juniAtmIfRowStatus
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2
Object
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmIfRowStatus
juniAtmIfLowerIfIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmIfIndex must have been determined previously, by
reading juniAtmNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniAtmIfEntry
- Table
- juniAtmIfTable
- Siblings
- 25
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmIfIndex The ifIndex of the ATM interface. When creating entries in this table,
suitable values for this object are determined by reading
juniAtmNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 |
| juniAtmIfOamCellRxAdminState Use to specify the OAM Cell Receive Administrative state on this
interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 |
| juniAtmIfInCells The total number of cells received on this major interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 |
| juniAtmIfOutCells The total number of cells transmitted on this major interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 |
| juniAtmIfVcCount The total number of circuits configured on this interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 |
| juniAtmIfMapGroup The NBMA map group this interface is associated with. | column | JuniAtmNbmaMapNameOrNull | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 |
| juniAtmIfCacAdminState The administrative staus of CAC on this ATM major interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 |
| juniAtmIfCacUbrWeight The bandwidth associated with every UBR and UBR with PCR connection
configured on the ATM major interface. This value is used for CAC
computation. The units are kilo-bits per se… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 |
| juniAtmIfCacSubscriptionBandwidth The subscribed bandwidth of the ATM major interface. If this value is
not specified or set to 0, the effective port bandwidth is used. When a
Get operation is performed the curr… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 |
| juniAtmIfCacAvailableBandwidth The available bandwidth in Tx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per seco… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 |
| juniAtmIfCacAvailableBandwidthRx deprecated The available bandwidth in Rx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per seco… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19 |
| juniAtmIfE164Autoconversion obsolete The status of E164 autoconversion feature in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20 |
| juniAtmIfE164Gateway obsolete The status of E164 gateway feature in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21 |
| juniAtmIfE164OneToOneAddrTrans obsolete The status of E164 one-to-one address translation feature in the ATM
interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22 |
| juniAtmIfOamCellFilter The type of OAM cells to discard when juniAtmIfOamCellRxAdminState is
set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards
received OAM AIS and RDI cells. The… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 |
| juniAtmIfCacUsedBandwidthUpper The most significant 32 bits of the CAC used bandwidth on the ATM major
interface. The least significant 32 bits of the CAC used bandwidth are
specified by juniAtmIfCacUsedBandwi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 |
| juniAtmIfCacUsedBandwidthLower The least significant 32 bits of the CAC used bandwidth on the ATM
major interface. The most significant 32 bits of the CAC used bandwidth
are specified by juniAtmIfCacUsedBandwi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 |
| juniAtmIfAssociatedVcClassId The integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAt… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26 |
| juniAtmIfLowerIfIndex The ifIndex of an interface over which this ATM interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value b… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 |
| juniAtmIfIlmiVpi The VPI of the ILMI of a major ATM interface. | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 |
| juniAtmIfIlmiVci The VCI of the ILMI of a major ATM interface. | column | ATM-TC-MIBAtmVcIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 |
| juniAtmIfIlmiVcd An integer identifier for the ILMI, used in conjunction with the
command-line interface.
The value must be unique among VCs configured on the same ATM
interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 |
| juniAtmIfIlmiPollFrequency The amount of time in seconds between successive transmissions of ILMI
messages on this interface for the purpose of detecting loss of ILMI
connectivity. The distinguished value … | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 |
| juniAtmIfIlmiAdminState The administrative status of ILMI in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 |
| juniAtmIfUniVersion Use to specify the User Network Interface (UNI) the router should use
when ILMI link auto determination is unsuccesful or ILMI is disabled. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 |