rcTengIfInUnknownProtos
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.50.1.3.1.15
Object
column
SNMPv2-SMICounter64
For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces which support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface which does not support protocol multiplexing, this counter will always be 0.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.50.1.3.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcTengIfEntry
- Table
- rcTengIfTable
- Siblings
- 17
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcTengIfIndex A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remai… | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.50.1.3.1.1 |
| rcTengIfInOctets The total number of octets received on the interface,
including framing characters. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.10 |
| rcTengIfInUcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.11 |
| rcTengIfInDiscards The number of inbound packets which were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol. One possibl… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.13 |
| rcTengIfInErrors For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or f… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.14 |
| rcTengIfOutOctets The total number of octets transmitted out of the
interface, including framing characters. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.16 |
| rcTengIfOutUcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.17 |
| rcTengIfOutDiscards The number of outbound packets which were chosen to
be discarded even though no errors had been detected
to prevent their being transmitted. One possible
reason for discarding su… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.19 |
| rcTengIfDescr A textual string containing information about the
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/s… | column | OctetString | .1.3.6.1.4.1.2272.1.50.1.3.1.2 |
| rcTengIfOutErrors For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of o… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.3.1.20 |
| rcTengIfType The type of interface. Additional values for IfType
are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual conventi… | column | Enumeration | .1.3.6.1.4.1.2272.1.50.1.3.1.3 |
| rcTengIfMtu The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.50.1.3.1.4 |
| rcTengIfSpeed An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this obj… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.50.1.3.1.5 |
| rcTengIfPhysAddress The interface's address at its protocol sub-layer.
The interface's media-specific MIB must define the bit
and byte ordering and format of the value contained by
this object. For … | column | RFC1213-MIBPhysAddress | .1.3.6.1.4.1.2272.1.50.1.3.1.6 |
| rcTengIfAdminStatus The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with IfAdmi… | column | Enumeration | .1.3.6.1.4.1.2272.1.50.1.3.1.7 |
| rcTengIfOperStatus The current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If IfAdminStatus is down(2) then
IfOperStatus should be… | column | Enumeration | .1.3.6.1.4.1.2272.1.50.1.3.1.8 |
| rcTengIfLastChange The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network … | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.50.1.3.1.9 |