juniAtmOamF4FlowEndToEndRowStatus

Juniper-UNI-ATM-MIB · .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6

Object

column r/w SNMPv2-TCRowStatus

Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
    createAndGo
    destroy
              
To create/delete an entry in this table, the following entry objects
MUST be explicitly configured:
    juniAtmOamF4FlowEndToEndRowStatus
              
F4 OAM end loopback and CC tests are mutually exclusive, enabling one
will disable the other automatically.  So, it is not allowed either at
the circuit creation time or after the circuit creation to issue a
request to enable end-to-end loopback and CC tests simultaneouly.
Enabling/disabling CC sink and source is one time operation.  To
re-enable either CC source and sink in way different to earlier, both
has to be disabled from the previous.

Context

MIB: Juniper-UNI-ATM-MIB
OID: .1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6
Type: column
Access: readwrite
Status: current
Parent: juniAtmOamF4FlowEndToEndCfgEntry
Table: juniAtmOamF4FlowEndToEndCfgTable
Siblings: 5

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
juniAtmOamF4FlowEndToEndIfIndex The ifIndex of the ATM interface to configure the F4 OAM end-to-end flow.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1`
juniAtmOamF4FlowEndToEndVpi Select the VPI for F4 OAM end-to-end flow configuration.	column	Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2`
juniAtmOamF4FlowEndToEndLoopbackTimer Configure the timer for sending the F4 flow end-to-end loopback OAM cells. Setting this value will enable sending the F4 end cells on the circuit. It is not allowed to set the va…	column	seconds Integer32	`.1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3`
juniAtmOamF4FlowEndToEndCCSink Enable/Disable F4 flow end-to-end continuity check sink end point for this VP.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4`
juniAtmOamF4FlowEndToEndCCSource Enable/Disable F4 flow end-to-end continuity check source end point for this VP.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5`