rc2kCpuSerialPortBaudRate

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.100.3.1.6

MIB view Table view

Object

column r/w Enumeration

Used to configure the baud rate of this port.

Context

MIB: RAPID-CITY-VSP
OID: .1.3.6.1.4.1.2272.1.100.3.1.6
Type: column
Access: readwrite
Status: current
Parent: rc2kCpuSerialPortEntry
Table: rc2kCpuSerialPortTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`2400`	baud2400
`4800`	baud4800
`9600`	baud9600
`19200`	baud19200
`38400`	baud38400
`57600`	baud57600
`115200`	baud115200

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rc2kCpuSerialPortIfIndex IfIndex for this port.	column	InterfaceIndex	`.1.3.6.1.4.1.2272.1.100.3.1.1`
rc2kCpuSerialPortSlipMtu Used to configure the MTU for this port. Used for slip only.	column	Integer32	`.1.3.6.1.4.1.2272.1.100.3.1.10`
rc2kCpuSerialPortSlipTxRxCompress Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.100.3.1.11`
rc2kCpuSerialPortSlipRxCompress Used to enable/disable compression for receiving packets on this port. Used for slip only.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.100.3.1.12`
rc2kCpuSerialPortPppConfigFile Used to configure the configuration file to use for PPP.	column	OctetString	`.1.3.6.1.4.1.2272.1.100.3.1.13`
rc2kCpuSerialPortDescr Port description.	column	OctetString	`.1.3.6.1.4.1.2272.1.100.3.1.2`
rc2kCpuSerialPortMode Used to configure the mode this port should operate in.	column	Enumeration	`.1.3.6.1.4.1.2272.1.100.3.1.3`
rc2kCpuSerialPortAdminStatus Used to configure the administrative status setting for this port.	column	Enumeration	`.1.3.6.1.4.1.2272.1.100.3.1.4`
rc2kCpuSerialPortOperStatus Used to indicate the operational status setting for this port.	column	Enumeration	`.1.3.6.1.4.1.2272.1.100.3.1.5`
rc2kCpuSerialPortDataBits Used to configure the number of data bits, per byte of data, this port should send/receive.	column	Enumeration	`.1.3.6.1.4.1.2272.1.100.3.1.7`
rc2kCpuSerialPortMyAddr Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2272.1.100.3.1.8`
rc2kCpuSerialPortPeerAddr Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2272.1.100.3.1.9`