RAPID-CITY-VSP Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
314
Rows
314
Columns
3,479

rcSysAccessPolicyTable

table
.1.3.6.1.4.1.2272.1.1.61 · 1 row entry · 16 columns
Open in standard view 
Management access policy table.  This table is 
used to permit or deny access to this device via
the specified source Id.
rcSysAccessPolicyEntry entry .1.3.6.1.4.1.2272.1.1.61.1
An access policy table entry.
Indexes
rcSysAccessPolicyId
Column Syntax OID
rcSysAccessPolicyId
Policy Id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.1.61.1.1
rcSysAccessPolicyName
Name of this policy.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.1.61.1.2
rcSysAccessPolicyPolicyEnable
Indicate whether this policy is currently
active.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.1.61.1.3
rcSysAccessPolicyMode
Used to indicate whether a packet having a
source IP address that matches this entry
should be permitted to enter the device or
denied access.
Enumerationr/w
Enumerated Values:
1allow
2deny
 .1.3.6.1.4.1.2272.1.1.61.1.4
rcSysAccessPolicyService
Is represented as bitset to indicate which protocol
this entry should be applied to.
Value is one of multiple(logical 'OR')
of the following values:
telnet(1),
snmp(2),
tftp(4),
ftp(8),
…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.1.61.1.5
rcSysAccessPolicyPrecedence
Used to indicate the precedence of this policy.
The Lower the number the higher the precedence.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2272.1.1.61.1.6
rcSysAccessPolicyTrustedHostUserName
User name on the trusted host performing a rlogin
into the device.
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.2272.1.1.61.1.10
rcSysAccessPolicyAccessLevel
Access level of trusted host.
Enumerationr/w
Enumerated Values:
1readOnly
2readWrite
3readWriteAll
 .1.3.6.1.4.1.2272.1.1.61.1.11
rcSysAccessPolicyLog
Used to indicate whether logging should be
performed if this policy was applied.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.1.61.1.12
rcSysAccessPolicyUsage
Usage Counter
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.1.61.1.13
rcSysAccessPolicyRowStatus
Used to create/delete an entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.1.61.1.14
rcSysAccessPolicyAccessStrict
Used to restrict the access level specified in
the system access policy table to exactly the
same access level as specified by user. If TRUE
then only the access level in the policy table
is allowed access. If FALSE, th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.1.61.1.15
rcSysAccessPolicyNetInetAddrType
Source network Inet Address Type.
Enumerationr/w
Enumerated Values:
0any
1ipv4
2ipv6
 .1.3.6.1.4.1.2272.1.1.61.1.16
rcSysAccessPolicyNetInetAddress
Source network Inet Address (prefix/network).
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.1.61.1.17
rcSysAccessPolicyNetInetAddrPrefixLen
Source network Inet Address Prefix-Length/Mask.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.1.61.1.18
rcSysAccessPolicyTrustedHostInetAddress
Trusted Inet address of host performing a rlogin
into the device.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.1.61.1.19

rcSysTrapSenderTable

table
.1.3.6.1.4.1.2272.1.1.62 · 1 row entry · 2 columns
Open in standard view 
The trap sender table (0 to 25 entries).  This
table lists the addresses of Network Management
Stations and the Source Address that should receive 
trap messages from this entity when an exception 
condition occurs.
rcSysTrapSenderEntry entry .1.3.6.1.4.1.2272.1.1.62.1
A trap sender table entry.
Indexes
rcSysTrapSenderRecvAddress
Column Syntax OID
rcSysTrapSenderRecvAddress
IP address for trap receiver.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.1.62.1.1
rcSysTrapSenderSrcAddress
IP address for trap sender.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.1.62.1.2

rcSysDnsServerListTable

table
.1.3.6.1.4.1.2272.1.1.64 · 1 row entry · 7 columns
Open in standard view 
DNS serever list table used to store the 
details of the DNS server configured.
rcSysDnsServerListEntry entry .1.3.6.1.4.1.2272.1.1.64.1
table entry.
Indexes
rcSysDnsServerListType
Column Syntax OID
rcSysDnsServerListType
Type of the DNS server
Enumeration
Enumerated Values:
0primary
1secondary
2tertiary
 .1.3.6.1.4.1.2272.1.1.64.1.1
rcSysDnsServerListStatus
Status of DNS server
Enumeration
Enumerated Values:
0active
1in-active
 .1.3.6.1.4.1.2272.1.1.64.1.3
rcSysDnsServerListRequestCount
Number of request send to this server
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.1.64.1.4
rcSysDnsServerListSuccessCount
Number of request send to this server which
are successful
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.1.64.1.5
rcSysDnsServerListRowStatus
Used to create/delete DNS server entries
in rcSysDnsServerListTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.1.64.1.6
rcSysDnsServerListAddressType
The address type of DNS Server.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.1.64.1.7
rcSysDnsServerListAddress
The address of the DNS Server
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.1.64.1.8

rcSysDnsHostTable

table
.1.3.6.1.4.1.2272.1.1.65 · 1 row entry · 5 columns
Open in standard view 
DNS Host table.
rcSysDnsHostEntry entry .1.3.6.1.4.1.2272.1.1.65.1
table entry.
Indexes
rcSysDnsHostData
Column Syntax OID
rcSysDnsHostData
Host Name or Host IP Address.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.1.65.1.1
rcSysDnsHostName
Host Name.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.1.65.1.2
rcSysDnsHostSource obsolete
DNS Server IP or /etc/host file.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.1.65.1.4
rcSysDnsHostAddressType
Address Type of the Host.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.1.65.1.5
rcSysDnsHostAddress
Address of the Host.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.1.65.1.6

rcSysFrcMsgControlTable

table
.1.3.6.1.4.1.2272.1.1.94 · 1 row entry · 3 columns
Open in standard view 
Management Force-msg Control table. This table is used to
          
specify the pattern for Force-msg Control
rcSysFrcMsgControlEntry entry .1.3.6.1.4.1.2272.1.1.94.1
A Force-msg Control table entry.
Indexes
rcSysFrcMsgControlPatternId
Column Syntax OID
rcSysFrcMsgControlPatternId
Pattern Id.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.1.94.1.1
rcSysFrcMsgControlPattern
Pattern for filtering the force-msg for msg control
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.1.94.1.2
rcSysFrcMsgControlRowStatus
Used to create/delete an entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.1.94.1.3

rcSysAccPolSnmpGrpTable

table
.1.3.6.1.4.1.2272.1.1.95 · 1 row entry · 3 columns
Open in standard view 
SNMP group list for access policy
rcSysAccPolSnmpGrpEntry entry .1.3.6.1.4.1.2272.1.1.95.1
The table entry which covers the groups under snmp service.
Indexes
rcSysAccessPolicyId rcSysAccPolSnmpGrpName rcSysAccPolSnmpGrpModel
Column Syntax OID
rcSysAccPolSnmpGrpName
The snmp-v3 group name
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.1.95.1.1
rcSysAccPolSnmpGrpModel
The snmp model
SNMP-FRAMEWORK-MIBSnmpSecurityModel
Textual Convention: SNMP-FRAMEWORK-MIBSnmpSecurityModel Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2272.1.1.95.1.2
rcSysAccPolSnmpGrpRowStatus
Row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.1.95.1.3

rcVlanTable

table
.1.3.6.1.4.1.2272.1.3.2 · 1 row entry · 31 columns
Open in standard view 
A list of Virtual LAN entries. The number of entries
is given by rcVlanNumVlans.
rcVlanEntry entry .1.3.6.1.4.1.2272.1.3.2.1
Entry containing configuration information for a
particular Virtual LAN.

The relationship between the various port sets in a
VLAN Entry are :

o The set of ports defined by PortMembers must be…
Indexes
rcVlanId
Column Syntax OID
rcVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.3.2.1.1
rcVlanName
An administratively-assigned name for this VLAN.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.3.2.1.2
rcVlanColor
An administratively-assigned color code for this
VLAN. The value of this object is used by the VLAN
Manager GUI tool to select a color when it draws
this VLAN on the screen.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.3.2.1.3
rcVlanIfIndex
When rcVlanRoutingEnable is set to true(1), this
value indicates the 'logical' ifIndex assigned to
this VLAN. Otherwise, this value is meaningless
and should be set to zero.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.3.2.1.6
rcVlanAction
VLAN related actions.
Enumerationr/w
Enumerated Values:
1none
2flushMacFdb
3flushArp
4flushIp
5flushDynMemb
6all
7flushSnoopMemb
8triggerRipUpdate
9flushSnoopMRtr
10flushIpRsmltEdgePeer
 .1.3.6.1.4.1.2272.1.3.2.1.7
rcVlanResult
The result from the last VLAN action.
Enumeration
Enumerated Values:
1none
2inProgress
3success
4fail
 .1.3.6.1.4.1.2272.1.3.2.1.8
rcVlanStgId
Indicates the Spanning Tree Group (STG) used by
this VLAN to determine the state of its ports.
If this VLAN is not associated with any STG, this
value should be set to zero.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.3.2.1.9
rcVlanPortMembers
The set of ports that are members (static or
dynamic) of this VLAN.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.3.2.1.11
rcVlanActiveMembers
The set of ports that are currently active in
this VLAN. Active ports include all static ports
and any dynamic ports where the VLAN policy was
met.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.3.2.1.12
rcVlanStaticMembers
The set of ports that are static members of this
VLAN. A static member of a VLAN is always active
and is never aged out.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.3.2.1.13
rcVlanNotAllowToJoin
The set of ports that are not allowed to become
members of this VLAN.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.3.2.1.14
rcVlanProtocolId
The protocol identifier of this VLAN. This value
is meaningful only if rcVlanType is equal to
byProtocolId(3). For other VLAN types it should
have the value none(0).
Enumerationr/w
Enumerated Values:
0none
1ip
2ipx802dot3
3ipx802dot2
4ipxSnap
5ipxEthernet2
6appleTalk
7decLat
8decOther
9sna802dot2
10snaEthernet2
11netBios
12xns
13vines
14ipV6
15usrDefined
16rarp
17pPPoE
 .1.3.6.1.4.1.2272.1.3.2.1.15
rcVlanSubnetAddr
The IP subnet address of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.3.2.1.16
rcVlanSubnetMask
The IP subnet mask of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.3.2.1.17
rcVlanAgingTime
The timeout period (in seconds) used for aging
out dynamic members of this VLAN. This field is
only relevant for policy-based VLANs.
Integer32r/w
Constraints:
range: 0-0
range: 10-1000000
 .1.3.6.1.4.1.2272.1.3.2.1.18
rcVlanMacAddress
The MAC address assigned to the virtual router
interface of this VLAN. This field is meaningful
only if rcVlanRoutingEnable is equal to true(1).
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.3.2.1.19
rcVlanRowStatus
Used to create/delete entries in the rcVlanTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.3.2.1.20
rcVlanUserDefinedPid
When rcVlanProtocolId is set to usrDefined(15)
in a protocol-based VLAN, this field represents
the 16-bit user defined protocol identifier.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.3.2.1.26
rcVlanProtocolIds
Bitfield of protocol ids.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.3.2.1.28
rcVlanTosValue
Tos value.
Integer32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.3.2.1.34
rcVlanEncap
This is the encapsulation type for userdefined protocol
based vlans. This is not meaningful for other types of
vlan. The default value is null.
Enumerationr/w
Enumerated Values:
1ethernet2
2llc
3snap
4all
5notapplicable
 .1.3.6.1.4.1.2272.1.3.2.1.35
rcVlanFdbAging
The timeout period (in seconds) used for aging
out fdb entries of this VLAN.
Integer32r/w
Constraints:
range: 0-0
range: 10-1000000
 .1.3.6.1.4.1.2272.1.3.2.1.37
rcVlanOspfPassivePortMember
The set of ports in the vlan that are designated as
ospf passive
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.3.2.1.44
rcVlanNlbMode
NLB mode set on a VLAN.
Enumerationr/w
Enumerated Values:
0nlbAdminDisable
1nlbAdminIgmpMcast
2nlbAdminMulticast
4nlbAdminUnicast
 .1.3.6.1.4.1.2272.1.3.2.1.46
rcVlanVrfId
Indicates the Virtual Router to which the VLAN belongs
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.3.2.1.48
rcVlanVrfName
The Name of the Virtual Router to which the VLAN belongs
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.3.2.1.49
rcVlanNodalMepList
List of nodal Meps assigned to this vlan. A mep
consists of Domain Name, Association name and Mep
Id separated by '.'. Each meps is separated by ',':
<md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,...
The maximum number of n…
OctetStringr/w
Constraints:
range: 0-408
 .1.3.6.1.4.1.2272.1.3.2.1.54
rcVlanNumOfNodalMep
Number of nodal meps assigned to this vlan
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.3.2.1.55
rcVlanNodalMipLevelList
List of nodal Mip levels assigned to this vlan that
allows Mip functionality to be enabled on a per level
per vlan basis. A mip level is represented by an
integer ranging from 0 to 7. The mip levels are
separated by ','…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.3.2.1.56
rcVlanNumOfNodalMipLevel
Number of nodal mip levels assigned to this vlan that
allows MIP functionality to be enabled on a per level
per vlan basis.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.3.2.1.57
rcVlanPlsbIsid
Plsb i-sid number assigned to a C-vlan. Default 0 value
indicates that no i-sid has been assinged.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.3.2.1.61

rcVlanPortTable

table
.1.3.6.1.4.1.2272.1.3.3 · 1 row entry · 19 columns
Open in standard view 
A table used to maintain VLAN port related 
information.
rcVlanPortEntry entry .1.3.6.1.4.1.2272.1.3.3.1
Entry containing VLAN information regarding a
particular port.
Indexes
rcVlanPortIndex
Column Syntax OID
rcVlanPortIndex
An unique index used to identify a particular
port in the system. This index is equal to the
ifIndex of the port.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.3.3.1.1
rcVlanPortNumVlanIds
Used to indicate the number of VLAN IDs that
are stored in the rcVlanPortVlanIds variable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.3.3.1.2
rcVlanPortType
The type of port: access(1) or trunk(2).
Enumerationr/w
Enumerated Values:
1access
2trunk
 .1.3.6.1.4.1.2272.1.3.3.1.4
rcVlanPortDiscardTaggedFrames
A flag used to determine how to process tagged
frames received on this access port. When the
flag is set, these frames are discarded by the
forwarding process. When the flag is reset, these
frames are processed normall…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.5
rcVlanPortDiscardUntaggedFrames
A flag used to determine how to process untagged
frames received on this trunk port. When the flag
is set, these frames are discarded by the
forwarding process. When the flag is reset, these
frames are assigned to the…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.6
rcVlanPortDefaultVlanId
The VLAN ID assigned to untagged frames received
on this trunk port.

This field is meaningless when the port is not
a trunk port.
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.3.3.1.7
rcVlanPortPerformTagging
Enable/disable the port on the current vlan to
perform tagging on the incoming and outgoing traffic.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.8
rcVlanPortLoopDetect
Enable/disable loop detection on this port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.10
rcVlanPortFirstPortInOpid
This value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversa
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.3.3.1.11
rcVlanPortLastPortInOpid
This value gives the IfIndex of the first port in the
octapid. This value is used to generate an error message
when changing port type from normal to uni/nni and
viceversa
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.3.3.1.12
rcVlanPortUntagDefaultVlan
enable/disable Egress Tagging on the Default Vlan of the
port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.13
rcVlanPortLoopDetectAction
This value is used to specify the action which needs
to be taken once a loop is detected on a specific port.
VlanBlock is not supported in VSP9000.
Enumerationr/w
Enumerated Values:
1portDown
2vlanBlock
3macDiscard
 .1.3.6.1.4.1.2272.1.3.3.1.14
rcVlanPortArpDetect
Enable/disable Arp detection on this port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.15
rcVlanPortSpoofDetect
Enable/disable spoof detection on this port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.16
rcVlanPortClassificationSubnet
Enable/disable Subnet based Vlan packets on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.18
rcVlanPortClassificationProtocol
Enable/disable Protocol based Vlan packets on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.19
rcVlanPortClassificationPrec
Sets the precedence for vlan classification. A value
of 1 puts classification of packets to source mac vlans
ahead of subnet based vlans. A value of 2 puts subnet
based vlans ahead of source mac vlans. Classification…
Enumerationr/w
Enumerated Values:
1sourceMac
2subnet
 .1.3.6.1.4.1.2272.1.3.3.1.20
rcVlanPortVlanIdList
This bitfield is used to identify which VLANs this port
is assigned to. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vlan Id 1.
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.3.3.1.21
rcVlanPortClassificationSourceMac
Enable/disable SourceMac based Vlan packets on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.3.1.22

rcVlanMacTable

table
.1.3.6.1.4.1.2272.1.3.4 · 1 row entry · 3 columns
Open in standard view 
A table used to maintain MAC addresses assigned 
to a particular VLAN by MAC address.
rcVlanMacEntry entry .1.3.6.1.4.1.2272.1.3.4.1
Entry containing VLAN information regarding a
particular port.
Indexes
rcVlanMacVlanId rcVlanMacAddr
Column Syntax OID
rcVlanMacVlanId
An unique index used to identify a VLAN (by MAC
address) in the system.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.3.4.1.1
rcVlanMacAddr
An unique index used to identify a MAC address
assigned to a particular VLAN.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.3.4.1.2
rcVlanMacRowStatus
Row status for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.3.4.1.3

rcVlanLoopDetectedTable

table
.1.3.6.1.4.1.2272.1.3.10 · 1 row entry · 3 columns
Open in standard view 
A list of Vlans the port belongs to
and the 
corresponding loop detected status.
rcVlanLoopDetectedEntry entry .1.3.6.1.4.1.2272.1.3.10.1
Loop-Detected Entry.
Indexes
rcVlanLoopDetectedPortIndex rcVlanLoopDetectedVlanId
Column Syntax OID
rcVlanLoopDetectedPortIndex
Port Number.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.3.10.1.1
rcVlanLoopDetectedVlanId
Gives the VlanId to which the port belongs.
Integer32
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.3.10.1.2
rcVlanLoopDetectedValue
Gives the Loop Detected status of the port
in a vlan.
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.2272.1.3.10.1.3

rcVlanDsapSsapTable

table
.1.3.6.1.4.1.2272.1.3.11 · 1 row entry · 3 columns
Open in standard view 
A table used to maintain DSAP/SSAP values 
assigned to a sna802dot2 or userdefined vlan.
rcVlanDsapSsapEntry entry .1.3.6.1.4.1.2272.1.3.11.1
An entry in the rcVlanDsapSsap table.
Indexes
rcVlanDsapSsapVlanId rcVlanDsapSsapPid
Column Syntax OID
rcVlanDsapSsapVlanId
A unique index to identify a vlan.
Integer32
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.3.11.1.1
rcVlanDsapSsapPid
Values of DSAP/SSAP assigned to a particular
vlan.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.3.11.1.2
rcVlanDsapSsapRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.3.11.1.3

rcVlanNewLoopDetectedTable

table
.1.3.6.1.4.1.2272.1.3.12 · 1 row entry · 5 columns
Open in standard view 
A list of Vlans the port belongs to and the 
corresponding loop detected status.
rcVlanNewLoopDetectedEntry entry .1.3.6.1.4.1.2272.1.3.12.1
Loop-Detected Entry.
Indexes
rcVlanNewLoopDetectedPortIndex rcVlanNewLoopDetectedVlanId rcVlanNewLoopDetectedMac
Column Syntax OID
rcVlanNewLoopDetectedPortIndex
Port Number.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.3.12.1.1
rcVlanNewLoopDetectedVlanId
Gives the VlanId to which the port belongs.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.3.12.1.2
rcVlanNewLoopDetectedMac
Mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.3.12.1.3
rcVlanNewLoopDetectedAction
This value is used to specify the action which
needs to be taken once a loop is detected on a
specific port.
Enumeration
Enumerated Values:
1portDown
2vlanBlock
3macDiscard
 .1.3.6.1.4.1.2272.1.3.12.1.4
rcVlanNewLoopDetectedSmltRemote
A MAC address indicate for remote learnt,
either local or remote.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.3.12.1.5

rcChasFanZoneTable

table
.1.3.6.1.4.1.2272.1.4.7.2 · 1 row entry · 7 columns
Open in standard view 
Table for the zones available on the chassis
rcChasFanZoneEntry entry .1.3.6.1.4.1.2272.1.4.7.2.1
Contains information regarding a zone unit
Indexes
rcChasFanZoneType
Column Syntax OID
rcChasFanZoneType
Type of the fan zone.
Enumeration
Enumerated Values:
1front
2rear
 .1.3.6.1.4.1.2272.1.4.7.2.1.1
rcChasFanZoneMode
Functional mode of the fan zone.
Enumeration
Enumerated Values:
1normal
2alarm
 .1.3.6.1.4.1.2272.1.4.7.2.1.2
rcChasFanZoneModeStatus
Bit set indicates the alarm type(s)
Bits
Enumerated Values:
0normal
1fanFault
2alarmThresholdExceeded
 .1.3.6.1.4.1.2272.1.4.7.2.1.3
rcChasFanZoneAlarmTimer
Alarm timer indicates the remaining time before
system checks and shutdown module when fan is in
the alarm state. Zero means the fan i snot in an
alarm state
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.4.7.2.1.4
rcChasFanZoneTemperature
Highest temperature measured in celsius degree
from all the sensors (inlet and outlet) in the zone
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.4.7.2.1.5
rcChasFanZoneTray1LedColor
Led color indicate fans operation status on tray
off: Indicates no tray or power off.
green: Indicates all fans are operational in a tray.
red: Front Zone Tray: more than one fans in a tray are not opertional.
…
Enumeration
Enumerated Values:
1off
2green
3red
4amber
 .1.3.6.1.4.1.2272.1.4.7.2.1.6
rcChasFanZoneTray2LedColor
Led color indicate fans operation status on tray
off: Indicates no tray or power off.
green: Indicates all fans are operational in a tray.
red: Front Zone Tray: more than one fans in a tray are not opertional.
…
Enumeration
Enumerated Values:
1off
2green
3red
4amber
 .1.3.6.1.4.1.2272.1.4.7.2.1.7

rcChasFanInfoTable

table
.1.3.6.1.4.1.2272.1.4.7.3 · 1 row entry · 5 columns
Open in standard view 
This table contains information for 
all the fans on the chassis
rcChasFanInfoEntry entry .1.3.6.1.4.1.2272.1.4.7.3.1
Contains information regarding a fan unit
Indexes
rcChasFanZoneType rcChasFanInfoTray rcChasFanInfoFan
Column Syntax OID
rcChasFanInfoTray
Number of trays per zone in chassis
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.4.7.3.1.1
rcChasFanInfoFan
Number of fans per tray
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.4.7.3.1.2
rcChasFanInfoExpectedSpeed
The administrative setting for the fan speed
low: Low speed set by software
medium: Medium speed set by software
high: High speed set by software
hardware: Speed controlled by hardware
Enumeration
Enumerated Values:
1low
2medium
3high
4hardware
 .1.3.6.1.4.1.2272.1.4.7.3.1.3
rcChasFanInfoOperSpeed
Actual speed of the fan
Enumeration
Enumerated Values:
1low
2medium
3high
4hardware
 .1.3.6.1.4.1.2272.1.4.7.3.1.4
rcChasFanInfoStatus
The operational status of the fan. Details below:
ok(1): Fan operating under normal condition(s)
faulty(2): Fan not operating as expected
Enumeration
Enumerated Values:
1ok
2faulty
 .1.3.6.1.4.1.2272.1.4.7.3.1.5

rcChasPowerSupplyTable

table
.1.3.6.1.4.1.2272.1.4.8.1 · 1 row entry · 2 columns
Open in standard view 
This table contains information about power 
supplies.
rcChasPowerSupplyEntry entry .1.3.6.1.4.1.2272.1.4.8.1.1
Contains information regarding a power supply
unit.
Indexes
rcChasPowerSupplyId
Column Syntax OID
rcChasPowerSupplyId
The power supply Id.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.4.8.1.1.1
rcChasPowerSupplyOperStatus
Actual status of the power supply:
- unknown(1) - status can not be determined.
- empty(2) - power supply not installed.
- up(3) - present and supplying power.
- down(4) - present, but failure indicated.
Enumeration
Enumerated Values:
1unknown
2empty
3up
4down
 .1.3.6.1.4.1.2272.1.4.8.1.1.2

rcChasPowerSupplyDetailTable

table
.1.3.6.1.4.1.2272.1.4.8.2 · 1 row entry · 8 columns
Open in standard view 
This table contains detailed information about
power supplies.
rcChasPowerSupplyDetailEntry entry .1.3.6.1.4.1.2272.1.4.8.2.1
Contains detailed info regarding a power supply
unit.
Indexes
rcChasPowerSupplyDetailId
Column Syntax OID
rcChasPowerSupplyDetailId
The power supply Id.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.4.8.2.1.1
rcChasPowerSupplyDetailType
The power supply type.
Enumeration
Enumerated Values:
0unknown
1ac
2dc
 .1.3.6.1.4.1.2272.1.4.8.2.1.2
rcChasPowerSupplyDetailSerialNumber
The power supply serial number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.4.8.2.1.3
rcChasPowerSupplyDetailHardwareRevision
The hardware revision of the power supply.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.4.8.2.1.4
rcChasPowerSupplyDetailPartNumber
The power supply part number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.4.8.2.1.5
rcChasPowerSupplyDetailDescription
The detail description of power supply.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.4.8.2.1.6
rcChasPowerSupplyDetailInputLineVoltage
The power supply Input Line voltage.
Enumeration
Enumerated Values:
0unknown
1low110v
2high220v
3minus48v
 .1.3.6.1.4.1.2272.1.4.8.2.1.8
rcChasPowerSupplyDetailOutputWatts
The output power of this power supply
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.4.8.2.1.10

rcCardTable

table
.1.3.6.1.4.1.2272.1.4.9.1 · 1 row entry · 19 columns
Open in standard view 
A table that contains information about the 
cards in this chassis.  For those slots that 
do not contain a physical card, the table may 
 be implemented to contain a conceptual row 
with the type of physical module set to 
 'chasCardEmpty', or it may be implemented to 
 have no conceptual row instance.
rcCardEntry entry .1.3.6.1.4.1.2272.1.4.9.1.1
Card attributes
Indexes
rcCardIndex
Column Syntax OID
rcCardIndex
A unique value for each module within the chassis.
This value is determined by the chassis slot number
where the module is inserted. Valid entries are 1
to the value of rcChasNumSlots
Integer32
Constraints:
range: 1-26
 .1.3.6.1.4.1.2272.1.4.9.1.1.1
rcCardType
Used to indicate the card type. The value returned
is defined by the description in rc2kCardTable.
Enumeration
Enumerated Values:
1other
1073873665cbCP-CSC
1075708672cbSF3200
1075712768cbSF9600
1075970864cb48x1000BaseTX
1075974960cb48x1000BaseTXPOE
1077044016cb48x1000SFP
1077109528cb24x10GBaseSFP
1077109552cb48x10GBaseSFP
1084097280cbACPowerSupply
1085145856cbCPFanTray
1085149952cbIOFanTray
1090388736cbMidplane-28
1091437312cbAUX
 .1.3.6.1.4.1.2272.1.4.9.1.1.2
rcCardOxateCpld
Oxate CPLD version for CP card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.9
rcCardOxideFpga
Oxide FGPA version for CP card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.10
rcCardCatskillFpga
Catskill FPGA version for CP card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.11
rcCardQE
QE version for CP card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.12
rcCardK2Fpga
K2 FPGA version for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.13
rcCardIoDateDC
IO Date DC CPLD for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.14
rcCardIoDateBB
IO Date BaseBoard CPLD for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.15
rcCardIoPimCpld
IO PIM CPLD for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.16
rcCardLed0Cpld
LED0 CPLD for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.17
rcCardLed1Cpld
LED1 CPLD for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.18
rcCardZagrosFpga
Zagros FPGA for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.19
rcCardRsp
RSP for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.20
rcCardBcmMac
BCM Mac for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.21
rcCardPhosphideFpga
Phosphide FPGA for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.22
rcCardSulfideFpga
Sulfide FPGA for IO card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.23
rcCardFluorateCpld
Fluorate Cpld for SF card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.24
rcCardBme
BME for SF card
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.4.9.1.1.25

rcPortTable

table
.1.3.6.1.4.1.2272.1.4.10.1 · 1 row entry · 41 columns
Open in standard view 
Port table
rcPortEntry entry .1.3.6.1.4.1.2272.1.4.10.1.1
Entry containing info. for a particular port
Indexes
rcPortIndex
Column Syntax OID
rcPortIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.4.10.1.1.1
rcPortType
Port type
Enumeration
Enumerated Values:
0other
1rc100BaseTX
2rc100BaseT2
3rc100BaseF
4rc1000BaseF
5rc1000BaseDualF
6rc10BaseF
7rcPosMMF
8rcPosSMF
9rcAtm
10rcGbicLx
11rcGbicSx
12rcGbicXd
13rcGbicCu
14rcGbicOther
15rcOc3cSM
16rcOc3cMM
17rcOc3cCOPPER
18rcOc12cSM
19rcOc12cMM
20rcDs3
21rcE3
22rcGbicNone
23rc1000BaseT
24rcGbicZx
25rcOc3cAtmSM
26rcOc3cAtmMM
27rcOc12cAtmSM
28rcOc12cAtmMM
29rcOc3cPosSM
30rcOc3cPosMM
31rcOc12cPosSM
32rcOc12cPosMM
33rcGbic1470
34rcGbic1490
35rcGbic1510
36rcGbic1530
37rcGbic1550
38rcGbic1570
39rcGbic1590
40rcGbic1610
41rcRmon
42rcGbic1470APD
43rcGbic1490APD
44rcGbic1510APD
45rcGbic1530APD
46rcGbic1550APD
47rcGbic1570APD
48rcGbic1590APD
49rcGbic1610APD
50rc10GbLW
51rc10GbLR
53rc1000BaseTX
55rcGbicBx
56rc10GbNone
58rc10GbSR
59rc10GbSW
60rc10GbER
61rc10GbEW
62rc10GbOther
63rc1000BaseTXPOE
64rc10GbZR
65rc10GbZW
66rcGbic1310Xd
67rcGbic1470Xd
68rcGbic1490Xd
69rcGbic1510Xd
70rcGbic1530Xd
71rcGbic1550Xd
72rcGbic1570Xd
73rcGbic1590Xd
74rcGbic1610Xd
75rcGbic1470Zx
76rcGbic1490Zx
77rcGbic1510Zx
78rcGbic1530Zx
79rcGbic1550Zx
80rcGbic1570Zx
81rcGbic1590Zx
82rcGbic1610Zx
83rcGbic1690Zx
84rcGbic1310Bx
85rcGbic1490Bx
86rcGbicEx
87rcGbic850Sx
88rcGbic1200Lx
89rcGbic1300Lx
90rcGbic1310Lx
91rcGbic1490Lx
92rcGbic1550Lx
93rcGbic1550Ex
94rc1GbFD
95rc10GbLRM
96rc10GbDWDMR
97rc10GbDWDMW
98rc100BaseSX
99rc100BaseLX
100rc100BaseFX
101rc100BaseBX
102rc100BaseZX
103rcGbicMTRJ
104rcGbic1300SeFx
105rcGbicCx
106rc10GbCX
 .1.3.6.1.4.1.2272.1.4.10.1.1.2
rcPortAction
Port related actions.
Enumerationr/w
Enumerated Values:
1none
2flushMacFdb
3flushArp
4flushIp
5flushAll
6triggerRipUpdate
7clearLoopDetectAlarm
 .1.3.6.1.4.1.2272.1.4.10.1.1.6
rcPortResult
Result from the last Vlan action.
Enumeration
Enumerated Values:
1none
2inProgress
3success
4fail
 .1.3.6.1.4.1.2272.1.4.10.1.1.7
rcPortAutoNegotiate
Indicate whether this port enabled for auto
negotiations or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.11
rcPortAdminDuplex
Indicates the port duplex type
Enumerationr/w
Enumerated Values:
1half
2full
 .1.3.6.1.4.1.2272.1.4.10.1.1.12
rcPortOperDuplex
Indicate this port's current duplex value.
Enumeration
Enumerated Values:
1half
2full
 .1.3.6.1.4.1.2272.1.4.10.1.1.13
rcPortAdminSpeed
Indicate this port's speed.
Enumerationr/w
Enumerated Values:
0none
1mbps10
2mbps100
3mbps1000
4mbps10000
 .1.3.6.1.4.1.2272.1.4.10.1.1.14
rcPortOperSpeed
Indicate this port's current speed value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.4.10.1.1.15
rcPortMltId
Indicate which multi-link trunk (MLT) this port
is assigned to. If this port is not associated
with any MLT, this value will be set to zero(0).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.4.10.1.1.16
rcPortLocked
Indicate whether this port is locked.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.17
rcPortAutoNegotiationSupported
Indicate whether this port can support
auto-negotiation.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.18
rcPortSingleRoutablePort
Indicate whether this port is a single routable
port. If this value is true, the port functions
like a traditional router port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.19
rcPortUnknownMacDiscard
If rcUnknownMacDiscard is set to True,
then a packet with an unknown source MAC address
is dropped on that port, and other ports then
will discard any packets with this MAC address
in the destination field.
For examp…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.20
rcPortNumStateTransition
# state transitions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.4.10.1.1.21
rcPortQosLevel
Used to specify the Qos level packets, carried on this
port, should be processed with.
Enumerationr/w
Enumerated Values:
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
 .1.3.6.1.4.1.2272.1.4.10.1.1.30
rcPortDiffServEnable
Used to enable/disable the Differentiated Service
feature on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.31
rcPortDiffServType
Used to specify the Differentiated Service type
for this port.
Enumerationr/w
Enumerated Values:
0none
1access
2core
 .1.3.6.1.4.1.2272.1.4.10.1.1.32
rcPortVendorDescr
Used to show the name of the vendor of this port's
connector. Only applicable to ports on a GBIC cards.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2272.1.4.10.1.1.34
rcPortName
This port's name.
OctetStringr/w
Constraints:
range: 0-42
 .1.3.6.1.4.1.2272.1.4.10.1.1.35
rcPortAdminRouting
Indicate whether the port is routable.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.4.10.1.1.43
rcPortOperRouting
The status of the port whether is routable.
EnableValue
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.4.10.1.1.44
rcPortIeee8021POverrideEnable
Used to enable/disable IEEE 802.1P override.
If it is enabled, 802.1p value from a tagged
frame may not be honored.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.46
rcPortHighSecureEnable
Enable/Disable high secure feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.51
rcPortMrouteStrLimit
maximum number of multicast streams that are
allowed to ingress to CPU through this port.
Integer32r/w
Constraints:
range: 1-32768
 .1.3.6.1.4.1.2272.1.4.10.1.1.55
rcPortMrouteStrTimerCheck
sampling period to check number of multicast
streams that has ingressed CPU through this
port in seconds.
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.2272.1.4.10.1.1.56
rcPortMrouteStrLimitEnable
enable or disable mroute stream limit on port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.57
rcPortAutoNegAd
This object is used to specify the port speed
and duplex abilities to be advertised during
link negotiation.

bit 0 - 10 half duplex advertised
bit 1 - 10 full duplex advertised
bit 2 - 100 half duplex adv…
Bitsr/w
Enumerated Values:
0advertise10Half
1advertise10Full
2advertise100Half
3advertise100Full
5advertise1000Full
6advertiseMacPause
7advertiseAsymPause
8advertiseNone
 .1.3.6.1.4.1.2272.1.4.10.1.1.62
rcPortAutoRecoverPort
enable or disable auto recovery of port from action
taken by cp-limit, link flap or loop detect features
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.64
rcPortEgressRateLimit
Egress Rate Limit. for VSP 9000, range is
10000 to 10000000
Integer32r/w
Constraints:
range: 0-0
range: 10000-10000000
 .1.3.6.1.4.1.2272.1.4.10.1.1.67
rcPortEgressRateLimitState
Used to enable/disable shape/egress-rate-limit
functionality.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.4.10.1.1.68
rcPortIngressRateLimit
Limits the amount of traffic from this Ingress port.
Integer32r/w
Constraints:
range: 1000-10000000
 .1.3.6.1.4.1.2272.1.4.10.1.1.85
rcPortVrfIdList
The set of VRF ids to which this port belongs.
OctetString
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.4.10.1.1.87
rcPortVrfNameList
The set of VRF names to which this port belongs.
OctetString .1.3.6.1.4.1.2272.1.4.10.1.1.96
rcPortBrouterVrfId
Gives the VRF Id for this Brouter port.
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.4.10.1.1.97
rcPortBrouterVrfName
Gives the VRF Name for this Brouter port.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.4.10.1.1.98
rcPortVrfCount
The total number of VRFs this port is associated to.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.4.10.1.1.99
rcPortIngressRatePeak
Peak rate limit for this port. 0 means disable
Integer32r/w
Constraints:
range: 0-0
range: 64-10000000
 .1.3.6.1.4.1.2272.1.4.10.1.1.108
rcPortIngressRateSvc
Service rate limit for this port. 0 mean deisable
Integer32r/w
Constraints:
range: 0-0
range: 64-10000000
 .1.3.6.1.4.1.2272.1.4.10.1.1.109
rcPortCpLimitPktRate
Used to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.
Integer32r/w
Constraints:
range: 1000-20000
 .1.3.6.1.4.1.2272.1.4.10.1.1.110
rcPortCpLimitShutDownEnable
Used to indicate if the port should be shutdown
when the CpLimitPktRate is exceeded.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.1.1.111

rcPortPcapTable

table
.1.3.6.1.4.1.2272.1.4.10.2 · 1 row entry · 3 columns
Open in standard view 
Port pcap Table
rcPortPcapEntry entry .1.3.6.1.4.1.2272.1.4.10.2.1
Entry containing pcap info. for a particular port
Indexes
rcPortPcapIndex
Column Syntax OID
rcPortPcapIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.4.10.2.1.1
rcPortPcapEnable
To enable pcap for the port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.2.1.2
rcPortPcapMode
Mode in which pcap is enabled
Enumerationr/w
Enumerated Values:
1tx
2rx
3both
 .1.3.6.1.4.1.2272.1.4.10.2.1.3

rcPortLacpTable

table
.1.3.6.1.4.1.2272.1.4.10.4 · 1 row entry · 10 columns
Open in standard view 
Port LACP table
rcPortLacpEntry entry .1.3.6.1.4.1.2272.1.4.10.4.1
Entry containing info. for a particular port
Indexes
rcPortIndex
Column Syntax OID
rcPortLacpAdminEnable
Administratively enable/disable LACP on a port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.4.1.1
rcPortLacpOperEnable
Indicates if LACP is operationally enabled or disabled
on a port
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.4.1.2
rcPortLacpFastPeriodicTime
The number of miliseconds between periodic transmissions
using Short Timeouts.
Integer32r/w
Constraints:
range: 200-20000
 .1.3.6.1.4.1.2272.1.4.10.4.1.3
rcPortLacpSlowPeriodicTime
The number of miliseconds between periodic transmissions
using LONG Timeouts.
Integer32r/w
Constraints:
range: 10000-30000
 .1.3.6.1.4.1.2272.1.4.10.4.1.4
rcPortLacpTimeoutScale
Scalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScale
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.4.10.4.1.5
rcPortLacpAggrWaitTime
The number of mili seconds to delay aggregation to
allow multiple links to aggregate simultaneously.
Integer32r/w
Constraints:
range: 200-2000
 .1.3.6.1.4.1.2272.1.4.10.4.1.6
rcPortLacpFastPeriodicTimeOper
The operating value of fast periodic timer on the port.
Integer32
Constraints:
range: 200-20000
 .1.3.6.1.4.1.2272.1.4.10.4.1.7
rcPortLacpSlowPeriodicTimeOper
The operating value of slow periodic timer on the port.
Integer32
Constraints:
range: 10000-30000
 .1.3.6.1.4.1.2272.1.4.10.4.1.8
rcPortLacpTimeoutScaleOper
The operating value of timeout scale on the port.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.4.10.4.1.9
rcPortLacpAggrWaitTimeOper
The operating value of aggreagate wait time on port.
Integer32
Constraints:
range: 200-2000
 .1.3.6.1.4.1.2272.1.4.10.4.1.10

rcPortVLacpTable

table
.1.3.6.1.4.1.2272.1.4.10.5 · 1 row entry · 9 columns
Open in standard view 
Port Virtual LACP table
rcPortVLacpEntry entry .1.3.6.1.4.1.2272.1.4.10.5.1
Entry containing info. for a particular port
Indexes
rcPortIndex
Column Syntax OID
rcPortVLacpAdminEnable
Administratively enable/disable Virtual LACP on a port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.5.1.1
rcPortVLacpOperEnable
Indicates if Virtual LACP is operationally enabled or
disabled on a port
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.5.1.2
rcPortVLacpFastPeriodicTimer
The number of miliseconds between periodic transmissions
using Short Timeouts
Integer32r/w
Constraints:
range: 100-20000
 .1.3.6.1.4.1.2272.1.4.10.5.1.3
rcPortVLacpSlowPeriodicTimer
The number of miliseconds between periodic transmissions
using LONG Timeouts.
Integer32r/w
Constraints:
range: 10000-30000
 .1.3.6.1.4.1.2272.1.4.10.5.1.4
rcPortVLacpTimeout
Timeout control value. Long or Short Timeout
Enumerationr/w
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.2272.1.4.10.5.1.5
rcPortVLacpTimeoutScale
Scalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScale
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.4.10.5.1.6
rcPortVLacpEtherType
VLACP Protocol Identification. The id value is
in Hex. Range in hex (0x600..0xffff)
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.2272.1.4.10.5.1.7
rcPortVLacpEtherMacAddress
Multicast Mac Address exclusively used for VLACPDU's
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.4.10.5.1.8
rcPortVLacpPortState
Display the Vlacp Port State.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.4.10.5.1.9

rcPortRemoteMirroringTable

table
.1.3.6.1.4.1.2272.1.4.10.6 · 1 row entry · 9 columns
Open in standard view 
Port Remote Mirroring Table
rcPortRemoteMirroringEntry entry .1.3.6.1.4.1.2272.1.4.10.6.1
Entry containing remote mirroring info. for a
particular port
Indexes
rcPortRemoteMirroringIndex
Column Syntax OID
rcPortRemoteMirroringIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.4.10.6.1.1
rcPortRemoteMirroringEnable
To enable remote Mirroring for the port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.6.1.2
rcPortRemoteMirroringMode
Mode in which remote mirroring is enabled
Enumerationr/w
Enumerated Values:
1source
2termination
 .1.3.6.1.4.1.2272.1.4.10.6.1.3
rcPortRemoteMirroringSrcMac
Source Mac of the remote mirrored packet.
Remote mirroring packet will be send with
this source mac address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.4.10.6.1.4
rcPortRemoteMirroringDstMac
Destination Mac of the remote mirrored packet.
Packets will be bridged to this mac address.
Remote mirroring packet will be send to this
mac address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.4.10.6.1.5
rcPortRemoteMirroringEtherType
Ethertype of the remote mirrored packet. Packets
will be send with this ethertype
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.4.10.6.1.6
rcPortRemoteMirroringVlanIdListSize
Used to indicate the number of VLAN IDs
that are assigned to this port.
Integer32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.2272.1.4.10.6.1.7
rcPortRemoteMirroringVlanIdList
This field is used only if the port is assigned as
remote mirroring termination port. Represents zero
or more filter lists vlan in which the Destination
Mac address resides. Each VLAN ID is stored as
two bytes in th…
OctetStringr/w
Constraints:
range: 4096-4096
 .1.3.6.1.4.1.2272.1.4.10.6.1.8
rcPortRemoteMirroringRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.4.10.6.1.9

rcPortLosslessEnetTable

table
.1.3.6.1.4.1.2272.1.4.10.13 · 1 row entry · 4 columns
Open in standard view 
Port Lossless Ethernet Table
rcPortLosslessEnetEntry entry .1.3.6.1.4.1.2272.1.4.10.13.1
Entry containing lossless Ethernet information
for a particular port.
Indexes
rcPortLosslessEnetIndex
Column Syntax OID
rcPortLosslessEnetIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
Lossless Ethernet will be limited to 10Gig
ports.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.4.10.13.1.1
rcPortLosslessEnetConfigured
To enable lossless mode for the port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.4.10.13.1.2
rcPortLosslessEnetPauseType
Pause frame type. fc - Pause,
pfc - priority-based flow control.
Enumerationr/w
Enumerated Values:
1fc
2pfc
 .1.3.6.1.4.1.2272.1.4.10.13.1.3
rcPortLosslessEnetPfcBandwidth
Guaranteed bandwidth in Gbps when
rcPortLosslessEnetPauseType is set to pfc(2).
Integer32r/w
Constraints:
range: 2-8
 .1.3.6.1.4.1.2272.1.4.10.13.1.4

rcIpConfTable

table
.1.3.6.1.4.1.2272.1.8.1.1 · 1 row entry · 24 columns
Open in standard view 
A table used to maintain IP routing information 
for a particular interface.
rcIpConfEntry entry .1.3.6.1.4.1.2272.1.8.1.1.1
Entry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.
Indexes
rcIpConfIfIndex
Column Syntax OID
rcIpConfIfIndex
An unique value to identify a physical interface
or a logical interface (VLAN).
Integer32
Constraints:
range: 0-6142
 .1.3.6.1.4.1.2272.1.8.1.1.1.1
rcIpConfAdvertDefRte
Used to indicate whether this interface should
advertize a RIP default route.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.2
rcIpConfAcceptDefRte
Used to indicate whether this interface should
accept a RIP default route.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.3
rcIpConfRowStatus
Row status for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.1.1.1.4
rcIpConfRipEnable
Enable or disable RIP routing on the specified
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.5
rcIpConfOspfEnable
Enable or disable OSPF routing on the specified
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.6
rcIpConfIgmpEnable
Enable or disable IGMP on the specified
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.7
rcIpConfAddrAssigned
Indicate whether IpAddress has been assigned
for this interface.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.8
rcIpConfDhcpEnable
Enable or disable DHCP on the specified
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.9
rcIpConfTriggeredUpdateEnable
Used to indicate whether the RIP triggered update
feature should be enabled on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.10
rcIpConfAutoAggrerateEnable
Used to indicate whether the auto aggregation
feature should be enabled on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.11
rcIpConfGenerateDefaultRoute
Used to indicate whether to generate a default
RIP route on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.12
rcIpConfAdvertiseWhenDown
The value is used indicated whether vlan state change
should be notified to layer 3 or not, provided the vlan
is configured as routable interface. Also used for
single routable ports, in that case the criteria for
state…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.13
rcIpConfDirectBroadcastEnable
Used to indicate whether this interface should
forward direct broadcast traffic
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.14
rcIpConfRipInPolicy
Used to indicate whether this interface should
advertize a RIP default route.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.1.1.1.15
rcIpConfRipOutPolicy
Used to indicate whether this interface should
accept a RIP default route.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.1.1.1.16
rcIpConfOspfIfType
OSPF Interface Type.
Enumerationr/w
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
99passive
 .1.3.6.1.4.1.2272.1.8.1.1.1.17
rcIpConfRipCost
Used to indicate the rip cost for this interface.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2272.1.8.1.1.1.18
rcIpConfRipHolddown
Used to indicate the rip holddown timer for this
interface
Integer32r/w
Constraints:
range: 0-360
 .1.3.6.1.4.1.2272.1.8.1.1.1.19
rcIpConfRipTimeout
Used to indicate the rip timeout interval for this
interface
Integer32r/w
Constraints:
range: 15-259200
 .1.3.6.1.4.1.2272.1.8.1.1.1.20
rcIpConfRsmltEnable
Used to enable Route Smlt feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.21
rcIpConfReversePathCheckEnable
Used to indicate whether this interface should
perform Reverse Path Check
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.22
rcIpConfReversePathCheckMode
Reverse Path Checking mode.
Enumerationr/w
Enumerated Values:
1exist-only
2strict
 .1.3.6.1.4.1.2272.1.8.1.1.1.23
rcIpConfIpVpnLiteEnable
Enable or disable ipvpn-lite capability on the specified
circuitless ip interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.1.1.26

rcIpConfOspfTable

table
.1.3.6.1.4.1.2272.1.8.1.2 · 1 row entry · 11 columns
Open in standard view 
A table used to maintain OSPF information
for a particular interface.
rcIpConfOspfEntry entry .1.3.6.1.4.1.2272.1.8.1.2.1
Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.
Indexes
rcIpConfOspfIfIndex
Column Syntax OID
rcIpConfOspfIfIndex
An unique value to identify a physical interface
or a logical interface (VLAN).
Integer32
Constraints:
range: 0-6142
 .1.3.6.1.4.1.2272.1.8.1.2.1.1
rcIpConfOspfRtrPriority
The priority of this interface. Used in multi-
access networks, this field is used in the
designated router election algorithm. The value 0
signifies that the router is not eligible to become
the designated router on …
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.1.2.1.2
rcIpConfOspfMetric
The metric for this type of service (TOS) on this
interface. The default value of the TOS 0 Metric
is (10^9 / ifSpeed). The value FFFF means 'no route
via this TOS'. A value of 0 means the interface speed
(rcIpConfO…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.1.2.1.3
rcIpConfOspfAuthKey
The Authentication Key. If the Area's
Authorization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.

Note that unauthenticated i…
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.8.1.2.1.4
rcIpConfOspfRowStatus
Row status for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.1.2.1.5
rcIpConfOspfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.1.2.1.6
rcIpConfOspfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for all routers at…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.1.2.1.7
rcIpConfOspfIfAreaId
A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.1.2.1.8
rcIpConfOspfAuthType
The authentication type specified for an interface.
Additional authentication types may be assigned locally.
Enumerationr/w
Enumerated Values:
0none
1simplePassword
2md5
 .1.3.6.1.4.1.2272.1.8.1.2.1.9
rcIpConfOspfPollInterval
OSPF NBMA Interface Poll Interval.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.1.2.1.10
rcIpConfOspfIfMtuIgnore
Mtu-ignore flag is for ignoring the mtu checking in
ospf bdb
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.1.2.1.11

rcIpConfOspfAreaTable

table
.1.3.6.1.4.1.2272.1.8.1.7 · 1 row entry · 3 columns
Open in standard view 
A table used to maintain OSPF information
for a particular Area.
rcIpConfOspfAreaEntry entry .1.3.6.1.4.1.2272.1.8.1.7.1
Entry containing OSPF Area configuration
information. An entry is automatically created
in this table when an area is configured through
ospfAreaTable in (rfc1253rcc.mib).
Indexes
rcIpConfOspfAreaId
Column Syntax OID
rcIpConfOspfAreaId
An unique value to identify an area. Area ID
0.0.0.0 is used for the OSPF backbone.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.1.7.1.1
rcIpConfOspfAreaImportSummary
The area's support for importing Summary
advertisements into a stub area. This field
should be used only if ospfImportASExtern is
set to FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.1.7.1.2
rcIpConfOspfAreaActiveIfCount
This variable displays the number of active
interfaces configured in this area. An area
cannot be deleted if this value is > 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.1.7.1.3

rcIpConfOspfAreaAggregateTable

table
.1.3.6.1.4.1.2272.1.8.1.10 · 1 row entry · 6 columns
Open in standard view 
A table used to maintain OSPF summary route
metric parameter for a particular Area range.
rcIpConfOspfAreaAggregateEntry entry .1.3.6.1.4.1.2272.1.8.1.10.1
Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib
Indexes
rcIpConfOspfAreaAggregateAreaID rcIpConfOspfAreaAggregateLsdbType rcIpConfOspfAreaAggregateNet rcIpConfOspfAreaAggregateMask
Column Syntax OID
rcIpConfOspfAreaAggregateAreaID
The Area the Address Aggregate is to be found
within.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.1.10.1.1
rcIpConfOspfAreaAggregateLsdbType
The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.
Enumeration
Enumerated Values:
3summaryLink
7nssaExternalLink
 .1.3.6.1.4.1.2272.1.8.1.10.1.2
rcIpConfOspfAreaAggregateNet
The IP Address of the Net or Subnet indicated
by the range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.1.10.1.3
rcIpConfOspfAreaAggregateMask
The Subnet Mask that pertains to the Net or
Subnet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.1.10.1.4
rcIpConfOspfAreaAggregateAdvertiseMetric
Used to specify a metric for a Summary LSA (type
3) generated by OSPF through an area range.
If this metric is set to 0, OSPF uses the cost
to the farthest point in the networks being
summarized as the metric.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.1.10.1.5
rcIpConfOspfAreaAggregateEffect
Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.
Enumerationr/w
Enumerated Values:
1advertiseMatching
2doNotAdvertiseMatching
3advertiseDoNotAggregate
 .1.3.6.1.4.1.2272.1.8.1.10.1.6

rcIpConfRsmltTable

table
.1.3.6.1.4.1.2272.1.8.1.11 · 1 row entry · 4 columns
Open in standard view 
A table used to maintain OSPF summary route
metric parameter for a particular Area range.
rcIpConfRsmltEntry entry .1.3.6.1.4.1.2272.1.8.1.11.1
Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib
Indexes
rcIpConfRsmltIfIndex
Column Syntax OID
rcIpConfRsmltIfIndex
Interface Index, this is an index of the table.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.1.11.1.1
rcIpConfRsmltHoldDownTimer
Timer value, the range of value is from 0 to 3600.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.1.11.1.2
rcIpConfRsmltHoldUpTimer
The range of value 0 to 3600 or 9999. 9999 means
infinity.
Integer32r/w
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.1.11.1.3
rcIpConfRsmltRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.1.11.1.4

rcIpAddrTable

table
.1.3.6.1.4.1.2272.1.8.2 · 1 row entry · 11 columns
Open in standard view 
The table of addressing information relevant to
this entity's IP addresses.
          
This table is identical to the ipAddrTable in 
MIB2 except the columns rcIpAdEntIfIndex and 
rcIpAdEntAddr are reversed.  Also, the table 
is indexed by both these variables.
rcIpAddrEntry entry .1.3.6.1.4.1.2272.1.8.2.1
The addressing information for one of this
entity's IP addresses.
Indexes
rcIpAdEntIfIndex rcIpAdEntAddr
Column Syntax OID
rcIpAdEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.2.1.1
rcIpAdEntAddr
The IP address to which this entry's addressing
information pertains.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.2.1.2
rcIpAdEntNetMask
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.2.1.3
rcIpAdEntBcastAddrFormat
The IP broadcast address format used on this
interface.
Enumeration
Enumerated Values:
0zeros
1ones
 .1.3.6.1.4.1.2272.1.8.2.1.4
rcIpAdEntReasmMaxSize
The size of the largest IP datagram which this
entity can re-assemble from incoming IP fragmented
datagrams received on this interface.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.2.1.5
rcIpAdEntRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.2.1.6
rcIpAdEntVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
Integer32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2272.1.8.2.1.7
rcIpAdEntBrouterPort
Used to indicate whether this entry correponds
to a brouter port (as oppose to a routable VLAN).
This value cannot be changed after the row is
created.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.2.1.8
rcIpAdEntMacOffset
Used to translate the ip address into mac address.
The system has 512 mac addresses of which 0-507 are reserved for
Boardwalk box. 508-511 is reserved for MG. One can either
mention a mac offset while configuring an ip…
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2272.1.8.2.1.9
rcIpAdEntIfType
The address entry IfType indicates the type of the
interface. In the case of circuit-less-IP there is
no association with any ports. In other words, it can
be thought of as a virtual interface. The value
'brouter …
Enumeration
Enumerated Values:
1circuitLessIP
2brouterPort
3vlan
 .1.3.6.1.4.1.2272.1.8.2.1.10
rcIpAdEntVrfId
The VrfId used in this table is to associate VLANs
or Brouter ports to a VRF after the creation of VLANs
or Brouter ports.
VRFID 0 is reserved for the Administrative VRF.
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.2.1.12

rcIpFlowTable

table
.1.3.6.1.4.1.2272.1.8.3 · 1 row entry · 6 columns
Open in standard view 
IpFlow Table.  This table contain entries that
correspond to RSVP records in the switching
fabric Address Resolution table.
          
A connection that has a matching entry in this 
table will be processed with a higher priority 
than connections that do not have an entry.
rcIpFlowEntry entry .1.3.6.1.4.1.2272.1.8.3.1
Proprietary flow control variables.
Indexes
rcIpFlowSrcIpAddress rcIpFlowSrcIpPort rcIpFlowDstIpAddress rcIpFlowDstIpPort rcIpFlowProtocol
Column Syntax OID
rcIpFlowSrcIpAddress
The source IP address of an IP packet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.3.1.1
rcIpFlowSrcIpPort
The source port of an IP packet. A zero value
in this field is used as a wildcard value.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.3.1.2
rcIpFlowDstIpAddress
The destination IP address of an IP packet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.3.1.3
rcIpFlowDstIpPort
The destination port of an IP packet. A zero
value in this field is used as a wildcard value.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.3.1.4
rcIpFlowProtocol
The protocol type of an IP packet. A zero value
in this field is used as a wildcard value.
Enumeration
Enumerated Values:
4ip
6tcp
17udp
 .1.3.6.1.4.1.2272.1.8.3.1.5
rcIpFlowRowStatus
Status of entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.3.1.6

rcIpRouteTable

table
.1.3.6.1.4.1.2272.1.8.7 · 1 row entry · 14 columns
Open in standard view 
This entity's IP Routing table.
rcIpRouteEntry entry .1.3.6.1.4.1.2272.1.8.7.1
A route to a particular destination.
Indexes
rcIpRouteDest rcIpRouteMask rcIpRouteNextHop rcIpRouteAltSequence
Column Syntax OID
rcIpRouteDest
The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is depende…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.7.1.1
rcIpRouteMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the va…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.7.1.2
rcIpRouteNextHop
The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface).
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.7.1.3
rcIpRouteMetric
The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.7.1.4
rcIpRouteIfIndex
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.7.1.5
rcIpRouteType
The type of route.
Enumeration
Enumerated Values:
1other
3direct
4indirect
 .1.3.6.1.4.1.2272.1.8.7.1.6
rcIpRouteProto
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols.
Enumeration
Enumerated Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9is-is
10es-is
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15vOspf
16vBgp
17vRip
 .1.3.6.1.4.1.2272.1.8.7.1.7
rcIpRouteAge
The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was l…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.7.1.8
rcIpRouteRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.7.1.9
rcIpRoutePref Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.7.1.10
rcIpRouteAltSequence
Alternative Route Sequence. 0 denotes Best Route.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.7.1.11
rcIpRoutePathType
The type of route. It is a combination of
direct, indirect, best, alternative and ECMP path.
Enumeration
Enumerated Values:
0iA
1iAE
2iB
3iBE
6dB
8iAN
9iAEN
10iBN
11iBEN
14dBN
16iAU
17iAEU
18iBU
19iBEU
22dBU
34iBF
35iBEF
66iBV
67iBEV
74iBVN
75iBEVN
128iAS
129iASE
130iBS
131iBSE
138iBSN
139iBSEN
192iASV
193iASVE
194iBSV
195iBSVE
 .1.3.6.1.4.1.2272.1.8.7.1.12
rcIpRouteSrcVrfId
srcVrfId of the next-hop address
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.7.1.13
rcIpRouteNextHopId
Identifier of the next-hop, hostname or mac adress.
OctetString
Constraints:
range: 24-24
 .1.3.6.1.4.1.2272.1.8.7.1.14

rcIpConfDhcpTable

table
.1.3.6.1.4.1.2272.1.8.8 · 1 row entry · 12 columns
Open in standard view 
DHCP configuration table
rcIpConfDhcpEntry entry .1.3.6.1.4.1.2272.1.8.8.1
Used to configure DHCP on a particular port. An
entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.

Once created this entry will only be deleted if the
rcIpConfDhcpRowSta…
Indexes
rcIpConfDhcpIfIndex
Column Syntax OID
rcIpConfDhcpIfIndex
Interface number. The number can represent either
a physical or logical(VLAN) interface.
Integer32
Constraints:
range: 0-6142
 .1.3.6.1.4.1.2272.1.8.8.1.1
rcIpConfDhcpMaxHop
Used to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2272.1.8.8.1.2
rcIpConfDhcpMinSec
Used to indicate the minimum number of seconds
to wait between receiving a DHCP packet and
actually forwarding the DHCP packet to the
destination device. A value of zero(0) indicates
forwarding should be done immedia…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.8.1.3
rcIpConfDhcpMode
Used to indicate what type of DHCP packets this
interface should support. A value of none(1) will
result in all incoming DHCP and BOOTP packets to
be dropped.
Enumerationr/w
Enumerated Values:
0none
2bootp
3dhcp
4both
 .1.3.6.1.4.1.2272.1.8.8.1.4
rcIpConfDhcpRowStatus
An entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.

Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus is set to 'destroy(6)'. In
which case, the…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.8.1.5
rcIpConfDhcpNumRequests
The total number of DHCP requests seen on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.8.1.6
rcIpConfDhcpNumReplies
The total number of DHCP replies seen on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.8.1.7
rcIpConfDhcpAlwaysBroadcast
Used to indicate if DHCP Reply packets should be
broadcast to the DHCP client on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.8.1.8
rcIpConfDhcpCircuitId
Used to indicate if DHCP packets should have
option82 circuitId info inserted before sent to
servers, for this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.8.1.11
rcIpConfDhcpRemoteId
Used to indicate if DHCP packets should have
option82 remoteId info inserted before sent to
servers, for this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.8.1.12
rcIpConfDhcpTrusted
Used to indicate if DHCP packets come through a
trusted dhcp circuit. This means that packets with
giaddr set to 0 having option82 in it, will be forwarded
if the circuit is trusted.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.8.1.13
rcIpConfDhcpAgentAddr
The IP address configured as relay on this interface; it is either the IP of the
physical interface or the IP of the VRRP address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.8.1.14

rcIpDhcpForwardTable

table
.1.3.6.1.4.1.2272.1.8.9 · 1 row entry · 5 columns
Open in standard view 
DHCP forwarding table.
rcIpDhcpForwardEntry entry .1.3.6.1.4.1.2272.1.8.9.1
An entry used represents a DHCP forwarding directive.
Indexes
rcIpDhcpForwardAgentAddr rcIpDhcpForwardServerAddr
Column Syntax OID
rcIpDhcpForwardAgentAddr
The IP address configured on an interface
(i.e., a locally configured IP address).
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.9.1.1
rcIpDhcpForwardServerAddr
The IP address of the DHCP server. If this
IP address corresponds to a locally configured
IP network, the DHCP packet is broadcasted out
the interface the IP address is assigned to.
This behavior is known as 'relay age…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.9.1.2
rcIpDhcpForwardEnable
Used to indicate whether is entry should be used.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.9.1.3
rcIpDhcpForwardMode
Used to indicate whether this entry pertains to
BOOTP packets, DHCP packets, or both.
Enumerationr/w
Enumerated Values:
0none
2bootp
3dhcp
4both
 .1.3.6.1.4.1.2272.1.8.9.1.4
rcIpDhcpForwardRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.9.1.5

rcIpUdpProtocolTable

table
.1.3.6.1.4.1.2272.1.8.13.2 · 1 row entry · 3 columns
Open in standard view 
list of UDP protocols. Used to determine whether to
forward the UDP broadcast packet or not.
rcIpUdpProtocolEntry entry .1.3.6.1.4.1.2272.1.8.13.2.1
Used to include a particular UDP port in the table.
An entry in this table indicates that the box might do
forwarding of UDP broadcast packets if there is a
matching entry for this packet in the
rcIpUdpPortFwdTable.
Indexes
rcIpUdpProtocolPortNumber
Column Syntax OID
rcIpUdpProtocolPortNumber
well-known UDP Port number. Pre-assigned port
number for this protocol. Port used by the
server process as its contact port. It cannot
be BOOTP/DHCP port#s 67, 68.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.13.2.1.1
rcIpUdpProtocolName
Used to indicate the name of the protocol
that is running on top of UDP protocol.
cannot change the name once created. This
should be set while creating the entry.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2272.1.8.13.2.1.2
rcIpUdpProtocolRowStatus
Rowstatus of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.13.2.1.3

rcIpUdpPortFwdTable

table
.1.3.6.1.4.1.2272.1.8.13.4 · 1 row entry · 9 columns
Open in standard view 
Udp forward entry table.
rcIpUdpPortFwdEntry entry .1.3.6.1.4.1.2272.1.8.13.4.1
An entry is configured to specify forwarding policy
parameters.
Indexes
rcIpUdpPortFwdDestPort rcIpUdpPortFwdDestAddr
Column Syntax OID
rcIpUdpPortFwdDestPort
The well-known port number defined for UDP/TCP
depending on the value of IpProtoType field in this
entry. This port number has to be defined in the
rcIpUdpProtoTable. In order to select this policy the
destination por…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.13.4.1.1
rcIpUdpPortFwdDestAddr
Destination IP address. The IP addres to which the
UDP/TCP broadcast should be forwarded. This IP address
can be any IP server address or subnet broadcast
address. If the IP address is one of the routable
interface…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.13.4.1.2
rcIpUdpPortFwdId
Identifier of this entry. Used internally to identify
this entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.13.4.1.3
rcIpUdpPortFwdFwdListIdListSize
Used to indicate the number of id(s) in the
rcIpUdpPortFwdListId variable.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.13.4.1.4
rcIpUdpPortFwdFwdListIdList
Used to indicate zero or more rcIpUdpPortFwdListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2272.1.8.13.4.1.5
rcIpUdpPortFwdNumFwdPackets
The total number of UDP/TCP broadcast packets forwarded
using this policy.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.4.1.6
rcIpUdpPortFwdNumDropPacketsTtlExpired
The total number of UDP/TCP broadcast packets dropped
because the TTL has expired.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.4.1.7
rcIpUdpPortFwdNumDropPacketsDestUnreach
The total number of UDP/TCP broadcast packets dropped
because the rcIpUdpPortFwdDestAddr specified in
this policy was unreachable.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.4.1.8
rcIpUdpPortFwdRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.13.4.1.9

rcIpUdpPortFwdListTable

table
.1.3.6.1.4.1.2272.1.8.13.6 · 1 row entry · 5 columns
Open in standard view 
A table used to group rcIpUdpPortFwdEntry(s) 
into a list.
rcIpUdpPortFwdListEntry entry .1.3.6.1.4.1.2272.1.8.13.6.1
Route entry attributes.
Indexes
rcIpUdpPortFwdListId
Column Syntax OID
rcIpUdpPortFwdListId
A value that uniquely identifies this list of
rcIpUdpPortFwdListEntry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.8.13.6.1.1
rcIpUdpPortFwdListName
An administratively-assigned name for this list.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.13.6.1.3
rcIpUdpPortFwdListFwdIdListSize
Used to indicate the number of rcIpUdpPortFwdNetEntry
id(s) in the rcIpUdpPortFwdListIdList variable.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.13.6.1.4
rcIpUdpPortFwdListFwdIdList
Used to indicate zero or more UdpPortFwd entries
that are associated to this list. Each entry identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetStringr/w
Constraints:
range: 128-128
 .1.3.6.1.4.1.2272.1.8.13.6.1.5
rcIpUdpPortFwdListRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.13.6.1.6

rcIpUdpConfBroadcastIntfTable

table
.1.3.6.1.4.1.2272.1.8.13.8 · 1 row entry · 10 columns
Open in standard view 
IP broadcast forward configuration table
rcIpUdpConfBroadcastIntfEntry entry .1.3.6.1.4.1.2272.1.8.13.8.1
Used to configure UDP broadcast forward on a
particular interface.
Indexes
rcIpUdpConfBroadcastIntfLocalIfAddr
Column Syntax OID
rcIpUdpConfBroadcastIntfLocalIfAddr
The ip address of the local interface that is
partipating in the forwarding UDP broadcast packets.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.13.8.1.1
rcIpUdpConfBroadcastIntfUdpPortFwdListId
Used to indicate the number UDP ports that this
interface is configured to forward.

A value of '0' indicates that this interface will not
forward any UDP broadcast packets. This is a required
field to cr…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.13.8.1.2
rcIpUdpConfBroadcastIntfMaxTtl
Used to indicate the maximum number of hops an
IP broadcast packet can take from the source
device to the destination device.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2272.1.8.13.8.1.3
rcIpUdpConfBroadcastIntfNumRxPkts
The total number of UDP/TCP broadcast packets
received by this local interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.8.1.4
rcIpUdpConfBroadcastIntfNumFwdPkts
The total number of UDP/TCP broadcast packets
forwarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.8.1.5
rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired
The total number of UDP/TCP broadcast packets
dropped because the TTL has expired.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.8.1.6
rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach
The total number of UDP broadcast packets
dropped because the destination was unreachable.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.8.1.7
rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort
The total number of UDP/TCP broadcast packets
dropped because the destination port/protocol
specified has no matching forwarding policy.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.13.8.1.8
rcIpUdpConfBroadcastIntfRowStatus
Entry row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.13.8.1.9
rcIpUdpConfBroadcastIntfBroadCastMask
The subnet mask of the local interface that is
used for broadcasting the UDP broadcast packets.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.13.8.1.10

rcIpPimTable

table
.1.3.6.1.4.1.2272.1.8.16.2 · 1 row entry · 7 columns
Open in standard view 
IP Pim table
rcIpPimEntry entry .1.3.6.1.4.1.2272.1.8.16.2.1
An entry of Ip Pim Table.
Indexes
rcIpPimIfIndex
Column Syntax OID
rcIpPimIfIndex
port
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.16.2.1.1
rcIpPimEnable
enable interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.16.2.1.2
rcIpPimMode Enumerationr/w
Enumerated Values:
1dense
2sparse
3sparseDense
4ssm
 .1.3.6.1.4.1.2272.1.8.16.2.1.3
rcIpPimHelloInterval
frq. at which hello sent.
Integer32r/w
Constraints:
range: 0-18724
 .1.3.6.1.4.1.2272.1.8.16.2.1.4
rcIpPimJoinPruneInterval Integer32r/w
Constraints:
range: 1-18724
 .1.3.6.1.4.1.2272.1.8.16.2.1.5
rcIpPimCBSRPreference Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.2272.1.8.16.2.1.6
rcIpPimIntfType
Pim interface type.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.2272.1.8.16.2.1.7

rcIpPimInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.16.3 · 1 row entry · 3 columns
Open in standard view 
IP Pim table
rcIpPimInterfaceEntry entry .1.3.6.1.4.1.2272.1.8.16.3.1
An entry of Ip Pim Interface Table.
Indexes
rcIpPimInterfaceIfIndex
Column Syntax OID
rcIpPimInterfaceIfIndex
port
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.16.3.1.1
rcIpPimInterfaceOperState
The current operational state of this PIM interface.
This object is deprecated in favor of ifOperStatus.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.8.16.3.1.2
rcIpPimInterfaceType
Pim interface type.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.2272.1.8.16.3.1.3

rcIpPimStaticRPTable

table
.1.3.6.1.4.1.2272.1.8.16.4 · 1 row entry · 5 columns
Open in standard view 
The table lists all the RPs configured statically for
various IP multicast groups.
rcIpPimStaticRPEntry entry .1.3.6.1.4.1.2272.1.8.16.4.1
An entry (conceptual row) in the rcIpPimStaticRPTable.
Indexes
rcIpPimStaticRPGroupAddress rcIpPimStaticRPGroupMask rcIpPimStaticRPAddress
Column Syntax OID
rcIpPimStaticRPGroupAddress
The IP multicast group address which, when combined with
rcIpPimStaticRPGroupMask, identifies a group prefix for
which rcIpPimStaticRPAddress is a static-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.16.4.1.1
rcIpPimStaticRPGroupMask
The multicast group address mask which, when combined
with rcIpPimStaticRPGroupAddress, identifies a group
prefix for which rcIpPimStaticRPAddress is a static-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.16.4.1.2
rcIpPimStaticRPAddress
The (unicast) address of the static-RP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.16.4.1.3
rcIpPimStaticRPRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.16.4.1.4
rcIpPimStaticRPStatus
The status of StaticRP.
Enumeration
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.2272.1.8.16.4.1.5

rcIpPimVirtualNbrTable

table
.1.3.6.1.4.1.2272.1.8.16.6 · 1 row entry · 3 columns
Open in standard view 
Table listing the router's virtual PIM neighbors
rcIpPimVirtualNbrEntry entry .1.3.6.1.4.1.2272.1.8.16.6.1
An entry in the virtual PIM neighbors' table.
Indexes
rcIpPimVirtualNbrAddress
Column Syntax OID
rcIpPimVirtualNbrAddress
The IP address of the virtual PIM neighbor for which this entry
contains information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.16.6.1.1
rcIpPimVirtualNbrIfIndex
The value of ifIndex for the PIM interface in which this virtual
neighbor is created. This value is mandatory while trying to create
a virtual PIM neighbor.
InterfaceIndexr/w
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.16.6.1.2
rcIpPimVirtualNbrRowStatus
To create/delete an entry in the virtual PIM neighbors'
table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.16.6.1.3

rcIpMulticastArpTable

table
.1.3.6.1.4.1.2272.1.8.17 · 1 row entry · 7 columns
Open in standard view 
IP Multicast Arp table
rcIpMulticastArpEntry entry .1.3.6.1.4.1.2272.1.8.17.1
An entry of Ip Multicast Arp Table.
Indexes
rcIpMulticastArpVlanId rcIpMulticastArpMacAddress rcIpMulticastArpIpAddress
Column Syntax OID
rcIpMulticastArpVlanId
vlan id
Integer32
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.8.17.1.1
rcIpMulticastArpMacAddress
multicast mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.17.1.2
rcIpMulticastArpIpAddress
multicast ip address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.17.1.3
rcIpMulticastArpPorts
ports within a particular vlan
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.17.1.4
rcIpMulticastArpNumMltIds
number of mlt ids
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.17.1.5
rcIpMulticastArpMltIds
mlt id
IdListr/w
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.8.17.1.6
rcIpMulticastArpRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.17.1.7

rcIpRipInterfaceTable

table
.1.3.6.1.4.1.2272.1.8.20.1 · 1 row entry · 16 columns
Open in standard view 
IP Rip Interface table
rcIpRipInterfaceEntry entry .1.3.6.1.4.1.2272.1.8.20.1.1
An entry of Ip Rip Interface Table.
Indexes
rcIpRipInterfaceAddress
Column Syntax OID
rcIpRipInterfaceAddress
Ip Address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.20.1.1.1
rcIpRipInterfaceIfIndex
Rip Interface If Index.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.20.1.1.2
rcIpRipInterfaceRipEnable EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.20.1.1.3
rcIpRipInterfaceAccDefRte SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.4
rcIpRipInterfaceAdvDefRte SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.5
rcIpRipInterfaceAutoAggregate SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.6
rcIpRipInterfaceCost SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.20.1.1.7
rcIpRipInterfaceListen SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.8
rcIpRipInterfacePoison SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.9
rcIpRipInterfaceSupply SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.10
rcIpRipInterfaceTriggeredUpdate SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.11
rcIpRipInterfaceInPolicy RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.20.1.1.12
rcIpRipInterfaceOutPolicy RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.20.1.1.13
rcIpRipInterfaceProxyAnnounceFlag SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.20.1.1.14
rcIpRipInterfaceHolddown
Used to indicate the rip holddown timer for this
interface
Integer32r/w
Constraints:
range: 0-360
 .1.3.6.1.4.1.2272.1.8.20.1.1.15
rcIpRipInterfaceTimeout
Used to indicate the rip timeout interval for this
interface
Integer32r/w
Constraints:
range: 15-259200
 .1.3.6.1.4.1.2272.1.8.20.1.1.16

rcIpMulticastTimedPruneTable

table
.1.3.6.1.4.1.2272.1.8.21 · 1 row entry · 7 columns
Open in standard view 
This feature provides the ability for the user to 
create (S,G)  Forwarding Entries that would not be
pruned until a configurable timer expires. This feature 
is targeted for Passport 8600. Currently
the timer value is set to 0.
rcIpMulticastTimedPruneEntry entry .1.3.6.1.4.1.2272.1.8.21.1
An entry of Ip Multicast Timed Prune Table.
Indexes
rcIpMulticastTimedPruneGroupAddress rcIpMulticastTimedPruneSourceAddress rcIpMulticastTimedPruneSrcSubnetMask
Column Syntax OID
rcIpMulticastTimedPruneGroupAddress
This field indicates the IP Multicast Group
Address associated with the IP multicast stream.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.21.1.1
rcIpMulticastTimedPruneSourceAddress
This is the Source Subnet IP address of the
sender of the IP multicast stream.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.21.1.2
rcIpMulticastTimedPruneSrcSubnetMask
This is the Source Subnet Mask IP address of
the sender of the IP multicast stream.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.21.1.3
rcIpMulticastTimedPruneAgingTimer
This field represents the amount of time
(in minutes) this timed prune entry will be
kept in the forwarding table when there are no
more receivers. After this timer expires, this
timed prune entry would be treated a…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.21.1.4
rcIpMulticastTimedPruneTimeLeft
This read-only field represents the remaining time
for which this timed prune entry will be kept in
the forwarding table. After this timer expires,
this timed prune entry would be treated as a normal
DVMRP/PIM forwar…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.21.1.5
rcIpMulticastTimedPruneLastActivity
This read-only field represents the actual time since
the traffic has come from this Source, Group pair.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.21.1.6
rcIpMulticastTimedPruneRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.21.1.7

rcIpConfIcmpRdiscTable

table
.1.3.6.1.4.1.2272.1.8.22 · 1 row entry · 7 columns
Open in standard view 
A table used to maintain ICMP Route discovery information
for a particular interface.
rcIpConfIcmpRdiscEntry entry .1.3.6.1.4.1.2272.1.8.22.1
Entry containing ICMP Rdisc information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.
Indexes
rcIpConfIcmpRdiscIfIndex
Column Syntax OID
rcIpConfIcmpRdiscIfIndex
An unique value to identify a physical
interface or a logical interface (VLAN).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.22.1.1
rcIpConfIcmpRdiscAdvAddress
Advertisement address to which the route discovery
advertisements transmitted on this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.22.1.2
rcIpConfIcmpRdiscAdvFlag
Flag to indicate whether or not the address is to
be advertised on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.22.1.3
rcIpConfIcmpRdiscAdvLifetime
The value to be placed in the lifetime field of
Router Advertisements sent from the interface.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.2272.1.8.22.1.4
rcIpConfIcmpRdiscMaxAdvInterval
The maximum time allowed between sending
Router Advertisements from this interface.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.2272.1.8.22.1.5
rcIpConfIcmpRdiscMinAdvInterval
The minimum time allowed between sending
Router Advertisements from this interface.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.2272.1.8.22.1.6
rcIpConfIcmpRdiscPreferenceLevel
Preferability of the router address as a default
Router
Integer32r/w
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.2272.1.8.22.1.7

rcIpMrouteHwTable

table
.1.3.6.1.4.1.2272.1.8.24.1 · 1 row entry · 5 columns
Open in standard view 
The (conceptual) table containing hardware entries of
multicast routing information for all the Group Address.
rcIpMrouteHwEntry entry .1.3.6.1.4.1.2272.1.8.24.1.1
An entry (conceptual row) containing hardware entries of
multicast routing information for a particular Group
Address.
Indexes
rcIpMrouteHwGroupAddress rcIpMrouteHwSubnet rcIpMrouteHwInvlan rcIpMrouteHwIndex
Column Syntax OID
rcIpMrouteHwGroupAddress
The IP multicast group address for which this entry
contains multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.1.1.1
rcIpMrouteHwSubnet
The network address from where the source is sending the
stream of traffic for which this entry contains multicast
routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.1.1.2
rcIpMrouteHwInvlan
The Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.24.1.1.3
rcIpMrouteHwPruned
This is to show weather the entry containing multicast
routing information has received Prune message or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.24.1.1.4
rcIpMrouteHwIndex
This Index value keep tracks of the hardware record that
has been accessed for displaying the entry containing multicast routing information.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.24.1.1.5

rcIpMrouteHwPrunesTable

table
.1.3.6.1.4.1.2272.1.8.24.2 · 1 row entry · 5 columns
Open in standard view 
The (conceptual) table containing prune entries of
multicast routing information for the Group Address.
rcIpMrouteHwPrunesEntry entry .1.3.6.1.4.1.2272.1.8.24.2.1
An entry (conceptual row) containing prune entries of
multicast routing information for a particular Group
Address.
Indexes
rcIpMrouteHwPrunesGroupAddress rcIpMrouteHwPrunesSubnet rcIpMrouteHwPrunesInvlan rcIpMrouteHwPrunesNeighbor
Column Syntax OID
rcIpMrouteHwPrunesGroupAddress
The IP multicast group address for which this entry
contains multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.2.1.1
rcIpMrouteHwPrunesSubnet
The network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.2.1.2
rcIpMrouteHwPrunesInvlan
The Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.24.2.1.3
rcIpMrouteHwPrunesNeighbor
The IpAddress from where the Prune message has been
received.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.2.1.4
rcIpMrouteHwPrunesTimer
This is to show how much time is left for this particular
entry containing multicast routing information during
which the graft message can be sent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.24.2.1.5

rcIpMrouteHwSourcesTable

table
.1.3.6.1.4.1.2272.1.8.24.3 · 1 row entry · 5 columns
Open in standard view 
The (conceptual) table containing source entries of
multicast routing information for the Group Address.
rcIpMrouteHwSourcesEntry entry .1.3.6.1.4.1.2272.1.8.24.3.1
An entry (conceptual row) containing source entries of
multicast routing information for a particular Group
Address.
Indexes
rcIpMrouteHwSourcesGroupAddress rcIpMrouteHwSourcesSubnet rcIpMrouteHwSourcesInvlan rcIpMrouteHwSourcesAddress
Column Syntax OID
rcIpMrouteHwSourcesGroupAddress
The IP multicast group address for which this entry
contains multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.3.1.1
rcIpMrouteHwSourcesSubnet
The network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.3.1.2
rcIpMrouteHwSourcesInvlan
The Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.24.3.1.3
rcIpMrouteHwSourcesAddress
The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this
entry contains multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.3.1.4
rcIpMrouteHwSourcesIngressPort
The Ingress vlan ports from where the traffic is coming,
for which this entry contains multicast routing
information.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.24.3.1.5

rcIpMrouteHwEgressVlansTable

table
.1.3.6.1.4.1.2272.1.8.24.4 · 1 row entry · 6 columns
Open in standard view 
The (conceptual) table containing egress vlan entries of
multicast routing information for the Group Address.
rcIpMrouteHwEgressVlansEntry entry .1.3.6.1.4.1.2272.1.8.24.4.1
An entry (conceptual row) containing egress vlan entries
of multicast routing information for a particular Group
Address.
Indexes
rcIpMrouteHwEgressVlansGroupAddress rcIpMrouteHwEgressVlansSubnet rcIpMrouteHwEgressVlansInvlan rcIpMrouteHwEgressVlansId rcIpMrouteHwEgressVlansIndex
Column Syntax OID
rcIpMrouteHwEgressVlansGroupAddress
The IP multicast group address for which this entry
contains multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.4.1.1
rcIpMrouteHwEgressVlansSubnet
The network address from where the source is sending the
stream of traffic for which this entry contains
multicast routing information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.24.4.1.2
rcIpMrouteHwEgressVlansInvlan
The Ingress vlan Id from where the traffic is coming for
which this entry contains multicast routing information.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.24.4.1.3
rcIpMrouteHwEgressVlansId
The Egress vlan Id from where the traffic is going out
for which this entry contains multicast routing
information
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.24.4.1.4
rcIpMrouteHwEgressVlansPorts
he Egress vlan ports from where the traffic is going out
for which this entry contains multicast routing
information.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.24.4.1.5
rcIpMrouteHwEgressVlansIndex
This Index value keep tracks of the hardware record that
has been accessed for displaying the entry containing
multicast routing information.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.24.4.1.6

rcIpRsmltOperTable

table
.1.3.6.1.4.1.2272.1.8.26.2 · 1 row entry · 14 columns
Open in standard view 
Route Smlt Table
rcIpRsmltOperEntry entry .1.3.6.1.4.1.2272.1.8.26.2.1
An entry of Ip As Path Access List Table.
Indexes
rcIpRsmltOperIfIndex
Column Syntax OID
rcIpRsmltOperIfIndex
Route Smlt Oper IfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.26.2.1.1
rcIpRsmltOperAdminStatus
is a enable/disable flag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.26.2.1.2
rcIpRsmltOperHoldDownTimer
Timer value, the range of value is from 0 to 3600.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.2.1.3
rcIpRsmltOperHoldDownTimeRemaining
The time value that indicate how much time
remaining of HoldDownTimer.
Integer32
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.2.1.4
rcIpRsmltOperHoldUpTimer
The range of value 0 to 3600 or 9999. 9999 means
infinity.
Integer32r/w
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.2.1.5
rcIpRsmltOperHoldUpTimeRemaining
The time value that indicate how much time
remaining of HoldUpTimer.
Integer32
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.2.1.6
rcIpRsmltOperIpAddr
IP Interface with RSMLT on.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.26.2.1.7
rcIpRsmltOperOperStatus
The operation status of Rsmlt, up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.8.26.2.1.8
rcIpRsmltOperSmltId
The id range for SMLT is 1-32.
IdList
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.8.26.2.1.9
rcIpRsmltOperVlanId
Vlan id.
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.8.26.2.1.11
rcIpRsmltOperMacAddr
Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.2.1.12
rcIpRsmltOperRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.26.2.1.13
rcIpRsmltOperVrfId
Indicates the Virtual Router to which the RSMLT
Oper instance belongs.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.26.2.1.14
rcIpRsmltOperVrfName
Name of the Virtual Router to which the RSMLT Oper
instance belongs.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.26.2.1.15

rcIpRsmltPeerTable

table
.1.3.6.1.4.1.2272.1.8.26.3 · 1 row entry · 13 columns
Open in standard view 
Route Smlt Table
rcIpRsmltPeerEntry entry .1.3.6.1.4.1.2272.1.8.26.3.1
An entry of Ip As Path Access List Table.
Indexes
rcIpRsmltPeerIfIndex
Column Syntax OID
rcIpRsmltPeerIfIndex
Route Smlt Oper IfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.26.3.1.1
rcIpRsmltPeerAdminStatus
is a enable/disable flag.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.26.3.1.2
rcIpRsmltPeerHoldDownTimer
Timer value, the range of value is from 0 to 3600.
Integer32
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.3.1.3
rcIpRsmltPeerHoldDownTimeRemaining
The time value that indicate how much time
remaining of HoldDownTimer.
Integer32
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.3.1.4
rcIpRsmltPeerHoldUpTimer
The range of value 0 to 3600 or 9999. 9999 means
infinity.
Integer32
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.3.1.5
rcIpRsmltPeerHoldUpTimeRemaining
The time value that indicate how much time
remaining of HoldUpTimer.
Integer32
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.3.1.6
rcIpRsmltPeerIpAddr
IP Interface with RSMLT on.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.26.3.1.7
rcIpRsmltPeerOperStatus
The operation status of Rsmlt, up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.8.26.3.1.8
rcIpRsmltPeerSmltId
The id range for SMLT is 1-32.
IdList
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.8.26.3.1.9
rcIpRsmltPeerVlanId
Vlan id.
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.8.26.3.1.11
rcIpRsmltPeerMacAddr
Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.3.1.12
rcIpRsmltPeerVrfId
Indicates the Virtual Router to which the RSMLT Peer
instance belongs.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.26.3.1.13
rcIpRsmltPeerVrfName
Name of the Virtual Router to which the RSMLT Peer
instance belongs.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.26.3.1.14

rcIpRsmltEdgePeerTable

table
.1.3.6.1.4.1.2272.1.8.26.4 · 1 row entry · 5 columns
Open in standard view 
RSMLT Edge Support Peer Info table. This 
table consists of the RSMLT Peers for which 
the switch will act as a PeerForwarder.
rcIpRsmltEdgePeerEntry entry .1.3.6.1.4.1.2272.1.8.26.4.1
RSMLT Edge Support Peer Info Entry
Indexes
rcIpRsmltEdgeVlanId
Column Syntax OID
rcIpRsmltEdgeVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.8.26.4.1.1
rcIpRsmltEdgePeerIpAddress
IP address of the Peer RSMLT Interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.26.4.1.2
rcIpRsmltEdgePeerMacAddress
The MAC address of the Peer RSMLT interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.4.1.3
rcIpRsmltEdgePeerVrfId
Indicates the Virtual Router to which the RSMLT Edge Peer
instance belongs.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.26.4.1.4
rcIpRsmltEdgePeerVrfName
Name of the Virtual Router to which the RSMLT Edge Peer
instance belongs.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.26.4.1.5

rcIpv6RsmltOperTable

table
.1.3.6.1.4.1.2272.1.8.26.5 · 1 row entry · 12 columns
Open in standard view 
Route Smlt Table
rcIpv6RsmltOperEntry entry .1.3.6.1.4.1.2272.1.8.26.5.1
A local IPv6 RSMLT entry
Indexes
rcIpv6RsmltOperIfIndex rcIpv6RsmltOperIpv6Addr rcIpv6RsmltOperIpv6PrefixLength
Column Syntax OID
rcIpv6RsmltOperIfIndex
Route Smlt Oper IfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.26.5.1.1
rcIpv6RsmltOperIpv6Addr
IPv6 Interface with RSMLT on.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.8.26.5.1.2
rcIpv6RsmltOperIpv6PrefixLength
IPv6 Prefix Length.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.26.5.1.3
rcIpv6RsmltOperAdminStatus
is a enable/disable flag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.26.5.1.4
rcIpv6RsmltOperHoldDownTimer
Timer value, the range of value is from 0 to 3600.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.5.1.5
rcIpv6RsmltOperHoldUpTimer
The range of value 0 to 3600 or 9999. 9999 means
infinity.
Integer32r/w
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.5.1.7
rcIpv6RsmltOperOperStatus
The operation status of Rsmlt, up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.8.26.5.1.9
rcIpv6RsmltOperSmltId
The id range for SMLT is 1-32.
IdList
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.8.26.5.1.10
rcIpv6RsmltOperVlanId
Vlan id.
Integer32
Constraints:
range: 1-4093
 .1.3.6.1.4.1.2272.1.8.26.5.1.12
rcIpv6RsmltOperMacAddr
Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.5.1.13
rcIpv6RsmltOperVrfId
Indicates the Virtual Router to which the RSMLT
Oper instance belongs.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.26.5.1.14
rcIpv6RsmltOperVrfName
Name of the Virtual Router to which the RSMLT Oper
instance belongs.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.26.5.1.15

rcIpv6RsmltPeerTable

table
.1.3.6.1.4.1.2272.1.8.26.6 · 1 row entry · 14 columns
Open in standard view 
Route Smlt Peer Table
rcIpv6RsmltPeerEntry entry .1.3.6.1.4.1.2272.1.8.26.6.1
An entry of Ip As Path Access List Table.
Indexes
rcIpv6RsmltPeerIfIndex rcIpv6RsmltPeerIpv6Addr rcIpv6RsmltPeerIpv6PrefixLength
Column Syntax OID
rcIpv6RsmltPeerIfIndex
Route Smlt Oper IfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.8.26.6.1.1
rcIpv6RsmltPeerIpv6Addr
IP Interface with RSMLT on.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.8.26.6.1.2
rcIpv6RsmltPeerIpv6PrefixLength
IPv6 Prefix Length
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.26.6.1.3
rcIpv6RsmltPeerAdminStatus
is a enable/disable flag.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.26.6.1.4
rcIpv6RsmltPeerHoldDownTimer
Timer value, the range of value is from 0 to 3600.
Integer32
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.6.1.5
rcIpv6RsmltPeerHoldDownTimeRemaining
The time value that indicate how much time
remaining of HoldDownTimer.
Integer32
Constraints:
range: 0-3600
 .1.3.6.1.4.1.2272.1.8.26.6.1.6
rcIpv6RsmltPeerHoldUpTimer
The range of value 0 to 3600 or 9999. 9999 means
infinity.
Integer32
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.6.1.7
rcIpv6RsmltPeerHoldUpTimeRemaining
The time value that indicate how much time
remaining of HoldUpTimer.
Integer32
Constraints:
range: 0-3600
range: 9999-9999
 .1.3.6.1.4.1.2272.1.8.26.6.1.8
rcIpv6RsmltPeerOperStatus
The operation status of Rsmlt, up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.8.26.6.1.9
rcIpv6RsmltPeerSmltId
The id range for SMLT is 1-32.
IdList
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.8.26.6.1.10
rcIpv6RsmltPeerVlanId
Vlan id.
Integer32
Constraints:
range: 1-4093
 .1.3.6.1.4.1.2272.1.8.26.6.1.12
rcIpv6RsmltPeerMacAddr
Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.6.1.13
rcIpv6RsmltPeerVrfId
Indicates the Virtual Router to which the RSMLT Peer
instance belongs.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.26.6.1.14
rcIpv6RsmltPeerVrfName
Name of the Virtual Router to which the RSMLT Peer
instance belongs.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.26.6.1.15

rcIpv6RsmltEdgePeerTable

table
.1.3.6.1.4.1.2272.1.8.26.7 · 1 row entry · 4 columns
Open in standard view 
RSMLT Edge Support Peer Info table. This
table consists of the RSMLT Peers for which
the switch will act as a PeerForwarder.
rcIpv6RsmltEdgePeerEntry entry .1.3.6.1.4.1.2272.1.8.26.7.1
RSMLT Edge Support Peer Info Entry
Indexes
rcIpv6RsmltEdgePeerVlanId rcIpv6RsmltEdgePeerIpv6Address rcIpv6RsmltEdgePeerIpv6PrefixLength
Column Syntax OID
rcIpv6RsmltEdgePeerVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.8.26.7.1.1
rcIpv6RsmltEdgePeerIpv6Address
IP address of the Peer RSMLT Interface.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.8.26.7.1.2
rcIpv6RsmltEdgePeerIpv6PrefixLength
If set then this prefix can be used
for address autoconfig,
passed opaquely to Infinity
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.26.7.1.3
rcIpv6RsmltEdgePeerMacAddress
The MAC address of the Peer RSMLT interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.26.7.1.4

rcIpDhcpOp82StatsTable

table
.1.3.6.1.4.1.2272.1.8.29 · 1 row entry · 10 columns
Open in standard view 
DHCP statistics table for Relay Agent Information Option
rcIpDhcpOp82StatsEntry entry .1.3.6.1.4.1.2272.1.8.29.1
Used to see current statistics on interfaces that have
DHCP Option 82 (Relay Agent Information) enabled.
This table is read-only.
Indexes
rcIpDhcpOp82StatsIfIndex
Column Syntax OID
rcIpDhcpOp82StatsIfIndex
Interface number. The number can represent either
a physical or logical(VLAN) interface.
Integer32
Constraints:
range: 0-6142
 .1.3.6.1.4.1.2272.1.8.29.1.1
rcIpDhcpOp82StatsFoundOp82
Represents the number of packets received on the interface
that already had Dhcp Option 82 inserted in them
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.2
rcIpDhcpOp82StatsDropped
Represents the number of packets dropped because of reasons related
to Dhcp Option 82. These reasons could be that the packet was received
from an untrusted source or spoofing was detected.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.3
rcIpDhcpOp82StatsCircuitId
Represents the value of CircuitId inserted in the packets.
This is the Port number of the Dhcp Relay.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.29.1.4
rcIpDhcpOp82StatsAddedCircuitId
Represents the number of packets which had CircuitId inserted on this interface
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.5
rcIpDhcpOp82StatsRemovedCircuitId
Represents the number of packets which had CircuitId removed on this interface
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.6
rcIpDhcpOp82StatsRemoteId
Represents the value of RemoteId inserted in the packets.
This is the Mac address of the Dhcp Relay.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.8.29.1.7
rcIpDhcpOp82StatsAddedRemoteId
Represents the number of packets which had RemoteId inserted on this interface
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.8
rcIpDhcpOp82StatsRemovedRemoteId
Represents the number of packets which had RemoteId removed on this interface
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.29.1.9
rcIpDhcpOp82StatsAgentAddr
The IP address configured as relay on this interface; it is either the IP of the
physical interface or the IP of the VRRP address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.29.1.10

rcIpAsPathAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.2 · 1 row entry · 5 columns
Open in standard view 
IP As Path Access List table
rcIpAsPathAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.2.1
An entry of Ip As Path Access List Table.
Indexes
rcIpAsPathAccessListId rcIpAsPathAccessListMemberId
Column Syntax OID
rcIpAsPathAccessListId
Path Access List entry Id.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.2.1.1
rcIpAsPathAccessListMemberId
frq. at which hello sent.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.2.1.2
rcIpAsPathAccessListMode
Path Access List Mode, permit or deny.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.2.1.3
rcIpAsPathAccessListAsRegularExpression
IP Path Access List Regular Expression
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.8.100.2.1.4
rcIpAsPathAccessListRowStatus
Table row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.2.1.5

rcIpCommunityAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.4 · 1 row entry · 5 columns
Open in standard view 
IP CommunityAccess List table
rcIpCommunityAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.4.1
An entry of Ip CommunityAccess List Table.
Indexes
rcIpCommunityAccessListId rcIpCommunityAccessListMemberId
Column Syntax OID
rcIpCommunityAccessListId
IP CommunityAccess entry List Id
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.4.1.1
rcIpCommunityAccessListMemberId
frq. at which hello sent.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.4.1.2
rcIpCommunityAccessListMode
IP Community Access List Mode, permit or deny.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.4.1.3
rcIpCommunityAccessListCommunity
IP Community Access List Community string.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.8.100.4.1.4
rcIpCommunityAccessListRowStatus
IP Community Access Table Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.4.1.5

rcIpAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.6 · 1 row entry · 6 columns
Open in standard view 
IP Access List table
rcIpAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.6.1
An entry of Ip Access List Table.
Indexes
rcIpAccessListId rcIpAccessListMode rcIpAccessListNetwork rcIpAccessListNetworkMask
Column Syntax OID
rcIpAccessListId Integer32
Constraints:
range: 1-99
 .1.3.6.1.4.1.2272.1.8.100.6.1.1
rcIpAccessListMode Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.6.1.2
rcIpAccessListNetwork SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.6.1.3
rcIpAccessListNetworkMask SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.6.1.4
rcIpAccessListName RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.6.1.5
rcIpAccessListRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.6.1.6

rcIpExtendedAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.8 · 1 row entry · 8 columns
Open in standard view 
IP Extended Access List table
rcIpExtendedAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.8.1
An entry of Ip Extended Access List Table.
Indexes
rcIpExtendedAccessListId rcIpExtendedAccessListMode rcIpExtendedAccessListNetwork rcIpExtendedAccessListNetworkWildCard rcIpExtendedAccessListNetworkMask rcIpExtendedAccessListNetworkMaskWildCard
Column Syntax OID
rcIpExtendedAccessListId Integer32
Constraints:
range: 100-199
 .1.3.6.1.4.1.2272.1.8.100.8.1.1
rcIpExtendedAccessListMode Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.8.1.2
rcIpExtendedAccessListNetwork SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.3
rcIpExtendedAccessListNetworkWildCard SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.4
rcIpExtendedAccessListNetworkMask SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.5
rcIpExtendedAccessListNetworkMaskWildCard SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.6
rcIpExtendedAccessListName RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.8.1.7
rcIpExtendedAccessListRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.8.1.8

rcIpPrefixListTable

table
.1.3.6.1.4.1.2272.1.8.100.10 · 1 row entry · 7 columns
Open in standard view 
IP Prefix List table
rcIpPrefixListEntry entry .1.3.6.1.4.1.2272.1.8.100.10.1
An entry of Ip Prefix List Table.
Indexes
rcIpPrefixListId rcIpPrefixListPrefix rcIpPrefixListPrefixMaskLen
Column Syntax OID
rcIpPrefixListId
ListId
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.10.1.1
rcIpPrefixListPrefix
Is a member of a specific prefix list.
Adding the prefix to the given prefix list
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.10.1.2
rcIpPrefixListPrefixMaskLen
prefix mask length
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.3
rcIpPrefixListMaskLenFrom
used with mask len
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.4
rcIpPrefixListMaskLenUpto
used with mask len
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.5
rcIpPrefixListName
list name
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.10.1.6
rcIpPrefixListRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.10.1.7

rcIpRoutePolicyTable

table
.1.3.6.1.4.1.2272.1.8.100.13 · 1 row entry · 43 columns
Open in standard view 
IP Route Map table
rcIpRoutePolicyEntry entry .1.3.6.1.4.1.2272.1.8.100.13.1
An entry of Ip Route Map Table.
Indexes
rcIpRoutePolicyId rcIpRoutePolicySequenceNumber
Column Syntax OID
rcIpRoutePolicyId
Index used to identify a group of policies in
the route policy tableRoute map id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.1
rcIpRoutePolicySequenceNumber
second index used to identify a specific policy
with in the route policy group (grouped by Id).
This field allows users to specify different
MATCH, SET parameters and an action.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.2
rcIpRoutePolicyName
Is used to group a set of policies with different
sequence number. Id & Name have one-on-one
relationship. Different policy groups can
contain same sequence number, whereas with in
a gro…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.13.1.3
rcIpRoutePolicyEnable
Value specified here indicate whether
this policy is enabled or not. If
disabled policy sould not be used.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.100.13.1.4
rcIpRoutePolicyMode
specifies the action to be taken when this
policy is selected for a specific route.
This can be permit or deny or continue.
Permit indicates allow the route, deny indicates
ignore the route. Continue means continue
chec…
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.13.1.5
rcIpRoutePolicyMatchProtocol
Match protocol. Used for RIP and DVMRP announce
policy only.
Value is one of multiple (logical 'OR)
of the following values:
direct(1),
static(2),
rip(4),
ospf(8),
ebgp(16),
dvmrp(32),
ibgp(64),
…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.8.100.13.1.6
rcIpRoutePolicyMatchAsPath
Applicable to BGP protocol only. Match the BGP
autonomous system path. This will override the
BGP neighbor filter list info.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.7
rcIpRoutePolicyMatchCommunity
Applicable to BGP protocol only. Filter
incoming/outgoing updates based on communities.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.8
rcIpRoutePolicyMatchCommunityExact
If enabled indicates the match has be an exact
(i.e., all of the communities specified in the
path has to be matched).
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.9
rcIpRoutePolicyMatchNetwork
can specify one or more prefix list name or id(s)
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.10
rcIpRoutePolicyMatchIpRouteSource
In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.11
rcIpRoutePolicyMatchNextHop
In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.12
rcIpRoutePolicyMatchInterface
Match received interface. Only for rip routes.
Ignored in all other cases.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.13
rcIpRoutePolicyMatchRouteType
For BGP this choice refers to locally generated
routes external routes learned via ebgp nbr. For
OSPF internal refers to intra and inter area
routes (belongs to local autonomous system).
External (type1|type2) refers to…
Enumerationr/w
Enumerated Values:
0any
1local
2internal
3external
4externaltype1
5externaltype2
 .1.3.6.1.4.1.2272.1.8.100.13.1.14
rcIpRoutePolicyMatchMetric
Match mec field in the incoming advertisement.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.15
rcIpRoutePolicyMatchTag
specifies a list of tag(s), that will be used
during the match criteria process.contains one
or more tag values..
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.16
rcIpRoutePolicySetRoutePreference
if non-zero specifies the route preference
value to be assigned to the routes that applies
this policy.contains one or more tag values..
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.13.1.17
rcIpRoutePolicySetAsPath
The AS path vaule to be used whether the
SetAsPathMode is Tag or Prepend.as-path string..
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.18
rcIpRoutePolicySetAsPathMode
It can be either tag or prepend tag.
applicable only while redistributing routes to
BGP.Converts the tag of a route into AS path.
Enumerationr/w
Enumerated Values:
1tag
2prepend
 .1.3.6.1.4.1.2272.1.8.100.13.1.19
rcIpRoutePolicySetAutomaticTag EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.20
rcIpRoutePolicySetCommunityNumber
this value can be a number (1..42949672000)
or no-export or no-advertise. Applicable to
BGP advertisments.community number.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.21
rcIpRoutePolicySetCommunityMode
this value can be either append or none
unchanged - keep the community attribute in the
route path as it is.
none - remove the community in the route path
additive - adds the community-number specified
…
Enumerationr/w
Enumerated Values:
0unchanged
1none
2append
 .1.3.6.1.4.1.2272.1.8.100.13.1.22
rcIpRoutePolicySetMetricTypeInternal
Indicates to set the MED value for routes
advertised to ebgp nbrs to the IGP metric value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.23
rcIpRoutePolicySetMetric
Value of the metric to be used while sending an
update for the routes that match the matching
criteria in this route policy.
Default - 0 indicates the internal value defined
for protocol
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.24
rcIpRoutePolicySetMetricType
Metric type for the routes to be imported into
OSPF routing protocol, which passed the matching
criteria configured in this route policy.
Enumerationr/w
Enumerated Values:
1type1
2type2
3internal
4external
 .1.3.6.1.4.1.2272.1.8.100.13.1.25
rcIpRoutePolicySetNextHop
IpAddress of the next hop router. Ignored for
DVMRP routes.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.13.1.26
rcIpRoutePolicySetOrigin
igp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol).
Enumerationr/w
Enumerated Values:
0unchanged
1igp
2egp
3incomplete
 .1.3.6.1.4.1.2272.1.8.100.13.1.27
rcIpRoutePolicySetLocalPref
this value will be used during route decision
process in the BGP protocol. Applicable to BGP
only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.28
rcIpRoutePolicySetOriginEgpAs
indicates the Remote autonomous sys number.
Applicable to BGP only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.29
rcIpRoutePolicySetTag
Value to be used for setting tag of the
destination routing protocol. If not specified
forward the tag value in the source routing
protocol. Value 0 indicates not set
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.30
rcIpRoutePolicySetWeight
Should be using with match as-path condition.
Weight value for the routing table. For BGP
this value will override the weight configured
through NetworkTableEntry or FilterListWeight or
NeighborWeight. Used for BGP only…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.31
rcIpRoutePolicySetInjectNetList
specifies the prefix list to be used either
for injecting the routes into the routing
table or to include the networks in the
advertisement. Ignored for DVMRP.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.32
rcIpRoutePolicyRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.13.1.33
rcIpRoutePolicySetMask
Set Mask Ip Address
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.13.1.34
rcIpRoutePolicyNssaPbit
Set/Reset P bit in specified type 7 LSA.
By default P bit is always set in case user
set it to disable state for particular route
policy than all type 7 LSAs associated with
that route policy will have P bit cleared,
w…
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.35
rcIpRoutePolicyMatchVrf
An array used to identify which source VRFs have leaked
routes to the local VRF
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2272.1.8.100.13.1.36
rcIpRoutePolicyMatchExtCommunity
Filter incoming/outgoing updates based on communities
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.37
rcIpRoutePolicySetExtCommunity
Set Extended-community string.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.13.1.38
rcIpRoutePolicySetExtCommunityMode
This value can be either additive, unchanged or overwrite.
Enumerationr/w
Enumerated Values:
0append
1unchanged
2overwrite
 .1.3.6.1.4.1.2272.1.8.100.13.1.39
rcIpRoutePolicyMatchLocalPref
Match Local Prefix value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.40
rcIpRoutePolicyMatchIpRouteDest
to match route destination, one can specify one
or more prefix list name(s) or id(s) separated by comma.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.41
rcIpRoutePolicySetLevel
Level of the Ip routing policy
Enumerationr/w
Enumerated Values:
1level1
2level2
 .1.3.6.1.4.1.2272.1.8.100.13.1.42
rcIpRoutePolicyIpv6SetNextHop
Address of the ipv6 next hop router. Ignored for
DVMRP routes.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.8.100.13.1.43

rcIpRedistributeTable

table
.1.3.6.1.4.1.2272.1.8.100.16 · 1 row entry · 13 columns
Open in standard view 
IP Redistribute table
rcIpRedistributeEntry entry .1.3.6.1.4.1.2272.1.8.100.16.1
An entry of Ip Redistribute Table.
Indexes
rcIpRedistributeProtocol rcIpRedistributeRouteSource
Column Syntax OID
rcIpRedistributeProtocol
Protocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.
Enumeration
Enumerated Values:
1ospf
2bgp
3isis
4ospfv3
5vrf-ext
 .1.3.6.1.4.1.2272.1.8.100.16.1.1
rcIpRedistributeRouteSource
equivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.
Enumeration
Enumerated Values:
1direct
2static
3rip
4ospf
5bgp
6extranet
10v6direct
11v6static
12ospfv3
13isis
 .1.3.6.1.4.1.2272.1.8.100.16.1.2
rcIpRedistributeEnable
Enable/Disable. By default this is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.16.1.3
rcIpRedistributeMetric
value of the metric to be announced in the
advertisment
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.16.1.4
rcIpRedistributeMetricType
specifies the type of the metric type, useful
for OSPF and BGP only.
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.2272.1.8.100.16.1.5
rcIpRedistributeMatchRouteType
used to filter a route based on the route type.
applicable to BGP.
Enumerationr/w
Enumerated Values:
1internal
2external1
3external2
 .1.3.6.1.4.1.2272.1.8.100.16.1.6
rcIpRedistributeSetTag
Tag value to be set in the advertisment.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.7
rcIpRedistributeSubnets
applicable to OSPF only. Indicates that all the
subnets need to be advertised individually.
Enumerationr/w
Enumerated Values:
1allow
2supress
 .1.3.6.1.4.1.2272.1.8.100.16.1.8
rcIpRedistributeRoutePolicy
specify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map name
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.16.1.9
rcIpRedistributeASNumber
Autonomous system number. Used only for the
BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.10
rcIpRedistributeWeight
used only for the BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.11
rcIpRedistributeDefaultOriginate
indicates the given protocol will
originate/advertise a default route.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.12
rcIpRedistributeRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.16.1.13

rcIpOspfInFilterTable

table
.1.3.6.1.4.1.2272.1.8.100.19 · 1 row entry · 5 columns
Open in standard view 
IP Ospf In Filter table
rcIpOspfInFilterEntry entry .1.3.6.1.4.1.2272.1.8.100.19.1
An entry of Ip Ospf In Filter Table.
Indexes
rcIpOspfInFilterAdvertisingRtr
Column Syntax OID
rcIpOspfInFilterAdvertisingRtr SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.19.1.1
rcIpOspfInFilterEnable
IfIndex
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.19.1.2
rcIpOspfInFilterMetricType Enumerationr/w
Enumerated Values:
1type1
2type2
3any
 .1.3.6.1.4.1.2272.1.8.100.19.1.3
rcIpOspfInFilterPolicyName RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.19.1.4
rcIpOspfInFilterRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.19.1.5

rcIpRoutePrefTable

table
.1.3.6.1.4.1.2272.1.8.100.21 · 1 row entry · 3 columns
Open in standard view 
IP Route Pref table
rcIpRoutePrefEntry entry .1.3.6.1.4.1.2272.1.8.100.21.1
An entry of Ip Route Pref Table.
Indexes
rcIpRoutePrefProtocol
Column Syntax OID
rcIpRoutePrefProtocol
Protocol
Enumeration
Enumerated Values:
1local
2static
3mpls
4ospfIntra
5ospfInter
6isisLevel1
7isisLevel2
8ebgp
9rip
10ospfExternal1
11ospfExternal2
12ibgp
13staticv6
14ospfv3Intra
15ospfv3Inter
16ospfv3External1
17ospfv3External2
18spbmLevel1
 .1.3.6.1.4.1.2272.1.8.100.21.1.1
rcIpRoutePrefDefault
Shows the default preference value for the given
protocol.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.21.1.2
rcIpRoutePrefConfigured
This value is configurable by the user
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.21.1.3

rcIpRedistributeInterVrfTable

table
.1.3.6.1.4.1.2272.1.8.100.22 · 1 row entry · 15 columns
Open in standard view 
IP Redistribute table for Inter-VRFs
rcIpRedistributeInterVrfEntry entry .1.3.6.1.4.1.2272.1.8.100.22.1
An entry of Ip Redistribute Table.(new)
Indexes
rcIpRedistributeInterVrfDstVrfId rcIpRedistributeInterVrfProtocol rcIpRedistributeInterVrfSrcVrfId rcIpRedistributeInterVrfRouteSource
Column Syntax OID
rcIpRedistributeInterVrfDstVrfId
dst VRF id used in the redistribution
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.100.22.1.1
rcIpRedistributeInterVrfProtocol
Protocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.
Enumeration
Enumerated Values:
1ospf
2bgp
3isis
4vrf-ext
5extranet
6rip
10ospfv3
 .1.3.6.1.4.1.2272.1.8.100.22.1.2
rcIpRedistributeInterVrfSrcVrfId
src VRF id used in the redistribution
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.100.22.1.3
rcIpRedistributeInterVrfRouteSource
equivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.
Enumeration
Enumerated Values:
1direct
2static
3rip
4ospf
5bgp
6extranet
10v6direct
11v6static
12ospfv3
13isis
 .1.3.6.1.4.1.2272.1.8.100.22.1.4
rcIpRedistributeInterVrfEnable
Enable/Disable. By default this is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.22.1.5
rcIpRedistributeInterVrfMetric
value of the metric to be announced in the
advertisment
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.22.1.6
rcIpRedistributeInterVrfMetricType
specifies the type of the metric type, useful
for OSPF and BGP only.
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.2272.1.8.100.22.1.7
rcIpRedistributeInterVrfMatchRouteType
used to filter a route based on the route type.
applicable to BGP.
Enumerationr/w
Enumerated Values:
1internal
2external1
3external2
 .1.3.6.1.4.1.2272.1.8.100.22.1.8
rcIpRedistributeInterVrfSetTag
Tag value to be set in the advertisment.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.9
rcIpRedistributeInterVrfSubnets
applicable to OSPF only. Indicates that all the
subnets need to be advertised individually.
Enumerationr/w
Enumerated Values:
1allow
2suppress
 .1.3.6.1.4.1.2272.1.8.100.22.1.10
rcIpRedistributeInterVrfRoutePolicy
specify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map name
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.8.100.22.1.11
rcIpRedistributeInterVrfASNumber
Autonomous system number. Used only for the
BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.12
rcIpRedistributeInterVrfWeight
used only for the BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.13
rcIpRedistributeInterVrfDefaultOriginate
indicates the given protocol will
originate/advertise a default route.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.14
rcIpRedistributeInterVrfRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.22.1.15

rcIpExtCommunityAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.24 · 1 row entry · 12 columns
Open in standard view 
IP Extended Community Access List table.
rcIpExtCommunityAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.24.1
An entry of Ip Extended Community Access List Table.
Indexes
rcIpExtCommunityAccessListId rcIpExtCommunityAccessListMemberId
Column Syntax OID
rcIpExtCommunityAccessListId
IP extended Community Access List Id
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.24.1.1
rcIpExtCommunityAccessListMemberId
Member Id for the extended-community list to be added
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.2
rcIpExtCommunityAccessListRTType
The route target Type for IP Extended Community rule in the list
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.100.24.1.3
rcIpExtCommunityAccessListRTAddress
Extended community Ip address for the route-target type entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.24.1.4
rcIpExtCommunityAccessListRTAsNumber
Extended community Asnumber for the route-target type entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.5
rcIpExtCommunityAccessListRTAssignedNum
Extended community assigned number for the route-target type entry.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.24.1.6
rcIpExtCommunityAccessListSooType
The site of origin Type for IP Extended Community Access List
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.100.24.1.7
rcIpExtCommunityAccessListSooAddress
Extended community Ip address for the site-of-origin type of entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.24.1.8
rcIpExtCommunityAccessListSooAsNumber
Extended community AsNumber for the site-of-origin type of entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.9
rcIpExtCommunityAccessListSooAssignedNum
Extended community assigned number for the site-of-origin type of entry.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.24.1.10
rcIpExtCommunityAccessListVrfId
VrfId for the extended-community Access list.
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.100.24.1.11
rcIpExtCommunityAccessListRowStatus
IP Ext Community Table Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.24.1.12

rcIpPrefixListNameTable

table
.1.3.6.1.4.1.2272.1.8.100.27 · 1 row entry · 2 columns
Open in standard view 
Prefix List Name table
rcIpPrefixListNameEntry entry .1.3.6.1.4.1.2272.1.8.100.27.1
An entry of Prefix List Name Table.
Indexes
rcIpPrefixListNameId
Column Syntax OID
rcIpPrefixListNameId
list id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.27.1.1
rcIpPrefixListNameName
list name
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.27.1.2

rcIpRoutePolicyNameTable

table
.1.3.6.1.4.1.2272.1.8.100.28 · 1 row entry · 3 columns
Open in standard view 
Route Policy Name table for all VRFs
rcIpRoutePolicyNameEntry entry .1.3.6.1.4.1.2272.1.8.100.28.1
An entry of Route Policy Name Table.
Indexes
rcIpRoutePolicyNameVrfId rcIpRoutePolicyNameId
Column Syntax OID
rcIpRoutePolicyNameVrfId
route policy vrfId
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.100.28.1.1
rcIpRoutePolicyNameId
route policy id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.28.1.2
rcIpRoutePolicyNameName
route policy name
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.28.1.3

rcIpBgpAggregateTable

table deprecated
.1.3.6.1.4.1.2272.1.8.101.3 · 1 row entry · 8 columns
Open in standard view 
To specify the list of aggregate prefixes to be
created  by the BGP routing process and the options
to be used while aggregating.
rcIpBgpAggregateEntry entry .1.3.6.1.4.1.2272.1.8.101.3.1
An entry of rcIpBgp Aggregate Address In Table.
Indexes
rcIpBgpAggregateAddress rcIpBgpAggregateMask
Column Syntax OID
rcIpBgpAggregateAddress
Prefix to create an aggregate address in BGP routing table.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.3.1.1
rcIpBgpAggregateMask
Mask for the aggregrate
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.3.1.2
rcIpBgpAggregateAsSetGenerate
Enable Generates autonomous system set path
information.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.3.1.3
rcIpBgpAggregateSummaryOnly
Filters all more specific routes from updates.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.3.1.4
rcIpBgpAggregateSuppressPolicy
Name of route policy used to select the
routes to be suppressed.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.3.1.5
rcIpBgpAggregateAdvertisePolicy
Name of route policy used to select the
routes to create AS-SET origin communities.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.3.1.6
rcIpBgpAggregateAttributePolicy
Name of route policy used to set the
attribute of the aggregate route.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.3.1.7
rcIpBgpAggregateRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.3.1.8

rcIpBgpNetworkTable

table deprecated
.1.3.6.1.4.1.2272.1.8.101.7 · 1 row entry · 4 columns
Open in standard view 
The networks in this table are either static/directly
connected or learned routes. Bgp advertises these
network provided they are reachable and are in the IP
routing table
rcIpBgpNetworkEntry entry .1.3.6.1.4.1.2272.1.8.101.7.1
An entry In NetworkTable.
Indexes
rcIpBgpNetworkAddr rcIpBgpNetworkMask
Column Syntax OID
rcIpBgpNetworkAddr
Network prefix that BGP will advertise.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.7.1.1
rcIpBgpNetworkMask
Network mask
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.7.1.2
rcIpBgpNetworkRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.7.1.3
rcIpBgpNetworkMetric
Value of the metric to be used while sending
an update for the routes from the network table.
Indicates to set the MED value for the routes
advertised to ebgp peers.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.7.1.4

rcIpBgpPeerTable

table deprecated
.1.3.6.1.4.1.2272.1.8.101.9 · 1 row entry · 33 columns
Open in standard view 
IP BGP Peer table
rcIpBgpPeerEntry entry .1.3.6.1.4.1.2272.1.8.101.9.1
An entry of Ip rcIpBgp Peer Table.
Indexes
rcIpBgpPeerIpAddress
Column Syntax OID
rcIpBgpPeerEnable
Enable/Disable: controls whether the peer connection is enabled
or disabled
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.8.101.9.1.1
rcIpBgpPeerIpAddress
The Ip address of this peer
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.9.1.2
rcIpBgpPeerRemoteAs
Remote Autonomous system number of this peer
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.9.1.3
rcIpBgpPeerGroupName
Peer group name to which this peer belongs (optional)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.9.1.4
rcIpBgpPeerDefaultOriginate
To allow a BGP speaker (the local router) to send
the default route 0.0.0.0 to a neighbor for use as
a default route
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.5
rcIpBgpPeerEbgpMultiHop
To accept and attempt BGP connections to external
peers residing on networks that are not directly
connected
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.6
rcIpBgpPeerAdvertisementInterval
To set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 5
to 120.
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.2272.1.8.101.9.1.7
rcIpBgpPeerPassword
To enable MD5 authentication on a TCP connection
between two BGP peers Case-sensitive password of
up to 80 character
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.8.101.9.1.8
rcIpBgpPeerWeight
To assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.9.1.9
rcIpBgpPeerMaxPrefix
Sets a limit on the number of routes that will be
accepted from a neighbor. A value of zero indicates no
limit
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.101.9.1.10
rcIpBgpPeerNextHopSelf
Set NextHop Attribute to local router address before
sending updates to remote peer
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.9.1.11
rcIpBgpPeerRoutePolicyIn
Route Policy Name that will be applied to all networks
learned from this peer
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.9.1.12
rcIpBgpPeerRoutePolicyOut
Route policy name that will be applied to all outgoing
updates
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.9.1.13
rcIpBgpPeerRouteReflectorClient
Indicates whether this peer is a route reflector client.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.9.1.14
rcIpBgpPeerSoftReconfigurationIn
If Peer soft reconfiguration is enabled in the in-bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored…
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.15
rcIpBgpPeerSoftReconfiguration
If rcIpBgpPeerSoftReconfigurationIn is enabled in the
in-bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerSoftReconfiguration to in(1). Se…
Enumerationr/w
Enumerated Values:
1in
2out
3none
 .1.3.6.1.4.1.2272.1.8.101.9.1.16
rcIpBgpPeerRemovePrivateAs
Enable and disable private AS number from being
stripped when sending an update
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.17
rcIpBgpPeerRowStatus
Used to create/delete entries in the Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.9.1.18
rcIpBgpPeerMD5Authentication
Enable and Disable MD5 authentication
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.19
rcIpBgpPeerDebugMask
value is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
…
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2272.1.8.101.9.1.20
rcIpBgpPeerSendCommunity EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.21
rcIpBgpPeerUpdateSourceInterface
The IP address to be used for Circuitless IP.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.9.1.22
rcIpBgpPeerState
The BGP peer connection state.
Enumeration
Enumerated Values:
1idle
2connect
3active
4opensent
5openconfirm
6established
 .1.3.6.1.4.1.2272.1.8.101.9.1.25
rcIpBgpPeerLastError
The last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.2272.1.8.101.9.1.26
rcIpBgpPeerVpnv4Address
The vpnv4 routes specified.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.27
rcIpBgpPeerIpvpnLiteCap
The IPVPN-lite capability can be enabled or disabled on
the bgp neighbor peer.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.28
rcIpBgpPeerSooAddress
The site-of-origin ip address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.9.1.29
rcIpBgpPeerSooAsNumber
The asnum for the site-of-origin for bgp peer.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.9.1.30
rcIpBgpPeerSooAssignedNum
The Assigned number required along with asnum or
address to configure the site-of-origin for bgp peer.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.101.9.1.31
rcIpBgpPeerSooType
The soo type can be asnum or ipaddress.
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.101.9.1.32
rcIpBgpPeerRouteRefresh
Route refresh for bgp peer.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.33
rcIpBgpPeerAsOverride
The AS Override value can be enabled or disabled for bgp peer.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.9.1.34
rcIpBgpPeerAllowAsIn
The number of as-in allowed for bgp peer
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2272.1.8.101.9.1.35

rcIpBgpPeerGroupTable

table
.1.3.6.1.4.1.2272.1.8.101.11 · 1 row entry · 34 columns
Open in standard view 
IP rcIpBgp Peer Group table. This table contains rows
which are template configuration parameters which are
shared by a group of peers. Peers belonging to the
same group will refer to the same row in this table
using a peer group name
rcIpBgpPeerGroupEntry entry .1.3.6.1.4.1.2272.1.8.101.11.1
An entry of Ip rcIpBgp Peer Group Table.
Indexes
rcIpBgpPeerGroupIndex
Column Syntax OID
rcIpBgpPeerGroupEnable
Allows disabling a group of peers
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.1
rcIpBgpPeerGroupIndex
Index in to the Peer Group Table
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.101.11.1.2
rcIpBgpPeerGroupGroupName
Name of the BGP peer group to which this neighbor belong
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.11.1.3
rcIpBgpPeerGroupRemoteAs
Remote Autonomous system number of this peer group
(optional)
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.11.1.4
rcIpBgpPeerGroupDefaultOriginate
Enabling this attribute allows a BGP speaker
(the local router) to send the default route 0.0.0.0 to
the group of neighbors for use as a default route.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.5
rcIpBgpPeerGroupEbgpMultiHop
To accept and attempt BGP connections to external
peers residing on networks that are not directly
connected
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.6
rcIpBgpPeerGroupAdvertisementInterval
To set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 1
to 120.
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.2272.1.8.101.11.1.7
rcIpBgpPeerGroupKeepAlive
To set the time interval in seconds between the sending
of BGP keep alive messages to remote peers.
Integer32r/w
Constraints:
range: 0-21845
 .1.3.6.1.4.1.2272.1.8.101.11.1.8
rcIpBgpPeerGroupHoldTime
To configure the hold time for the group of peers in
seconds. Usually set to three times the value of the
Keepalive time
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.11.1.9
rcIpBgpPeerGroupWeight
To assign an absolute weight to a BGP network.
Absolute weight, or importance.
It can be an integer from 0 to 65535.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.11.1.10
rcIpBgpPeerGroupMaxPrefix
Sets a limit on the number of routes that will be
accepted from this group of neighbors. A value of zero
indicates no limit
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.101.11.1.11
rcIpBgpPeerGroupNextHopSelf
Set NextHop Attribute to local router address before
sending updates to remote peers
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.11.1.12
rcIpBgpPeerGroupRoutePolicyIn
Route Policy Name that will be applied to all networks
learned from this group of peers
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.11.1.13
rcIpBgpPeerGroupRoutePolicyOut
Route policy name that will be applied to all
outgoing updates to this group of peers
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.11.1.14
rcIpBgpPeerGroupRouteReflectorClient
Indicates whether this group of peers is a route reflector client.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.11.1.15
rcIpBgpPeerGroupSoftReconfigurationIn
If Peer soft reconfiguration is enabled in the in bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored…
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.16
rcIpBgpPeerGroupSoftReconfiguration
If Peer soft reconfiguration-in is enabled in the in
bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerGroupSoftReconfiguration to in(1).
S…
Enumerationr/w
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.2272.1.8.101.11.1.17
rcIpBgpPeerGroupPassword
To enable MD5 authentication on TCP connections
between this local speaker and this group of BGP peers.
Case-sensitive password of up to 80 character
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.8.101.11.1.18
rcIpBgpPeerGroupRemovePrivateAs
Enable and disable private AS number from being
stripped when sending an update
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.19
rcIpBgpPeerGroupRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.11.1.20
rcIpBgpPeerGroupMD5Authentication
Enable and Disable MD5 authentication
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.21
rcIpBgpPeerGroupSendCommunity
Enables or disables sending the update
message community attribute to the specified
peer.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.22
rcIpBgpPeerGroupUpdateSourceInterface
The IP address to used for circuitless IP for this peer group.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.11.1.23
rcIpBgpPeerGroupVpnv4Address
The vpnv4 routes specified.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.24
rcIpBgpPeerGroupIpvpnLiteCap
The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.25
rcIpBgpPeerGroupRouteRefresh
Route refresh for bgp peer group.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.30
rcIpBgpPeerGroupAsOverride
The AS Override value can be enabled or disabled for bgp peer group.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.31
rcIpBgpPeerGroupAllowAsIn
The number of as-in allowed for bgp peer group.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2272.1.8.101.11.1.32
rcIpBgpPeerGroupDefaultOriginateIpv6
Enabling this attribute allows a BGP speaker
(the local router) to send the default route to
the group of neighbors for use as a default
route.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.11.1.33
rcIpBgpPeerGroupAfUpdateSourceInterfaceType
The Inet address type used for circuitless IP
for this peer group.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.11.1.34
rcIpBgpPeerGroupAfUpdateSourceInterface
The Inet address to used for circuitless IP for
this peer group.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.11.1.35
rcIpBgpPeerGroupIpv6Cap
The ipv6 capability can be enabled or disabled
on the bgp neighbor peer group.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.101.11.1.36
rcIpBgpPeerGroupIpv6RoutePolicyIn
Ipv6 Route Policy Name that will be applied to all
networks learned from this group of peers
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.11.1.37
rcIpBgpPeerGroupIpv6RoutePolicyOut
Ipv6 Route policy name that will be applied to all
outgoing updates to this group of peers
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.11.1.38

rcIpBgpRcvdDampenedPathAttrTable

table
.1.3.6.1.4.1.2272.1.8.101.13 · 1 row entry · 8 columns
Open in standard view 
This table contains info about paths to destination
networks received from all BGP-4 peers
rcIpBgpDampenedPathAttrEntry entry .1.3.6.1.4.1.2272.1.8.101.13.1
Information about a path to a networks
Indexes
rcIpBgpPathAttrIpAddrPrefix rcIpBgpPathAttrIpAddrPrefixLen rcIpBgpPathAttrPeer
Column Syntax OID
rcIpBgpPathAttrPeer
The IP address of the peer where the path info was
learned
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.13.1.1
rcIpBgpPathAttrIpAddrPrefixLen
Length in bits of the IP address prefix in the network
Layer Reachablity Information field.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.101.13.1.2
rcIpBgpPathAttrIpAddrPrefix
An Ip address prefix in the NLRI Information field.
This object is an IP address containing the prefix
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
are zeroed.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.13.1.3
rcIpBgpPathAttrFlapPenalty
Penalty value based on number of route flaps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.101.13.1.4
rcIpBgpPathAttrFlapCount
Number of times a route flapped since the last time the
penalty was reset to zero
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.101.13.1.5
rcIpBgpPathAttrRouteDampened
Shows whether this route is currently suppressed from
being announced
Enumeration
Enumerated Values:
1announced
2suppressed
 .1.3.6.1.4.1.2272.1.8.101.13.1.6
rcIpBgpPathAttrReuseTime
Re use time is the system configured time for
route reuse
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.101.13.1.7
rcIpBgpPathAttrReuseTimeRemain
Re use time Remain is the number of seconds before the route will be reused
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.101.13.1.8

rcIpBgp4PathAttrTable

table
.1.3.6.1.4.1.2272.1.8.101.15 · 1 row entry · 6 columns
Open in standard view 
This table contains info about paths to destination
networks received from all BGP-4 peers
rcIpBgp4PathAttrEntry entry .1.3.6.1.4.1.2272.1.8.101.15.1
Indexes
rcIpBgp4PathAttrIpAddrPrefix rcIpBgp4PathAttrIpAddrPrefixLen rcIpBgp4PathAttrPeer
Column Syntax OID
rcIpBgp4PathAttrPeer
The IP address of the peer where the path info was
learned
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.15.1.1
rcIpBgp4PathAttrIpAddrPrefixLen
Length in bits of the IP address prefix in the network
Layer Reachablity Information field.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.101.15.1.2
rcIpBgp4PathAttrIpAddrPrefix
An Ip address prefix in the NLRI Information field.
This object is an IP address containing the prefix
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
are zeroed.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.15.1.3
rcIpBgp4PathAttrCommunities
The string represents community path attributes as <length,value>
The length is a 1-octet field containing the numbner of community
numbers in the value field.The value field contains one or more
Community numbers,each …
OctetString
Constraints:
range: 255-255
 .1.3.6.1.4.1.2272.1.8.101.15.1.4
rcIpBgp4PathAttrOriginateId
The IP address of the route who originates the routes
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.15.1.5
rcIpBgp4PathAttrClusterId
The string represents Cluster Id path attributes as <length,value>
The length is a 1-octet field containing the number of Cluster Id
numbers in the value field.The value field contains one or more
Cluster Id numbers,eac…
OctetString
Constraints:
range: 255-255
 .1.3.6.1.4.1.2272.1.8.101.15.1.6

rcIpBgpExtAggregateAfTable

table
.1.3.6.1.4.1.2272.1.8.101.16.2 · 1 row entry · 9 columns
Open in standard view 
Replaces rcIpBgpAggregateTable.
To specify the list of ipv4 and ipv6 aggregate
prefixes to be created  by the BGP routing process
and the options to be used while aggregating.
rcIpBgpExtAggregateAfEntry entry .1.3.6.1.4.1.2272.1.8.101.16.2.1
An entry of v4/v6 aggregate prefix to be created by
BGP routing process and the options to be used
while aggregating.
Indexes
rcIpBgpExtAggregateAfAddressType rcIpBgpExtAggregateAfAddress rcIpBgpExtAggregateAfPrefixLen
Column Syntax OID
rcIpBgpExtAggregateAfAddressType
Inet Address Type of aggregate address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.1
rcIpBgpExtAggregateAfAddress
V4 or V6 Prefix to create an aggregate address in BGP
routing table.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.2
rcIpBgpExtAggregateAfPrefixLen
Prefix length of the aggregate inet address
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.3
rcIpBgpExtAggregateAfAsSetGenerate
Enable Generates autonomous system set path
information.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.4
rcIpBgpExtAggregateAfSummaryOnly
Filters all more specific routes from updates.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.5
rcIpBgpExtAggregateAfSuppressPolicy
Name of route policy used to select the
routes to be suppressed.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.6
rcIpBgpExtAggregateAfAdvertisePolicy
Name of route policy used to select the
routes to create AS-SET origin communities.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.7
rcIpBgpExtAggregateAfAttributePolicy
Name of route policy used to set the
attribute of the aggregate route.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.8
rcIpBgpExtAggregateAfRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.16.2.1.9

rcIpBgpExtNetworkAfTable

table
.1.3.6.1.4.1.2272.1.8.101.16.4 · 1 row entry · 5 columns
Open in standard view 
This table replaces rcIpBgpNetworkTable.
This table supports V4 and V6 BGP networks.
The networks in this table are either
static/directly connected or learned routes.
Bgp advertises these network provided they are
reachable and are in the IP routing table
rcIpBgpExtNetworkAfEntry entry .1.3.6.1.4.1.2272.1.8.101.16.4.1
An entry in bgp NetworkTable.
Indexes
rcIpBgpExtNetworkAfAddrType rcIpBgpExtNetworkAfAddr rcIpBgpExtNetworkAfPrefixLen
Column Syntax OID
rcIpBgpExtNetworkAfAddrType
Inet address type of the Network prefix that BGP will
advertise.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.16.4.1.1
rcIpBgpExtNetworkAfAddr
v4/v6 Network prefix that BGP will advertise.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.16.4.1.2
rcIpBgpExtNetworkAfPrefixLen
Prefix length of the v4/v6 bgp network address
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.8.101.16.4.1.3
rcIpBgpExtNetworkAfMetric
Value of the metric to be used while sending
an update for the routes from the network table.
Indicates to set the MED value for the routes
advertised to ebgp Peers.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.16.4.1.4
rcIpBgpExtNetworkAfRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.16.4.1.5

rcIpBgpExtPeerAfTable

table
.1.3.6.1.4.1.2272.1.8.101.16.6 · 1 row entry · 38 columns
Open in standard view 
Extension to the BGP peer table.  This table contains,
one entry per BGP peer, information about the connections
with BGP Peers, which is not supported by the standard
MIB draft. This table replaces rcIpBgpPeerTable.
rcIpBgpExtPeerAfEntry entry .1.3.6.1.4.1.2272.1.8.101.16.6.1
Entry containing miscelleneous information (info not
present in the standard BGP peer table) about the
connection with a remote BGP peer .
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpExtPeerAfGroupName
Peer group name to which this peer belongs (optional)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.1
rcIpBgpExtPeerAfDefaultOriginate
To allow a BGP speaker (the local router) to
send the default route 0.0.0.0 to a neighbor for
use as a default route
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.2
rcIpBgpExtPeerAfDefaultOriginateIpv6
To allow a BGP speaker (the local router) to
Send the default ipv6 route to a neighbor for
use as a default route
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.3
rcIpBgpExtPeerAfEbgpMultiHop
To accept and attempt BGP connections to
external peers residing on networks that are not
directly connected
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.4
rcIpBgpExtPeerAfAdvertisementInterval
To set the minimum interval between the sending
Of BGP routing updates Time in seconds. Integer
from 5 to 120.
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.5
rcIpBgpExtPeerAfPassword
To enable MD5 authentication on a TCP connection
between two BGP Peers Case-sensitive password of
up to 80 character
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.6
rcIpBgpExtPeerAfWeight
To assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.7
rcIpBgpExtPeerAfMaxPrefix
Sets a limit on the number of routes that will
be accepted from a neighbor. A value of zero
indicates no limit
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.8
rcIpBgpExtPeerAfNextHopSelf
Set NextHop Attribute to local router address
Before sending updates to remote peer
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.9
rcIpBgpExtPeerAfRoutePolicyIn
Route Policy Name that will be applied to all
Networks learned from this peer
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.10
rcIpBgpExtPeerAfRoutePolicyOut
Route policy name that will be applied to all
outgoing updates
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.11
rcIpBgpExtPeerAfRouteReflectorClient
Indicates whether this peer is a route reflector
client.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.12
rcIpBgpExtPeerAfSoftReconfigurationIn
If Peer soft reconfiguration is enabled in the
in-bound direction, policy can be changed and
routes can re-learned without having to reset
the bgp connection. Enabling soft reconfig-in
causes all bgp routes to be stor…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.13
rcIpBgpExtPeerAfSoftReconfiguration
If rcIpBgpExtPeerAfSoftReconfigurationIn is enabled
in the in-bound direction, policy can be changed
and routes can re-learned without having to
reset the bgp connection by setting
rcIpBgpExtPeerAfSoftReconfiguration…
Enumerationr/w
Enumerated Values:
1in
2out
3none
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.14
rcIpBgpExtPeerAfRemovePrivateAs
Enable and disable private AS number from being
stripped when sending an update
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.15
rcIpBgpExtPeerAfMD5Authentication
Enable and Disable MD5 authentication
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.16
rcIpBgpExtPeerAfDebugMask
value is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
…
Integer32r/w
Constraints:
range: 0-511
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.17
rcIpBgpExtPeerAfSendCommunity
Enables or disables sending the update message
community attribute to the specified peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.18
rcIpBgpExtPeerAfUpdateSourceInterface
The Inet address to be used for Circuitless IP.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.19
rcIpBgpExtPeerAfVpnv4Address
The vpnv4 routes specified.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.20
rcIpBgpExtPeerAfIpv6Cap
The ipv6 capability can be enabled or
disabled on the bgp neighbor peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.21
rcIpBgpExtPeerAfIpvpnLiteCap
The IPVPN-lite capability can be enabled or
disabled on the bgp neighbor peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.22
rcIpBgpExtPeerAfSooAddress
The site-of-origin ip address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.23
rcIpBgpExtPeerAfSooAsNumber
The asnum for the site-of-origin for bgp peer.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.24
rcIpBgpExtPeerAfSooAssignedNum
The Assigned number required along with asnum or
address to configure the site-of-origin for bgp
peer.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.25
rcIpBgpExtPeerAfSooType
The soo type can be asnum or ipaddress.
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.26
rcIpBgpExtPeerAfRouteRefresh
Route refresh for bgp peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.27
rcIpBgpExtPeerAfAsOverride
The AS Override value can be enabled or disabled
for bgp peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.28
rcIpBgpExtPeerAfAllowAsIn
The number of as-in allowed for bgp peer.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.29
rcIpBgpExtPeerAfIpv6RoutePolicyIn
Ipv6 Route Policy Name that will be applied to all
Networks learned from this peer
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.30
rcIpBgpExtPeerAfIpv6RoutePolicyOut
Ipv6 Route policy name that will be applied to all
outgoing updates
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.31
rcIpBgpExtPeerAfEnable
Used to enable/disable bgp+ peer
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.32
rcIpBgpExtPeerAfRemoteAs
Used to manually configure the remote as of the bgp+
peer.
INET-ADDRESS-MIBInetAutonomousSystemNumberr/w
Textual Convention: INET-ADDRESS-MIBInetAutonomousSystemNumber Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.33
rcIpBgpExtPeerAfConnectRetryInterval
Used to configure the ConnectRetry timer for the
BGP+ peer.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.34
rcIpBgpExtPeerAfHoldTimeConfigured
Used to configure the Hold Timer for the BGP+ peer.
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 3-65535
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.35
rcIpBgpExtPeerAfKeepAliveConfigured
Used to configure the KeepAlive Timer for the BGP+ peer.
secondsUnsigned32r/w
Constraints:
range: 0-21845
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.36
rcIpBgpExtPeerAfRowStatus
Used to create/delete entries in the Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.37
rcIpBgpExtPeerAfNewRemoteAs
Remote Autonomous system number of this peer
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.2272.1.8.101.16.6.1.38

rcIpBgpExtAfPathAttrTable

table
.1.3.6.1.4.1.2272.1.8.101.16.7 · 1 row entry · 4 columns
Open in standard view 
Extension to rcIpBgpTmpAfPathAttrTable. This table contains
info about additional BGP path attributes not covered in 
rcIpBgpTmpAfPathAttrTable.
rcIpBgpExtAfPathAttrEntry entry .1.3.6.1.4.1.2272.1.8.101.16.7.1
Each entry contains data about additional path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpExtAfPathAttrUnknown
Replaces bgp4PathAttrUnknown.
One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.16.7.1.1
rcIpBgpExtAfPathAttrCommunities
The string represents BGP+ community path attributes as
<length ,value>. The length is a 1-octet field containing the
numbner of community numbers in the value field.The value field
contains one or more Community num…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.16.7.1.2
rcIpBgpExtAfPathAttrOriginateId
In a BGP+ context, the IP address of the router which
originates the routes.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.16.7.1.3
rcIpBgpExtAfPathAttrClusterId
The string represents BGP+ Cluster Id path attributes as
<length,value>. The length is a 1-octet field containing
the number of Cluster Id numbers in the value field. The
value field contains one or more Cluster Id n…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.101.16.7.1.4

rcIpBgpTmpPeerAfTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.1 · 1 row entry · 14 columns
Open in standard view 
BGP peer table.  This table contains, one entry per BGP
peer, information about the connections with BGP peers.
          
This table replaces bgpPeerTable.
rcIpBgpTmpPeerAfEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.1.1
Entry containing information about the connection with
a remote BGP peer.
Indexes
rcIpBgpTmpPeerAfInstance rcIpBgpTmpPeerAfLocalAddrType rcIpBgpTmpPeerAfLocalAddr rcIpBgpTmpPeerAfRemoteAddrType rcIpBgpTmpPeerAfRemoteAddr
Column Syntax OID
rcIpBgpTmpPeerAfInstance
The routing instance index.

Some BGP implementations permit the creation of
multiple instances of a BGP routing process. An
example includes routers running BGP/MPLS IP Virtual
Private Networks.
…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.1
rcIpBgpTmpPeerAfLocalAddrType
The address family of the local end of the peering
session.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.2
rcIpBgpTmpPeerAfLocalAddr
The local IP address of this entry's BGP connection.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.3
rcIpBgpTmpPeerAfRemoteAddrType
The address family of the remote end of the peering
session.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.4
rcIpBgpTmpPeerAfRemoteAddr
The remote IP address of this entry's BGP peer.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.5
rcIpBgpTmpPeerAfLocalPort
The local port for the TCP connection between the BGP
peers.
INET-ADDRESS-MIBInetPortNumber
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.6
rcIpBgpTmpPeerAfLocalAs
Some implementations of BGP can represent themselves
as multiple ASes. This is the AS that this peering
session is representing itself as to the remote peer.
INET-ADDRESS-MIBInetAutonomousSystemNumber
Textual Convention: INET-ADDRESS-MIBInetAutonomousSystemNumber Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.7
rcIpBgpTmpPeerAfRemotePort
The remote port for the TCP connection between the BGP
peers.

Note that the objects rcIpBgpTmpPeerAfLocalAddr,
rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemoteAddr and
rcIpBgpTmpPeerAfRemotePort provide …
INET-ADDRESS-MIBInetPortNumber
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.8
rcIpBgpTmpPeerAfRemoteAs
The remote autonomous system number received in the BGP
OPEN message.
INET-ADDRESS-MIBInetAutonomousSystemNumber
Textual Convention: INET-ADDRESS-MIBInetAutonomousSystemNumber Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.9
rcIpBgpTmpPeerAfIdentifier
The BGP Identifier of this entry's remote BGP peer.

This entry should be 0.0.0.0 unless the
rcIpBgpTmpPeerAfPeerState is in the openconfirm or the
established state.
RcIpBgpTmpIdentifierTC
Textual Convention: RcIpBgpTmpIdentifierTC OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.10
rcIpBgpTmpPeerAfAdminStatus
Whether or not the BGP FSM for this remote peer is
halted or running. The BGP FSM for a remote peer is
halted after processing a Stop event. Likewise, it is
in the running state after a Start event.

The r…
Enumeration
Enumerated Values:
1halted
2running
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.11
rcIpBgpTmpPeerAfPeerState
The BGP peer connection state.
Enumeration
Enumerated Values:
1idle
2connect
3active
4opensent
5openconfirm
6established
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.12
rcIpBgpTmpPeerAfConfiguredVersion
The configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.13
rcIpBgpTmpPeerAfNegotiatedVersion
The negotiated version of BGP running between
the two peers.

This entry MUST be zero (0) unless the
rcIpBgpTmpPeerAfState is in the openconfirm or the
established state.

Note that legal val…
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.8.101.17.10.1.1.14

rcIpBgpTmpPeerAfErrorsTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.2.1 · 1 row entry · 10 columns
Open in standard view 
On a per-peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer
exists in this table, then no such errors have been
observed, reported, and recorded on the session.
rcIpBgpTmpPeerAfErrorsEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1
Each entry contains information about errors sent
and received for a particular BGP peer.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpTmpPeerAfLastErrorCodeReceived
The last error code received from this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.1
rcIpBgpTmpPeerAfLastErrorSubCodeReceived
The last subcode received from this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.2
rcIpBgpTmpPeerAfLastErrorReceivedTime
The timestamp that the last NOTIFICATION was received from
this peer.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.3
rcIpBgpTmpPeerAfLastErrorReceivedText
This object contains an implementation specific
explanation of the error that was reported.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.4
rcIpBgpTmpPeerAfLastErrorReceivedData
The last error code's data seen by this peer.

Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated.
OctetString
Constraints:
range: 0-4075
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.5
rcIpBgpTmpPeerAfLastErrorCodeSent
The last error code sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.6
rcIpBgpTmpPeerAfLastErrorSubCodeSent
The last subcode sent to this peer via NOTIFICATION
message on this connection. If no error has occurred, this
field is zero.
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.7
rcIpBgpTmpPeerAfLastErrorSentTime
The timestamp that the last NOTIFICATION was sent to
this peer.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.8
rcIpBgpTmpPeerAfLastErrorSentText
This object contains an implementation specific
explanation of the error that is being reported.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.9
rcIpBgpTmpPeerAfLastErrorSentData
The last error code's data sent to this peer.

Per RFC 2578, some implementations may have limitations
dealing with OCTET STRINGS larger than 255. Thus, this
data may be truncated.
OctetString
Constraints:
range: 0-4075
 .1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.10

rcIpBgpTmpPeerAfEventTimesTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.3.1 · 1 row entry · 2 columns
Open in standard view 
A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the established state.
rcIpBgpTmpPeerAfEventTimesEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1
Each row contains a set of statistics about time
spent and events encountered in the peer session
established state.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpTmpPeerAfFsmEstablishedTime
This timer indicates how long (in seconds) this peer
has been in the established state or how long since this
peer was last in the established state. It is set to
zero when a new peer is configured or when the router i…
secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.1
rcIpBgpTmpPeerAfInUpdatesElapsedTime
Elapsed time (in seconds) since the last BGP UPDATE
message was received from the peer. Each time
bgpPeerInUpdates is incremented, the value of this
object is set to zero (0).
secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.2

rcIpBgpTmpPeerAfConfiguredTimersTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.3.2 · 1 row entry · 5 columns
Open in standard view 
Per peer management data on BGP session timers.
rcIpBgpTmpPeerAfConfiguredTimersEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1
Each entry corresponds to the current state of
BGP timers on a given peering session.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpTmpPeerAfConnectRetryInterval
Time interval (in seconds) for the ConnectRetry timer.
The suggested value for this timer is 120 seconds.
secondsUnsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.1
rcIpBgpTmpPeerAfHoldTimeConfigured
Time interval (in seconds) for the Hold Timer
established with the peer. The value of this object is
calculated by this BGP speaker, using the smaller of the
values in bgpPeerHoldTimeConfigured and the Hold Time
receiv…
secondsUnsigned32
Constraints:
range: 0-0
range: 3-65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.2
rcIpBgpTmpPeerAfKeepAliveConfigured
Time interval (in seconds) for the KeepAlive timer
configured for this BGP speaker with this peer. The
value of this object will only determine the KEEPALIVE
messages' frequency relative to the value specified in
bgpPe…
secondsUnsigned32
Constraints:
range: 0-21845
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.3
rcIpBgpTmpPeerAfMinASOrigInterval
Time interval (in seconds) for the
MinASOriginationInterval timer.

The suggested value for this timer is 15 seconds.
secondsUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.4
rcIpBgpTmpPeerAfMinRouteAdverInterval
Time interval (in seconds) for the
MinRouteAdvertisementInterval timer.

The suggested value for this timer is 30 seconds for
EBGP connections and 5 seconds for IBGP connections.
secondsUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.5

rcIpBgpTmpPeerAfNegotiatedTimersTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.3.3 · 1 row entry · 2 columns
Open in standard view 
Configured values of per-peer timers are seen
in the rcIpBgpTmpPeerAfConfiguredTimersTable.
Values in this table reflect the current
operational values, after negotiation from values
derived from initial configuration.
rcIpBgpTmpPeerAfNegotiatedTimersEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1
Each entry reflects a value of the currently
operational, negotiated timer as reflected in the
rcIpBgpTmpPeerAfNegotiatedTimersEntry.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpTmpPeerAfHoldTime
The value of this object is calculated by this BGP
Speaker as being;

zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages …
secondsUnsigned32
Constraints:
range: 0-0
range: 3-65535
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.1
rcIpBgpTmpPeerAfKeepAlive
Time interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with rcIpBgpTmpPeerAfHoldTime, it has the same
proportion a…
secondsUnsigned32
Constraints:
range: 0-21845
 .1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.2

rcIpBgpTmpPeerAfCountersTable

table
.1.3.6.1.4.1.2272.1.8.101.17.10.4.1 · 1 row entry · 5 columns
Open in standard view 
The counters associated with a BGP Peer.
rcIpBgpTmpPeerAfCountersEntry entry .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1
Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session.
Indexes
No indexes recorded
Column Syntax OID
rcIpBgpTmpPeerAfInUpdates
The number of BGP UPDATE messages received on this
connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.1
rcIpBgpTmpPeerAfOutUpdates
The number of BGP UPDATE messages transmitted on this
connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.2
rcIpBgpTmpPeerAfInTotalMessages
The total number of messages received from the remote
peer on this connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.3
rcIpBgpTmpPeerAfOutTotalMessages
The total number of messages transmitted to the remote
peer on this connection.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.4
rcIpBgpTmpPeerAfFsmEstablishedTransitions
The total number of times the BGP FSM transitioned into
the established state for this peer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.5

rcIpBgpTmpNlriTable

table
.1.3.6.1.4.1.2272.1.8.101.17.11.1 · 1 row entry · 10 columns
Open in standard view 
The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
rcIpBgpTmpNlriBest is true represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In.
rcIpBgpTmpNlriEntry entry .1.3.6.1.4.1.2272.1.8.101.17.11.1.1
Information about a path to a network.
Indexes
rcIpBgpTmpNlriAfi rcIpBgpTmpNlriSafi rcIpBgpTmpNlriPrefix rcIpBgpTmpNlriPrefixLen rcIpBgpTmpNlriIndex rcIpBgpTmpPeerAfInstance rcIpBgpTmpPeerAfLocalAddrType rcIpBgpTmpPeerAfLocalAddr rcIpBgpTmpPeerAfRemoteAddrType rcIpBgpTmpPeerAfRemoteAddr
Column Syntax OID
rcIpBgpTmpNlriIndex
This index allows for multiple instances of a base
prefix for a certain AFI-SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.1
rcIpBgpTmpNlriAfi
The address family of the prefix for this NLRI.

Note that the AFI is not necessarily equivalent to
the an InetAddressType.
RcIpBgpTmpAddressFamilyIdentifierTC
Textual Convention: RcIpBgpTmpAddressFamilyIdentifierTC Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.2
rcIpBgpTmpNlriSafi
The subsequent address family of the prefix for
this NLRI
RcIpBgpTmpSubsequentAddressFamilyIdentifierTC
Textual Convention: RcIpBgpTmpSubsequentAddressFamilyIdentifierTC Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.3
rcIpBgpTmpNlriPrefixType
The type of the IP address prefix in the
Network Layer Reachability Information field.
The value of this object is derived from the
appropriate value from the rcIpBgpTmpNlriAfi field.
Where an appropriate InetAddressTyp…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.4
rcIpBgpTmpNlriPrefix
An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
rcIpBgpTmpAfPathAttrAddrPrefixLen.
Any bits beyond the length specifi…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.5
rcIpBgpTmpNlriPrefixLen
Length in bits of the address prefix in
the Network Layer Reachability Information field.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.6
rcIpBgpTmpNlriBest
An indication of whether or not this route
was chosen as the best BGP4 route for this
destination.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.7
rcIpBgpTmpNlriCalcLocalPref
The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route.

In the case where this prefix is ineligible, this
object will be absent.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.8
rcIpBgpTmpAfPathAttrIndex
This value is a unique index for entries in the
rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the
point of creation of the rcIpBgpTmpAfPathAttrTable row entry.
While its value is guaranteed to be unique at a…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.9
rcIpBgpTmpAfPathAttrUnknownIndex
This value is a unique index for entries in the
rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at
the point of creation of the rcIpBgpTmpAfPathAttrUnknownTable row
entry. While its value is guaranteed to…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.1.1.10

rcIpBgpTmpAfPathAttrTable

table
.1.3.6.1.4.1.2272.1.8.101.17.11.4 · 1 row entry · 14 columns
Open in standard view 
Provides per advertised network-prefix attribute data,
as advertised over a peering session.
rcIpBgpTmpAfPathAttrEntry entry .1.3.6.1.4.1.2272.1.8.101.17.11.4.1
Each entry contains data about path attributes
associated with a given prefix in the rcIpBgpTmpNlriTable.
Indexes
rcIpBgpTmpAfPathAttrIndex
Column Syntax OID
rcIpBgpTmpAfPathAttrOrigin
The ultimate origin of the path information.
Enumeration
Enumerated Values:
1igp
2egp
3incomplete
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.1
rcIpBgpTmpAfPathAttrNextHopAddrType
The address family of the address for
the border router that should be used
to access the destination network.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.2
rcIpBgpTmpAfPathAttrNextHopAddr
The address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet associated with
this prefix.

Note that for RFC2545…
OctetString
Constraints:
range: 4-20
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.3
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType
The address type for IPv6 link local addresses.
This is present only when receiving RFC 2545
style double nexthops.

This object is optionally present in BGP
implementations that do not support IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.4
rcIpBgpTmpAfPathAttrLinkLocalNextHopAddr
This value contains an IPv6 link local address
and is present only when receiving RFC 2545 style
double nexthops.

This object is optionally present in BGP
implementations that do not support IPv6.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.5
rcIpBgpTmpAfPathAttrMedPresent
This value is true when the MED value was sent in
the UPDATE message.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.6
rcIpBgpTmpAfPathAttrMed
This metric is used to discriminate between multiple
exit points to an adjacent autonomous system. When the MED
value is absent but has a calculated default value, this
object will contain the calculated value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.7
rcIpBgpTmpAfPathAttrLocalPref
The originating BGP4 speakers degree of preference for an
advertised route. If the route was not sent with a LOCAL_PREF
value, this object will be absent.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.8
rcIpBgpTmpAfPathAttrAtomicAggregate
When this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present and
indicates that the NLRI MUST NOT be made more
specific.
Enumeration
Enumerated Values:
1atomicAggregatePresent
2atomicAggregateMissing
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.9
rcIpBgpTmpAfPathAttrAggregatorAS
The AS number of the last BGP4 speaker that performed route
aggregation. If the AGGREGATOR path attribute is absent, this
object will not be present in the conceptual row.
INET-ADDRESS-MIBInetAutonomousSystemNumber
Textual Convention: INET-ADDRESS-MIBInetAutonomousSystemNumber Unsigned32
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.10
rcIpBgpTmpAfPathAttrAggregatorAddr
The IP address of the last BGP4 speaker that performed route
aggregation. If the AGGREGATOR path attribute is absent, this
object will not be present in the conceptual row.
RcIpBgpTmpIdentifierTC
Textual Convention: RcIpBgpTmpIdentifierTC OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.11
rcIpBgpTmpAsPathCalcLength
This value represents the calculated length of the
AS Path according to the rules of the BGP
specification. This value is used in route selection.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.12
rcIpBgpTmpAsPathIndex
This value is a unique index for the decomposed AS Path
in the rcIpBgpTmpAsPathTable. It is assigned by the
agent at the point of creation of the rcIpBgpTmpAsPathTable
row entry. While its value is guaranteed to be uniq…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.13
rcIpBgpTmpAsPathString
This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator reada…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.101.17.11.4.1.14

rcIpInterVrfStaticRouteTable

table
.1.3.6.1.4.1.2272.1.8.103.2 · 1 row entry · 12 columns
Open in standard view 
This table is used to add static IP routes to
the device.  Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic.
rcIpInterVrfStaticRouteEntry entry .1.3.6.1.4.1.2272.1.8.103.2.1
A static route to a particular destination.
Indexes
rcIpInterVrfStaticRouteOwnerVrfId rcIpInterVrfStaticRouteDest rcIpInterVrfStaticRouteMask rcIpInterVrfStaticRouteNextHop
Column Syntax OID
rcIpInterVrfStaticRouteOwnerVrfId
Owner VRF id of the static route
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.103.2.1.1
rcIpInterVrfStaticRouteDest
The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route. Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is depende…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.103.2.1.2
rcIpInterVrfStaticRouteMask
Indicate the mask to be logical-ANDed with the
destination address before being compared to the
value in the rcIpRouteDest field. For those systems
that do not support arbitrary subnet masks, an
agent constructs the va…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.103.2.1.3
rcIpInterVrfStaticRouteNextHop
The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IP address on that
interface).
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.103.2.1.4
rcIpInterVrfStaticRouteMetric
The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
rcIpRouteProto value. If this metric is not used,
its value should be set to -1.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.8.103.2.1.5
rcIpInterVrfStaticRouteIfIndex
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.103.2.1.6
rcIpInterVrfStaticRoutePreference
Used to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The …
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.8.103.2.1.7
rcIpInterVrfStaticRouteEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.103.2.1.8
rcIpInterVrfStaticRouteStatus
Used to indicate the current status of
this entry.
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.2272.1.8.103.2.1.9
rcIpInterVrfStaticRouteRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.103.2.1.10
rcIpInterVrfStaticRouteLocalNextHop
Used to enable/disable this entry. True indicate that the
static route becomes active only if switch has a local route
to the network. False indicates that the static route becomes
active if switch has a local route or …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.103.2.1.11
rcIpInterVrfStaticRouteNextHopVrfId
Used to indicate nhVrfId in inter-VRF static-route configuration
VrfIdentifierr/w
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.8.103.2.1.12

rcArpExtTable

table
.1.3.6.1.4.1.2272.1.9.2 · 1 row entry · 4 columns
Open in standard view 
ARP extension table.  This table augments the
standard ipNetToMediaTable defined in RFC1213.
rcArpExtEntry entry .1.3.6.1.4.1.2272.1.9.2.1
Entry containing Proprietary ARP information.
An entry is automatically created in this table
when an ip address is configured on an interface.
Indexes
rcArpExtEntIfIndex
Column Syntax OID
rcArpExtEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.9.2.1.1
rcArpExtEntDoProxy
Enable or disable ARP proxy responses on the
specified interface.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.9.2.1.2
rcArpExtEntDoResp
Enable or disable the sending of ARP responses
on the specified interface.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.9.2.1.3
rcArpExtEntDoFlood
Enable or disable flooding of ARP responses for
NLBS Virtual Mac on the specified interface.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.9.2.1.4

rcRipExtTable

table
.1.3.6.1.4.1.2272.1.10.3 · 1 row entry · 4 columns
Open in standard view 
RIP extension table.  This table augments the
standard IfConfTable table in RFC1389.
rcRipExtEntry entry .1.3.6.1.4.1.2272.1.10.3.1
Entry containing Proprietary RIP information.
An entry is automatically created in this table
when an ip address is configured on an interface.
Indexes
rcRipExtEntIfIndex
Column Syntax OID
rcRipExtEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.10.3.1.1
rcRipExtEntTalk
Enable or disable RIP transmission on the
specified interface.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.10.3.1.2
rcRipExtEntListen
Enable or disable RIP reception on the specified
interface.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.10.3.1.3
rcRipExtEntPoison
Enable or disable operation of poison reverse
on the specified interface. If poison is
disabled, split-horizon operation is enabled.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.10.3.1.4

rcTestExtTable

table
.1.3.6.1.4.1.2272.1.11.1 · 1 row entry · 3 columns
Open in standard view 
Test extension table.  This table augments the
standard ifTestTable table in RFC1573.
rcTestEntry entry .1.3.6.1.4.1.2272.1.11.1.1
Proprietary test variables.
Indexes
rcTestExtIfIndex
Column Syntax OID
rcTestExtIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable.
The interface identified by a particular value
of this index is the same interface as
identified by the same value of ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.11.1.1.1
rcTestExtPassCount
The number of iterations of the test case that
completed successfully.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.11.1.1.2
rcTestExtFailCount
The number of iterations of the test case that
failed.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.11.1.1.3

rcStatTable

table
.1.3.6.1.4.1.2272.1.12.1 · 1 row entry · 26 columns
Open in standard view 
A table used to store port statistics.
rcStatEntry entry .1.3.6.1.4.1.2272.1.12.1.1
interface counters
Indexes
rcStatPortIndex
Column Syntax OID
rcStatPortIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.12.1.1.1
rcStatFrameTooShorts
The total number of frames that are too short
that were encountered on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.2
rcStatBridgeInUnicastFrames
The total number of incoming unicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.3
rcStatBridgeInMulticastFrames
The total number of incoming multicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.4
rcStatBridgeInBroadcastFrames
The total number of incoming broadcast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.5
rcStatBridgeInDiscards
The total number of frames that were discarded by
the bridging entity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.6
rcStatBridgeOutUnicastFrames
The total number of outgoing unicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.7
rcStatBridgeOutMulticastFrames
The total number of outgoing multicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.8
rcStatBridgeOutBroadcastFrames
The total number of outgoing broadcast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.9
rcStatRouteInUnicastFrames
The total number of incoming unicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.10
rcStatRouteInMulticastFrames
The total number of incoming multicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.11
rcStatRouteInDiscards
The total number of frames that were discarded by
the routing entity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.12
rcStatRouteOutUnicastFrames
The total number of outgoing unicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.13
rcStatRouteOutMulticastFrames
The total number of outgoing multicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.14
rcStatStgForwardTransitions
The number of times this port has transitioned
from the Learning state to the Forwarding state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.15
rcStatStgInConfigBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.16
rcStatStgInTcnBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.17
rcStatStgInBadBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.18
rcStatStgOutConfigBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.19
rcStatStgOutTcnBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.20
rcStatBridgeOutFrames
Used by the Accelar 8000 product family to account
for all transmitted bridge unicast, broadcast, and
multicast packets. The individual counters are not
supported.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.1.1.21
rcStatPolicerTotalBytes
The total number of bytes received on the
interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.1.1.25
rcStatPolicerTotalPkts
The total number of packets received on the
interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.1.1.26
rcStatPolicerGreenBytes
The total number of bytes received on the
interface that were below the committed rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.1.1.27
rcStatPolicerYellowBytes
The total number of bytes received on the
interface that were above the committed rate
but below the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.1.1.28
rcStatPolicerRedBytes
The total number of bytes received on the
interface that were above the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.1.1.29

rcStatGigTable

table
.1.3.6.1.4.1.2272.1.12.2 · 1 row entry · 11 columns
Open in standard view 
A table used to store Gigport error statistics.
rcStatGigEntry entry .1.3.6.1.4.1.2272.1.12.2.1
Gigabit interface error counters
Indexes
rcStatGigPortIndex
Column Syntax OID
rcStatGigPortIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.12.2.1.1
rcStatGigLinkFailures
The total number of link failures encountered on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.2
rcStatGigPacketErrors
The total number of packet errors encountered on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.3
rcStatGigCarrierErrors
The total number of carrier errors encountered on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.4
rcStatGigLinkInactiveErrors
The total number of link inactive errors encountered
on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.5
rcStatGigInFlowCtrlPkts deprecated
The total number of flow control packets received
by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.6
rcStatGigOutFlowCtrlPkts deprecated
The total number of flow control packets transmitted
by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.2.1.7
rcStatGigHCInPfcPkts
The total number of Priority Flow Control (PFC)
packets received by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.2.1.8
rcStatGigHCOutPfcPkts
The total number of Priority Flow Control (PFC)
packets transmitted by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.2.1.9
rcStatGigHCInFlowCtrlPkts
The total number of flow control packets received
by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.2.1.10
rcStatGigHCOutFlowCtrlPkts
The total number of flow control packets transmitted
by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.2.1.11

rcStatOspfIfTable

table
.1.3.6.1.4.1.2272.1.12.5 · 1 row entry · 19 columns
Open in standard view 
A table used to store OSPF interface
statistics.
rcStatOspfIfEntry entry .1.3.6.1.4.1.2272.1.12.5.1
Ospf interface statistics
Indexes
rcStatOspfIfIndex
Column Syntax OID
rcStatOspfIfIndex
An unique value that is used to identify a
physical interface.
Integer32
Constraints:
range: 0-6142
 .1.3.6.1.4.1.2272.1.12.5.1.1
rcStatOspfIfRxHellos
Used to indicate the number hello packets
received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.2
rcStatOspfIfRxDBDescrs
Used to indicate the number database descriptor
packets received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.3
rcStatOspfIfRxLSUpdates
Used to indicate the number Link state update
packets received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.4
rcStatOspfIfRxLSReqs
Used to indicate the number Link state request
packets received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.5
rcStatOspfIfRxLSAcks
Used to indicate the number Link state acknowlege
packets received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.6
rcStatOspfIfTxHellos
Used to indicate the number hello packets
transmitted by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.7
rcStatOspfIfTxDBDescrs
Used to indicate the number database descriptor
packets transmitted by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.8
rcStatOspfIfTxLSUpdates
Used to indicate the number Link state update
packets transmitted by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.9
rcStatOspfIfTxLSReqs
Used to indicate the number Link state request
packets transmitted by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.10
rcStatOspfIfTxLSAcks
Used to indicate the number Link state acknowlege
packets transmitted by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.11
rcStatOspfIfVersionMismatches
Used to indicate the number version
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.12
rcStatOspfIfAreaMismatches
Used to indicate the number area
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.13
rcStatOspfIfAuthTypeMismatches
Used to indicate the number AuthType
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.14
rcStatOspfIfAuthFailures
Used to indicate the number Authentication
failures.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.15
rcStatOspfIfNetMaskMismatches
Used to indicate the number net mask
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.16
rcStatOspfIfHelloIntervalMismatches
Used to indicate the number hello interval
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.17
rcStatOspfIfDeadIntervalMismatches
Used to indicate the number dead interval
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.18
rcStatOspfIfOptionMismatches
Used to indicate the number options
mismatches received by this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.5.1.19

rcStatMltIfExtnTable

table
.1.3.6.1.4.1.2272.1.12.6.1 · 1 row entry · 15 columns
Open in standard view 
A table used to store Mlt interface
statistics.
rcStatMltIfExtnEntry entry .1.3.6.1.4.1.2272.1.12.6.1.1
Mlt interface statistics
Indexes
rcStatMltIfExtnMltId
Column Syntax OID
rcStatMltIfExtnMltId
Mlt Id
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2272.1.12.6.1.1.1
rcStatMltIfExtnIfInMulticastPkts
multi-pkts to upper
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.1.1.2
rcStatMltIfExtnIfInBroadcastPkts
broad-pkts to upper
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.1.1.3
rcStatMltIfExtnIfOutMulticastPkts
multi-pkts from upper
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.1.1.4
rcStatMltIfExtnIfOutBroadcastPkts
broad-pkts from upper
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.1.1.5
rcStatMltIfExtnIfHCInOctets
The total number of octets received
on the MLT interface, including framing
characters.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.6
rcStatMltIfExtnIfHCInUcastPkts
The number of packets delivered by this
MLT to a higher MLT that were not addressed
to a nulticast or broadcase address at this
sublayer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.7
rcStatMltIfExtnIfHCInMulticastPkt
The number of packets delivered to this MLT that
were addressed to a nulticast address at this
sublayer. For a MAC layer protocol, this number
includes both Group and Functional addresses.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.8
rcStatMltIfExtnIfHCInBroadcastPkt
The number of packets delivered to this MLT that
were addressed to a broadcast address at this
sublayer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.9
rcStatMltIfExtnIfHCOutOctets
The total number of octets transmitted
out of the MLT interface, including
framing characters.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.10
rcStatMltIfExtnIfHCOutUcastPkts
The number of packets that hight-level protocols
requested be transmitted that were not addressed
to a multicast address at this MLT. This total
number includes those packets discarded or unsent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.11
rcStatMltIfExtnIfHCOutMulticast
The total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a multicast address at this
MLT, including those that were discarded or
not sent. For a MAC layer protocol, …
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.12
rcStatMltIfExtnIfHCOutBroadcast
The total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a broadcase address at this
MLT, including those that were discarded or
not sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.13
rcStatMltIfExtnIfHCInLsmPkts
The total number of Link State Messaging (LSM)
packets delivered to this MLT.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.14
rcStatMltIfExtnIfHCOutLsmPkts
The total number of Link State Messaging (LSM)
packets trasmitted on this MLT.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.12.6.1.1.15

rcStatMltEtherTable

table
.1.3.6.1.4.1.2272.1.12.6.2 · 1 row entry · 13 columns
Open in standard view 
A table used to store Mlt Ethernet
statistics.
rcStatMltEtherEntry entry .1.3.6.1.4.1.2272.1.12.6.2.1
Mlt enternet statistics
Indexes
rcStatMltEtherMltId
Column Syntax OID
rcStatMltEtherMltId
A value that uniquely identifies the Multi-Link
Trunk associated with this entry.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2272.1.12.6.2.1.1
rcStatMltEtherAlignmentErrors
A count of frames received on a particular MLT
that are not an integral number of octets in
length and do not pass the FCS check. The count
represented by an instance of this object is
incremented when the alignmentErr…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.2
rcStatMltEtherFCSErrors
A count of frames received on an MLT that are an
integral number of octets in length but do not pass
the FCS check. The count represented by an instance
of this object is incremented when the frameCheckError
status is …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.3
rcStatMltEtherSingleCollFrames
A count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by exactly one collision. A frame
that is counted by an instance of this objects
is also counted by the correspondi…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.4
rcStatMltEtherMultipleCollFrames
A count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by more than one collision. A frame
that is counted by an instance of this object
is also counted by the correspond…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.5
rcStatMltEtherSQETestError
A count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
MLT. SQE stands for Signal Quality Error.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.6
rcStatMltEtherDeferredTransmiss
A count of frames for which the first transmission
attempt on a particular MLT is delayed because the
medium is busy. The count represented by an
instance of this object does not include frames
involved in collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.7
rcStatMltEtherLateCollisions
The number of times that a collision is detected
on a particular MLT later than 512 bit-times
(64 octets) into the transmission of a packet.
Five hundred and twelve bit-times corresponds to
51.2 microseconds on a 10…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.8
rcStatMltEtherExcessiveCollis
A count of frames for which transmission on a
particular MLT fails due to excessive collisions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.9
rcStatMltEtherIMacTransmitError
A count of frames for which transmission on a
particular MLT fails due to an internal MAC
sublayer transmit error. A frame is only counted
by an instance of this object if it is not counted
by the corresponding inst…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.10
rcStatMltEtherCarrierSenseError
The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
MLT. The count represented by an instance of
this object is incremented at most onc…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.11
rcStatMltEtherFrameTooLong
A count of frames received on a particular MLT
that exceed the maximum permitted size (1518
octets). The count represented by an instance
os this object is incremented when the frame
TooLong status is returned by th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.12
rcStatMltEtherIMacReceiveError
A count of frames for which reception on a
particular MLT fails due to an internal MAC
sublayer receive error. A frame is only
counted by an instance of this object if it
is not counted by the corresponding instance …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.6.2.1.13

rcStatBgpPeerTable

table
.1.3.6.1.4.1.2272.1.12.11 · 1 row entry · 86 columns
Open in standard view 
A table used to store Bgp Peer statistics.
rcStatBgpPeerEntry entry .1.3.6.1.4.1.2272.1.12.11.1
Bgp Peer statistics
Indexes
rcStatBgpPeerAddr
Column Syntax OID
rcStatBgpPeerAddr SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.12.11.1.1
rcStatBgpPeerStarts
Number of times peer BGP connection started
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.2
rcStatBgpPeerStops
Number of times peer BGP connection stopped
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.3
rcStatBgpPeerOpens
Number of times peer opens TCP
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.4
rcStatBgpPeerCloses
Number of times peer closes TCP
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.5
rcStatBgpPeerFails
Number of times peer TCP attempts failed
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.6
rcStatBgpPeerFatals
Number of times peer TCP crashes due to fatal error
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.7
rcStatBgpPeerConnExps
Number of times peer TCP retry timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.8
rcStatBgpPeerHoldExps
Number of times peer hold timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.9
rcStatBgpPeerKeepExps
Number of times peer keepalive timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.10
rcStatBgpPeerTxMsgs
Total messages send by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.11
rcStatBgpPeerTxOpens
Opens sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.12
rcStatBgpPeerTxKeeps
Keepalives sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.13
rcStatBgpPeerTxUpdates
Updates sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.14
rcStatBgpPeerTxNotifys
Notifications sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.15
rcStatBgpPeerRxMsgs
Total messages received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.16
rcStatBgpPeerRxInCompPkts
Incomplete message received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.17
rcStatBgpPeerRxOpens
Opens received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.18
rcStatBgpPeerRxKeeps
Keepalives received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.19
rcStatBgpPeerRxUpdates
Updates received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.20
rcStatBgpPeerRxNotifys
Notifications received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.21
rcStatBgpPeerBadEvents
Number of invalid events received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.22
rcStatBgpPeerSyncFails
Number of times FDB sync failed of the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.23
rcStatBgpPeerRcvdTooShort
Number of messages recieved by the peer that is too sho
rt
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.24
rcStatBgpPeerNoMarker
Number of messages without marker recieved by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.25
rcStatBgpPeerDropped
Number of messages the peer has dropped
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.26
rcStatBgpPeerBadMsgTypes
Number of messages with invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.27
rcStatBgpPeerTrEvent
Peer trace event
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.28
rcStatBgpPeerTxRoutes
Number of NLRI sent by peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.29
rcStatBgpPeerRxRoutesAdded
Number of routes added into loc_rib by this peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.30
rcStatBgpPeerRxRoutesReplaced
Number of routes replaced by the routes received by the
peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.31
rcStatBgpPeerRxNlri
Number of NLRI received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.32
rcStatBgpPeerRxValidUpdates
Number of valid UPDATEs received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.33
rcStatBgpPeerRxECodeHeader
Total errors peer received: Header
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.34
rcStatBgpPeerRxECodeOpen
Total errors peer received: Open
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.35
rcStatBgpPeerRxECodeUpdate
Total errors peer received: Update
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.36
rcStatBgpPeerRxECodeHoldtimer
Total errors peer received: Hold
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.37
rcStatBgpPeerRxECodeFSM
Total errors peer received: Fsm
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.38
rcStatBgpPeerRxECodeCease
Total errors peer received: Cease
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.39
rcStatBgpPeerRxHdrCodeNoSync
Header errors peer received: Not Synchronized
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.40
rcStatBgpPeerRxHdrCodeInvalidMsgLen
Header errors peer received: Invalid message length
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.41
rcStatBgpPeerRxHdrCodeInvalidMsgType
Header errors peer received: Invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.42
rcStatBgpPeerRxOpCodeBadVer
Open errors peer received: Bad Version
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.43
rcStatBgpPeerRxOpCodeBadAs
Open errors peer received: Bad AS number
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.44
rcStatBgpPeerRxOpCodeBadRtID
Open errors peer received: Bad BGP ID
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.45
rcStatBgpPeerRxOpCodeUnsuppOption
Open errors peer received: Unsupported Options
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.46
rcStatBgpPeerRxOpCodeAuthFail
Open errors peer received: Authorization failures
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.47
rcStatBgpPeerRxOpCodeBadHold
Open errors peer received: Bad Hold value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.48
rcStatBgpPeerRxUpdCodeMalformedAttrList
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.49
rcStatBgpPeerRxUpdCodeWelknownAttrUnrecog
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.50
rcStatBgpPeerRxUpdCodeWelknownAttrMiss
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.51
rcStatBgpPeerRxUpdCodeAttrFlagError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.52
rcStatBgpPeerRxUpdCodeAttrLenError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.53
rcStatBgpPeerRxUpdCodeBadORIGINAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.54
rcStatBgpPeerRxUpdCodeASRoutingLoop
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.55
rcStatBgpPeerRxUpdCodeBadNHAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.56
rcStatBgpPeerRxUpdCodeOptionalAttrError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.57
rcStatBgpPeerRxUpdCodeBadNetworkField
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.58
rcStatBgpPeerRxUpdCodeMalformedASPath
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.59
rcStatBgpPeerTxECodeHeader
Total errors peer received: Header
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.60
rcStatBgpPeerTxECodeOpen
Total errors peer received: Open
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.61
rcStatBgpPeerTxECodeUpdate
Total errors peer received: Update
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.62
rcStatBgpPeerTxECodeHoldtimer
Total errors peer received: Hold
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.63
rcStatBgpPeerTxECodeFSM
Total errors peer received: Fsm
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.64
rcStatBgpPeerTxECodeCease
Total errors peer received: Cease
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.65
rcStatBgpPeerTxHdrCodeNoSync
Header errors peer received: Not Synchronized
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.66
rcStatBgpPeerTxHdrCodeInvalidMsgLen
Header errors peer received: Invalid message length
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.67
rcStatBgpPeerTxHdrCodeInvalidMsgType
Header errors peer received: Invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.68
rcStatBgpPeerTxOpCodeBadVer
Open errors peer received: Bad Version
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.69
rcStatBgpPeerTxOpCodeBadAs
Open errors peer received: Bad AS number
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.70
rcStatBgpPeerTxOpCodeBadRtID
Open errors peer received: Bad BGP ID
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.71
rcStatBgpPeerTxOpCodeUnsuppOption
Open errors peer received: Unsupported Options
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.72
rcStatBgpPeerTxOpCodeAuthFail
Open errors peer received: Authorization failures
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.73
rcStatBgpPeerTxOpCodeBadHold
Open errors peer received: Bad Hold value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.74
rcStatBgpPeerTxUpdCodeMalformedAttrList
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.75
rcStatBgpPeerTxUpdCodeWelknownAttrUnrecog
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.76
rcStatBgpPeerTxUpdCodeWelknownAttrMiss
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.77
rcStatBgpPeerTxUpdCodeAttrFlagError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.78
rcStatBgpPeerTxUpdCodeAttrLenError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.79
rcStatBgpPeerTxUpdCodeBadORIGINAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.80
rcStatBgpPeerTxUpdCodeASRoutingLoop
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.81
rcStatBgpPeerTxUpdCodeBadNHAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.82
rcStatBgpPeerTxUpdCodeOptionalAttrError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.83
rcStatBgpPeerTxUpdCodeBadNetworkField
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.84
rcStatBgpPeerTxUpdCodeMalformedASPath
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.11.1.85
rcStatBgpPeerReset
reset peer stats
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.12.11.1.86

rcStatBgpPeerAfTable

table
.1.3.6.1.4.1.2272.1.12.13 · 1 row entry · 87 columns
Open in standard view 
A table used to store v4/v6 Bgp Peer statistics.
rcStatBgpPeerAfEntry entry .1.3.6.1.4.1.2272.1.12.13.1
AF independent Bgp Peer statistics
Indexes
rcStatBgpPeerAfAddrType rcStatBgpPeerAfAddr
Column Syntax OID
rcStatBgpPeerAfAddrType
Inet address type of the AF independent peer
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.12.13.1.1
rcStatBgpPeerAfAddr
Inet address of the AF independent peer
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.12.13.1.2
rcStatBgpPeerAfStarts
Number of times peer BGP connection started
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.3
rcStatBgpPeerAfStops
Number of times peer BGP connection stopped
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.4
rcStatBgpPeerAfOpens
Number of times peer opens TCP
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.5
rcStatBgpPeerAfCloses
Number of times peer closes TCP
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.6
rcStatBgpPeerAfFails
Number of times peer TCP attempts failed
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.7
rcStatBgpPeerAfFatals
Number of times peer TCP crashes due to fatal error
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.8
rcStatBgpPeerAfConnExps
Number of times peer TCP retry timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.9
rcStatBgpPeerAfHoldExps
Number of times peer hold timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.10
rcStatBgpPeerAfKeepExps
Number of times peer keepalive timer expired
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.11
rcStatBgpPeerAfTxMsgs
Total messages send by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.12
rcStatBgpPeerAfTxOpens
Opens sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.13
rcStatBgpPeerAfTxKeeps
Keepalives sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.14
rcStatBgpPeerAfTxUpdates
Updates sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.15
rcStatBgpPeerAfTxNotifys
Notifications sent by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.16
rcStatBgpPeerAfRxMsgs
Total messages received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.17
rcStatBgpPeerAfRxInCompPkts
Incomplete message received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.18
rcStatBgpPeerAfRxOpens
Opens received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.19
rcStatBgpPeerAfRxKeeps
Keepalives received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.20
rcStatBgpPeerAfRxUpdates
Updates received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.21
rcStatBgpPeerAfRxNotifys
Notifications received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.22
rcStatBgpPeerAfBadEvents
Number of invalid events received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.23
rcStatBgpPeerAfSyncFails
Number of times FDB sync failed of the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.24
rcStatBgpPeerAfRcvdTooShort
Number of messages recieved by the peer that is too sho
rt
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.25
rcStatBgpPeerAfNoMarker
Number of messages without marker recieved by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.26
rcStatBgpPeerAfDropped
Number of messages the peer has dropped
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.27
rcStatBgpPeerAfBadMsgTypes
Number of messages with invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.28
rcStatBgpPeerAfTrEvent
Peer trace event
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.29
rcStatBgpPeerAfTxRoutes
Number of NLRI sent by peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.30
rcStatBgpPeerAfRxRoutesAdded
Number of routes added into loc_rib by this peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.31
rcStatBgpPeerAfRxRoutesReplaced
Number of routes replaced by the routes received by the
peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.32
rcStatBgpPeerAfRxNlri
Number of NLRI received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.33
rcStatBgpPeerAfRxValidUpdates
Number of valid UPDATEs received by the peer
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.34
rcStatBgpPeerAfRxECodeHeader
Total errors peer received: Header
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.35
rcStatBgpPeerAfRxECodeOpen
Total errors peer received: Open
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.36
rcStatBgpPeerAfRxECodeUpdate
Total errors peer received: Update
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.37
rcStatBgpPeerAfRxECodeHoldtimer
Total errors peer received: Hold
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.38
rcStatBgpPeerAfRxECodeFSM
Total errors peer received: Fsm
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.39
rcStatBgpPeerAfRxECodeCease
Total errors peer received: Cease
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.40
rcStatBgpPeerAfRxHdrCodeNoSync
Header errors peer received: Not Synchronized
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.41
rcStatBgpPeerAfRxHdrCodeInvalidMsgLen
Header errors peer received: Invalid message length
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.42
rcStatBgpPeerAfRxHdrCodeInvalidMsgType
Header errors peer received: Invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.43
rcStatBgpPeerAfRxOpCodeBadVer
Open errors peer received: Bad Version
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.44
rcStatBgpPeerAfRxOpCodeBadAs
Open errors peer received: Bad AS number
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.45
rcStatBgpPeerAfRxOpCodeBadRtID
Open errors peer received: Bad BGP ID
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.46
rcStatBgpPeerAfRxOpCodeUnsuppOption
Open errors peer received: Unsupported Options
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.47
rcStatBgpPeerAfRxOpCodeAuthFail
Open errors peer received: Authorization failures
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.48
rcStatBgpPeerAfRxOpCodeBadHold
Open errors peer received: Bad Hold value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.49
rcStatBgpPeerAfRxUpdCodeMalformedAttrList
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.50
rcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.51
rcStatBgpPeerAfRxUpdCodeWelknownAttrMiss
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.52
rcStatBgpPeerAfRxUpdCodeAttrFlagError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.53
rcStatBgpPeerAfRxUpdCodeAttrLenError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.54
rcStatBgpPeerAfRxUpdCodeBadORIGINAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.55
rcStatBgpPeerAfRxUpdCodeASRoutingLoop
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.56
rcStatBgpPeerAfRxUpdCodeBadNHAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.57
rcStatBgpPeerAfRxUpdCodeOptionalAttrError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.58
rcStatBgpPeerAfRxUpdCodeBadNetworkField
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.59
rcStatBgpPeerAfRxUpdCodeMalformedASPath
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.60
rcStatBgpPeerAfTxECodeHeader
Total errors peer received: Header
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.61
rcStatBgpPeerAfTxECodeOpen
Total errors peer received: Open
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.62
rcStatBgpPeerAfTxECodeUpdate
Total errors peer received: Update
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.63
rcStatBgpPeerAfTxECodeHoldtimer
Total errors peer received: Hold
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.64
rcStatBgpPeerAfTxECodeFSM
Total errors peer received: Fsm
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.65
rcStatBgpPeerAfTxECodeCease
Total errors peer received: Cease
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.66
rcStatBgpPeerAfTxHdrCodeNoSync
Header errors peer received: Not Synchronized
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.67
rcStatBgpPeerAfTxHdrCodeInvalidMsgLen
Header errors peer received: Invalid message length
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.68
rcStatBgpPeerAfTxHdrCodeInvalidMsgType
Header errors peer received: Invalid message type
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.69
rcStatBgpPeerAfTxOpCodeBadVer
Open errors peer received: Bad Version
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.70
rcStatBgpPeerAfTxOpCodeBadAs
Open errors peer received: Bad AS number
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.71
rcStatBgpPeerAfTxOpCodeBadRtID
Open errors peer received: Bad BGP ID
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.72
rcStatBgpPeerAfTxOpCodeUnsuppOption
Open errors peer received: Unsupported Options
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.73
rcStatBgpPeerAfTxOpCodeAuthFail
Open errors peer received: Authorization failures
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.74
rcStatBgpPeerAfTxOpCodeBadHold
Open errors peer received: Bad Hold value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.75
rcStatBgpPeerAfTxUpdCodeMalformedAttrList
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.76
rcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.77
rcStatBgpPeerAfTxUpdCodeWelknownAttrMiss
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.78
rcStatBgpPeerAfTxUpdCodeAttrFlagError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.79
rcStatBgpPeerAfTxUpdCodeAttrLenError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.80
rcStatBgpPeerAfTxUpdCodeBadORIGINAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.81
rcStatBgpPeerAfTxUpdCodeASRoutingLoop
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.82
rcStatBgpPeerAfTxUpdCodeBadNHAttr
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.83
rcStatBgpPeerAfTxUpdCodeOptionalAttrError
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.84
rcStatBgpPeerAfTxUpdCodeBadNetworkField
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.85
rcStatBgpPeerAfTxUpdCodeMalformedASPath
Update errors peer received: Malformed Attr List
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.12.13.1.86
rcStatBgpPeerAfReset
reset peer stats
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.12.13.1.87

rcStgTable

table
.1.3.6.1.4.1.2272.1.13.4 · 1 row entry · 24 columns
Open in standard view 
A table used to store Spanning Tree Group (STG)
information.  Each row in the table specifies
a different STG in the device.
rcStgEntry entry .1.3.6.1.4.1.2272.1.13.4.1
STG attributes
Indexes
rcStgId
Column Syntax OID
rcStgId
An identifier used to identify a STG in the device.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.13.4.1.1
rcStgTaggedBpduAddress
The MAC address to be assigned to the destination
mac address field in tagged BPDUs.

The default address is the well known multicast
group address 01-80-c2-00-00-00.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.13.4.1.2
rcStgTaggedBpduVlanId
The VLAN ID to be used for tagging BPDUs.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.13.4.1.3
rcStgBridgeAddress
The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only req…
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.13.4.1.4
rcStgNumPorts
The number of ports controlled by this bridging entity.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.13.4.1.5
rcStgProtocolSpecification
An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…
Enumeration
Enumerated Values:
1unknown
2decLb100
3ieee8021d
 .1.3.6.1.4.1.2272.1.13.4.1.6
rcStgPriority
The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of rcStgBridgeAddress.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.13.4.1.7
rcStgTimeSinceTopologyChange
The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.4.1.8
rcStgTopChanges
The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.4.1.9
rcStgDesignatedRoot
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originat…
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.2272.1.13.4.1.10
rcStgRootCost
The cost of the path to the root as seen from
this bridge.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.13.4.1.11
rcStgRootPort
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.13.4.1.12
rcStgMaxAge
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.2272.1.13.4.1.13
rcStgHelloTime
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.2272.1.13.4.1.14
rcStgHoldTime
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.13.4.1.15
rcStgForwardDelay
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…
Timeout
Textual Convention: Timeout Integer32
 .1.3.6.1.4.1.2272.1.13.4.1.16
rcStgBridgeMaxAge
The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
rcStgBridgeHelloTime. The granularity of th…
Integer32r/w
Constraints:
range: 600-4000
 .1.3.6.1.4.1.2272.1.13.4.1.17
rcStgBridgeHelloTime
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempte…
Integer32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.2272.1.13.4.1.18
rcStgBridgeForwardDelay
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
rcStgBridgeMaxAge. The granularity o…
Integer32r/w
Constraints:
range: 400-3000
 .1.3.6.1.4.1.2272.1.13.4.1.19
rcStgEnableStp
Indicate whether the spanning tree protocol
should be active in this STG.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.13.4.1.20
rcStgStpTrapEnable
Indicate whether traps relating to the spanning
tree protocol should be sent for this STG.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.13.4.1.21
rcStgPortMembers
A bitfield used to identify which ports in
the system are members this STG.

The bitfield is 104 octets long representing
ports 64 (1/1) to 831 (12/68) (inclusive).
OctetStringr/w
Constraints:
range: 0-104
 .1.3.6.1.4.1.2272.1.13.4.1.22
rcStgRowStatus
Row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.13.4.1.23
rcStgPortStpState
Every 2 bitfields used to identify a port state
in this STG. Port state is cataloged as non-stp(0),
blocking(1), learning(2), and forwarding(3).
OctetString
Constraints:
range: 208-208
 .1.3.6.1.4.1.2272.1.13.4.1.24

rcStgPortTable

table
.1.3.6.1.4.1.2272.1.13.5 · 1 row entry · 20 columns
Open in standard view 
A table used to store Spanning Tree Group (STG)
port related information.  If a port is 
associated with more than one STGs, the port  
will have one entry in this table for each STG 
it assigned to.
rcStgPortEntry entry .1.3.6.1.4.1.2272.1.13.5.1
STG Port attributes
Indexes
rcStgPort rcStgPortStgId
Column Syntax OID
rcStgPort
The port number of the port for which this entry
contains Spanning Tree Protocol management
information.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.13.5.1.1
rcStgPortStgId
The STG identifier this port is assigned to.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.2272.1.13.5.1.2
rcStgPortPriority
The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
rcStgPort. The original range is 0..2…
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.2272.1.13.5.1.3
rcStgPortState
The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
 .1.3.6.1.4.1.2272.1.13.5.1.4
rcStgPortEnableStp
The enabled/disabled status of the port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.13.5.1.5
rcStgPortFastStart
When this flag is set, the port is moved
straight to the forwarding(5) state upon
being enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.13.5.1.6
rcStgPortPathCost
The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.13.5.1.7
rcStgPortDesignatedRoot
The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.2272.1.13.5.1.8
rcStgPortDesignatedCost
The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.13.5.1.9
rcStgPortDesignatedBridge
The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.2272.1.13.5.1.10
rcStgPortDesignatedPort
The Port Identifier of the port on the Designated
Bridge for this port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.2272.1.13.5.1.11
rcStgPortForwardTransitions
The number of times this port has transitioned
from the Learning state to the Forwarding state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.12
rcStgPortInConfigBpdus
The number of Config BPUDs received by
this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.13
rcStgPortInTcnBpdus
The number of Topology Change Notification
BPUDs received by this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.14
rcStgPortInBadBpdus
The number of Bad BPUDs received by this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.15
rcStgPortOutConfigBpdus
The number of Config BPUDs transmitted by this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.16
rcStgPortOutTcnBpdus
The number of Topology Change Notification
BPUDs transmitted by this port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.13.5.1.17
rcStgPortRowStatus
Row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.13.5.1.18
rcStgPortChangeDetection
If disabled, topology change notifications
are not sent for the port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.13.5.1.19
rcStgPortPathCost32
The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the
default value of this parameter be in inverse
proportion to the speed of t…
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.2272.1.13.5.1.20

rcBridgeStaticTable

table
.1.3.6.1.4.1.2272.1.14.3 · 1 row entry · 4 columns
Open in standard view 
This table is a proprietary replacement to the
standard dot1dStaticTable in rfc1493.
rcBridgeStaticEntry entry .1.3.6.1.4.1.2272.1.14.3.1
A table containing forwarding information about
unicast entries configured into the bridge by
management. This information is used by the
transparent bridging function in determining how
to propagate a received frame.
Indexes
rcBridgeStaticAddress rcBridgeStaticPort rcBridgeStaticVlanId
Column Syntax OID
rcBridgeStaticAddress
The MAC address of this entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.3.1.1
rcBridgeStaticPort
Port on which the MAC address is found.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.3.1.2
rcBridgeStaticStatus
This object indicates the status of this
entry. The default value is permanent(3).
Enumerationr/w
Enumerated Values:
1other
2invalid
3permanent
4deleteOnReset
5deleteOnTimeout
 .1.3.6.1.4.1.2272.1.14.3.1.5
rcBridgeStaticVlanId RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.14.3.1.7

rcBridgeUnknownMacDiscardTable

table
.1.3.6.1.4.1.2272.1.14.7 · 1 row entry · 9 columns
Open in standard view 
This table is used to configure the 'unknown mac discard' feature.
This feature applies to layer 2 and layer 3 packets coming from 
or going out to a specific physical port.
rcBridgeUnknownMacDiscardEntry entry .1.3.6.1.4.1.2272.1.14.7.1
A table containing information configuring
the 'unknown mac discard' feature.
Indexes
rcBridgeUnknownMacDiscardIfIndex
Column Syntax OID
rcBridgeUnknownMacDiscardIfIndex
Port on which this 'unknown mac discard' configuration applied to.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.7.1.1
rcBridgeUnknownMacDiscardAutoLearnEnable
This variable is used to enable/disable the auto-learn capability
of a specific port. The default value is auto-learn disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.7.1.2
rcBridgeUnknownMacDiscardAutoLearnMode
This variable is used to control the auto-learn mode to either
one-shot or continuous. In one-shot mode, the first n MAC addresses
will be learned. The number n is dependents on the system's
available resource. In co…
Enumerationr/w
Enumerated Values:
1oneShot
2continuous
 .1.3.6.1.4.1.2272.1.14.7.1.3
rcBridgeUnknownMacDiscardAutoLearnTableMode
This MIB variable is used to lock or unlock the auto-learn MAC
table. When the auto-learn table is lock neither new MAC will be
learned nor the original learned MAC will be aged out. User needs
to lock the auto-learn…
Enumerationr/w
Enumerated Values:
1unlock
2lock
 .1.3.6.1.4.1.2272.1.14.7.1.4
rcBridgeUnknownMacDiscardLogViolations
This variable controls the logging action that the system will
take when a MAC address violation event was detected. The
value 'enable' means a log record will be written to the system
log file when a violation event…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.14.7.1.5
rcBridgeUnknownMacDiscardSendTrap
This variable controls the send trap action that system will take
when a MAC address violation event was detected. The value 'enable'
means a SNMP trap packet will be send to the management station
when a violation e…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.14.7.1.6
rcBridgeUnknownMacDiscardDisablePort
This variable controls the 'disable-port' action that system
will take when a MAC address violation event was detected. The
value 'enable' means the specific port will be disabled when the
violation event was detecte…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.14.7.1.7
rcBridgeUnknownMacDiscardMacCountMax
This variable represents the maxium number of MACc that
can be added to some port.
Integer32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.2272.1.14.7.1.10
rcBridgeUnknownMacDiscardMacCountCur
This variable represents the current number of MACs that have
been added to some port.
Integer32
Constraints:
range: 0-2048
 .1.3.6.1.4.1.2272.1.14.7.1.11

rcBridgeManualEditTable

table
.1.3.6.1.4.1.2272.1.14.8 · 1 row entry · 5 columns
Open in standard view 
This table is used to specify what MAC addresses can be learned 
on each port.
rcBridgeManualEditEntry entry .1.3.6.1.4.1.2272.1.14.8.1
A table containing information of
MAC addresses that can be learned.
Indexes
rcBridgeManualEditAddress
Column Syntax OID
rcBridgeManualEditAddress
This variable contains the source MAC address of an entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.8.1.1
rcBridgeManualEditPorts
This variable contains the allowed ports on which the MAC
address of this entry can be learned.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.14.8.1.2
rcBridgeManualEditMonitor
This variable specifies the monitoring setting of the MAC
address. The value 'true' means a copy of packet frame that
send from or to the MAC address is forwarded to the designated
monitoring port on the system. The …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.8.1.3
rcBridgeManualEditPriority
This variable specifies the priority setting of the MAC address.
The value 'low' means packet frames send from the MAC address
is forwarded at low priority. The default value is low.
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.2272.1.14.8.1.4
rcBridgeManualEditStatus
The variable controls the status of a MAC address in the table.
The value 'active' is used to add the MAC address entry into the
table. The value 'invalid' is used to delete the MAC address from
the table.
Enumerationr/w
Enumerated Values:
1other
2invalid
3active
 .1.3.6.1.4.1.2272.1.14.8.1.5

rcBridgeAutoLearnTable

table
.1.3.6.1.4.1.2272.1.14.10 · 1 row entry · 5 columns
Open in standard view 
This table contains information of auto-learned MAC address when 
the 'unknow MAC discard' table's auto-learn is enabled. User must 
explicitly lock and save the table into NVRAM in order to have 
this table has the same configuration cross the system reset.
rcBridgeAutoLearnEntry entry .1.3.6.1.4.1.2272.1.14.10.1
Entries in this table are created automatically
when the user explicitly does a lock operation on
the auto-learn-table (i.e., when 'AutoLearnTableMode'
is set to lock(2)).
Indexes
rcBridgeAutoLearnAddress
Column Syntax OID
rcBridgeAutoLearnAddress
This variable contains the source MAC address of the entries.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.10.1.1
rcBridgeAutoLearnPort
This variable contains the port where the MAC address was learned.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.14.10.1.2
rcBridgeAutoLearnMonitor
This variable contains the monitor setting of the MAC address.
The value 'true' means a copy of packet frame that send from or
to the MAC address is forwarded to the designated monitoring port
on the system. This val…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.10.1.3
rcBridgeAutoLearnPriority
This variable contains the priority setting of the MAC address.
The value 'low' means packet frames send from the MAC address is
forwarded at low priority. The value 'high' means packet frames
send from the MAC addre…
Enumeration
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.2272.1.14.10.1.4
rcBridgeAutoLearnAction
This variable is for converting an auto-learned MAC address entry
to a manual edit MAC address entry. This variable provides a mechanism
for user to move a MAC address entry from auto-learn table to manual
edit table.
Enumerationr/w
Enumerated Values:
0none
1convertToManualEdit
 .1.3.6.1.4.1.2272.1.14.10.1.5

rcRateLimitTable

table
.1.3.6.1.4.1.2272.1.14.14 · 1 row entry · 4 columns
Open in standard view
rcRateLimitEntry entry .1.3.6.1.4.1.2272.1.14.14.1
Indexes
rcRateLimitIfIndex rcRateLimitIfTrafficType
Column Syntax OID
rcRateLimitIfIndex
Port ifindex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.14.1.1
rcRateLimitIfTrafficType
Type of traffic allowed.
Enumerationr/w
Enumerated Values:
1multicast
2broadcast
 .1.3.6.1.4.1.2272.1.14.14.1.2
rcRateLimitIfEnable
Turn on/off rate limiting on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.14.1.4
rcRateLimitIfAllowedRatePps
Allowed traffic rate packets per second.
0 means disabled
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.14.14.1.5

rcBridgeStaticMcastTable

table
.1.3.6.1.4.1.2272.1.14.15 · 1 row entry · 6 columns
Open in standard view
rcBridgeStaticMcastEntry entry .1.3.6.1.4.1.2272.1.14.15.1
Indexes
rcBridgeStaticMcastVlanId rcBridgeStaticMcastAddress
Column Syntax OID
rcBridgeStaticMcastVlanId
Vlan Id
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.2272.1.14.15.1.1
rcBridgeStaticMcastAddress
src mac addr.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.15.1.2
rcBridgeStaticMcastForwardingPorts
ports for forward this mac
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.14.15.1.3
rcBridgeStaticMcastMltIds
list of mlts this mac will be forwarded on
IdListr/w
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.14.15.1.4
rcBridgeStaticMcastNumMltIds
number of mlts Ids
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.14.15.1.5
rcBridgeStaticMcastRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.14.15.1.6

rcBridgeFdbProtectTable

table
.1.3.6.1.4.1.2272.1.14.17 · 1 row entry · 8 columns
Open in standard view 
This table gives information about the mac learning
limits on a particular port.
rcBridgeFdbProtectEntry entry .1.3.6.1.4.1.2272.1.14.17.1
Information about a specific MAC address learning
limits of a specific port.
Indexes
rcBridgeFdbProtectPortNum
Column Syntax OID
rcBridgeFdbProtectPortNum
This object is the interface on which MAC address
learning limit is applied.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.17.1.1
rcBridgeFdbProtectMaxMacCount
Used to indicate maximum number of MAC address
that can be learnt on the port.
Integer32r/w
Constraints:
range: 1-64000
 .1.3.6.1.4.1.2272.1.14.17.1.2
rcBridgeFdbProtectMinMacCount
Used to indicate minimum number of MAC address
learnt which mac address learning will be re-enabled
on the port.
Integer32r/w
Constraints:
range: 1-64000
 .1.3.6.1.4.1.2272.1.14.17.1.3
rcBridgeFdbProtectEnable
Used to enable or disable MAC learning limit
feature on the port.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.14.17.1.4
rcBridgeFdbProtectCurrentMacCount
This object indicates the current number of
MAC address learnt on the port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.14.17.1.5
rcBridgeFdbProtectMacLearning
This object indicates whether the port can
currrently learn new MAC addresses or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.17.1.6
rcBridgeFdbProtectViolationLogTrap
Used to enable or disable logging and sending
of snmp trap, once MAC learning limit is reached
for the port.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.14.17.1.7
rcBridgeFdbProtectViolationDownPort
Used to enable or disable the action of disabling
the port, once MAC learning limit is reached
for the port.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.14.17.1.8

rcBridgeTpFdbTable

table
.1.3.6.1.4.1.2272.1.14.20 · 1 row entry · 6 columns
Open in standard view 
This table is an replacement to the standard
dot1dTpFdbTable in rfc1493.
rcBridgeTpFdbEntry entry .1.3.6.1.4.1.2272.1.14.20.1
Information about a specific unicast MAC address
for which the bridge has some forwarding information.
Indexes
rcBridgeTpFdbVlanId rcBridgeTpFdbAddress
Column Syntax OID
rcBridgeTpFdbVlanId
Used to indicate the Vlan ID for this
MAC address.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.14.20.1.1
rcBridgeTpFdbAddress
A unicast MAC address for which the bridge
has forwarding and/or filtering information.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.20.1.2
rcBridgeTpFdbStatus
This object indicates the status of this entry.
Enumerationr/w
Enumerated Values:
1other
2invalid
3learned
4self
5mgmt
 .1.3.6.1.4.1.2272.1.14.20.1.3
rcBridgeTpFdbPort
Either the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of rcBridgeTpFdbAddress has been seen. A value of
'0' indicates that the po…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.20.1.4
rcBridgeTpFdbSmltRemote
A MAC address indicate for remote learnt,
either local or remote.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.20.1.5
rcBridgeTpFdbBMac
If the rcBridgeTpFdbEntry is learned from a SPBM network,
instead of using port to track where the rcBridgeTpFdbAddress
come from, the backbone MAC address is used to track that.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.20.1.6

rcBridgeRemoteMacTable

table
.1.3.6.1.4.1.2272.1.14.21 · 1 row entry · 11 columns
Open in standard view 
This table is for PLSB cvlan UNI remote mac entries
rcBridgeRemoteMacEntry entry .1.3.6.1.4.1.2272.1.14.21.1
Information about a specific cvlan UNI remote MAC
address for which the bridge has the forwarding
information.
Indexes
rcBridgeRemoteMacVlanId rcBridgeRemoteMacAddr
Column Syntax OID
rcBridgeRemoteMacVlanId
Used to indicate the Vlan ID for this
MAC address.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.14.21.1.1
rcBridgeRemoteMacAddr
A customer MAC address for which the bridge
has forwarding and/or filtering information.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.21.1.2
rcBridgeRemoteMacStatus
This object indicates the status of this entry.
Enumeration
Enumerated Values:
1other
2invalid
3learned
4self
5mgmt
 .1.3.6.1.4.1.2272.1.14.21.1.3
rcBridgeRemoteMacDestAddr
A provider MAC address for which the bridge
has forwarding and/or filtering information.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.14.21.1.4
rcBridgeRemoteMacPrimaryBVlanId
Used to indicate the BVlan ID for this
MAC address.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.14.21.1.5
rcBridgeRemoteMacPrimaryDestSysName
Primary System name of the node where MAC address entry
come from.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.14.21.1.6
rcBridgeRemoteMacPrimaryPort
Either the value '0', or the primary
port on which a frame came from.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.21.1.7
rcBridgeRemoteMacSecondaryBVlanId
Used to indicate the BVlan ID for this
MAC address.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2272.1.14.21.1.8
rcBridgeRemoteMacSecondaryDestSysName
Secondary System name of the node where MAC address entry
come from.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.14.21.1.9
rcBridgeRemoteMacSecondaryPort
Either the value '0', or the secondary
port on which a frame came from.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.14.21.1.10
rcBridgeRemoteMacSmltRemote
A MAC address indicate for remote learnt from ist peer
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.14.21.1.11

rcMltTable

table
.1.3.6.1.4.1.2272.1.17.10 · 1 row entry · 23 columns
Open in standard view 
A list of Multi-Link Trunk entries. The number of 
entries is given by rcMltNumMlts.
rcMltEntry entry .1.3.6.1.4.1.2272.1.17.10.1
Entry containing configuration information for a
particular Multi-Link Trunk.
Indexes
rcMltId
Column Syntax OID
rcMltId
A value that uniquely identifies the Multi-Link
Trunk associated with this entry.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.2272.1.17.10.1.1
rcMltName
An administratively-assigned name for this MLT.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.17.10.1.2
rcMltPortMembers
The set of ports that are members of this MLT.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.17.10.1.3
rcMltPortType
The type of MLT port: access(1) or trunk(2).
Enumerationr/w
Enumerated Values:
1access
2trunk
 .1.3.6.1.4.1.2272.1.17.10.1.4
rcMltNumVlanIds
Used to indicate the number of VLAN IDs that
are stored in the rcMltVlanIds variable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.17.10.1.5
rcMltRowStatus
Used to create/delete entries in the rcMltTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.17.10.1.7
rcMltEnable
Enable the entry.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.17.10.1.8
rcMltLoadBalance
Perform load balance?
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.17.10.1.9
rcMltIfIndex
Used to indicate the 'logical' ifIndex assigned to
this MLT.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.17.10.1.11
rcMltMltType
MLT type.
Enumerationr/w
Enumerated Values:
1normalMLT
2istMLT
3splitMLT
 .1.3.6.1.4.1.2272.1.17.10.1.12
rcMltRunningType
Split MLT running type.
Enumeration
Enumerated Values:
1normalMLT
2istMLT
3splitMLT
 .1.3.6.1.4.1.2272.1.17.10.1.14
rcMltMulticastDistribution
Enable/Disable multicast distribution per mlt.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.17.10.1.16
rcMltAggregatable
Enable/Disable link aggregation on a MLT.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.17.10.1.18
rcMltClearLinkAggregate
clear link aggregate, equivalent to disable and
re-enable aggregatable on the MLT.
Enumerationr/w
Enumerated Values:
1clear
2none
 .1.3.6.1.4.1.2272.1.17.10.1.19
rcMltDesignatedPort
Indicates the Designated port for the MLT.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.17.10.1.21
rcMltAggOperState
Link aggregation state on a MLT.
EnableValue
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.17.10.1.22
rcMltAggTimeOfLastOperChange
The time value since the interface entered its
current operational state.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.17.10.1.23
rcMltPeerPortMembers
The set of Peer ports which are connected to local ports
(rcMltPortMember) of this MLT
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.17.10.1.39
rcMltCpLimitPktRate
Used to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.
Integer32r/w
Constraints:
range: 1000-20000
 .1.3.6.1.4.1.2272.1.17.10.1.40
rcMltCpLimitShutDownEnable
Used to indicate if the mlt-ports should be
shutdown when the CpLimitPktRate is exceeded.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.17.10.1.41
rcMltVlanIdList
This bitfield is used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents Vlan Id 1.
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.17.10.1.42
rcMltEntryOwner
Defines the owner of the MLT.
Enumeration
Enumerated Values:
1none
2local
3remote
4localAndRemote
 .1.3.6.1.4.1.2272.1.17.10.1.43
rcMltDatapathProgrammingState
Defines the datapath programming state of
the MLT.
Enumeration
Enumerated Values:
1none
2local
3remote
4localAndRemote
 .1.3.6.1.4.1.2272.1.17.10.1.44

rcSyslogHostTbl

table
.1.3.6.1.4.1.2272.1.22.2 · 1 row entry · 20 columns
Open in standard view 
Table of remote host destinations for syslog.
rcSyslogHostEntry entry .1.3.6.1.4.1.2272.1.22.2.1
Entry containing information for a particular
entry in rcSyslogHostTable.
Indexes
rcSyslogHostId
Column Syntax OID
rcSyslogHostId
Host Id.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.22.2.1.1
rcSyslogHostIpAddr deprecated
Host Ip Address
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.22.2.1.2
rcSyslogHostUdpPort
Specifies the UDP port to use to send syslog
messages to the host.
Integer32r/w
Constraints:
range: 514-530
 .1.3.6.1.4.1.2272.1.22.2.1.3
rcSyslogHostFacility
Specifies the UNIX facility used in messages
to the syslog host. Default is LOCAL7.
Enumerationr/w
Enumerated Values:
128local0
136local1
144local2
152local3
160local4
168local5
176local6
184local7
 .1.3.6.1.4.1.2272.1.22.2.1.4
rcSyslogHostModuleId
Specifies for which modules/tasks syslog messages
should be sent. Default is all modules/tasks.
Enumerationr/w
Enumerated Values:
1common
2snmp
4rmon
8portmgr
16chasmgr
32bridge
64ospf
128hwif
256sim
512cpp
1024netdrv
2048vlanmgr
4096cli
8192main
16384p2ip
32768rcip
65536rompager
131072acif
262144gbip
524288wdt
1048576tdp
2097152mandiag
4194304mantest
8388608igmp
16777216ipfil
33554432mlt
67108864ippolicy
134217728ipmc
268435456syslog
 .1.3.6.1.4.1.2272.1.22.2.1.5
rcSyslogHostModuleId2
Specifies for which modules/tasks syslog messages
should be sent. Default is all modules/tasks.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.22.2.1.6
rcSyslogHostSeverity
Specifies the severity level for which syslog messages
should be sent for the modules specifies in
'SyslogHostModule'.
Value is one of multiple (logical 'OR') of the following:
info(1),
warning(2),
error(4),
mfg(8)…
Integer32r/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2272.1.22.2.1.7
rcSyslogHostMapInfoSeverity
Specifies the syslog severity to use for Accelar
INFO messages. Default is INFO.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.8
rcSyslogHostMapWarningSeverity
Specifies the syslog severity to use for Accelar
WARNING messages. Default is WARNING. Should be
<= INFO.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.9
rcSyslogHostMapErrorSeverity
Specifies the syslog severity to use for Accelar
ERROR messages. Default is ERROR. Should be
<= WARNING.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.10
rcSyslogHostMapMfgSeverity
Specifies the syslog severity to use for Accelar
Manufactoring messages. Dafault is ERROR.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.11
rcSyslogHostMapFatalSeverity
Specifies the syslog severity to use for Accelar
FATAL messages. Default is EMERGENCY. Should be
<= ERROR.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.12
rcSyslogHostMapTraceMsg
Specifies the syslog severity to use for syslog
trace messages. Default is DEBUG.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.13
rcSyslogHostMapTrapMsg
Specifies the UNIX severity code to use for syslog
messages for SNMP traps sent to the syslog host.
Default is INFO.
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2272.1.22.2.1.14
rcSyslogHostLogTraceMsgs
Indicate whether to activate the host to log the
syslog trace messages.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.22.2.1.15
rcSyslogHostLogTrapMsgs
Indicate whether to activate the host to log the
syslog messages for SNMP traps.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.22.2.1.16
rcSyslogHostEnable
Enable/Disable messages to be sent to syslog host.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.22.2.1.17
rcSyslogHostRowStatus
Used to create/delete entries in the rcSyslogTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.22.2.1.18
rcSyslogHostAddressType
Address Type of the Host.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.22.2.1.19
rcSyslogHostAddress
Address of the Host.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.22.2.1.20

rcDiagMirrorByPortTable

table
.1.3.6.1.4.1.2272.1.23.1 · 1 row entry · 16 columns
Open in standard view 
This table is used to configure the Mirror By
Port feature.  This feature allows the device
to forward a copy of each packet seen on a
particular port to a different port.
rcDiagMirrorByPortEntry entry .1.3.6.1.4.1.2272.1.23.1.1
Entry containing mirror by port information.
Indexes
rcDiagMirrorByPortId
Column Syntax OID
rcDiagMirrorByPortId
Entry id.
Integer32
Constraints:
range: 1-479
 .1.3.6.1.4.1.2272.1.23.1.1.1
rcDiagMirrorByPortMirroredPort
Used to configure the 'mirrored' port. The port
where packets are copied from.
InterfaceIndexr/w
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.23.1.1.2
rcDiagMirrorByPortMirroringPort
Used to configure the 'mirroring' port. The port
where packets are copied to.
InterfaceIndexr/w
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.23.1.1.3
rcDiagMirrorByPortMode
Used to configure the 'mode' of the mirror operation.
'tx' means packets being transmitted on the 'mirrored'
port will be copied. 'rx' means packets received on
the 'mirrored' port will be copied. 'both' means
all tra…
Enumerationr/w
Enumerated Values:
1tx
2rx
3both
 .1.3.6.1.4.1.2272.1.23.1.1.4
rcDiagMirrorByPortEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.1.1.5
rcDiagMirrorByPortRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.1.1.6
rcDiagMirrorByPortPid
Pid for a port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.1.1.8
rcDiagMirrorRemoteMirrorVlanId
vlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packet
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.23.1.1.9
rcDiagMirrorByPortMirroredPortList
Used to configure the 'mirrored' port. The port
where packets are copied from.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.1.1.12
rcDiagMirrorByPortMirroringPortList
Used to configure the 'mirroring' port. The port
where packets are copied from.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.23.1.1.13
rcDiagMirrorMirroringVlanId
Destination is a VLAN.
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.23.1.1.14
rcDiagMirrorMirroringMltId
Destination is an MLT.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.23.1.1.15
rcDiagMirrorMirroringMgId
Contains information about the MGID allocated.
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2272.1.23.1.1.16
rcDiagMirrorMirroringIpAddr
Destination IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.1.1.17
rcDiagMirrorMirroringIpTtl
Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl.
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.2272.1.23.1.1.18
rcDiagMirrorMirroringIpDscp
Dscp value for mirrored packets when mirror
destination is IP. If other than default,
the encapsulated packet will have the given
Dscp value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.1.1.19

rcDiagPortConvSteeringTable

table
.1.3.6.1.4.1.2272.1.23.2 · 1 row entry · 7 columns
Open in standard view 
Diag Port Conv Steering Table
rcDiagPortConvSteeringEntry entry .1.3.6.1.4.1.2272.1.23.2.1
Entry containing information of Diag Port Conv Steering.
Indexes
rcDiagPortConvSteeringId
Column Syntax OID
rcDiagPortConvSteeringId
Entry id.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.1
rcDiagPortConvSteeringPortOne
IfIndex for port one
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.2
rcDiagPortConvSteeringPortTwo
IfIndex for port two
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.3
rcDiagPortConvSteeringMode
Used to specify the traffic flow that should be
captured between ports one and two.
Enumerationr/w
Enumerated Values:
1oneToTwo
2twoToOne
3both
 .1.3.6.1.4.1.2272.1.23.2.1.4
rcDiagPortConvSteeringForwardPort
IfIndex of the port where captured traffic should
be forwarded to.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.2.1.5
rcDiagPortConvSteeringEnable
Enable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.2.1.6
rcDiagPortConvSteeringRowStatus
Used to create/delete entries in the rcDiagMirrorByPortTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.2.1.7

rcDiagMacConvSteeringTable

table
.1.3.6.1.4.1.2272.1.23.3 · 1 row entry · 7 columns
Open in standard view 
Diag Mac Conv Steering Table
rcDiagMacConvSteeringEntry entry .1.3.6.1.4.1.2272.1.23.3.1
Entry containing information of Diag Mac Conv Steering.
Indexes
rcDiagMacConvSteeringId
Column Syntax OID
rcDiagMacConvSteeringId
Entry id.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.1
rcDiagMacConvSteeringSrcMac
Source MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.3.1.2
rcDiagMacConvSteeringDstMac
Destination MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.3.1.3
rcDiagMacConvSteeringInPort
IfIndex of ingress port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.4
rcDiagMacConvSteeringForwardPort
IfIndex of the port where captured traffic should
be forwarded to.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.23.3.1.5
rcDiagMacConvSteeringEnable
Enable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.3.1.6
rcDiagMacConvSteeringRowStatus
Used to create/delete entries in the rcDiagMirrorByPortTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.3.1.7

rcDiagPcapFilterTable

table
.1.3.6.1.4.1.2272.1.23.15.11 · 1 row entry · 33 columns
Open in standard view 
A table used to store pcap secondary filters
rcDiagPcapFilterEntry entry .1.3.6.1.4.1.2272.1.23.15.11.1
Pcap secondary filter desc
Indexes
rcDiagPcapFilterId
Column Syntax OID
rcDiagPcapFilterId
Unique ID that represents the filter
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.15.11.1.1
rcDiagPcapFilterEnable
Filter is enabled or not
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.23.15.11.1.2
rcDiagPcapFilterAction
Action to be takesn when policy is matched
Enumerationr/w
Enumerated Values:
0drop
1capture
2trigger-on
3trigger-off
 .1.3.6.1.4.1.2272.1.23.15.11.1.3
rcDiagPcapFilterSrcMac
Soruce mac address to match
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.15.11.1.4
rcDiagPcapFilterSrcMask
Soruce mac address mask. Used to specify a range
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.23.15.11.1.5
rcDiagPcapFilterIsInverseSrcMac
Soruce mac address Inverse. when set the mac
addresses otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.6
rcDiagPcapFilterDstMac
Destination mac address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.23.15.11.1.7
rcDiagPcapFilterDstMask
Destination mac address mask. Used to specify a range
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.23.15.11.1.8
rcDiagPcapFilterIsInverseDstMac
Destination mac address Inverse. when set the mac
addresses otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.9
rcDiagPcapFilterVlanId
Vlan-id of the packet to be matched
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.23.15.11.1.10
rcDiagPcapFilterToVlanId
To Vlan-id. Used to specify a range
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.23.15.11.1.11
rcDiagPcapFilterIsInverseVlanId
Vlan-Id Inverse. when set the Vlan-Id
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.12
rcDiagPcapFilterPbit
pBit of the packet to be matched
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.23.15.11.1.13
rcDiagPcapFilterToPbit
To pBit. Used to specify a range
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.23.15.11.1.14
rcDiagPcapFilterIsInversePbit
pBit Inverse. when set the pBit
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.15
rcDiagPcapFilterEtherType
EtherType of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.11.1.16
rcDiagPcapFilterToEtherType
To EtherType. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.11.1.17
rcDiagPcapFilterIsInverseEtherType
EtherType Inverse. when set the EtherType
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.18
rcDiagPcapFilterProtocolType
ProtocolType of the packet to be matched
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.15.11.1.19
rcDiagPcapFilterToProtocolType
To ProtocolType. Used to specify a range
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.23.15.11.1.20
rcDiagPcapFilterIsInverseProtocolType
ProtocolType Inverse. when set the ProtocolType
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.21
rcDiagPcapFilterSrcIp
Source IP address of the packet to be matched
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.22
rcDiagPcapFilterToSrcIp
To Source IP address. Used to specify a range
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.23
rcDiagPcapFilterIsInverseSrcIp
Source IP address Inverse. when set the source IP
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.24
rcDiagPcapFilterDstIp
Destination IP address of the packet to be matched
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.25
rcDiagPcapFilterToDstIp
To Destination IP address. Used to specify a range
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.23.15.11.1.26
rcDiagPcapFilterIsInverseDstIp
Destination IP address Inverse. when set the
Destination IP otherthan specified is range
matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.27
rcDiagPcapFilterDscp
DSCP value of the packet to be matched
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.15.11.1.28
rcDiagPcapFilterToDscp
To DSCP. Used to specify a range
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.23.15.11.1.29
rcDiagPcapFilterIsInverseDscp
DSCP Inverse. when set the DSCP
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.30
rcDiagPcapFilterRowStatus
Row Status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.15.11.1.31
rcDiagPcapFilterDscpMatchZero
When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.32
rcDiagPcapFilterPbitMatchZero
When this value is set to true, then 0 value of
Pbit is not taken as disable value. The user will
be allowed to capture packets with Pbit value of
0 also. Be default it would be set to FALSE
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.11.1.33

rcDiagPcapAdvancedFilterTable

table
.1.3.6.1.4.1.2272.1.23.15.13 · 1 row entry · 15 columns
Open in standard view 
A table used to store pcap secondary filters
rcDiagPcapAdvancedFilterEntry entry .1.3.6.1.4.1.2272.1.23.15.13.1
Pcap secondary Advanced filter desc
Indexes
rcDiagPcapAdvancedFilterId
Column Syntax OID
rcDiagPcapAdvancedFilterId
Unique ID that represents the filter
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.23.15.13.1.1
rcDiagPcapAdvancedFilterUdpPort
UdpPort of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.2
rcDiagPcapAdvancedFilterToUdpPort
To UdpPort. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.3
rcDiagPcapAdvancedFilterIsInverseUdpPort
UdpPort Inverse. when set the UdpPort
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.4
rcDiagPcapAdvancedFilterTcpPort
TcpPort of the packet to be matched
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.5
rcDiagPcapAdvancedFilterToTcpPort
To TcpPort. Used to specify a range
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.6
rcDiagPcapAdvancedFilterIsInverseTcpPort
TcpPort Inverse. when set the TcpPort
otherthan specified range is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.7
rcDiagPcapAdvancedFilterUserDefinedData
User defined data to match with the packets received
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.23.15.13.1.8
rcDiagPcapAdvancedFilterUserDefinedDataSize
Length of user defined data
Integer32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.2272.1.23.15.13.1.9
rcDiagPcapAdvancedFilterUserDefinedOffset
Offset from which match has to start
Integer32r/w
Constraints:
range: 0-9600
 .1.3.6.1.4.1.2272.1.23.15.13.1.10
rcDiagPcapAdvancedFilterIsInverseUserDefined
TcpPort Inverse. when set the Userdata
otherthan specified is matched
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.23.15.13.1.11
rcDiagPcapAdvancedFilterTimer
Timer to start the pcap capture window in ms
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.23.15.13.1.12
rcDiagPcapAdvancedFilterPacketCount
Number of packets to be captured before disabling pcap
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.23.15.13.1.13
rcDiagPcapAdvancedFilterRefreshTimer
Refresh timer in ms
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.23.15.13.1.14
rcDiagPcapAdvancedFilterRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.23.15.13.1.15

rcPosPppIpxTable

table
.1.3.6.1.4.1.2272.1.26.1 · 1 row entry · 5 columns
Open in standard view
rcPosPppIpxEntry entry .1.3.6.1.4.1.2272.1.26.1.1
Indexes
rcPosPppIpxIfIndex
Column Syntax OID
rcPosPppIpxIfIndex
port number.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.26.1.1.1
rcPosPppIpxIpxcpAdminStatus Enumerationr/w
Enumerated Values:
1open
2close
 .1.3.6.1.4.1.2272.1.26.1.1.2
rcPosPppIpxOperStatus Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.26.1.1.3
rcPosPppIpxNetAddr
IPX Network address.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.26.1.1.4
rcPosPppIpxRoutingProtocol Enumerationr/w
Enumerated Values:
0none
2rip
 .1.3.6.1.4.1.2272.1.26.1.1.5

rcPosSonetTable

table
.1.3.6.1.4.1.2272.1.26.2 · 1 row entry · 14 columns
Open in standard view
rcPosSonetEntry entry .1.3.6.1.4.1.2272.1.26.2.1
Indexes
rcPosSonetIndex
Column Syntax OID
rcPosSonetIndex
pos ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.26.2.1.1
rcPosSonetFraming Enumerationr/w
Enumerated Values:
1sonet
2sdh
 .1.3.6.1.4.1.2272.1.26.2.1.2
rcPosSonetSectionTrace
config. J0 byte
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.26.2.1.3
rcPosSonetSectionGrowth
config. Z0 byte
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.26.2.1.4
rcPosSonetSyncronization
config. S1 byte
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.26.2.1.5
rcPosSonetStsPathTrace
config. 64/16 byte.
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.2272.1.26.2.1.6
rcPosSonetPathSignalLabel
config. C2 byte
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.26.2.1.7
rcPosSonetClockSource Enumerationr/w
Enumerated Values:
1line
2internal
 .1.3.6.1.4.1.2272.1.26.2.1.8
rcPosSonetScramble EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.26.2.1.9
rcPosSonetOperStatusFraming SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.2.1.10
rcPosSonetOperStatusClockSource SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.2.1.11
rcPosSonetOperStatusScramble EnableValue
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.26.2.1.12
rcPosSonetOperStatusSectionTrace SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.2.1.13
rcPosSonetOperStatusPathSignalLabel SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.2.1.14

rcPosLineStatusTable

table
.1.3.6.1.4.1.2272.1.26.3 · 1 row entry · 10 columns
Open in standard view 
Pos Line Status Table
rcPosLineStatusEntry entry .1.3.6.1.4.1.2272.1.26.3.1
Entry containing information of Pos Line Status.
Indexes
rcPosLineStatusIndex
Column Syntax OID
rcPosLineStatusIndex
pos ifIndex, same as rcPosPppIpxIfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.26.3.1.1
rcPosLineStatusLocalMACAddress
current local MAC address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.3.1.2
rcPosLineStatusRemoteMACAddress
current remote MAC address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.3.1.3
rcPosLineStatusLocalIpAddr
current local ip addr
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.26.3.1.4
rcPosLineStatusRemoteIpAddr
current remote ip addr
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.26.3.1.5
rcPosLineStatusOutQuality
current output quality.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.3.1.6
rcPosLineStatusLocalPeriod SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.3.1.7
rcPosLineStatusDeviceType SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.3.1.8
rcPosLineStatusDeviceRev SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.3.1.9
rcPosLineStatusIpxRoutingProtocol SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.3.1.10

rcPosLineConfigTable

table
.1.3.6.1.4.1.2272.1.26.4 · 1 row entry · 12 columns
Open in standard view 
Pos Line Config Table
rcPosLineConfigEntry entry .1.3.6.1.4.1.2272.1.26.4.1
Entry containing information of Pos Line Config.
Indexes
rcPosLineConfigIndex
Column Syntax OID
rcPosLineConfigIndex
pos ifIndex, same as rcPosPppIpxIfIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.26.4.1.1
rcPosLineConfigLocalMACAddress
current local MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.4.1.2
rcPosLineConfigRemoteMACAddress
current remote MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.4.1.3
rcPosLineConfigLocalIpAddr
current local ip addr
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.26.4.1.4
rcPosLineConfigRemoteIpAddr
current remote ip addr
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.26.4.1.5
rcPosLineConfigRemoteReportPeriod
config. remote report period.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.26.4.1.6
rcPosLineConfigLqrThreshold
config. input quality.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.26.4.1.7
rcPosLineConfigOutQuality
config. output quality.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.4.1.8
rcPosLineConfigPppStp
STP PPP encoding enable T/F
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.26.4.1.9
rcPosLineConfigLoopBack
perform loop-back.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.26.4.1.10
rcPosLineConfigIpxVlanMacAddress SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.4.1.11
rcPosLineConfigIpxRemoteMacAddress SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.26.4.1.12

rcPosSioCardConfigTable

table
.1.3.6.1.4.1.2272.1.26.6 · 1 row entry · 4 columns
Open in standard view 
Pos Sio Card Config Table
rcPosSioCardConfigEntry entry .1.3.6.1.4.1.2272.1.26.6.1
Entry containing information of Pos Sio Card Config.
Indexes
rcPosSioCardConfigSlotIndex
Column Syntax OID
rcPosSioCardConfigSlotIndex
slot Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.26.6.1.1
rcPosSioCardConfigAction Enumerationr/w
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.2272.1.26.6.1.2
rcPosSioCardConfigTraceMode Enumerationr/w
Enumerated Values:
0other
1traceOn
 .1.3.6.1.4.1.2272.1.26.6.1.3
rcPosSioCardConfigImageFileName
POS Image file name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.26.6.1.4

rcPosOperStatusTable

table
.1.3.6.1.4.1.2272.1.26.7 · 1 row entry · 5 columns
Open in standard view
rcPosOperStatusEntry entry .1.3.6.1.4.1.2272.1.26.7.1
Indexes
rcPosOperStatusIndex
Column Syntax OID
rcPosOperStatusIndex
pos ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.26.7.1.1
rcPosOperStatusLqrStatus
Operational status of pppLqrConfigStatus.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.7.1.2
rcPosOperStatusLineLqrThreshold
.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.7.1.3
rcPosOperStatusLinkMagicNumber
.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.26.7.1.4
rcPosOperStatusLinePppStp EnableValue
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.26.7.1.5

rcRadiusServTable

table deprecated
.1.3.6.1.4.1.2272.1.29.3 · 1 row entry · 29 columns
Open in standard view 
The RADIUS table (0 to 10 entries).  This
table lists the information of the RADIUS server.
rcRadiusServEntry entry .1.3.6.1.4.1.2272.1.29.3.1
A RADIUS server table entry.
Indexes
rcRadiusServAddress rcRadiusServUsedBy
Column Syntax OID
rcRadiusServPriority deprecated
Server priority, used to control which server to choose
first to send authentication.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.29.3.1.1
rcRadiusServAddress deprecated
Server IP address of the RADIUS authentication server
referred to in this table entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.29.3.1.2
rcRadiusServTimeOut deprecated
The time interval in seconds before the client
retransmit the packet.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.2272.1.29.3.1.3
rcRadiusServEnable deprecated
Enable or disable this server.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.29.3.1.4
rcRadiusServMaxRetries deprecated
Maximum number of retransmissions.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.2272.1.29.3.1.5
rcRadiusServUdpPort deprecated
The UDP port the client is using to send requests
to this server.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.2272.1.29.3.1.6
rcRadiusServSecretKey deprecated
The identifier of the RADIUS authentication client.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.29.3.1.7
rcRadiusServAccessRequests deprecated
The number of RADIUS access-response packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.8
rcRadiusServAccessAccepts deprecated
The number of RADIUS access-accept packets (valid or
invalid) received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.9
rcRadiusServAccessRejects deprecated
The number of RADIUS access-reject packets (valid or
invalid) received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.10
rcRadiusServBadResponses deprecated
The number of RADIUS invalid access-response packets
received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.11
rcRadiusServPendingRequests deprecated
The number of RADIUS access-request packets destined
for this server that have not yet timed out or
received a response. This variable is incremented
when an access-request is sent and decremented due
to receipt of …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.12
rcRadiusServClientRetries deprecated
The number of authentication retransmission to
this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.13
rcRadiusServRowStatus deprecated
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.29.3.1.14
rcRadiusServAcctEnable deprecated
Enable or disable Radius Accounting on this server.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.29.3.1.15
rcRadiusServAcctUdpPort deprecated
The UDP port the client used to send accounting
requests to this server.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.2272.1.29.3.1.16
rcRadiusServAcctOnRequests deprecated
The number of RADIUS accounting-on packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.17
rcRadiusServAcctOffRequests deprecated
The number of RADIUS accounting-off packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.18
rcRadiusServAcctStartRequests deprecated
The number of RADIUS accounting-start packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.19
rcRadiusServAcctStopRequests deprecated
The number of RADIUS accounting-stop packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.20
rcRadiusServAcctInterimRequests deprecated
The number of RADIUS accounting-interim packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.21
rcRadiusServAcctBadResponses deprecated
The number of Invalid responses received from this
server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.22
rcRadiusServAcctPendingRequests deprecated
The number of RADIUS accounting packets that are waiting
be sent to this server. This variable is incremented
whenever any accounting-request is sent to this server and
decremented when an acknowledgement is received or…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.23
rcRadiusServAcctClientRetries deprecated
The number of RADIUS accounting packets retransmitted
to this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.24
rcRadiusServUsedBy deprecated
cli(1): for cli login, igap(2): for igap,snmp(3):
for snmp login, eap(4) for EAP PAE Authenticator
web(5) for web-server(http/https) login.
Enumeration
Enumerated Values:
1cli
2igap
3snmp
4eap
5web
 .1.3.6.1.4.1.2272.1.29.3.1.25
rcRadiusServNasIpAddress deprecated
RADIUS Client NAS Identifier for this server.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.29.3.1.26
rcRadiusServRoundTripTime deprecated
Time different between the instance when
a RADIUS request is sent and the
corresponding response is received.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.29.3.1.27
rcRadiusServAccessChallanges deprecated
The number of RADIUS access-challanges packets
sent to this server. This does not include
retransmission.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.3.1.28
rcRadiusServSourceIpAddr deprecated
source IP address RADIUS packets.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.29.3.1.29

rcRadiusServHostTable

table
.1.3.6.1.4.1.2272.1.29.5 · 1 row entry · 30 columns
Open in standard view 
The RADIUS Server Host table (0 to 10 entries).  This
table lists the information of the RADIUS server.
rcRadiusServHostEntry entry .1.3.6.1.4.1.2272.1.29.5.1
A RADIUS server table entry.
Indexes
rcRadiusServHostAddressType rcRadiusServHostAddress rcRadiusServHostUsedBy
Column Syntax OID
rcRadiusServHostAddressType
Inet Address Type of radius server host address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.29.5.1.1
rcRadiusServHostAddress
Server IP address of the RADIUS authentication server
referred to in this table entry.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.29.5.1.2
rcRadiusServHostUsedBy
cli(1): for cli login, igap(2): for igap,snmp(3):
for snmp login, eap(4) for EAP PAE Authenticator
web(5) for web-server(http/https) login.
IGAP is not supported on the VSP 9000.
Enumeration
Enumerated Values:
1cli
3snmp
4eap
5web
 .1.3.6.1.4.1.2272.1.29.5.1.3
rcRadiusServHostPriority
Server priority, used to control which server to choose
first to send authentication.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.29.5.1.4
rcRadiusServHostTimeOut
The time interval in seconds before the client
retransmit the packet.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.2272.1.29.5.1.5
rcRadiusServHostEnable
Enable or disable this server.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.29.5.1.6
rcRadiusServHostMaxRetries
Maximum number of retransmissions.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.2272.1.29.5.1.7
rcRadiusServHostUdpPort
The UDP port the client is using to send requests
to this server.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.2272.1.29.5.1.8
rcRadiusServHostSecretKey
The identifier of the RADIUS authentication client.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.29.5.1.9
rcRadiusServHostAccessRequests
The number of RADIUS access-response packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.10
rcRadiusServHostAccessAccepts
The number of RADIUS access-accept packets (valid or
invalid) received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.11
rcRadiusServHostAccessRejects
The number of RADIUS access-reject packets (valid or
invalid) received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.12
rcRadiusServHostBadResponses
The number of RADIUS invalid access-response packets
received from this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.13
rcRadiusServHostPendingRequests
The number of RADIUS access-request packets destined
for this server that have not yet timed out or
received a response. This variable is incremented
when an access-request is sent and decremented due
to receipt of …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.14
rcRadiusServHostClientRetries
The number of authentication retransmission to
this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.15
rcRadiusServHostRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.29.5.1.16
rcRadiusServHostAcctEnable
Enable or disable Radius Accounting on this server.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.29.5.1.17
rcRadiusServHostAcctUdpPort
The UDP port the client used to send accounting
requests to this server.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.2272.1.29.5.1.18
rcRadiusServHostAcctOnRequests
The number of RADIUS accounting-on packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.19
rcRadiusServHostAcctOffRequests
The number of RADIUS accounting-off packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.20
rcRadiusServHostAcctStartRequests
The number of RADIUS accounting-start packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.21
rcRadiusServHostAcctStopRequests
The number of RADIUS accounting-stop packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.22
rcRadiusServHostAcctInterimRequests
The number of RADIUS accounting-interim packets sent to
this server. This does not include retransmissions.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.23
rcRadiusServHostAcctBadResponses
The number of Invalid responses received from this
server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.24
rcRadiusServHostAcctPendingRequests
The number of RADIUS accounting packets that are waiting
be sent to this server. This variable is incremented
whenever any accounting-request is sent to this server and
decremented when an acknowledgement is received or…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.25
rcRadiusServHostAcctClientRetries
The number of RADIUS accounting packets retransmitted
to this server.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.26
rcRadiusServHostNasIpAddress
RADIUS Client NAS Identifier for this server.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.29.5.1.27
rcRadiusServHostRoundTripTime
Time different between the instance when
a RADIUS request is sent and the
corresponding response is received.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.29.5.1.28
rcRadiusServHostAccessChallanges
The number of RADIUS access-challanges packets
sent to this server. This does not include
retransmission.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.29.5.1.29
rcRadiusServHostSourceIpAddr
source IP address RADIUS packets.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.29.5.1.30

rcIgmpInterfaceExtnTable

table
.1.3.6.1.4.1.2272.1.30.1 · 1 row entry · 32 columns
Open in standard view
rcIgmpInterfaceExtnEntry entry .1.3.6.1.4.1.2272.1.30.1.1
Indexes
rcIgmpInterfaceExtnIfIndex
Column Syntax OID
rcIgmpInterfaceExtnIfIndex
ifindex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.1.1.1
rcIgmpInterfaceExtnSnoopEnable
enable snoop.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.2
rcIgmpInterfaceExtnProxySnoopEnable
enable proxy snoop.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.3
rcIgmpInterfaceExtnMaxAdvertiseInterval Integer32r/w
Constraints:
range: 2-180
 .1.3.6.1.4.1.2272.1.30.1.1.4
rcIgmpInterfaceExtnMinAdvertiseInterval Integer32r/w
Constraints:
range: 3-180
 .1.3.6.1.4.1.2272.1.30.1.1.5
rcIgmpInterfaceExtnMaxInitialAdvertiseInterval Integer32r/w
Constraints:
range: 2-180
 .1.3.6.1.4.1.2272.1.30.1.1.6
rcIgmpInterfaceExtnMaxInitialAdvertments Integer32r/w
Constraints:
range: 2-15
 .1.3.6.1.4.1.2272.1.30.1.1.7
rcIgmpInterfaceExtnNeighborDeadInterval Integer32r/w
Constraints:
range: 2-180
 .1.3.6.1.4.1.2272.1.30.1.1.8
rcIgmpInterfaceExtnFastLeaveEnable
Enable fast leave on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.9
rcIgmpInterfaceExtnFastLeavePortMembers
The set of ports that are enabled for fast leave.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.1.1.10
rcIgmpInterfaceExtnMrdiscEnable
Enable/disable multicast router discovery.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.11
rcIgmpInterfaceExtnDiscoveredRouterPorts
list of ports that discovered by
IGMP Multicast router discovery
(MRDISC) protocol.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.1.1.12
rcIgmpInterfaceExtnSnoopMRouterPorts
The set of ports in this interface that provide
connectivity to an IP Multicast router.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.1.1.13
rcIgmpInterfaceExtnSnoopActiveMRouterPorts
Active ports.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.1.1.14
rcIgmpInterfaceExtnSnoopMRouterExpiration
Multicast querier router aging time out.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.1.1.15
rcIgmpInterfaceExtnFlushAction
IGMP flush action.
Enumerationr/w
Enumerated Values:
1none
2flushGrpMember
3flushMrouter
4flushSender
 .1.3.6.1.4.1.2272.1.30.1.1.16
rcIgmpInterfaceExtnRouterAlertEnable
Enable Router Alert Check.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.1.1.17
rcIgmpInterfaceExtnSsmEnable
enable SSM.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.18
rcIgmpInterfaceExtnAccntEnable
enable/disable accounting.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.1.1.20
rcIgmpInterfaceExtnAuthEnable
enable/disable authentication.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.1.1.21
rcIgmpInterfaceExtnStreamLimitEnable
Stream Limitation enable/disable.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.1.1.22
rcIgmpInterfaceExtnMaxStreams
Maximum number of stream.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.1.1.23
rcIgmpInterfaceExtnNumStreams
Current number of streams.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.1.1.24
rcIgmpInterfaceExtnNewQuerier
The address of the New IGMP Querier on
the IP subnet to which this interface is
attached.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.1.1.25
rcIgmpInterfaceExtnSnoopQuerierEnable
enable snoop querier.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.26
rcIgmpInterfaceExtnSnoopQuerierAddr
The pseudo address of the IGMP Snoop Querier.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.1.1.27
rcIgmpInterfaceExtnMvrEnable
Enable or disable mcast-vlan-registration on a vlan, it
is used to specified a vlan works as a mcast-vlan,
maximum 16 mcast-vlan is supported.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.28
rcIgmpInterfaceExtnMvrProxyEnable
enable or disable mcast-vlan-registration proxy on a vlan,
you must enable mcast-vlan-registration at first.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.29
rcIgmpInterfaceExtnDynamicDowngradeEnable
enable dynamic downgrade the IGMP version when older version query message was received.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.30
rcIgmpInterfaceExtnCompatibilityModeEnable
enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.31
rcIgmpInterfaceExtnOperVersion
The operational version of IGMP which is running on this interface.
Enumeration
Enumerated Values:
1version1
2version2
3version3
 .1.3.6.1.4.1.2272.1.30.1.1.32
rcIgmpInterfaceExtnExplicitHostTrackingEnable
Enable the IGMP protocol running in version 3 to track hosts per channels/groups.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.1.1.33

rcIgmpStaticTable

table
.1.3.6.1.4.1.2272.1.30.2 · 1 row entry · 6 columns
Open in standard view
rcIgmpStaticEntry entry .1.3.6.1.4.1.2272.1.30.2.1
Indexes
rcIgmpStaticIfIndex rcIgmpStaticGrpAddr
Column Syntax OID
rcIgmpStaticIfIndex
ifindex
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.2.1.1
rcIgmpStaticGrpAddr
Ip multicast address. The GrpAddress holds the starting
range for the address range. If the ToGrpAddress is not
entered, the it is as good as entering a single address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.2.1.2
rcIgmpStaticMemberPorts
egressing ports.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.2.1.3
rcIgmpStaticNotAllowedToJoin
not allowed to join.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.2.1.4
rcIgmpStaticRowStatus
Used to create/delete entries in the rcIgmpStaticEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.2.1.5
rcIgmpStaticToGrpAddr
To hold the range for the GrpAddress.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.2.1.6

rcIgmpAccessTable

table
.1.3.6.1.4.1.2272.1.30.3 · 1 row entry · 6 columns
Open in standard view
rcIgmpAccessEntry entry .1.3.6.1.4.1.2272.1.30.3.1
Indexes
rcIgmpAccessIfIndex rcIgmpAccessGrpAddr rcIgmpAccessHostAddr rcIgmpAccessHostMask
Column Syntax OID
rcIgmpAccessIfIndex
ifindex
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.3.1.1
rcIgmpAccessGrpAddr
ip multicast addr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.3.1.2
rcIgmpAccessHostAddr
host addr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.3.1.3
rcIgmpAccessMode
denyTX(1), denyRX(2), denyBOTH(3).
Enumerationr/w
Enumerated Values:
1denyTX
2denyRX
3denyBOTH
 .1.3.6.1.4.1.2272.1.30.3.1.4
rcIgmpAccessRowStatus
Used to create/delete entries in the rcIgmpAccessEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.3.1.5
rcIgmpAccessHostMask
host mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.3.1.6

rcIgmpSenderTable

table
.1.3.6.1.4.1.2272.1.30.4 · 1 row entry · 6 columns
Open in standard view
rcIgmpSenderEntry entry .1.3.6.1.4.1.2272.1.30.4.1
Indexes
rcIgmpSenderGrpAddr rcIgmpSenderIfIndex rcIgmpSenderMemberAddr
Column Syntax OID
rcIgmpSenderGrpAddr
ip multicast addr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.4.1.1
rcIgmpSenderIfIndex
ifindex
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.4.1.2
rcIgmpSenderMemberAddr
host addr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.4.1.3
rcIgmpSenderAction
none(0), flushEntry(1), flushGrp(2).
Enumerationr/w
Enumerated Values:
0none
1flushEntry
2flushGrp
 .1.3.6.1.4.1.2272.1.30.4.1.4
rcIgmpSenderTPort
Igmp Sender Tport.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.4.1.5
rcIgmpSenderState
Indicates if a sender exists because of an
IGMP access filter or not.
Enumeration
Enumerated Values:
1filtered
2notfiltered
 .1.3.6.1.4.1.2272.1.30.4.1.6

rcIgmpSsmTable

table deprecated
.1.3.6.1.4.1.2272.1.30.6 · 1 row entry · 6 columns
Open in standard view
rcIgmpSsmEntry entry .1.3.6.1.4.1.2272.1.30.6.1
Indexes
rcIgmpSsmIpMulticastGrp
Column Syntax OID
rcIgmpSsmIpMulticastGrp deprecated
This is the IP multicast group address
that has default range of 232/8.
This parameter should be configured by the user.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.6.1.1
rcIgmpSsmIpSource deprecated
This is the Source's IP address that will
be sending traffic to the group source.
This parameter should be configured by the user.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.6.1.2
rcIgmpSsmLearningMode deprecated
This is a read only field that provides
information if the entry is statically
configured entry (Static) or a dynamically
learned entry from IGMPv3 (Dynamic). Note
that Dynamic may not be used in the first
step of …
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.2272.1.30.6.1.3
rcIgmpSsmActivity deprecated
This is a read only field. It provides
the activity on the corresponding (S,G). If
the source is active and traffic is flowing
to the switch, this field value should be
Active, otherwise it should say non-active.
…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.6.1.4
rcIgmpSsmAdminState deprecated
The admin state provides information on
whether the entry is to be used or not. If the
value of this field is Enabled (default), then
the entry can be used. If the state is Disabled,
then the entry will not be used, …
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.6.1.5
rcIgmpSsmRowStatus deprecated
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.6.1.6

rcIgmpNewAccessTable

table
.1.3.6.1.4.1.2272.1.30.7 · 1 row entry · 7 columns
Open in standard view
rcIgmpNewAccessEntry entry .1.3.6.1.4.1.2272.1.30.7.1
Indexes
rcIgmpNewAccessIfIndex rcIgmpNewAccessPrefixListId rcIgmpNewAccessHostAddr rcIgmpNewAccessHostMask
Column Syntax OID
rcIgmpNewAccessIfIndex
ifindex
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.7.1.1
rcIgmpNewAccessPrefixListId
Prefix List ID.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.30.7.1.2
rcIgmpNewAccessPrefixListName
Prefix List name.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.30.7.1.3
rcIgmpNewAccessHostAddr
host addr.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.7.1.4
rcIgmpNewAccessHostMask
host mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.7.1.5
rcIgmpNewAccessActionMode
action mode.
Enumerationr/w
Enumerated Values:
1denyTX
2denyRX
3denyBOTH
4allowTX
5allowRX
6allowBOTH
 .1.3.6.1.4.1.2272.1.30.7.1.6
rcIgmpNewAccessRowStatus
Used to create/delete entries in the rcIgmpNewAccessEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.7.1.7

rcIgmpChannelLimitTable

table
.1.3.6.1.4.1.2272.1.30.8 · 1 row entry · 5 columns
Open in standard view
rcIgmpChannelLimitEntry entry .1.3.6.1.4.1.2272.1.30.8.1
Indexes
rcIgmpChannelLimitIfIndex rcIgmpChannelLimitPort
Column Syntax OID
rcIgmpChannelLimitIfIndex
ifindex
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.8.1.1
rcIgmpChannelLimitPort
The port belong to this vlan.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.30.8.1.2
rcIgmpChannelLimitMaxStreams
Maximum number of stream.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.30.8.1.3
rcIgmpChannelLimitNumStreams
Current number of streams.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.8.1.4
rcIgmpChannelLimitRowStatus
Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.8.1.5

rcIgmpCacheExtnTable

table
.1.3.6.1.4.1.2272.1.30.12 · 1 row entry · 2 columns
Open in standard view
rcIgmpCacheExtnEntry entry .1.3.6.1.4.1.2272.1.30.12.1
Indexes
IGMP-STD-MIBigmpCacheAddress IGMP-STD-MIBigmpCacheIfIndex
Column Syntax OID
rcIgmpCacheExtnType
It takes up either of the two values, dynamic
or static depending upon whether the entry is
learnt Dynamic or is added statically.
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.2272.1.30.12.1.1
rcIgmpCacheExtnStaticPorts
It displays the static ports for the static joins,
this would be null for the dynamic entry.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.12.1.2

rcIgmpSnoopTraceTable

table
.1.3.6.1.4.1.2272.1.30.13 · 1 row entry · 6 columns
Open in standard view 
The table listing the multicast groups
traversing the snoop enabled router
rcIgmpSnoopTraceEntry entry .1.3.6.1.4.1.2272.1.30.13.1
The entry listing the multicast groups
traversing the snoop enabled router
Indexes
rcIgmpSnoopGrpAddr rcIgmpSnoopSrcAddr rcIgmpSnoopOutVlan
Column Syntax OID
rcIgmpSnoopGrpAddr
ip mcast addr of grp traversing the router
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.13.1.1
rcIgmpSnoopSrcAddr
Ip src addr of the mcast grp address
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.13.1.2
rcIgmpSnoopOutVlan
Egress vlan id for the mcast group
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.13.1.3
rcIgmpSnoopInPort
Ingress port for the mcast grp
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.13.1.4
rcIgmpSnoopInVlan
Ingress vlan id for the mcast source
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.13.1.5
rcIgmpSnoopOutPort
Egress port of the mcast grp
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.30.13.1.6

rcIgmpNewGroupTable

table
.1.3.6.1.4.1.2272.1.30.14 · 1 row entry · 8 columns
Open in standard view 
The (conceptual) table listing the multicast
groups configured in the device.
rcIgmpNewGroupEntry entry .1.3.6.1.4.1.2272.1.30.14.1
An entry (conceptual row) representing an
Igmp group.
Indexes
rcIgmpNewGroupIpAddress rcIgmpNewGroupMembers rcIgmpNewGroupInPort
Column Syntax OID
rcIgmpNewGroupIpAddress
Multicast group Address (Class D) that others
want to join. A group address can be the same
for many incoming ports.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.14.1.1
rcIgmpNewGroupMembers
IP Address of a source that has sent group
report wishing to join this group.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.14.1.2
rcIgmpNewGroupInPort
An unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.30.14.1.3
rcIgmpNewGroupExpiration
Time left before the group report expired on this
port. Only one of this variable port. This
variable is updated upon receiving a group report.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.14.1.4
rcIgmpNewGroupIfIndex
An unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.14.1.5
rcIgmpNewGroupUserId
User-id sending this group
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.30.14.1.6
rcIgmpNewGroupMemberState
Used for IGAP, to indicated member state.
Enumeration
Enumerated Values:
1noState
2auth
3accStart
4authAndAcctStart
5authAndAcctDisabled
 .1.3.6.1.4.1.2272.1.30.14.1.7
rcIgmpNewGroupSessionTime
Used for IGAP, to indicated the session time
in seconds for the member. Session time is
started after traffic is available to member.
It can be also called AccountingTime since its
values correspondes to the accounting …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.14.1.8

rcIgmpv3CacheTable

table
.1.3.6.1.4.1.2272.1.30.24 · 1 row entry · 7 columns
Open in standard view 
The (conceptual) table listing the Igmpv3 specific data
corresponding to each interface, port  and multicast group pair on
a Router.
rcIgmpv3CacheEntry entry .1.3.6.1.4.1.2272.1.30.24.1
An entry (conceptual row) representing an Igmpv3 Group.
Indexes
rcIgmpv3CacheEntryGroupAddress rcIgmpv3CacheEntryIfIndex rcIgmpv3CacheEntryInPort
Column Syntax OID
rcIgmpv3CacheEntryGroupAddress
Multicast group Address (Class D) that others
want to join. A group address can be the same
for many incoming ports.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.24.1.1
rcIgmpv3CacheEntryIfIndex
An unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.24.1.2
rcIgmpv3CacheEntryInPort
An unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.30.24.1.3
rcIgmpv3CacheEntryModeExpiryTimer
This value is applicable only to IGMPv3-compatible nodes
and represents the time remaining before the interface
EXCLUDE state expires and the interface state transitions
to INCLUDE mode. This value can never be greater…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.24.1.4
rcIgmpv3CacheEntryVersion1HostTimer
The time remaining until the local router will assume that
there are no longer any IGMP version 1 members on the IP
subnet attached to this interface. This entry only applies
to IGMPv1 hosts. Upon hearing any IGMPv1 Re…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.24.1.5
rcIgmpv3CacheEntryVersion2HostTimer
The time remaining until the local router will assume that
there are no longer any IGMP version 2 members on the IP
subnet attached to this interface. Upon hearing any IGMPv2 Membership
Report, this value is reset to th…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.24.1.6
rcIgmpv3CacheEntrySourceFilterMode
The current group state, applicable to IGMPv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.
Enumeration
Enumerated Values:
1include
2exclude
 .1.3.6.1.4.1.2272.1.30.24.1.7

rcIgmpRouterSrcListTable

table
.1.3.6.1.4.1.2272.1.30.25 · 1 row entry · 8 columns
Open in standard view 
The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair on
a Router.
rcIgmpRouterSrcListEntry entry .1.3.6.1.4.1.2272.1.30.25.1
An entry (conceptual row) representing an
Igmp Source.
Indexes
rcIgmpRouterSrcListGroupAddress rcIgmpRouterSrcListIfIndex rcIgmpRouterSrcListInPort rcIgmpRouterSrcListHostAddress rcIgmpRouterSrcListMemberAddress
Column Syntax OID
rcIgmpRouterSrcListGroupAddress
The IP multicast group address for which this entry
contains information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.25.1.1
rcIgmpRouterSrcListIfIndex
The interface for which this entry contains information
for an IP multicast group address.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.30.25.1.2
rcIgmpRouterSrcListInPort
An unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports for this
source.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.30.25.1.3
rcIgmpRouterSrcListHostAddress
The host address to which this entry corresponds.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.25.1.4
rcIgmpRouterSrcListMemberAddress
IP Address of a member that has sent source specific
report wishing to join this source.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.25.1.5
rcIgmpRouterSrcListExpire
This value indicates the relevance of the SrcList entry,
whereby a non-zero value indicates this is an INCLUDE state
value, and a zero value indicates this to be an EXCLUDE
state value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.25.1.6
rcIgmpRouterSrcListMode
The current member state, applicable to IGMPv3-compatible
nodes. The value indicates whether the state is INCLUDE or
EXCLUDE.
Enumeration
Enumerated Values:
1include
2exclude
 .1.3.6.1.4.1.2272.1.30.25.1.7
rcIgmpRouterSrcListMemberExpire
This value indicates the time until the member for this source
will expire
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.30.25.1.8

rcIgmpNewSsmTable

table
.1.3.6.1.4.1.2272.1.30.26 · 1 row entry · 6 columns
Open in standard view
rcIgmpNewSsmEntry entry .1.3.6.1.4.1.2272.1.30.26.1
Indexes
rcIgmpNewSsmIpMulticastGrp rcIgmpNewSsmIpSource
Column Syntax OID
rcIgmpNewSsmIpMulticastGrp
This is the IP multicast group address
that has default range of 232/8.
This parameter should be configured by the user.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.26.1.1
rcIgmpNewSsmIpSource
This is the Source's IP address that will
be sending traffic to the group source.
This parameter should be configured by the user.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.30.26.1.2
rcIgmpNewSsmLearningMode
This is a read only field that provides
information if the entry is statically
configured entry (Static) or a dynamically
learned entry from IGMPv3 (Dynamic). Note
that Dynamic may not be used in the first
step of …
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.2272.1.30.26.1.3
rcIgmpNewSsmActivity
This is a read only field. It provides
the activity on the corresponding (S,G). If
the source is active and traffic is flowing
to the switch, this field value should be
Active, otherwise it should say non-active.
…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.30.26.1.4
rcIgmpNewSsmAdminState
The admin state provides information on
whether the entry is to be used or not. If the
value of this field is Enabled (default), then
the entry can be used. If the state is Disabled,
then the entry will not be used, …
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.30.26.1.5
rcIgmpNewSsmRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.30.26.1.6

rcNtpServerTable

table
.1.3.6.1.4.1.2272.1.33.2 · 1 row entry · 14 columns
Open in standard view 
The NTP server table. This table lists the information
of a NTP server
rcNtpServerEntry entry .1.3.6.1.4.1.2272.1.33.2.1
A NTP server table entry.
Indexes
rcNtpServerAddress
Column Syntax OID
rcNtpServerAddress
Server IP address of NTP time source referred to in
this table entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.33.2.1.1
rcNtpServerEnable
Enable or disable this server for participation in
time update.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.33.2.1.2
rcNtpServerAuthentication
Enable or disable the MD5 Authentication on this
serve.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.33.2.1.3
rcNtpServerKeyId
Public Key used to generate MD5 digest for this
server.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.33.2.1.4
rcNtpServerAccessAttempts
The number of NTP requests sent to this server
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.33.2.1.5
rcNtpServerAccessSuccess
The number of times this server was selected to
update the time
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.33.2.1.6
rcNtpServerAccessFailure
The number of times this server was rejected from
updating the time
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.33.2.1.7
rcNtpServerRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.33.2.1.8
rcNtpServerStratum
Stratum of this server
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.33.2.1.9
rcNtpServerVersion
NTP version of this server
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.33.2.1.10
rcNtpServerRootDelay
Root Delay of this server
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.33.2.1.11
rcNtpServerPrecision
NTP precision of this server in seconds
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.33.2.1.12
rcNtpServerReachable
NTP Reachability of this server
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.33.2.1.13
rcNtpServerSynchronized
Status of synchronization with this server
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.33.2.1.14

rcNtpKeyTable

table
.1.3.6.1.4.1.2272.1.33.3 · 1 row entry · 3 columns
Open in standard view 
The NTP key table. This table lists the private key
of the public key Id
rcNtpKeyEntry entry .1.3.6.1.4.1.2272.1.33.3.1
A NTP key table entry.
Indexes
rcNtpKeyId
Column Syntax OID
rcNtpKeyId
Public Key used to generate MD5 digest
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.33.3.1.1
rcNtpKeySecret
Private Key used to generate MD5 Digest
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.33.3.1.2
rcNtpKeyRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.33.3.1.3

rcSslMipTable

table
.1.3.6.1.4.1.2272.1.34.2 · 1 row entry · 2 columns
Open in standard view 
This table would display the MIP of the SSL blade
according to the slot number.
rcSslMipTableEntry entry .1.3.6.1.4.1.2272.1.34.2.1
This table get the MIP of the SSL blade on which
the blade is in different cluster.
Indexes
rcSslMipSlot
Column Syntax OID
rcSslMipSlot
Used as an index to find out the MIP of SSL blade.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.34.2.1.1
rcSslMipMip
Master IP of the SSL blade.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.34.2.1.2

rcTengDot3StatsTable

table
.1.3.6.1.4.1.2272.1.50.1.1 · 1 row entry · 23 columns
Open in standard view 
Statistics for a collection of ethernet-like
interfaces attached to a particular system.
rcTengDot3StatsEntry entry .1.3.6.1.4.1.2272.1.50.1.1.1
Statistics for a particular interface to an
ethernet-like medium.
Indexes
rcTengDot3StatsIndex
Column Syntax OID
rcTengDot3StatsIndex
An index value that uniquely identifies an
interface to an ethernet-like medium. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.50.1.1.1.1
rcTengDot3StatsAlignmentErrors
A count of frames received on a particular
interface that are not an integral number of
octets in length and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignme…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.2
rcTengDot3StatsFCSErrors
A count of frames received on a particular
interface that are an integral number of octets
in length but do not pass the FCS check.
The count represented by an instance of this
object is incremented when the frameCheckE…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.3
rcTengDot3StatsSingleCollisionFrames
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by exactly one collision.
A frame that is counted by an instance of this
object is also counted by the correspondi…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.4
rcTengDot3StatsMultipleCollisionFrames
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by an instance of this
object is also counted by the correspo…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.5
rcTengDot3StatsSQETestErrors
A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
message is defined in section 7.2.2.2.4 of
ANSI/IEEE 802.3-1985 and its generation is
…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.6
rcTengDot3StatsDeferredTransmissions
A count of frames for which the first
transmission attempt on a particular interface
is delayed because the medium is busy.
The count represented by an instance of this
object does not include frames involved in
coll…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.7
rcTengDot3StatsLateCollisions
The number of times that a collision is
detected on a particular interface later than
512 bit-times into the transmission of a
packet.
Five hundred and twelve bit-times corresponds
to 51.2 microseconds on a 10 Mbit/…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.8
rcTengDot3StatsExcessiveCollisions
A count of frames for which transmission on a
particular interface fails due to excessive
collisions.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.9
rcTengDot3StatsInternalMacTransmitErrors
A count of frames for which transmission on a
particular interface fails due to an internal
MAC sublayer transmit error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.10
rcTengDot3StatsCarrierSenseErrors
The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
interface.

The count represented by an instance of this
object is i…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.11
rcTengDot3StatsFrameTooLongs
A count of frames received on a particular
interface that exceed the maximum permitted
frame size.

The count represented by an instance of this
object is incremented when the frameTooLong
status is return…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.13
rcTengDot3StatsInternalMacReceiveErrors
A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instan…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.16
rcTengDot3StatsEtherChipSet
This object contains an OBJECT IDENTIFIER
which identifies the chipset used to
realize the interface. Ethernet-like
interfaces are typically built out of
several different chips. The MIB implementor
is presented with a …
ObjectIdentifier .1.3.6.1.4.1.2272.1.50.1.1.1.17
rcTengDot3StatsLinkFailures
The total number of link failures enCounter32ed on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.1.1.18
rcTengDot3StatsPacketErrors
The total number of packet errors enCounter32ed on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.1.1.19
rcTengDot3StatsCarrierErrors
The total number of carrier errors enCounter32ed on
this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.1.1.20
rcTengDot3StatsLinkInactiveErrors
The total number of link inactive errors enCounter32ed
on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.1.1.21
rcTengDot3StatsInFlowCtrlPkts
The total number of flow control packets received
by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.22
rcTengDot3StatsOutFlowCtrlPkts
The total number of flow control packets transmitted
by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.23
rcTengDot3StatsFrameTooShorts
The total number of frames that are too short
that were enCounter32ed on this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.24
rcTengDot3StatsInPfcPkts
The total number of Priority Flow Control (PFC)
packets received by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.26
rcTengDot3StatsOutPfcPkts
The total number of Priority Flow Control (PFC)
packets transmitted by this interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.1.1.27

rcTengStatTable

table
.1.3.6.1.4.1.2272.1.50.1.2 · 1 row entry · 20 columns
Open in standard view 
A table used to store port statistics.
rcTengStatEntry entry .1.3.6.1.4.1.2272.1.50.1.2.1
interface Counter32s
Indexes
rcTengStatIndex
Column Syntax OID
rcTengStatIndex
An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.50.1.2.1.1
rcTengStatBridgeInUnicastFrames
The total number of incoming unicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.2
rcTengStatBridgeInMulticastFrames
The total number of incoming multicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.3
rcTengStatBridgeInBroadcastFrames
The total number of incoming broadcast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.4
rcTengStatBridgeInDiscards
The total number of frames that were discarded by
the bridging entity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.5
rcTengStatBridgeOutUnicastFrames
The total number of outgoing unicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.6
rcTengStatBridgeOutMulticastFrames
The total number of outgoing multicast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.7
rcTengStatBridgeOutBroadcastFrames
The total number of outgoing broadcast frames that
were bridged.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.8
rcTengStatRouteInUnicastFrames
The total number of incoming unicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.9
rcTengStatRouteInMulticastFrames
The total number of incoming multicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.10
rcTengStatRouteInDiscards
The total number of frames that were discarded by
the routing entity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.11
rcTengStatRouteOutUnicastFrames
The total number of outgoing unicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.12
rcTengStatRouteOutMulticastFrames
The total number of outgoing multicast frames that
were routed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.13
rcTengStatStgForwardTransitions
The number of times this port has transitioned
from the Learning state to the Forwarding state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.14
rcTengStatStgInConfigBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.15
rcTengStatStgInTcnBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.16
rcTengStatStgInBadBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.17
rcTengStatStgOutConfigBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.18
rcTengStatStgOutTcnBpdus SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.19
rcTengStatBridgeOutFrames
Used by the Accelar 8000 product family to account
for all transmitted bridge unicast, broadcast, and
multicast packets. The individual Counter32s are not
supported.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.2.1.20

rcTengIfTable

table
.1.3.6.1.4.1.2272.1.50.1.3 · 1 row entry · 18 columns
Open in standard view 
A list of interface entries.  The number of entries
is given by the value of engIfNumber.
rcTengIfEntry entry .1.3.6.1.4.1.2272.1.50.1.3.1
An entry containing management information applicable
to a particular interface.
Indexes
rcTengIfIndex
Column Syntax OID
rcTengIfIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.50.1.3.1.1
rcTengIfDescr
A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.50.1.3.1.2
rcTengIfType
The type of interface. Additional values for IfType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddnX25
5rfc877x25
6ethernetCsmacd
7iso88023Csmacd
8iso88024TokenBus
9iso88025TokenRing
10iso88026Man
11starLan
12proteon10Mbit
13proteon80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frameRelay
33rs232
34para
35arcnet
36arcnetPlus
37atm
38miox25
39sonet
40x25ple
41iso88022llc
42localTalk
43smdsDxi
44frameRelayService
45v35
46hssi
47hippi
48modem
49aal5
50sonetPath
51sonetVT
52smdsIcip
53propVirtual
54propMultiplexor
 .1.3.6.1.4.1.2272.1.50.1.3.1.3
rcTengIfMtu
The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.50.1.3.1.4
rcTengIfSpeed
An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.3.1.5
rcTengIfPhysAddress
The interface's address at its protocol sub-layer.
The interface's media-specific MIB must define the bit
and byte ordering and format of the value contained by
this object. For interfaces which do not have such an
add…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.2272.1.50.1.3.1.6
rcTengIfAdminStatus
The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with IfAdminStatus in the down(2)
state. As a resu…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.2272.1.50.1.3.1.7
rcTengIfOperStatus
The current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If IfAdminStatus is down(2) then
IfOperStatus should be down(2). If IfAdminStatus is
changed t…
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
 .1.3.6.1.4.1.2272.1.50.1.3.1.8
rcTengIfLastChange
The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object c…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.3.1.9
rcTengIfInOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.10
rcTengIfInUcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.11
rcTengIfInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a
packet co…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.13
rcTengIfInErrors
For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of in…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.14
rcTengIfInUnknownProtos
For packet-oriented interfaces, the number of packets
received via the interface which were discarded
because of an unknown or unsupported protocol. For
character-oriented or fixed-length interfaces which
support proto…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.15
rcTengIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.16
rcTengIfOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.17
rcTengIfOutDiscards
The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding such a packet could be to free
up buffer s…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.19
rcTengIfOutErrors
For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units
that could no…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.3.1.20

rcTengIfXTable

table
.1.3.6.1.4.1.2272.1.50.1.4 · 1 row entry · 18 columns
Open in standard view 
A list of interface entries.  The number of entries
is given by the value of ifNumber.  This table
contains additional objects for the interface table.
rcTengIfXEntry entry .1.3.6.1.4.1.2272.1.50.1.4.1
An entry containing additional management information
applicable to a particular interface.
Indexes
rcTengIfXIndex
Column Syntax OID
rcTengIfXIndex
A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.50.1.4.1.1
rcTengIfName
The textual name of the interface. The value of this
object should be the name of the interface as assigned
by the local device and should be suitable for use in
commands entered at the device's `console'. This
might …
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.50.1.4.1.2
rcTengIfInMulticastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes both Group and Functional
addresses.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.3
rcTengIfInBroadcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.4
rcTengIfOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent. For
a MAC layer prot…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.5
rcTengIfOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.6
rcTengIfHCInOctets
The total number of octets received on the interface,
including framing characters. This object is a 64-bit
version of rcTengIfInOctets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.7
rcTengIfHCInUcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
This object is a 64-bit version of rcTengIfInUcastPkts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.8
rcTengIfHCInMulticastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes both Group and Functional
addresses. T…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.9
rcTengIfHCInBroadcastPkts
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer. This object is a
64-bit version of IfInBroadcastPkts.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.10
rcTengIfHCOutOctets
The total number of octets transmitted out of the
interface, including framing characters. This object
is a 64-bit version of rcTengIfOutOctets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.11
rcTengIfHCOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including those that were discarded or not
sent. Thi…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.12
rcTengIfHCOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent. For
a MAC layer prot…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.13
rcTengIfHCOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent. This
object is a 64-…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.50.1.4.1.14
rcTengIfLinkUpDownTrapEnable
Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.50.1.4.1.15
rcTengIfHighSpeed
An estimate of the interface's current bandwidth in
units of 1,000,000 bits per second. If this object
reports a value of `n' then the speed of the interface
is somewhere in the range of `n-500,000' to
`n+499,999'. Fo…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.50.1.4.1.16
rcTengIfPromiscuousMode
This object has a value of false(2) If this interface
only accepts packets/frames that are addressed to this
station. This object has a value of true(1) when the
station accepts all packets/frames transmitted on the
me…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.50.1.4.1.17
rcTengIfConnectorPresent
This object has the value 'true(1)' if the interface
sublayer has a physical connector and the value
'false(2)' otherwise.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.50.1.4.1.18

rcRecReservTable

table
.1.3.6.1.4.1.2272.1.51.1 · 1 row entry · 5 columns
Open in standard view 
This table would display the statistics of several HW
record type used.  This will also let the user reserve
certain number of records for each type.
rcRecReservTablEntry entry .1.3.6.1.4.1.2272.1.51.1.1
Indexes
rcRecReservRecordType
Column Syntax OID
rcRecReservRecordType
.
Enumeration
Enumerated Values:
1filter
2ipmc
3local
4mac
5static
6vrrp
 .1.3.6.1.4.1.2272.1.51.1.1.1
rcRecReservUsed
Displayes the number of HW records actually usee
by the recordType.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.51.1.1.2
rcRecReservReserved
Displayes the number of HW records reserved for
the recordType.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.51.1.1.3
rcRecReservNewReserved
Displayes the number of HW records that w ill
be reserved for this recordType after reset if the
configuration is saved.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.51.1.1.4
rcRecReservDefReserved
Number of records reserved for this recordType
if loaded with factory default.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.51.1.1.5

rcGlobalMacFilterTable

table
.1.3.6.1.4.1.2272.1.60.1 · 1 row entry · 2 columns
Open in standard view 
A list of Global Mac filter entries.
rcGlobalMacFilterEntry entry .1.3.6.1.4.1.2272.1.60.1.1
this entry is used for global mac filtering.Any Mac
address configured here will be discarded globally
by the switch.
Indexes
rcGlobalMacFilterAddress
Column Syntax OID
rcGlobalMacFilterAddress
A MAC address which will be discarded globally by
the switch
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.60.1.1.1
rcGlobalMacFilterRowStatus
Used to create/delete entries in rcGlobalMacFilterTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.60.1.1.2

rcIpv6InterfaceTable

table
.1.3.6.1.4.1.2272.1.62.1.1.2 · 1 row entry · 26 columns
Open in standard view 
This table contains list of IPv6 interfaces and
per-interface IPv6-specific information.
rcIpv6InterfaceEntry entry .1.3.6.1.4.1.2272.1.62.1.1.2.1
An entry of ipv6 interface In Table containing
per-interface information.
Indexes
rcIpv6InterfaceIfIndex
Column Syntax OID
rcIpv6InterfaceIfIndex
An unique value to identify a physical interface
or a logical interface (VLAN).
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.1
rcIpv6InterfaceIdentifier
IPv6 address
interface identifiers. This is a binary string
of up to 8 octets in network byte-order.
IPV6-TCIpv6AddressIfIdentifierr/w
Textual Convention: IPV6-TCIpv6AddressIfIdentifier OctetString
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.2
rcIpv6InterfaceIdentifierLength
The length of the Interface Identifier in bits.
bitsInteger32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.3
rcIpv6InterfaceDescr
A textual string containing information about the
interface. This string may be set by network management system.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.4
rcIpv6InterfaceVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
RcVlanIdOrNoner/w
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.5
rcIpv6InterfaceType
The interface type.
Enumeration
Enumerated Values:
1ethernet
2pointToPoint
3pointToMultipoint
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.6
rcIpv6InterfaceReasmMaxSize
MTU for this IPv6 interface, this value should
be same for all the ip addresses defined on
this interface.
In VSP9000, Supported range for IO interface,
supported range is(1280..1500 | 1850 | 9500).
For Mgmt interface…
Integer32r/w
Constraints:
range: 1280-1500
range: 1850-1850
range: 9500-9500
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.7
rcIpv6InterfacePhysAddress
The media-dependent `physical' address, for the
ethernet media it is the MAC address
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.8
rcIpv6InterfaceAdminStatus
The indication of whether IPv6 is enabled (up)
or disabled (down) on this interface. This object does not
affect the state of the interface itself, only its
connection to an IPv6 stack.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.9
rcIpv6InterfaceOperStatus
Operating status of the interface.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.10
rcIpv6InterfaceReachableTime
The time (in milliseconds) a neighbor is considered
reachable after receiving a reachability confirmation.
REFERENCE RFC2461, Section 6.3.2
Integer32r/w
Constraints:
range: 1-3600000
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.11
rcIpv6InterfaceRetransmitTime deprecated
Deprecated. Use rcIpv6InterfaceRetransmitTimer instead.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.12
rcIpv6InterfaceMulticastAdminStatus
This indicates the admin status for multicast
for this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.13
rcIpv6InterfaceRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.14
rcIpv6InterfaceDhcpEnabled
Enable or disable DHCP on the specified
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.15
rcIpv6InterfaceMacOffset
Used to request a particular MAC for an IPv6 VLAN.
The system has 1536 mac addresses, last 4 are
reserved for MG.
One can either mention a mac offset while
configuring IPv6 on a vlan or it can be alloted
by the system w…
Integer32r/w
Constraints:
range: 0-1535
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.16
rcIpv6InterfaceRetransmitTimer
The time (in milliseconds) between retransmissions of
Neighbor Solicitation messages to a neighbor when
resolving the address or when probing the reachability
of a neighbor. REFERENCE RFC2461, Section 6.3.2
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.17
rcIpv6InterfaceCurHopLimit
The default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.

The default should be set …
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.18
rcIpv6InterfaceClearIcmpStats
Clear ICMP statistics for an interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.20
rcIpv6InterfaceClearGeneralStats
Clear general statistics for an interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.21
rcIpv6InterfaceClearNeighborCache
Clear Neighbor Cache for an interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.22
rcIpv6InterfaceClearDestinationCache
Clear Destination Cache for an interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.23
rcIpv6InterfaceReversePathCheckEnable
Used to indicate whether this interface should
perform Reverse Path Check
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.24
rcIpv6InterfaceReversePathCheckMode
Reverse Path Checking mode.
Enumerationr/w
Enumerated Values:
1existonly
2strict
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.25
rcIpv6InterfaceForwardingEnabled
Used to indicate whether this interface should
perform forwarding
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.26
rcIpv6InterfaceRsmltEnable
Used to indicate whether this interface has
rsmlt enabled or not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.2.1.27

rcIpv6AddressTable

table
.1.3.6.1.4.1.2272.1.62.1.1.3 · 1 row entry · 10 columns
Open in standard view 
This table contains addressing information relevant
to the entity's interfaces.
          
This table does not contain multicast address 
information. Tables for such information should be 
contained in multicast specific MIBs such as RFC3019.
          
While this table is writable the user will note that several
objects, such as rcIpv6AddressOrigin, are not. The 
intention in allowing a user to write to this table is to 
allow them to add or remove any entry that isn't permanent.
The user should be  allowed to modify objects and entries 
when that would not cause inconsistencies within the table.
Allowing write access to objects such as rcIpv6AddressOrigin
could allow a user to insert an entry and then label it 
incorrectly.
rcIpv6AddressEntry entry .1.3.6.1.4.1.2272.1.62.1.1.3.1
An address mapping for a particular interface. Note that
when an address is added to an interface the resulted
prefix is added to that interface.
Indexes
rcIpv6AddressIfIndex rcIpv6AddressAddr
Column Syntax OID
rcIpv6AddressIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfInd…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.1
rcIpv6AddressAddr
The IPv6 address to which this entry's addressing
information pertains. This is one of the ipv6 addresses that
this interface(identified by the rcIpv6AddressIfIndex) has.

Implementors need to be aware t…
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.2
rcIpv6AddressType
The type of address. It is either unicast or anycast
IPv6 addresses (RFC3513).
Enumerationr/w
Enumerated Values:
1unicast
2anycast
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.3
rcIpv6AddressPrefixLength
Prefix Length value for this address. Cannot be changed
after the creation. This field MUST be provided in order
to create an entry in this table.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.4
rcIpv6AddressPrefix
A pointer to the row in the prefix table to which this
address belongs. May be { 0 0 } if there is no such row.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.5
rcIpv6AddressOrigin
The origin of the address. The origin of the address, one
of: other(1),manual(2), dhcp(4),linklayer(5), random(6)
IpAddressOriginTC
Textual Convention: IpAddressOriginTC Enumeration
Type Values:
1other
2manual
4dhcp
5linklayer
6random
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.6
rcIpv6AddressStatus
The status of the address, describing if the address can be
used for communication. It will One of: preferred(1),
deprecated(2),invalid(3),inaccessible(4),unknown(5),
tentative(6), duplicate(7)
IpAddressStatusTC
Textual Convention: IpAddressStatusTC Enumeration
Type Values:
1preferred
2deprecated
3invalid
4inaccessible
5unknown
6tentative
7duplicate
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.7
rcIpv6AddressCreated
The value of sysUpTime at the time this entry was
created. If this entry was created prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.8
rcIpv6AddressLastChanged
The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.9
rcIpv6AddressRowStatus
The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether ot…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.3.1.10

rcIpv6PrefixTable

table
.1.3.6.1.4.1.2272.1.62.1.1.4 · 1 row entry · 15 columns
Open in standard view 
This table allows the user to 
determine the source of an IP address or set of 
IP addresses and allows other tables to
share the information via pointer rather than by copying.
          
For example when the node configures both a unicast and
anycast address for a prefix the ipAddressPrefix objects for
those addresses will point to a single row in this table.
          
          
This table primarily provides support for IPv6 prefixes and
several of the objects are less meaningful for IPv4.  The
table continues to allow IPv4 addresses to allow future
flexibility.  In order to promote a common configuration
this document includes suggestions for default values for
IPv4 prefixes.  Each of these values may be overridden if an
object is meaningful to the node.
          
          
All prefixes used by this entity should be included in this
table independent of how the entity learned the prefix.
(This table isn't limited to prefixes learned from router
advertisements.)
rcIpv6PrefixEntry entry .1.3.6.1.4.1.2272.1.62.1.1.4.1
An entry of ipv6 prefix In the Table.
Indexes
rcIpv6PrefixIfIndex rcIpv6PrefixAddr rcIpv6PrefixLength
Column Syntax OID
rcIpv6PrefixIfIndex
An unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.1
rcIpv6PrefixAddr
Prefix to create an ipv6 address in ipv6 interface
table.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.2
rcIpv6PrefixLength
Mask to create an ipv6 prefix entry
either will be advertised or suppressed
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.3
rcIpv6PrefixVlanId
A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.4
rcIpv6PrefixUseDefaultVal
Select one of the value to set/use it's value
to default value. This is a bitmask field,
setting all the bits means that all the options
will be reverted to default values.
Enumerationr/w
Enumerated Values:
1none
2valid-life
3preferred-life
4infinite
5no-advertise
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.5
rcIpv6PrefixAtValidLife
Is the date and time, upon reaching this
value the prefix will be expired,
if configured this option will
be included in the neighbor advertisement
for this prefix.
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.8
rcIpv6PrefixAtPreferredLife
Is the date and time, upon reaching this
value the prefix will be expired,
if configured this option will be
included in the neighbor advertisement
for this prefix.
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.9
rcIpv6PrefixInfinite
if set the prefix's valid lifetime will
not exprie.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.10
rcIpv6PrefixOnLinkFlag
if set then this prefix can be used
for onlink determination. This value
be placed in the L-bit field in the prefix
information option. It is a 1 bit flag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.11
rcIpv6PrefixAutoFlag
if set then this prefix can be used
for autonomous address config. This value
be placed in the auto-flag field in the prefix
information option. It is a 1 bit flag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.12
rcIpv6PrefixAddressEui
Use an EUI-64 interface ID in the low-order
64bits of the address when not specified in the address field.
If enabled use EUI, otherwise use EUI-64 and complement U/L
(Universal/Local bit). This operation should
be allo…
Enumerationr/w
Enumerated Values:
1eui-not-used
2eui-used-with-ul-complement
3eui-used-without-ul-complement
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.13
rcIpv6PrefixNoAdvertise
if set then this prefix can not be included
in the neighbor advertisement.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.14
rcIpv6PrefixRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.15
rcIpv6PrefixValidLifetime
Valid lifetime in seconds, indicates
how long this prefix advertised in
the nbr advertisement is valid.
Value of 4294967295 represents infinity.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.16
rcIpv6PrefixPreferredLifetime
Preferred lifetime in seconds, indicates
how long this prefix advertised in
advertisemt for this prefix.
Value of 4294967295 represents infinity.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.4.1.17

rcIpv6RouterAdvertTable

table
.1.3.6.1.4.1.2272.1.62.1.1.5 · 1 row entry · 14 columns
Open in standard view 
The table containing information 
used to construct router advertisements.
rcIpv6RouterAdvertEntry entry .1.3.6.1.4.1.2272.1.62.1.1.5.1
An entry containing information used to construct
router advertisements.
Indexes
rcIpv6RouterAdvertIfIndex
Column Syntax OID
rcIpv6RouterAdvertIfIndex
An unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.1
rcIpv6RouterAdvertSendAdverts
A flag indicating whether or not the router sends periodic
router advertisements and responds to router solicitations
on this interface. REFERENCE RFC2461 Section 6.2.1
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.2
rcIpv6RouterAdvertUseDefaultVal
Select one of the value to set/use it's
value to default value, or set all the bits
to indicate all the options will be set to
their default value.
Enumerationr/w
Enumerated Values:
1none
2send-advertisement
3max-interval
4min-interval
5default-life-time
6hop-limit
7managed-flag
8other-config-flag
9dad-ns-num
10linkMtu
11reachableTime
12retransmitTime
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.3
rcIpv6RouterAdvertMaxInterval
Configure the max interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 4 seconds and
no greater than 1800.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.4
rcIpv6RouterAdvertMinInterval
Configure the min interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 3 seconds and
no greater than .75* max-interval.
Integer32r/w
Constraints:
range: 3-1350
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.5
rcIpv6RouterAdvertReachableTime
The value (in milliseconds) to be placed in the router advertisement message
sent by the router. The value zero means
unspecified (by this router). Used to
configure the amount of time th…
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.6
rcIpv6RouterAdvertRetransmitTimer deprecated
The value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero means
unspecified (by this router). Used t…
Integer32
Constraints:
range: 0-36000000
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.7
rcIpv6RouterAdvertDefaultLifeTime
The value to be placed in the router lifetime field of
router advertisements sent from this interface. This value
MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and
9000 seconds.

…
Integer32r/w
Constraints:
range: 0-0
range: 4-9000
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.8
rcIpv6RouterAdvertCurHopLimit
The default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.

A value of zero in the rou…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.9
rcIpv6RouterAdvertManagedFlag
if true then the M-bit(Managed address
configureation) in the router
adverisement will be set.
REFERENCE RFC2461 Section 6.2.1
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.10
rcIpv6RouterAdvertOtherConfigFlag
if true then the O-bit (Other stateful
Configuration) in the router
adverisement will be set. REFERENCE
RFC2461 Section 6.2.1
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.11
rcIpv6RouterAdvertDadNsNum
The number of neighbor solicitation
messages for DAD (Duplicate address
detection). A value 0 is used to disable
DAD process on this interface. A value 1
is used to send one advertisment without
any retransmissions.
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.12
rcIpv6RouterAdvertLinkMTU
The value to be placed in MTU options sent by the
router on this interface. A value of zero
indicates that no MTU options are sent. REFERENCE
RFC2461 Section 6.2.1
Unsigned32r/w
Constraints:
range: 0-0
range: 1280-1500
range: 1850-1850
range: 9500-9500
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.13
rcIpv6RouterAdvertRetransmitTime
The value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero means
unspecified (by this router). Used t…
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.5.1.14

rcIpv6StaticRouteTable

table
.1.3.6.1.4.1.2272.1.62.1.1.6 · 1 row entry · 9 columns
Open in standard view 
This table contains list of routes that are
created by the user to destination networks.
rcIpv6StaticRouteEntry entry .1.3.6.1.4.1.2272.1.62.1.1.6.1
An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…
Indexes
rcIpv6StaticRouteDest rcIpv6StaticRoutePrefixLength rcIpv6StaticRouteNextHop rcIpv6StaticRouteIfIndex
Column Syntax OID
rcIpv6StaticRouteDest
The destination IPv6 address of this route.
The values for the index objects rcIpv6StaticRouteDest and
rcIpv6StaticRoutePrefixLength must be consistent. When
the value of rcIpv6StaticRouteDest (excluding the zone
inde…
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.1
rcIpv6StaticRoutePrefixLength
Indicates the number of leading one bits which
form the mask to be logical-ANDed with the destination
address before being compared to the value in the
rcIpv6StaticRouteDestAddr field.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.2
rcIpv6StaticRouteNextHop
Next hop IPv6 address for this destination.
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.3
rcIpv6StaticRouteIfIndex
The ifIndex value which identifies the local
interface through which the next hop of this route
should be reached. A value of 0 is valid and
represents the scenario where no interface is specified.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.4
rcIpv6StaticRouteDistance
cost/distance to reach the destination for this
node.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.5
rcIpv6StaticRouteStatus
(1)notReachable means the route is not reachable and no
neighbor request entry is built to resolved the next-hop.
It happens when there is no route or neighbor to reach
the static route's next-hop.
(2)tryToResolve m…
Enumeration
Enumerated Values:
1notReachable
2tryToResolve
3reachableNotInRtm
4reachableInRtm
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.6
rcIpv6StaticRoutePreference
Used to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The …
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.7
rcIpv6StaticRouteEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.8
rcIpv6StaticRouteRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.6.1.9

rcIpv6NetToPhysicalTable

table
.1.3.6.1.4.1.2272.1.62.1.1.7 · 1 row entry · 8 columns
Open in standard view 
The IP Address Translation table used for mapping from IP
addresses to physical addresses.
          
The Address Translation tables contain the IP address to
'physical' address equivalences.  Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
          
While many protocols may be used to populate this table, ARP
[10] and Neighbor Discovery [4] are the most likely
options.
rcIpv6NetToPhysicalEntry entry .1.3.6.1.4.1.2272.1.62.1.1.7.1
Each entry contains one IP address to `physical' address
equivalence.
Indexes
rcIpv6NetToPhysicalIfIndex rcIpv6NetToPhysicalNetAddress
Column Syntax OID
rcIpv6NetToPhysicalIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IfInd…
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.1
rcIpv6NetToPhysicalNetAddress
The IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.


Implementors need to be aware that i…
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.2
rcIpv6NetToPhysicalPhysAddress
The media-dependent `physical' address.

As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change to non-volatile storage. In the ethernet…
OctetStringr/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.3
rcIpv6NetToPhysicalInterface
The field represents either a physical port id or the MLT
port id. This entry is associated either with
a port or with a MLT in a VLAN/Brouter port. If the value is
0 then the interface is CP port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.4
rcIpv6NetToPhysicalLastUpdated
The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.5
rcIpv6NetToPhysicalType
The type of mapping.

The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol.
…
Enumerationr/w
Enumerated Values:
1other
2dynamic
3static
4local
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.6
rcIpv6NetToPhysicalState
The Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4), this object is always unknown(6).
REFE…
Enumeration
Enumerated Values:
1reachable
2stale
3delay
4probe
5invalid
6unknown
7incomplete
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.8
rcIpv6NetToPhysicalRowStatus
The status of this conceptual row.

The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effec…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.7.1.9

rcIpv6PrefixListTable

table
.1.3.6.1.4.1.2272.1.62.1.1.8 · 1 row entry · 7 columns
Open in standard view 
IPv6 Prefix List table
rcIpv6PrefixListEntry entry .1.3.6.1.4.1.2272.1.62.1.1.8.1
An entry of Ipv6 Prefix List Table.
Indexes
rcIpv6PrefixListId rcIpv6PrefixListPrefix rcIpv6PrefixListPrefixMaskLen
Column Syntax OID
rcIpv6PrefixListId
Id of an IPv6 Prefix List
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.1
rcIpv6PrefixListPrefix
Is a member of a specific ipv6 prefix list.
Adding the prefix to the given ipv6 prefix list
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.2
rcIpv6PrefixListPrefixMaskLen
Mask length of the ipv6 prefix added to the prefix list
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.3
rcIpv6PrefixListMaskLenFrom
Lower bound of mask length of the ipv6 prefix added to
the prefix list
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.4
rcIpv6PrefixListMaskLenUpto
Higher bound of mask length of the ipv6 prefix added to
the prefix list
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.5
rcIpv6PrefixListName
Name of the Ipv6 prefix list
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.6
rcIpv6PrefixListRowStatus
Used to create/delete entries in the ipv6 prefix list
table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.8.1.7

rcIpv6ConfDhcpRelayTable

table
.1.3.6.1.4.1.2272.1.62.1.1.9 · 1 row entry · 6 columns
Open in standard view 
DHCP Relay for Ipv6 configuration table
rcIpv6ConfDhcpRelayEntry entry .1.3.6.1.4.1.2272.1.62.1.1.9.1
Used to configure DHCP on a particular L3 interface. An
entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.

Once created this entry will only be deleted if the
rcIpv…
Indexes
rcIpv6ConfDhcpIfIndex
Column Syntax OID
rcIpv6ConfDhcpIfIndex
Interface number. The number can represent either
a physical or logical(VLAN) interface.
Integer32
Constraints:
range: 1-6142
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.1
rcIpv6ConfDhcpMaxHop
Used to indicate the maximum number of hops a
DHCP packet can take from the source device to
the destination device (i.e., DHCP client to
DHCP server).
Unsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.2
rcIpv6ConfDhcpRemoteIdEnabled
Used to indicate if remote-id option is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.3
rcIpv6ConfDhcpNumRequests
The total number of DHCP requests seen on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.4
rcIpv6ConfDhcpNumReplies
The total number of DHCP replies seen on this interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.5
rcIpv6ConfDhcpRowStatus
An entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.

Once created this entry will only be deleted if the
rcIpv6ConfDhcpRowStatus is set to 'destroy(6)'. In
which…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.9.1.6

rcIpv6DhcpForwardTable

table
.1.3.6.1.4.1.2272.1.62.1.1.10 · 1 row entry · 4 columns
Open in standard view 
DHCP Relay forwarding table.
rcIpv6DhcpForwardEntry entry .1.3.6.1.4.1.2272.1.62.1.1.10.1
An entry used represents a DHCP Relayed message forwarding directive.
Indexes
rcIpv6DhcpForwardAgentAddr rcIpv6DhcpForwardServerAddr
Column Syntax OID
rcIpv6DhcpForwardAgentAddr
The IP address configured on an interface
(i.e., a locally configured IP address).
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.10.1.1
rcIpv6DhcpForwardServerAddr
The IP address of the DHCP server. If this
IP address corresponds to a local interface address, the DHCP packet is multicast out
the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast…
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.10.1.2
rcIpv6DhcpForwardEnabled
Used to indicate whether the entry should be used.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.10.1.3
rcIpv6DhcpForwardRowStatus
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.10.1.4

rcIpv6MgmtPortStaticRouteTable

table
.1.3.6.1.4.1.2272.1.62.1.1.12 · 1 row entry · 9 columns
Open in standard view 
This table contains list of routes that are
created by the user to destination networks
 on the management port.
rcIpv6MgmtPortStaticRouteEntry entry .1.3.6.1.4.1.2272.1.62.1.1.12.1
An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…
Indexes
rcIpv6MgmtPortStaticRouteIfIndex rcIpv6MgmtPortStaticRouteDest rcIpv6MgmtPortStaticRoutePrefixLength rcIpv6MgmtPortStaticRouteNextHop
Column Syntax OID
rcIpv6MgmtPortStaticRouteIfIndex
The ifIndex value which identifies the local
interface through which the next hop of this route
should be reached. A value of 0 is valid and
represents the scenario where no interface is specified.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.1
rcIpv6MgmtPortStaticRouteDest
The destination IPv6 address of this route.
The values for the index objects rcIpv6StaticRouteDest and
rcIpv6StaticRoutePrefixLength must be consistent. When
the value of rcIpv6StaticRouteDest (excluding the zone
inde…
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.2
rcIpv6MgmtPortStaticRoutePrefixLength
Indicates the number of leading one bits which
form the mask to be logical-ANDed with the destination
address before being compared to the value in the
rcIpv6MgmtPortStaticRouteDestAddr field.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.3
rcIpv6MgmtPortStaticRouteNextHop
Next hop IPv6 address for this destination.
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.4
rcIpv6MgmtPortStaticRouteDistance
cost/distance to reach the destination for this
node.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.5
rcIpv6MgmtPortStaticRouteStatus
(1)notReachable means the route is not reachable and no
neighbor request entry is built to resolved the next-hop.
It happens when there is no route or neighbor to reach
the static route's next-hop.
(2)tryToResolve m…
Enumeration
Enumerated Values:
1notReachable
2tryToResolve
3reachableNotInRtm
4reachableInRtm
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.6
rcIpv6MgmtPortStaticRoutePreference
Used to indicate the route preference of this
entry. If there are more than one route that can
be used to forward IP traffic, the route that has
a highest preference will be used instead of a
lower preference one. The …
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.7
rcIpv6MgmtPortStaticRouteEnable
Used to enable/disable this entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.8
rcIpv6MgmtPortStaticRouteRowStatus
Row status for create/delete.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.62.1.1.12.1.9

rcIpv6DestinationCacheTable

table
.1.3.6.1.4.1.2272.1.62.1.1.13 · 1 row entry · 7 columns
Open in standard view 
Ipv6 Destination Cache table
rcIpv6DestinationCacheEntry entry .1.3.6.1.4.1.2272.1.62.1.1.13.1
Used to display Destination Cache
Indexes
rcIpv6DCacheDestAddr rcIpv6DCacheIfIndex
Column Syntax OID
rcIpv6DCacheDestAddr
IPv6 Destination Address from the
Destination Cache.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.1
rcIpv6DCacheIfIndex
The last 16 bits of this object's value are interpreted as InterfaceIndex
(it can represent either a physical, or a VLAN, or a tunnel interface);
the first 16 bits are ignored when the object's value is interpreted.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.2
rcIpv6DCacheNextHop
Ipv6 Next Hop for a Destination Cache entry.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.3
rcIpv6DCacheIfType
Interface type; it can be a real (i.e. VLAN, brouter, tunnel)
or a virtual circuit (i.e. VRRP, RSMLT).
Enumeration
Enumerated Values:
1real
2virtual
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.4
rcIpv6DCacheIfData
Used to display additional information about virtual
circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId
if it is a VRRP circuit); no information is displayed for
real circuits.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.5
rcIpv6DCachePmtu
Path MTU for the entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.6
rcIpv6DCachePmtuAge
Indicates how much time (in seconds) has passed since the PMTU
was updated the last time.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.62.1.1.13.1.7

rcIsisCircuitTable

table
.1.3.6.1.4.1.2272.1.63.2 · 1 row entry · 10 columns
Open in standard view 
Table of IS-IS Circuit, this is extension
to the isisCircTable defined in ISIS MIB
rcIsisCircuitEntry entry .1.3.6.1.4.1.2272.1.63.2.1
An entry of rcIsisCircuit Table. A Entry in
table exists for each ISIS circuit created
Indexes
rcIsisCircuitIndex
Column Syntax OID
rcIsisCircuitIndex
The identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.2.1.1
rcIsisCircuitType
ISIS circuit type this is an extention to
ISIS circuit table, this was required a
standard MIB circuit type does not support
passive type
Enumerationr/w
Enumerated Values:
1bcast
2ptpt
3passive
 .1.3.6.1.4.1.2272.1.63.2.1.2
rcIsisCircuitAuthType
Authentication type for IIH to be sent/reveived
on the circuit/interface
Enumerationr/w
Enumerated Values:
0none
1simple
2hmac-md5
 .1.3.6.1.4.1.2272.1.63.2.1.3
rcIsisCircuitKeyId
Authentication key id related to IIH key
This can be set only if the auth-type is hmac-md5
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.63.2.1.4
rcIsisCircuitAuthKey
Authentication key to be used to authenticate
IIH sent/reveived on the circuit/interface
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.63.2.1.5
rcIsisCircuitAddr
IP address associated with the interface
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.63.2.1.6
rcIsisCircuitMask
IP mask associated with the interface
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.63.2.1.7
rcIsisCircuitOperState
This variable tells the operating state of circ
Enumeration
Enumerated Values:
0unknown
1up
2down
 .1.3.6.1.4.1.2272.1.63.2.1.8
rcIsisCircuitNumAdj
NUmber of adjacencies
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.2.1.9
rcIsisCircuitNumUpAdj
Number of adjancencies which are UP
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.2.1.10

rcIsisPlsbTable

table
.1.3.6.1.4.1.2272.1.63.4 · 1 row entry · 11 columns
Open in standard view 
Table of PLSB under IS-IS
rcIsisPlsbEntry entry .1.3.6.1.4.1.2272.1.63.4.1
An entry of rcIsisPlsb Table. A Entry in
table exists for each plsb instance created
Indexes
rcIsisPlsbId
Column Syntax OID
rcIsisPlsbId
PLSB instance ID
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.63.4.1.1
rcIsisPlsbRowStatus
The state of the rcIsisPlsbEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.63.4.1.2
rcIsisPlsbNodeNickName
PLSB node's nickname is used to
calculate ISID multicast mac address.
IsisPlsbNodeNickNamer/w
Textual Convention: IsisPlsbNodeNickName OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.2272.1.63.4.1.3
rcIsisPlsbVlans
PLSB ISIS vlans for a PLSB instance.
OctetStringr/w
Constraints:
range: 512-512
 .1.3.6.1.4.1.2272.1.63.4.1.4
rcIsisPlsbLsdbTrap
isis PLSB lsdb update trap enable on this plsb instance
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.63.4.1.5
rcIsisPlsbState
enable/disable PLSB.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.63.4.1.6
rcIsisPlsbIpShortcut
ISIS PLSB IP shortcut enabled
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.63.4.1.7
rcIsisPlsbPrimaryVlan
Primary Vlan Id for this plsb instance.
Integer32r/w
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.4.1.8
rcIsisPlsbSmltSplitBEB
ISIS PLSB SMLT split BEB for this plsb instance.
Enumeration
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.2272.1.63.4.1.9
rcIsisPlsbSmltBmac
ISIS PLSB SMLT virtual MAC for this plsb instance.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.63.4.1.10
rcIsisPlsbSmltPeerSysId
ISIS PLSB SMLT Peer's system-id for this plsb instance.
IsisSystemIDr/w
Textual Convention: IsisSystemID OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.63.4.1.11

rcIsisCircuitPlsbTable

table
.1.3.6.1.4.1.2272.1.63.5 · 1 row entry · 7 columns
Open in standard view 
Table of IS-IS Circuit PLSB instance
rcIsisCircuitPlsbEntry entry .1.3.6.1.4.1.2272.1.63.5.1
An entry of rcIsisCircuitPlsb Table. A Entry in
table exists for each PLSB instance under a ISIS
circuit created
Indexes
rcIsisCircuitPlsbIndex rcIsisCircuitPlsbId
Column Syntax OID
rcIsisCircuitPlsbIndex
The identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.5.1.1
rcIsisCircuitPlsbId
PLSB instance ID
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.63.5.1.2
rcIsisCircuitPlsbRowStatus
The state of the rcIsisCircuitPlsbEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.63.5.1.3
rcIsisCircuitPlsbState
PLSB functionality enable on this Plsb
instance at this port
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.63.5.1.4
rcIsisCircuitPlsbType
ISIS circuit type this is an extention to
ISIS circuit table, this was required a
standard MIB circuit type does not support
passive type
Enumerationr/w
Enumerated Values:
1bcast
2ptpt
 .1.3.6.1.4.1.2272.1.63.5.1.5
rcIsisCircuitPlsbL1Metric
The metric value of this circuit for this level.
IsisDefaultL1Metricr/w
Textual Convention: IsisDefaultL1Metric Integer32
Type Constraints:
range: 1..63
 .1.3.6.1.4.1.2272.1.63.5.1.6
rcIsisCircuitPlsbWideL1Metric
The metric value of this circuit for this level.
IsisWideL1Metricr/w
Textual Convention: IsisWideL1Metric Integer32
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.2272.1.63.5.1.7

rcIsisAdjTable

table
.1.3.6.1.4.1.2272.1.63.10 · 1 row entry · 4 columns
Open in standard view 
Table of IS-IS Adjacency, this is extension
to the isisISAdjTable defined in ISIS MIB
rcIsisAdjEntry entry .1.3.6.1.4.1.2272.1.63.10.1
An entry of rcIsisAdj Table. A Entry in
table exists for each ISIS adjacency
Indexes
rcIsisAdjCircIndex rcIsisAdjIndex
Column Syntax OID
rcIsisAdjCircIndex
The identifier of this circuit, unique within the
Intermediate System. This object follows
the index behavior. This is for SNMP Indexing
purposes only and need not have any relation to
any protocol value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.10.1.1
rcIsisAdjIndex
A unique value identifying the IS adjacency from all
other such adjacencies on this circuit. This value is
automatically assigned by the system when the adjacency
is created.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.63.10.1.2
rcIsisAdjHostName
The hostname listed in LSP, or the system name if host
name is not configured.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.63.10.1.3
rcIsisAdjIfIndex
The value of ifIndex for the interface to which this
circuit corresponds.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.63.10.1.4

rcIsisLSPTable

table
.1.3.6.1.4.1.2272.1.63.11 · 1 row entry · 6 columns
Open in standard view 
Table of IS-IS LSP, this is extension
to the isisLSPSummaryTable defined in ISIS MIB
rcIsisLSPEntry entry .1.3.6.1.4.1.2272.1.63.11.1
An entry of rcIsisLSP Table. A Entry in
table exists for each ISIS LSP
Indexes
rcIsisLSPLevel rcIsisLSPID
Column Syntax OID
rcIsisLSPLevel
At which level does this LSP appear?
Enumeration
Enumerated Values:
1area
2domain
 .1.3.6.1.4.1.2272.1.63.11.1.1
rcIsisLSPID
The 8 byte LSP ID, consisting of the SystemID,
Circuit ID, and Fragment Number.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2272.1.63.11.1.2
rcIsisLSPSeq
The sequence number for this LSP.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.63.11.1.3
rcIsisLSPHostName
The hostname listed in LSP, or the system name if host
name is not configured.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.63.11.1.4
rcIsisLSPNickName
PLSB node's nickname
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2272.1.63.11.1.5
rcIsisLSPLifetimeRemain
The remaining lifetime in seconds for this LSP.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.63.11.1.6

rcIsisPlsbIpUnicastFibTable

table
.1.3.6.1.4.1.2272.1.63.12 · 1 row entry · 11 columns
Open in standard view 
Table of IS-IS PLSB IP Unicast FIB
rcIsisPlsbIpUnicastFibEntry entry .1.3.6.1.4.1.2272.1.63.12.1
An entry of rcIsisPlsbIpUnicastFib Table. A Entry in
table exists for each PLSB IP unicast forwarding entry.
Indexes
rcIsisPlsbIpUnicastFibVrfId rcIsisPlsbIpUnicastFibDestinationIpAddrType rcIsisPlsbIpUnicastFibDestinationIpAddr rcIsisPlsbIpUnicastFibDestinationMask rcIsisPlsbIpUnicastFibNextHopBmac rcIsisPlsbIpUnicastFibVlan
Column Syntax OID
rcIsisPlsbIpUnicastFibVrfId
VRF ID of the IP unicast FIB entry, 0 indicates NRE.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.12.1.1
rcIsisPlsbIpUnicastFibDestinationIpAddrType
The address type of destination IP Address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.63.12.1.2
rcIsisPlsbIpUnicastFibDestinationIpAddr
Destination IP Address of the IP unicast FIB entry.
Support ipv4 size(4) and ipv6 size(16)
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.2272.1.63.12.1.3
rcIsisPlsbIpUnicastFibDestinationMask
Destination IP mask of the IP unicast FIB entry
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.63.12.1.4
rcIsisPlsbIpUnicastFibNextHopBmac
the nexthop BMAC of the IP unicast FIB entry
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.63.12.1.5
rcIsisPlsbIpUnicastFibVlan
Vlan of the IP unicast FIB entry
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.12.1.6
rcIsisPlsbIpUnicastFibIsid
ISID of the IP unicast FIB entry
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.12.1.7
rcIsisPlsbIpUnicastFibNextHopName
the nexthop hostname of the IP unicast FIB entry
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.63.12.1.8
rcIsisPlsbIpUnicastFibOutgoingPort
Outgoing port of the IP unicast Fib entry.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.63.12.1.9
rcIsisPlsbIpUnicastFibPrefixCost
prefix cost of the IP unicast FIB entry
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.63.12.1.10
rcIsisPlsbIpUnicastFibSpbmCost
bmac cost of the IP unicast FIB entry
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.63.12.1.11

rcIsisPlsbUcastFibTable

table
.1.3.6.1.4.1.2272.1.63.13 · 1 row entry · 6 columns
Open in standard view 
Table of IS-IS PLSB Unicast FIB
rcIsisPlsbUcastFibEntry entry .1.3.6.1.4.1.2272.1.63.13.1
An entry of rcIsisPlsbUcastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation
Indexes
rcIsisPlsbUcastFibSysId rcIsisPlsbUcastFibVlan rcIsisPlsbUcastFibDestinationMacAddr
Column Syntax OID
rcIsisPlsbUcastFibSysId
System ID of the node where unicast FIB entry
come from
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.63.13.1.1
rcIsisPlsbUcastFibVlan
Vlan of the unicast FIB entry
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.13.1.2
rcIsisPlsbUcastFibDestinationMacAddr
Destination Mac Address of the unicast FIB entry
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.63.13.1.3
rcIsisPlsbUcastFibOutgoingPort
Outgoing port of the unicast Fib entry.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.63.13.1.4
rcIsisPlsbUcastFibHostName
Host name of the node where unicast FIB entry
come from
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.63.13.1.5
rcIsisPlsbUcastFibCost
unicast FIB cost
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.63.13.1.6

rcIsisPlsbMcastFibTable

table
.1.3.6.1.4.1.2272.1.63.14 · 1 row entry · 8 columns
Open in standard view 
Table of IS-IS PLSB Multicast FIB
rcIsisPlsbMcastFibEntry entry .1.3.6.1.4.1.2272.1.63.14.1
An entry of rcIsisPlsbMcastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation
Indexes
rcIsisPlsbMcastFibSysId rcIsisPlsbMcastFibVlan rcIsisPlsbMcastFibMcastDestMacAddr
Column Syntax OID
rcIsisPlsbMcastFibSysId
System ID of the node where multicast FIB entry
come from
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.63.14.1.1
rcIsisPlsbMcastFibVlan
Vlan of the multicast FIB entry
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.14.1.2
rcIsisPlsbMcastFibMcastDestMacAddr
Multicast destination Mac Address of the
multicast FIB entry
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.63.14.1.3
rcIsisPlsbMcastFibIsid
Isid id of the multicast FIB entry
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2272.1.63.14.1.4
rcIsisPlsbMcastFibNickName
nick name of node where this i-sid got
configured or discovered
Integer32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2272.1.63.14.1.5
rcIsisPlsbMcastFibType
PLSB i-sid type
Enumeration
Enumerated Values:
1config
2discover
 .1.3.6.1.4.1.2272.1.63.14.1.6
rcIsisPlsbMcastFibOutgoingPorts
Nni port of the multicast Fib entry.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.63.14.1.7
rcIsisPlsbMcastFibHostName
Host name of the node where multicast FIB entry
come from
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.63.14.1.8

rcIsisPlsbNodeTable

table
.1.3.6.1.4.1.2272.1.63.15 · 1 row entry · 5 columns
Open in standard view 
Table of IS-IS PLSB Node
rcIsisPlsbNodeEntry entry .1.3.6.1.4.1.2272.1.63.15.1
An entry of rcIsisPlsbNode Table. A Entry in
table exists for each node running PLSB ISIS
in the setup.
Indexes
rcIsisPlsbNodeSysId
Column Syntax OID
rcIsisPlsbNodeSysId
System ID of the PLSB node entry
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.63.15.1.1
rcIsisPlsbNodePrimaryParentSysId
System ID of parent node of the PLSB node entry for
primary bvlan
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.63.15.1.2
rcIsisPlsbNodePrimaryBvlan
spbm primary b-vlan
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.15.1.3
rcIsisPlsbNodeSecondaryParentSysId
System ID of parent node of the PLSB node entry for
secondary bvlan
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.63.15.1.4
rcIsisPlsbNodeSecondaryBvlan
spbm secondary b-vlan
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.63.15.1.5

rcSlppVlanTable

table
.1.3.6.1.4.1.2272.1.64.1.1.2 · 1 row entry · 3 columns
Open in standard view 
Table of VLANs for which simple loop detection occur on.
rcSlppVlanEntry entry .1.3.6.1.4.1.2272.1.64.1.1.2.1
SLPP VLAN entry.
Indexes
rcSlppVlanVlanId
Column Syntax OID
rcSlppVlanVlanId
Vlan id for which simple loop detection occurs on.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.1
rcSlppVlanSlppEnable
Flag to indicate whether the VLAN entry is active or not for SLPP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.2
rcSlppVlanRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.64.1.1.2.1.3

rcSlppPortTable

table
.1.3.6.1.4.1.2272.1.64.1.1.3 · 1 row entry · 9 columns
Open in standard view 
Table of ports for which simple loop detection occurs on.
rcSlppPortEntry entry .1.3.6.1.4.1.2272.1.64.1.1.3.1
SLPP Port entry.
Indexes
rcSlppPortIfIndex
Column Syntax OID
rcSlppPortIfIndex
Port on which simple loop detection occurs on.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.1
rcSlppPortPktRxThreshold
Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown.
Integer32r/w
Constraints:
range: 1-500
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.2
rcSlppPortSlppEnable
Flag to indicate whether the port entry is active or not for SLPP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.3
rcSlppPortIncomingVlanId
Vlan id of the classified packet on the port brought down by SLPP.
RcVlanIdOrNone
Textual Convention: RcVlanIdOrNone Integer32
Type Constraints:
range: 1..4084
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.5
rcSlppPortSrcNodeType
The src node type of the received slpp Pkt.
Enumeration
Enumerated Values:
0none
1local
2peer
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.6
rcSlppPortPktRxCount
Total number of SLPP packets received on the port.
Integer32
Constraints:
range: 1-500
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.7
rcSlppPortTimeToClrPktRxCount
Time to clear the SLPP Rx PDU counter. This has a default
value of 21600 seconds. Once SLPP is enabled and port
starts receiving SLPP PDUs, a timer is started and once
the timer exceeds this configured value, rcSlppPort…
secondsUnsigned32r/w
Constraints:
range: 1-21600
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.12
rcSlppPortRemainingTimeToClrPktRxCount
Remaining time to clear the SLPP Rx PDU counter. It is
calculated using rcSlppPortTimeToClrPktRxCount and has
a granularity of 5 seconds.
secondsUnsigned32
Constraints:
range: 1-21600
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.13
rcSlppPortClearPktRxCount
Clear the SLPP Rx PDU counter.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.64.1.1.3.1.14

rcTacacsServerTable

table
.1.3.6.1.4.1.2272.1.65.2 · 1 row entry · 12 columns
Open in standard view 
The (conceptual) table listing the TACACS+ servers with
which the client shares a secret.
rcTacacsServerEntry entry .1.3.6.1.4.1.2272.1.65.2.1
An entry (conceptual row) representing a TACACS+ server
with which the client shares a secret.
Indexes
rcTacacsServerAddressType rcTacacsServerAddress
Column Syntax OID
rcTacacsServerAddressType
Specifies the type of IP address used on the Tacacs+ server.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.65.2.1.1
rcTacacsServerAddress
The IP address of the TACACS+ server referred to in this table entry.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.65.2.1.2
rcTacacsServerPortNumber
The TCP port on which the client establishes a connection to the server.
A value of 0 indicates that the system specified default value is used.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.65.2.1.3
rcTacacsServerConnectionType
Specifies TCP connection type between device and TACACS+ server.
Either a single open connection between a device and server
(SingleConnection), or open/close connection per communication
session (PerSessionConnection).
Enumerationr/w
Enumerated Values:
1singleConnection
2perSessionConnection
 .1.3.6.1.4.1.2272.1.65.2.1.4
rcTacacsServerConnectionStatus
Specifies status TCP connection type between device and TACACS+
server.
Enumeration
Enumerated Values:
1connected
2notConnected
 .1.3.6.1.4.1.2272.1.65.2.1.5
rcTacacsServerTimeout
The maximum time (in seconds) to wait for this TACACS+ server to reply.
Integer32r/w
Constraints:
range: 10-30
 .1.3.6.1.4.1.2272.1.65.2.1.6
rcTacacsServerKey
Secret key to be shared with this TACACS+ server.
If the key length is zero that indicates no encryption is being used.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.65.2.1.7
rcTacacsServerSourceIpInterfaceEnabled
Specifies whether source address specification is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.65.2.1.8
rcTacacsServerSourceIpInterfaceType
Specifies the type of IP address used on the interface that
connects to the Tacacs+ server. If this value is unknown(0),
then a system-wide default value will be used.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.65.2.1.9
rcTacacsServerSourceIpInterface
IP address of the interface to use with this server.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.65.2.1.10
rcTacacsServerPriority
Determines the order in which the TACACS+ servers will be used,
when 1 is the highest priority. If more than one server share
the same priority - they will be used in lexicographic order
(the order of entries in this t…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.65.2.1.11
rcTacacsServerRowStatus
The row status variable, can be set to destroy or createAndGo.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.65.2.1.12

rcIpfixConfSlotTable

table
.1.3.6.1.4.1.2272.1.66.1.2.1 · 1 row entry · 7 columns
Open in standard view 
A table to store the configuration details for IPFIX for each
slot.  This table is indexed by slot number.
rcIpfixConfSlotEntry entry .1.3.6.1.4.1.2272.1.66.1.2.1.1
One Entry holding IPFIX config information on slot basis.
Indexes
rcIpfixConfSlotNum
Column Syntax OID
rcIpfixConfSlotNum
Slot number
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.1
rcIpfixConfSlotAgingIntv
Flow record aging interval (Value in seconds).
secondsInteger32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.2
rcIpfixConfSlotActiveTimeout
Flow record active timeout value (Value in mins).
minutesInteger32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.3
rcIpfixConfSlotExportIntv
Frequency of flow export to collector (Value in sec).
secondsInteger32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.4
rcIpfixConfSlotExportState
State of exporter.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.5
rcIpfixConfSlotTempRefIntvSec
Template refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.
secondsInteger32r/w
Constraints:
range: 60-3600
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.6
rcIpfixConfSlotTempRefIntvPkts
Template refresh timeout. Template is sent out to the
collector at least every x seconds or every y exported
packets, whichever occurs first.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2272.1.66.1.2.1.1.7

rcIpfixCollectorTable

table
.1.3.6.1.4.1.2272.1.66.1.2.2 · 1 row entry · 10 columns
Open in standard view 
Table to store the configuration details for IPFIX collector
for each slot.  This table is indexed by slot number and ip
address.
rcIpfixCollectorEntry entry .1.3.6.1.4.1.2272.1.66.1.2.2.1
One entry holds IPFIX collector config information based on
slot info and collector ip address.
Indexes
rcIpfixCollectorSlotNum rcIpfixCollectorAddressType rcIpfixCollectorAddress
Column Syntax OID
rcIpfixCollectorSlotNum
Slot number. An index to the CollectorEntry.
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.1
rcIpfixCollectorAddressType
IP address type of the collector. An index to the
CollectorEntry.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.2
rcIpfixCollectorAddress
IP address of the collector. An index to the CollectorEntry.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.3
rcIpfixCollectorProtocol
Protocol for export data from exporter to collector .
Enumerationr/w
Enumerated Values:
1udp
2tcp
3sctp
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.4
rcIpfixCollectorDestPort
Dest port to send the requests.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.5
rcIpfixCollectorExporterIpType
Ip address type of the exporter for collector.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.6
rcIpfixCollectorExporterIp
Ip address of the exporter for collector.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.7
rcIpfixCollectorProtoVer
This specifies the protocol version for ipfix.
Enumerationr/w
Enumerated Values:
1ipfix
2preipfixv9
3preipfixv5
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.8
rcIpfixCollectorState
State of the particular collector. Enable is true by
default.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.9
rcIpfixCollectorRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.66.1.2.2.1.10

rcIpfixConfPortTable

table
.1.3.6.1.4.1.2272.1.66.1.2.3 · 1 row entry · 8 columns
Open in standard view 
A table to store the configuration details for IPFIX for each
port.  This table is indexed by port number.
rcIpfixConfPortEntry entry .1.3.6.1.4.1.2272.1.66.1.2.3.1
Entry holding IPFIX config information per port.
Indexes
rcIpfixConfPortId
Column Syntax OID
rcIpfixConfPortId
An index to the IpfixConfPortEntry, a unique identifier of
the portId
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.1
rcIpfixConfPortSampleRate
Used to configure the sampling rate. Sample one in every N
packets.
Integer32r/w
Constraints:
range: 1-100000
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.2
rcIpfixConfPortHashPolyCoeffs
Command to set hash polynomial coeffs.
Integer32r/w
Constraints:
range: 1025-16777215
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.3
rcIpfixConfPortHashPolySeed
Command to set hash polynomial seed.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.4
rcIpfixConfPortFlush
This is used to delete all records stored in COP, or to
initiate an export of all records and delete data base after
the export is finished.
Enumerationr/w
Enumerated Values:
1none
2flush
3exportAndFlush
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.5
rcIpfixConfPortAllTraffic
This is used to enable/disable ipfix on all trafiic, for the
specified port.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.6
rcIpfixConfPortHashKeyId
hash key id.
Enumerationr/w
Enumerated Values:
1hashKeyOne
2hashKeyTwo
3hashKeyThree
4hashKeyFour
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.7
rcIpfixConfPortDynamicSampRate
Indicates the dynamic sampling rate.
Integer32
Constraints:
range: 1-100000
 .1.3.6.1.4.1.2272.1.66.1.2.3.1.8

rcIpfixHashStatsTable

table
.1.3.6.1.4.1.2272.1.66.1.2.4 · 1 row entry · 5 columns
Open in standard view 
A table of hash Statistics entries to store the statistics
for each slot. This table is indexed by the slot number.
rcIpfixHashStatsEntry entry .1.3.6.1.4.1.2272.1.66.1.2.4.1
Entry containing hash statistics information for a particular
slot.
Indexes
rcIpfixHashStatsSlotNum
Column Syntax OID
rcIpfixHashStatsSlotNum
A unique identifier for the table.
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.66.1.2.4.1.1
rcIpfixHashStatsHashOverflows
Count of hash overflows per slot.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.66.1.2.4.1.2
rcIpfixHashStatsHashDrops
Count of hash drops per slot.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.66.1.2.4.1.3
rcIpfixHashStatsClear
Setting this object will clear hash statistics for a slot.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2272.1.66.1.2.4.1.4
rcIpfixHashStatsClearTime
The value of sysUpTime when the hash statistics were last
cleared.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.66.1.2.4.1.5

rcIpfixExporterStatsTable

table
.1.3.6.1.4.1.2272.1.66.1.2.5 · 1 row entry · 8 columns
Open in standard view 
A table of Exporter Statistics entries to store the statistics
for each slot, each collector.  This table is indexed by the
slot number and collector address.
rcIpfixExporterStatsEntry entry .1.3.6.1.4.1.2272.1.66.1.2.5.1
Entry containing Exporter statistics information for a
particular slot and particular collector.
Indexes
rcIpfixExporterStatsSlotNum rcIpfixExporterStatsCollectorType rcIpfixExporterStatsCollector
Column Syntax OID
rcIpfixExporterStatsSlotNum
Index for the table, slot number.
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.1
rcIpfixExporterStatsCollectorType
Collector IP address type. This is an index for the table.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.2
rcIpfixExporterStatsCollector
Index for the table, collector address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.3
rcIpfixExporterStatsOutPkts
Number of Packets sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.4
rcIpfixExporterStatsOutOctets
Number of Bytes sent.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.5
rcIpfixExporterStatsPktsLoss
Number of Records lost.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.6
rcIpfixExporterStatsClear
Setting this object will clear exporter statistics.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.7
rcIpfixExporterStatsClearTime
The value of sysUpTime when exporter statistics were last
cleared.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.66.1.2.5.1.8

rcOspfv3AreaTable

table
.1.3.6.1.4.1.2272.1.67.1.1.2 · 1 row entry · 15 columns
Open in standard view 
Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.
rcOspfv3AreaEntry entry .1.3.6.1.4.1.2272.1.67.1.1.2.1
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
Indexes
rcOspfv3AreaId
Column Syntax OID
rcOspfv3AreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.1
rcOspfv3ImportAsExtern
Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scope
Enumerationr/w
Enumerated Values:
1importExternal
2importNoExternal
3importNssa
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.2
rcOspfv3AreaSpfRuns
The number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.3
rcOspfv3AreaBdrRtrCount
The total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.4
rcOspfv3AreaAsBdrRtrCount
The total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.5
rcOspfv3AreaScopeLsaCount
The total number of Area-Scope link-state
advertisements in this area's link-state
database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.6
rcOspfv3AreaScopeLsaCksumSum
The 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link sta…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.7
rcOspfv3AreaSummary
The variable rcOspfv3AreaSummary controls the im-
port of Inter-Area LSAs into stub areas. It has
no effect on other areas.

If it is noAreaSummary, the router will neither
originate nor propagate In…
Enumerationr/w
Enumerated Values:
1noAreaSummary
2sendAreaSummary
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.8
rcOspfv3AreaStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.9
rcOspfv3StubMetric
The metric value advertised for the default route
into Stub and NSSA areas.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.10
rcOspfv3AreaNssaTranslatorRole
Indicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs.
Enumerationr/w
Enumerated Values:
1always
2candidate
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.11
rcOspfv3AreaNssaTranslatorState
Indicates if and how an NSSA Border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA
Border router's rcOspfv3AreaNssTranslatorRole
has been set to alway…
Enumeration
Enumerated Values:
1enabled
2elected
3disabled
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.12
rcOspfv3AreaNssaTranslatorStabilityInterval
The number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.13
rcOspfv3AreaNssaTranslatorEvents
Indicates the number of Translator State changes
that have occurred since the last boot-up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.14
rcOspfv3AreaStubMetricType
This variable displays the type of metric ad-
vertised as a default route.
Enumerationr/w
Enumerated Values:
1ospfv3Metric
2comparableCost
3nonComparable
 .1.3.6.1.4.1.2272.1.67.1.1.2.1.15

rcOspfv3AsLsdbTable

table
.1.3.6.1.4.1.2272.1.67.1.1.3 · 1 row entry · 8 columns
Open in standard view 
The OSPFv3 Process's AS-Scope Link State Database.
rcOspfv3AsLsdbEntry entry .1.3.6.1.4.1.2272.1.67.1.1.3.1
A single AS-Scope Link State Advertisement.
Indexes
rcOspfv3AsLsdbType rcOspfv3AsLsdbRouterId rcOspfv3AsLsdbLsid
Column Syntax OID
rcOspfv3AsLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. AS-Scope LSAs not recognized by
the router may be stored in the database.
Enumeration
Enumerated Values:
8linkLsa
8193routerLink
8194networkLink
8195interAreaPrefix
8196interAreaRouter
8199type7
8201intraAreaPrefix
16389asExternal
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.1
rcOspfv3AsLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.2
rcOspfv3AsLsdbLsid
The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
address…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.3
rcOspfv3AsLsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.4
rcOspfv3AsLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.5
rcOspfv3AsLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.6
rcOspfv3AsLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.7
rcOspfv3AsLsdbTypeKnown
Is the LSA type recognized by this Router?
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.3.1.8

rcOspfv3AreaLsdbTable

table
.1.3.6.1.4.1.2272.1.67.1.1.4 · 1 row entry · 9 columns
Open in standard view 
The OSPFv3 Process's Area-Scope Link State Database.
rcOspfv3AreaLsdbEntry entry .1.3.6.1.4.1.2272.1.67.1.1.4.1
A single Area-Scope Link State Advertisement.
Indexes
rcOspfv3AreaLsdbAreaId rcOspfv3AreaLsdbType rcOspfv3AreaLsdbRouterId rcOspfv3AreaLsdbLsid
Column Syntax OID
rcOspfv3AreaLsdbAreaId
The 32 bit identifier of the Area from which the
LSA was received.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.1
rcOspfv3AreaLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Area-Scope LSAs unrecognized by the
router are also stored in this database.
Enumeration
Enumerated Values:
8linkLsa
8193routerLink
8194networkLink
8195interAreaPrefix
8196interAreaRouter
8199type7
8201intraAreaPrefix
16389asExternal
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.2
rcOspfv3AreaLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.3
rcOspfv3AreaLsdbLsid
The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
address…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.4
rcOspfv3AreaLsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.5
rcOspfv3AreaLsdbAge
This field is the age of the link state adver-
tisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.6
rcOspfv3AreaLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.7
rcOspfv3AreaLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.8
rcOspfv3AreaLsdbTypeKnown
Is the LSA type recognized by this Router?
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.4.1.9

rcOspfv3LinkLsdbTable

table
.1.3.6.1.4.1.2272.1.67.1.1.5 · 1 row entry · 9 columns
Open in standard view 
The OSPFv3 Process's Link-Scope Link State Database.
rcOspfv3LinkLsdbEntry entry .1.3.6.1.4.1.2272.1.67.1.1.5.1
A single Link-Scope Link State Advertisement.
Indexes
rcOspfv3LinkLsdbIfIndex rcOspfv3LinkLsdbType rcOspfv3LinkLsdbRouterId rcOspfv3LinkLsdbLsid
Column Syntax OID
rcOspfv3LinkLsdbIfIndex
The identifier of the link from which the LSA
was received.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.1
rcOspfv3LinkLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Link-Scope LSAs unrecognized by the
router are also stored in this database.
Enumeration
Enumerated Values:
8linkLsa
8193routerLink
8194networkLink
8195interAreaPrefix
8196interAreaRouter
8199type7
8201intraAreaPrefix
16389asExternal
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.2
rcOspfv3LinkLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.3
rcOspfv3LinkLsdbLsid
The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
address…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.4
rcOspfv3LinkLsdbSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.5
rcOspfv3LinkLsdbAge
This field is the age of the link state
advertisement in seconds.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.6
rcOspfv3LinkLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.7
rcOspfv3LinkLsdbAdvertisement
The entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.8
rcOspfv3LinkLsdbTypeKnown
Indicates whether the LSA type is recognized by this
Router.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.5.1.9

rcOspfv3HostTable

table
.1.3.6.1.4.1.2272.1.67.1.1.6 · 1 row entry · 5 columns
Open in standard view 
The list of Hosts, and their metrics, that the
router will advertise as host routes.
rcOspfv3HostEntry entry .1.3.6.1.4.1.2272.1.67.1.1.6.1
A metric to be advertised when a given host is
reachable.
Indexes
rcOspfv3HostAddressType rcOspfv3HostAddress
Column Syntax OID
rcOspfv3HostAddressType
The address type of rcOspfv3HostAddress. Only IPv6
addresses without zone index are expected.
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
 .1.3.6.1.4.1.2272.1.67.1.1.6.1.1
rcOspfv3HostAddress
The IPv6 Address of the Host. Must be a Global
or Site-local address.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2272.1.67.1.1.6.1.2
rcOspfv3HostMetric
The Metric to be advertised.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.67.1.1.6.1.3
rcOspfv3HostStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.6.1.4
rcOspfv3HostAreaID
The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3 in-
terface is in, or 0.0.0.0
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.6.1.5

rcOspfv3IfTable

table
.1.3.6.1.4.1.2272.1.67.1.1.7 · 1 row entry · 24 columns
Open in standard view 
The OSPFv3 Interface Table describes the  inter-
faces from the viewpoint of OSPFv3.
rcOspfv3IfEntry entry .1.3.6.1.4.1.2272.1.67.1.1.7.1
The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3.
Indexes
rcOspfv3IfIndex
Column Syntax OID
rcOspfv3IfIndex
The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.1
rcOspfv3IfAreaId
A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.2
rcOspfv3IfType
The OSPFv3 interface type.
Enumerationr/w
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
6passive
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.3
rcOspfv3IfAdminStat
The OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is exter…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.4
rcOspfv3IfRtrPriority
The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designate…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.5
rcOspfv3IfTransitDelay
The estimated number of seconds it takes to
transmit a link state update packet over this
interface.
secondsInteger32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.6
rcOspfv3IfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request …
secondsInteger32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.7
rcOspfv3IfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.8
rcOspfv3IfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for a…
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.9
rcOspfv3IfPollInterval
The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.10
rcOspfv3IfState
The OSPFv3 Interface State.
Enumeration
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.11
rcOspfv3IfDesignatedRouter
The Router ID of the Designated Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.12
rcOspfv3IfBackupDesignatedRouter
The Router ID of the Backup Designated
Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.14
rcOspfv3IfEvents
The number of times this OSPF interface has
changed its state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.15
rcOspfv3IfStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.17
rcOspfv3IfMulticastForwarding
The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NB…
Enumerationr/w
Enumerated Values:
1blocked
2multicast
3unicast
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.18
rcOspfv3IfDemand
Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.19
rcOspfv3IfMetricValue
The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value of the
reference bandwidth is configured by the
rcOspfv3ReferenceBandwidth object. A value of '0' means
…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.20
rcOspfv3IfLinkScopeLsaCount
The total number of Link-Scope link-state
advertisements in this link's link-state database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.21
rcOspfv3IfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link sta…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.22
rcOspfv3IfInstId
Enables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.23
rcOspfv3IfDemandNbrProbe
Indicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.24
rcOspfv3IfDemandNbrProbeRetxLimit
The number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.25
rcOspfv3IfDemandNbrProbeInterval
Defines how often the neighbor will be probed.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.7.1.26

rcOspfv3VirtIfTable

table
.1.3.6.1.4.1.2272.1.67.1.1.8 · 1 row entry · 12 columns
Open in standard view 
Information about this router's virtual inter-
faces.
rcOspfv3VirtIfEntry entry .1.3.6.1.4.1.2272.1.67.1.1.8.1
Information about a single Virtual Interface.
Indexes
rcOspfv3VirtIfAreaId rcOspfv3VirtIfNeighbor
Column Syntax OID
rcOspfv3VirtIfAreaId
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.1
rcOspfv3VirtIfNeighbor
The Router ID of the Virtual Neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.2
rcOspfv3VirtIfIndex
The interface ID assigned to this OSPFv3 virtual
interface. It is advertised in Hello's sent over
the virtal link and in the router's router-LSAs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.3
rcOspfv3VirtIfTransitDelay
The estimated number of seconds it takes to
transmit a link- state update packet over this
interface.
secondsInteger32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.4
rcOspfv3VirtIfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state reque…
secondsInteger32r/w
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.5
rcOspfv3VirtIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.6
rcOspfv3VirtIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for t…
secondsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.7
rcOspfv3VirtIfState
OSPF virtual interface states.
Enumeration
Enumerated Values:
1down
4pointToPoint
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.8
rcOspfv3VirtIfEvents
The number of state changes or error events on
this Virtual Link
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.9
rcOspfv3VirtIfStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.10
rcOspfv3VirtIfLinkScopeLsaCount
The total number of Link-Scope link-state
advertisements in this virtual link's link-state
database.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.11
rcOspfv3VirtIfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.8.1.12

rcOspfv3NbrTable

table
.1.3.6.1.4.1.2272.1.67.1.1.9 · 1 row entry · 15 columns
Open in standard view 
A table of non-virtual neighbor information.
rcOspfv3NbrEntry entry .1.3.6.1.4.1.2272.1.67.1.1.9.1
The information regarding a single neighbor.
Indexes
rcOspfv3NbrIfIndex rcOspfv3NbrRtrId
Column Syntax OID
rcOspfv3NbrIfIndex
The local link ID of the link over which the
neighbor can be reached.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.1
rcOspfv3NbrRtrId
A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.2
rcOspfv3NbrAddressType
The address type of rcOspfv3NbrAddress. Only IPv6
addresses without zone index are expected.
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.3
rcOspfv3NbrAddress
The IPv6 address of the neighbor associated with
the local link.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.4
rcOspfv3NbrOptions
A Bit Mask corresponding to the neighbor's op-
tions field.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.5
rcOspfv3NbrPriority
The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.6
rcOspfv3NbrState
The State of the relationship with this Neigh-
bor.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.7
rcOspfv3NbrEvents
The number of times this neighbor relationship
has changed state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.8
rcOspfv3NbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.9
rcOspfv3NbrHelloSuppressed
Indicates whether Hellos are being suppressed
to the neighbor
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.10
rcOspfv3NbrIfId
The interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.11
rcOspfv3NbrRestartHelperStatus
Indicates whether the router is acting
as a hitless restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.12
rcOspfv3NbrRestartHelperAge
Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsInteger32
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.13
rcOspfv3NbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.14
rcOspfv3NbrDeadIntCnt
This is a Dead interval Count or TTL (time to live) field that
indicates how many seconds are left before the Neighbor is
declared down. The starting value is set to the Router Dead
Interval value and it decrements …
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.9.1.15

rcOspfv3NbmaNbrTable

table
.1.3.6.1.4.1.2272.1.67.1.1.10 · 1 row entry · 7 columns
Open in standard view 
A table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery.
rcOspfv3NbmaNbrEntry entry .1.3.6.1.4.1.2272.1.67.1.1.10.1
The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery.
Indexes
rcOspfv3NbmaNbrIfIndex rcOspfv3NbmaNbrAddress
Column Syntax OID
rcOspfv3NbmaNbrIfIndex
The local link ID of the link over which the
neighbor can be reached.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.1
rcOspfv3NbmaNbrAddress
The IPv6 address of the neighbor associated with
the local link.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.2
rcOspfv3NbmaNbrPriority
The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.3
rcOspfv3NbmaNbrRtrId
A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System. A value of
0.0.0.0 is returned until a Hello is received
from the configured neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.4
rcOspfv3NbmaNbrState
The State of the relationship with this Neigh-
bor.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.5
rcOspfv3NbmaNbrStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type
of nonVolatile …
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.6
rcOspfv3NbmaNbrStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.10.1.7

rcOspfv3VirtNbrTable

table
.1.3.6.1.4.1.2272.1.67.1.1.11 · 1 row entry · 14 columns
Open in standard view 
A table of virtual neighbor information.
rcOspfv3VirtNbrEntry entry .1.3.6.1.4.1.2272.1.67.1.1.11.1
Virtual neighbor information.
Indexes
rcOspfv3VirtNbrArea rcOspfv3VirtNbrRtrId
Column Syntax OID
rcOspfv3VirtNbrArea
The Transit Area Identifier.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.1
rcOspfv3VirtNbrRtrId
A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.2
rcOspfv3VirtNbrIfIndex
The local interface ID for the virtual link over
which the neighbor can be reached.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.3
rcOspfv3VirtNbrAddressType
The address type of rcOspfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected.
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.4
rcOspfv3VirtNbrAddress
The IPv6 address advertised by this Virtual Neighbor.
It must be a Site-Local or Global scope address.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.5
rcOspfv3VirtNbrOptions
A Bit Mask corresponding to the neighbor's op-
tions field.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.6
rcOspfv3VirtNbrState
The state of the Virtual Neighbor Relation-
ship.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.7
rcOspfv3VirtNbrEvents
The number of times this virtual link has
changed its state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.8
rcOspfv3VirtNbrLsRetransQLen
The current length of the retransmission
queue.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.9
rcOspfv3VirtNbrHelloSuppressed
Indicates whether Hellos are being suppressed
to the neighbor
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.10
rcOspfv3VirtNbrIfId
The interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.11
rcOspfv3VirtNbrRestartHelperStatus
Indicates whether the router is acting
as a hitless restart helper for the neighbor.
Enumeration
Enumerated Values:
1notHelping
2helping
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.12
rcOspfv3VirtNbrRestartHelperAge
Remaining time in current OSPF hitless restart
interval, if the router is acting as a restart
helper for the neighbor.
secondsInteger32
Constraints:
range: 1-1800
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.13
rcOspfv3VirtNbrRestartHelperExitReason
Describes the outcome of the last attempt at acting
as a hitless restart helper for the neighbor.
Enumeration
Enumerated Values:
1none
2inProgress
3completed
4timedOut
5topologyChanged
 .1.3.6.1.4.1.2272.1.67.1.1.11.1.14

rcOspfv3AreaAggregateTable

table
.1.3.6.1.4.1.2272.1.67.1.1.12 · 1 row entry · 8 columns
Open in standard view 
A range of IPv6 prefixes specified by a
prefix/prefix length  pair. Note that if
ranges are configured such that one range sub-
sumes  another range the most specific match is
the preferred one.
rcOspfv3AreaAggregateEntry entry .1.3.6.1.4.1.2272.1.67.1.1.12.1
A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one.
Indexes
rcOspfv3AreaAggregateAreaID rcOspfv3AreaAggregateAreaLsdbType rcOspfv3AreaAggregatePrefix rcOspfv3AreaAggregatePrefixLength
Column Syntax OID
rcOspfv3AreaAggregateAreaID
The Area the Address Aggregate is to be found
within.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.1
rcOspfv3AreaAggregateAreaLsdbType
The type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
gregate applies to.
Enumeration
Enumerated Values:
8195interAreaPrefixLsa
8199nssaExternalLsa
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.2
rcOspfv3AreaAggregatePrefix
The IPv6 Prefix.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.3
rcOspfv3AreaAggregatePrefixLength
The length of the prefix (in bits). A prefix can
not be shorter than 3 bits.
bitsUnsigned32
Constraints:
range: 3-128
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.4
rcOspfv3AreaAggregateStatus
This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6].
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.5
rcOspfv3AreaAggregateEffect
Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the prefix not
being advertised at all outside the area.
Enumerationr/w
Enumerated Values:
1advertiseMatching
2doNotAdvertiseMatching
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.6
rcOspfv3AreaAggregateRouteTag
This tag is advertised only in the summarized
As-External LSA when summarizing from type-7 to
type-5.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.7
rcOspfv3AreaAggregateAdvertiseMetric
Used to specify a metric for a Summary LSA (type 3)
generated by OSPF through an area range.
If this metric is set to 0, OSPF uses the cost
to the farthest point in the networks being
summarized as the metric.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.67.1.1.12.1.8

rcCfmMaintenanceDomainTable

table
.1.3.6.1.4.1.2272.1.69.1 · 1 row entry · 7 columns
Open in standard view 
Connectivity Fault Management Maintenance Domain table
rcCfmMaintenanceDomainEntry entry .1.3.6.1.4.1.2272.1.69.1.1
Connectivity Fault Management Maintenance Domain entry.
Indexes
rcCfmMaintenanceDomainIndex
Column Syntax OID
rcCfmMaintenanceDomainIndex
Maintenance Domain index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.1.1.1
rcCfmMaintenanceDomainName
Maintenance Domain Name
OctetStringr/w
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.1.1.2
rcCfmMaintenanceDomainRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.69.1.1.3
rcCfmMaintenanceDomainNumOfMa
Used to indicate the number of MAs belong
to this maintenance domain
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.1.1.4
rcCfmMaintenanceDomainLevel
To set the maintenance level in this domain
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.69.1.1.6
rcCfmMaintenanceDomainNumOfMip
Used to indicate the number of Mips belong
to this maintenance domain
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.1.1.7
rcCfmMaintenanceDomainType
To indicate the type of domain
Enumeration
Enumerated Values:
0none
1trunk
2sg
3endpt
4vlan
5port
6mimencapvlan
7nodal
 .1.3.6.1.4.1.2272.1.69.1.1.8

rcCfmMaintenanceAssociationTable

table
.1.3.6.1.4.1.2272.1.69.2 · 1 row entry · 7 columns
Open in standard view 
Connectivity Fault Management Maintenance Association table
rcCfmMaintenanceAssociationEntry entry .1.3.6.1.4.1.2272.1.69.2.1
Connectivity Fault Management Maintenance Association entry.
Indexes
rcCfmMaintenanceAssociationDomainIndex rcCfmMaintenanceAssociationAssociationIndex
Column Syntax OID
rcCfmMaintenanceAssociationDomainIndex
Maintenance Association Domain Index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.2.1.1
rcCfmMaintenanceAssociationAssociationIndex
Maintenance Association Index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.2.1.2
rcCfmMaintenanceAssociationDomainName
Maintenance Association Domain Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.2.1.3
rcCfmMaintenanceAssociationAssociationName
Maintenance Association Name
OctetStringr/w
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.2.1.4
rcCfmMaintenanceAssociationAdminState
Administratively enable or disable a maintenance association.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.69.2.1.5
rcCfmMaintenanceAssociationRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.69.2.1.6
rcCfmMaintenanceAssociationNumOfMep
Used to indicate the number of MEPs belong
to this maintenance association
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.2.1.12

rcCfmMaintenanceEndPointTable

table
.1.3.6.1.4.1.2272.1.69.3 · 1 row entry · 10 columns
Open in standard view 
Connectivity Fault Management Maintenance Association table
rcCfmMaintenanceEndPointEntry entry .1.3.6.1.4.1.2272.1.69.3.1
Connectivity Fault Management Maintenance EndPoint entry.
Indexes
rcCfmMaintenanceEndPointDomainIndex rcCfmMaintenanceEndPointAssociationIndex rcCfmMaintenanceEndPointId
Column Syntax OID
rcCfmMaintenanceEndPointDomainIndex
Maintenance Domain Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.3.1.1
rcCfmMaintenanceEndPointAssociationIndex
Maintenance Association Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.3.1.2
rcCfmMaintenanceEndPointId
Maintenance EndPoint ID
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2272.1.69.3.1.3
rcCfmMaintenanceEndPointDomainName
Maintenance Domain Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.3.1.4
rcCfmMaintenanceEndPointAssociationName
Maintenance Association Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.3.1.5
rcCfmMaintenanceEndPointAdminState
Administratively enable or disable a maintenance EndPoint.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.69.3.1.6
rcCfmMaintenanceEndPointRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.69.3.1.7
rcCfmMaintenanceEndPointMepType
Mep Type
Enumeration
Enumerated Values:
1trunk
2sg
4endpt
8unused
16vlan
32port
64endptClient
32769remotetrunk
32770remotesg
32772remoteendpt
32784remoteVlan
32800remotePort
32832remoteEndptClient
3145728nodal
 .1.3.6.1.4.1.2272.1.69.3.1.11
rcCfmMaintenanceEndPointServiceDescription
Used to specify what service this mep assigned to
OctetString
Constraints:
range: 0-48
 .1.3.6.1.4.1.2272.1.69.3.1.13
rcCfmMaintenanceEndPointMepStatus
Indicating if the mep status is active or inactive.
Only Dual-Home Ring endpoint client meps can have
active/inactive status. All other mep types have
active status.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.2272.1.69.3.1.15

rcCfmTransmitLbmTable

table
.1.3.6.1.4.1.2272.1.69.17 · 1 row entry · 21 columns
Open in standard view 
Connectivity Fault Management transmit LBM table
rcCfmTransmitLbmEntry entry .1.3.6.1.4.1.2272.1.69.17.1
Connectivity Fault Management Maintenance EndPoint LBM entry.
Indexes
rcCfmTransmitLbmDomainIndex rcCfmTransmitLbmAssociationIndex rcCfmTransmitLbmIndex
Column Syntax OID
rcCfmTransmitLbmDomainIndex
Maintenance Domain Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.17.1.1
rcCfmTransmitLbmAssociationIndex
Maintenance Association Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.17.1.2
rcCfmTransmitLbmIndex
Maintenance EndPoint Index
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2272.1.69.17.1.3
rcCfmTransmitLbmDomainName
Maintenance Domain Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.17.1.4
rcCfmTransmitLbmAssociationName
Maintenance Association Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.17.1.5
rcCfmTransmitLbmDestMacAddress
An indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.17.1.6
rcCfmTransmitLbmDestMepId
An indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Association
Integer32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.2272.1.69.17.1.7
rcCfmTransmitLbmDestIsMepId
True indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.17.1.8
rcCfmTransmitLbmMessages
The number of loopback messages to be transmitted.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.2272.1.69.17.1.9
rcCfmTransmitLbmVlanPriority
Priority. 3 bit value to be used in the VLAN tsg, if present in
the transmitted frame.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.69.17.1.11
rcCfmTransmitLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in
the transmitted frame.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.17.1.12
rcCfmTransmitLbmSeqNumber
The transaction identifier/sequence number of the first loopback
message (to be) sent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.17.1.13
rcCfmTransmitLbmResultOk
Indicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.17.1.14
rcCfmTransmitLbmStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to transmit,
the Loopback messages.
-abort The service is aborted or about …
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.17.1.15
rcCfmTransmitLbmResult
Display the LBM result.
OctetString
Constraints:
range: 1-799
 .1.3.6.1.4.1.2272.1.69.17.1.16
rcCfmTransmitLbmTimeoutInt
The interval to wait for an LBM time-out with a
range of (1..10) seconds with a default value of 3
seconds.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.69.17.1.18
rcCfmTransmitLbmInterFrameInt
The interval between LBM frames with a range of
(0..1000) msecs with a default value of 500 msecs.
The value of 0 msecs indicates to send the frames as
fast as possible.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.69.17.1.19
rcCfmTransmitLbmTestPattern
The test pattern to use in the LBM PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning
-----…
Enumerationr/w
Enumerated Values:
1allZero
2allZeroCrc
3pseudoRandomBitSequence
4pseudoRandomBitSequenceCrc
 .1.3.6.1.4.1.2272.1.69.17.1.20
rcCfmTransmitLbmDataSize
An arbitrary amount of data to be included in the data TLV, if the
Data Size is selected to be sent.
Integer32r/w
Constraints:
range: 0-400
 .1.3.6.1.4.1.2272.1.69.17.1.21
rcCfmTransmitLbmFrameSize
If the frame size (64-500 for R-Mod and 64-9600 for RC-Mod)is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.
Integer32r/w
Constraints:
range: 0-9600
 .1.3.6.1.4.1.2272.1.69.17.1.22
rcCfmTransmitLbmSourceMode
Source modes of the transmit loopback service.
Enumerationr/w
Enumerated Values:
1nodal
2smltVirtual
 .1.3.6.1.4.1.2272.1.69.17.1.23

rcCfmTransmitLtmTable

table
.1.3.6.1.4.1.2272.1.69.18 · 1 row entry · 16 columns
Open in standard view 
Connectivity Fault Management transmit LTM table
rcCfmTransmitLtmEntry entry .1.3.6.1.4.1.2272.1.69.18.1
Connectivity Fault Management Maintenance EndPoint LTM entry.
Indexes
rcCfmTransmitLtmDomainIndex rcCfmTransmitLtmAssociationIndex rcCfmTransmitLtmIndex
Column Syntax OID
rcCfmTransmitLtmDomainIndex
Maintenance Domain Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.18.1.1
rcCfmTransmitLtmAssociationIndex
Maintenance Association Name
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.18.1.2
rcCfmTransmitLtmIndex
Maintenance EndPoint Index
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2272.1.69.18.1.3
rcCfmTransmitLtmDomainName
Maintenance Domain Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.18.1.4
rcCfmTransmitLtmAssociationName
Maintenance Association Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.18.1.5
rcCfmTransmitLtmVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present in
the transmitted frame.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.69.18.1.6
rcCfmTransmitLtmDestMacAddress
An indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.18.1.7
rcCfmTransmitLtmDestMepId
An indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Association
Integer32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.2272.1.69.18.1.8
rcCfmTransmitLtmDestIsMepId
True indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.18.1.9
rcCfmTransmitLtmTtl
The number of hops remaining to this LTM.
Decremented by 1 by each Bridge that handles the LTM.
The decremented value is returned in the LTR. If 0
on output, the LTM is not transmitted to the next
hop. The value of …
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.18.1.10
rcCfmTransmitLtmSeqNumber
The transaction identifier/sequence number of the first loopback
message (to be) sent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.18.1.11
rcCfmTransmitLtmResultOk
Indicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.18.1.12
rcCfmTransmitLtmStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the Loopback messages.

-abort. The service…
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.18.1.13
rcCfmTransmitLtmResult obsolete
Display the LTM result.
OctetString
Constraints:
range: 1-1023
 .1.3.6.1.4.1.2272.1.69.18.1.14
rcCfmTransmitLtmFlag
LTM result flag indicating LTM status or error code.
Each enum value represents a status or error case.
1 - No error
2 - Ltm Internal Error
3 - Unknown Remote Maintenance End Point
4 - Invalid Remote Maintenance En…
Enumeration
Enumerated Values:
1none
2internalError
3noRemoteMep
4invalidRemoteMepMac
5noRemoteMepMacLearned
6mepDisabled
7noLtrResponse
8ltmToOwnMepMac
9epDisabled
10trunkDisabled
11ltmComplete
12ltmLeafNode
 .1.3.6.1.4.1.2272.1.69.18.1.15
rcCfmTransmitLtmSourceMode
Source modes of the transmit linktrace service.
Enumerationr/w
Enumerated Values:
1nodal
2smltVirtual
 .1.3.6.1.4.1.2272.1.69.18.1.16

rcCfmLtrReplyTable

table
.1.3.6.1.4.1.2272.1.69.33 · 1 row entry · 23 columns
Open in standard view 
This table contains a list of Linktrace replies received 
by a specific MEP in response to a linktrace message.
rcCfmLtrReplyEntry entry .1.3.6.1.4.1.2272.1.69.33.1
The Linktrace Reply table entry.
Indexes
rcCfmLtrReplyDomainIndex rcCfmLtrReplyAssociationIndex rcCfmLtrReplyMepId rcCfmLtrReplySeqNumber rcCfmLtrReplyHop rcCfmLtrReplyReceiveOrder
Column Syntax OID
rcCfmLtrReplyDomainIndex
Maintenance Domain Index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.33.1.1
rcCfmLtrReplyAssociationIndex
Maintenance Association Index
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.33.1.2
rcCfmLtrReplyMepId
Maintenance EndPoint ID
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2272.1.69.33.1.3
rcCfmLtrReplySeqNumber
The transaction identifier/sequence number returned by a
previous transmit linktrace message command, indicating which
LTM's response is going to be returned.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.33.1.4
rcCfmLtrReplyHop
The number of hops away from LTM initiator
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.33.1.5
rcCfmLtrReplyReceiveOrder
An index to distinguish among multiple LTRs with the same
LTR Transaction Identifier field value. This value is
assigned sequentially from 1, in the order that the Linktrace
Initiator received the LTRs.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.33.1.6
rcCfmLtrReplyTtl
Ttl field value for a returned LTR.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.33.1.7
rcCfmLtrReplyDomainName
Maintenance Domain Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.33.1.8
rcCfmLtrReplyAssociationName
Maintenance Association Name
OctetString
Constraints:
range: 1-22
 .1.3.6.1.4.1.2272.1.69.33.1.9
rcCfmLtrReplyForwarded
Indicates if a LTM was forwarded by the responding MP, as
returned in the 'FwdYes' flag of the flags field.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.33.1.10
rcCfmLtrReplyTerminalMep
A boolean value stating whether the forwarded LTM reached
a MEP enclosing its MA, as returned in the Terminal MEP flag
of the Flags field.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.33.1.11
rcCfmLtrReplyLastEgressIdentifier
An octet field holding the Last Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR. The Last Egress
Identifier identifies the MEP Linktrace Indicator that
originated, or the Linktrace Responder …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2272.1.69.33.1.12
rcCfmLtrReplyNextEgressIdentifier
An octet field holding the Next Egress Identifier returned in
the LTR Egress Identifier TLV of the LTR. The Next Egress
Identifier Identifies the Linktrace Responder that transmitted
this LTR, and can forward the LTM…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2272.1.69.33.1.13
rcCfmLtrReplyRelayAction
Value returned in the Relay Action field.
CfmRelayActionFieldValue
Textual Convention: CfmRelayActionFieldValue Enumeration
Type Values:
1rlyHit
2rlyFdb
3rlyMpdb
4unknown
 .1.3.6.1.4.1.2272.1.69.33.1.14
rcCfmLtrReplySrcMac
Mac address of the MP that respond to the LTM request for
this LTR
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.33.1.15
rcCfmLtrReplyIngressAction
The value returned in the Ingress Action Field of the LTM.
The value ingNoTlv(5) indicates that no Reply Ingress TLV
was returned in the LTM.
CfmIngressActionFieldValue
Textual Convention: CfmIngressActionFieldValue Enumeration
Type Values:
1ingOk
2ingDown
3ingBlocked
4ingVid
5ingNoTlv
 .1.3.6.1.4.1.2272.1.69.33.1.16
rcCfmLtrReplyIngressMac
Mac address returned in the ingress MAC address field. If the
rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then
the contents of this object are meaningless.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.33.1.17
rcCfmLtrReplyIngressPortIdSubtype
Format of the Ingress Port ID. If the rcCfmLtrReplyIngress
object contains the value ingNoTlv(5), then the contents of
this object are meaningless.
LldpPortIdSubtype
Textual Convention: LldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2272.1.69.33.1.18
rcCfmLtrReplyIngressPortId
Ingress Port ID. The format of this object is determined by
the value of the rcCfmLtrReplyIngressPortIdSubtype object.
If the rcCfmLtrReplyIngress object contains the value
ingNoTlv(5), then
the contents of this obj…
LldpPortId
Textual Convention: LldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2272.1.69.33.1.19
rcCfmLtrReplyEgressAction
The value returned in the Egress Action Field of the LTM. The
value egrNoTlv(5) indicates that no Reply Egress TLV was
returned in the LTM.
CfmEgressActionFieldValue
Textual Convention: CfmEgressActionFieldValue Enumeration
Type Values:
1egrOk
2egrDown
3egrBlocked
4egrVid
5egrNoTlv
 .1.3.6.1.4.1.2272.1.69.33.1.20
rcCfmLtrReplyEgressMac
Mac address returned in the egress MAC address field. If the
rcCfmLtrReplyEgress object contains the value egrNoTlv(5),
then the contents of this object are meaningless.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.33.1.21
rcCfmLtrReplyEgressPortIdSubtype
Format of the Egress Port ID. If the rcCfmLtrReplyEgress
object contains the value egrNoTlv(5), then the contents
of this object are meaningless.
LldpPortIdSubtype
Textual Convention: LldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2272.1.69.33.1.22
rcCfmLtrReplyEgressPortId
Egress Port ID. The format of this object is determined by
the value of the rcCfmLtrReplyEgressPortIdSubtype object.
If the rcCfmLtrReplyEgress object contains the value
egrNoTlv(5), then the contents of this object …
LldpPortId
Textual Convention: LldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2272.1.69.33.1.23

rcCfmTransmitL2PingTable

table
.1.3.6.1.4.1.2272.1.69.34 · 1 row entry · 15 columns
Open in standard view 
Connectivity Fault Management transmit L2Ping table
rcCfmTransmitL2PingEntry entry .1.3.6.1.4.1.2272.1.69.34.1
Connectivity Fault Management Maintenance EndPoint L2Ping entry.
Indexes
rcCfmTransmitL2PingVlanId
Column Syntax OID
rcCfmTransmitL2PingVlanId
A value that uniquely identifies the Customer Vlan
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.69.34.1.1
rcCfmTransmitL2PingDestMacAddress
An indication of the target MAC Address field to be transmitted
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.34.1.2
rcCfmTransmitL2PingHostName
The target host name
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.34.1.3
rcCfmTransmitL2PingDestIsHostName
True indicates that the host name is used for L2Ping transmission
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.34.1.4
rcCfmTransmitL2PingMessages
The number of L2Ping messages to be transmitted.
Integer32r/w
Constraints:
range: 1-200
 .1.3.6.1.4.1.2272.1.69.34.1.5
rcCfmTransmitL2PingPriority
Priority. 3 bit value to be used in the VLAN hdr,
if present in the transmitted frame.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.69.34.1.6
rcCfmTransmitL2PingTimeoutInt
The interval to wait for an L2Ping time-out with a
range of (1..10) seconds with a default value of 3
seconds.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.69.34.1.7
rcCfmTransmitL2PingTestPattern
The test pattern to use in the L2Ping PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning
--…
Enumerationr/w
Enumerated Values:
1allZero
2allZeroCrc
3pseudoRandomBitSequence
4pseudoRandomBitSequenceCrc
 .1.3.6.1.4.1.2272.1.69.34.1.8
rcCfmTransmitL2PingDataSize
An arbitrary amount of data to be included in the data TLV, if the
Data Size is selected to be sent.
Integer32r/w
Constraints:
range: 0-400
 .1.3.6.1.4.1.2272.1.69.34.1.9
rcCfmTransmitL2PingFrameSize
If the frame size is specified then the data size
shall be internally calculated and the calculated data
size shall be included in the data TLV.
Integer32r/w
Constraints:
range: 0-9600
 .1.3.6.1.4.1.2272.1.69.34.1.10
rcCfmTransmitL2PingSourceMode
Source modes of the transmit loopback service.
Enumerationr/w
Enumerated Values:
1nodal
2smltVirtual
 .1.3.6.1.4.1.2272.1.69.34.1.11
rcCfmTransmitL2PingSeqNumber
The transaction identifier/sequence number of the first loopback
message (to be) sent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.34.1.12
rcCfmTransmitL2PingResultOk
Indicates the result of the operation:
-true. The L2Ping Message(s) will be (or have been) sent.
-false. The L2Ping Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.34.1.13
rcCfmTransmitL2PingStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Ping messages.
-abort The service is aborted or ab…
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.34.1.14
rcCfmTransmitL2PingResult
Display the L2Ping result.
OctetString
Constraints:
range: 1-799
 .1.3.6.1.4.1.2272.1.69.34.1.15

rcCfmTransmitL2TraceTable

table
.1.3.6.1.4.1.2272.1.69.35 · 1 row entry · 14 columns
Open in standard view 
Connectivity Fault Management transmit L2Trace table
rcCfmTransmitL2TraceEntry entry .1.3.6.1.4.1.2272.1.69.35.1
Connectivity Fault Management Maintenance EndPoint L2Trace entry.
Indexes
rcCfmTransmitL2TraceVlanId
Column Syntax OID
rcCfmTransmitL2TraceVlanId
A value that uniquely identifies the Customer Vlan
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.69.35.1.1
rcCfmTransmitL2TracePriority
Priority. 3 bit value to be used in the VLAN hdr,
if present in the transmitted frame.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.69.35.1.2
rcCfmTransmitL2TraceDestMacAddress
An indication of the target MAC Address field to be transmitted
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.35.1.3
rcCfmTransmitL2TraceHostName
The target host name
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.35.1.4
rcCfmTransmitL2TraceIsid
Isid Id
Integer32r/w
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2272.1.69.35.1.5
rcCfmTransmitL2TraceNickName
Local Node nick name
OctetString
Constraints:
range: 7-7
 .1.3.6.1.4.1.2272.1.69.35.1.6
rcCfmTransmitL2TraceDestIsHostName
True indicates that the host name is used for L2Trace transmission
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.35.1.7
rcCfmTransmitL2TraceIsidTree
True indicates that the multicast tree will be traced.
False indicates that the unicast path will be traced
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.35.1.8
rcCfmTransmitL2TraceTtl
The number of hops remaining to this L2Trace.
Decremented by 1 by each Bridge that handles the L2Trace.
The decremented value is returned in the L2Trace. If 0
on output, the L2Trace is not transmitted to the next
ho…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.35.1.9
rcCfmTransmitL2TraceSourceMode
Source modes of the transmit loopback service.
Enumerationr/w
Enumerated Values:
1nodal
2smltVirtual
 .1.3.6.1.4.1.2272.1.69.35.1.10
rcCfmTransmitL2TraceSeqNumber
The transaction identifier/sequence number of the first loopback
message (to be) sent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.35.1.11
rcCfmTransmitL2TraceResultOk
Indicates the result of the operation:
-true. The L2Trace Message(s) will be (or have been) sent.
-false. The L2Trace Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.35.1.12
rcCfmTransmitL2TraceStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Trace messages.
-abort The service is aborted or a…
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.35.1.13
rcCfmTransmitL2TraceFlag
L2Trace result flag indicating L2Trace status or error code.
Each enum value represents a status or error case.
1 - No error
2 - L2Trace Internal Error
3 - Invalid Mac Address
4 - Mep must be enabled in order to pe…
Enumeration
Enumerated Values:
1none
2internalError
3invalidMac
4mepDisabled
5noL2TraceResponse
6l2TraceToOwnMepMac
7l2TraceComplete
8l2TraceLookupFailure
9l2TraceLeafNode
10l2TraceNotInTree
11l2TraceSmltNotPrimary
 .1.3.6.1.4.1.2272.1.69.35.1.14

rcCfmL2TraceReplyTable

table
.1.3.6.1.4.1.2272.1.69.36 · 1 row entry · 9 columns
Open in standard view 
This table contains a list of l2trace replies received 
by a specific MEP in response to a linktrace message.
rcCfmL2TraceReplyEntry entry .1.3.6.1.4.1.2272.1.69.36.1
The Linktrace Reply table entry.
Indexes
rcCfmL2TraceReplyVlanId rcCfmL2TraceReplySeqNumber rcCfmL2TraceReplyHop rcCfmL2TraceReplyReceiveOrder
Column Syntax OID
rcCfmL2TraceReplyVlanId
A value that uniquely identifies the Customer Vlan
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.69.36.1.1
rcCfmL2TraceReplySeqNumber
The transaction identifier/sequence number returned by a
previous transmit linktrace message command, indicating which
L2Trace's response is going to be returned.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.36.1.2
rcCfmL2TraceReplyHop
The number of hops away from L2Trace initiator.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.36.1.3
rcCfmL2TraceReplyReceiveOrder
An index to distinguish among multiple L2Trace responses
with the same Transaction Identifier field value. This value
is assigned sequentially from 1, in the order that the
Linktrace Initiator received the responses.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2272.1.69.36.1.4
rcCfmL2TraceReplyTtl
Ttl field value for a returned L2Trace response.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.36.1.5
rcCfmL2TraceReplySrcMac
Mac address of the MP that respond to the L2Trace request for
this L2traceReply
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.36.1.6
rcCfmL2TraceReplyHostName
The host name of the replying node
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.36.1.7
rcCfmL2TraceReplyLastSrcMac
The MAC address of the node that forwarded the L2Trace to the responding node
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.36.1.8
rcCfmL2TraceReplyLastHostName
The host name of the node that forwarded the L2Trace to the responding node
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.36.1.9

rcCfmTransmitL2IpPingTable

table
.1.3.6.1.4.1.2272.1.69.37 · 1 row entry · 12 columns
Open in standard view 
Connectivity Fault Management transmit L2IpPing table
rcCfmTransmitL2IpPingEntry entry .1.3.6.1.4.1.2272.1.69.37.1
L2IpPing entry.
Indexes
rcCfmTransmitL2IpPingIpAddrType rcCfmTransmitL2IpPingIpAddr
Column Syntax OID
rcCfmTransmitL2IpPingIpAddrType
The address type of destination IP Address
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.69.37.1.1
rcCfmTransmitL2IpPingIpAddr
Destination IP Address. Support ipv4 at this time
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.69.37.1.2
rcCfmTransmitL2IpPingVrfId
VRF ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.37.1.3
rcCfmTransmitL2IpPingVrfName
The Name of the Virtual Router
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.69.37.1.4
rcCfmTransmitL2IpPingMessages
The number of L2IpPing messages to be transmitted
per mac/vlan pair.
Integer32r/w
Constraints:
range: 1-200
 .1.3.6.1.4.1.2272.1.69.37.1.5
rcCfmTransmitL2IpPingTimeoutInt
The interval to wait for an L2IpPing time-out with a
range of (1..10) seconds with a default value of 3
seconds.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.69.37.1.6
rcCfmTransmitL2IpPingTestPattern
The test pattern to use in the L2IpPing PDUs
with range of values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZero.
value meaning…
Enumerationr/w
Enumerated Values:
1allZero
2allZeroCrc
3pseudoRandomBitSequence
4pseudoRandomBitSequenceCrc
 .1.3.6.1.4.1.2272.1.69.37.1.7
rcCfmTransmitL2IpPingDataSize
An arbitrary amount of data to be included in the
data TLV, if the Data Size is selected to be sent.
Integer32r/w
Constraints:
range: 0-400
 .1.3.6.1.4.1.2272.1.69.37.1.8
rcCfmTransmitL2IpPingStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2IpPing messages.
-abort The service is aborted or …
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.37.1.9
rcCfmTransmitL2IpPingResultOk
Indicates the result of the operation:
-true. L2IpPing Message(s) will be/have been sent.
-false. L2IpPing Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.37.1.10
rcCfmTransmitL2IpPingPathsFound
The number of paths found to execute l2ping command
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.37.1.11
rcCfmTransmitL2IpPingRowStatus
Used to create/delete entries in the
rcCfmTransmitL2IpPingTable. Deletion of an entry
in this table results in corresponding
rcCfmL2IpPingReplyTable entries being deleted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.69.37.1.12

rcCfmL2IpPingReplyTable

table
.1.3.6.1.4.1.2272.1.69.38 · 1 row entry · 18 columns
Open in standard view 
This table contains a list of l2 ip ping replies received
rcCfmL2IpPingReplyEntry entry .1.3.6.1.4.1.2272.1.69.38.1
The L2 Ip Ping Reply table entry.
Indexes
rcCfmL2IpPingReplyIpAddrType rcCfmL2IpPingReplyIpAddr rcCfmL2IpPingReplySendOrder
Column Syntax OID
rcCfmL2IpPingReplyIpAddrType
The address type of destination IP Address
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.69.38.1.1
rcCfmL2IpPingReplyIpAddr
Destination IP Address. Support ipv4 at this time
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.69.38.1.2
rcCfmL2IpPingReplySendOrder
An index to distinguish among multiple L2Ping sessions
This value is assigned sequentially from 1. It denotes
order that sessions were sent. It correlates to the number
of paths found and stored in the rcCfmTransmitL2I…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.3
rcCfmL2IpPingReplyVrfId
VRF ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.4
rcCfmL2IpPingReplyVlanId
Vlan found from L3 lookup and used for transmission
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.69.38.1.5
rcCfmL2IpPingReplyDestMacAddress
An indication of the target MAC Address transmitted
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.38.1.6
rcCfmL2IpPingReplyPortNum
Either the value '0', or the port number of the
port used for the l2ping.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.69.38.1.7
rcCfmL2IpPingReplyDestHostName
The host name of the responding node
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.38.1.8
rcCfmL2IpPingReplySize
The number of bytes of data sent
Integer32
Constraints:
range: 0-9600
 .1.3.6.1.4.1.2272.1.69.38.1.9
rcCfmL2IpPingReplyPktsTx
Number of Packets transmitted for this vlan/mac
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.10
rcCfmL2IpPingReplyPktsRx
Number of Packets received for this vlan/mac
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.11
rcCfmL2IpPingReplyPercentLossWhole
Percentage of packet loss for this vlan/mac
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2272.1.69.38.1.12
rcCfmL2IpPingReplyPercentLossFract
Percentage of packet loss for this vlan/mac
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2272.1.69.38.1.13
rcCfmL2IpPingReplyMinRoundTrip
Min time for round-trip for this vlan/mac in us
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.14
rcCfmL2IpPingReplyMaxRoundTrip
Max time for round-trip for this vlan/mac in us
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.15
rcCfmL2IpPingReplyRttAvgWhole
Average time for round-trip for this vlan/mac in us
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.16
rcCfmL2IpPingReplyRttAvgFract
Fractional portion of Average time for round-trip
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.38.1.17
rcCfmL2IpPingReplyFlag
Result flag indicating status or error code.
Each enum value represents a status or error case.
1 - No error
2 - Internal Error
3 - Invalid Ip
4 - L2Trace completed
5 - Lookup failure for IP (no vlan/mac entries)
Enumeration
Enumerated Values:
1none
2internalError
3invalidMac
4mepDisabled
5invalidMD
6invalidMA
7noMepFound
8unknownServiceInstance
9l2PingToOwnMepMac
10l2PingComplete
 .1.3.6.1.4.1.2272.1.69.38.1.18

rcCfmTransmitL2IpTraceTable

table
.1.3.6.1.4.1.2272.1.69.39 · 1 row entry · 9 columns
Open in standard view 
Connectivity Fault Management transmit L2IpTrace table
rcCfmTransmitL2IpTraceEntry entry .1.3.6.1.4.1.2272.1.69.39.1
L2IpTrace entry.
Indexes
rcCfmTransmitL2IpTraceIpAddrType rcCfmTransmitL2IpTraceIpAddr
Column Syntax OID
rcCfmTransmitL2IpTraceIpAddrType
The address type of destination IP Address
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.69.39.1.1
rcCfmTransmitL2IpTraceIpAddr
Destination IP Address. Support ipv4 at this time
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.69.39.1.2
rcCfmTransmitL2IpTraceVrfId
VRF ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.39.1.3
rcCfmTransmitL2IpTraceVrfName
The Name of the Virtual Router
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.69.39.1.4
rcCfmTransmitL2IpTraceTtl
The number of hops remaining to this L2Trace.
Decremented by 1 by each Bridge that handles the L2Trace.
The decremented value is returned in the L2Trace. If 0
on output, the L2Trace is not transmitted to the next
ho…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.39.1.5
rcCfmTransmitL2IpTraceStatus
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to
transmit, the L2Trace messages.
-abort The service is aborted or a…
Enumerationr/w
Enumerated Values:
1ready
2transmit
3abort
 .1.3.6.1.4.1.2272.1.69.39.1.6
rcCfmTransmitL2IpTraceResultOk
Indicates the result of the operation:
-true. The Trace Message(s) will be/have been sent.
-false. The Trace Message(s) will not be sent.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.69.39.1.7
rcCfmTransmitL2IpTracePathsFound
The number of paths found to execute l2trace command
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.39.1.8
rcCfmTransmitL2IpTraceRowStatus
Used to create/delete entries in the
rcCfmTransmitL2IpTraceTable. Deletion of an entry
in this table results in corresponding
rcCfmL2IpTraceReplyTable entries being deleted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.69.39.1.9

rcCfmL2IpTraceReplyTable

table
.1.3.6.1.4.1.2272.1.69.40 · 1 row entry · 16 columns
Open in standard view 
This table contains a list of l2 ip trace replies received 
by a specific MEP in response to a linktrace message.
rcCfmL2IpTraceReplyEntry entry .1.3.6.1.4.1.2272.1.69.40.1
The L2 Ip Trace Reply table entry.
Indexes
rcCfmL2IpTraceReplyIpAddrType rcCfmL2IpTraceReplyIpAddr rcCfmL2IpTraceReplySendOrder rcCfmL2IpTraceReplyHop rcCfmL2IpTraceReplyReceiveOrder
Column Syntax OID
rcCfmL2IpTraceReplyIpAddrType
The address type of destination IP Address
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.69.40.1.1
rcCfmL2IpTraceReplyIpAddr
Destination IP Address. Support ipv4 at this time
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.69.40.1.2
rcCfmL2IpTraceReplySendOrder
An index to distinguish among multiple L2Trace sessions
This value is assigned sequentially from 1. It denotes
order that sessions were sent. It correlates to the number
of paths found and stored in the rcCfmTransmitL2…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.40.1.3
rcCfmL2IpTraceReplyHop
The number of L2 hops away from L2Trace initiator.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.40.1.4
rcCfmL2IpTraceReplyReceiveOrder
An index to distinguish among multiple L2Trace responses
with the same Send Transaction Identifier field value.
This value is assigned sequentially from 1, in the order
that the Linktrace Initiator received the resp…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.40.1.5
rcCfmL2IpTraceReplyTtl
Ttl field value for a returned L2Trace response.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.40.1.6
rcCfmL2IpTraceReplyVrfId
VRF ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.69.40.1.7
rcCfmL2IpTraceReplyVlanId
Vlan found from L3 lookup and used for transmission
Integer32
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.69.40.1.8
rcCfmL2IpTraceReplyDestMacAddress
An indication of the target MAC Address transmitted
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.40.1.9
rcCfmL2IpTraceReplySeqNumber
The transaction identifier/sequence number used in
linktrace message packet
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.69.40.1.10
rcCfmL2IpTraceReplyPortNum
Either the value '0', or the port number of the
port used for the l2trace.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.69.40.1.11
rcCfmL2IpTraceReplySrcMac
Mac address of the MP that responded to L2Trace request for
this L2traceReply
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.40.1.12
rcCfmL2IpTraceReplyHostName
The host name of the replying node
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.40.1.13
rcCfmL2IpTraceReplyLastSrcMac
The MAC address of the node that forwarded the
L2Trace to the responding node
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.69.40.1.14
rcCfmL2IpTraceReplyLastHostName
The host name of the node that forwarded the L2Trace
to the responding node
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.69.40.1.15
rcCfmL2IpTraceReplyFlag
L2Trace result flag indicating status or error code.
Each enum value represents a status or error case.
1 - No error
2 - L2Trace Internal Error
3 - Invalid Mac Address
4 - Mep must be enabled in order to perform L2…
Enumeration
Enumerated Values:
1none
2internalError
3invalidMac
4mepDisabled
5noL2TraceResponse
6l2TraceToOwnMepMac
7l2TraceComplete
8l2TraceLookupFailure
 .1.3.6.1.4.1.2272.1.69.40.1.16

rcPlugOptModTable

table
.1.3.6.1.4.1.2272.1.71.1 · 1 row entry · 58 columns
Open in standard view 
Gibc SFF diagnostic info table
rcPlugOptModEntry entry .1.3.6.1.4.1.2272.1.71.1.1
Entry containing info. for a particular port
Indexes
rcPlugOptModPortIndex
Column Syntax OID
rcPlugOptModPortIndex
An index value that uniquely identifies a port on a
blade or line-card.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.71.1.1.1
rcPlugOptModDdmStatusMask
Each bit other than ddm-ok represents a specific error.
Any combination of error bits is allowed.
Bits
Enumerated Values:
0ddm-ok
1ddm-checksum-error
2ddm-i2c-read-error
3ddm-threshold-error
4ddm-calibration-error
 .1.3.6.1.4.1.2272.1.71.1.1.2
rcPlugOptModCalibration
The identifier value indicates type of calibration.
Enumeration
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.2272.1.71.1.1.3
rcPlugOptModPowerMeasure
The identifier value indicates type of external power.
Enumeration
Enumerated Values:
1omi
2average
 .1.3.6.1.4.1.2272.1.71.1.1.4
rcPlugOptModConnectorType
The connector type is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. This is an assigned
name that indicates some characteristic of the
layer-1 interface.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2272.1.71.1.1.5
rcPlugOptModVendorName
The vendor name is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. The vendor name
shall be the full name of the corporation, a
commonly accepted abbreviation…
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2272.1.71.1.1.6
rcPlugOptModVendorPartNumber
The vendor part number is a 16 byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the vendor
part number or product name.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2272.1.71.1.1.7
rcPlugOptModVendorRevNumber
The vendor revision number is a 4-byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the
vendor product revision number.
OctetString
Constraints:
range: 5-5
 .1.3.6.1.4.1.2272.1.71.1.1.8
rcPlugOptModVendorSN
The vendor serial number is a 16 character field
that contains ASCII characters, left-aligned and
padded on the right with ASCII spaces, defining
the vendor serial number for the transceiver.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2272.1.71.1.1.9
rcPlugOptModVendorDateCode
The date code is an 8-byte field that contains the
vendor's date code in ASCII. This field is
mandatory and takes the form: YYMMDDLC where
YY is the 2 low order digits of the year (00=2000),
MM is the month, 01 thru 12,…
OctetString
Constraints:
range: 9-9
 .1.3.6.1.4.1.2272.1.71.1.1.10
rcPlugOptModPEC
This is a 16 byte left-justified ASCII field that
records the Nortel Product Equipment Code order
number for the module. Nortel part numbers are 9
bytes long, so the 10th through 16th byte should
be NULL.
OctetString
Constraints:
range: 17-17
 .1.3.6.1.4.1.2272.1.71.1.1.11
rcPlugOptModCLEI
This is a 10 byte left-justified ASCII field that
records the Nortel supplied Common Language
Equipment Identifier code for the device. The CLEI
code is a Telcordia human-readable representation
of the 1D barcode.
OctetString
Constraints:
range: 11-11
 .1.3.6.1.4.1.2272.1.71.1.1.12
rcPlugOptModSupportsDDM
This boolean indicates whether or not the device
supports the DDM capability.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.71.1.1.13
rcPlugOptModAux1Monitoring
This value tells what Aux1 is measuring.The values are
as follows:

0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TEC Current (mA)
4 Laser Temperature
5 L…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.14
rcPlugOptModAux2Monitoring
This value tells you what AUX2 is measuring.The values are
as follows:

0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TEC Current (mA)
4 Laser Temperature
…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.15
rcPlugOptModWaveLength
Nominal transmitter output wavelength at room
temperature. It is expressed in nano-meters.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.71.1.1.16
rcPlugOptModTemperature
This value represents the internally measured
module temperature. It is expressed in units of
1/256 of a degree Celsius and can range from -40C
to +125C with 0.0001 accuracy.The most significant byte is
the signed inte…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.17
rcPlugOptModTemperatureHighAlarmThreshold
This value represents the vendor specified high
temperature threshold. If the device
temperature exceeds this value, a temperature high
is asserted. It is expressed in the same
units as the measured temperature.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.18
rcPlugOptModTemperatureLowAlarmThreshold
This value represents the vendor specified low
temperature threshold. If the device
temperature falls below this value, a temperature
low is asserted. It is expressed in the same
units as the measured temperature.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.19
rcPlugOptModTemperatureHighWarningThreshold
This value represents the vendor specified high
temperature warning threshold. If the device
temperature exceeds this value, a temperature high
warning is asserted. It is expressed in the same
units as the measured temp…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.20
rcPlugOptModTemperatureLowWarningThreshold
This value represents the vendor specified low
temperature warning threshold. If the device
temperature falls below this value, a temperature
low warning is asserted. It is expressed in the
same units as the measured te…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.21
rcPlugOptModVoltage
This value represents the internally measured
supply voltage. It is a positive number expressed
in microvolts and can range from 0 to 65535 mV.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.22
rcPlugOptModVoltageHighAlarmThreshold
This value represents the vendor specified high
voltage threshold. If the measured voltage exceeds
this value, a high voltage is asserted. It
is a positive number expressed in microvolts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.23
rcPlugOptModVoltageLowAlarmThreshold
This value represents the vendor specified low
voltage threshold. If the measured voltage falls
below this value, a low voltage is asserted.
It is a positive number expressed in microvolts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.24
rcPlugOptModVoltageHighWarningThreshold
This value represents the vendor specified high
voltage warning threshold. If the measured voltage
exceeds this value, a high voltage warning is
asserted. It is a positive number expressed in
microvolts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.25
rcPlugOptModVoltageLowWarningThreshold
This value represents the vendor specified low
voltage warning threshold. If the measured voltage
falls below this value, a low voltage warning is
asserted. It is a positive number expressed in
microvolts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.26
rcPlugOptModBias
This value represents the internally measured
transmitter laser bias current. It is a positive
number expressed in units of 2 microamps and can
range from 0 to 131 mA with 0.0001 accuracy.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.27
rcPlugOptModBiasHighAlarmThreshold
This value represents the vendor specified high
current threshold. If the measured bias
current exceeds this value, a high current alarm
is asserted. It is a positive number expressed
in units of 2 microamps and can ran…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.28
rcPlugOptModBiasLowAlarmThreshold
This value represents the vendor specified low
current threshold. If the measured bias
current falls below this value, a low current
is asserted. It is a positive number
expressed in units of 2 microamps and can range
f…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.29
rcPlugOptModBiasHighWarningThreshold
This value represents the vendor specified high
current warning threshold. If the measured bias
current exceeds this value, a high current warning
is asserted. It is a positive number expressed in
units of 2 microamps a…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.30
rcPlugOptModBiasLowWarningThreshold
This value represents the vendor specified low
current warning threshold. If the measured bias
current falls below this value, a low current
warning is asserted. It is a positive number
expressed in units of 2 microamps…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.31
rcPlugOptModTxPower
This value represents the internally measured
coupled TX output power. It is a positive number
expressed in units of micro watts and can range
from 0 to 65.535 mW (-40 to 18.16 dBm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.32
rcPlugOptModTxPowerHighAlarmThreshold
This value represents the vendor specified high
transmit power threshold. If the measured
transmitter power exceeds this value, a
transmitter power high is asserted. It is
a positive number expressed in units of micro
w…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.33
rcPlugOptModTxPowerLowAlarmThreshold
This value represents the vendor specified low
transmit power threshold. If the measured
transmitter power falls below this value, a
transmitter power low is asserted. It is a
positive number expressed in units of micro…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.34
rcPlugOptModTxPowerHighWarningThreshold
This value represents the vendor specified high
transmit power warning threshold. If the measured
transmitter power exceeds this value, a
transmitter power high warning is asserted. It is
a positive number expressed in …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.35
rcPlugOptModTxPowerLowWarningThreshold
This value represents the vendor specified low
transmit power warning threshold. If the measured
transmitter power falls below this value, a
transmitter power low warning is asserted. It is
a positive number expressed i…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.36
rcPlugOptModRxPower
This value represents the internally measured
received power. It is a positive number expressed
in units of micro watts and can range from 0 to
65.535 mW (-40 to 18.16 dBm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.37
rcPlugOptModRxPowerHighAlarmThreshold
This value represents the vendor specified high
receiver power threshold. If the measured
received power exceeds this value, a receiver
power high is asserted. It is a positive
number expressed in units of micro watts a…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.38
rcPlugOptModRxPowerLowAlarmThreshold
This value represents the vendor specified low
receiver power threshold. If the measured
received power falls below this value, a receiver
power low is asserted. It is a positive
number expressed in units of micro watts…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.39
rcPlugOptModRxPowerHighWarningThreshold
This value represents the vendor specified high
receiver power warning threshold. If the measured
received power exceeds this value, a receiver
power high warning is asserted. It is a positive
number expressed in units …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.40
rcPlugOptModRxPowerLowWarningThreshold
This value represents the vendor specified low
receiver power warning threshold. If the measured
received power falls below this value, a receiver
power low warning is asserted. It is a positive
number expressed in unit…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.41
rcPlugOptModAux1
This represents the internally measured A/D
value specified.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.42
rcPlugOptModAux1HighAlarmThreshold
This value represents the vendor specified high
Aux1 threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.43
rcPlugOptModAux1LowAlarmThreshold
This value represents the vendor specified low
Aux1 threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.44
rcPlugOptModAux1HighWarningThreshold
This value represents the vendor specified high
Aux1 warning threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.45
rcPlugOptModAux1LowWarningThreshold
This value represents the vendor specified low
Aux1 warning threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.46
rcPlugOptModAux2
This represents the internally measured A/D
value specified.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.47
rcPlugOptModAux2HighAlarmThreshold
This value represents the vendor specified high
Aux1 threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.48
rcPlugOptModAux2LowAlarmThreshold
This value represents the vendor specified low
Aux1 threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.49
rcPlugOptModAux2HighWarningThreshold
This value represents the vendor specified high
Aux1 warning threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.50
rcPlugOptModAux2LowWarningThreshold
This value represents the vendor specified low
Aux1 warning threshold.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.71.1.1.51
rcPlugOptModTemperatureStatus
Used to indicate the current temperature status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.52
rcPlugOptModVoltageStatus
Used to indicate the current voltage status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.53
rcPlugOptModBiasStatus
Used to indicate the current laser bias status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.54
rcPlugOptModTxPowerStatus
Used to indicate the current transmitter power
status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.55
rcPlugOptModRxPowerStatus
Used to indicate the current receiver power status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.56
rcPlugOptModAux1Status
Used to indicate the current Aux1 status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.57
rcPlugOptModAux2Status
Used to indicate the current Aux2 status
Enumeration
Enumerated Values:
1normal
2highWarning
3highAlarm
4lowWarning
5lowAlarm
 .1.3.6.1.4.1.2272.1.71.1.1.58

rcVrrpOperTable

table
.1.3.6.1.4.1.2272.1.73.1.1.2 · 1 row entry · 26 columns
Open in standard view 
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'rcVrrpOperEntry' items.
rcVrrpOperEntry entry .1.3.6.1.4.1.2272.1.73.1.1.2.1
An entry in the rcVrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Indexes
rcVrrpOperIfIndex rcVrrpOperVrId
Column Syntax OID
rcVrrpOperIfIndex
port interface index.
InterfaceIndexOrZero
Textual Convention: InterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.1
rcVrrpOperVrId
This object contains the Virtual Router Identifier (VRID).
VRRP-MIBVrId
Textual Convention: VRRP-MIBVrId Integer32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.2
rcVrrpOperIpAddr
The assigned IP addresses that a virtual router is responsible
for backing up.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.3
rcVrrpOperVirtualMacAddr
The virtual MAC address of the virtual router. This is derived
as follows: 00-00-5E-00-01-<VRID>.

Where the first three octets consist of the IANA's OUI; The
next two octets indicate the address block of …
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.4
rcVrrpOperState
The current state of the virtual router.
Enumeration
Enumerated Values:
1initialize
2backup
3master
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.5
rcVrrpOperControl
This object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the value to 'disabled', will tranisition the
ro…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.6
rcVrrpOperPriority
This object specifies the priority for the virtual
router (e.g., master election) with respect to other
virtual routers that are backing up a one or more
associated IP addresses. Higher values imply higher
priority.
…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.7
rcVrrpOperIpAddrCount
The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/VRID pair.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.8
rcVrrpOperMasterIpAddr
The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.9
rcVrrpOperAuthType
Authentication type used for VRRP protocol exchanges between
virtual routers.
Enumerationr/w
Enumerated Values:
1noAuthentication
2simpleTextPassword
3ipAuthenticationHeader
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.10
rcVrrpOperAuthKey
The Authentication Key. If the virtual router's Authorization
Type is 'simpleTextPassword', and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.

When read, r…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.11
rcVrrpOperHMACMD5Key
The Authentication Key. If the virtual router's 'Authorization
Type' is 'ipAuthenticationHeader', and the key length is shorter
than 16 octets, the agent will left adjust and zero fill
to 16 octets.

When…
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.12
rcVrrpOperAdvertisementInterval
This is the time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.13
rcVrrpOperPreemptMode
Controls whether a higher priority virtual router will
preempt a lower priority master.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.14
rcVrrpOperVirtualRouterUpTime
This is the time interval (in hundredths of a second)
since this virtual router was initialized.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.15
rcVrrpOperRowStatus
The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to 'createAndGo' results in enabling the VRRP
protocol for this virtual router. The information re…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.16
rcVrrpOperCriticalIpAddr
IP address of the interface that will cause a
shutdown event.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.17
rcVrrpOperHoldDownTimer
Used to configure the amount of time (in seconds)
to wait before preempting the current vrrp master.
Integer32r/w
Constraints:
range: 0-21600
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.18
rcVrrpOperHoldDownState
Used to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise.
Enumeration
Enumerated Values:
1dormant
2active
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.19
rcVrrpOperHoldDownTimeRemaining
Used to indicate the amount of time (in seconds)
left before the rcVrrpOperHoldDownTimer will expire.
Integer32
Constraints:
range: 0-21600
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.20
rcVrrpOperAction
Used to trigger an action on this vrrp interface.
Enumerationr/w
Enumerated Values:
1none
2preemptHoldDownTimer
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.21
rcVrrpOperCriticalIpAddrEnable
Indicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (0.0.0.0).
No effect if an user-defined IP address does not exist.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.22
rcVrrpOperBackUpMaster
Enable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the time of SMLT.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.23
rcVrrpOperBackUpMasterState
Indicate whether backup VRRP switch traffic forwarding is enabled or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.24
rcVrrpOperFasterAdvInterval
This is the faster advertisement interval, in
milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of th…
Integer32r/w
Constraints:
range: 200-1000
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.25
rcVrrpOperFasterAdvIntervalEnable
Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.73.1.1.2.1.26

rcVrrpRouterStatsTable

table
.1.3.6.1.4.1.2272.1.73.1.1.3 · 1 row entry · 14 columns
Open in standard view 
Table of virtual router statistics.
rcVrrpRouterStatsEntry entry .1.3.6.1.4.1.2272.1.73.1.1.3.1
An entry in the table, containing statistics information
about a given virtual router.
Indexes
No indexes recorded
Column Syntax OID
rcVrrpStatsIfIndex
port interface index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.1
rcVrrpStatsVrId
This object contains the Virtual Router Identifier (VRID).
VRRP-MIBVrId
Textual Convention: VRRP-MIBVrId Integer32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.2
rcVrrpStatsBecomeMaster
The total number of times that this virtual router's state
has transitioned from BACKUP to MASTER.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.3
rcVrrpStatsAdvertiseRcvd
The total number of VRRP advertisements received by this
virtual router.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.4
rcVrrpStatsAdvertiseIntervalErrors
The total number of VRRP advertisement packets received
for which the advertisement interval is different than the
one configured for the local virtual router.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.5
rcVrrpStatsPasswdSecurityViolations
The total number of VRRP packets received that do not pass
the simple text password authentification check.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.6
rcVrrpStatsHmacSecurityViolations
The total number of VRRP packets received that do not pass
the HMAC-MD5-96 authentification check.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.7
rcVrrpStatsIpTtlErrors
The total number of VRRP packets received by the virtual
router with IP TTL (Time-To-Live) not equal to 255.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.8
rcVrrpStatsPriorityZeroPktsRcvd
The total number of VRRP packets received by the virtual
router with a priority of '0'.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.9
rcVrrpStatsPriorityZeroPktsSent
The total number of VRRP packets sent by the virtual router
with a priority of '0'.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.10
rcVrrpStatsInvalidTypePktsRcvd
The number of VRRP packets received by the virtual router
with an invalid value in the 'type' field.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.11
rcVrrpStatsAddressListErrors
Packets received address list the address list does not
match the locally configured list for the virtual router.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.12
rcVrrpStatsUnknownAuthType
Packets received with an unknown authentication type.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.13
rcVrrpStatsAuthTypeErrors
Packets received with 'Auth Type' not equal to the locally
configured authentication method ('vrrpOperAuthType').
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.73.1.1.3.1.14

rcMplsIpStaticFecTable

table
.1.3.6.1.4.1.2272.1.74.1.1.1.2 · 1 row entry · 8 columns
Open in standard view 
This is the table of ip-static fec mappings for both
RSVP and LDP .
rcMplsIpStaticFecEntry entry .1.3.6.1.4.1.2272.1.74.1.1.1.2.1
A static fec mapping to an rsvp lsp or ldp egress IP address.
Indexes
rcMplsIpStaticFecDest rcMplsIpStaticFecMask
Column Syntax OID
rcMplsIpStaticFecDest
The statically-configured destination IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1
rcMplsIpStaticFecMask
The statically-configured destination IP mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2
rcMplsIpStaticFecTunnelName
The rsvp lsp tunnel name associated with
rcMplsIpStaticFecTunnelId. This field will be
null if the value of rcMplsIpStaticFecTunnelId is 0.
OctetStringr/w
Constraints:
range: 0-33
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3
rcMplsIpStaticFecTunnelId
The rsvp lsp tunnel index (from mplsTunnelTable
defined in rfc3812) if this is an rsvp Ip statically
mapped address. This field will be 0 if this is an
LDP Egress Address mapping.
MPLS-TC-STD-MIBMplsTunnelIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4
rcMplsIpStaticFecEgressAddr
The LDP Egress IP Address.
This field will be 0 if this is an rsvp
tunnel fec mapping.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5
rcMplsIpStaticFecEgressMask
The LDP Egress IP Mask.
This field will be 0 if this is an rsvp
tunnel fec mapping.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6
rcMplsIpStaticFecState
Indicates the actual operational status of this
static fec.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7
rcMplsIpStaticFecRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8

rcMplsIpFtnTable

table
.1.3.6.1.4.1.2272.1.74.1.1.1.3 · 1 row entry · 6 columns
Open in standard view 
This is the table of mpls Ip FTN.
rcMplsIpFtnEntry entry .1.3.6.1.4.1.2272.1.74.1.1.1.3.1
An mpls FTN entry .
Indexes
rcMplsIpFtnDest rcMplsIpFtnMask
Column Syntax OID
rcMplsIpFtnDest
The FTN destination IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1
rcMplsIpFtnMask
The FTN destination IP mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2
rcMplsIpFtnType
The FTN next hop label type.
Enumeration
Enumerated Values:
1rsvp-static
2ldp-static
3ldp-dynamic
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3
rcMplsIpFtnOutLabel
The FTN outgoing label.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4
rcMplsIpFtnOutIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5
rcMplsIpFtnNextHop
The FTN next hop Ip Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6

rcMplsIpIlmTable

table
.1.3.6.1.4.1.2272.1.74.1.1.1.4 · 1 row entry · 5 columns
Open in standard view 
This is the table of mpls Incoming Label Mapping.
rcMplsIpIlmEntry entry .1.3.6.1.4.1.2272.1.74.1.1.1.4.1
An mpls Incoming Label Map entry .
Indexes
rcMplsIpIlmInLabel
Column Syntax OID
rcMplsIpIlmInLabel
The Incoming Label.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1
rcMplsIpIlmInIfIndex
The index value which uniquely identifies the
incoming interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of …
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2
rcMplsIpIlmOutLabel
The Outgoing Label.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3
rcMplsIpIlmOutIfIndex
The index value which uniquely identifies the
outgoing interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of …
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4
rcMplsIpIlmNextHop
The next hop Ip Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5

rcMplsIngressLspStatTable

table
.1.3.6.1.4.1.2272.1.74.1.1.1.5 · 1 row entry · 3 columns
Open in standard view 
This is the table of mpls Incoming Label Stats.
rcMplsIngressLspStatEntry entry .1.3.6.1.4.1.2272.1.74.1.1.1.5.1
An mpls Incoming Label Stat entry .
Indexes
rcMplsIngressLspPort rcMplsIngressLspLabel
Column Syntax OID
rcMplsIngressLspPort
The incoming port for the lsp.
Integer32
Constraints:
range: 64-687
 .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1
rcMplsIngressLspLabel
The Incoming Lsp Label.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2
rcMplsIngressLspPkts
Count of incoming packets for the corresponding lsp and port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3

rcMplsEgressLspStatTable

table
.1.3.6.1.4.1.2272.1.74.1.1.1.6 · 1 row entry · 3 columns
Open in standard view 
This is the table of mpls OutGoing Label Stats.
rcMplsEgressLspStatEntry entry .1.3.6.1.4.1.2272.1.74.1.1.1.6.1
An mpls OutGoing Label Stat entry .
Indexes
rcMplsEgressLspPort rcMplsEgressLspLabel
Column Syntax OID
rcMplsEgressLspPort
The OutGoing port for the lsp.
Integer32
Constraints:
range: 64-687
 .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1
rcMplsEgressLspLabel
The OutGoing Lsp Label.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2
rcMplsEgressLspPkts
Count of outgoing packets for the corresponding lsp and port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3

rcMplsRsvpTunnelExtTable

table
.1.3.6.1.4.1.2272.1.74.1.1.2.2 · 1 row entry · 24 columns
Open in standard view 
This is the table of mpls rsvp tunnels.  This table 
supplements the mplsTunnelTable from rfc3812.
rcMplsRsvpTunnelExtEntry entry .1.3.6.1.4.1.2272.1.74.1.1.2.2.1
An entry in the mpls tunnel table.
Indexes
rcMplsRsvpTunnelExtIndex rcMplsRsvpTunnelExtInstance rcMplsRsvpTunnelExtIngressLSRId rcMplsRsvpTunnelExtEgressLSRId
Column Syntax OID
rcMplsRsvpTunnelExtIndex
The Tunnel Index. The value of this object
should mimic the value of mplsTunnelIndex of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1
rcMplsRsvpTunnelExtInstance
The Tunnel Instance. The value of this object
should mimic the value of mplsTunnelInstance of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies.
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2
rcMplsRsvpTunnelExtIngressLSRId
The Rsvp Tunnel Ingress LSR Id. The value of
this object should mimic the value of the
mplsTunnelIngressLSRId of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3
rcMplsRsvpTunnelExtEgressLSRId
The Rsvp Tunnel Egress LSR Id. The value of
this object should mimic the value of the
mplsTunnelEgressLSRId of the
MplsTunnelEntry of the mpls tunnel for which
this extended tunnel table entry row applies.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4
rcMplsRsvpTunnelExtName
The Name of the tunnel associated with this LSP.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5
rcMplsRsvpTunnelExtSwitchover
Switch this LSP from active status to inactive
status or vice versa.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6
rcMplsRsvpTunnelExtActiveStatus
This is 'true' if this is the active LSP of the tunnel.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7
rcMplsRsvpTunnelExtResStyle
This is the reservation style of the tunnel.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8
rcMplsRsvpTunnelExtLspId
This is the LSP Id of this LSP.
MPLS-TC-STD-MIBMplsLSPID
Textual Convention: MPLS-TC-STD-MIBMplsLSPID OctetString
Type Constraints:
range: 2
range: 6
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9
rcMplsRsvpTunnelExtERO
This is the Explicit Route associated with this LSP.
OctetString
Constraints:
range: 100-100
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10
rcMplsRsvpTunnelExtRRO
This is the Recorded Route associated with this LSP.
OctetString
Constraints:
range: 100-100
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11
rcMplsRsvpTunnelExtInIfIndex
This is the incoming interface for the LSP. This
applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12
rcMplsRsvpTunnelExtInLabel
This is the incoming Mpls Label. This
applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13
rcMplsRsvpTunnelExtInNeighbor
This address of the previous-hop (upstream)
router. This applies to rows with mplsTunnelRole
set to transit(2) or tail(3).
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14
rcMplsRsvpTunnelExtOutIfIndex
This is the outgoing interface for the LSP. This
applies to rows with mplsTunnelRole set to
head(1) or transit(2).
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15
rcMplsRsvpTunnelExtOutLabel
This is the outgoing Mpls Label. This
applies to rows with mplsTunnelRole set to
head(1) or transit(2).
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16
rcMplsRsvpTunnelExtOutNeighbor
This address of the next-hop (downstream)
router. This applies to rows with
applies to rows with mplsTunnelRole set to
head(1) or transit(2).
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17
rcMplsRsvpTunnelExtTSpecRate
This is the primary LSP TSpec Rate.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18
rcMplsRsvpTunnelExtTSpecSize
This is the primary LSP TSpec Size.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19
rcMplsRsvpTunnelExtTSpecPeak
This is the primary LSP TSpec Peak.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20
rcMplsRsvpTunnelExtTSpecMin
This is the primary LSP TSpec Min.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21
rcMplsRsvpTunnelExtTSpecMax
This is the primary lsp TSpec Max.
This applies to rows with mplsTunnelRole set to
transit(2) or tail(3).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22
rcMplsRsvpTunnelExtInstanceUpTime
This is the time (in 100ths of a second)
that this instance has been in the Oper 'Up'
state. When the instance transitions out of
the Oper 'Up' state the time is reset to
zero.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23
rcMplsRsvpTunnelExtLSPUpTime
This is the time (in 100ths of a second)
that all instances of this LSP have been in
the Oper Up state. The time is calculated
based on the create time of the first instance
of the LSP to go to the Oper 'Up' state. W…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24

rcMplsRsvpNeighborTable

table
.1.3.6.1.4.1.2272.1.74.1.1.2.3 · 1 row entry · 12 columns
Open in standard view 
This is the table of mpls rsvp neighbors.
rcMplsRsvpNeighborEntry entry .1.3.6.1.4.1.2272.1.74.1.1.2.3.1
An entry in the mpls rsvp tunnel table.
Indexes
rcMplsRsvpNeighborAddress
Column Syntax OID
rcMplsRsvpNeighborAddress
This is the address of a learned neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1
rcMplsRsvpNeighborHelloState
This is the state of hello exchange with
the neighbor.
OctetString
Constraints:
range: 20-20
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2
rcMplsRsvpNeighborIfIndex
This is the interface index of the neighbor.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3
rcMplsRsvpNeighborTime
This is the time the neighbor was learned.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4
rcMplsRsvpNeighborPeriod
This is the RSVP Hello Interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5
rcMplsRsvpNeighborSendCnt
This is the number of Hello packets sent
to the neighbor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6
rcMplsRsvpNeighborRcvCnt
This is the number of Hellp packets received
from the neighbor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7
rcMplsRsvpNeighborLocalInstance
This is the identification sent to the remote
router during Hello message exchange.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8
rcMplsRsvpNeighborRemoteInstance
This is the identification provided by the
remote router during Hello message exchange.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9
rcMplsRsvpNeighborCreationTime
This is the time the neighbor instance was created.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10
rcMplsRsvpNeighborLastPktRxTime
This is the time that the last Hello message
was received from the remote router.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11
rcMplsRsvpNeighborRefReduction
This is the refresh-reduction status between the
local router and the neighbor.
OctetString
Constraints:
range: 50-50
 .1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12

rcMplsRsvpInterfaceTable

table
.1.3.6.1.4.1.2272.1.74.1.1.2.4 · 1 row entry · 7 columns
Open in standard view 
This is the table of mpls rsvp interfaces.
rcMplsRsvpInterfaceEntry entry .1.3.6.1.4.1.2272.1.74.1.1.2.4.1
An entry in the mpls rsvp interface table.
Indexes
rcMplsRsvpInterfaceIfIndex
Column Syntax OID
rcMplsRsvpInterfaceIfIndex
This is the interface index.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1
rcMplsRsvpInterfaceAddress
This is the address of the interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2
rcMplsRsvpInterfaceRefreshInterval
This is the RSVP refresh interval for the
interface(seconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3
rcMplsRsvpInterfaceRefreshMult
This is the configured RSVP refresh
multiplier for the interface(seconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4
rcMplsRsvpInterfaceHelloInterval
This is the configured RSVP Hello Interval
of the interface (seconds).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5
rcMplsRsvpInterfaceRefreshReduction
This is the configured RSVP refresh reduction
support on the interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6
rcMplsRsvpInterfaceMessageBundling
This indicates state of message bundling on the interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7

rcMplsRsvpStatsTable

table
.1.3.6.1.4.1.2272.1.74.1.1.2.5 · 1 row entry · 30 columns
Open in standard view 
This is the table of mpls rsvp statistics.
rcMplsRsvpStatsEntry entry .1.3.6.1.4.1.2272.1.74.1.1.2.5.1
An entry in the mpls rsvp statistics table.
Indexes
rcMplsRsvpStatsIfIndex
Column Syntax OID
rcMplsRsvpStatsIfIndex
This is the interface index. This value can be 0 or
a valid interface index. When 0 the global rsvp
statistics are retrieved.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1
rcMplsRsvpStatsPathRcv
This is the path received count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2
rcMplsRsvpStatsPathSent
This is the path sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3
rcMplsRsvpStatsPathErrRcv
This is the path error receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4
rcMplsRsvpStatsPathErrSent
This is the path error sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5
rcMplsRsvpStatsPathTearRcv
This is the path tear receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6
rcMplsRsvpStatsPathTearSent
This is the path tear sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7
rcMplsRsvpStatsResvRcv
This is the reservation received count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8
rcMplsRsvpStatsResvSent
This is the reservation sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9
rcMplsRsvpStatsResvErrRcv
This is the reservation error receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10
rcMplsRsvpStatsResvErrSent
This is the reservation error sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11
rcMplsRsvpStatsResvTearRcv
This is the resv tear receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12
rcMplsRsvpStatsResvTearSent
This is the resv tear sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13
rcMplsRsvpStatsConfTearRcv
This is the conf tear receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14
rcMplsRsvpStatsConfTearSent
This is the conf tear sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15
rcMplsRsvpStatsAckRcv
This is the acks receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16
rcMplsRsvpStatsAckSent
This is the acks sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17
rcMplsRsvpStatsSRefreshRcv
This is the summary refresh receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18
rcMplsRsvpStatsSRefreshSent
This is the summary refresh sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19
rcMplsRsvpStatsHelloReqRcv
This is the hello request receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20
rcMplsRsvpStatsHelloReqSent
This is the hello request sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21
rcMplsRsvpStatsHelloAckRcv
This is the hello ack receives count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22
rcMplsRsvpStatsHelloAckSent
This is the hello ack sent count.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23
rcMplsRsvpStatsBadIpHdr
This is the count of pkts with bad IP Header.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24
rcMplsRsvpStatsBadVersion
This is the count of pkts with Bad Version.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25
rcMplsRsvpStatsBadRsvpLen
This is the count of pkts with Bad Rsvp length.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26
rcMplsRsvpStatsBadCksum
This is the count of pkts with Bad Checksum.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27
rcMplsRsvpStatsBadMsgType
This is the count of pkts with Bad Message type.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28
rcMplsRsvpStatsBadMsgForm
This is the count of pkts with Bad Message Form.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29
rcMplsRsvpStatsBadIntf
This is the count of pkts received on a
Bad Interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30

rcMplsLdpDiscoveryTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.2 · 1 row entry · 6 columns
Open in standard view 
This is the table of mpls ldp discoveries.
rcMplsLdpDiscoveryEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.2.1
An entry in the mpls ldp discovery table.
Indexes
rcMplsLdpDiscoveryIfIndex rcMplsLdpDiscoveryPeerLdpId
Column Syntax OID
rcMplsLdpDiscoveryIfIndex
This is the interface index.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1
rcMplsLdpDiscoveryPeerLdpId
This is the peer ldp id.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2
rcMplsLdpDiscoveryPeerTransportAddr
This is the peer transport address to which
an LDP session has been provisioned.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3
rcMplsLdpDiscoveryNegotiatedHoldTime
This is the hold time negotiated between peers.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4
rcMplsLdpDiscoveryConfSeqNum
This is the configured sequence number sent
by the peer.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5
rcMplsLdpDiscoveryExtendedDiscovery
If set to 1, extended discovery is enabled.
If set to 0, basic discovery is enabled.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6

rcMplsLdpPathTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.3 · 1 row entry · 5 columns
Open in standard view 
This is the table of mpls LDP Paths between
a local peer and a remote peer.
rcMplsLdpPathEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.3.1
An entry in the mpls ldp path table.
Indexes
rcMplsLdpPathType rcMplsLdpPathAddrType rcMplsLdpPathAddrPrefixLength rcMplsLdpPathAddr
Column Syntax OID
rcMplsLdpPathType
This is the path type.

ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.
Enumeration
Enumerated Values:
0none
1host
2prefix
3vc
4vcgenid
 .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1
rcMplsLdpPathAddrType
This is the path address type.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2
rcMplsLdpPathAddrPrefixLength
This is the path address prefix length.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3
rcMplsLdpPathAddr
This is the path address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4
rcMplsLdpPathInLabel
This is the path address prefix length.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5

rcMplsLdpPathRemotePeerTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.4 · 1 row entry · 8 columns
Open in standard view 
This is the table of LDP paths to a given
remote peer.
rcMplsLdpPathRemotePeerEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.4.1
An entry in the mpls ldp path remote
peer table.
Indexes
rcMplsLdpPathRemotePeerType rcMplsLdpPathRemotePeerAddrType rcMplsLdpPathRemotePeerAddrPrefixLength rcMplsLdpPathRemotePeerAddr rcMplsLdpPathRemotePeerId
Column Syntax OID
rcMplsLdpPathRemotePeerType
This is the path type.
ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.
Enumeration
Enumerated Values:
0none
1host
2prefix
3vc
4vcgenid
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1
rcMplsLdpPathRemotePeerAddrType
This is the type of the path address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2
rcMplsLdpPathRemotePeerAddrPrefixLength
This is the path address prefix length.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3
rcMplsLdpPathRemotePeerAddr
This is the path address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4
rcMplsLdpPathRemotePeerId
This is the Id of the remote peer of the path.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5
rcMplsLdpPathRemotePeerLdpId
This is the LDP Id of the remote peer of the path.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6
rcMplsLdpPathRemotePeerOutLabel
This is the Out Label for this instance
of the Remote Peer Id.
MPLS-TC-STD-MIBMplsLabel
Textual Convention: MPLS-TC-STD-MIBMplsLabel Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7
rcMplsLdpPathRemotePeerState
This is the state of the remote peer.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8

rcMplsLdpRouteTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.5 · 1 row entry · 7 columns
Open in standard view 
This is the table of mpls ldp routes.
rcMplsLdpRouteEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.5.1
An entry in the mpls ldp route table.
Indexes
rcMplsLdpRouteType rcMplsLdpRouteAddrType rcMplsLdpRouteAddrPrefixLength rcMplsLdpRouteAddr
Column Syntax OID
rcMplsLdpRouteType
This is the route type.
----------------------
ATG_NHR_LDP_FEC_TYPE_NONE 0
ATG_NHR_LDP_FEC_TYPE_HOST 1
ATG_NHR_LDP_FEC_TYPE_PREFIX 2
ATG_NHR_LDP_FEC_TYPE_VC 3
ATG_NHR_LDP_FEC_TYPE_VC_GEN_ID 4.
Enumeration
Enumerated Values:
0none
1host
2prefix
3vc
4vcgenid
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1
rcMplsLdpRouteAddrType
This is the route address prefix length.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2
rcMplsLdpRouteAddrPrefixLength
This is the route address prefix length.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3
rcMplsLdpRouteAddr
This is the route address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4
rcMplsLdpRouteIfIndex
This is the interface index of the route entry.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5
rcMplsLdpRouteNextHopAddrType
This is the address type of the next hop.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6
rcMplsLdpRouteNextHopAddr
This is the address of the next hop.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7

rcMplsLdpSessionTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.6 · 1 row entry · 15 columns
Open in standard view 
This is the table of mpls ldp sessions.
rcMplsLdpSessionEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.6.1
An entry in the mpls ldp session table.
Indexes
rcMplsLdpSessionEntityLdpId rcMplsLdpSessionEntityIndex rcMplsLdpSessionPeerLdpId
Column Syntax OID
rcMplsLdpSessionEntityLdpId
This is the entity LDP ID for the session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1
rcMplsLdpSessionEntityIndex
This is the entity LDP ID for the session.
DIFFSERV-MIBIndexInteger
Textual Convention: DIFFSERV-MIBIndexInteger Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2
rcMplsLdpSessionPeerLdpId
This is the peer LDP ID for the session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLdpIdentifier OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3
rcMplsLdpSessionStateLastChange
The time this Session entered its current state
as denoted by the rcMplsLdpSessionState object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4
rcMplsLdpSessionState
The current state of the session, all of the
states 1 to 5 are based on the state machine
for session negotiation behavior
1- nonexistent, 2- initialized, 3- openrec, 4- opensent, 5- operational.
Enumeration
Enumerated Values:
1nonexistent
2initialized
3openrec
4opensent
5operational
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5
rcMplsLdpSessionRole
During session establishment the LSR/LER takes either
the active role or the passive role based on address
comparisons. This object indicates whether this LSR/LER
was behaving in an active role or passive role during
t…
Enumeration
Enumerated Values:
1unknown
2active
3passive
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6
rcMplsLdpSessionProtocolVersion
This is the protocol version.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7
rcMplsLdpSessionKeepAliveHoldTimeRem
This is the session keep alive hold time remaining.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8
rcMplsLdpSessionKeepAliveTime
This is the session keep alive time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9
rcMplsLdpSessionMaxPduLength
This is the session's max pdu length.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10
rcMplsLdpSessionDiscontinuityTime
This is the session's discontinuity time.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11
rcMplsLdpSessionHoldTime
This is the session's hold time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12
rcMplsLdpSessionUpTime
This is the session's up time.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13
rcMplsLdpSessionMessagesSent
This is the session total messages sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14
rcMplsLdpSessionMessagesRecv
This is the session total messages received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15

rcMplsLdpInterfaceTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.7 · 1 row entry · 6 columns
Open in standard view 
This is the table of mpls ldp interface.
rcMplsLdpInterfaceEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.7.1
An entry in the mpls ldp interface table.
Indexes
rcMplsLdpInterfaceIfIndex
Column Syntax OID
rcMplsLdpInterfaceIfIndex
This is the LDP interface if index.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1
rcMplsLdpInterfaceNbrCount
This is the number of neighbors.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2
rcMplsLdpInterfaceNextHello
This is the next hello time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3
rcMplsLdpInterfaceConfHoldTime
This is the configured hello hold time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4
rcMplsLdpInterfaceNegHoldTime
This is the negotiated hello hold time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5
rcMplsLdpInterfaceHelloInterval
This is one third of the negotiated hello hold time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6

rcMplsLdpStatsTable

table
.1.3.6.1.4.1.2272.1.74.1.1.3.8 · 1 row entry · 40 columns
Open in standard view 
This is the table of mpls ldp statistics.
rcMplsLdpStatsEntry entry .1.3.6.1.4.1.2272.1.74.1.1.3.8.1
An entry in the mpls ldp statistics table.
Indexes
rcMplsLdpStatsPeerAddress
Column Syntax OID
rcMplsLdpStatsPeerAddress
This is the LDP Peer Address key for search. This value
can be a valid peer address or 0.0.0.0. If 0.0.0.0
then global LDP statistics are retrieved.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1
rcMplsLdpStatsNotifyRecv
This is the count of notifications received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2
rcMplsLdpStatsNotifySent
This is the count of notifications sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3
rcMplsLdpStatsHelloRecv
This is the count of hellos received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4
rcMplsLdpStatsHelloSent
This is the count of hellos sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5
rcMplsLdpStatsInitRecv
This is the count of initializations received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6
rcMplsLdpStatsInitSent
This is the count of initializations sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7
rcMplsLdpStatsKeepRecv
This is the count of keep alives received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8
rcMplsLdpStatsKeepSent
This is the count of keep alives sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9
rcMplsLdpStatsAddrRecv
This is the count of addrs received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10
rcMplsLdpStatsAddrSent
This is the count of addrs sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11
rcMplsLdpStatsAddrWdrRecv
This is the count of addr withdraws received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12
rcMplsLdpStatsAddrWdrSent
This is the count of addr withdraws sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13
rcMplsLdpStatsLabelMapRecv
This is the count of label maps received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14
rcMplsLdpStatsLabelMapSent
This is the count of label maps sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15
rcMplsLdpStatsLabelReqRecv
This is the count of label reqs received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16
rcMplsLdpStatsLabelReqSent
This is the count of label reqs sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17
rcMplsLdpStatsLabelWdrRecv
This is the count of label withdraws received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18
rcMplsLdpStatsLabelWdrSent
This is the count of label withdraws sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19
rcMplsLdpStatsLabelRelRecv
This is the count of label withdraws received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20
rcMplsLdpStatsLabelRelSent
This is the count of label withdraws sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21
rcMplsLdpStatsLabelAbrRecv
This is the count of label aborts received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22
rcMplsLdpStatsLabelAbrSent
This is the count of label aborts sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23
rcMplsLdpStatsSessionUp
This is the count of session up.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24
rcMplsLdpStatsSessionDown
This is the count of session down.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25
rcMplsLdpStatsBadLdpIdentifierErrors
This is the count of bad LDP ID errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26
rcMplsLdpStatsBadPduLengthErrors
This is the count of Bad PDU length
errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27
rcMplsLdpStatsBadMessageLengthErrors
This is the count of bad message length
errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28
rcMplsLdpStatsUnknownMessageErrors
This is the count of unknown message
errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29
rcMplsLdpStatsUnknownTlvErrors
This is the count of unknown TLV errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30
rcMplsLdpStatsBadTlvLengthErrors
This is the count of bad TLV Length errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31
rcMplsLdpStatsMalformedTlvValueErrors
This is the count of Malinformed TLV
value errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32
rcMplsLdpStatsHoldTimerExpErrors
This is the count of hold time
expired errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33
rcMplsLdpStatsSessionRejectedNoHelloErrors
This is the count of session reject -
no hello errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34
rcMplsLdpStatsSessionRejectedBadParmAdvErrors
This is the count of session reject -
bad parameter advertisement errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35
rcMplsLdpStatsSessionRejectedMaxPduErrors
This is the count of session reject -
Max PDU Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36
rcMplsLdpStatsSessionRejectedBadLabelRangeErrors
This is the count of session reject -
Bad Label Range errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37
rcMplsLdpStatsSessionRejectedSetupAbortErrors
This is the count of session reject -
Setup Abort errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38
rcMplsLdpStatsSessionRejectedBadKeepaliveErrors
This is the count of session reject -
Bad Keepalive Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39
rcMplsLdpStatsSessionOtherErrors
This is the count of other errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40

rcIpMRouteStatsTable

table
.1.3.6.1.4.1.2272.1.76.1.6 · 1 row entry · 8 columns
Open in standard view 
the table containing IP Multicast statistics.
rcIpMRouteStatsEntry entry .1.3.6.1.4.1.2272.1.76.1.6.1
An entry containing the ip multicast statistics
information for the specific group ip address.
Indexes
rcIpMRouteStatsGroupAddress
Column Syntax OID
rcIpMRouteStatsGroupAddress
the IP multicast group address for which this entry
contains ip multicast statistics.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.76.1.6.1.1
rcIpMRouteStatsSourceCount
The number of sources corresponding to the specific group and vrf.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.76.1.6.1.2
rcIpMRouteStatsPkts
The total number of frames that are processed
corresponding to the specific group and vrf.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.76.1.6.1.3
rcIpMRouteStatsBytes
The total number of bytes that are processed
corresponding to the specific group and vrf.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.76.1.6.1.4
rcIpMRouteStatsAverageSizePerPkt
The average length of packets that are processed
corresponding to the specific group and vrf.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.76.1.6.1.5
rcIpMRouteStatsDropPkts
The total number of drop frames that are processed
corresponding to the specific group and vrf.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.76.1.6.1.6
rcIpMRouteStatsDropBytes
The total number of drop bytes that are processed
corresponding to the specific group and vrf.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.76.1.6.1.7
rcIpMRouteStatsPktsPerSecond
The number of packets that are processed
corresponding to the specific group and vrf in one second.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.76.1.6.1.8

rcKhiSlotPerfTable

table
.1.3.6.1.4.1.2272.1.85.10.1 · 1 row entry · 22 columns
Open in standard view 
Slot Performance Information
rcKhiSlotPerfEntry entry .1.3.6.1.4.1.2272.1.85.10.1.1
Slot Performance Entry
Indexes
rcKhiSlotIndex
Column Syntax OID
rcKhiSlotIndex
An unique index used to identify the slot
Integer32
Constraints:
range: 1-12
range: 21-26
 .1.3.6.1.4.1.2272.1.85.10.1.1.1
rcKhiSlotCpuCurrentUtil
Percentage CPU utilization under current
operating conditions. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.85.10.1.1.2
rcKhiSlotCpu5MinAve
Average percentage CPU utilization over
the past 5 minutes. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.85.10.1.1.3
rcKhiSlotCpu5MinHi
Hi watermark for percentage CPU utilization
over the past 5 minutes. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.85.10.1.1.4
rcKhiSlotCpu5MinHiTime
Last time at which sampling occured.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2272.1.85.10.1.1.5
rcKhiSlotMemUsed
The amount of DRAM memory consumed in KB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.6
rcKhiSlotMemFree
The amount of DRAM memory available in KB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.7
rcKhiSlotMemUtil
Current percentage of memory utilization.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.85.10.1.1.8
rcKhiSlotMem5MinAve
Average percentage of memory utilization over the
past 5 minutes.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.85.10.1.1.9
rcKhiSlotMem5MinHi
High watermark for percentage memory
utilization over the past 5 minutes.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.85.10.1.1.10
rcKhiSlotMem5MinHiTime
The last time memory information was registered.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2272.1.85.10.1.1.11
rcKhiSlotUsedFbuf
The number of Fbufs in use.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.12
rcKhiSlotFreeFbuf
The number of Fbufs available.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.13
rcKhiSlotNoFbuf
The number of times when running out of Fbuff
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.14
rcKhiSlotNetStackSysFreeMbuf
The number of network stack system Mbufs available.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.15
rcKhiSlotNetStackDataFreeMbuf
The number of network stack data Mbufs available.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.16
rcKhiSlotNetStackSysUsedMbuf
The number of network stack system Mbufs in use.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.17
rcKhiSlotNetStackDataUsedMbuf
The number of network stack data Mbufs in use.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.18
rcKhiSlotNetStackSysSocketMbuf
The number of network stack system sockets.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.19
rcKhiSlotQHigh
The highest number of queue entries consumed
for system messaging.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.20
rcKhiSlotQNormal
The current number of queue entries consumed
for system messaging.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.21
rcKhiSlotFreeQEntries
The current available number of queue entries
for system messaging.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.1.1.22

rcKhiSlotProcessTable

table
.1.3.6.1.4.1.2272.1.85.10.2 · 1 row entry · 10 columns
Open in standard view 
CP Process Information
rcKhiSlotProcessEntry entry .1.3.6.1.4.1.2272.1.85.10.2.1
Slot Process Entry
Indexes
rcKhiSlotIndex rcKhiSlotProcessId
Column Syntax OID
rcKhiSlotProcessId
Process ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.1
rcKhiSlotProcessParentId
Parent Process ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.2
rcKhiSlotProcessName
Name of the process running
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.85.10.2.1.3
rcKhiSlotProcessVmSize
The size of the virtual memory allocated to the process
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.4
rcKhiSlotProcessVmLck
The amount of locked memory
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.5
rcKhiSlotProcessVmRss
The amount of memory mapped in RAM ( instead of swapped out)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.6
rcKhiSlotProcessVmData
The size of the Data segment
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.7
rcKhiSlotProcessVmStk
The stack size
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.8
rcKhiSlotProcessVmExe
The size of the executable segment
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.9
rcKhiSlotProcessVmLib
The size of the library code
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.2.1.10

rcKhiSlotPThreadTable

table
.1.3.6.1.4.1.2272.1.85.10.3 · 1 row entry · 6 columns
Open in standard view 
Slot pthread information
rcKhiSlotPThreadEntry entry .1.3.6.1.4.1.2272.1.85.10.3.1
Slot pthread entry
Indexes
rcKhiSlotIndex rcKhiSlotProcessId rcKhiSlotPThreadTaskId
Column Syntax OID
rcKhiSlotPThreadTaskId
Task ID
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.85.10.3.1.1
rcKhiSlotPThreadName
Name of the process running
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.85.10.3.1.2
rcKhiSlotPThreadCpuCurrentUtil
Percentage CPU utilization under current
operating conditions. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.85.10.3.1.3
rcKhiSlotPThreadCpu5MinAve
Average percentage CPU utilization over
the past 5 minutes. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.85.10.3.1.4
rcKhiSlotPThreadCpu5MinHi
Hi watermark for percentage CPU utilization
over the past 5 minutes. Value is in tenth's
of a percent.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.85.10.3.1.5
rcKhiSlotPthread5MinHiTime
Last time at which sampling occured.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.2272.1.85.10.3.1.6

rcKhiForwardingCbIfTable

table
.1.3.6.1.4.1.2272.1.85.11.1 · 1 row entry · 10 columns
Open in standard view 
Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbIfEntry entry .1.3.6.1.4.1.2272.1.85.11.1.1
Forwarding Interface KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbIfIndex
Column Syntax OID
rcKhiForwardingCbIfIndex
Interface index for CB's KHI Forwarding data.
Indicies are essentially port based.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.85.11.1.1.1
rcKhiForwardingCbIfRxOk
Receieve OK Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.2
rcKhiForwardingCbIfTxOk
Transmit OK Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.3
rcKhiForwardingCbIfRxErr
Receive Error Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.4
rcKhiForwardingCbIfTxErr
Transmit Error Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.5
rcKhiForwardingCbIfRdbgc0
RDBGC0 Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.6
rcKhiForwardingCbIfRdbgc0Mask
RDBGC0 Mask
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.7
rcKhiForwardingCbIfTdbgc0
TDBGC0 Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.8
rcKhiForwardingCbIfTdbgc0Mask
TDBGC0 Mask
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.9
rcKhiForwardingCbIfK2IpmcDrops
IP Multicast Drops
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.1.1.10

rcKhiForwardingCbMachigigTable

table
.1.3.6.1.4.1.2272.1.85.11.2 · 1 row entry · 8 columns
Open in standard view 
Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbMachigigEntry entry .1.3.6.1.4.1.2272.1.85.11.2.1
Forwarding Mac-Higig KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbMachigigIndex
Column Syntax OID
rcKhiForwardingCbMachigigIndex
Index for CB's Forwarding MAc-Higig Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.85.11.2.1.1
rcKhiForwardingCbMachigigMacK2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.2
rcKhiForwardingCbMachigigMacK2Mac SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.3
rcKhiForwardingCbMachigigRDGBC0 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.4
rcKhiForwardingCbMachigigRDGBC0mask SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.5
rcKhiForwardingCbMachigigTDGBC0 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.6
rcKhiForwardingCbMachigigTDGBC0mask SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.7
rcKhiForwardingCbMachigigIFPDOSDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.2.1.8

rcKhiForwardingCbK2Table

table
.1.3.6.1.4.1.2272.1.85.11.3 · 1 row entry · 9 columns
Open in standard view 
Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbK2Entry entry .1.3.6.1.4.1.2272.1.85.11.3.1
Forwarding K2 KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbK2Index
Column Syntax OID
rcKhiForwardingCbK2Index
Index for CB's Forwarding K2 Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.85.11.3.1.1
rcKhiForwardingCbK2MacK2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.2
rcKhiForwardingCbK2Zagros SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.3
rcKhiForwardingCbK2ZagrosK2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.4
rcKhiForwardingCbK2Mac SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.5
rcKhiForwardingCbK2MacK2Err SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.6
rcKhiForwardingCbK2ZagrosErr SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.7
rcKhiForwardingCbK2ZagrosK2Err SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.8
rcKhiForwardingCbK2MacErr SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.3.1.9

rcKhiForwardingCbZagrosTable

table
.1.3.6.1.4.1.2272.1.85.11.4 · 1 row entry · 89 columns
Open in standard view 
Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbZagrosEntry entry .1.3.6.1.4.1.2272.1.85.11.4.1
Zagros Forwarding KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbZagrosIndex
Column Syntax OID
rcKhiForwardingCbZagrosIndex
Index for CB's Forwarding Zagros Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.85.11.4.1.1
rcKhiForwardingCbZagrosK2Zagros SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.2
rcKhiForwardingCbZagrosRsp SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.3
rcKhiForwardingCbZagrosQe SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.4
rcKhiForwardingCbZagrosQeZagros SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.5
rcKhiForwardingCbZagrosK2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.6
rcKhiForwardingCbZagrosPmmPoolLo SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.7
rcKhiForwardingCbZagrosPmmPoolHigh SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.8
rcKhiForwardingCbZagrosPmmRspDropCounters SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.9
rcKhiForwardingCbZagrosPmmoutputDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.10
rcKhiForwardingCbZagrosPmmAdmissionRspDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.11
rcKhiForwardingCbZagrosPmmAdmissionErrDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.12
rcKhiForwardingCbZagrosPmmPool1Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.13
rcKhiForwardingCbZagrosPmmPool2Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.14
rcKhiForwardingCbZagrosPmmPool3Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.15
rcKhiForwardingCbZagrosPmmPool4Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.16
rcKhiForwardingCbZagrosPmmPool5Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.17
rcKhiForwardingCbZagrosPmmPool6Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.18
rcKhiForwardingCbZagrosPmmPool7Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.19
rcKhiForwardingCbZagrosPmmPool8Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.20
rcKhiForwardingCbZagrosPmmPool9Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.21
rcKhiForwardingCbZagrosPmmPool10Drop SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.22
rcKhiForwardingCbZagrosHbeCommandDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.23
rcKhiForwardingCbZagrosTcamSearchError SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.24
rcKhiForwardingCbZagrosEhpAllPortDownIstCounter SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.25
rcKhiForwardingCbZagrosEhpAllPortDownMltCounter SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.26
rcKhiForwardingCbZagrosEhpErrorDropCounter SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.27
rcKhiForwardingCbZagrosIgrFilterDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.28
rcKhiForwardingCbZagrosZapTxCtl SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.29
rcKhiForwardingCbZagrosZapTxDat SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.30
rcKhiForwardingCbZagrosZapRxCtl SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.31
rcKhiForwardingCbZagrosZapRxDat SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.32
rcKhiForwardingCbZagrosZapTxHbe SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.33
rcKhiForwardingCbZagrosTcamSearchVal SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.34
rcKhiForwardingCbZagrosEmbDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.35
rcKhiForwardingCbZagrosEhpFilterDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.36
rcKhiForwardingCbZagrosEgrIpmcDropCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.37
rcKhiForwardingCbZagrosEgressEsb1Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.38
rcKhiForwardingCbZagrosEgressEsb2Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.39
rcKhiForwardingCbZagrosEgressEsb3Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.40
rcKhiForwardingCbZagrosEgressEsb4Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.41
rcKhiForwardingCbZagrosEgressEsb5Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.42
rcKhiForwardingCbZagrosEgressEsb6Count SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.43
rcKhiForwardingCbZagrosRspRx SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.44
rcKhiForwardingCbZagrosOpTx SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.45
rcKhiForwardingCbZagrosRspTx SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.46
rcKhiForwardingCbZagrosCifRqCount SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.47
rcKhiForwardingCbZagrosCifRsCounter SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.48
rcKhiForwardingCbZagrosPage1Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.49
rcKhiForwardingCbZagrosPage2Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.50
rcKhiForwardingCbZagrosPage3Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.51
rcKhiForwardingCbZagrosPage4Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.52
rcKhiForwardingCbZagrosPage5Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.53
rcKhiForwardingCbZagrosPage6Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.54
rcKhiForwardingCbZagrosPage7Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.55
rcKhiForwardingCbZagrosPage8Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.56
rcKhiForwardingCbZagrosPage9Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.57
rcKhiForwardingCbZagrosPage10Count obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.58
rcKhiForwardingCbZagrosShPp obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.59
rcKhiForwardingCbZagrosFpCounts obsolete SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.60
rcKhiForwardingCbZagrosRspPlcThresholdReg SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.61
rcKhiForwardingCbZagrosRePlc SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.62
rcKhiForwardingCbZagrosNumPools SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.4.1.63
rcKhiForwardingCbZagrosFpCntOPA
Free page counter for OPA(Output Packet Assembler)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.64
rcKhiForwardingCbZagrosFpCntRPA
Free page counter for RPA(RSP Packet Assembler)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.65
rcKhiForwardingCbZagrosFpCntFPM
Free page counter for FPM(Free Page Manager)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.66
rcKhiForwardingCbZagrosRspPlcPktCntPeak
RSP PLC Peak Packet Count
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.67
rcKhiForwardingCbZagrosRspPlcPktCntCurr
RSP PLC Current Packet Count
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.68
rcKhiForwardingCbZagrosRePlcPktCntPeak
RE PLC(Replica Engine Packet Limit Count)Peak Packet Count
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.69
rcKhiForwardingCbZagrosRePlcPktCntCurr
RE PLC Current Packet Count
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.70
rcKhiForwardingCbZagrosShPpPeak
PMM shared pool Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.71
rcKhiForwardingCbZagrosShPpCurr
PMM shared pool Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.72
rcKhiForwardingCbZagrosEgressMultiCastPeak
PMM EgressMultiCast Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.73
rcKhiForwardingCbZagrosEgressMultiCastCurr
PMM EgressMultiCast Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.74
rcKhiForwardingCbZagrosEgressOOBPeak
PMM EgressOOB(Out Of Band) Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.75
rcKhiForwardingCbZagrosEgressOOBCurr
PMM EgressOOB Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.76
rcKhiForwardingCbZagrosIngressHeartbeatPeak
PMM IngressHeartbeat Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.77
rcKhiForwardingCbZagrosIngressHeartbeatCurr
PMM IngressHeartbeat Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.78
rcKhiForwardingCbZagrosIngressCOPInsertPeak
PMM IngressCOPInsert Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.79
rcKhiForwardingCbZagrosIngressCOPInsertCurr
PMM IngressCOPInsert Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.80
rcKhiForwardingCbZagrosIngressEfCtlPeak
PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.81
rcKhiForwardingCbZagrosIngressEfCtlCurr
PMM Ingress EF/CTL Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.82
rcKhiForwardingCbZagrosIngressAfBePeak
PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.83
rcKhiForwardingCbZagrosIngressAfBeCurr
PMM Ingress AF/BE Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.84
rcKhiForwardingCbZagrosEgressL2BcUcPeak
PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.85
rcKhiForwardingCbZagrosEgressL2BcUcCurr
PMM Egress L2BC/UC Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.86
rcKhiForwardingCbZagrosEgressMirrorPeak
PMM Egress Mirror Peak Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.87
rcKhiForwardingCbZagrosEgressMirrorCurr
PMM Egress Mirror Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.88
rcKhiForwardingCbZagrosPool9Curr
PMM Pool9 Current Value
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.4.1.90

rcKhiForwardingCbRspTable

table
.1.3.6.1.4.1.2272.1.85.11.5 · 1 row entry · 24 columns
Open in standard view 
Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbRspEntry entry .1.3.6.1.4.1.2272.1.85.11.5.1
Forwarding Rsp KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbRspIndex
Column Syntax OID
rcKhiForwardingCbRspIndex
Index for CB's Forwarding Rsp Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.85.11.5.1.1
rcKhiForwardingCbRspLsmDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.2
rcKhiForwardingCbRspExceptionDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.3
rcKhiForwardingCbRspFrameErrorDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.4
rcKhiForwardingCbRspFdibFullDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.5
rcKhiForwardingCbRspIngrMltAllPortDown SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.6
rcKhiForwardingCbRspEgressMltAllPortDownDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.7
rcKhiForwardingCbRspEgressIpMcastRecordsNotFound SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.8
rcKhiForwardingCbRspEgressIpMcastMltWrongPort SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.9
rcKhiForwardingCbRspEgressIpMcastSourceKnockout SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.10
rcKhiForwardingCbRspIngressDaNotFoundDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.11
rcKhiForwardingCbRspIngressUnknown SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.12
rcKhiForwardingCbRspIngressDiscardDestIdDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.13
rcKhiForwardingCbRspMacLearningPacketDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.14
rcKhiForwardingCbRspIngrMltAllPortsDown SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.15
rcKhiForwardingCbRspIngressIpmcSupressionDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.16
rcKhiForwardingCbRspUnsupportedFeatureDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.17
rcKhiForwardingCbRspAclDiscards SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.18
rcKhiForwardingCbRspIngressIpmcLookupFails SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.19
rcKhiForwardingCbRspIpv4DestIpLookupFails SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.20
rcKhiForwardingCbRspIpv4SourceIpLookupFails SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.21
rcKhiForwardingCbRspL3MirrorDrops SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.22
rcKhiForwardingCbRspIpV6LookupFails SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.23
rcKhiForwardingCbRspIpV6TunnelLookupV4Fails SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.5.1.24

rcKhiForwardingCbQeTable

table
.1.3.6.1.4.1.2272.1.85.11.6 · 1 row entry · 95 columns
Open in standard view 
Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data.
rcKhiForwardingCbQeEntry entry .1.3.6.1.4.1.2272.1.85.11.6.1
Forwarding Qe KHI - Cobalt Blue table entry.
Indexes
rcKhiForwardingCbQeIndex
Column Syntax OID
rcKhiForwardingCbQeIndex
Index for CB's Forwarding Qe Health data. There are 6
indicies reserved on a per slot basis. Depending on
the card present and the data being requested not all
indicies may be used.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2272.1.85.11.6.1.1
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.2
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.3
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.4
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.5
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.6
rcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.7
rcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.8
rcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.9
rcKhiForwardingCbQeIngressPmSwitchPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.10
rcKhiForwardingCbQeIngressPmLocalPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.11
rcKhiForwardingCbQeIngressPmSwitchTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.12
rcKhiForwardingCbQeIngressPmLocalTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.13
rcKhiForwardingCbQeIngressSr0RxP0PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.14
rcKhiForwardingCbQeIngressSr1RxP0PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.15
rcKhiForwardingCbQeIngressSr0RxP1PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.16
rcKhiForwardingCbQeIngressSr1RxP1PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.17
rcKhiForwardingCbQeIngressSr0RxP2PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.18
rcKhiForwardingCbQeIngressSr1RxP2PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.19
rcKhiForwardingCbQeIngressSr0RxP3PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.20
rcKhiForwardingCbQeIngressSr1RxP3PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.21
rcKhiForwardingCbQeIngressSr0RxP4PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.22
rcKhiForwardingCbQeIngressSr1RxP4PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.23
rcKhiForwardingCbQeIngressSr0RxP5PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.24
rcKhiForwardingCbQeIngressSr1RxP5PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.25
rcKhiForwardingCbQeIngressSr0RxP6PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.26
rcKhiForwardingCbQeIngressSr1RxP6PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.27
rcKhiForwardingCbQeIngressSr0RxP7PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.28
rcKhiForwardingCbQeIngressSr1RxP7PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.29
rcKhiForwardingCbQeIngressSr0RxP8PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.30
rcKhiForwardingCbQeIngressSr1RxP8PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.31
rcKhiForwardingCbQeIngressSr0RxP9PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.32
rcKhiForwardingCbQeIngressSr1RxP9PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.33
rcKhiForwardingCbQeIngressSr0RxP10PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.34
rcKhiForwardingCbQeIngressSr1RxP10PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.35
rcKhiForwardingCbQeIngressSr0RxP11PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.36
rcKhiForwardingCbQeIngressSr1RxP11PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.37
rcKhiForwardingCbQeIngressSr0RxP12PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.38
rcKhiForwardingCbQeIngressSr1RxP12PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.39
rcKhiForwardingCbQeIngressSr0RxP13PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.40
rcKhiForwardingCbQeIngressSr1RxP13PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.41
rcKhiForwardingCbQeIngressSr0RxP14PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.42
rcKhiForwardingCbQeIngressSr1RxP14PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.43
rcKhiForwardingCbQeIngressSr0RxP15PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.44
rcKhiForwardingCbQeIngressSr1RxP15PktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.45
rcKhiForwardingCbQeIngressSr0RxTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.46
rcKhiForwardingCbQeIngressSr1RxTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.47
rcKhiForwardingCbQeIngressRbIdp0RequestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.48
rcKhiForwardingCbQeIngressRbIdp1RequestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.49
rcKhiForwardingCbQeIngressRbIdp2RequestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.50
rcKhiForwardingCbQeIngressRbIdp3RequestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.51
rcKhiForwardingCbQeIngressRbIdp4RequestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.52
rcKhiForwardingCbQeIngressRbEnqrespPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.53
rcKhiForwardingCbQeEgressSvPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.54
rcKhiForwardingCbQeEgressSt0P0TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.55
rcKhiForwardingCbQeEgressSt1P0TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.56
rcKhiForwardingCbQeEgressSt0P1TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.57
rcKhiForwardingCbQeEgressSt1P1TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.58
rcKhiForwardingCbQeEgressSt0P2TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.59
rcKhiForwardingCbQeEgressSt1P2TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.60
rcKhiForwardingCbQeEgressSt0P3TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.61
rcKhiForwardingCbQeEgressSt1P3TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.62
rcKhiForwardingCbQeEgressSt0P4TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.63
rcKhiForwardingCbQeEgressSt1P4TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.64
rcKhiForwardingCbQeEgressSt0P5TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.65
rcKhiForwardingCbQeEgressSt1P5TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.66
rcKhiForwardingCbQeEgressSt0P6TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.67
rcKhiForwardingCbQeEgressSt1P6TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.68
rcKhiForwardingCbQeEgressSt0P7TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.69
rcKhiForwardingCbQeEgressSt1P7TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.70
rcKhiForwardingCbQeEgressSt0P8TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.71
rcKhiForwardingCbQeEgressSt1P8TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.72
rcKhiForwardingCbQeEgressSt0P9TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.73
rcKhiForwardingCbQeEgressSt1P9TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.74
rcKhiForwardingCbQeEgressSt0P10TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.75
rcKhiForwardingCbQeEgressSt1P10TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.76
rcKhiForwardingCbQeEgressSt0P11TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.77
rcKhiForwardingCbQeEgressSt1P11TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.78
rcKhiForwardingCbQeEgressSt0P12TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.79
rcKhiForwardingCbQeEgressSt1P12TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.80
rcKhiForwardingCbQeEgressSt0P13TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.81
rcKhiForwardingCbQeEgressSt1P13TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.82
rcKhiForwardingCbQeEgressSt0P14TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.83
rcKhiForwardingCbQeEgressSt1P14TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.84
rcKhiForwardingCbQeEgressSt0P15TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.85
rcKhiForwardingCbQeEgressSt1P15TxPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.86
rcKhiForwardingCbQeEgressSt0TxTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.87
rcKhiForwardingCbQeEgressSt1TxTestPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.88
rcKhiForwardingCbQeSvPartialPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.89
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.90
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.91
rcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.92
rcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.93
rcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.94
rcKhiForwardingCbQeQmError1 SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.11.6.1.95

rcKhiForwardingIfpTable

table deprecated
.1.3.6.1.4.1.2272.1.85.11.7 · 1 row entry · 9 columns
Open in standard view 
Forwarding Ifp Key Health Indicator MIB - All VSP Data.
rcKhiForwardingIfpEntry entry .1.3.6.1.4.1.2272.1.85.11.7.1
Forwarding Ifp KHI - VSP table entry.
Indexes
rcKhiForwardingIfpSlot rcKhiForwardingIfpIndex
Column Syntax OID
rcKhiForwardingIfpSlot deprecated
Slot Number
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.85.11.7.1.1
rcKhiForwardingIfpIndex deprecated
Index of the IFP Rule
Integer32
Constraints:
range: 3-500
 .1.3.6.1.4.1.2272.1.85.11.7.1.2
rcKhiForwardingIfpName deprecated
Name of the IFP Rule
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.85.11.7.1.3
rcKhiForwardingIfpSlice0Ports deprecated
Range of Ports in slice0 of the slot.
Display format will have Ports 1-24 or 1-8
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.7.1.4
rcKhiForwardingIfpSlice0Cnt deprecated
Counter for slice 0
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.7.1.5
rcKhiForwardingIfpSlice1Ports deprecated
Range of Ports in slice1 of the slot.
Display format will have Ports 25-48 or 9-16
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.7.1.6
rcKhiForwardingIfpSlice1Cnt deprecated
Counter for slice 1
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.7.1.7
rcKhiForwardingIfpSlice2Ports deprecated
Range of Ports in slice2 of the slot.
Display format will have Ports 0 or 17-24
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.7.1.8
rcKhiForwardingIfpSlice2Cnt deprecated
Counter for slice 2
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.7.1.9

rcKhiForwardingIfpNewTable

table
.1.3.6.1.4.1.2272.1.85.11.8 · 1 row entry · 10 columns
Open in standard view 
Forwarding Ifp New Key Health Indicator MIB.
This table replaces the old table
rcKhiForwardingIfpTable
rcKhiForwardingIfpNewEntry entry .1.3.6.1.4.1.2272.1.85.11.8.1
Forwarding Ifp KHI - VSP table entry.
Indexes
rcKhiForwardingIfpNewSlot rcKhiForwardingIfpNewTblType rcKhiForwardingIfpNewIndex
Column Syntax OID
rcKhiForwardingIfpNewSlot
Slot Number
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.85.11.8.1.1
rcKhiForwardingIfpNewTblType
Type of table IFP PCV for both 1G and 10G cards.
IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card
Enumeration
Enumerated Values:
1ifpPcv
2ifpPcvMacInMacTagged
3ifpPcvMacInMacUntagged
 .1.3.6.1.4.1.2272.1.85.11.8.1.2
rcKhiForwardingIfpNewIndex
Index of the IFP Rule
Integer32
Constraints:
range: 3-500
 .1.3.6.1.4.1.2272.1.85.11.8.1.3
rcKhiForwardingIfpNewName
Name of the IFP Rule
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.85.11.8.1.4
rcKhiForwardingIfpNewSlice0Ports
Range of Ports in slice0 of the slot.
Display format will have Ports 1-24 or 1-8
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.8.1.5
rcKhiForwardingIfpNewSlice0Cnt
Counter for slice 0
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.8.1.6
rcKhiForwardingIfpNewSlice1Ports
Range of Ports in slice1 of the slot.
Display format will have Ports 25-48 or 9-16
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.8.1.7
rcKhiForwardingIfpNewSlice1Cnt
Counter for slice 1
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.8.1.8
rcKhiForwardingIfpNewSlice2Ports
Range of Ports in slice2 of the slot.
Display format will have Ports 0 or 17-24
based on the card type
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.85.11.8.1.9
rcKhiForwardingIfpNewSlice2Cnt
Counter for slice 2
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.85.11.8.1.10

rcKhiCppPortStatsTable

table
.1.3.6.1.4.1.2272.1.85.12.3 · 1 row entry · 5 columns
Open in standard view 
Khi Cpp Port Statistics MIB - All VSP Data.
rcKhiCppPortStatsEntry entry .1.3.6.1.4.1.2272.1.85.12.3.1
Khi Cpp Port Statistics - VSP table entry.
Indexes
rcKhiCppPortStatsPort rcKhiCppPortStatsPacket
Column Syntax OID
rcKhiCppPortStatsPort
Port Number-this entry contains information
about packet type, count of Rx and Tx packet
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.85.12.3.1.1
rcKhiCppPortStatsPacket
Packet Type
Integer32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.2272.1.85.12.3.1.2
rcKhiCppPortStatsPacketName
Name of the Packet
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.85.12.3.1.3
rcKhiCppPortStatsRxPackets
Rx count for a particular Packet Type
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.12.3.1.4
rcKhiCppPortStatsTxPackets
Tx count for a particular Packet Type
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.12.3.1.5

rcKhiCppIoCopStatsTable

table
.1.3.6.1.4.1.2272.1.85.12.4 · 1 row entry · 3 columns
Open in standard view 
Khi Cpp IoCop Statistics MIB - All VSP Data.
rcKhiCppIoCopStatsEntry entry .1.3.6.1.4.1.2272.1.85.12.4.1
Khi Cpp IoCop Statistics - VSP table entry.
Indexes
rcKhiCppIoCopStatsSlot
Column Syntax OID
rcKhiCppIoCopStatsSlot
Slot Number
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.85.12.4.1.1
rcKhiCppIoCopStatsMacMgmtRxPackets
MacMgmt Rx Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.12.4.1.2
rcKhiCppIoCopStatsIpFixRxPackets
IpFix Rx Packets
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.85.12.4.1.3

rc2kCpuSerialPortTable

table
.1.3.6.1.4.1.2272.1.100.3 · 1 row entry · 13 columns
Open in standard view 
2k CPU Serial Port table
rc2kCpuSerialPortEntry entry .1.3.6.1.4.1.2272.1.100.3.1
Entry containing information of 2k CPU Serial Port
Indexes
rc2kCpuSerialPortIfIndex
Column Syntax OID
rc2kCpuSerialPortIfIndex
IfIndex for this port.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.3.1.1
rc2kCpuSerialPortDescr
Port description.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.3.1.2
rc2kCpuSerialPortMode
Used to configure the mode this port should
operate in.
Enumerationr/w
Enumerated Values:
1cli
2slip
3ppp
 .1.3.6.1.4.1.2272.1.100.3.1.3
rc2kCpuSerialPortAdminStatus
Used to configure the administrative status
setting for this port.
Enumerationr/w
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.3.1.4
rc2kCpuSerialPortOperStatus
Used to indicate the operational status
setting for this port.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.3.1.5
rc2kCpuSerialPortBaudRate
Used to configure the baud rate of this port.
Enumerationr/w
Enumerated Values:
2400baud2400
4800baud4800
9600baud9600
19200baud19200
38400baud38400
57600baud57600
115200baud115200
 .1.3.6.1.4.1.2272.1.100.3.1.6
rc2kCpuSerialPortDataBits
Used to configure the number of data bits, per
byte of data, this port should send/receive.
Enumerationr/w
Enumerated Values:
1seven
2eight
 .1.3.6.1.4.1.2272.1.100.3.1.7
rc2kCpuSerialPortMyAddr
Used to configure this port's IP address.
Used for both 'slip' and 'ppp' modes.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.3.1.8
rc2kCpuSerialPortPeerAddr
Used to configure the peer's IP address.
Used for both 'slip' and 'ppp' modes.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.3.1.9
rc2kCpuSerialPortSlipMtu
Used to configure the MTU for this port.
Used for slip only.
Integer32r/w
Constraints:
range: 0-224
 .1.3.6.1.4.1.2272.1.100.3.1.10
rc2kCpuSerialPortSlipTxRxCompress
Used to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.3.1.11
rc2kCpuSerialPortSlipRxCompress
Used to enable/disable compression for receiving
packets on this port. Used for slip only.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.3.1.12
rc2kCpuSerialPortPppConfigFile
Used to configure the configuration file to use
for PPP.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.100.3.1.13

rc2kDeviceGlobalTable

table
.1.3.6.1.4.1.2272.1.100.4.1 · 1 row entry · 15 columns
Open in standard view 
2k CPU Ethernet Port table
rc2kDeviceGlobalEntry entry .1.3.6.1.4.1.2272.1.100.4.1.1
Entry containing information of 2k CPU Ethernet Port
Indexes
rc2kDeviceGlobalSlot
Column Syntax OID
rc2kDeviceGlobalSlot
slot number
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.4.1.1.1
rc2kDeviceGlobalFlashBytesUsed
bytes used
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.2
rc2kDeviceGlobalFlashBytesFree
bytes free
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.3
rc2kDeviceGlobalFlashNumFiles
# files in flash
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.4
rc2kDeviceGlobalPcmciaBytesUsed
bytes used
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.5
rc2kDeviceGlobalPcmciaBytesFree
bytes free
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.6
rc2kDeviceGlobalPcmciaNumFiles
# files in pcmcia
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.7
rc2kDeviceGlobalAction
none(1), resetPcmcia(2), ..
Enumerationr/w
Enumerated Values:
1none
 .1.3.6.1.4.1.2272.1.100.4.1.1.8
rc2kDeviceGlobalResult
Used to indicate the result of the last action
performed on one of the system's device.
Enumeration
Enumerated Values:
1none
2inProgress
3success
4fail
 .1.3.6.1.4.1.2272.1.100.4.1.1.9
rc2kDeviceGlobalUsbBytesUsed
bytes used in USB
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.13
rc2kDeviceGlobalUsbBytesFree
bytes free in USB
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.14
rc2kDeviceGlobalUsbNumFiles
# files in USB
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.15
rc2kDeviceGlobalExtflashBytesUsed
bytes used in Extflash
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.16
rc2kDeviceGlobalExtflashBytesFree
bytes free in Extflash
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.17
rc2kDeviceGlobalExtflashNumFiles
# files in Extflash
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.18

rc2kDeviceFlashFileTable

table
.1.3.6.1.4.1.2272.1.100.4.3 · 1 row entry · 4 columns
Open in standard view 
2k Flash table
rc2kDeviceFlashFileEntry entry .1.3.6.1.4.1.2272.1.100.4.3.1
Entry containing information of 2k CPU Serial Port
Indexes
rc2kDeviceFlashFileSlot rc2kDeviceFlashFileName
Column Syntax OID
rc2kDeviceFlashFileSlot
slot number
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.4.3.1.1
rc2kDeviceFlashFileName
name of file
OctetString
Constraints:
range: 1-114
 .1.3.6.1.4.1.2272.1.100.4.3.1.2
rc2kDeviceFlashFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.3.1.3
rc2kDeviceFlashFileSize
size in bytes
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.3.1.4

rc2kDeviceExtflashFileTable

table
.1.3.6.1.4.1.2272.1.100.4.9 · 1 row entry · 4 columns
Open in standard view 
2k Flash table
rc2kDeviceExtflashFileEntry entry .1.3.6.1.4.1.2272.1.100.4.9.1
Entry containing information of extflash files
Indexes
rc2kDeviceExtflashFileSlot rc2kDeviceExtflashFileName
Column Syntax OID
rc2kDeviceExtflashFileSlot
slot number
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.4.9.1.1
rc2kDeviceExtflashFileName
name of file
OctetString
Constraints:
range: 1-114
 .1.3.6.1.4.1.2272.1.100.4.9.1.2
rc2kDeviceExtflashFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.9.1.3
rc2kDeviceExtflashFileSize
size in bytes
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.4.9.1.4

rc2kDeviceUsbFileTable

table
.1.3.6.1.4.1.2272.1.100.4.10 · 1 row entry · 4 columns
Open in standard view 
2k Usb table
rc2kDeviceUsbFileEntry entry .1.3.6.1.4.1.2272.1.100.4.10.1
Entry containing information of USB files
Indexes
rc2kDeviceUsbFileSlot rc2kDeviceUsbFileName
Column Syntax OID
rc2kDeviceUsbFileSlot
slot number
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.4.10.1.1
rc2kDeviceUsbFileName
name of file
OctetString
Constraints:
range: 1-114
 .1.3.6.1.4.1.2272.1.100.4.10.1.2
rc2kDeviceUsbFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.10.1.3
rc2kDeviceUsbFileSize
size in bytes
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.4.10.1.4

rc2kBootConfigTable

table
.1.3.6.1.4.1.2272.1.100.5 · 1 row entry · 29 columns
Open in standard view 
2k Boot Configuration table
rc2kBootConfigEntry entry .1.3.6.1.4.1.2272.1.100.5.1
Entry containing boot configuration information.
Indexes
rc2kBootConfigSlot
Column Syntax OID
rc2kBootConfigSlot
slot number, VSP uses 1,2
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.5.1.1
rc2kBootConfigLastBootConfigSource
boot config source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.2
rc2kBootConfigLastRuntimeImageSource
runtime image source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.3
rc2kBootConfigLastRuntimeConfigSource
runtime config source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.4
rc2kBootConfigPrimaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.5
rc2kBootConfigPrimaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.6
rc2kBootConfigSecondaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.7
rc2kBootConfigSecondaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.8
rc2kBootConfigTertiaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.9
rc2kBootConfigTertiaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.10
rc2kBootConfigEnableAutoBoot
auto boot mode
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.11
rc2kBootConfigEnableFactoryDefaults
use factory default
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.12
rc2kBootConfigEnableDebugMode
debug mode
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.13
rc2kBootConfigEnableHwWatchDogTimer
hw watch dog timer
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.14
rc2kBootConfigEnableRebootOnError
reboot on error
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.15
rc2kBootConfigEnableTelnetServer
telnet server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.16
rc2kBootConfigEnableRloginServer
rlogin server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.17
rc2kBootConfigEnableFtpServer
ftp server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.18
rc2kBootConfigEnableTftpServer
tftp server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.19
rc2kBootConfigSwVersion
current sw version
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.100.5.1.20
rc2kBootConfigMulticastConfigProfile
multicast config
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.100.5.1.21
rc2kBootConfigEnableSshServer
ssh server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.22
rc2kBootConfigEnableAltLed
Boot flag for enableing Alternate LED
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.23
rc2kBootConfigPrimaryBackupConfigSource
primary backup config source (safeconfig)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.24
rc2kBootConfigSecondaryBackupConfigSource
secondary backup config source (safeconfig)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.25
rc2kBootConfigTertiaryBackupConfigSource
tertiary backup config source (safeconfig)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.26
rc2kBootConfigEnable8616ReAutoneg
Enable re-autoneg for 8616SX Cards (Intel GMAC fix)
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.27
rc2kBootConfigMezzImageSource
Mezz image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.28
rc2kBootConfigEnableMezz
Enable/disable Mezz Flag
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.5.1.29

rc2kCardTable

table
.1.3.6.1.4.1.2272.1.100.6 · 1 row entry · 22 columns
Open in standard view 
2k Card table
rc2kCardEntry entry .1.3.6.1.4.1.2272.1.100.6.1
Entry containing information of 2k Card
Indexes
rc2kCardIndex
Column Syntax OID
rc2kCardIndex
slot number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.100.6.1.1
rc2kCardFrontType
Used to indicate card types in the Accelar
8000 product families.

For Accelar 8000 devices, all cards use
an encoded value according to the following rule:

| 6 | 1 | 5 | 4 …
Enumeration
Enumerated Values:
1other
537788672rc2kCPU
539033880rc2k24x100BaseTX
539033888rc2k32x100BaseTX
539033904rc2k48x100BaseTX
539099400rc2k8x1000BaseT
539099408rc2k16x1000BaseT
540082456rc2k24x100BaseFX
540147976rc2k8x1000BaseSXBB
540147984rc2k16x1000BaseSXBB
540156168rc2k8x1000BaseLXBB
540164360rc2k8x1000BaseXDBB
540168452rc2k4x1000BaseOPM
540168456rc2k8x1000BaseIC
540168464rc2k16x1000BaseIC
540180744rc2k8x1000BaseSXRBB
540188936rc2k8x1000BaseLXRBB
541327624rc2k8xOC3
541393154rc2k2xOC12
541401350rc2k6xPOS
542441732rc2k4xATM
542441736rc2k8xATM
545128704rc2kRMON
572588320rc2k32x100BaseTXM
572588336rc2k48x100BaseTXM
572653832rc2k8x1000BaseTM
573702408rc2k8x1000BaseSXBBM
573722888rc2k8x1000BaseICM
573767937rc2k1x10GBaseLW
573784321rc2k1x10GBaseLR
574955782rc2k6xPOSM
575996168rc2k8xATMM
606208304rc2kPR48X1000BaseTX
606241072rc2kPR48x1000BaseGTRS
607277342rc2kPR30X1000BaseSXBB
607277346rc2kPR34xXGRS
607277360rc2kPR48x1000BaseGBRS
607338755rc2kPR3X10GBaseGbic
607338764rc2kPR12X10GBaseXLRS
607346947rc2kPR3X10GBaseXZW
807469360rc2kMg48x100BaseTX
807473440rc2kMg32x100BaseTX
808522000rc2kMg16x100BaseFX
808583432rc2kMg8x1000BaseTX
808603912rc2kMg8x1000BaseIC
817955120rc2kMg48x100BaseTC
1073873665cbCP-CSC
1075708672cbSF3200
1075712768cbSF9600
1075970864cb48x1000BaseTX
1075974960cb48x1000BaseTXPOE
1077044016cb48x1000SFP
1077109528cb24x10GBaseSFP
1077109552cb48x10GBaseSFP
1084097280cbACPowerSupply
1085145856cbCPFanTray
1085149952cbIOFanTray
1090388736cbMidplane-28
1091437312cbAUX
1342316808rc2kPP8300-CPU8x1000BaseSFP
1344340272rc2kPP8300-48x100BaseTX
1344344368rc2kPP8300-48x100BaseTXPOE
1344405784rc2kPP8300-24x1000BaseTX
1893859592rc2kAlteonLP
1899102468rc2kAlteonWSM
1899106564rc2kAlteonASFM
1926365441rc2k61AlteonSAM
1926369537rc2k62AlteonSAM
 .1.3.6.1.4.1.2272.1.100.6.1.2
rc2kCardFrontDescription
description
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.3
rc2kCardFrontAdminStatus
Used to indicate the administrative status of this
card
Enumerationr/w
Enumerated Values:
1up
2down
3testing
4reset
 .1.3.6.1.4.1.2272.1.100.6.1.4
rc2kCardFrontOperStatus
Used to indicate the operational status of this card.
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
 .1.3.6.1.4.1.2272.1.100.6.1.5
rc2kCardFrontSerialNum
manufacturer serial number of card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.6
rc2kCardFrontPartNumber
manufacturer part number of card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.8
rc2kCardFrontDateCode
manufacturer date code
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.9
rc2kCardFrontDeviations
deviations
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.10
rc2kCardFrontMacAddr
base mac address
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.100.6.1.11
rc2kCardBackType
Refer to rc2kCardFrontType for the encoding scheme
Enumeration
Enumerated Values:
0none
1other
536969472rc2kBackplane
538837248rc2kSFM
546177280rc2kBFM0
546177282rc2kBFM2
546177283rc2kBFM3
546177286rc2kBFM6
546177288rc2kBFM8
605946112rc2kFSFM
613351682rc2kDPM2
613351690rc2kEDPM2
613351861rc2kDPM1
613351863rc2kDPM3
613351871rc2kEDPM3
807272704rc2kMGSFM
1888354564rc2kBFM4
 .1.3.6.1.4.1.2272.1.100.6.1.12
rc2kCardBackDescription
customer card description
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.13
rc2kCardBackSerialNum
customer serial number of card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.14
rc2kCardBackHwVersion
hardware version
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.15
rc2kCardBackPartNumber
customer part number
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.16
rc2kCardBackDateCode
customer date code
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.17
rc2kCardBackDeviations
customer deviations
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.18
rc2kCardASICDescr
ASIC descriptor
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.6.1.21
rc2kCardSmltOnSingleCpSupported
Used to indicate whether an IO card is updated to
support SMLT on single Cp feature or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.6.1.23
rc2kCardSlotPriority
Used to indicate the priority of the slot for power
management. It will take effect only after reboot.
Enumerationr/w
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.6.1.29
rc2kCardSlotOriginalPriority
Priority of the slot for power management which the
swtich has currently booted with. It will remain the
same until the next reboot.
Enumeration
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.6.1.30
rc2kCardSlotPower
Administrately turn on or off power on this slot.
it only applicable on Standby CP & IO and SF Card
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2272.1.100.6.1.32

rc2kQosIngressTagToQosTable

table
.1.3.6.1.4.1.2272.1.100.8.2 · 1 row entry · 3 columns
Open in standard view 
This table is used to specify the 802.1P
to QOS (802.1P->QOS) mapping on packet 
ingress.
rc2kQosIngressTagToQosEntry entry .1.3.6.1.4.1.2272.1.100.8.2.1
Entry containing information of 8021P->Qos mapping
Indexes
rc2kQosIngressTagToQosRow
Column Syntax OID
rc2kQosIngressTagToQosRow
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.100.8.2.1.1
rc2kQosIngressTagToQosInIeee8021P
802.1P
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.2.1.2
rc2kQosIngressTagToQosQosLevel
Qos level
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.2.1.3

rc2kQosEgressQosToTagTable

table
.1.3.6.1.4.1.2272.1.100.8.4 · 1 row entry · 3 columns
Open in standard view 
This table is used to specify the QOS to
802.1P (QOS->802.1P) mapping on packet
egress.
rc2kQosEgressQosToTagEntry entry .1.3.6.1.4.1.2272.1.100.8.4.1
Entry containing information of Qos->Qos mapping
Indexes
rc2kQosEgressQosToTagRow
Column Syntax OID
rc2kQosEgressQosToTagRow
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.100.8.4.1.1
rc2kQosEgressQosToTagQosLevel
qos level
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.4.1.2
rc2kQosEgressQosToTagOutIeee8021P
802.1P
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.4.1.3

rc2kQosTrafficProfileTable

table
.1.3.6.1.4.1.2272.1.100.8.6 · 1 row entry · 9 columns
Open in standard view 
This table is used to specify traffic profiles 
for the system.  These traffic profiles are
used for policying purposes to guarantee streams
of traffic do not egress the system above a
certain rate.  These traffic profiles are applied
in the 'rcIpFilterTable'.
rc2kQosTrafficProfileEntry entry .1.3.6.1.4.1.2272.1.100.8.6.1
Entry containing information of Qos->Qos mapping
Indexes
rc2kQosTrafficProfileId
Column Syntax OID
rc2kQosTrafficProfileId
Profile id
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.100.8.6.1.1
rc2kQosTrafficProfileName
Profile name
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.8.6.1.2
rc2kQosTrafficProfileEnable
Enable this entry
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.8.6.1.3
rc2kQosTrafficProfileTranslateDscpEnable
Used to specify whether translation of the DSCP
field should be performed. If enabled, the value
in the DSCP field for packets that fall within
the traffic profile will get translated to
'rc2kQosTrafficProfileInProfi…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.8.6.1.4
rc2kQosTrafficProfileInProfileDscp
Used to specify the DSCP value for 'good' packets.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.100.8.6.1.5
rc2kQosTrafficProfileOutProfileDscp
Used to specify the DSCP value for 'violation'
packets.
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.100.8.6.1.6
rc2kQosTrafficProfileDiscardEnable
Used to specify whether packets that fall outside
the traffic profile should be discarded.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.8.6.1.7
rc2kQosTrafficProfileAverageRate
Average rate in packets per second.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.8.6.1.8
rc2kQosTrafficProfileRowStatus
Used to create/delete entries.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.100.8.6.1.10

rc2kQosIngressDscpToQosTable

table
.1.3.6.1.4.1.2272.1.100.8.7 · 1 row entry · 4 columns
Open in standard view 
This table is used to specify the DSCP to
QOS (Dscp->QOS) mapping on packet ingress.
rc2kQosIngressDscpToQosEntry entry .1.3.6.1.4.1.2272.1.100.8.7.1
Entry containing information of Dscp->Qos mapping
Indexes
rc2kQosIngressDscpToQosRow
Column Syntax OID
rc2kQosIngressDscpToQosRow
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.100.8.7.1.1
rc2kQosIngressDscpToQosInDscp
A 6-bit value used to define the Differentiated
Service Code Point(DSCP).
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.100.8.7.1.2
rc2kQosIngressDscpToQosInDscpBinaryFormat
The 'rc2kQosIngressDscpToQosInDscp' value shown
in a binary format (network order).
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.100.8.7.1.3
rc2kQosIngressDscpToQosQosLevel
qos level
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.7.1.4

rc2kQosEgressQosToDscpTable

table
.1.3.6.1.4.1.2272.1.100.8.8 · 1 row entry · 4 columns
Open in standard view 
This table is used to specify the QOS to
DSCP field (QOS->DsField) mapping on packet
egress.
rc2kQosEgressQosToDscpEntry entry .1.3.6.1.4.1.2272.1.100.8.8.1
Entry containing information of Qos->Qos mapping
Indexes
rc2kQosEgressQosToDscpRow
Column Syntax OID
rc2kQosEgressQosToDscpRow
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.100.8.8.1.1
rc2kQosEgressQosToDscpQosLevel
qos level
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.100.8.8.1.2
rc2kQosEgressQosToDscpOutDscp
A 6-bit value used to define the Differentiated
Service Code Point(DSCP).
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.100.8.8.1.3
rc2kQosEgressQosToDscpOutDscpBinaryFormat
The 'rc2kQosEgressQosToDscpOutDscp' value show
in a binary format (network order).
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.2272.1.100.8.8.1.4

rc2kAtmPortTable

table
.1.3.6.1.4.1.2272.1.100.9.2 · 1 row entry · 10 columns
Open in standard view 
ATM port table
rc2kAtmPortEntry entry .1.3.6.1.4.1.2272.1.100.9.2.1
Entry containing information of ATM port
Indexes
rc2kAtmPortIfIndex
Column Syntax OID
rc2kAtmPortIfIndex
port number
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.9.2.1.1
rc2kAtmPortNumVpiBits
# of vpi bits. For OC3, the max number of vpibits is 6.
However, for OC12, it is 8. Both media types share
the same MIB object.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.100.9.2.1.2
rc2kAtmPortNumVciBits
# of vci bits
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2272.1.100.9.2.1.3
rc2kAtmPortMediaType
media type
Enumeration
Enumerated Values:
1smf
2mmf
3ds3
 .1.3.6.1.4.1.2272.1.100.9.2.1.4
rc2kAtmPortScrambleEnable
enable scramble
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.9.2.1.5
rc2kAtmPortFramingMode
port framing mode
Enumerationr/w
Enumerated Values:
1sonet
2sdh
3ds3CbitAdm
4ds3CbitPlcp
5ds3M23Adm
6ds3M23Plcp
 .1.3.6.1.4.1.2272.1.100.9.2.1.6
rc2kAtmPortClockSource
clock source
Enumerationr/w
Enumerated Values:
1loopTimed
2freeRunning
 .1.3.6.1.4.1.2272.1.100.9.2.1.7
rc2kAtmPortLineSpeed
line speed
Enumeration
Enumerated Values:
1oc3c
2oc12c
3ds3
 .1.3.6.1.4.1.2272.1.100.9.2.1.8
rc2kAtmPortLoopBackMode
loop back mode
Enumerationr/w
Enumerated Values:
1off
2internal
3external
4ds3PayloadLoop
5ds3DiagLoop
6ds3LineLoop
 .1.3.6.1.4.1.2272.1.100.9.2.1.9
rc2kAtmPortMacAddress
XLR assigned MAC addr
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.100.9.2.1.10

rc2kAtmPvcTable

table
.1.3.6.1.4.1.2272.1.100.9.3 · 1 row entry · 21 columns
Open in standard view 
ATM Pvc table
rc2kAtmPvcEntry entry .1.3.6.1.4.1.2272.1.100.9.3.1
Entry containing information of ATM Pvc
Indexes
rc2kAtmPvcIfIndex rc2kAtmPvcVpi rc2kAtmPvcVci
Column Syntax OID
rc2kAtmPvcIfIndex
port number
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.9.3.1.1
rc2kAtmPvcVpi
vpi of this pvc
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.2
rc2kAtmPvcVci
vci of this pvc
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2272.1.100.9.3.1.3
rc2kAtmPvcPvcId
internal pvc id
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.3.1.4
rc2kAtmPvcName
name of pvc
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.100.9.3.1.5
rc2kAtmPvcEncapsulation
encapsulation
Enumerationr/w
Enumerated Values:
1null
2llcSnap
 .1.3.6.1.4.1.2272.1.100.9.3.1.6
rc2kAtmPvcServiceType
service type
Enumerationr/w
Enumerated Values:
1ubr
2vbr
 .1.3.6.1.4.1.2272.1.100.9.3.1.7
rc2kAtmPvcPeakCellRate
Peak cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.
Integer32r/w
Constraints:
range: 86-733490
 .1.3.6.1.4.1.2272.1.100.9.3.1.8
rc2kAtmPvcSustainedCellRate
Sustained cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.
Integer32r/w
Constraints:
range: 86-733490
 .1.3.6.1.4.1.2272.1.100.9.3.1.9
rc2kAtmPvcMaxBurstSize
max burst size
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.10
rc2kAtmPvcRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.100.9.3.1.11
rc2kAtmPvcOamLbMgmtEnable
Indicate whether end-to-end F5 OAM loopback is enabled.
When it is enabled, OAM loopback request is sent
periodically
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.9.3.1.12
rc2kAtmPvcOamLbSendFrequency
Number of seconds between transmitting OAM loopback
request
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.13
rc2kAtmPvcOamLbRetryFrequency
Number of seconds between retry
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.14
rc2kAtmPvcOamLbUpCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a
PVC connection state to up
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.15
rc2kAtmPvcOamLbDownCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a
PVC state to down.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.16
rc2kAtmPvcOamTrapEnable
Indicate whether OAM trap is enabled. When it is enabled,
a trap is sent to the management station when
rc2kAtmPvcOamVcStatus is going up or down.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.9.3.1.17
rc2kAtmPvcOamVcStatus
Indicate the status of PVC link.
Not Managed--VC is not being managed by OAM.
Down Verify --An OAM loopback failed. End-to-end F5 OAM
loopback cells are sent at retry frequency to verify
the VC is really down. Afte…
Enumeration
Enumerated Values:
1notManaged
2downVerify
3down
4upVerify
5up
 .1.3.6.1.4.1.2272.1.100.9.3.1.18
rc2kAtmPvcOamLbRequestSent
Number of OAM loopback request sent
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.19
rc2kAtmPvcOamLbReplySent
Number of OAM loopback reply sent
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.20
rc2kAtmPvcOamLbReplyReceived
Number of OAM loopback reply received
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.21

rc2kAtm1483ElanTable

table
.1.3.6.1.4.1.2272.1.100.9.5 · 1 row entry · 18 columns
Open in standard view 
ATM 1483Elan table
rc2kAtm1483ElanEntry entry .1.3.6.1.4.1.2272.1.100.9.5.1
Entry containing information of ATM 1483Elan
Indexes
rc2kAtm1483ElanIfIndex rc2kAtm1483ElanVlanId
Column Syntax OID
rc2kAtm1483ElanIfIndex
port number
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.9.5.1.1
rc2kAtm1483ElanElanId
Elan Id
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.2
rc2kAtm1483ElanNumPvcIds
# pvc-ids in list
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.100.9.5.1.3
rc2kAtm1483ElanPvcIds
list of pvc-ids. each pvc-id is represented by a
32 bit value this field can contain a maximum of
64 pvc-ids.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.100.9.5.1.4
rc2kAtm1483ElanVlanId
vlan tag for this 1483
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.5
rc2kAtm1483ElanRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.100.9.5.1.6
rc2kAtm1483ElanConnectType
connection type
Enumerationr/w
Enumerated Values:
1bridged
2ip
3ipx
4muxIpIpx
 .1.3.6.1.4.1.2272.1.100.9.5.1.7
rc2kAtm1483ElanVlanMacAddress
mac for vlan
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.100.9.5.1.8
rc2kAtm1483ElanDummyMacAddress
dummy mac for the other router
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.100.9.5.1.9
rc2kAtm1483ElanLocalIpAddress
local ip, if ConnectType is ip(2)
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.9.5.1.10
rc2kAtm1483ElanRemoteIpAddress
remote ip, if ConnectType is ip(2)
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.9.5.1.11
rc2kAtm1483ElanInArpSendEnable
enable arp sending on the port, if
ConnectType is ip(2)
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.100.9.5.1.12
rc2kAtm1483ElanInArpSendInterval
interval of arp sending on the port, if
ConnectType is ip(2)
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2272.1.100.9.5.1.13
rc2kAtm1483ElanIpxVlanEncapMethod
vlan encapsulation method, if ConnectType
is ipx(3)
Enumerationr/w
Enumerated Values:
1llc
2snap
3ether-ii
4raw
 .1.3.6.1.4.1.2272.1.100.9.5.1.14
rc2kAtm1483ElanIpxNetworkNum
network number, if ConnectType is ipx(3)
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.15
rc2kAtm1483ElanStgId
An identifier used to identify a STG in the device,
only in bridge mode
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.16
rc2kAtm1483ElanrcStgTaggedBpduVlanId
The VLAN ID to be used for tagging BPDUs,
only in bridge mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.17
rc2kAtm1483ElanIpxNetworkAddr
network number, instead of rc2kAtm1483ElanIpxNetworkNum
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.100.9.5.1.18

rc2kAtmSioCardConfigTable

table
.1.3.6.1.4.1.2272.1.100.9.8 · 1 row entry · 6 columns
Open in standard view 
2kAtm Sio Card Config Table
rc2kAtmSioCardConfigEntry entry .1.3.6.1.4.1.2272.1.100.9.8.1
Entry containing information of 2kAtm Sio Card Config.
Indexes
rc2kAtmSioCardConfigSlotIndex
Column Syntax OID
rc2kAtmSioCardConfigSlotIndex
slot Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.8.1.1
rc2kAtmSioCardConfigAction Enumerationr/w
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.2272.1.100.9.8.1.2
rc2kAtmSioCardConfigTraceMode Enumerationr/w
Enumerated Values:
0other
1traceOn
 .1.3.6.1.4.1.2272.1.100.9.8.1.3
rc2kAtmSioCardConfigImageFileName
ATM Image file name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.2272.1.100.9.8.1.4
rc2kAtmSioCardConfigElanStatsEnable
Enable/Disable Elan Statistics collection
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.100.9.8.1.5
rc2kAtmSioCardConfigStatsPollPeriod
Time interval after which Elan statistics would
be polled
Integer32r/w
Constraints:
range: 3-15
 .1.3.6.1.4.1.2272.1.100.9.8.1.6

rc2kAtmPortStatsTable

table
.1.3.6.1.4.1.2272.1.100.9.10 · 1 row entry · 11 columns
Open in standard view 
ATM port statistics table
rc2kAtmPortStatsEntry entry .1.3.6.1.4.1.2272.1.100.9.10.1
Entry containing information of ATM port statistics
Indexes
rc2kAtmPortStatsIfIndex
Column Syntax OID
rc2kAtmPortStatsIfIndex
port number
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.9.10.1.1
rc2kAtmPortStatsInCells
Number of Cells received from ATM interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.2
rc2kAtmPortStatsOutCells
Number of Cells transmitted by ATM interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.3
rc2kAtmPortStatsOutIdleCells
Number of Idle Cells transmitted
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.4
rc2kAtmPortStatsInHecCorrected
Number of received cells in which HCS
was corrected
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.5
rc2kAtmPortStatsInHecUncorrected
Number of received cells dropped because HCS
couldn't be corrected
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.6
rc2kAtmPortStatsInUnknownProtos
Number of received cells dropped with wrong VPI/VCI
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.7
rc2kAtmPortStatsInPkts
Number of AAL5 CPCS PDUs received
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.8
rc2kAtmPortStatsOutPkts
Number of AAL5 CPCS PDUs transmitted
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.9
rc2kAtmPortStatsInDroppedPkts
Number of AAL5 CPCS PDUs dropped due to
resource exhaustion
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.10
rc2kAtmPortStatsOutDroppedPkts
Number of AAL5 CPCS PDUs dropped because the
transmitter closed the channel
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.11

rc2kAtmVPortStatsTable

table
.1.3.6.1.4.1.2272.1.100.9.11 · 1 row entry · 15 columns
Open in standard view 
ATM Elan statistics table
rc2kAtmVPortStatsEntry entry .1.3.6.1.4.1.2272.1.100.9.11.1
Entry containing information of ATM Elan statistics
Indexes
rc2kAtmVPortStatsIfIndex rc2kAtmVPortStatsVlanId
Column Syntax OID
rc2kAtmVPortStatsIfIndex
port number
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.100.9.11.1.1
rc2kAtmVPortStatsVlanId
Vlan Id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.11.1.2
rc2kAtmVPortStatsClear
Clear Elan Stats
Enumerationr/w
Enumerated Values:
0other
1clear
 .1.3.6.1.4.1.2272.1.100.9.11.1.3
rc2kAtmVPortStatsInOctets
AAL5 CPCS PDU octects received from ATM interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.11.1.4
rc2kAtmVPortStatsOutOctets
AAL5 CPCS PDU octects transmitted out of ATM interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.11.1.5
rc2kAtmVPortStatsInErrors
AAL5 CPCS PDUs received with errors from ATM interface.
These errors include CRC-32 errors,SAR time-out errors
And oversized SDU errors
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.6
rc2kAtmVPortStatsOutErrors
Number of AAL5 CPCS PDUs that couldn't be transmitted
due to errors
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.7
rc2kAtmVPortStatsInDiscards
Number of received AAL5 CPCS PDUs discarded
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.8
rc2kAtmVPortStatsOutDiscards
Number of AAL5 CPCS PDUs which are to be transmitted
but discarded
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.9
rc2kAtmVPortStatsInUcastPkts
Received ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
address
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.10
rc2kAtmVPortStatsOutUcastPkts
Forwarded ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
address
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.11
rc2kAtmVPortStatsInMulticastPkts
Received ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.12
rc2kAtmVPortStatsOutMulticastPkts
Forwarded ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.13
rc2kAtmVPortStatsInBroadcastPkts
Received ethernet/IP/IPX packets whose destination
address in broadcast address
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.14
rc2kAtmVPortStatsOutBroadcastPkts
Forwarded ethernet/IP/IPX packets whose destination
address in broadcast address
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.15

rc2kCpuEthernetPortIpv6RouteTable

table
.1.3.6.1.4.1.2272.1.100.13 · 1 row entry · 4 columns
Open in standard view 
2k CPU Ethernet Port Route table for Ipv6
rc2kCpuEthernetPortIpv6RouteEntry entry .1.3.6.1.4.1.2272.1.100.13.1
Entry containing information of 2k CPU Ethernet Port Ipv6
Indexes
rc2kCpuEthernetPortIpv6RouteNetwork rc2kCpuEthernetPortIpv6RoutePrefixLength rc2kCpuEthernetPortIpv6RouteGateway
Column Syntax OID
rc2kCpuEthernetPortIpv6RouteNetwork
Used to configure the ipv6 network that can be
used to remotely manage this device.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.100.13.1.1
rc2kCpuEthernetPortIpv6RoutePrefixLength
The length of the prefix (in bits).
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.13.1.2
rc2kCpuEthernetPortIpv6RouteGateway
Used to configure the the IPv6 address of the
gateway that should be used to forward IPv6
traffic.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.100.13.1.3
rc2kCpuEthernetPortIpv6RouteRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.100.13.1.4

rc2kPowerConsumptionInfoTable

table
.1.3.6.1.4.1.2272.1.100.17 · 1 row entry · 7 columns
Open in standard view 
Power consumption info table for all slots
rc2kPowerConsumptionInfoEntry entry .1.3.6.1.4.1.2272.1.100.17.1
Entry containing power consumption information of
the slot
Indexes
rc2kPowerConsumptionInfoIndex
Column Syntax OID
rc2kPowerConsumptionInfoIndex
Slot number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.100.17.1.1
rc2kPowerConsumptionInfoPowerStatus
Power operation status of this slot
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2272.1.100.17.1.2
rc2kPowerConsumptionInfoBasePower
The base power required for this slot
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.17.1.3
rc2kPowerConsumptionInfoConsumedPower
The actual consumed power of this slot.
Value will be set zero when Power status is 'off'
rc2kPowerConsumptionInfoPowerStatus
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.17.1.4
rc2kPowerConsumptionInfoPowerPriority
Used to indicate the priority of the slot for power
management
Enumeration
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.17.1.5
rc2kPowerConsumptionInfoSlotDescription
User to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.17.1.6
rc2kPowerConsumptionInfoCardDescription
Hardware description of this card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.17.1.7

rc2kTemperatureTable

table
.1.3.6.1.4.1.2272.1.100.18 · 1 row entry · 11 columns
Open in standard view 
Table for retrieving the temperatures 
of each card (CP, IO, SF) on the chassis
rc2kTemperatureEntry entry .1.3.6.1.4.1.2272.1.100.18.1
Contains information regarding the temperature of
each slot (CP, IO and SF) on the chassis
Indexes
rc2kTemperatureSlotIndex
Column Syntax OID
rc2kTemperatureSlotIndex
Slot number of either a CP (1,2) or IO (3-12)
or SF (21-26).
Integer32
Constraints:
range: 1-12
range: 21-26
 .1.3.6.1.4.1.2272.1.100.18.1.1
rc2kTemperatureSlotDescription
Used to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.18.1.2
rc2kTemperatureZone1Temperature
Zone 1 temperature measured in celsius degree
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.3
rc2kTemperatureZone2Temperature
Zone 2 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 2 is not available on this slot.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.4
rc2kTemperatureZone3Temperature
Zone 3 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 3 is not available on this slot.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.5
rc2kTemperatureZone4Temperature
Zone 4 temperature measured in celsius degree
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.6
rc2kTemperatureZone5Temperature
Zone 5 2 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 5 is not available on this slot.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.7
rc2kTemperatureHighTemperature
Highest temperature measured in celsius degree
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.8
rc2kTemperatureLowTemperature
Lowest temperature measured in celsius degree
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.9
rc2kTemperatureAlarmThreshold
When the card temperature crosses this
threshold, an alarm will be set.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.10
rc2kTemperatureShutdownThreshold
When the card temperature crosses this
threshold, the card will be shutdown.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.11

rcPrQosPolicyTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.2 · 1 row entry · 6 columns
Open in standard view 
A list of GPID entries. The number of entries is
given by rcPrQosPolicyNumPolicies.
rcPrQosPolicyEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.2.1
Entry containing configuration information for a
particular global policer.
Indexes
rcPrQosPolicyGpId
Column Syntax OID
rcPrQosPolicyGpId
A value that uniquely identifies Global Policer
associated with this entry.
Integer32
Constraints:
range: 1-16000
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1
rcPrQosPolicyName
An administratively-assigned name for this Global
Policer.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2
rcPrQosPolicyPeakRate
Global Policer Peak Rate in Kilobit/sec.
Integer32r/w
Constraints:
range: 64-5000000
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3
rcPrQosPolicySvcRate
Global Policer Service Rate in Kilobit/sec.
Integer32r/w
Constraints:
range: 64-5000000
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4
rcPrQosPolicyLaneMembers
The set of lanes that are members of this Global
Policer. The string is 4 octets long, for a total
of 32 bits. Each bit corresponds to a laneId.
Each I/O slot has 4 laneIds. When a bit has the
value one(1), the co…
LaneSetr/w
Textual Convention: LaneSet OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5
rcPrQosPolicyRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6

rcPrQosLocalPolicyTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.3 · 1 row entry · 17 columns
Open in standard view 
A list of policer entries.
rcPrQosLocalPolicyEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.3.1
An entry containing configuration information for
a particular local policer. This field will
return 0 for CB as tap.lane.lpid is not used.
Indexes
rcPrQosLocalPolicyGpId rcPrQosLocalPolicyIndex
Column Syntax OID
rcPrQosLocalPolicyGpId
A value of Global Policer ID corresponding to this
local policer.
Integer32
Constraints:
range: 1-16000
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1
rcPrQosLocalPolicyIndex
The slot number of the VSP chassis on which
stats are collected. Valid slots are IO slots
which are in slots 3 to 12.
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2
rcPrQosLocalPolicyPeakRate
Global Peak Rate in Kilobit/sec.
Integer32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3
rcPrQosLocalPolicySvcRate
Global Policer Service Rate in Kilobit/sec.
Integer32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4
rcPrQosLocalPolicyTotalPkts
Global Policer Total Packets Count.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5
rcPrQosLocalPolicyTotalBytes
Global Policer Total Bytes Count.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6
rcPrQosLocalPolicyBytesOverPeak
Global Policer Bytes over Peak Rate Count.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7
rcPrQosLocalPolicyBytesOverSvc
Global Policer Bytes over Service Rate Count.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8
rcPrQosLocalPolicyTotalPktsDropped
The count of Global Policer Total Packets dropped
due to reasons other than policing, e.g. congestion.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9
rcPrQosLocalPolicyLaneMember
The lane that this Gpid has a local policing
account on
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10
rcPrQosLocalPolicyGreenPackets
The total number of packets received
that were below committed rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11
rcPrQosLocalPolicyGreenBytes
The total number of bytes received
that were below the committed rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12
rcPrQosLocalPolicyYellowPackets
The total number of packets received
that were above the committed rate but
below the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13
rcPrQosLocalPolicyYellowBytes
The total number of bytes received
that were above the committed rate but
below the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14
rcPrQosLocalPolicyRedPackets
The total number of packets received
that were above the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15
rcPrQosLocalPolicyRedBytes
The total number of bytes received
that were above the peak rate.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16
rcPrQosLocalPolicyStatsClear
Clear Qos Policy statistics.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17

rcPrQosTxQueueTemplateTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.4 · 1 row entry · 17 columns
Open in standard view 
A list of egress queue templates. The number of 
templates is given by rcPrQosTxQueueNumTemplates.
rcPrQosTxQueueTemplateEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.4.1
Entry containing configuration information for a
particular egress queue template. Queue is a set of
egress queues.
Indexes
rcPrQosTxQueueTemplateId
Column Syntax OID
rcPrQosTxQueueTemplateId
A value that uniquely identifies Egress Queue
Template.
Integer32
Constraints:
range: 1-386
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1
rcPrQosTxQueueTemplateName
An administratively-assigned name for this egress
Queue Template.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2
rcPrQosTxQueueTemplateMaxQueues
Maximum number of queues in this Template.
Enumerationr/w
Enumerated Values:
8eight
64sixtyfour
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3
rcPrQosTxQueueTemplateBalancedQueues
Total number of Balanced Queues in this Template.
Integer32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4
rcPrQosTxQueueTemplateHiPriQueues
Total number of High Priority Queues in this
Template.
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5
rcPrQosTxQueueTemplateLoPriQueues
Total number of Low Priority Queues in this Template.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6
rcPrQosTxQueueTemplateTotalQueues
Total number of queues in this Template.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7
rcPrQosTxQueueTemplateBalancedQList
List of Balanced Queues in this Template.
OctetString
Constraints:
range: 0-200
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8
rcPrQosTxQueueTemplateHiPriQList
List of High Priority Queues in this Template.
OctetString
Constraints:
range: 0-200
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9
rcPrQosTxQueueTemplateLoPriQList
List of Low Priority Queues in this Template.
OctetString
Constraints:
range: 0-200
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10
rcPrQosTxQueueTemplateTotalQLists
List of Total Physical Queues in this Template.
OctetString
Constraints:
range: 0-600
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11
rcPrQosTxQueueTemplateMinRateTotal
Sum of minimum rate guarantees for this template.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12
rcPrQosTxQueueTemplateMaxRateHiPri
Sum of maximum rate guarantees for high priority
queues of this template.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13
rcPrQosTxQueueTemplatePortMembers
Port members of this template.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14
rcPrQosTxQueueTemplateFlags
Bitset indicated template state.
Enumerationr/w
Enumerated Values:
1created
2committed
3modified
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15
rcPrQosTxQueueTemplateApply
When apply is issued by the administrator,
the Egress Queue Set attributes are committed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16
rcPrQosTxQueueTemplateRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17

rcPrQosTxQueueTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.5 · 1 row entry · 11 columns
Open in standard view 
A list of elementary Egress queue entries.
rcPrQosTxQueueEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.5.1
Entry containing configuration information for a
particular elementary egress queue.
Indexes
rcPrQosTxQueueTid rcPrQosTxQueueQid
Column Syntax OID
rcPrQosTxQueueTid
Template ID of the template this queue belongs to.
Integer32r/w
Constraints:
range: 1-386
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1
rcPrQosTxQueueQid
Queue Offset from the base queue for this port.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2
rcPrQosTxQueueName
An NNSC name for this egress queue. Allowed only
for 8 NNSC queues.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3
rcPrQosTxQueueStyle
Egress queue style.
Enumerationr/w
Enumerated Values:
1hipri
2balanced
3lopri
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4
rcPrQosTxQueueWeight
Egress queue weight.
Applicable for balanced queues and lo-pri queues only.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5
rcPrQosTxQueueMaxRate
Egress queue maximum rate, Kbs
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6
rcPrQosTxQueueMinRate
Egress queue minimun rate guarantee, Kbs.
Applicable for balanced queues and lo-pri queues only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7
rcPrQosTxQueueBquantum
Bandwidth allocation unit.
Applicable for balanced queues and lo-pri queues only.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8
rcPrQosTxQueueMaxLength
Maximum queue length.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9
rcPrQosTxQueueWredCurveSet
Random Early Detection Number.
Enumerationr/w
Enumerated Values:
1tailDrop
2lowDrop
3mediumDrop
4highDrop
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10
rcPrQosTxQueueRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11

rcPrQosTxQueueStatsTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.6 · 1 row entry · 5 columns
Open in standard view 
A list of elementary Egress queue stats entries.
rcPrQosTxQueueStatsEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.6.1
Entry containing statistics information for a
particular elementary egress queue.
Indexes
rcPrQosTxQueueStatsPort rcPrQosTxQueueStatsQid
Column Syntax OID
rcPrQosTxQueueStatsPort
Port index of the stats table.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1
rcPrQosTxQueueStatsQid
Queue Offset from the base queue for this port.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2
rcPrQosTxQueueStatsTotalPages
Total pages offered to the queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3
rcPrQosTxQueueStatsDroppedPages
Total pages dropped by the queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4
rcPrQosTxQueueStatsUtilization
Utilization percentage of the queue.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5

rcPrQosIngressExpToQosTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.7 · 1 row entry · 2 columns
Open in standard view 
This table is used to specify the Mpls EXP to
QOS (Exp bit->QOS) mapping on packet ingress.
rcPrQosIngressExpToQosEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.7.1
Entry containing information of Exp bit->Qos mapping
Indexes
rcPrQosIngressExpToQosIndex
Column Syntax OID
rcPrQosIngressExpToQosIndex
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1
rcPrQosIngressExpToQosRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4

rcPrQosEgressQosToExpTable

table
.1.3.6.1.4.1.2272.1.202.1.1.1.8 · 1 row entry · 2 columns
Open in standard view 
This table is used to specify the QOS to
Mpls EXP bit field (QOS->Exp bit) mapping on packet
egress.
rcPrQosEgressQosToExpEntry entry .1.3.6.1.4.1.2272.1.202.1.1.1.8.1
Entry containing information of Qos->Exp bit mapping
Indexes
rcPrQosEgressQosToExpIndex
Column Syntax OID
rcPrQosEgressQosToExpIndex
Used to uniquely identify a row in this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1
rcPrQosEgressQosToExpRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4

rcPrFilterActTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.2.1 · 1 row entry · 9 columns
Open in standard view 
A table of Acts to store information of each Act
entry. This table is indexed by the Act Id.
rcPrFilterActEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1
One Act Entry holding Act information.
Indexes
rcPrFilterActId
Column Syntax OID
rcPrFilterActId
A table of Acts to store information of each
Act. This table is indexed by the Act Id.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1
rcPrFilterActName
A descriptive name chosen by the administrator
for the Act Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2
rcPrFilterActArpAttrs
Value is one or multiple (logical 'OR' of the
following):
none(0),
operation(1)
none: No Arp Attrs are selected or to clear
other choices.
operation: Only valid option for Arp attributes.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3
rcPrFilterActEthernetAttrs
Value is one or multiple of the following:
none(0),
srcMac(1),
dstMac(2),
etherType(4),
port(8),
vlan(16),
vlanTagPrio(32)
none: If selected then unselect all other selections.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4
rcPrFilterActIpAttrs
Value is one or multiple of the following:
none(0),
srcIp(1),
dstIp(2),
ipFragFlag(4),
ipOptions(8),
ipProtoType(16),
dscp(32)
none: If selected then unselect all other selections.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5
rcPrFilterActProtocolAttrs
Value is one or multiple of the following:
none(0),
tcpSrcPort(1),
udpSrcPort(2),
tcpDstPort(4),
udpDstPort(8),
tcpFlags(16),
icmpMsgType(32)
none: If selected then unselect all other selections.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6
rcPrFilterActApply
When apply is issued by the administrator,
the ACT attributes cannot be modified.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7
rcPrFilterActRowStatus
Create/delete operations for this entry. The
entry cannot be modified or deleted while there
are Acls configured with this Act entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8
rcPrFilterActIpv6Attrs
Value is one or multiple of the following:
none(0),
srcIpv6(1),
dstIpv6(4),
nextHdr(16),
none: If selected then unselect all other selections.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9

rcPrFilterActPatternTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.2.2 · 1 row entry · 7 columns
Open in standard view 
A table of user-defined parameters of  Acls to
store information of each Acl. This table is indexed
by the Act Id and PatternIndex.
rcPrFilterActPatternEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1
Entry containing Configuration information for a
particular Act.
Indexes
rcPrFilterActPatternActId rcPrFilterActPatternIndex
Column Syntax OID
rcPrFilterActPatternActId
An index to the ActPatternEntry, a unique
identifier for Act entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1
rcPrFilterActPatternIndex
Indexes each user defined field pattern in an
Acl entry. In this release only 3 patterns are
allowed per ACT but we can have multiple
patterns per ACL.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2
rcPrFilterActPatternName
A descriptive name chosen by the administrator for
the Acl Pattern Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3
rcPrFilterActPatternBase
User defined fields from headers to be used in
the Aces of the Acl.
Enumerationr/w
Enumerated Values:
0none
1etherBegin
2macDstBegin
3macSrcBegin
4ethTypeLenBegin
5arpBegin
6ipHdrBegin
7ipOptionsBegin
8ipPayloadBegin
9ipTosBegin
10ipProtoBegin
11ipSrcBegin
12ipDstBegin
13tcpBegin
14tcpSrcportBegin
15tcpDstportBegin
16tcpFlagsEnd
17udpBegin
18udpSrcportBegin
19udpDstportBegin
20etherEnd
21ipHdrEnd
22icmpMsgBegin
23tcpEnd
24udpEnd
25ipv6HdrBegin
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4
rcPrFilterActPatternOffset
Set Offset in bytes to the beginning offset of the user
defined field with selected header option as base.
Integer32r/w
Constraints:
range: 0-25
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5
rcPrFilterActPatternLength
The number of bytes to extract beginning from the
offset is set in rcPrFilterActPatternLength.
Only 1-15 are valid.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6
rcPrFilterActPatternRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7

rcPrFilterAclTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.3.1 · 1 row entry · 16 columns
Open in standard view 
A table of Acls to store information of each Acl.
This table is indexed by the Acl Id.
rcPrFilterAclEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1
Entry containing Configuration information for
a particular Acl.
Indexes
rcPrFilterAclId
Column Syntax OID
rcPrFilterAclId
A unique identifier for Acl entry in the range
of Table Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1
rcPrFilterAclName
A descriptive name chosen by the administrator for
the Acl Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3
rcPrFilterAclType
An Acl can be vlan-based or port-based. An Ace
has a capability to match packets classified as
'ingress' and 'egress'. An ingress packet is
assigned a value 'in' and an egress packet is
assigned a value 'out'.
Enumerationr/w
Enumerated Values:
1inVlan
2outVlan
3inPort
4outPort
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4
rcPrFilterAclAceListSize
Indicates the number of Aces in a particular Acl.
Integer32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5
rcPrFilterAclDefaultAction
Indicates action to be taken when none of the
Aces in the Acl match.
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6
rcPrFilterAclState
Enables/Disables the state of all Aces in the Acl
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8
rcPrFilterAclVlanList
An array used to indicate all the VLANs to be
associated with this Acl Entry. At present, only 4k
Vlans are supported.
OctetStringr/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9
rcPrFilterAclPortList
Indicates the ports to be added to this Acl Entry.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10
rcPrFilterAclRowStatus
Create/delete operations for the entry. Deleting
a non-empty Acl results in deletion of member Aces
and then the Acl.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11
rcPrFilterAclNumVlanIds
Used to Indicate the number of VLAN ID's that
are stored in the rcPrFilterAclVlanList.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12
rcPrFilterAclPktType
Indicates the packet type that thsi ACL is
applicable to.
Enumerationr/w
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13
rcPrFilterAclControlPktRule
When the rcPrFilterAclDefaultAction object is set
to deny then control packets follow this rule.
Otherwise, the object value can be ignored.
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14
rcPrFilterAclVlanId
Destination Vlan Id for mirroring the packets.
The value 0 means no vlan is being mirrored.
When the value of rcPrFilterAclVlanId is non-zero,
the values of rcPrFilterAclMltId and
rcPrFilterAclDstPortList must be 0.
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15
rcPrFilterAclMltId
Destination Mlt Id for mirroring the packets.
The value 0 means no mlt is being mirrored.
When the value of rcPrFilterAclMltId is non-zero,
the values of rcPrFilterAclVlanId and
rcPrFilterAclDstPortList must be 0.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16
rcPrFilterAclDstPortList
Destination Port List for mirroring the packets.
The value 0 means no port(s) is being mirrored.
When the value of rcPrFilterAclDstPortList is non-zero,
the values of rcPrFilterAclVlanId and
rcPrFilterAclMltId must be 0.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17
rcPrFilterAclIpfixState
Value indicating whether ipfix option on the
Acl is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18

rcPrFilterAclStatsTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.3.2 · 1 row entry · 10 columns
Open in standard view 
A table of Acls Statistics entries to store the 
Default Acl statistics for each Acl. 
This table is indexed by the Acl Id.
rcPrFilterAclStatsEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1
Entry containing default statistics information for
a particular Acl.
Indexes
rcPrFilterAclStatsAclId
Column Syntax OID
rcPrFilterAclStatsAclId
A unique identifier for Acl entry in the range
of Table Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1
rcPrFilterAclStatsClear
Clear default statistics for ACL Filters.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4
rcPrFilterAclStatsMatchDefaultSecurityPkts
Security packet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5
rcPrFilterAclStatsMatchDefaultSecurityOctets
Security octet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6
rcPrFilterAclStatsMatchDefaultQosPkts
QOS packet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7
rcPrFilterAclStatsMatchDefaultQosOctets
QOS octet count of traffic not matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8
rcPrFilterAclStatsMatchGlobalSecurityPkts
Security packet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9
rcPrFilterAclStatsMatchGlobalSecurityOctets
Security octet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10
rcPrFilterAclStatsMatchGlobalQosPkts
QOS packet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11
rcPrFilterAclStatsMatchGlobalQosOctets
QOS octet count of traffic matching any of the
ACE rules or hits on Default Action where the count bit
is turned on in ACL Global Action.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12

rcPrFilterAceTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.1 · 1 row entry · 25 columns
Open in standard view 
A table of Aces to store information of each Ace
in context of its parent Acl. This is indexed by
AclId and AceId.
rcPrFilterAceEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1
One Ace entry holding Ace information. Ace is a
member of one Acl.
Indexes
rcPrFilterAceAclId rcPrFilterAceId
Column Syntax OID
rcPrFilterAceAclId
An index to the AceEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1
rcPrFilterAceId
AceId uniquely identifies one Ace entry.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2
rcPrFilterAceName
A descriptive name chosen by the administrator.
System automatically assigns a name if the user
has not assigned one.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3
rcPrFilterAceMode
Operating Mode associated with the Ace is effective
on the packets matching this Ace.
Enumerationr/w
Enumerated Values:
0none
1deny
2permit
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4
rcPrFilterAceRemarkDscp
The 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13)…
Enumerationr/w
Enumerated Values:
0phbcs0
8phbcs1
10phbaf11
12phbaf12
14phbaf13
16phbcs2
18phbaf21
20phbaf22
22phbaf23
24phbcs3
26phbaf31
28phbaf32
30phbaf33
32phbcs4
34phbaf41
36phbaf42
38phbaf43
40phbcs5
46phbef
48phbcs6
56phbcs7
256disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5
rcPrFilterAceRemarkDot1Priority
Dot1 Priority as described by Layer 2 standards,
802.1Q, 802.1P.
Enumerationr/w
Enumerated Values:
0zero
1one
2two
3three
4four
5five
6six
7seven
8disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6
rcPrFilterAceRedirectNextHop
Redirect matching IP traffic to the next hop.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7
rcPrFilterAceRedirectUnreach
Set the desired behavior for redirected traffic in
case the specified next-hop is not reachable.
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8
rcPrFilterAcePolice
Policing profile Identifier. Set the desired policing
profile identifier. Set the value to 0 when policing
is not desired.
Integer32r/w
Constraints:
range: 0-16000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9
rcPrFilterAceAdminState
Value indicating whether the Ace is enabled.
An Ace can only be modified if it is disabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10
rcPrFilterAceOperState
The current operational state of the Ace.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11
rcPrFilterAceMltIndex
If this action is specified, it will
basically override the mlt-index picked
by the mlt algorithm, when a packet is
being sent out on MLT ports.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18
rcPrFilterAceRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19
rcPrFilterAceIpfixState
Value indicating whether ipfix option on the
Ace is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20
rcPrFilterAceRedirectNextHopIpv6
Redirect matching IPv6 traffic to the next hop.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21
rcPrFilterAceDstPortList
Destination Port List for mirroring the packets.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22
rcPrFilterAceDstVlanId
Destination Vlan to mirror the packets.
Integer32r/w
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23
rcPrFilterAceDstMltId
Destination Mlt to mirror the packets.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24
rcPrFilterAceInternalQos
Internal QOS Level assigned to the packet flow DefVal = 8 is disable
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25
rcPrFilterAceCount
Value indicating whether Count option on the
Ace is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26
rcPrFilterAceLog
Value indicating whether log option on the
Ace is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27
rcPrFilterAceCopytoPcap
Value indicating whether copy to pcap option
on the Ace is enabled.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28
rcPrFilterAceDstIp
Destination IP address to mirror the packets.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29
rcPrFilterAceDstIpTtl
Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl.
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30
rcPrFilterAceDstIpDscp
Dscp value for the mirrored packet when mirror
destination is IP. The 6-bit DSCP field from the
ToS byte in Ipv4 header encodes the PHB information
per DiffServ standards (Refer to DiffServ RFCs 2474).
Set the Dscp to …
Enumerationr/w
Enumerated Values:
0phbcs0
8phbcs1
10phbaf11
12phbaf12
14phbaf13
16phbcs2
18phbaf21
20phbaf22
22phbaf23
24phbcs3
26phbaf31
28phbaf32
30phbaf33
32phbcs4
34phbaf41
36phbaf42
38phbaf43
40phbcs5
46phbef
48phbcs6
56phbcs7
256disable
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31

rcPrFilterAceEthSrcAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.2 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store Ethernet Source MAC
Address Header information of each Ace in context
of its parent Acl.
rcPrFilterAceEthSrcAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1
One Ace entry holding Ace Ethernet Source MAC Address
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceEthSrcAddrAclId rcPrFilterAceEthSrcAddrAceId
Column Syntax OID
rcPrFilterAceEthSrcAddrAclId
An index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1
rcPrFilterAceEthSrcAddrAceId
An index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2
rcPrFilterAceEthSrcAddrList
The list of ethernet source address to match.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3
rcPrFilterAceEthSrcAddrListCount
Count to store the number of discrete ranges
entered for the ethernet src address.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4
rcPrFilterAceEthSrcAddrOper
Operators for Ace Ethernet Source MAC Address.
Enumerationr/w
Enumerated Values:
1eq
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5
rcPrFilterAceEthSrcAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6
rcPrFilterAceEthSrcAddrOperMask
The Mac Address mask value in hex which can
be set for the rcPrFilterAceEthSrcAddrOper when
the option selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthSrcAddrOper
is set to 'eq'. In case of…
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7

rcPrFilterAceEthDstAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.3 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store Ethernet Destination MAC
Address Header information of each Ace in context
of its parent Acl.
rcPrFilterAceEthDstAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1
One Ace entry holding Ace Ethernet Destination
MAC Address information. An Ace is a member of one
Acl.
Indexes
rcPrFilterAceEthDstAddrAclId rcPrFilterAceEthDstAddrAceId
Column Syntax OID
rcPrFilterAceEthDstAddrAclId
An index to the AceEthDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1
rcPrFilterAceEthDstAddrAceId
An index to the AceEthDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2
rcPrFilterAceEthDstAddrList
List of ethernet destination address to
match.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3
rcPrFilterAceEthDstAddrListCount
Count to store the number of discrete ranges
entered for the ethernet dst address.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4
rcPrFilterAceEthDstAddrOper
Operators for Ace Ethernet Destination MAC Address.
Enumerationr/w
Enumerated Values:
1eq
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5
rcPrFilterAceEthDstAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6
rcPrFilterAceEthDstAddrOperMask
The Mac Address mask value in hex which can
be set for the rcPrFilterAceEthDstAddrOper when
the option selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of…
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7

rcPrFilterAceEthEtherTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.4 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store Ethernet Ether Header 
information of each Ace in context of its parent 
Acl.
rcPrFilterAceEthEtherEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1
One Ace entry holding Ace Ethernet Ether
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceEthEtherAclId rcPrFilterAceEthEtherAceId
Column Syntax OID
rcPrFilterAceEthEtherAclId
An index to the AceEthEtherEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1
rcPrFilterAceEthEtherAceId
An index to the AceEthEtherEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2
rcPrFilterAceEthEtherTypeList
EtherType value from ethernet header. For example ARP
uses 0x0806, IP uses 0x0800. The platform support
determines the behavior for 802.1Q/p tagged packets.
The EtherType for 802.1Q tagged frames is 0x8100.
…
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3
rcPrFilterAceEthEtherTypeListCount
Count to store the number of discrete ranges
entered for the ethernet types.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4
rcPrFilterAceEthEtherTypeOper
Ethernet Type Operators.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5
rcPrFilterAceEthEtherRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6

rcPrFilterAceEthVlanTagPrioTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.5 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store Ethernet Vlan Tag 
Priority Header information of each Ace in context 
of its parent Acl.
rcPrFilterAceEthVlanTagPrioEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1
One Ace entry holding Ace Ethernet Vlan Tag Priority
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceEthVlanTagPrioAclId rcPrFilterAceEthVlanTagPrioAceId
Column Syntax OID
rcPrFilterAceEthVlanTagPrioAclId
An index to the AceEthVlanTagPrioEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1
rcPrFilterAceEthVlanTagPrioAceId
An index to the AceEthVlanTagPrioEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2
rcPrFilterAceEthVlanTagPrioVlanTagPrio
Priority bits (3-bit field) from the 802.1Q/p tag.
Enumerationr/w
Enumerated Values:
0zero
1one
2two
3three
4four
5five
6six
7seven
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3
rcPrFilterAceEthVlanTagPrioOper
Operators for Ace Ethernet Vlan Tag Priority.
Enumerationr/w
Enumerated Values:
1eq
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4
rcPrFilterAceEthVlanTagPrioRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5
rcPrFilterAceEthVlanTagPrioOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthVlanTagPrioOper when the option
selected is masked. This object is applicable for
VSP9000. Not for ERS8600
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6

rcPrFilterAceEthPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.6 · 1 row entry · 5 columns
Open in standard view 
A table of Aces to store Ethernet  Port 
Header information of each Ace in context 
of its parent Acl.
rcPrFilterAceEthPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1
One Ace entry holding Ace Ethernet Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceEthPortAclId rcPrFilterAceEthPortAceId
Column Syntax OID
rcPrFilterAceEthPortAclId
An index to the AceEthPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1
rcPrFilterAceEthPortAceId
An index to the AceEthPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2
rcPrFilterAceEthPortPort
Port Number or Port List to match on.
PortSetr/w
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3
rcPrFilterAceEthPortOper
Operator for Ace Ethernet Port.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4
rcPrFilterAceEthPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5

rcPrFilterAceEthVlanIdTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.7 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store Ethernet Vlan Id
Header information of each Ace in context 
of its parent Acl.
rcPrFilterAceEthVlanIdEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1
One Ace entry holding Ace Ethernet Vlan Id
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceEthVlanIdAclId rcPrFilterAceEthVlanIdAceId
Column Syntax OID
rcPrFilterAceEthVlanIdAclId
An index to the AceEthVlanIdEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1
rcPrFilterAceEthVlanIdAceId
An index to the AceEthVlanIdEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2
rcPrFilterAceEthVlanIdVlanIdList
Vlan Id to match on. This is a ERS 8600 supported object.
VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead
OctetStringr/w
Constraints:
range: 4096-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3
rcPrFilterAceEthVlanIdOper
Operator for Ace Ethernet VlanId.
Enumerationr/w
Enumerated Values:
1eq
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4
rcPrFilterAceEthVlanIdRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5
rcPrFilterAceEthVlanIdOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthVlanIdOper when the option
selected is mask. This object is used with
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
replace rcPrFilterAceEthVlanIdVlanIdList
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6
rcPrFilterAceEthVlanIdVlanId
Vlan Id to match on. VSP9000 use this object with
object rcPrFilterAceEthVlanIdOperMask to replace the
rcPrFilterAceEthVlanIdVlanIdList
Integer32r/w
Constraints:
range: 1-4084
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7

rcPrFilterAceArpTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.8 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store Arp Header information
of each Ace in context of its parent Acl.
rcPrFilterAceArpEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1
One Ace entry holding Ace Arp Header information.
Ace is a member of one Acl.
Indexes
rcPrFilterAceArpAclId rcPrFilterAceArpAceId
Column Syntax OID
rcPrFilterAceArpAclId
An index to the AceArpEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1
rcPrFilterAceArpAceId
An index to the AceArpEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2
rcPrFilterAceArpType
Ace Arp Operation.
Enumerationr/w
Enumerated Values:
1operation
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3
rcPrFilterAceArpOper
Operator for Ace Arp Operation.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4
rcPrFilterAceArpValue
Ace Arp can be a request or a response.
Enumerationr/w
Enumerated Values:
1arpRequest
2arpResponse
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5
rcPrFilterAceArpRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6

rcPrFilterAceIpSrcAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.9 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store IP Source Address Header 
information of each Ace in context of its parent Acl.
rcPrFilterAceIpSrcAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1
One Ace entry holding Ace IP Source Address Header
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpSrcAddrAclId rcPrFilterAceIpSrcAddrAceId
Column Syntax OID
rcPrFilterAceIpSrcAddrAclId
An index to the AceIpSrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1
rcPrFilterAceIpSrcAddrAceId
An index to the AceIpSrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2
rcPrFilterAceIpSrcAddrOper
Operators for Ace Ip Source Address.
Enumerationr/w
Enumerated Values:
1eq
9mask
10range
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5
rcPrFilterAceIpSrcAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6
rcPrFilterAceIpSrcAddrIpAddr
IP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7
rcPrFilterAceIpSrcAddrOperMaskRange
The IP Mask value or High IP address based on
object rcPrFilterAceIpSrcAddrOper mask/range
option is selected.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8

rcPrFilterAceIpDstAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.10 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store IP Destination Address 
Header information of each Ace in context of its 
parent Acl.
rcPrFilterAceIpDstAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1
One Ace entry holding Ace IP Destination Address
Header information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpDstAddrAclId rcPrFilterAceIpDstAddrAceId
Column Syntax OID
rcPrFilterAceIpDstAddrAclId
An index to the AceIpDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1
rcPrFilterAceIpDstAddrAceId
An index to the AceIpDstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2
rcPrFilterAceIpDstAddrOper
Operators for Ace IP Destination Address.
Enumerationr/w
Enumerated Values:
1eq
9mask
10range
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5
rcPrFilterAceIpDstAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6
rcPrFilterAceIpDstAddrIpAddr
IP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7
rcPrFilterAceIpDstAddrOperMaskRange
The IP mask value or Hi Ip address based on
object rcPrFilterAceIpDstAddrOper mask/range
option is selected.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8

rcPrFilterAceIpDscpTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.11 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store IP Dscp Header information 
of each Ace in context of its parent Acl.
rcPrFilterAceIpDscpEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1
One Ace entry holding Ace IP Dscp Header information.
An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpDscpAclId rcPrFilterAceIpDscpAceId
Column Syntax OID
rcPrFilterAceIpDscpAclId
An index to the AceIpDscpEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1
rcPrFilterAceIpDscpAceId
An index to the AceIpDscpEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2
rcPrFilterAceIpDscpList
The 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13)…
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3
rcPrFilterAceIpDscpListCount
Count to store the number of discrete ranges
entered for the dscp values.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4
rcPrFilterAceIpDscpOper
Operators for Ace Ip Dscp.
Enumerationr/w
Enumerated Values:
1eq
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5
rcPrFilterAceIpDscpRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6
rcPrFilterAceIpDscpOperMask
The mask value in hex which can be set for the
rcPrFilterAceIpDscpOper when the option
selected is mask. It will be set to 0 or be used
when rcPrFilterAceIpDscpOper is set ro eq
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7

rcPrFilterAceIpProtoTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.12 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store IP Proto Header information 
of each Ace in context of its parent Acl.
rcPrFilterAceIpProtoEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1
One Ace entry holding Ace IP Proto Header information.
An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpProtoAclId rcPrFilterAceIpProtoAceId
Column Syntax OID
rcPrFilterAceIpProtoAclId
An index to the AceIpProtoEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1
rcPrFilterAceIpProtoAceId
An index to the AceIpProtoEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2
rcPrFilterAceIpProtoList
Ip protocol Type from the ip header to be matched.
Valid Ip protocol range is 0..255. Few of the Protocol
Types are enumerated above. In case the desired
protocol number is not available in the enumerated
list set proto…
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3
rcPrFilterAceIpProtoListCount
Count to store the number of discrete ranges
entered for the ethernet protocol ids.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4
rcPrFilterAceIpProtoOper
Operators for Ace Ip Protocols.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5
rcPrFilterAceIpProtoRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6

rcPrFilterAceIpOptionsTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.13 · 1 row entry · 5 columns
Open in standard view 
A table of Aces to store IP Options Header 
information of each Ace in context of its parent Acl.
rcPrFilterAceIpOptionsEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1
One Ace entry holding Ace IP Options Header
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpOptionsAclId rcPrFilterAceIpOptionsAceId
Column Syntax OID
rcPrFilterAceIpOptionsAclId
An index to the AceIpOptionsEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1
rcPrFilterAceIpOptionsAceId
An index to the AceIpOptionsEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2
rcPrFilterAceIpOptionsOptions
Ip options to be matched from the IP Header.
Enumerationr/w
Enumerated Values:
1noOperation
7recordRoute
10experimentalMeasurement
11mtuProbe
12mtuReply
15encode
68timestamp
82traceroute
130baseSecurity
131looseSourceRoute
133extendedSecurity
134commercialSecurity
136streamID
137strictSourceRouting
142experimentalAccessControl
144imiTrafficDescriptor
145extendedIP
147addressExtension
148routeAlert
149selectiveDirectedBroadcast
150nsapAddresses
151dynamicPacketState
152upstreamMulticastPacket
205experimentalFlowControl
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3
rcPrFilterAceIpOptionsOper
Logical Operator - only 'any' is valid at present.
Enumerationr/w
Enumerated Values:
5any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4
rcPrFilterAceIpOptionsRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5

rcPrFilterAceIpFragTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.14 · 1 row entry · 5 columns
Open in standard view 
A table of Aces to store IP Fragmentation Header 
information of each Ace in context of its parent Acl.
rcPrFilterAceIpFragEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1
One Ace entry holding Ace IP Fragmentation Header
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpFragAclId rcPrFilterAceIpFragAceId
Column Syntax OID
rcPrFilterAceIpFragAclId
An index to the AceIpFragEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1
rcPrFilterAceIpFragAceId
An index to the AceIpFragEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2
rcPrFilterAceIpFragFragmentation
Ip Fragmentation bits to be matched from the IP
Header.
Enumerationr/w
Enumerated Values:
0noFragment
1anyFragment
2moreFragment
3unused3
4lastFragment
5unused5
6unused6
7unused7
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3
rcPrFilterAceIpFragOper
Operator for Ip fragmentation.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4
rcPrFilterAceIpFragRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5

rcPrFilterAceProtoTcpSrcPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.15 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store TCP Source Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpSrcPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1
One entry holding Ace Protocol TCP Source Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoTcpSrcPortAclId rcPrFilterAceProtoTcpSrcPortAceId
Column Syntax OID
rcPrFilterAceProtoTcpSrcPortAclId
An index to the AceProtoTcpSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1
rcPrFilterAceProtoTcpSrcPortAceId
An index to the AceProtoTcpSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2
rcPrFilterAceProtoTcpSrcPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3
rcPrFilterAceProtoTcpSrcPortCount
Count to store the number of discrete ranges
entered for the TCP source port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4
rcPrFilterAceProtoTcpSrcPortOper
Operator for Ace Protocol TcpSrcPort.
Enumerationr/w
Enumerated Values:
1eq
2ne
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5
rcPrFilterAceProtoTcpSrcPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6

rcPrFilterAceProtoUdpSrcPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.16 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store UDP Source Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoUdpSrcPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1
One entry holding Ace Protocol UDP Source Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoUdpSrcPortAclId rcPrFilterAceProtoUdpSrcPortAceId
Column Syntax OID
rcPrFilterAceProtoUdpSrcPortAclId
An index to the AceProtoUdpSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1
rcPrFilterAceProtoUdpSrcPortAceId
An index to the AceProtoUdpSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2
rcPrFilterAceProtoUdpSrcPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3
rcPrFilterAceProtoUdpSrcPortCount
Count to store the number of discrete ranges
entered for the UDP source port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4
rcPrFilterAceProtoUdpSrcPortOper
Operator for Ace Protocol UdpSrcPort.
Enumerationr/w
Enumerated Values:
1eq
2ne
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5
rcPrFilterAceProtoUdpSrcPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6

rcPrFilterAceProtoTcpDstPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.17 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpDstPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1
One entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoTcpDstPortAclId rcPrFilterAceProtoTcpDstPortAceId
Column Syntax OID
rcPrFilterAceProtoTcpDstPortAclId
An index to the AceProtoTcpDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1
rcPrFilterAceProtoTcpDstPortAceId
An index to the AceProtoTcpDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2
rcPrFilterAceProtoTcpDstPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3
rcPrFilterAceProtoTcpDstPortCount
Count to store the number of discrete ranges
entered for the TCP dest port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4
rcPrFilterAceProtoTcpDstPortOper
Operator for Ace Protocol TcpDstPort.
Enumerationr/w
Enumerated Values:
1eq
2ne
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5
rcPrFilterAceProtoTcpDstPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6

rcPrFilterAceProtoUdpDstPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.18 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store UDP Dest Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoUdpDstPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1
One entry holding Ace Protocol UDP Dest Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoUdpDstPortAclId rcPrFilterAceProtoUdpDstPortAceId
Column Syntax OID
rcPrFilterAceProtoUdpDstPortAclId
An index to the AceProtoUdpDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1
rcPrFilterAceProtoUdpDstPortAceId
An index to the AceProtoUdpDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2
rcPrFilterAceProtoUdpDstPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3
rcPrFilterAceProtoUdpDstPortCount
Count to store the number of discrete ranges
entered for the UDP dest port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4
rcPrFilterAceProtoUdpDstPortOper
Operator for Ace Protocol UdpDstPort.
Enumerationr/w
Enumerated Values:
1eq
2ne
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5
rcPrFilterAceProtoUdpDstPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6

rcPrFilterAceProtoIcmpMsgTypeTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.19 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store ICMP message type information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoIcmpMsgTypeEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1
One entry holding Ace ICMP message type
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoIcmpMsgTypeAclId rcPrFilterAceProtoIcmpMsgTypeAceId
Column Syntax OID
rcPrFilterAceProtoIcmpMsgTypeAclId
An index to the AceProtoIcmpMsgTypeEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1
rcPrFilterAceProtoIcmpMsgTypeAceId
An index to the AceProtoIcmpMsgTypeEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2
rcPrFilterAceProtoIcmpMsgTypeList
One or a list of Icmp messages to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 255 (reserved).
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3
rcPrFilterAceProtoIcmpMsgTypeCount
Count to store the number of discrete ranges
entered for the ICMP message types.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4
rcPrFilterAceProtoIcmpMsgTypeOper
Operator for Ace Protocol IcmpMsgTypes.
Enumerationr/w
Enumerated Values:
1eq
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5
rcPrFilterAceProtoIcmpMsgTypeRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6

rcPrFilterAceProtoTcpFlagsTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.20 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store TCP Flags information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpFlagsEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1
One entry holding Ace Protocol TCP flags
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoTcpFlagsAclId rcPrFilterAceProtoTcpFlagsAceId
Column Syntax OID
rcPrFilterAceProtoTcpFlagsAclId
An index to the rcPrFilterAceProtoTcpFlagsEntry,
a unique identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1
rcPrFilterAceProtoTcpFlagsAceId
An index to the rcPrFilterAceProtoTcpFlagsEntry,
a unique identifier for Ace entry in the
range of Table Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2
rcPrFilterAceProtoTcpFlagsList
One or a list of Tcp flags to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 63
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3
rcPrFilterAceProtoTcpFlagsCount
Count to store the number of discrete ranges
entered for the TCP flags.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4
rcPrFilterAceProtoTcpFlagsOper
Operator for Ace Protocol TcpFlags.
Enumerationr/w
Enumerated Values:
1eq
6matchAny
7matchAll
8mask
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5
rcPrFilterAceProtoTcpFlagsRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6
rcPrFilterAceProtoTcpFlagsOperMask
The mask value in hex which can be set for the
rcPrFilterAceProtoTcpFlagsOper when the option
selected is mask. It will be set 0x0 when object
rcPrFilterAceProtoTcpFlagsOper is set to eq
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7

rcPrFilterAcePattern1Table

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.21 · 1 row entry · 6 columns
Open in standard view 
A table of pattern fields for Aces to manage the
settings for each user defined field.
rcPrFilterAcePattern1Entry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1
One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.
Indexes
rcPrFilterAcePattern1AclId rcPrFilterAcePattern1AceId
Column Syntax OID
rcPrFilterAcePattern1AclId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1
rcPrFilterAcePattern1AceId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2
rcPrFilterAcePattern1Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3
rcPrFilterAcePattern1Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4
rcPrFilterAcePattern1Oper
Operators for Ace Pattern.
Enumerationr/w
Enumerated Values:
1eq
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5
rcPrFilterAcePattern1RowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6

rcPrFilterAcePattern2Table

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.22 · 1 row entry · 6 columns
Open in standard view 
A table of pattern fields for Aces to manage the
settings for each user defined field.
rcPrFilterAcePattern2Entry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1
One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.
Indexes
rcPrFilterAcePattern2AclId rcPrFilterAcePattern2AceId
Column Syntax OID
rcPrFilterAcePattern2AclId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1
rcPrFilterAcePattern2AceId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2
rcPrFilterAcePattern2Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3
rcPrFilterAcePattern2Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4
rcPrFilterAcePattern2Oper
Operators for Ace Pattern.
Enumerationr/w
Enumerated Values:
1eq
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5
rcPrFilterAcePattern2RowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6

rcPrFilterAcePattern3Table

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.23 · 1 row entry · 6 columns
Open in standard view 
A table of pattern fields for Aces to manage the
settings for each user defined field.
rcPrFilterAcePattern3Entry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1
One Ace entry holding Ace User Defined Pattern
information. Ace is a member of one Acl.
Indexes
rcPrFilterAcePattern3AclId rcPrFilterAcePattern3AceId
Column Syntax OID
rcPrFilterAcePattern3AclId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1
rcPrFilterAcePattern3AceId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2
rcPrFilterAcePattern3Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3
rcPrFilterAcePattern3Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4
rcPrFilterAcePattern3Oper
Operators for Ace Pattern.
Enumerationr/w
Enumerated Values:
1eq
3le
4ge
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5
rcPrFilterAcePattern3RowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6

rcPrFilterAceStatsTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.24 · 1 row entry · 6 columns
Open in standard view 
A table of ACE Statistics Entries to store per-ACE-per-Port
Statistics
rcPrFilterAceStatsEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1
Ace Statistics entry holding per-ACE-per-port Statistics
Indexes
rcPrFilterAceStatsAclId rcPrFilterAceStatsAceId rcPrFilterAceStatsPortId
Column Syntax OID
rcPrFilterAceStatsAclId
An index to the AceStatsEntry, a unique
identifier for Acl entry in the range of Table Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1
rcPrFilterAceStatsAceId
An index to the AceStatsEntry, a unique identifier
for ACE entry in the range of Table Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2
rcPrFilterAceStatsPortId
An index to the AceStatsEntry, a unique identifier
of the portId. This object is not being used in
VSP 9000. It should be alway in VVSP 9000
Integer32
Constraints:
range: 0-703
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3
rcPrFilterAceStatsMatchCountPkts
Count of packets that match this particular Ace on this
particular port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4
rcPrFilterAceStatsMatchCountOctets
Byte count of traffic that match this particular Ace on
this particular port
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5
rcPrFilterAceStatsClear
Clear Per-ACE-Per-Port statistics.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6

rcPrFilterAceEthShowTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.25 · 1 row entry · 18 columns
Open in standard view 
A table of Aces to store Ethernet Header
information of each Ace in context of
its parent Acl.
rcPrFilterAceEthShowEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1
One Ace entry holding Ace Ethernet information.
Ace is a member of one Acl.
Indexes
rcPrFilterAceEthShowAclId rcPrFilterAceEthShowAceId
Column Syntax OID
rcPrFilterAceEthShowAclId
An index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1
rcPrFilterAceEthShowAceId
An index to the AceEthernetEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2
rcPrFilterAceEthShowSrcAddrList
The list of ethernet source address to match.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3
rcPrFilterAceEthShowSrcAddrOper
Operators for Ace Ethernet Source MAC Address.
Enumeration
Enumerated Values:
1eq
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4
rcPrFilterAceEthShowDstAddrList
List of ethernet destination address to
match.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5
rcPrFilterAceEthShowDstAddrOper
Operators for Ace Ethernet Destination MAC Address.
Enumeration
Enumerated Values:
1eq
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6
rcPrFilterAceEthShowEtherTypeList
EtherType value from ethernet header. For example ARP
uses 0x0806, IP uses 0x0800. The platform support
determines the behavior for 802.1Q/p tagged packets.
The EtherType for 802.1Q tagged frames is 0x8100.
…
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7
rcPrFilterAceEthShowEtherTypeOper
Ethernet Type Operators.
Enumeration
Enumerated Values:
1eq
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8
rcPrFilterAceEthShowVlanTagPrio
Priority bits (3-bit field) from the 802.1Q/p tag.
Enumeration
Enumerated Values:
0zero
1one
2two
3three
4four
5five
6six
7seven
255notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9
rcPrFilterAceEthShowVlanTagPrioOper
Operators for Ace Ethernet Vlan Tag Priority.
Enumeration
Enumerated Values:
1eq
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10
rcPrFilterAceEthShowPort
Port Number or Port List to match on.
PortSet
Textual Convention: PortSet OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11
rcPrFilterAceEthShowPortOper
Operator for Ace Ethernet Port.
Enumeration
Enumerated Values:
1eq
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12
rcPrFilterAceEthShowVlanIdOper
Operator for Ace Ethernet VlanId.
Enumeration
Enumerated Values:
1eq
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14
rcPrFilterAceEthShowSrcAddrOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthSrcAddrOper when the option
selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of the prefix…
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15
rcPrFilterAceEthShowDstAddrOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthDstAddrOper when the option
selected is mask. It will be empty or
set to 000000000000 whenrcPrFilterAceEthDstAddrOper
is set to 'eq'. In case of the prefix…
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16
rcPrFilterAceEthShowVlanTagPrioOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthVlanTagPrioOper when the option
selected is masked. This object is applicable for
VSP9000. Not for ERS8600
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17
rcPrFilterAceEthShowVlanIdOperMask
The mask value in hex which can be set for the
rcPrFilterAceEthVlanIdOper when the option
selected is mask. This object is used with
rcPrFilterAceEthVlanIdVlanId in VSP 9000 to
replace rcPrFilterAceEthVlanIdVlanIdList
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18
rcPrFilterAceEthShowVlanId
Vlan Id to match on. VSP9000 use this object with
object rcPrFilterAceEthVlanIdOperMask to replace the
rcPrFilterAceEthVlanIdVlanIdList
Integer32
Constraints:
range: 0-4084
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19

rcPrFilterAceIpShowTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.26 · 1 row entry · 17 columns
Open in standard view 
A table of Aces to store IP Header
information of each Ace in context of
its parent Acl.
rcPrFilterAceIpShowEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1
One Ace entry holding Ace IP information.
Ace is a member of one Acl.
Indexes
rcPrFilterAceIpShowAclId rcPrFilterAceIpShowAceId
Column Syntax OID
rcPrFilterAceIpShowAclId
An index to the AceIpShowEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1
rcPrFilterAceIpShowAceId
An index to the AceIpShowEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2
rcPrFilterAceIpShowSrcAddrOper
Operators for Ace Ip Source Address.
Enumeration
Enumerated Values:
1eq
9mask
10range
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4
rcPrFilterAceIpShowDstAddrOper
Operators for Ace Ip Destination Address.
Enumeration
Enumerated Values:
1eq
9mask
10range
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6
rcPrFilterAceIpShowDscpList
The 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13)…
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7
rcPrFilterAceIpShowDscpOper
Operators for Ace Ip Dscp.
Enumeration
Enumerated Values:
1eq
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8
rcPrFilterAceIpShowProtoList
Ip protocol Type from the ip header to be matched.
Valid Ip protocol range is 0..255. Few of the Protocol
Types are enumerated above. In case the desired
protocol number is not available in the enumerated
list set proto…
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9
rcPrFilterAceIpShowProtoOper
Operators for Ace Ip Protocols.
Enumeration
Enumerated Values:
1eq
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10
rcPrFilterAceIpShowOptions
Ip options to be matched from the IP Header.
Enumeration
Enumerated Values:
1noOperation
7recordRoute
10experimentalMeasurement
11mtuProbe
12mtuReply
15encode
68timestamp
82traceroute
130baseSecurity
131looseSourceRoute
133extendedSecurity
134commercialSecurity
136streamID
137strictSourceRouting
142experimentalAccessControl
144imiTrafficDescriptor
145extendedIP
147addressExtension
148routeAlert
149selectiveDirectedBroadcast
150nsapAddresses
151dynamicPacketState
152upstreamMulticastPacket
205experimentalFlowControl
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11
rcPrFilterAceIpShowOptionsOper
Logical Operator - only 'any' is valid at present.
Enumeration
Enumerated Values:
5any
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12
rcPrFilterAceIpShowFragmentation
Ip Fragmentation bits to be matched from the IP
Header.
Enumeration
Enumerated Values:
0noFragment
1anyFragment
2moreFragment
3unused3
4lastFragment
5unused5
6unused6
7unused7
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13
rcPrFilterAceIpShowFragOper
Operator for Ip fragmentation.
Enumeration
Enumerated Values:
1eq
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14
rcPrFilterAceIpShowSrcAddrIpAddr
IP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15
rcPrFilterAceIpShowSrcAddrOperMaskRange
The IP Mask value or High IP address based on
object rcPrFilterAceIpSrcAddrOper mask/range
option is selected.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16
rcPrFilterAceIpShowDstAddrIpAddr
IP Source Address to match from IP header.
This object is defined and used to replace
the rcPrFilterAceIpSrcAddrList by VSP 9000
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17
rcPrFilterAceIpShowDstAddrOperMaskRange
The IP mask value or Hi Ip address based on
object rcPrFilterAceIpDstAddrOper mask/range
option is selected.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18
rcPrFilterAceIpShowDscpOperMask
The mask value in hex which can be set for the
rcPrFilterAceIpDscpOper when the option
selected is mask. It will be set to 0 or be used
when rcPrFilterAceIpDscpOper is set ro eq
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19

rcPrFilterAceProtoShowTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.27 · 1 row entry · 13 columns
Open in standard view 
A table of Aces to store Protocol Header
information of each Ace in context of
its parent Acl.
rcPrFilterAceProtoShowEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1
One Ace entry holding Ace Ethernet information.
Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoShowAclId rcPrFilterAceProtoShowAceId
Column Syntax OID
rcPrFilterAceProtoShowAclId
An index to the AceProtoShowEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1
rcPrFilterAceProtoShowAceId
An index to the AceProtoShowEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2
rcPrFilterAceProtoShowIcmpMsgTypeList
One or a list of Icmp messages to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 255 (reserved).
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11
rcPrFilterAceProtoShowIcmpMsgTypeOper
Operator for Ace Protocol IcmpMsgTypes.
Enumeration
Enumerated Values:
1eq
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12
rcPrFilterAceProtoShowTcpFlagsList
One or a list of Tcp flags to be matched.
Need to provide strings, number of protocol header
types (pre-defined values plus user-defined headers).
Valid range is 0 to 63
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13
rcPrFilterAceProtoShowTcpFlagsOper
Operator for Ace Protocol TcpFlags.
Enumeration
Enumerated Values:
1eq
6matchAny
7matchAll
8mask
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14
rcPrFilterAceProtoShowSrcPort
Port Number or Port List to match on.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15
rcPrFilterAceProtoShowSrcPortOper
Operator for Ace Protocol SrcPort.
Enumeration
Enumerated Values:
1eq
8mask
9range
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16
rcPrFilterAceProtoShowSrcPortOperMaskRange
The value should be displayed in hex when
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoSrcPortOper is set to 'range'.
('range' is not supported in…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17
rcPrFilterAceProtoShowDstPort
Port Number or Port List to match on.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18
rcPrFilterAceProtoShowDstPortOper
Operator for Ace Protocol DstPort.
Enumeration
Enumerated Values:
1eq
8mask
9range
254notConfigured
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19
rcPrFilterAceProtoShowDstPortOperMaskRange
The value should be displayed in hex when
rcPrFilterAceProtoDstPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoDstPortOper is set to 'range'.
('range' is not supported in…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20
rcPrFilterAceProtoShowTcpFlagsOperMask
The mask value in hex which can be set for the
rcPrFilterAceProtoTcpFlagsOper when the option
selected is mask. It will be set 0x0 when object
rcPrFilterAceProtoTcpFlagsOper is set to eq
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21

rcPrFilterAcePatternShowTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.28 · 1 row entry · 11 columns
Open in standard view 
A table of Aces to store Pattern 1, 2, 3 
Header information of each Ace in context of
its parent Acl.
rcPrFilterAcePatternShowEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1
One Ace entry holding Ace Pattern 1, 2, 3
information. Ace is a member of one Acl.
Indexes
rcPrFilterAcePatternShowAclId rcPrFilterAcePatternShowAceId
Column Syntax OID
rcPrFilterAcePatternShowAclId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-4096
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1
rcPrFilterAcePatternShowAceId
An index to the AcePatternEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2
rcPrFilterAcePatternShowPattern1Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3
rcPrFilterAcePatternShowPattern1Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4
rcPrFilterAcePatternShowPattern1Oper
Operators for Ace Pattern.
Enumeration
Enumerated Values:
1eq
3le
4ge
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5
rcPrFilterAcePatternShowPattern2Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6
rcPrFilterAcePatternShowPattern2Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7
rcPrFilterAcePatternShowPattern2Oper
Operators for Ace Pattern.
Enumeration
Enumerated Values:
1eq
3le
4ge
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8
rcPrFilterAcePatternShowPattern3Name
A descriptive name chosen by the administrator for
the Ace Pattern Entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9
rcPrFilterAcePatternShowPattern3Value
Set the pattern value as numeric string. The numeric
value of each byte is encoded in one octet of the
string. Unused bytes are left at the trailing end of
string. The number of bytes to extract from this string
is set …
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10
rcPrFilterAcePatternShowPattern3Oper
Operators for Ace Pattern.
Enumeration
Enumerated Values:
1eq
3le
4ge
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11

rcPrFilterAceIpv6SrcAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.29 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store IPv6 Source Address Header
information of each Ace in context of its parent Acl.
rcPrFilterAceIpv6SrcAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1
One Ace entry holding Ace IPv6 Source Address Header
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpv6SrcAddrAclId rcPrFilterAceIpv6SrcAddrAceId
Column Syntax OID
rcPrFilterAceIpv6SrcAddrAclId
An index to the AceIpv6SrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1
rcPrFilterAceIpv6SrcAddrAceId
An index to the AceIpv6SrcAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2
rcPrFilterAceIpv6SrcAddrList
The list of ipv6 source address to match from IPv6
header.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3
rcPrFilterAceIpv6SrcAddrListCount
Count to store the number of discrete ranges
entered for the ipv6 src address.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4
rcPrFilterAceIpv6SrcAddrOper
Operators for Ace Ipv6 Source Address.
Enumerationr/w
Enumerated Values:
1eq
2ne
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5
rcPrFilterAceIpv6SrcAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6

rcPrFilterAceIpv6DstAddrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.30 · 1 row entry · 6 columns
Open in standard view 
A table of Aces to store IPv6 Destination Address
Header information of each Ace in context of its
parent Acl.
rcPrFilterAceIpv6DstAddrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1
One Ace entry holding Ace IPv6 Destination Address
Header information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpv6DstAddrAclId rcPrFilterAceIpv6DstAddrAceId
Column Syntax OID
rcPrFilterAceIpv6DstAddrAclId
An index to the AceIpv6DstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1
rcPrFilterAceIpv6DstAddrAceId
An index to the AceIpv6DstAddrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2
rcPrFilterAceIpv6DstAddrList
The list of ipv6 dst address to match from IPv6 header.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3
rcPrFilterAceIpv6DstAddrListCount
Count to store the number of discrete ranges
entered for the IPv6 Destination Address.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4
rcPrFilterAceIpv6DstAddrOper
Operators for Ace IPv6 Destination Address.
Enumerationr/w
Enumerated Values:
1eq
2ne
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5
rcPrFilterAceIpv6DstAddrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6

rcPrFilterAceIpv6NextHdrTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.31 · 1 row entry · 5 columns
Open in standard view 
A table of Aces to store IPv6 Next header
Header information of each Ace in context of its
parent Acl.
rcPrFilterAceIpv6NextHdrEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1
One Ace entry holding Ace IPv6 Next header
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceIpv6NextHdrAclId rcPrFilterAceIpv6NextHdrAceId
Column Syntax OID
rcPrFilterAceIpv6NextHdrAclId
An index to the AceIpv6NextHdrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1
rcPrFilterAceIpv6NextHdrAceId
An index to the AceIpv6NextHdrEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2
rcPrFilterAceIpv6NextHdrNextHdr
The ipv6 next header to look for.
Ipv6NextHdrr/w
Textual Convention: Ipv6NextHdr Enumeration
Type Values:
0hop-by-hop
1icmpv4
2igmpv4
4ipInIp
6tcp
8egp
17udp
41ipv6
43routing
44frag
46rsvp
50ipsecESP
51ipsecAh
58icmpv6
59noNxtHdr
60destOptions
255undefined
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3
rcPrFilterAceIpv6NextHdrOper
Operators for Ace IPv6 Next header.
Enumerationr/w
Enumerated Values:
1eq
2ne
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4
rcPrFilterAceIpv6NextHdrRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5

rcPrFilterAceIpv6ShowTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.32 · 1 row entry · 8 columns
Open in standard view 
A table of Aces to display ipv6
information of each Ace in context of
its parent Acl.
rcPrFilterAceIpv6ShowEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1
One Ace entry holding Ace ipv6 information.
Ace is a member of one Acl.
Indexes
rcPrFilterAceIpv6ShowAclId rcPrFilterAceIpv6ShowAceId
Column Syntax OID
rcPrFilterAceIpv6ShowAclId
An index to the AceIpv6Entry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1
rcPrFilterAceIpv6ShowAceId
An index to the AceIpv6Entry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2
rcPrFilterAceIpv6ShowSrcAddrList
The list of v6 source address to display.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3
rcPrFilterAceIpv6ShowSrcAddrOper
Operators for Ace v6 Source Address.
Enumeration
Enumerated Values:
1eq
2ne
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4
rcPrFilterAceIpv6ShowDstAddrList
List of v6 destination address to display.
OctetString
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5
rcPrFilterAceIpv6ShowDstAddrOper
Operators for Ace v6 Destination Address.
Enumeration
Enumerated Values:
1eq
2ne
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6
rcPrFilterAceIpv6ShowNxtHdrNxtHdr
v6 next hdr to display.
Ipv6NextHdr
Textual Convention: Ipv6NextHdr Enumeration
Type Values:
0hop-by-hop
1icmpv4
2igmpv4
4ipInIp
6tcp
8egp
17udp
41ipv6
43routing
44frag
46rsvp
50ipsecESP
51ipsecAh
58icmpv6
59noNxtHdr
60destOptions
255undefined
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7
rcPrFilterAceIpv6ShowNxtHdrOper
Operator for Ace v6 next hdr.
Enumeration
Enumerated Values:
1eq
2ne
255any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8

rcPrFilterAceProtoSrcPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.33 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store TCP/UDP Source Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoSrcPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1
One entry holding Ace Protocol TCP/UDP Source Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoSrcPortAclId rcPrFilterAceProtoSrcPortAceId
Column Syntax OID
rcPrFilterAceProtoSrcPortAclId
An index to the AceProtoSrcPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1
rcPrFilterAceProtoSrcPortAceId
An index to the AceProtoSrcPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2
rcPrFilterAceProtoSrcPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3
rcPrFilterAceProtoSrcPortCount
Count to store the number of discrete ranges
entered for the TCP source port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4
rcPrFilterAceProtoSrcPortOper
Operator for Ace Protocol SrcPort.
Enumerationr/w
Enumerated Values:
1eq
8mask
9range
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5
rcPrFilterAceProtoSrcPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6
rcPrFilterAceProtoSrcPortOperMaskRange
The value should be displayed in hex when
rcPrFilterAceProtoSrcPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoSrcPortOper is set to 'range'.
('range' is not supported in…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7

rcPrFilterAceProtoDstPortTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.34 · 1 row entry · 7 columns
Open in standard view 
A table of Aces to store TCP Dest Port information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoDstPortEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1
One entry holding Ace Protocol TCP Dest Port
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoDstPortAclId rcPrFilterAceProtoDstPortAceId
Column Syntax OID
rcPrFilterAceProtoDstPortAclId
An index to the AceProtoDstPortEntry, a unique
identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1
rcPrFilterAceProtoDstPortAceId
An index to the AceProtoDstPortEntry, a unique
identifier for Ace entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2
rcPrFilterAceProtoDstPortPort
Port Number or Port List to match on.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3
rcPrFilterAceProtoDstPortCount
Count to store the number of discrete ranges
entered for the TCP dest port.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4
rcPrFilterAceProtoDstPortOper
Operator for Ace Protocol DstPort.
Enumerationr/w
Enumerated Values:
1eq
8mask
9range
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5
rcPrFilterAceProtoDstPortRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6
rcPrFilterAceProtoDstPortOperMaskRange
The value should be displayed in hex when
rcPrFilterAceProtoDstPortOper is set to 'mask'.
This object will be used as a Range high value when
rcPrFilterAceProtoDstPortOper is set to 'range'.
('range' is not supported in…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7

rcPrFilterAceProtoTcpOptionTable

table
.1.3.6.1.4.1.2272.1.202.1.1.2.4.35 · 1 row entry · 5 columns
Open in standard view 
A table of Aces to store TCP Option information
of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpOptionEntry entry .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1
One entry holding Ace Protocol TCP option
information. An Ace is a member of one Acl.
Indexes
rcPrFilterAceProtoTcpOptionAclId rcPrFilterAceProtoTcpOptionAceId
Column Syntax OID
rcPrFilterAceProtoTcpOptionAclId
An index to the rcPrFilterAceProtoTcpOptionEntry,
a unique identifier for Acl entry in the range of Table
Size.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1
rcPrFilterAceProtoTcpOptionAceId
An index to the rcPrFilterAceProtoTcpOptionEntry,
a unique identifier for Ace entry in the
range of Table Size.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2
rcPrFilterAceProtoTcpOptionHeader
TCP options to be matched from the TCP Header.
1 No-Operation
2 MaximumSegmentSize
3 WSOPT - Window Scale
4 SACK Permitted
5 SACK
8 TSOPT - Time Stamp Option
9 Partial Order Connection Permitted
10 Partial …
Enumerationr/w
Enumerated Values:
1no-operation
2max-segment-size
3wsopt
4sack-permitted
5sack
8tsopt
9partial-order-conn-perm
10partial-order-service-profile
11cc
12cc-new
13cc-echo
14tcp-alt-checksum-req
15tcp-alt-checksum-data
19md5
27quick-start-resp
28user-timeout-opt
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3
rcPrFilterAceProtoTcpOptionOper
Logical Operator - only 'any' is valid at present.
Enumerationr/w
Enumerated Values:
5any
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4
rcPrFilterAceProtoTcpOptionRowStatus
Create/delete operations for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5

rcVrfConfigTable

table
.1.3.6.1.4.1.2272.1.203.1.1.1.2 · 1 row entry · 10 columns
Open in standard view 
This table is for creating the new Virtual Routers.
rcVrfConfigEntry entry .1.3.6.1.4.1.2272.1.203.1.1.1.2.1
The entries in this table can be added/deleted
using the rcVrfRowStatus.
Indexes
rcVrfId
Column Syntax OID
rcVrfId
The unique id of this virtual router instance. A Virtual
Router cannot not be created with rcVrfId = 0.
VRFID 0 is reserved for the Administrative VRF.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1
rcVrfRowStatus
The status column has three defined values:

- `active', which indicates that the conceptual row is
available for use by the managed device;
- `createAndGo', which is supplied by a management
station wishi…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2
rcVrfName
The Name of the Virtual Router.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3
rcVrfContextName
The SNMPv2 Community String or SNMPv3 contextName
denotes the VRF 'context' and is used to logically
separate the MIB module management.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4
rcVrfTrapEnable
This objects is used to enable the generation
of the VrfUp and VrfDown traps.
true(1) - VRF Traps Enabled
false(2) - VRF Traps Disabled
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5
rcVrfMaxRoutes
This object specifies the maximum number of routes that
this VRF can support. The default value is 10000.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6
rcVrfAdminStatus
The administrative state of the Virtual Router.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
4unknown
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7
rcVrfVpnId
The Virtual Private Network Identifier of the Virtual
Router.
VPNIdr/w
Textual Convention: VPNId OctetString
Type Constraints:
range: 7
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8
rcVrfRpTrigger
This object represents Routing Protocol (RP)
Triggers on a Virtual Router and it meant to
be used to initiate or shutdown routing
protocols on a VRF. Multiple RPs can be acted
on simultaneously. Also, individual RPs c…
VrfRpTriggerBitCoder/w
Textual Convention: VrfRpTriggerBitCode Bits
Type Values:
0rip
1ospf
2bgp
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9
rcVrfMaxRoutesTrapEnable
This objects is used to enable the generation
of the VRF Max Routes Exceeded traps.
true(1) - VRF Max Routes Exceeded Traps Enabled
false(2) - VRF Max Routes Exceeded Traps Disabled
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10

rcVrfStatTable

table
.1.3.6.1.4.1.2272.1.203.1.1.2.2 · 1 row entry · 7 columns
Open in standard view 
This table contains statistics for the Virtual Router.
rcVrfStatEntry entry .1.3.6.1.4.1.2272.1.203.1.1.2.2.1
Entries in this table are per rcVrfId.
Indexes
rcVrfId
Column Syntax OID
rcVrfStatRouteEntries
Total number of routes for this VRF.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1
rcVrfStatFIBEntries
Total number of FIB Entries for this VRF.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2
rcVrfStatUpTime
The time in (in hundredths of a second) since
this VRF entry has been operational.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3
rcVrfOperStatus
The operational status of the Virtual Router.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4
rcVrfRpStatus
This object represents the status of Routing
Protocols on this VRF corresponding to the list
of RP specified in rcVrfRpTrigger.

The BITS represent an Action-code that specifies
the status of the RPs.
The …
VrfRpTriggerBitCode
Textual Convention: VrfRpTriggerBitCode Bits
Type Values:
0rip
1ospf
2bgp
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5
rcVrfRouterAddressType
Router Address Type of this VRF.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6
rcVrfRouterAddress
Router Address of this VRF. It is derived from one of the
interfaces. If loopback interface is present, the loopback
interface address can be used. However, loopback interface
is optional.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7

rcVrfIpVpnTable

table
.1.3.6.1.4.1.2272.1.203.1.1.4 · 1 row entry · 7 columns
Open in standard view 
Table required to configure vpn under ip.
rcVrfIpVpnTableEntry entry .1.3.6.1.4.1.2272.1.203.1.1.4.1
Entries in this table are per rcVrfId.
Indexes
rcVrfIpVpnVrfId
Column Syntax OID
rcVrfIpVpnVrfId
The VrfId serves as the Index for the rcIpVpnVrfTable and
also for the rcIpVpnRouteDistinguisherTable. It allows to
connect to the vrf table to obtain other attributes like the
vrf name, rcVrfMaxRoutesTrapEnable etc.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.1
rcVrfIpVpnStatus
The status of IpVpn.
EnableValuer/w
Textual Convention: EnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.2
rcVrfIpVpnImportRTList
The Import RT list is a list of all the route-targets
attached to a particular vrf behaving in the import mode.
IdListr/w
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.3
rcVrfIpVpnExportRTList
The Export RT list is a list of all the route-targets
attached to a particular vrf in the export mode.
IdListr/w
Textual Convention: IdList OctetString
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.4
rcVrfIpVpnSvcLblAllocOpt
The service label allocation option for the ipvpn
Enumerationr/w
Enumerated Values:
1perVrfperNexthop
2perVrf
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.5
rcVrfIpVpnRowStatus
RowStatus for the Vpn Entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.6
rcVrfIpVpnIsidNumber
IP VPN I-SID number.Default 0 value indicates
that no i-sid has been assinged.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.7

rcVrfNameTable

table
.1.3.6.1.4.1.2272.1.203.1.1.5 · 1 row entry · 2 columns
Open in standard view 
This table is for EDM and SNMP agent to get source vrf name
for inter-vrf route redistribute.
rcVrfNameEntry entry .1.3.6.1.4.1.2272.1.203.1.1.5.1
Each entry has the vrfid and name for source vrf needed by
inter-vrf route redistribute.
Indexes
rcVrfNameVrfId
Column Syntax OID
rcVrfNameVrfId
The unique id of this virtual router instance.
VrfIdentifier
Textual Convention: VrfIdentifier Unsigned32
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.2272.1.203.1.1.5.1.1
rcVrfNameVrfName
The Name of the Virtual Router.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.203.1.1.5.1.2

rcCbQueuingEngine2kTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.2 · 1 row entry · 2 columns
Open in standard view 
Table containing the 2k based queuing engine
entries for the system.
rcCbQueuingEngine2kEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.2.1
Entry for the QE Table
Indexes
rcCbQueuingEngine2kId
Column Syntax OID
rcCbQueuingEngine2kId
Index for an entry in the QE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
IO on slot 3: 1..3
IO on slot 4: 4..6
CP on slot 1: 7
CP on slot 2: …
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1
rcCbQueuingEngine2kStatus
Status of a given QE interface.
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2

rcCbSwitchingEngine4kTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.3 · 1 row entry · 2 columns
Open in standard view 
Table containing the 4k based switching
engine entries for the system.
rcCbSwitchingEngine4kEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.3.1
Entry for the SE Table.
Indexes
rcCbSwitchingEngine4kId
Column Syntax OID
rcCbSwitchingEngine4kId
Index for the SE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
SF on slot 13: 1..3
SF on slot 14: 4..6
...
SF on slot 18: 16..18
Integer32
Constraints:
range: 1-18
 .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1
rcCbSwitchingEngine4kStatus
Status of a given SE Device.
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2

rcCbSwitchingEngine9600Table

table
.1.3.6.1.4.1.2272.1.204.1.1.1.4 · 1 row entry · 3 columns
Open in standard view 
Table containing the 9600 based switching
engine entries for the system.
rcCbSwitchingEngine9600Entry entry .1.3.6.1.4.1.2272.1.204.1.1.1.4.1
Entry for the SE 9600 Table.
Indexes
rcCbSwitchingEngine9600Id
Column Syntax OID
rcCbSwitchingEngine9600Id
Index for the SE Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
SF on slot 21: 1..2
SF on slot 22: 3..4
...
SF on slot 26: 11..12
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1
rcCbSwitchingEngine9600Status
Status of a given Fast SE Device.
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2
rcCbSwitchingEngine9600Mode
Mode of given Fast SE Device either BME or SE.
SfDeviceMode
Textual Convention: SfDeviceMode Enumeration
Type Values:
1other
2bme
3se
 .1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3

rcCbQe2kSerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.5 · 1 row entry · 5 columns
Open in standard view 
Table containing the Serdes Link Information
for the system.
rcCbQe2kSerdesLinkEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.5.1
Entry for a QE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
rcCbQe2kSerdesLinkId
Column Syntax OID
rcCbQe2kSerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Here's the mapping:

rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1
...
rcCbQe2kSerdesLinkId 20 = port 19; Slot 3; QE Devi…
Integer32
Constraints:
range: 1-640
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1
rcCbQe2kSerdesLinkType
Link type of the serdes interface
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2
rcCbQe2kSerdesLinkStatus
Interface Status
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3
rcCbQe2kSerdesLinkConnectedToDevice
The SE/BME ID to which the QE2k ID is attached
to. Note that IDs 16 & 18 are unused.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4
rcCbQe2kSerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 21-26
 .1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5

rcCbSESerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.6 · 1 row entry · 5 columns
Open in standard view 
Table containing the Serdes Link Information
for the system.
rcCbSESerdesLinkEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.6.1
Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
rcCbSESerdesLinkId
Column Syntax OID
rcCbSESerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Here's the mapping:

SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 33 = port 0; Slot 21; Device 2
SESerdesLinkId…
Integer32
Constraints:
range: 1-640
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1
rcCbSESerdesLinkType
Link Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2
rcCbSESerdesLinkStatus
Interface Status
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3
rcCbSESerdesLinkConnectedToDevice
The QE2k ID to which the SE/BME ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4
rcCbSESerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5

rcCbSE9600SerdesLinkTable

table
.1.3.6.1.4.1.2272.1.204.1.1.1.7 · 1 row entry · 5 columns
Open in standard view 
Table containing the Fast Serdes Link Information
for the system.
rcCbSE9600SerdesLinkEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.7.1
Entry for an SE based Serdes Link Interface.
The combination of the QE ID and Serdes Link ID
uniquely identifies a link.
Indexes
rcCbSE9600SerdesLinkId
Column Syntax OID
rcCbSE9600SerdesLinkId
This ID maps to a particular serdes port number
for the identified device. Here's the mapping:

SESerdesLinkId 1 = port 0; Slot 21; Device 1
SESerdesLinkId 97 = port 0; Slot 21; Device 2
SESerdesLink…
Integer32
Constraints:
range: 1-1152
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1
rcCbSE9600SerdesLinkType
Link Type of the Serdes interface. Switch control
interface is sci. Switch forwarding interface is sfi.
Enumeration
Enumerated Values:
1sci
2sfi
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2
rcCbSE9600SerdesLinkStatus
Interface Status
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3
rcCbSE9600SerdesLinkConnectedToDevice
The QE2k ID to which the SE/BME ID is attached to.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4
rcCbSE9600SerdesLinkConnectedToSlot
The slot number of the switch fabric card to which the QE2k ID is attached to.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5

rcCbSPITable

table obsolete
.1.3.6.1.4.1.2272.1.204.1.1.1.8 · 1 row entry · 2 columns
Open in standard view 
Table containing the system peripheral interface info.
rcCbSPIEntry entry .1.3.6.1.4.1.2272.1.204.1.1.1.8.1
SPI table entry
Indexes
rcCbSPIId
Column Syntax OID
rcCbSPIId obsolete
The Index for the SPI Table. Here is the layout
of the IDs in relation to the system:

Location ID(s)
---------------------
Slot 1: 1..6
Slot 2: 7..12
...
Slot 12: 57..72

Current impleme…
Integer32
Constraints:
range: 1-72
 .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1
rcCbSPIStatus obsolete
SPI Status
DeviceStatus
Textual Convention: DeviceStatus Enumeration
Type Values:
1invalid
2down
3up
4disabled
 .1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2

rcVrrpTmpOperationsTable

table
.1.3.6.1.4.1.2272.1.206.1.1.7 · 1 row entry · 15 columns
Open in standard view 
Unified Operations table for a VRRP router which
consists of a sequence (i.e., one or more conceptual
rows) of 'rcVrrpTmpOperationsEntry' items which describe
the operational characteristics of a virtual router.
rcVrrpTmpOperationsEntry entry .1.3.6.1.4.1.2272.1.206.1.1.7.1
An entry in the rcVrrpTmpOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIn…
Indexes
rcVrrpTmpOperationsIfIndex rcVrrpTmpOperationsInetAddrType rcVrrpTmpOperationsVrId
Column Syntax OID
rcVrrpTmpOperationsIfIndex
port interface index.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.1
rcVrrpTmpOperationsInetAddrType
The IP address type of RcVrrpTmpOperationsEntry. This value
applies to both rcVrrpTmpOperationsMasterIpAddr and
rcVrrpTmpOperationsPrimaryIpAddr.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.2
rcVrrpTmpOperationsVrId
This object contains the Virtual Router Identifier
(VRID).
VRRP-MIBVrId
Textual Convention: VRRP-MIBVrId Integer32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.3
rcVrrpTmpOperationsVirtualMacAddr
The virtual MAC address of the virtual router.
Although this object can be derived from the
'rcVrrpTmpOperationsVrId' object, it is defined so that it
is easily obtainable by a management application and
can be included…
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.4
rcVrrpTmpOperationsState
The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual rout…
Enumeration
Enumerated Values:
1initialize
2backup
3master
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.5
rcVrrpTmpOperationsPriority
This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.6
rcVrrpTmpOperationsAddrCount
The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the rcVrrpTmpAssociatedAddrTable that
correspond to a given IP version/VRID/ifIndex.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.7
rcVrrpTmpOperationsMasterIpAddr
The master router's real IP address. Master router
would set this address to rcVrrpTmpOperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the IP address listed as the source in
VRRP …
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.8
rcVrrpTmpOperationsPrimaryIpAddr
In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
rcVrrpTmpOperationsMasterIpAddr', should the virtu…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.9
rcVrrpTmpOperationsAdvInterval
The time interval between sending advertisement messages.
Only the master router sends VRRP advertisements.
It is configured in seconds, but it is converted into
centiseconds that is used in the VRRP packets.
secondsInteger32r/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.10
rcVrrpTmpOperationsPreemptMode
Controls whether a higher priority virtual router will
preempt a lower priority master.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.11
rcVrrpTmpOperationsAcceptMode
Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is False.
This object is not relevant for rows…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.12
rcVrrpTmpOperationsUpTime
This is the value of the `sysUpTime' object when this
virtual router (i.e., the `rcVrrpTmpOperationsState')
transitioned out of `initialized'.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.13
rcVrrpTmpOperationsStorageType
The storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.14
rcVrrpTmpOperationsRowStatus
The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `rcVrrpTmpOperationsRowStatus' is set to
active(1), no other objects in the conceptual row can
be mod…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.206.1.1.7.1.15

rcVrrpTmpAssociatedIpAddrTable

table
.1.3.6.1.4.1.2272.1.206.1.1.8 · 1 row entry · 4 columns
Open in standard view 
The table of addresses associated with this virtual
router.
rcVrrpTmpAssociatedIpAddrEntry entry .1.3.6.1.4.1.2272.1.206.1.1.8.1
An entry in the table contains an IP address that is
associated with a virtual router. The number of rows
for a given IP version, VrID and ifIndex will equal the
number of IP addresses associated (e.g., backed up) by
t…
Indexes
rcVrrpTmpOperationsIfIndex rcVrrpTmpOperationsInetAddrType rcVrrpTmpOperationsVrId rcVrrpTmpAssociatedIpAddr rcVrrpTmpAssociatedIpAddrPrefixLength
Column Syntax OID
rcVrrpTmpAssociatedIpAddr
The assigned IP addresses that a virtual router is
responsible for backing up.
The size of this object is either 4 or 16 depending on
rcVrrpTmpOperationsInetAddrType.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
 .1.3.6.1.4.1.2272.1.206.1.1.8.1.1
rcVrrpTmpAssociatedIpAddrPrefixLength
The length of the prefix (in bits).
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.2272.1.206.1.1.8.1.2
rcVrrpTmpAssociatedStorageType
The storage type for this conceptual row. Write access
is not required. It is optional to support nonVolatile
StorageType enumeration.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2272.1.206.1.1.8.1.3
rcVrrpTmpAssociatedIpAddrRowStatus
The RowStatus variable, used according to
installation and removal conventions for conceptual
rows. To create a row in this table, a manager sets
this object to either createAndGo(4) or
createAndWait(5). Setting this ob…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.206.1.1.8.1.4

rcVrrpTmpRouterStatisticsTable

table
.1.3.6.1.4.1.2272.1.206.1.2.5 · 1 row entry · 12 columns
Open in standard view 
Table of virtual router statistics.
rcVrrpTmpRouterStatisticsEntry entry .1.3.6.1.4.1.2272.1.206.1.2.5.1
An entry in the table, containing statistics
information about a given virtual router.
Indexes
No indexes recorded
Column Syntax OID
rcVrrpTmpStatisticsMasterTransitions
The total number of times that this virtual router's
state has transitioned to MASTER.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicate…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.1
rcVrrpTmpStatisticsRcvdAdvertisements
The total number of VRRP advertisements received by
this virtual router.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.2
rcVrrpTmpStatisticsAdvIntervalErrors
The total number of VRRP advertisement packets
received for which the advertisement interval is
different than the one configured for the local virtual
router.
Discontinuities in the value of this counter can occur
at r…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.3
rcVrrpTmpStatisticsIpTtlErrors
The total number of VRRP packets received by the
Virtual router with IPv4 TTL (for VRRP over IPv4) or
IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.
Discontinuities in the value of this counter can occur
at re-in…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.4
rcVrrpTmpStatisticsRcvdPriZeroPackets
The total number of VRRP packets received by the
virtual router with a priority of '0'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicat…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.5
rcVrrpTmpStatisticsSentPriZeroPackets
The total number of VRRP packets sent by the virtual
router with a priority of '0'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated b…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.6
rcVrrpTmpStatisticsRcvdInvalidTypePkts
The number of VRRP packets received by the virtual
router with an invalid value in the 'type' field.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other tim…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.7
rcVrrpTmpStatisticsAddressListErrors
The total number of packets received for which the
address list does not match the locally configured list
for the virtual router.
Discontinuities in the value of this counter can occur
at re-initialization of the manag…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.8
rcVrrpTmpStatisticsPacketLengthErrors
The total number of packets received with a packet
length less than the length of the VRRP header.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.9
rcVrrpTmpStatisticsRcvdInvalidAuthentications
The total number of packets received with an unknown
authentication type.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.10
rcVrrpTmpStatisticsDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which any one or more of this entry's counters suffered
a discontinuity.
If no such discontinuities have occurred since the last
re-initialization of the local manag…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.11
rcVrrpTmpStatisticsRefreshRate
The minimum reasonable polling interval for this entry.
This object provides an indication of the minimum
Amount of time required to update the counters in this
entry.
milli-secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.206.1.2.5.1.12

rcVrrpExtOperationsTable

table
.1.3.6.1.4.1.2272.1.206.2.3.11 · 1 row entry · 13 columns
Open in standard view 
Unified Operations table for a VRRP router which consists of
a sequence (i.e., one or more conceptual rows) of
'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items
which describe the operational characteristics of a virtual
router.
This table is an extention of 'rcVrrpTmpOperationsTable'.It
contains the mib objects that are Nortel specific.
rcVrrpExtOperationsEntry entry .1.3.6.1.4.1.2272.1.206.2.3.11.1
An entry in the rcVrrpExtOperationsTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID and ifIndex.
ifIn…
Indexes
No indexes recorded
Column Syntax OID
rcVrrpExtOperationsAction
Used to trigger an action on this vrrp interface.
Enumerationr/w
Enumerated Values:
1none
2preemptHoldDownTimer
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.1
rcVrrpExtOperationsBackUpMaster
Enable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the
time of SMLT.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.2
rcVrrpExtOperationsBackUpMasterState
Indicate whether backup VRRP switch traffic
forwarding is enabled or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.3
rcVrrpExtOperationsCriticalIpAddr
IP address of the interface that will cause a
shutdown event.Only IPv6 address is supported as of now.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.4
rcVrrpExtOperationsCriticalIpAddrEnabled
Indicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (::).
No effect if an user-defined IP address does not exist.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.5
rcVrrpExtOperationsControl
This object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the value to 'disabled', will tranisition the
ro…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.6
rcVrrpExtOperationsHoldDownTimer
Used to configure the amount of time (in seconds)
to wait before preempting the current vrrp master.
secondsInteger32r/w
Constraints:
range: 0-21600
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.7
rcVrrpExtOperationsHoldDownState
Used to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise.
Enumeration
Enumerated Values:
1dormant
2active
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.8
rcVrrpExtOperationsHoldDownTimeRemaining
Used to indicate the amount of time (in seconds) left
before the rcVrrpExtOperationsHoldDownTimer will expire.
secondsInteger32
Constraints:
range: 0-21600
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.9
rcVrrpExtOperationsFasterAdvInterval
This is the faster advertisement interval, in milliseconds,
between sending advertisement messages. When the faster
advertisement interval enable is checked, the faster
advertisement interval is being used instead of…
Integer32r/w
Constraints:
range: 200-1000
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.10
rcVrrpExtOperationsFasterAdvIntervalEnabled
Used to indicate if the Faster Advertisement Interval
should be used.'Disable' means use regular Advertisement
interval.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.11
rcVrrpExtOperationsLinkLocalAddr
The assigned Linklocal addresses to the virtual
router interface. This mib object support only IPv6
address as of now.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.12
rcVrrpExtOperationsGlobalIpAddr
The assigned Global addresses to the virtual router
interface. This mib object support only IPv6 address
as of now.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.206.2.3.11.1.13

rcVspTalkGroupTable

table
.1.3.6.1.4.1.2272.1.208.1.2 · 1 row entry · 11 columns
Open in standard view 
Vsp Talk Group includes IM configuraton and users
rcVspTalkGroupEntry entry .1.3.6.1.4.1.2272.1.208.1.2.1
Entry of the IM group
Indexes
rcVspTalkGroupType
Column Syntax OID
rcVspTalkGroupType
Type of VSP messaging group
Enumeration
Enumerated Values:
2gtalk
3avaya
 .1.3.6.1.4.1.2272.1.208.1.2.1.1
rcVspTalkGroupServerAddress
Messaging server address
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.208.1.2.1.2
rcVspTalkGroupServerPort
The TCP port for Messaging
Integer32r/w
Constraints:
range: 1-49151
 .1.3.6.1.4.1.2272.1.208.1.2.1.3
rcVspTalkGroupServerOldSslTypeEnable
Enable/disable using old style SSL interface
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.208.1.2.1.4
rcVspTalkGroupServerEncryption
Encrytion option.
Enumerationr/w
Enumerated Values:
1asRequested
2required
 .1.3.6.1.4.1.2272.1.208.1.2.1.5
rcVspTalkGroupServerProxy
Messaging server proxy
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.208.1.2.1.6
rcVspTalkGroupClientUsername
Messaging client Username for this device
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.208.1.2.1.7
rcVspTalkGroupClientPassword
Password for rcVspTalkGroupClientUsername which is registered
in the server.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2272.1.208.1.2.1.8
rcVspTalkGroupClientMembers
A list of members of this messaging group. There is
a max of 12 members, with names seperated by comma
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2272.1.208.1.2.1.9
rcVspTalkGroupEnable
Adminstratively Enable/disable this messaging group
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.208.1.2.1.10
rcVspTalkGroupRowStatus
Used to create/delete entries
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.208.1.2.1.11