juniAtmVcClassVccType

Juniper-UNI-ATM-MIB · .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2
MIB view Table view

Object

column r/w Enumeration 
Specifies the encapsulation used by the circuit to carry IP datagrams. 
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect 
over ATM. The 'autoconfig' value will recognize both VC Mux and LLC 
formats. The 'aal5' and 'aal0' values are used for encapsulation 
methods for transport of ATM frames and cells over IP and MPLS networks 
when no encapsulation method is specified.

Context

MIB
Juniper-UNI-ATM-MIB
OID
.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2
Type
column
Access
readwrite
Status
current
Parent
juniAtmVcClassEntry
Table
juniAtmVcClassTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
0rfc1483VcMux
1rfc1483Llc
2autoconfig
3aal5
4aal0

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniAtmVcClassId
The integer identifier associated with this ATM VC class. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtmVcClassNameTable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1
juniAtmVcClassVccOamDownCount
Specifies the number of successive loopback cell responses not received before declaring the ATM VC associated with this class as down for connectivity verification.
columncells Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10
juniAtmVcClassVccOamRetryFrequency
Specifies the frequency (in seconds) to transmit loopback cells when verifying the ATM VC operational state associated with this class (up or down) for connectivity verification.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11
juniAtmVcClassVccOamAlarmDownCount
Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring the ATM VC associated with class as down.
columncells Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12
juniAtmVcClassVccOamAlarmClearTimeout
Specifies how long to wait (in seconds) before declaring the ATM VC associated with class as up after it has stopped receiving alarm cells.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13
juniAtmVcClassVccInverseArp
Enables the inverse ARP protocol on the ATM VC associated with this class; true(1) enables the protocol, false(2) disables it.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14
juniAtmVcClassVccInverseArpRefresh
The refresh rate in minutes between inverse ARP protocol messages.
columnminutes Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15
juniAtmVcClassVccServiceCategory
Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bi…
columnEnumeration.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3
juniAtmVcClassVccPcr
Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have one of t…
columnkbps Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4
juniAtmVcClassVccScr
Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have the following val…
columnkbps Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5
juniAtmVcClassVccMbs
Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have the following value: nrtVbr rtVbr
columncells Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6
juniAtmVcClassVccOamAdminStatus
The OAM VC integrity administrative state of the ATM VC associated with this class.
columnEnumeration.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7
juniAtmVcClassVccOamLoopbackFrequency
The OAM loopback frequency in seconds.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8
juniAtmVcClassVccOamUpCount
Specifies the number of successive loopback cell responses to receive before the ATM VC associated with this class is declared up for connectivity verification.
columncells Integer32.1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9