juniAtmSubIfVccRowStatus

Juniper-UNI-ATM-MIB · .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3

Object

column r/w SNMPv2-TCRowStatus

Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
    createAndGo
    destroy
              
To create an entry in this table, the following entry objects MUST be
explicitly configured:
    juniAtmSubIfVccRowStatus
              
In addition, when creating an entry the following conditions must hold:
    The ATM Subinterface identified by juniAtmSubIfIndex must exist.
              
    A positive value configured for juniAtmSubIfVccVcd must not already
    be assigned to an existing VCC.
              
    For each value of juniAtmSubIfVccServiceCategory, additional
    dependent objects in the entry require configuration as identified
    here:
              
    juniAtmSubIfVccServiceCategory    Requires configuration of:
    ------------------------------------------------------------
    ubr                             <none>
              
    ubrPcr                          juniAtmSubIfVccPcr
              
    nrtVbr                          juniAtmSubIfVccPcr
                                    juniAtmSubIfVccScr
                                    juniAtmSubIfVccMbs
              
    cbr                             juniAtmSubIfVccPcr
              
    rtVbr                           juniAtmSubIfVccPcr
                                    juniAtmSubIfVccScr
                                    juniAtmSubIfVccMbs
    ------------------------------------------------------------
              
Attributes in this entry can only be configured at entry creation,
and remain fixed for the lifetime of the entry.

Context

MIB: Juniper-UNI-ATM-MIB
OID: .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3
Type: column
Access: readwrite
Status: current
Parent: juniAtmSubIfVccEntry
Table: juniAtmSubIfVccTable
Siblings: 11

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
juniAtmSubIfVccVpi The VPI of the ATM VCC used by this subinterface.	column	ATM-TC-MIBAtmVpIdentifier	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1`
juniAtmSubIfInverseArp Enables the inverse ARP protocol on this VCC; true(1) enables the protocol, false(2) disables it.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10`
juniAtmSubIfInverseArpRefresh The refresh rate in minutes between inverse ARP protocol messages.	column	minutes Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11`
juniAtmSubIfVccAssociatedVcClassId The integer identifier of the ATM VC class associated with this ATM sub interface. A value for this identifier is determined by locating or creating an ATM VC class name in the …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12`
juniAtmSubIfVccVci The VCI of the ATM VCC used by this subinterface.	column	ATM-TC-MIBAtmVcIdentifier	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2`
juniAtmSubIfVccVcd An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must b…	column	Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4`
juniAtmSubIfVccType Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'autoconfig' value will…	column	Enumeration	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5`
juniAtmSubIfVccServiceCategory Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bi…	column	Enumeration	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6`
juniAtmSubIfVccPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have one of the…	column	kbps Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7`
juniAtmSubIfVccScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have the f…	column	kbps Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8`
juniAtmSubIfVccMbs Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have the following value: nr…	column	cells Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9`