juniAtmIfIlmiPollFrequency
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7
Object
column
r/w
seconds Integer32
The amount of time in seconds between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- juniAtmIfEntry
- Table
- juniAtmIfTable
- Siblings
- 25
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmIfIndex The ifIndex of the ATM interface. When creating entries in this table,
suitable values for this object are determined by reading
juniAtmNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 |
| juniAtmIfOamCellRxAdminState Use to specify the OAM Cell Receive Administrative state on this
interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 |
| juniAtmIfInCells The total number of cells received on this major interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 |
| juniAtmIfOutCells The total number of cells transmitted on this major interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 |
| juniAtmIfVcCount The total number of circuits configured on this interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 |
| juniAtmIfMapGroup The NBMA map group this interface is associated with. | column | JuniAtmNbmaMapNameOrNull | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 |
| juniAtmIfCacAdminState The administrative staus of CAC on this ATM major interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 |
| juniAtmIfCacUbrWeight The bandwidth associated with every UBR and UBR with PCR connection
configured on the ATM major interface. This value is used for CAC
computation. The units are kilo-bits per se… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 |
| juniAtmIfCacSubscriptionBandwidth The subscribed bandwidth of the ATM major interface. If this value is
not specified or set to 0, the effective port bandwidth is used. When a
Get operation is performed the curr… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 |
| juniAtmIfCacAvailableBandwidth The available bandwidth in Tx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per seco… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 |
| juniAtmIfCacAvailableBandwidthRx deprecated The available bandwidth in Rx direction of the ATM major interface. As
connections are added or deleted on the interface, this value is
updated. The units are kilo-bits per seco… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19 |
| juniAtmIfRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 |
| juniAtmIfE164Autoconversion obsolete The status of E164 autoconversion feature in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20 |
| juniAtmIfE164Gateway obsolete The status of E164 gateway feature in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21 |
| juniAtmIfE164OneToOneAddrTrans obsolete The status of E164 one-to-one address translation feature in the ATM
interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22 |
| juniAtmIfOamCellFilter The type of OAM cells to discard when juniAtmIfOamCellRxAdminState is
set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards
received OAM AIS and RDI cells. The… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 |
| juniAtmIfCacUsedBandwidthUpper The most significant 32 bits of the CAC used bandwidth on the ATM major
interface. The least significant 32 bits of the CAC used bandwidth are
specified by juniAtmIfCacUsedBandwi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 |
| juniAtmIfCacUsedBandwidthLower The least significant 32 bits of the CAC used bandwidth on the ATM
major interface. The most significant 32 bits of the CAC used bandwidth
are specified by juniAtmIfCacUsedBandwi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 |
| juniAtmIfAssociatedVcClassId The integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAt… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26 |
| juniAtmIfLowerIfIndex The ifIndex of an interface over which this ATM interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value b… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 |
| juniAtmIfIlmiVpi The VPI of the ILMI of a major ATM interface. | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 |
| juniAtmIfIlmiVci The VCI of the ILMI of a major ATM interface. | column | ATM-TC-MIBAtmVcIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 |
| juniAtmIfIlmiVcd An integer identifier for the ILMI, used in conjunction with the
command-line interface.
The value must be unique among VCs configured on the same ATM
interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 |
| juniAtmIfIlmiAdminState The administrative status of ILMI in the ATM interface. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 |
| juniAtmIfUniVersion Use to specify the User Network Interface (UNI) the router should use
when ILMI link auto determination is unsuccesful or ILMI is disabled. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 |