juniAtmSubIfRowStatus
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2
Object
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniAtmSubIfRowStatus
juniAtmSubIfLowerIndex
In addition, when creating an entry the following condition must hold:
A value for juniAtmSubIfIndex must have been determined previously,
by reading juniAtmSubIfNextIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created or
destroyed as a result of creating/destroying an entry in this table.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniAtmSubIfEntry
- Table
- juniAtmSubIfTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmSubIfIndex The ifIndex of the ATM Subinterface. When creating entries in this
table, suitable values for this object are determined by reading
juniAtmSubNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 |
| juniAtmSubIfMartiniTimeoutTimerId The timer identifier used to abandon cell aggregation when no
cells are supplied for transmission in ATM Martini cell-relay mode. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.10 |
| juniAtmSubIfAssociatedVcClassId The integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.11 |
| juniAtmSubIfDistinguisher An integer identifier for the subinterface, used in conjunction with
the command-line interface. It is provided here for cross-reference
purposes only.
The value m… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 |
| juniAtmSubIfLowerIfIndex The ifIndex of an ATM AAL5 interface over which this ATM subinterface
is to be layered. A value of zero indicates no layering. An
implementation may choose to require that a non… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 |
| juniAtmSubIfNbma The NBMA administrative setting. Setting this value of this object to
true(1) will enable multipoint access on this interface. Setting the
value to false(2), will enable point t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 |
| juniAtmSubIfAddress deprecated Specifies the local ATM NSAP address of the circuit. A GET operation
returns a full 20-octet NSAP. A SET operation only requires 7 octets,
since the prefix can be implied. | column | OctetString | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 |
| juniAtmSubIfMtu The size of the largest packet which can be sent/received on the
interface, specified in octets. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.7 |
| juniAtmSubIfAdvisoryRxSpeed Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for
underlying circuit r… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.8 |
| juniAtmSubIfMartiniMaxCellsPerPacket The number of cells that can be aggregated in a single ATM Martini
packet in cell-relay mode. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.2.1.9 |