rcIpRoutePolicySetCommunityNumber
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.8.100.13.1.21
Object
this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.8.100.13.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpRoutePolicyEntry
- Table
- rcIpRoutePolicyTable
- Siblings
- 42
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpRoutePolicyId Index used to identify a group of policies in
the route policy tableRoute map id | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.1 |
| rcIpRoutePolicyMatchNetwork can specify one or more prefix list name or id(s) | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.10 |
| rcIpRoutePolicyMatchIpRouteSource In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperat… | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.11 |
| rcIpRoutePolicyMatchNextHop In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperat… | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.12 |
| rcIpRoutePolicyMatchInterface Match received interface. Only for rip routes.
Ignored in all other cases. | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.13 |
| rcIpRoutePolicyMatchRouteType For BGP this choice refers to locally generated
routes external routes learned via ebgp nbr. For
OSPF internal refers to intra and inter area
routes (belongs to local autonomous s… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.14 |
| rcIpRoutePolicyMatchMetric Match mec field in the incoming advertisement. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.15 |
| rcIpRoutePolicyMatchTag specifies a list of tag(s), that will be used
during the match criteria process.contains one
or more tag values.. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.16 |
| rcIpRoutePolicySetRoutePreference if non-zero specifies the route preference
value to be assigned to the routes that applies
this policy.contains one or more tag values.. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.17 |
| rcIpRoutePolicySetAsPath The AS path vaule to be used whether the
SetAsPathMode is Tag or Prepend.as-path string.. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.18 |
| rcIpRoutePolicySetAsPathMode It can be either tag or prepend tag.
applicable only while redistributing routes to
BGP.Converts the tag of a route into AS path. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.19 |
| rcIpRoutePolicySequenceNumber second index used to identify a specific policy
with in the route policy group (grouped by Id).
This field allows users to specify different
MATCH, SET parameters and an action. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.2 |
| rcIpRoutePolicySetAutomaticTag | column | EnableValue | .1.3.6.1.4.1.2272.1.8.100.13.1.20 |
| rcIpRoutePolicySetCommunityMode this value can be either append or none
unchanged - keep the community attribute in the
route path as it is.
none - remove the community in the route path
additive - a… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.22 |
| rcIpRoutePolicySetMetricTypeInternal Indicates to set the MED value for routes
advertised to ebgp nbrs to the IGP metric value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.23 |
| rcIpRoutePolicySetMetric Value of the metric to be used while sending an
update for the routes that match the matching
criteria in this route policy.
Default - 0 indicates the internal value defined
for p… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.24 |
| rcIpRoutePolicySetMetricType Metric type for the routes to be imported into
OSPF routing protocol, which passed the matching
criteria configured in this route policy. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.25 |
| rcIpRoutePolicySetNextHop IpAddress of the next hop router. Ignored for
DVMRP routes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.100.13.1.26 |
| rcIpRoutePolicySetOrigin igp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol). | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.27 |
| rcIpRoutePolicySetLocalPref this value will be used during route decision
process in the BGP protocol. Applicable to BGP
only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.28 |
| rcIpRoutePolicySetOriginEgpAs indicates the Remote autonomous sys number.
Applicable to BGP only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.29 |
| rcIpRoutePolicyName Is used to group a set of policies with different
sequence number. Id & Name have one-on-one
relationship. Different policy groups can
contain same sequence … | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.3 |
| rcIpRoutePolicySetTag Value to be used for setting tag of the
destination routing protocol. If not specified
forward the tag value in the source routing
protocol. Value 0 indicates not set | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.30 |
| rcIpRoutePolicySetWeight Should be using with match as-path condition.
Weight value for the routing table. For BGP
this value will override the weight configured
through NetworkTableEntry or FilterListWei… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.31 |
| rcIpRoutePolicySetInjectNetList specifies the prefix list to be used either
for injecting the routes into the routing
table or to include the networks in the
advertisement. Ignored for DVMRP. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.32 |
| rcIpRoutePolicyRowStatus row status | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.100.13.1.33 |
| rcIpRoutePolicySetMask Set Mask Ip Address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.100.13.1.34 |
| rcIpRoutePolicyNssaPbit Set/Reset P bit in specified type 7 LSA.
By default P bit is always set in case user
set it to disable state for particular route
policy than all type 7 LSAs associated with
that … | column | EnableValue | .1.3.6.1.4.1.2272.1.8.100.13.1.35 |
| rcIpRoutePolicyMatchVrf An array used to identify which source VRFs have leaked
routes to the local VRF | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.36 |
| rcIpRoutePolicyMatchExtCommunity Filter incoming/outgoing updates based on communities | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.37 |
| rcIpRoutePolicySetExtCommunity Set Extended-community string. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.38 |
| rcIpRoutePolicySetExtCommunityMode This value can be either additive, unchanged or overwrite. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.39 |
| rcIpRoutePolicyEnable Value specified here indicate whether
this policy is enabled or not. If
disabled policy sould not be used. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.100.13.1.4 |
| rcIpRoutePolicyMatchLocalPref Match Local Prefix value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.8.100.13.1.40 |
| rcIpRoutePolicyMatchIpRouteDest to match route destination, one can specify one
or more prefix list name(s) or id(s) separated by comma. | column | OctetString | .1.3.6.1.4.1.2272.1.8.100.13.1.41 |
| rcIpRoutePolicySetLevel Level of the Ip routing policy | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.42 |
| rcIpRoutePolicyIpv6SetNextHop Address of the ipv6 next hop router. Ignored for
DVMRP routes. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.8.100.13.1.43 |
| rcIpRoutePolicyMode specifies the action to be taken when this
policy is selected for a specific route.
This can be permit or deny or continue.
Permit indicates allow the route, deny indicates
ignore… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.100.13.1.5 |
| rcIpRoutePolicyMatchProtocol Match protocol. Used for RIP and DVMRP announce
policy only.
Value is one of multiple (logical 'OR)
of the following values:
direct(1),
static(2),
rip(4),
ospf(8),
… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.100.13.1.6 |
| rcIpRoutePolicyMatchAsPath Applicable to BGP protocol only. Match the BGP
autonomous system path. This will override the
BGP neighbor filter list info. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.7 |
| rcIpRoutePolicyMatchCommunity Applicable to BGP protocol only. Filter
incoming/outgoing updates based on communities. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2272.1.8.100.13.1.8 |
| rcIpRoutePolicyMatchCommunityExact If enabled indicates the match has be an exact
(i.e., all of the communities specified in the
path has to be matched). | column | EnableValue | .1.3.6.1.4.1.2272.1.8.100.13.1.9 |