rcIgmpInterfaceExtnStreamLimitEnable
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.30.1.1.22
Object
column
r/w
EnableValue
Stream Limitation enable/disable.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.30.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIgmpInterfaceExtnEntry
- Table
- rcIgmpInterfaceExtnTable
- Siblings
- 31
Syntax
EnableValue
- Source
- EnableValue
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIgmpInterfaceExtnIfIndex ifindex. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.30.1.1.1 |
| rcIgmpInterfaceExtnFastLeavePortMembers The set of ports that are enabled for fast leave. | column | PortSet | .1.3.6.1.4.1.2272.1.30.1.1.10 |
| rcIgmpInterfaceExtnMrdiscEnable Enable/disable multicast router discovery. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.11 |
| rcIgmpInterfaceExtnDiscoveredRouterPorts list of ports that discovered by
IGMP Multicast router discovery
(MRDISC) protocol. | column | PortSet | .1.3.6.1.4.1.2272.1.30.1.1.12 |
| rcIgmpInterfaceExtnSnoopMRouterPorts The set of ports in this interface that provide
connectivity to an IP Multicast router. | column | PortSet | .1.3.6.1.4.1.2272.1.30.1.1.13 |
| rcIgmpInterfaceExtnSnoopActiveMRouterPorts Active ports. | column | PortSet | .1.3.6.1.4.1.2272.1.30.1.1.14 |
| rcIgmpInterfaceExtnSnoopMRouterExpiration Multicast querier router aging time out. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.30.1.1.15 |
| rcIgmpInterfaceExtnFlushAction IGMP flush action. | column | Enumeration | .1.3.6.1.4.1.2272.1.30.1.1.16 |
| rcIgmpInterfaceExtnRouterAlertEnable Enable Router Alert Check. | column | EnableValue | .1.3.6.1.4.1.2272.1.30.1.1.17 |
| rcIgmpInterfaceExtnSsmEnable enable SSM. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.18 |
| rcIgmpInterfaceExtnSnoopEnable enable snoop. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.2 |
| rcIgmpInterfaceExtnAccntEnable enable/disable accounting. | column | EnableValue | .1.3.6.1.4.1.2272.1.30.1.1.20 |
| rcIgmpInterfaceExtnAuthEnable enable/disable authentication. | column | EnableValue | .1.3.6.1.4.1.2272.1.30.1.1.21 |
| rcIgmpInterfaceExtnMaxStreams Maximum number of stream. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.30.1.1.23 |
| rcIgmpInterfaceExtnNumStreams Current number of streams. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.30.1.1.24 |
| rcIgmpInterfaceExtnNewQuerier The address of the New IGMP Querier on
the IP subnet to which this interface is
attached. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.30.1.1.25 |
| rcIgmpInterfaceExtnSnoopQuerierEnable enable snoop querier. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.26 |
| rcIgmpInterfaceExtnSnoopQuerierAddr The pseudo address of the IGMP Snoop Querier. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.30.1.1.27 |
| rcIgmpInterfaceExtnMvrEnable Enable or disable mcast-vlan-registration on a vlan, it
is used to specified a vlan works as a mcast-vlan,
maximum 16 mcast-vlan is supported. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.28 |
| rcIgmpInterfaceExtnMvrProxyEnable enable or disable mcast-vlan-registration proxy on a vlan,
you must enable mcast-vlan-registration at first. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.29 |
| rcIgmpInterfaceExtnProxySnoopEnable enable proxy snoop. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.3 |
| rcIgmpInterfaceExtnDynamicDowngradeEnable enable dynamic downgrade the IGMP version when older version query message was received. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.30 |
| rcIgmpInterfaceExtnCompatibilityModeEnable enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.31 |
| rcIgmpInterfaceExtnOperVersion The operational version of IGMP which is running on this interface. | column | Enumeration | .1.3.6.1.4.1.2272.1.30.1.1.32 |
| rcIgmpInterfaceExtnExplicitHostTrackingEnable Enable the IGMP protocol running in version 3 to track hosts per channels/groups. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.33 |
| rcIgmpInterfaceExtnMaxAdvertiseInterval | column | Integer32 | .1.3.6.1.4.1.2272.1.30.1.1.4 |
| rcIgmpInterfaceExtnMinAdvertiseInterval | column | Integer32 | .1.3.6.1.4.1.2272.1.30.1.1.5 |
| rcIgmpInterfaceExtnMaxInitialAdvertiseInterval | column | Integer32 | .1.3.6.1.4.1.2272.1.30.1.1.6 |
| rcIgmpInterfaceExtnMaxInitialAdvertments | column | Integer32 | .1.3.6.1.4.1.2272.1.30.1.1.7 |
| rcIgmpInterfaceExtnNeighborDeadInterval | column | Integer32 | .1.3.6.1.4.1.2272.1.30.1.1.8 |
| rcIgmpInterfaceExtnFastLeaveEnable Enable fast leave on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.30.1.1.9 |