rcVrrpOperVirtualMacAddr
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.73.1.1.2.1.4
Object
column
SNMPv2-TCMacAddress
The virtual MAC address of the virtual router. This is derived
as follows: 00-00-5E-00-01-<VRID>.
Where the first three octets consist of the IANA's OUI; The
next two octets indicate the address block of the VRRP protocol;
and the remaining octets consist of the VRID.
Although this object can be derived from the 'rcVrrpOperVrId'
object, it is included here, for completeness, so that it
is easily obtainable by a management application and can be
included in VRRP-related SNMP traps.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.73.1.1.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcVrrpOperEntry
- Table
- rcVrrpOperTable
- Siblings
- 25
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcVrrpOperIfIndex port interface index. | column | InterfaceIndexOrZero | .1.3.6.1.4.1.2272.1.73.1.1.2.1.1 |
| rcVrrpOperAuthType Authentication type used for VRRP protocol exchanges between
virtual routers. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.10 |
| rcVrrpOperAuthKey The Authentication Key. If the virtual router's Authorization
Type is 'simpleTextPassword', and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
… | column | OctetString | .1.3.6.1.4.1.2272.1.73.1.1.2.1.11 |
| rcVrrpOperHMACMD5Key The Authentication Key. If the virtual router's 'Authorization
Type' is 'ipAuthenticationHeader', and the key length is shorter
than 16 octets, the agent will left adjust and zer… | column | OctetString | .1.3.6.1.4.1.2272.1.73.1.1.2.1.12 |
| rcVrrpOperAdvertisementInterval This is the time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.13 |
| rcVrrpOperPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.14 |
| rcVrrpOperVirtualRouterUpTime This is the time interval (in hundredths of a second)
since this virtual router was initialized. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.73.1.1.2.1.15 |
| rcVrrpOperRowStatus The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to 'createAndGo' results in enabling the VRRP
protocol for… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.73.1.1.2.1.16 |
| rcVrrpOperCriticalIpAddr IP address of the interface that will cause a
shutdown event. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.17 |
| rcVrrpOperHoldDownTimer Used to configure the amount of time (in seconds)
to wait before preempting the current vrrp master. | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.18 |
| rcVrrpOperHoldDownState Used to indicate the hold-down state of this vrrp
interface. If the hold-down timer is operational
this variable will be set to 'active'. 'dormant'
otherwise. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.19 |
| rcVrrpOperVrId This object contains the Virtual Router Identifier (VRID). | column | VRRP-MIBVrId | .1.3.6.1.4.1.2272.1.73.1.1.2.1.2 |
| rcVrrpOperHoldDownTimeRemaining Used to indicate the amount of time (in seconds)
left before the rcVrrpOperHoldDownTimer will expire. | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.20 |
| rcVrrpOperAction Used to trigger an action on this vrrp interface. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.21 |
| rcVrrpOperCriticalIpAddrEnable Indicate if an user-defined critical IP address should be
enabled. 'NO' = use the default IP address (0.0.0.0).
No effect if an user-defined IP address does not exist. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.73.1.1.2.1.22 |
| rcVrrpOperBackUpMaster Enable the backup VRRP switch traffic forwarding.
This will reduce the traffic in IST link in the time of SMLT. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.23 |
| rcVrrpOperBackUpMasterState Indicate whether backup VRRP switch traffic forwarding is enabled or not. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.24 |
| rcVrrpOperFasterAdvInterval This is the faster advertisement interval, in
milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisem… | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.25 |
| rcVrrpOperFasterAdvIntervalEnable Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.26 |
| rcVrrpOperIpAddr The assigned IP addresses that a virtual router is responsible
for backing up. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.3 |
| rcVrrpOperState The current state of the virtual router. | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.5 |
| rcVrrpOperControl This object will enable/disable the virtual router
function. Setting the value to 'enabled', will transition
the state of the router from 'initialize to 'backup';
Setting the valu… | column | Enumeration | .1.3.6.1.4.1.2272.1.73.1.1.2.1.6 |
| rcVrrpOperPriority This object specifies the priority for the virtual
router (e.g., master election) with respect to other
virtual routers that are backing up a one or more
associated IP addresses. … | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.7 |
| rcVrrpOperIpAddrCount The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/… | column | Integer32 | .1.3.6.1.4.1.2272.1.73.1.1.2.1.8 |
| rcVrrpOperMasterIpAddr The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.73.1.1.2.1.9 |