juniAtmVcClassEntry
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.7.3.1
Object
row
Each entry contains the attributes of the ATM VC which would be applied to the VC either at creation or modification time when this ATM VC class is associated to it.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.7.3.1- Type
- row
- Status
- current
- Parent
- juniAtmVcClassTable
- Table
- juniAtmVcClassTable
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmVcClassId The integer identifier associated with this ATM VC class. A value
for this identifier is determined by locating or creating an ATM VC
class name in the juniAtmVcClassNameTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 |
| juniAtmVcClassVccOamDownCount Specifies the number of successive loopback cell responses not
received before declaring the ATM VC associated with this class
as down for connectivity verification. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 |
| juniAtmVcClassVccOamRetryFrequency Specifies the frequency (in seconds) to transmit loopback cells
when verifying the ATM VC operational state associated with this
class (up or down) for connectivity verification. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 |
| juniAtmVcClassVccOamAlarmDownCount Specifies the number of successive alarm (AIS or RDI) cells to
receive before declaring the ATM VC associated with class as down. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 |
| juniAtmVcClassVccOamAlarmClearTimeout Specifies how long to wait (in seconds) before declaring the ATM VC
associated with class as up after it has stopped receiving alarm cells. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 |
| juniAtmVcClassVccInverseArp Enables the inverse ARP protocol on the ATM VC associated with this
class; true(1) enables the protocol, false(2) disables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 |
| juniAtmVcClassVccInverseArpRefresh The refresh rate in minutes between inverse ARP protocol messages. | column | minutes Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 |
| juniAtmVcClassVccType Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value wil… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 |
| juniAtmVcClassVccServiceCategory Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bi… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 |
| juniAtmVcClassVccPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory is
configured to have one of t… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 |
| juniAtmVcClassVccScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following val… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 |
| juniAtmVcClassVccMbs Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmVcClassVccServiceCategory
is configured to have the following value:
nrtVbr
rtVbr | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 |
| juniAtmVcClassVccOamAdminStatus The OAM VC integrity administrative state of the ATM VC associated
with this class. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 |
| juniAtmVcClassVccOamLoopbackFrequency The OAM loopback frequency in seconds. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 |
| juniAtmVcClassVccOamUpCount Specifies the number of successive loopback cell responses to
receive before the ATM VC associated with this class is declared
up for connectivity verification. | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmVcClassId The integer identifier associated with this ATM VC class. A value
for this identifier is determined by locating or creating an ATM VC
class name in the juniAtmVcClassNameTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 |