Juniper-UNI-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
31
Rows
31
Columns
283

juniAtmIfTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.2 · 1 row entry · 26 columns
Open in standard view 
This table contains entries for ATM interfaces present in the system.
juniAtmIfEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.2.1
Each entry describes the characteristics of an ATM interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniAtmIfIndex
Column Syntax OID
juniAtmIfIndex
The ifIndex of the ATM interface. When creating entries in this table,
suitable values for this object are determined by reading
juniAtmNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1
juniAtmIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2
juniAtmIfLowerIfIndex
The ifIndex of an interface over which this ATM interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3
juniAtmIfIlmiVpi
The VPI of the ILMI of a major ATM interface.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4
juniAtmIfIlmiVci
The VCI of the ILMI of a major ATM interface.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5
juniAtmIfIlmiVcd
An integer identifier for the ILMI, used in conjunction with the
command-line interface.

The value must be unique among VCs configured on the same ATM
interface.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6
juniAtmIfIlmiPollFrequency
The amount of time in seconds between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of ILMI
connectivity. The distinguished value zero disables ILMI connectivity
procedur…
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7
juniAtmIfIlmiAdminState
The administrative status of ILMI in the ATM interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8
juniAtmIfUniVersion
Use to specify the User Network Interface (UNI) the router should use
when ILMI link auto determination is unsuccesful or ILMI is disabled.
Enumerationr/w
Enumerated Values:
0uniVersionAutoConfig
1version3Dot0
2version3Dot1
3version4Dot0
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9
juniAtmIfOamCellRxAdminState
Use to specify the OAM Cell Receive Administrative state on this
interface.
Enumerationr/w
Enumerated Values:
0oamCellAdminStateDisabled
1oamCellAdminStateEnabled
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10
juniAtmIfInCells
The total number of cells received on this major interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11
juniAtmIfOutCells
The total number of cells transmitted on this major interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12
juniAtmIfVcCount
The total number of circuits configured on this interface.
Integer32
Constraints:
range: 0-268431360
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13
juniAtmIfMapGroup
The NBMA map group this interface is associated with.
JuniAtmNbmaMapNameOrNullr/w
Textual Convention: JuniAtmNbmaMapNameOrNull OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14
juniAtmIfCacAdminState
The administrative staus of CAC on this ATM major interface.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15
juniAtmIfCacUbrWeight
The bandwidth associated with every UBR and UBR with PCR connection
configured on the ATM major interface. This value is used for CAC
computation. The units are kilo-bits per second (kbps).
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16
juniAtmIfCacSubscriptionBandwidth
The subscribed bandwidth of the ATM major interface. If this value is
not specified or set to 0, the effective port bandwidth is used. When a
Get operation is performed the current effective bandwidth is returned.
The…
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17
juniAtmIfCacAvailableBandwidth
The available bandwidth in Tx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per second (kbps).
kbpsInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18
juniAtmIfCacAvailableBandwidthRx deprecated
The available bandwidth in Rx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per second (kbps).
kbpsInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19
juniAtmIfE164Autoconversion obsolete
The status of E164 autoconversion feature in the ATM interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20
juniAtmIfE164Gateway obsolete
The status of E164 gateway feature in the ATM interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21
juniAtmIfE164OneToOneAddrTrans obsolete
The status of E164 one-to-one address translation feature in the ATM
interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22
juniAtmIfOamCellFilter
The type of OAM cells to discard when juniAtmIfOamCellRxAdminState is
set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards
received OAM AIS and RDI cells. The value oamCellFilterAll discards all
rec…
Enumerationr/w
Enumerated Values:
0oamCellFilterAll
1oamCellFilterAlarm
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23
juniAtmIfCacUsedBandwidthUpper
The most significant 32 bits of the CAC used bandwidth on the ATM major
interface. The least significant 32 bits of the CAC used bandwidth are
specified by juniAtmIfCacUsedBandwidthLower.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24
juniAtmIfCacUsedBandwidthLower
The least significant 32 bits of the CAC used bandwidth on the ATM
major interface. The most significant 32 bits of the CAC used bandwidth
are specified by juniAtmIfCacUsedBandwidthUpper.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25
juniAtmIfAssociatedVcClassId
The integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0 means no…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26

juniAtmPvcStatisticsTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.3 · 1 row entry · 18 columns
Open in standard view 
This table contains statistics for PVC entries.
juniAtmPvcStatisticsEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.3.1
Each entry provides statistics on an ATM PVC.
Indexes
juniAtmPvcStatsIfIndex juniAtmPvcStatsVpi juniAtmPvcStatsVci
Column Syntax OID
juniAtmPvcStatsIfIndex
The ifIndex of the ATM interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1
juniAtmPvcStatsVpi
The VPI of the ATM VCC used by this ATM interface and PVC.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2
juniAtmPvcStatsVci
The VCI of the ATM VCC used by this ATM interface and PVC.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3
juniAtmPvcStatsInCells
Received cells.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4
juniAtmPvcStatsInCellOctets
Received cells octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5
juniAtmPvcStatsInPackets
Received AAL PDUs.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6
juniAtmPvcStatsInPacketOctets
Received AAL PDU octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7
juniAtmPvcStatsOutCells
Transmitted cells.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8
juniAtmPvcStatsOutCellOctets
Transmitted cell octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9
juniAtmPvcStatsOutPackets
Transmitted AAL PDUs.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10
juniAtmPvcStatsOutPacketOctets
Transmitted AAL PDU octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11
juniAtmPvcStatsInCellErrors
Received cells dropped due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12
juniAtmPvcStatsinPacketErrors
Received packets dropped due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13
juniAtmPvcStatsOutCellErrors
Cells not transmitted due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14
juniAtmPvcStatsOutPacketErrors
Packets not transmitted due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15
juniAtmPvcStatsInPacketDiscards
Received packets w/o errors discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16
juniAtmPvcStatsInPacketOctetDiscards
Received bytes w/o errors discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17
juniAtmPvcStatsInPacketUnknownProtocol
Received packets that are discarded because the interface can not
discern or is not configured to support this protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18

juniAtmVpTunnelTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.4 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for ATM VP Tunnels present in the system.
juniAtmVpTunnelEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.4.1
Each entry describes the characteristics of an ATM VP Tunnel.
Indexes
juniAtmVpTunnelIfIndex juniAtmVpTunnelVpi
Column Syntax OID
juniAtmVpTunnelIfIndex
The ifIndex of the ATM interface. The value of this object is the same
as the juniAtmIfIndex object in the juniAtmIfTable.

Entries in this table cannot be created unless the underlying ATM
interface entr…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1
juniAtmVpTunnelVpi
The VPI value for this VP tunnel entry.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2
juniAtmVpTunnelKbps
The tunnel rate in kilobits per second (kbps) for this entry.
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3
juniAtmVpTunnelRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4
juniAtmVpTunnelServiceCategory
The ATM service category for the tunnel.
Enumerationr/w
Enumerated Values:
1nrtVbr
2cbr
 .1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5

juniAtmIfCapabilityTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.5 · 1 row entry · 9 columns
Open in standard view 
This table contains entries for ATM interfaces present in the system.
juniAtmIfCapabilityEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.5.1
Each entry describes the capabilities of an ATM interface. A
management client can use this table to determine differences in the
configurable level of support across entries in this table.
Indexes
juniAtmIfCapabilityIndex
Column Syntax OID
juniAtmIfCapabilityIndex
The ifIndex of the ATM interface. The value of this object is the same
as juniAtmIfIndex in the juniAtmIfTable.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1
juniAtmIfCapabilityTrafficShaping
Indicates whether traffic shaping is supported on this interface;
true(1) indicates that it is, false(2) indicates that it is not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2
juniAtmIfCapabilityOam
Indicates whether OAM is supported on this interface; true(1) indicates
that it is, false(2) indicates that it is not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3
juniAtmIfCapabilityDefaultVcPerVp
The default number of VCs per VP for this interface.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4
juniAtmIfCapabilityNumVpiVciBits
The total range of bits used for constructing VPI/VCI identifiers for
this interface.
Integer32
Constraints:
range: 8-28
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5
juniAtmIfCapabilityMaxVcd
The maximum configurable value for a VCD on this interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6
juniAtmIfCapabilityMaxVpi
The maximum configurable value for a VPI on this interface.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7
juniAtmIfCapabilityMaxVci
The maximum configurable value for a VCI on this interface.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8
juniAtmIfCapabilityOamCellFilter
Indicates whether OAM cell filter is supported on this interface;
true(1) indicates that it is, false(2) indicates that it is not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9

juniAtmIfSvcSignallingTable

table deprecated
.1.3.6.1.4.1.4874.2.2.8.1.1.6 · 1 row entry · 4 columns
Open in standard view 
This table contains entries for extending the juniAtmIfTable for
configuring signalling information for switched virtual connection
(SVC).
juniAtmIfSvcSignallingEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.6.1
Each entry provides configuration parameters for ATM signalling on the
interface.
Indexes
juniAtmIfIndex
Column Syntax OID
juniAtmIfSvcSignallingVpi deprecated
The VPI identifier of the ATM circuit used for signalling for this
interface.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1
juniAtmIfSvcSignallingVci deprecated
The VCI identifier of the ATM circuit used for signalling for this
interface.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2
juniAtmIfSvcSignallingVcd deprecated
An integer identifier for the ATM circuit used for signalling on this
interface.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3
juniAtmIfSvcSignallingAdminStatus deprecated
The administrative status of signalling on the ATM interface.
ATM-TC-MIBAtmVorXAdminStatusr/w
Textual Convention: ATM-TC-MIBAtmVorXAdminStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4

juniAtmIfPnniRccTable

table obsolete
.1.3.6.1.4.1.4874.2.2.8.1.1.7 · 1 row entry · 4 columns
Open in standard view 
This table contains entries for extending the juniAtmIfTable for
configuring PNNI RCC information.
juniAtmIfPnniRccEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.7.1
Each entry provides configuration parameters for PNNI RCC on the
interface.
Indexes
juniAtmIfIndex
Column Syntax OID
juniAtmIfPnniRccVpi obsolete
The VPI identifier of the ATM circuit used for PNNI RCC on this
interface.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.1
juniAtmIfPnniRccVci obsolete
The VCI identifier of the ATM circuit used for PNNI RCC on this
interface.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.2
juniAtmIfPnniRccVcd obsolete
An integer identifier for the ATM circuit used for PNNI RCC on this
interface.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.3
juniAtmIfPnniRccAdminStatus obsolete
The administrative status of PNNI on the ATM interface.
ATM-TC-MIBAtmVorXAdminStatusr/w
Textual Convention: ATM-TC-MIBAtmVorXAdminStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.4874.2.2.8.1.1.7.1.4

juniAtmOamF4FlowEndToEndCfgTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.8 · 1 row entry · 6 columns
Open in standard view 
This table contains entries for F4 OAM end-to-end flows configured.
juniAtmOamF4FlowEndToEndCfgEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.8.1
Each entry provides configuration parameters for one F4 OAM end-to-end
flow configured for each VPI.
Indexes
juniAtmOamF4FlowEndToEndIfIndex juniAtmOamF4FlowEndToEndVpi
Column Syntax OID
juniAtmOamF4FlowEndToEndIfIndex
The ifIndex of the ATM interface to configure the F4 OAM end-to-end
flow.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1
juniAtmOamF4FlowEndToEndVpi
Select the VPI for F4 OAM end-to-end flow configuration.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2
juniAtmOamF4FlowEndToEndLoopbackTimer
Configure the timer for sending the F4 flow end-to-end loopback OAM
cells. Setting this value will enable sending the F4 end cells on the
circuit. It is not allowed to set the value to -1 and whenever it is
read as -1 …
secondsInteger32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3
juniAtmOamF4FlowEndToEndCCSink
Enable/Disable F4 flow end-to-end continuity check sink end point for
this VP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4
juniAtmOamF4FlowEndToEndCCSource
Enable/Disable F4 flow end-to-end continuity check source end point for
this VP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5
juniAtmOamF4FlowEndToEndRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create/delete an entry i…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6

juniAtmOamF4FlowSegmentCfgTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.9 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for F4 OAM Segment flows configured.
juniAtmOamF4FlowSegmentCfgEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.9.1
Each entry provides configuration parameters for one F4 OAM Segment
flow configured for each VPI.
Indexes
juniAtmOamF4FlowSegmentIfIndex juniAtmOamF4FlowSegmentVpi
Column Syntax OID
juniAtmOamF4FlowSegmentIfIndex
The ifIndex of the ATM interface to configure the F4 OAM segment flow.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.1
juniAtmOamF4FlowSegmentVpi
Select the VPI for F4 OAM segment flow configuration.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.2
juniAtmOamF4FlowSegmentCCSink
Enable/Disable F4 flow segment continuity check sink end point for
this VP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.3
juniAtmOamF4FlowSegmentCCSource
Enable/Disable F4 flow segment continuity check source end point for
this VP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.4
juniAtmOamF4FlowSegmentRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create/delete an entry i…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.1.9.1.5

juniAtmVpDescrTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.10 · 1 row entry · 1 columns
Open in standard view 
This table contains entries for ATM VP Description present in the
system.  The user can configure a description of up to 32 characters for
every VP in the ATM interface.  A row exists for every VP on the ATM
interface.  These rows get created as soon as the ATM major interface
created.
juniAtmVpDescrEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.10.1
Each entry contains the description of the VP.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi
Column Syntax OID
juniAtmVpDescription
The description for this VP. The default value of this object is null
string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4874.2.2.8.1.1.10.1.1

juniAtmF4FlowOamEndToEndStatsTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.11 · 1 row entry · 20 columns
Open in standard view 
This table contains entries for F4 flow EndToEnd OAM circuits stats.
juniAtmF4FlowOamEndToEndStatsEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.11.1
Each entry provides stats for one F4 OAM circuit for each VPI.
Indexes
juniAtmOamF4FlowEndToEndIfIndex juniAtmOamF4FlowEndToEndVpi
Column Syntax OID
juniAtmF4FlowInOamEndAisCells
Received end-to-end OAM F4 AIS cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.1
juniAtmF4FlowInOamEndRdiCells
Received end-to-end OAM F4 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.2
juniAtmF4FlowInOamEndCCCells
Received end-to-end OAM F4 CC cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.3
juniAtmF4FlowInOamEndCCActDeActCells
Received end-to-end OAM F4 activation/de-activation cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.4
juniAtmF4FlowInOamEndLoopbackCells
Total received OAM F4 end-to-end loopback cells. Aggregate of
juniAtmF4FlowEndToEndInLoopbackCmds and
juniAtmF4FlowEndToEndInLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.5
juniAtmF4FlowOutEndRdiCells
Transmitted end-to-end OAM F4 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.6
juniAtmF4FlowOutEndCCCells
Transmitted end-to-end OAM F4 CC cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.7
juniAtmF4FlowOutEndCCActDeActCells
Transmitted end-to-end OAM F4 activation/de-activation cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.8
juniAtmF4FlowOutEndToEndLoopbackCells
Total transmitted OAM F4 end-to-end loopback cells. Aggregate of
juniAtmF4FlowEndToEndOutLoopbackCmds and
juniAtmF4FlowEndToEndOutLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.9
juniAtmF4FlowEndActualLoopbackFreq
Actual end-to-end loopback Frequecy calculated for OAM cells
transmission.
secondsInteger32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.10
juniAtmF4FlowEndLastTimeChanged
Last time end-to-end F4 OAM flow got changed.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.11
juniAtmF4FlowOamEndVpOperationState
Represents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
repor…
Enumeration
Enumerated Values:
0vcAisState
1vcRdiState
2vcDownRetry
3vcUpRetry
4vcUp
5vcDown
6vcNotManaged
7vpAisState
8vpRdiState
9vcInVpRdiState
10vcInVpAisState
11vcSegmentAisState
12vcSegRdiState
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12
juniAtmF4FlowOamEndVpAdminState
End-to-end VP admin state.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.13
juniAtmF4FlowEndInOamCells
Received end-to-end OAM F4 loopback cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.14
juniAtmF4FlowEndOutOamCells
Transmitted end-to-end OAM F4 loopback cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.15
juniAtmF4FlowEndInOamCellsDropped
Received end-to-end OAM cells that were dropped.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.16
juniAtmF4FlowEndToEndInLoopbackCmds
Received OAM F4 end-to-end loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.17
juniAtmF4FlowEndToEndInLoopbackRsps
Received OAM F4 end-to-end loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.18
juniAtmF4FlowEndToEndOutLoopbackCmds
Transmitted OAM F4 end-to-end loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.19
juniAtmF4FlowEndToEndOutLoopbackRsps
Transmitted OAM F4 end-to-end loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.11.1.20

juniAtmF4FlowOamSegmentStatsTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.12 · 1 row entry · 19 columns
Open in standard view 
This table contains entries for F4 flow Segment OAM circuits stats.
juniAtmF4FlowOamSegmentStatsEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.12.1
Each entry provides stats for one F4 OAM circuit for each VPI.
Indexes
juniAtmOamF4FlowSegmentIfIndex juniAtmOamF4FlowSegmentVpi
Column Syntax OID
juniAtmF4FlowInOamSegmentAisCells
Received end-to-end OAM F4 AIS cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.1
juniAtmF4FlowInOamSegmentRdiCells
Received end-to-end OAM F4 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.2
juniAtmF4FlowInOamSegmentCCCells
Received end-to-end OAM F4 CC cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.3
juniAtmF4FlowInOamSegmentCCActDeActCells
Received end-to-end OAM F4 activation/de-activation cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.4
juniAtmF4FlowInOamSegmentLoopbackCells
Total received OAM F4 segment loopback cells. Aggregate of
juniAtmF4FlowSegmentInLoopbackCmds and
juniAtmF4FlowSegmentInLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.5
juniAtmF4FlowOutSegmentRdiCells
Transmitted end-to-end OAM F4 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.6
juniAtmF4FlowOutSegmentCCCells
Transmitted end-to-end OAM F4 CC cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.7
juniAtmF4FlowOutSegmentCCActDeActCells
Transmitted end-to-end OAM F4 activation/de-activation cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.8
juniAtmF4FlowOutSegmentLoopbackCells
Total transmitted OAM F4 segment loopback cells. Aggregate of
juniAtmF4FlowSegmentOutLoopbackCmds and
juniAtmF4FlowSegmentOutLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.9
juniAtmF4FlowSegmentLastTimeChanged
Last time end-to-end F4 OAM flow got changed.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.10
juniAtmF4FlowOamSegmentVpOperationState
Represents the F4 end-to-end OAM flow VP operation states. It can take
one of the following operational state values:
vcAisState - AIS cell received or underlying physical layer
repor…
Enumeration
Enumerated Values:
0vcAisState
1vcRdiState
2vcDownRetry
3vcUpRetry
4vcUp
5vcDown
6vcNotManaged
7vpAisState
8vpRdiState
9vcInVpRdiState
10vcInVpAisState
11vcSegmentAisState
12vcSegRdiState
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11
juniAtmF4FlowOamSegmentVpAdminState
Segment VP admin state.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.12
juniAtmF4FlowSegmentInOamCells
Received end-to-end OAM F4 loopback cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.13
juniAtmF4FlowSegmentOutOamCells
Transmitted end-to-end OAM F4 loopback cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.14
juniAtmF4FlowSegmentInOamCellsDropped
Received end-to-end OAM cells that were dropped.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.15
juniAtmF4FlowSegmentInLoopbackCmds
Received OAM F4 segment loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.16
juniAtmF4FlowSegmentInLoopbackRsps
Received OAM F4 segment loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.17
juniAtmF4FlowSegmentOutLoopbackCmds
Transmitted OAM F4 segment loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.18
juniAtmF4FlowSegmentOutLoopbackRsps
Transmitted OAM F4 segment loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.12.1.19

juniAtmMartiniTimeoutTimerTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.13 · 1 row entry · 2 columns
Open in standard view 
This table contains entries for ATM Martini cell aggregation timeout
detection.  The user can configure timeout values for three timers.
A row exists for every separate timer supported.  These rows get 
created as soon as the ERX system comes up.
juniAtmMartiniTimeoutTimerEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.13.1
Each entry contains the timeout value of ATM Martini
cell aggregation timer.
Indexes
juniAtmMartiniTimeoutTimerIndex
Column Syntax OID
juniAtmMartiniTimeoutTimerIndex
The ATM Martini cell aggregation timeout timer identifier.
Enumeration
Enumerated Values:
1timer1
2timer2
3timer3
 .1.3.6.1.4.1.4874.2.2.8.1.1.13.1.1
juniAtmMartiniTimeoutTimerValue
The ATM Martini cell aggregation timeout timer value in microseconds.
Integer32r/w
Constraints:
range: 100-4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.13.1.2

juniAtmVpStatsTable

table
.1.3.6.1.4.1.4874.2.2.8.1.1.14 · 1 row entry · 16 columns
Open in standard view 
This table contains entries for ATM VP statistics present in the
system. A row exists for every VP on the ATM
interface. These rows get created as soon as the ATM major interface
created.
juniAtmVpStatsEntry entry .1.3.6.1.4.1.4874.2.2.8.1.1.14.1
Each entry contain the VP statistics.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi
Column Syntax OID
juniAtmVpStatsIfIndex
The ifIndex of the ATM interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.1
juniAtmVpStatsVpi
The VPI value of the virtual path for which statistics are retrieved.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.2
juniAtmVpStatsInCells
Received cells.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.3
juniAtmVpStatsInPackets
Received AAL5 PDUs.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.4
juniAtmVpStatsInPacketOctets
Received AAL5 PDU octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.5
juniAtmVpStatsOutCells
Transmitted cells.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.6
juniAtmVpStatsOutPackets
Transmitted AAL5 PDUs
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.7
juniAtmVpStatsOutPacketOctets
Transmitted AAL5 PDU octets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.8
juniAtmVpStatsInPacketErrors
Received packets dropped due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.9
juniAtmVpStatsOutPacketErrors
Packets not transmitted due to errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.10
juniAtmVpStatsInPacketDiscards
Received packets without errors discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.11
juniAtmVpStatsInPacketOctetDiscards
Received bytes without errors discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.12
juniAtmVpStatsInPacketUnknownProtocol
Received packets that are discarded because the interface can not
discern or is not configured to support this protocol.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.13
juniAtmVpStatsCrcErrors
Received packets that are discarded because of check sum erros
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.14
juniAtmVpStatsSarTimeouts
Received packets that are discarded because of SAR timeout
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.15
juniAtmVpStatsOverSizedPackets
Over sized packets that are received on this VP.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.1.14.1.16

juniAtmAal5IfTable

table
.1.3.6.1.4.1.4874.2.2.8.1.2.2 · 1 row entry · 3 columns
Open in standard view 
This table contains entries for ATM AAL5 interfaces present in the
system.
juniAtmAal5IfEntry entry .1.3.6.1.4.1.4874.2.2.8.1.2.2.1
Each entry describes the characteristics of an ATM AAL5 interface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniAtmAal5IfIndex
Column Syntax OID
juniAtmAal5IfIndex
The ifIndex of the ATM AAL5 interface. When creating entries in this
table, suitable values for this object are determined by reading
juniAtmAal5NextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1
juniAtmAal5IfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2
juniAtmAal5IfLowerIfIndex
The ifIndex of an ATM interface over which this ATM AAL5 interface is
to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3

juniAtmBulkCircuitsNameTable

table
.1.3.6.1.4.1.4874.2.2.8.1.2.3 · 1 row entry · 4 columns
Open in standard view 
The entries in this table provide mappings of ATM bulk virtual circuit
range names to local integer identifiers for those profiles.  These
integers are used as indexes into other MIB tables containing profile
configuration parameters associated with the same profile name.
juniAtmBulkCircuitsNameEntry entry .1.3.6.1.4.1.4874.2.2.8.1.2.3.1
A mapping of a ATM bulk virtual circuit range name to an integer
identifier for that name.
Indexes
juniAtmBulkCircuitsNameAal5IfIndex juniAtmBulkCircuitsNameName
Column Syntax OID
juniAtmBulkCircuitsNameAal5IfIndex
The ifIndex of the ATM AAL5 interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.1
juniAtmBulkCircuitsNameName
The ATM bulk virtual circuit range name uniquely identifying this
entry.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.2
juniAtmBulkCircuitsNameRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.

Creating an entry in this table creates corresponding entry in
juniAtmBulkCircuitsIdTable. Del…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.3
juniAtmBulkCircuitsNameId
The integer identifier associated with this ATM bulk virtual circuit
range name.

This value of this identifier is assigned by the device when an entry in
this table is created.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.3.1.4

juniAtmBulkCircuitsIdTable

table
.1.3.6.1.4.1.4874.2.2.8.1.2.4 · 1 row entry · 4 columns
Open in standard view 
Provides inverse mapping of ATM bulk virtual circuit IDs to ATM bulk
virtual circuit names.
juniAtmBulkCircuitsIdEntry entry .1.3.6.1.4.1.4874.2.2.8.1.2.4.1
A mapping of an integer identifier to a ATM bulk virtual circuit name.
Indexes
juniAtmBulkCircuitsIdAal5IfIndex juniAtmBulkCircuitsIdId
Column Syntax OID
juniAtmBulkCircuitsIdAal5IfIndex
The ifIndex of the ATM AAL5 interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.1
juniAtmBulkCircuitsIdId
The integer identifier associated with this ATM bulk virtual circuit
name.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.2
juniAtmBulkCircuitsIdName
The ATM bulk virtual circuit name having the associated identifier.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.3
juniAtmBulkCircuitsIdNextInstance
The next available instance value for juniAtmBulkCircuitsEntry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.4.1.4

juniAtmBulkCircuitsTable

table
.1.3.6.1.4.1.4874.2.2.8.1.2.5 · 1 row entry · 9 columns
Open in standard view 
This table contains bulk virtual circuit range parameters.
juniAtmBulkCircuitsEntry entry .1.3.6.1.4.1.4874.2.2.8.1.2.5.1
Each entry describes the characteristics of VC range.
Indexes
juniAtmBulkCircuitsAal5IfIndex juniAtmBulkCircuitsId juniAtmBulkCircuitsInstance
Column Syntax OID
juniAtmBulkCircuitsAal5IfIndex
The ifIndex of the ATM AAL5 interface on which this bulk virtual
circuit sub-range is created.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.1
juniAtmBulkCircuitsId
The integer identifier associated with this ATM bulk virtual circuit
name.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.2
juniAtmBulkCircuitsInstance
The unique identifier of the ATM bulk virtual circuit sub-range.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.3
juniAtmBulkCircuitsRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.

Since none of the VPI/VCI minimum and maximum values have default
values, all these values mus…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.4
juniAtmBulkCircuitsMinVpi
The minimum value of VPI for this circuit sub-range. This value must
be less than or equal to the value of juniAtmBulkCircuitsMaxVpi.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.5
juniAtmBulkCircuitsMaxVpi
The maximum value of VPI for this cicuit sub-range. This value must
be equal to or greater than the value of juniAtmBulkCircuitsMinVpi.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.6
juniAtmBulkCircuitsMinVci
The minimum value of VCI for this circuit sub-range. This value must
be less than or equal to the value of juniAtmBulkCircuitsMaxVci.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.7
juniAtmBulkCircuitsMaxVci
The maximum value of VCI for this circuit sub-range. This value must
be equal to or greater than the value of juniAtmBulkCircuitsMinVci.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.8
juniAtmBulkCircuitsAdminState
The administrative status of this circuit sub-range.
Juniper-TCJuniEnabler/w
Textual Convention: Juniper-TCJuniEnable Enumeration
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.8.1.2.5.1.9

juniAtmProfileOverrideAssignIfCircuitTable

table
.1.3.6.1.4.1.4874.2.2.8.1.2.6 · 1 row entry · 7 columns
Open in standard view 
Table providing overriding profile assignment to a circuit configured 
as part of bulk-configuration. Circuit is identified by interface index 
and vpi, vci.
          
The entries in this table specify which profile to use when creating and
configuring a dynamic interface above a circuit specified by vpi and 
vci.
          
This entry is effective when the circuit specified by 
juniAtmProfileOverrideAssignIfCircuitAal5Index, 
juniAtmProfileOverrideAssignIfCircuitRangeId,             
juniAtmProfileOverrideAssignIfCircuitVpi, 
juniAtmProfileOverrideAssignIfCircuitVci 
		is part of bulk-configuration.
juniAtmProfileOverrideAssignIfCircuitEntry entry .1.3.6.1.4.1.4874.2.2.8.1.2.6.1
An assignment of a profile to a circuit configured as part of
bulk-configuration on an AAL5 interface.
Indexes
juniAtmProfileOverrideAssignIfCircuitAal5Index juniAtmProfileOverrideAssignIfCircuitRangeId juniAtmProfileOverrideAssignIfCircuitVpi juniAtmProfileOverrideAssignIfCircuitVci
Column Syntax OID
juniAtmProfileOverrideAssignIfCircuitAal5Index
The ifIndex of the AAL5 interface to which the profile is assigned.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.1
juniAtmProfileOverrideAssignIfCircuitRangeId
The integer identifier associated with the ATM bulk circuit
configuration.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.2
juniAtmProfileOverrideAssignIfCircuitVpi
The VPI value of the circuit to which the profile is assigned.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.3
juniAtmProfileOverrideAssignIfCircuitVci
The VCI value of the circuit to which the profile is assigned.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.4
juniAtmProfileOverrideAssignIfCircuitRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' and 'destroy' may be SET.

Since the VPI, VCI and profileId values do not have any default
values, all these values must …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.5
juniAtmProfileOverrideAssignIfCircuitProfileId
The ID of the profile assigned to the circuit configured as part of
bulk-configuration. Circuit is identified by interface index and vpi,
vci.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.6
juniAtmProfileOverrideAssignIfCircuitOperStatus
The operational status of the profile override assignment identified
by this entry.

It returns inactive(0), if a static ATM circuit with identical VPI/VCI
values is present on the same ATM interface. In …
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7

juniAtmSubIfTable

table
.1.3.6.1.4.1.4874.2.2.8.1.3.2 · 1 row entry · 11 columns
Open in standard view 
This table contains entries for ATM Subinterfaces present in the
system.
juniAtmSubIfEntry entry .1.3.6.1.4.1.4874.2.2.8.1.3.2.1
Each entry describes the characteristics of an ATM Subinterface.
Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
juniAtmSubIfIndex
Column Syntax OID
juniAtmSubIfIndex
The ifIndex of the ATM Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniAtmSubNextIfIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1
juniAtmSubIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2
juniAtmSubIfDistinguisher
An integer identifier for the subinterface, used in conjunction with
the command-line interface. It is provided here for cross-reference
purposes only.

The value must be unique among subinterfaces config…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3
juniAtmSubIfLowerIfIndex
The ifIndex of an ATM AAL5 interface over which this ATM subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a nonzero value be configured
at entry creati…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4
juniAtmSubIfNbma
The NBMA administrative setting. Setting this value of this object to
true(1) will enable multipoint access on this interface. Setting the
value to false(2), will enable point to point access on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5
juniAtmSubIfAddress deprecated
Specifies the local ATM NSAP address of the circuit. A GET operation
returns a full 20-octet NSAP. A SET operation only requires 7 octets,
since the prefix can be implied.
OctetStringr/w
Constraints:
range: 0-0
range: 7-7
range: 20-20
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6
juniAtmSubIfMtu
The size of the largest packet which can be sent/received on the
interface, specified in octets.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.7
juniAtmSubIfAdvisoryRxSpeed
Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit receive speed.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.8
juniAtmSubIfMartiniMaxCellsPerPacket
The number of cells that can be aggregated in a single ATM Martini
packet in cell-relay mode.
Integer32r/w
Constraints:
range: 1-190
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.9
juniAtmSubIfMartiniTimeoutTimerId
The timer identifier used to abandon cell aggregation when no
cells are supplied for transmission in ATM Martini cell-relay mode.
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.10
juniAtmSubIfAssociatedVcClassId
The integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the juniAtmVcClassNameTable. A value of 0
m…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.11

juniAtmSubIfVccTable

table
.1.3.6.1.4.1.4874.2.2.8.1.3.3 · 1 row entry · 12 columns
Open in standard view 
This table contains entries for ATM VCCs configured on ATM
subinterfaces present in the system.
          
An implementation may constrain the number of VCCs permitted to be
configured per ATM Subinterface; in particular, an implementation may
restrict each ATM Subinterface to have a single VCC.
          
Attributes in this entry can only be configured at entry creation, and
remain fixed for the lifetime of the entry.
juniAtmSubIfVccEntry entry .1.3.6.1.4.1.4874.2.2.8.1.3.3.1
Each entry describes the characteristics of an ATM subinterface VCC.
Indexes
juniAtmSubIfIndex juniAtmSubIfVccVpi juniAtmSubIfVccVci
Column Syntax OID
juniAtmSubIfVccVpi
The VPI of the ATM VCC used by this subinterface.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1
juniAtmSubIfVccVci
The VCI of the ATM VCC used by this subinterface.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2
juniAtmSubIfVccRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3
juniAtmSubIfVccVcd
An integer identifier for the circuit, used in conjunction with the
command-line interface. It is provided here for cross-reference
purposes only.

The value must be unique among VCCs configured on the sa…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4
juniAtmSubIfVccType
Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VcMux and LLC
formats. …
Enumerationr/w
Enumerated Values:
0rfc1483VcMux
1rfc1483Llc
2autoconfig
3aal5
4aal0
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5
juniAtmSubIfVccServiceCategory
Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
r…
Enumerationr/w
Enumerated Values:
0ubr
1ubrPcr
2nrtVbr
3cbr
4rtVbr
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6
juniAtmSubIfVccPcr
Peak Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtVbr…
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7
juniAtmSubIfVccScr
Sustained Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbr
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8
juniAtmSubIfVccMbs
Maximum Burst Size, in cells, of this circuit.

This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nrtVbr
rtVbr
cellsInteger32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9
juniAtmSubIfInverseArp
Enables the inverse ARP protocol on this VCC; true(1) enables the
protocol, false(2) disables it.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10
juniAtmSubIfInverseArpRefresh
The refresh rate in minutes between inverse ARP protocol messages.
minutesInteger32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11
juniAtmSubIfVccAssociatedVcClassId
The integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the juniAtmVcClassNameTable. A value
of 0 m…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12

juniAtmCircuitOamTable

table
.1.3.6.1.4.1.4874.2.2.8.1.3.4 · 1 row entry · 30 columns
Open in standard view 
This table contains circuit OAM data for a PVC.
juniAtmCircuitOamEntry entry .1.3.6.1.4.1.4874.2.2.8.1.3.4.1
Each entry provides OAM data on an ATM PVC.
Indexes
juniAtmCircuitOamIfIndex juniAtmCircuitOamVpi juniAtmCircuitOamVci
Column Syntax OID
juniAtmCircuitOamIfIndex
The ifIndex of the ATM subinterface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1
juniAtmCircuitOamVpi
The VPI of the ATM VCC used by this ATM interface and PVC.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2
juniAtmCircuitOamVci
The VCI of the ATM VCC used by this ATM interface and PVC.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3
juniAtmCircuitOamAdminStatus
The administrative state of OAM for the interface identified by this
entry.
Enumerationr/w
Enumerated Values:
1oamAdminStateDisabled
2oamAdminStateEnabled
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4
juniAtmCircuitOamLoopbackOperStatus
The operational status of OAM for the interface identified by this
entry.
oamOperStatusNotSupported(0) - OAM not supported on this interface
oamOperStatusDisabled(1) - VC integrity disabled
oamOperStatus…
Enumeration
Enumerated Values:
0oamOperStatusNotSupported
1oamOperStatusDisabled
2oamOperStatusSent
3oamOperStatusReceived
4oamOperStatusFailed
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5
juniAtmCircuitVcOamOperStatus
The OAM VC operational status of this entry.
oamVcOperStateAisState(0) - AIS cell received or underlying
physical layer reporting transmission
path AIS
oamVcOpe…
Enumeration
Enumerated Values:
0oamVcOperStateAisState
1oamVcOperStateRdiState
2oamVcOperStateDownRetry
3oamVcOperStateUpRetry
4oamVcOperStateUp
5oamVcOperStateDown
6oamVcOperStateNotManaged
7oamVcOperStateVpAis
8oamVcOperStateVpRdi
9oamVcOperStateVcInVpRdi
10oamVcoperStateVcInVpAis
11oamVcOperStateSegAis
12oamVcOperStateSegRdi
13oamVcOperStateGenAis
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6
juniAtmCircuitOamLoopbackFrequency
The OAM loopback frequency in seconds.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7
juniAtmCircuitInOamF5Cells
Received OAM F5 cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8
juniAtmCircuitInOamCellsDropped
Received OAM cells that were dropped.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9
juniAtmCircuitOutOamF5Cells
Transmitted OAM F5 cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10
juniAtmCircuitInOamF5EndToEndLoopbackCells
Total received OAM F5 end-to-end loopback cells. Aggregate of
juniAtmCircuitInOamF5EndToEndLoopbackCmds and
juniAtmCircuitInOamF5EndToEndLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11
juniAtmCircuitInOamF5SegmentLoopbackCells
Total received OAM F5 segment loopback cells. Aggregate of
juniAtmCircuitInOamF5SegmentLoopbackCmds and
juniAtmCircuitInOamF5SegmentLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12
juniAtmCircuitInOamF5AisCells
Received OAM F5 AIS cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13
juniAtmCircuitInOamF5RdiCells
Received OAM F5 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14
juniAtmCircuitOutOamF5EndToEndLoopbackCells
Total transmitted OAM F5 end-to-end loopback cells. Aggregate of
juniAtmCircuitOutOamF5EndToEndLoopbackCmds and
juniAtmCircuitOutOamF5EndToEndLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15
juniAtmCircuitOutOamF5SegmentLoopbackCells
Total transmitted OAM F5 segment loopback cells. Aggregate of
juniAtmCircuitOutOamF5SegmentLoopbackCmds and
juniAtmCircuitOutOamF5SegmentLoopbackRsps
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16
juniAtmCircuitOutOamF5RdiCells
Transmitted OAM F5 RDI cells.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17
juniAtmCircuitInOamF5EndToEndLoopbackCmds
Received OAM F5 end-to-end loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.18
juniAtmCircuitInOamF5EndToEndLoopbackRsps
Received OAM F5 end-to-end loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.19
juniAtmCircuitInOamF5SegmentLoopbackCmds
Received OAM F5 segment loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.20
juniAtmCircuitInOamF5SegmentLoopbackRsps
Received OAM F5 segment loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.21
juniAtmCircuitOutOamF5EndToEndLoopbackCmds
Transmitted OAM F5 end-to-end loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.22
juniAtmCircuitOutOamF5EndToEndLoopbackRsps
Transmitted OAM F5 end-to-end loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.23
juniAtmCircuitOutOamF5SegmentLoopbackCmds
Transmitted OAM F5 segment loopback commands.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.24
juniAtmCircuitOutOamF5SegmentLoopbackRsps
Transmitted OAM F5 segment loopback responses.
cellsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.25
juniAtmCircuitOamUpCount
Specifies the number of successive loopback cell responses to receive
before a PVC is up for connectivity verification.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.26
juniAtmCircuitOamDownCount
Specifies the number of successive loopback cell responses not received
before declaring a PVC down for connectivity verification.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.27
juniAtmCircuitOamRetryFrequency
Specifies the frequency (in seconds) to transmit loopback cells when
verifying PVC state (up or down) for connectivity verification.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.28
juniAtmCircuitOamAlarmDownCount
Specifies the number of successive alarm (AIS or RDI) cells to receive
before declaring a PVC down.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.29
juniAtmCircuitOamAlarmClearTimeout
Specifies how long to wait (in seconds) before declaring a PVC up after
it has stopped receiving alarm cells.
secondsInteger32r/w
Constraints:
range: 3-60
 .1.3.6.1.4.1.4874.2.2.8.1.3.4.1.30

juniAtmSubIfVccTrafficShapingTable

table
.1.3.6.1.4.1.4874.2.2.8.1.3.5 · 1 row entry · 5 columns
Open in standard view 
This table contains entries for traffic shaping of ATM VCCs configured
on ATM subinterfaces present in the system.  This table augments the
juniAtmSubIfVccTable only for VCCs that support traffic shapping.
          
Attributes in this entry can only be configured at entry creation, and
remain fixed for the lifetime of the entry.
juniAtmSubIfVccTrafficShapingEntry entry .1.3.6.1.4.1.4874.2.2.8.1.3.5.1
Each entry describes the traffic shping characteristics of an ATM
subinterface VCC.
Indexes
No indexes recorded
Column Syntax OID
juniAtmSubIfVccTrafficShapingCdvt
The network cell delay variation tolerance (CDVT) in tenths of a
microsecond.
tenths of a microsecondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1
juniAtmSubIfVccTrafficShapingClp0
Specifies whether or not only CLP0 cells are to be policed according to
the traffic contract. CLP1 cells are forwarded on a best-effort basis
CLP-significant model for (VBR.2, VBR.3 conformance). Applicable only
for V…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2
juniAtmSubIfVccTrafficShapingTagging
Specifies whether or not CLP0 cells should be tagged for SCR policing
(VBR.3 conformance). Applicable only for VBR circuits.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3
juniAtmSubIfVccTrafficShapingPoliceObserve
Specifies whether of not no policing action is to be taken (note the
double negative; if true(1) then no policing action will be taken; if
false(2) then policing action will be taken). Regardless of the state
of this o…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4
juniAtmSubIfVccTrafficShapingPacketShaping
Specifies whether of not to shape output traffic on a packet boundary.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5

juniAtmSubIfSvcConfigTable

table deprecated
.1.3.6.1.4.1.4874.2.2.8.1.3.6 · 1 row entry · 13 columns
Open in standard view 
This table contains entries for extending the juniAtmSubIfTable to
configure switched virtual connection (SVC) on the subinterfaces.
juniAtmSubIfSvcConfigEntry entry .1.3.6.1.4.1.4874.2.2.8.1.3.6.1
Each entry provides configuration parameters for an ATM SVC on the
subinterface.
Indexes
juniAtmSubIfIndex
Column Syntax OID
juniAtmSubIfSvcRowStatus deprecated
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1
juniAtmSubIfSvcConfigDestAtmAddress deprecated
Specifies the destination ATM NSAP address of the circuit.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2
juniAtmSubIfSvcConfigCircuitType deprecated
Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM.
Enumerationr/w
Enumerated Values:
0rfc1483VcMux
1rfc1483Llc
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3
juniAtmSubIfSvcConfigServiceCategory deprecated
Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
r…
Enumerationr/w
Enumerated Values:
0ubr
1ubrPcr
2nrtVbr
3cbr
4rtVbr
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4
juniAtmSubIfSvcConfigPcr deprecated
Peak Cell Rate, in kilo-bits per second (kbps), of this circuit.
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5
juniAtmSubIfSvcConfigScr deprecated
Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit.
kbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6
juniAtmSubIfSvcConfigMbs deprecated
Maximum Burst Size, in cells, of this circuit.
cellsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7
juniAtmSubIfSvcConfigCdvt obsolete
Specify the network Cell Delay Variation Tolerance.
100usSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8
juniAtmSubIfSvcConfigClp0 deprecated
Specify that only CLP0 cells are to be policed according to the traffic
contract. CLP1 cells are forwarded on a best-effort basis
CLP-significant model for (VBR.2, VBR.3 conformance).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9
juniAtmSubIfSvcConfigTagging deprecated
Specify that CLP0 cells should be tagged for SCR policing (VBR.3
conformance).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10
juniAtmSubIfSvcConfigObserve obsolete
Specify that no policing action is to be taken; only counters are
incremented.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11
juniAtmSubIfSvcConfigPacketDiscard deprecated
Enable early packet Discard for this circuit.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12
juniAtmSubIfSvcConfigDestE164Address obsolete
Specifies the destination ATM E164 address of the circuit.
OctetStringr/w
Constraints:
range: 0-0
range: 8-8
 .1.3.6.1.4.1.4874.2.2.8.1.3.6.1.13

juniAtmNbmaMapTable

table
.1.3.6.1.4.1.4874.2.2.8.1.4.1 · 1 row entry · 8 columns
Open in standard view 
This table contains entries for ATM NBMA maps.
juniAtmNbmaMapEntry entry .1.3.6.1.4.1.4874.2.2.8.1.4.1.1
Each entry describes the characteristics of an ATM NBMA map.
Indexes
juniAtmNbmaMapName juniAtmNbmaMapVcd
Column Syntax OID
juniAtmNbmaMapName
The NBMA map name.
JuniAtmNbmaMapName
Textual Convention: JuniAtmNbmaMapName OctetString
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1
juniAtmNbmaMapVcd
An integer identifier for the ATM circuit, used in conjunction with the
command-line interface.

The value must be unique among VCs configured on the same ATM
interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2
juniAtmNbmaMapIpAddress
The IP address associated with this entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3
juniAtmNbmaMapVpi
The VPI identifier of the ATM circuit.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4
juniAtmNbmaMapVci
The VCI identifier of the ATM circuit.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5
juniAtmNbmaMapIfIndex
The ifIndex of the ATM major interface associated with this entry.
The value of this object will be zero when the map is not applied
to an interface.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6
juniAtmNbmaMapBroadcast
The broadcast enable/disable setting for this entry. The value true(1)
enable broadcast support; disable(2) disabled broadcast support for this
entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7
juniAtmNbmaMapRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

Additional notes to aid the…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8

juniAtmNbmaMapListTable

table
.1.3.6.1.4.1.4874.2.2.8.1.4.2 · 1 row entry · 2 columns
Open in standard view 
This table contains entries for ATM NBMA map lists.
juniAtmNbmaMapListEntry entry .1.3.6.1.4.1.4874.2.2.8.1.4.2.1
Each entry describes the characteristics of an ATM NBMA map.
Indexes
juniAtmNbmaMapListName
Column Syntax OID
juniAtmNbmaMapListName
The NBMA Map List name.
JuniAtmNbmaMapName
Textual Convention: JuniAtmNbmaMapName OctetString
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1
juniAtmNbmaMapListRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2

juniAtmVpPingTable

table
.1.3.6.1.4.1.4874.2.2.8.1.5.2 · 1 row entry · 9 columns
Open in standard view 
This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB
atmM4VpTestTable to do ping (multiple loopback) type testing.
juniAtmVpPingEntry entry .1.3.6.1.4.1.4874.2.2.8.1.5.2.1
Each entry describes the characteristics, status and results of the
most recent ATM ping test.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi ATM-FORUM-SNMP-M4-MIBatmfM4VpTestObject
Column Syntax OID
juniAtmVpPingProbeCount
The number of ping probes (OAM cells) to be sent to complete the test.
probesUnsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1
juniAtmVpPingTimeOut
Specifies the time-out value, in seconds, for a remote ping operation.
secondsUnsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2
juniAtmVpPingCtlTrapGeneration
The value of this object determines when and if to generate a
notification for this entry:

testCompletion(0) - Generate a juniPingTestCompleted notification.

The value of this object defaul…
Bitsr/w
Enumerated Values:
0testCompletion
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3
juniAtmVpPingSentProbes
The number of ping probes (OAM cells) that have been sent thus far for
this test. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
probesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4
juniAtmVpPingProbeResponses
The number of ping responses that have been received thus far for this
test. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
probesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5
juniAtmVpPingStartTime
The time (sysUpTime) when the test started.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6
juniAtmVpPingMinRtt
The shortest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero …
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7
juniAtmVpPingMaxRtt
The longest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero f…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8
juniAtmVpPingAverageRtt
The average round-trip-time (RTT) for all the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A
value of ze…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9

juniAtmVcPingTable

table
.1.3.6.1.4.1.4874.2.2.8.1.5.3 · 1 row entry · 9 columns
Open in standard view 
This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB
atmM4VcTestTable to do ping (multiple loopback) type testing.
juniAtmVcPingEntry entry .1.3.6.1.4.1.4874.2.2.8.1.5.3.1
Each entry describes the characteristics, status and results of the
most recent ATM ping test.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci ATM-FORUM-SNMP-M4-MIBatmfM4VcTestObject
Column Syntax OID
juniAtmVcPingProbeCount
The number of ping probes (OAM cells) to be sent to complete the test.
probesUnsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1
juniAtmVcPingTimeOut
Specifies the time-out value, in seconds, for a remote ping operation.
secondsUnsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2
juniAtmVcPingCtlTrapGeneration
The value of this object determines when and if to generate a
notification for this entry:
testCompletion(0) - Generate a juniPingTestCompleted notification.

The value of this object defaults to zero,…
Bitsr/w
Enumerated Values:
0testCompletion
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3
juniAtmVcPingSentProbes
The number of ping probes (OAM cells) that have been sent thus far for
this test. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
probesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4
juniAtmVcPingProbeResponses
The number of ping responses that have been received thus far for this
test. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
probesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5
juniAtmVcPingStartTime
The time (sysUpTime) when the test started.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6
juniAtmVcPingMinRtt
The shortest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero …
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7
juniAtmVcPingMaxRtt
The longest round-trip-time (RTT) for the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of zero f…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8
juniAtmVcPingAverageRtt
The average round-trip-time (RTT) for all the pings that have received
responses. The value of this object MUST be set to zero when the
atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A
value of ze…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9

juniAtmSubIfLocationTable

table
.1.3.6.1.4.1.4874.2.2.8.1.6.2 · 1 row entry · 2 columns
Open in standard view 
The entries in this table report the ifIndex of ATM Subinterfaces by
location.
juniAtmSubIfLocationEntry entry .1.3.6.1.4.1.4874.2.2.8.1.6.2.1
A specification of ATM subinterfaces by location.
Indexes
juniAtmSubIfLocationIndex juniAtmSubIfDistinguisher
Column Syntax OID
juniAtmSubIfLocationIndex
The value of a platform interface location.
Juniper-TCJuniInterfaceLocationValue
Textual Convention: Juniper-TCJuniInterfaceLocationValue OctetString
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.4874.2.2.8.1.6.2.1.1
juniAtmSubIfLocationIfIndex
The ifIndex value of this subinterface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.6.2.1.2

juniAtmVcClassNameTable

table
.1.3.6.1.4.1.4874.2.2.8.1.7.1 · 1 row entry · 3 columns
Open in standard view 
The entries in this table provide mappings of ATM VC class names to 
local integer identifiers. These integers are used as indexes into other 
MIB tables containing ATM VC attributes associated with the same VC class name.
juniAtmVcClassNameEntry entry .1.3.6.1.4.1.4874.2.2.8.1.7.1.1
A mapping of ATM VC class name to an integer identifier for the ATM VC class.
Indexes
juniAtmVcClassName
Column Syntax OID
juniAtmVcClassName
The ATM VC class name uniquely identifying this entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.1
juniAtmVcClassNameRowStatus
Controls creation/deletion of entries in this table. Only the values
'createAndGo' ,'destroy', 'active' and 'notInService' may be SET.
The SNMP manager would set the row status to notInService before making
any VC c…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.2
juniAtmVcClassNameId
The integer identifier associated with this VC class name. The value of
this identifier is assigned by the device when an entry in this table
is created.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.7.1.1.3

juniAtmVcClassIdTable

table
.1.3.6.1.4.1.4874.2.2.8.1.7.2 · 1 row entry · 2 columns
Open in standard view 
Provides inverse mapping of ATM VC class IDs to ATM VC class names.
juniAtmVcClassIdEntry entry .1.3.6.1.4.1.4874.2.2.8.1.7.2.1
A mapping of an integer identifier to an ATM VC class name.
Indexes
juniAtmVcClassIdId
Column Syntax OID
juniAtmVcClassIdId
The integer identifier associated with this ATM VC class name.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.7.2.1.1
juniAtmVcClassIdName
The ATM VC class name having the associated identifier.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.4874.2.2.8.1.7.2.1.2

juniAtmVcClassTable

table
.1.3.6.1.4.1.4874.2.2.8.1.7.3 · 1 row entry · 15 columns
Open in standard view 
This table contains Juniper ATM VC Class entries which can be used 
to specify the ATM PVC attributes either at creation or modification 
time. A row in this table with default values is created when an entry 
in juniAtmVcClassNameTable is created.
juniAtmVcClassEntry entry .1.3.6.1.4.1.4874.2.2.8.1.7.3.1
Each entry contains the attributes of the ATM VC which would be
applied to the VC either at creation or modification time when this
ATM VC class is associated to it.
Indexes
juniAtmVcClassId
Column Syntax OID
juniAtmVcClassId
The integer identifier associated with this ATM VC class. A value
for this identifier is determined by locating or creating an ATM VC
class name in the juniAtmVcClassNameTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1
juniAtmVcClassVccType
Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VC Mux and LLC
formats…
Enumerationr/w
Enumerated Values:
0rfc1483VcMux
1rfc1483Llc
2autoconfig
3aal5
4aal0
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2
juniAtmVcClassVccServiceCategory
Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bit Rate.
cbr Constant Bit Rate.
r…
Enumerationr/w
Enumerated Values:
0ubr
1ubrPcr
2nrtVbr
3cbr
4rtVbr
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3
juniAtmVcClassVccPcr
Peak Cell Rate, in kilobits per second (kbps), of this circuit.

This parameter is only required when juniAtmVcClassVccServiceCategory is
configured to have one of the following values:
ubrPcr
nrtV…
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4
juniAtmVcClassVccScr
Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbr
kbpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5
juniAtmVcClassVccMbs
Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbr
cellsInteger32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6
juniAtmVcClassVccOamAdminStatus
The OAM VC integrity administrative state of the ATM VC associated
with this class.
Enumerationr/w
Enumerated Values:
1oamAdminStateDisabled
2oamAdminStateEnabled
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7
juniAtmVcClassVccOamLoopbackFrequency
The OAM loopback frequency in seconds.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8
juniAtmVcClassVccOamUpCount
Specifies the number of successive loopback cell responses to
receive before the ATM VC associated with this class is declared
up for connectivity verification.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9
juniAtmVcClassVccOamDownCount
Specifies the number of successive loopback cell responses not
received before declaring the ATM VC associated with this class
as down for connectivity verification.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10
juniAtmVcClassVccOamRetryFrequency
Specifies the frequency (in seconds) to transmit loopback cells
when verifying the ATM VC operational state associated with this
class (up or down) for connectivity verification.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11
juniAtmVcClassVccOamAlarmDownCount
Specifies the number of successive alarm (AIS or RDI) cells to
receive before declaring the ATM VC associated with class as down.
cellsInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12
juniAtmVcClassVccOamAlarmClearTimeout
Specifies how long to wait (in seconds) before declaring the ATM VC
associated with class as up after it has stopped receiving alarm cells.
secondsInteger32r/w
Constraints:
range: 3-60
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13
juniAtmVcClassVccInverseArp
Enables the inverse ARP protocol on the ATM VC associated with this
class; true(1) enables the protocol, false(2) disables it.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14
juniAtmVcClassVccInverseArpRefresh
The refresh rate in minutes between inverse ARP protocol messages.
minutesInteger32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15