rc2kCpuSerialPortIfIndex
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.100.3.1.1
Object
column
InterfaceIndex
IfIndex for this port.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.100.3.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rc2kCpuSerialPortEntry
- Table
- rc2kCpuSerialPortTable
- Siblings
- 12
Syntax
InterfaceIndex
- Source
- InterfaceIndex
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rc2kCpuSerialPortSlipMtu Used to configure the MTU for this port.
Used for slip only. | column | Integer32 | .1.3.6.1.4.1.2272.1.100.3.1.10 |
| rc2kCpuSerialPortSlipTxRxCompress Used to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.3.1.11 |
| rc2kCpuSerialPortSlipRxCompress Used to enable/disable compression for receiving
packets on this port. Used for slip only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.3.1.12 |
| rc2kCpuSerialPortPppConfigFile Used to configure the configuration file to use
for PPP. | column | OctetString | .1.3.6.1.4.1.2272.1.100.3.1.13 |
| rc2kCpuSerialPortDescr Port description. | column | OctetString | .1.3.6.1.4.1.2272.1.100.3.1.2 |
| rc2kCpuSerialPortMode Used to configure the mode this port should
operate in. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.3 |
| rc2kCpuSerialPortAdminStatus Used to configure the administrative status
setting for this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.4 |
| rc2kCpuSerialPortOperStatus Used to indicate the operational status
setting for this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.5 |
| rc2kCpuSerialPortBaudRate Used to configure the baud rate of this port. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.6 |
| rc2kCpuSerialPortDataBits Used to configure the number of data bits, per
byte of data, this port should send/receive. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.3.1.7 |
| rc2kCpuSerialPortMyAddr Used to configure this port's IP address.
Used for both 'slip' and 'ppp' modes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.100.3.1.8 |
| rc2kCpuSerialPortPeerAddr Used to configure the peer's IP address.
Used for both 'slip' and 'ppp' modes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.100.3.1.9 |