only untagged frames or b…
columnCmAfpType.1.3.6.1.4.1.2544.1.12.4.1.7.1.67
cmEthernetNetPortMDIXStatus
This object provides the current MDIX status of the Ethernet Network port.
columnCmEthernetMDIXType.1.3.6.1.4.1.2544.1.12.4.1.7.1.68
cmEthernetNetPortSfpReach
This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.69
cmEthernetNetPortMTU
This object provides the MTU on the Ethernet Network Port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.7
cmEthernetNetPortSfpLaserWaveLength
This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.4.1.7.1.70
cmEthernetNetPortSfpMediaType
This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp.
columnCM-COMMON-MIBSfpMediaType.1.3.6.1.4.1.2544.1.12.4.1.7.1.71
cmEthernetNetPortOamEnabled
This object allows to manage the EFM OAM on Ethernet Network Port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.72
cmEthernetNetPortOamAdminState
This object provides the EFM OAM Admin State.
columnCmOamAdminState.1.3.6.1.4.1.2544.1.12.4.1.7.1.73
cmEthernetNetPortShapingEnabled
This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.74
cmEthernetNetPortShapedSpeedLo
This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.7.1.75
cmEthernetNetPortShapedSpeedHi
This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.7.1.76
cmEthernetNetPortQinQEtherType
This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.4.1.7.1.77
cmEthernetNetPortLinkLossFwdTxActionType
This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port.
columnCmLinkLossFwdTxActionType.1.3.6.1.4.1.2544.1.12.4.1.7.1.78
cmEthernetNetPortLinkLossFwdRxRLDLinkIds
This object provides the received Remote Link IDs in EFM RLD messages on the Network Port.
columnCmRemoteLinkIds.1.3.6.1.4.1.2544.1.12.4.1.7.1.79
cmEthernetNetPortMediaType
This object represents the type of Ethernet Media on the Ethernet Network Port.
columnCM-COMMON-MIBEthernetMediaType.1.3.6.1.4.1.2544.1.12.4.1.7.1.8
cmEthernetNetPortAutoDiagEnabled
This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.80
cmEthernetNetPortSyncEEnabled
This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.81
cmEthernetNetPortQLModeEnabled
This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when c…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.82
cmEthernetNetPortExpectedQL
This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when c…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.7.1.83
cmEthernetNetPortAssumedQL
This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaning…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.7.1.84
cmEthernetNetPortReceivedQL
This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only ap…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.7.1.85
cmEthernetNetPortTransmitQL
This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is onl…
columnF3-SYNC-MIBSSMQualityLevel.1.3.6.1.4.1.2544.1.12.4.1.7.1.86
cmEthernetNetPortPrioMapMode
This object provides the Priority Mapping Mode used for classification of frames.
columnCM-COMMON-MIBPriorityMapMode.1.3.6.1.4.1.2544.1.12.4.1.7.1.87
cmEthernetNetPortDeiEnable deprecated
This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.88
cmEthernetNetPortPcpDEEncType
This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag.
columnPcpDEEncType.1.3.6.1.4.1.2544.1.12.4.1.7.1.89
cmEthernetNetPortConfigSpeed
This object allows to configure the speed of the Ethernet Network Port.
columnCM-COMMON-MIBEthernetPortSpeed.1.3.6.1.4.1.2544.1.12.4.1.7.1.9
cmEthernetNetPortPcpDEPairsAction
This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPor…
columnPcpDEPairsAction.1.3.6.1.4.1.2544.1.12.4.1.7.1.90
cmEthernetNetPortSSMRemoteMacAddress
This object allows retrieval of the Remote Mac Address, when the port is peering using SSM.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.4.1.7.1.91
cmEthernetNetPortXgePhyType
This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps…
columnXgePhyType.1.3.6.1.4.1.2544.1.12.4.1.7.1.92
cmEthernetNetPortLoopbackSourceMacControlEnabled
This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.93
cmEthernetNetPortLoopbackDestMacControlEnabled
This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.94
cmEthernetNetPortLoopbackSourceMacAddress
This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.4.1.7.1.95
cmEthernetNetPortLoopbackDestMacAddress
This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2544.1.12.4.1.7.1.96
cmEthernetNetPortLoopbackBlockingEnabled
This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direc…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.4.1.7.1.97
cmEthernetNetPortRxDeiAction
This object allows to specify the Receive DEI Action.
columnRxDeiAction.1.3.6.1.4.1.2544.1.12.4.1.7.1.98
cmEthernetNetPortTxDeiAction
This object allows to specify the Transmit DEI Action.
columnTxDeiAction.1.3.6.1.4.1.2544.1.12.4.1.7.1.99