ATM-FORUM-SNMP-M4-MIB
This MIB module is the SNMP version of the ATM Forum's
M4 interface (network element view).
atmfM4MIB
1.3.6.1.4.1.353.5.1.3.1
Imported Objects
| ATM-MIB | atmVcCrossConnectEntry atmVcCrossConnectH2LOperStatus atmVcCrossConnectL2HOperStatus atmVclEntry atmVclOperStatus atmVclVci atmVclVpi atmVpCrossConnectEntry atmVpCrossConnectH2LOperStatus atmVpCrossConnectL2HOperStatus atmVplEntry atmVplOperStatus atmVplVpi |
| ENTITY-MIB | entPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalParentRelPos |
| HOST-RESOURCES-MIB | hrSWInstalledIndex hrSWInstalledName |
| IF-MIB | ifIndex ifOperStatus OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType DateAndTime DisplayString RowPointer RowStatus TestAndIncr TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
Type Definitions (2)
| AtmfM4AlarmLogSeverity | Enumeration |
cleared(-1)indeterminate(0)critical(1)major(2)minor(3)warning(4) |
| AtmfM4AlarmSeverity | Enumeration |
indeterminate(0)critical(1)major(2)minor(3)warning(4) |
Objects (226)
|
|
.1.3.6.1.4.1.353 |
|
|
|
.1.3.6.1.4.1.353.5 |
|
|
|
.1.3.6.1.4.1.353.5.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1 |
|
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.10 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.10.1 |
|
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.10.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.11 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.11.1 |
|
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.11.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.12 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.12.1 |
|
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.12.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.13 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.13.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.13.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.14 |
|
|
|
IF-MIBifIndexATM-MIBatmVplVpi | .1.3.6.1.4.1.353.5.1.3.1.1.14.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.14.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.15 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.15.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.15.1.1 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.15.1.2 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.15.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.15.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.15.1.5 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.16 |
|
|
|
IF-MIBifIndexatmfM4CellProtoHistIndex | .1.3.6.1.4.1.353.5.1.3.1.1.16.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.2 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.5 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.16.1.6 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.17 |
|
|
|
IF-MIBifIndexatmfM4CellProtoErrorCode | .1.3.6.1.4.1.353.5.1.3.1.1.17.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.17.1.1 |
|
|
SNMPv2-TCTimeStamp | .1.3.6.1.4.1.353.5.1.3.1.1.17.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.17.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.17.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.17.1.5 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.18 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.18.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.18.1.1 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.18.1.2 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.18.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.18.1.4 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.19 |
|
|
|
IF-MIBifIndexatmfM4TcProtoHistIndex | .1.3.6.1.4.1.353.5.1.3.1.1.19.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.19.1.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.19.1.2 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.19.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.19.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.19.1.5 |
|
|
SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.2 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.20 |
|
|
|
IF-MIBifIndexATM-MIBatmVplVpi | .1.3.6.1.4.1.353.5.1.3.1.1.20.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.1 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.2 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.5 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.6 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.20.1.7 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.21 |
|
|
|
IF-MIBifIndexATM-MIBatmVplVpiatmfM4VpUpcNpcHistIndex | .1.3.6.1.4.1.353.5.1.3.1.1.21.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.2 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.5 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.6 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.7 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.21.1.8 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.22 |
|
|
|
IF-MIBifIndexATM-MIBatmVclVpiATM-MIBatmVclVci | .1.3.6.1.4.1.353.5.1.3.1.1.22.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.1 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.2 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.5 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.6 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.22.1.7 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.23 |
|
|
|
IF-MIBifIndexATM-MIBatmVclVpiATM-MIBatmVclVciatmfM4VcUpcNpcHistIndex | .1.3.6.1.4.1.353.5.1.3.1.1.23.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.2 |
|
|
SNMPv2-TCTimeInterval | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.3 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.4 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.5 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.6 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.7 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.1.3.1.1.23.1.8 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.24 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.24.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.24.2 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.25 |
|
|
|
IF-MIBifIndexATM-MIBatmVplVpiatmfM4VpTestObject | .1.3.6.1.4.1.353.5.1.3.1.1.25.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.1 |
|
|
SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.3 |
|
|
SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.4 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.5 |
|
|
ObjectIdentifier | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.6 |
|
|
IF-MIBOwnerString | .1.3.6.1.4.1.353.5.1.3.1.1.25.1.7 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.26 |
|
|
|
IF-MIBifIndexATM-MIBatmVclVpiATM-MIBatmVclVciatmfM4VcTestObject | .1.3.6.1.4.1.353.5.1.3.1.1.26.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.1 |
|
|
SNMPv2-TCTestAndIncr | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.3 |
|
|
SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.4 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.5 |
|
|
ObjectIdentifier | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.6 |
|
|
IF-MIBOwnerString | .1.3.6.1.4.1.353.5.1.3.1.1.26.1.7 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.28 |
|
|
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.353.5.1.3.1.1.28.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.1 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.3 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.4 |
|
|
SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.5 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.6 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.28.1.7 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.29 |
|
|
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.353.5.1.3.1.1.29.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.29.1.1 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.29.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.29.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.29.1.4 |
|
|
SNMPv2-TCDateAndTime | .1.3.6.1.4.1.353.5.1.3.1.1.3 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.30 |
|
|
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.353.5.1.3.1.1.30.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.3 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.4 |
|
|
SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.5 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.30.1.6 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.32 |
|
|
|
atmfM4HwRunningSwHwIndexatmfM4HwRunningSwIndex | .1.3.6.1.4.1.353.5.1.3.1.1.32.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.32.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.32.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.32.1.3 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.33 |
|
|
|
atmfM4HwInstalledSwHwIndexatmfM4HwInstalledSwIndex | .1.3.6.1.4.1.353.5.1.3.1.1.33.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.33.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.33.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.33.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.33.1.4 |
|
|
AtmfM4AlarmSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.34 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.35 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.36 |
|
|
|
atmfM4AlarmSevProfileIndex | .1.3.6.1.4.1.353.5.1.3.1.1.36.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.36.1.1 |
|
|
SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.1.3.1.1.36.1.2 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.37 |
|
|
|
atmfM4AlarmSevProfileIndexatmfM4AlarmSevTrapId | .1.3.6.1.4.1.353.5.1.3.1.1.37.1 |
|
|
ObjectIdentifier | .1.3.6.1.4.1.353.5.1.3.1.1.37.1.1 |
|
|
AtmfM4AlarmSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.37.1.2 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.38 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.39 |
|
|
|
atmfM4TrapForwardingIndex | .1.3.6.1.4.1.353.5.1.3.1.1.39.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.1 |
|
|
SNMPv2-SMIIpAddress | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.2 |
|
|
ObjectIdentifier | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.3 |
|
|
SNMPv2-TCRowPointer | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.5 |
|
|
AtmfM4AlarmSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.6 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.7 |
|
|
SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.1.3.1.1.39.1.8 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.4 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.40 |
|
|
|
atmfM4TrapLogSrcatmfM4TrapLogType | .1.3.6.1.4.1.353.5.1.3.1.1.40.1 |
|
|
SNMPv2-SMIIpAddress | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.2 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.3 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.4 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.5 |
|
|
SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.1.3.1.1.40.1.6 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.41 |
|
|
|
atmfM4TrapLogSrcatmfM4TrapLogTypeatmfM4LoggedTrapIndex | .1.3.6.1.4.1.353.5.1.3.1.1.41.1 |
|
|
Unsigned32 | .1.3.6.1.4.1.353.5.1.3.1.1.41.1.1 |
|
|
SNMPv2-TCDateAndTime | .1.3.6.1.4.1.353.5.1.3.1.1.41.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.41.1.3 |
|
|
SNMPv2-TCRowPointer | .1.3.6.1.4.1.353.5.1.3.1.1.41.1.4 |
|
|
SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.1.3.1.1.41.1.5 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.42 |
|
|
|
atmfM4TrapLogSrcatmfM4TrapLogTypeatmfM4LoggedTrapIndex | .1.3.6.1.4.1.353.5.1.3.1.1.42.1 |
|
|
AtmfM4AlarmLogSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.42.1.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.42.1.2 |
|
|
SNMPv2-TCRowPointer | .1.3.6.1.4.1.353.5.1.3.1.1.42.1.3 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.42.1.4 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.42.1.5 |
|
|
AtmfM4AlarmLogSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.43 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.44 |
|
|
SNMPv2-TCRowPointer | .1.3.6.1.4.1.353.5.1.3.1.1.45 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.46 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.47 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.5 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.6 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.6.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.6.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.6.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.6.1.3 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.7 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.7.1 |
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.7.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.7.1.2 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.8 |
|
|
|
IF-MIBifIndex | .1.3.6.1.4.1.353.5.1.3.1.1.8.1 |
|
|
Enumeration | .1.3.6.1.4.1.353.5.1.3.1.1.8.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.353.5.1.3.1.1.8.1.2 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.8.1.3 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.8.1.4 |
|
|
SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.8.1.5 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.9 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.9.1 |
|
|
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.9.1.1 |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.3 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.3.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.3.2 |
Notifications / Traps (76)
| Name | OID | Description |
|---|---|---|
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.1 |
Indicates that an AIS alarm condition has occurred on the physical path TP associated with the specified interface. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.10 |
Indicates that a signal label mismatch has occurred on the physical path TP associated with the specified interface. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.11 |
Indicates that an AIS alarm condition has occurred on the VPL TP associated with the specified interface and VPI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.12 |
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPL TP associated with the specified interface and VPI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.13 |
Indicates that an AIS alarm condition has occurred on the VPC TP associated with the specified interface and VPI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.14 |
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VPC TP associated with the specified interface and VPI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.15 |
Indicates that an AIS alarm condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.16 |
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.17 |
Indicates that an AIS alarm condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.18 |
Indicates that an RDI (Remote Defect Indication) condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI. |
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.19 |
Indicates that a back-plane failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.2 |
Indicates that an LCD (Loss of Cell Delineation) condition has occurred on the TC Adapter associated with the specified interface. |
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.20 |
Indicates that a call establishment error condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.21 |
Indicates that a congestion condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.22 |
Indicates that an external interface device problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.23 |
Indicates that a line-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.24 |
Indicates that a multiplexer problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.25 |
Indicates that a power problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.26 |
Indicates that a processor problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.27 |
Indicates that a protection path problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.28 |
Indicates that a receiver failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.29 |
Indicates that a plug-in unit missing condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.3 |
Indicates that an LOF (Loss of Frame) condition has occurred on the physical path TP associated with the specified interface. |
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.30 |
Indicates that a plug-in unit problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.31 |
Indicates that a plug-in unit type mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.32 |
Indicates that a timing problem alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.33 |
Indicates that a transmitter failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.34 |
Indicates that a trunk-card problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.35 |
Indicates that a storage capacity problem condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.36 |
Indicates that a memory mismatch alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.37 |
Indicates that a corrupt data alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.38 |
Indicates that a software environment problem
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.39 |
Indicates that a software download failure
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.4 |
Indicates that an LOP (Loss of Pointer) condition has occurred on the physical path TP associated with the specified interface. |
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.40 |
Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.41 |
Indicates that a cooling fan failure condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.42 |
Indicates that an enclosure door open condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.43 |
Indicates that a fuse failure alarm condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.44 |
Indicates that a high temperature condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
ENTITY-MIBentPhysicalContainedIn ENTITY-MIBentPhysicalParentRelPos ENTITY-MIBentPhysicalClass atmfM4HwInstalledSwSwIndex atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.45 |
Indicates that a version mismatch condition
has occurred on the hardware unit associated
with the specified index.
An entPhysicalClass of unknown(2) along with
both an entPhysicalContainedIn of 0 and an
entPhysicalParentRelPos of -1 indicates that
the error occurred in the ATM NE but not in any
one hardware unit maintained in the MIB table.
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.46 |
Indicates that the operational state of the specified VPL termination point has transitioned to 'up'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.47 |
Indicates that the operational state of the specified VPL termination point has transitioned to 'down'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.48 |
Indicates that the operational state of the specified VCL termination point has transitioned to 'up'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.49 |
Indicates that the operational state of the specified VCL termination point has transitioned to 'down'. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.5 |
Indicates that an LOS (Loss of Signal) condition has occurred on the physical path TP associated with the specified interface. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.50 |
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'up'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.51 |
Indicates that the operational state of the specified VPL cross-connection has transitioned to 'down'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.52 |
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'up'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.53 |
Indicates that the operational state of the specified VCL cross-connection has transitioned to 'down'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.54 |
Indicates that the operational state of the specified hardware unit has transitioned to 'up'. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.55 |
Indicates that the operational state of the specified hardware unit has transitioned to 'down'. |
|
IF-MIBifOperStatus atmfM4IfType
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.56 |
Indicates that an ATM cell layer interface has just been created on the interface. |
|
IF-MIBifOperStatus
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.57 |
Indicates that the ATM cell layer interface has just been deleted. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.58 |
Indicates that the VPC termination point has just been created. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.59 |
Indicates that the VPC termination point has just been deleted. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.6 |
Indicates that a payload type mismatch condition has occurred on the physical path TP associated with the specified interface. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.60 |
Indicates that the VCC termination point has just been created. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.61 |
Indicates that the VCC termination point has just been deleted. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.62 |
Indicates that the VPL cross-connection has just been created. When a cross-connection is created along with its VPL endpoints, this trap should be emitted to indicate the creation of the entire group of objects. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.63 |
Indicates that the VPL cross-connection has just been deleted. When a cross-connection is deleted along with its VPL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.64 |
Indicates that the VCL cross-connection has just been created. When a cross-connection is created along with its VCL endpoints, this trap should be emitted to indicate the creation of the entire group of objects. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.65 |
Indicates that the VCL cross-connection has just been deleted. When a cross-connection is deleted along with its VCL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.66 |
Indicates that the specified hardware unit has been installed at the specified location. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.67 |
Indicates that the specified hardware unit has been removed or de-installed from the specified location. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.68 |
Indicates that the specified software package has been installed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.69 |
Indicates that the specified software package has been removed. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.7 |
Indicates that an transmission error condition has occurred on the physical path TP associated with the specified interface. |
|
IF-MIBifOperStatus
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.70 |
Indicates that the configuration of the interface has been changed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.71 |
Indicates that the VPL termination point configuration has been changed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.72 |
Indicates that the VCL termination point configuration has been changed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.73 |
Indicates that the VPL cross-connection configuration has been changed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.74 |
Indicates that the VCL cross-connection configuration has been changed. |
|
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.75 |
Indicates that the specified hardware unit configuration has changed. |
|
HOST-RESOURCES-MIBhrSWInstalledIndex
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.76 |
Indicates that the specified software package configuration has changed. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.8 |
Indicates that path trace mismatch condition has occurred on the physical path TP associated with the specified interface. |
|
IF-MIBifOperStatus atmfM4TrapAlarmSeverity
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.9 |
Indicates that an RDI (Remote Defect Indication) condition has occurred on the physical path TP associated with the specified interface. |