juniAtmSubIfVccVcd
Juniper-UNI-ATM-MIB ·
.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4
Object
column
r/w
Integer32
An integer identifier for the circuit, used in conjunction with the
command-line interface. It is provided here for cross-reference
purposes only.
The value must be unique among VCCs configured on the same underlying
ATM interface.
If this object is not configured, or is configured with a value of zero,
a value will be allocated internally and can be queried after table
entry creation has succeeded.
Context
- MIB
- Juniper-UNI-ATM-MIB
- OID
.1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniAtmSubIfVccEntry
- Table
- juniAtmSubIfVccTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniAtmSubIfVccVpi The VPI of the ATM VCC used by this subinterface. | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 |
| juniAtmSubIfInverseArp Enables the inverse ARP protocol on this VCC; true(1) enables the
protocol, false(2) disables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 |
| juniAtmSubIfInverseArpRefresh The refresh rate in minutes between inverse ARP protocol messages. | column | minutes Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 |
| juniAtmSubIfVccAssociatedVcClassId The integer identifier of the ATM VC class associated with this ATM
sub interface. A value for this identifier is determined by locating or
creating an ATM VC class name in the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12 |
| juniAtmSubIfVccVci The VCI of the ATM VCC used by this subinterface. | column | ATM-TC-MIBAtmVcIdentifier | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 |
| juniAtmSubIfVccRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 |
| juniAtmSubIfVccType Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 |
| juniAtmSubIfVccServiceCategory Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-RealTime Variable Bi… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 |
| juniAtmSubIfVccPcr Peak Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have one of the… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 |
| juniAtmSubIfVccScr Sustained Cell Rate, in kilobits per second (kbps), of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the f… | column | kbps Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 |
| juniAtmSubIfVccMbs Maximum Burst Size, in cells, of this circuit.
This parameter is only required when juniAtmSubIfVccServiceCategory is
configured to have the following value:
nr… | column | cells Integer32 | .1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 |