juniAtmVcClassVccOamAdminStatus
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7
Object
column
r/w
Enumeration
The OAM VC integrity administrative state of the ATM VC associated with this class.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniAtmVcClassEntry
- Table
- juniAtmVcClassTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | oamAdminStateDisabled |
2 | oamAdminStateEnabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmVcClassId The integer identifier associated with this ATM VC class. A value
for this identifier is determined by locating or creating an ATM VC
class name in the juniAtmVcClassNameTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 |
| juniAtmVcClassVccOamDownCount Specifies the number of successive loopback cell responses not
received before declaring the ATM VC associated with this class
as down for connectivity verification. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 |
| juniAtmVcClassVccOamRetryFrequency Specifies the frequency (in seconds) to transmit loopback cells
when verifying the ATM VC operational state associated with this
class (up or down) for connectivity verification. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 |
| juniAtmVcClassVccOamAlarmDownCount Specifies the number of successive alarm (AIS or RDI) cells to
receive before declaring the ATM VC associated with class as down. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 |
| juniAtmVcClassVccOamAlarmClearTimeout Specifies how long to wait (in seconds) before declaring the ATM VC
associated with class as up after it has stopped receiving alarm cells. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 |
| juniAtmVcClassVccInverseArp Enables the inverse ARP protocol on the ATM VC associated with this
class; true(1) enables the protocol, false(2) disables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 |
| juniAtmVcClassVccInverseArpRefresh The refresh rate in minutes between inverse ARP protocol messages. | column | minutes Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 |
| juniAtmVcClassVccType Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value wil… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 |
| juniAtmVcClassVccServiceCategory Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bi… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 |
| juniAtmVcClassVccPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory is
configured to have one of t… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 |
| juniAtmVcClassVccScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following val… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 |
| juniAtmVcClassVccMbs Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbr | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 |
| juniAtmVcClassVccOamLoopbackFrequency The OAM loopback frequency in seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 |
| juniAtmVcClassVccOamUpCount Specifies the number of successive loopback cell responses to
receive before the ATM VC associated with this class is declared
up for connectivity verification. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 |