rcPlugOptModDdmStatusMask
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.71.1.1.2
Object
column
Bits
Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.71.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcPlugOptModEntry
- Table
- rcPlugOptModTable
- Siblings
- 57
Syntax
Bits
Values & Constraints
Enumerated Values
0 | ddm-ok |
1 | ddm-checksum-error |
2 | ddm-i2c-read-error |
3 | ddm-threshold-error |
4 | ddm-calibration-error |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPlugOptModPortIndex An index value that uniquely identifies a port on a
blade or line-card. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.71.1.1.1 |
| rcPlugOptModVendorDateCode The date code is an 8-byte field that contains the
vendor's date code in ASCII. This field is
mandatory and takes the form: YYMMDDLC where
YY is the 2 low order digits of the year… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.10 |
| rcPlugOptModPEC This is a 16 byte left-justified ASCII field that
records the Nortel Product Equipment Code order
number for the module. Nortel part numbers are 9
bytes long, so the 10th through … | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.11 |
| rcPlugOptModCLEI This is a 10 byte left-justified ASCII field that
records the Nortel supplied Common Language
Equipment Identifier code for the device. The CLEI
code is a Telcordia human-readable… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.12 |
| rcPlugOptModSupportsDDM This boolean indicates whether or not the device
supports the DDM capability. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.71.1.1.13 |
| rcPlugOptModAux1Monitoring This value tells what Aux1 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3 TE… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.14 |
| rcPlugOptModAux2Monitoring This value tells you what AUX2 is measuring.The values are
as follows:
0 Auxiliary monitoring not implemented
1 APD Bias Voltage mV (units of 10 mV)
2 Reserved
3… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.15 |
| rcPlugOptModWaveLength Nominal transmitter output wavelength at room
temperature. It is expressed in nano-meters. | column | Integer32 | .1.3.6.1.4.1.2272.1.71.1.1.16 |
| rcPlugOptModTemperature This value represents the internally measured
module temperature. It is expressed in units of
1/256 of a degree Celsius and can range from -40C
to +125C with 0.0001 accuracy.The … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.17 |
| rcPlugOptModTemperatureHighAlarmThreshold This value represents the vendor specified high
temperature threshold. If the device
temperature exceeds this value, a temperature high
is asserted. It is expressed in the same
un… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.18 |
| rcPlugOptModTemperatureLowAlarmThreshold This value represents the vendor specified low
temperature threshold. If the device
temperature falls below this value, a temperature
low is asserted. It is expressed in the same
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.19 |
| rcPlugOptModTemperatureHighWarningThreshold This value represents the vendor specified high
temperature warning threshold. If the device
temperature exceeds this value, a temperature high
warning is asserted. It is expresse… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.20 |
| rcPlugOptModTemperatureLowWarningThreshold This value represents the vendor specified low
temperature warning threshold. If the device
temperature falls below this value, a temperature
low warning is asserted. It is expres… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.21 |
| rcPlugOptModVoltage This value represents the internally measured
supply voltage. It is a positive number expressed
in microvolts and can range from 0 to 65535 mV. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.22 |
| rcPlugOptModVoltageHighAlarmThreshold This value represents the vendor specified high
voltage threshold. If the measured voltage exceeds
this value, a high voltage is asserted. It
is a positive number expressed in mic… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.23 |
| rcPlugOptModVoltageLowAlarmThreshold This value represents the vendor specified low
voltage threshold. If the measured voltage falls
below this value, a low voltage is asserted.
It is a positive number expressed in m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.24 |
| rcPlugOptModVoltageHighWarningThreshold This value represents the vendor specified high
voltage warning threshold. If the measured voltage
exceeds this value, a high voltage warning is
asserted. It is a positive number … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.25 |
| rcPlugOptModVoltageLowWarningThreshold This value represents the vendor specified low
voltage warning threshold. If the measured voltage
falls below this value, a low voltage warning is
asserted. It is a positive numbe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.26 |
| rcPlugOptModBias This value represents the internally measured
transmitter laser bias current. It is a positive
number expressed in units of 2 microamps and can
range from 0 to 131 mA with 0.0001 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.27 |
| rcPlugOptModBiasHighAlarmThreshold This value represents the vendor specified high
current threshold. If the measured bias
current exceeds this value, a high current alarm
is asserted. It is a positive number expre… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.28 |
| rcPlugOptModBiasLowAlarmThreshold This value represents the vendor specified low
current threshold. If the measured bias
current falls below this value, a low current
is asserted. It is a positive number
expressed… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.29 |
| rcPlugOptModCalibration The identifier value indicates type of calibration. | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.3 |
| rcPlugOptModBiasHighWarningThreshold This value represents the vendor specified high
current warning threshold. If the measured bias
current exceeds this value, a high current warning
is asserted. It is a positive nu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.30 |
| rcPlugOptModBiasLowWarningThreshold This value represents the vendor specified low
current warning threshold. If the measured bias
current falls below this value, a low current
warning is asserted. It is a positive … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.31 |
| rcPlugOptModTxPower This value represents the internally measured
coupled TX output power. It is a positive number
expressed in units of micro watts and can range
from 0 to 65.535 mW (-40 to 18.16 dB… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.32 |
| rcPlugOptModTxPowerHighAlarmThreshold This value represents the vendor specified high
transmit power threshold. If the measured
transmitter power exceeds this value, a
transmitter power high is asserted. It is
a posit… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.33 |
| rcPlugOptModTxPowerLowAlarmThreshold This value represents the vendor specified low
transmit power threshold. If the measured
transmitter power falls below this value, a
transmitter power low is asserted. It is a
pos… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.34 |
| rcPlugOptModTxPowerHighWarningThreshold This value represents the vendor specified high
transmit power warning threshold. If the measured
transmitter power exceeds this value, a
transmitter power high warning is asserte… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.35 |
| rcPlugOptModTxPowerLowWarningThreshold This value represents the vendor specified low
transmit power warning threshold. If the measured
transmitter power falls below this value, a
transmitter power low warning is asser… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.36 |
| rcPlugOptModRxPower This value represents the internally measured
received power. It is a positive number expressed
in units of micro watts and can range from 0 to
65.535 mW (-40 to 18.16 dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.37 |
| rcPlugOptModRxPowerHighAlarmThreshold This value represents the vendor specified high
receiver power threshold. If the measured
received power exceeds this value, a receiver
power high is asserted. It is a positive
nu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.38 |
| rcPlugOptModRxPowerLowAlarmThreshold This value represents the vendor specified low
receiver power threshold. If the measured
received power falls below this value, a receiver
power low is asserted. It is a positive
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.39 |
| rcPlugOptModPowerMeasure The identifier value indicates type of external power. | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.4 |
| rcPlugOptModRxPowerHighWarningThreshold This value represents the vendor specified high
receiver power warning threshold. If the measured
received power exceeds this value, a receiver
power high warning is asserted. It … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.40 |
| rcPlugOptModRxPowerLowWarningThreshold This value represents the vendor specified low
receiver power warning threshold. If the measured
received power falls below this value, a receiver
power low warning is asserted. I… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.41 |
| rcPlugOptModAux1 This represents the internally measured A/D
value specified. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.42 |
| rcPlugOptModAux1HighAlarmThreshold This value represents the vendor specified high
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.43 |
| rcPlugOptModAux1LowAlarmThreshold This value represents the vendor specified low
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.44 |
| rcPlugOptModAux1HighWarningThreshold This value represents the vendor specified high
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.45 |
| rcPlugOptModAux1LowWarningThreshold This value represents the vendor specified low
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.46 |
| rcPlugOptModAux2 This represents the internally measured A/D
value specified. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.47 |
| rcPlugOptModAux2HighAlarmThreshold This value represents the vendor specified high
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.48 |
| rcPlugOptModAux2LowAlarmThreshold This value represents the vendor specified low
Aux1 threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.49 |
| rcPlugOptModConnectorType The connector type is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. This is an assigned
name that indicates some cha… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.5 |
| rcPlugOptModAux2HighWarningThreshold This value represents the vendor specified high
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.50 |
| rcPlugOptModAux2LowWarningThreshold This value represents the vendor specified low
Aux1 warning threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.71.1.1.51 |
| rcPlugOptModTemperatureStatus Used to indicate the current temperature status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.52 |
| rcPlugOptModVoltageStatus Used to indicate the current voltage status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.53 |
| rcPlugOptModBiasStatus Used to indicate the current laser bias status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.54 |
| rcPlugOptModTxPowerStatus Used to indicate the current transmitter power
status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.55 |
| rcPlugOptModRxPowerStatus Used to indicate the current receiver power status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.56 |
| rcPlugOptModAux1Status Used to indicate the current Aux1 status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.57 |
| rcPlugOptModAux2Status Used to indicate the current Aux2 status | column | Enumeration | .1.3.6.1.4.1.2272.1.71.1.1.58 |
| rcPlugOptModVendorName The vendor name is a 16 character field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces. The vendor name
shall be the full name of the corpo… | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.6 |
| rcPlugOptModVendorPartNumber The vendor part number is a 16 byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the vendor
part number or product name. | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.7 |
| rcPlugOptModVendorRevNumber The vendor revision number is a 4-byte field that
contains ASCII characters, left-aligned and padded
on the right with ASCII spaces, defining the
vendor product revision number. | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.8 |
| rcPlugOptModVendorSN The vendor serial number is a 16 character field
that contains ASCII characters, left-aligned and
padded on the right with ASCII spaces, defining
the vendor serial number for the … | column | OctetString | .1.3.6.1.4.1.2272.1.71.1.1.9 |