rcSyslogHostModuleId

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.22.2.1.5

Object

column r/w Enumeration

Specifies for which modules/tasks syslog messages
should be sent.  Default is all modules/tasks.

Context

MIB: RAPID-CITY-VSP
OID: .1.3.6.1.4.1.2272.1.22.2.1.5
Type: column
Access: readwrite
Status: current
Parent: rcSyslogHostEntry
Table: rcSyslogHostTbl
Siblings: 19

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	common
`2`	snmp
`4`	rmon
`8`	portmgr
`16`	chasmgr
`32`	bridge
`64`	ospf
`128`	hwif
`256`	sim
`512`	cpp
`1024`	netdrv
`2048`	vlanmgr
`4096`	cli
`8192`	main
`16384`	p2ip
`32768`	rcip
`65536`	rompager
`131072`	acif
`262144`	gbip
`524288`	wdt
`1048576`	tdp
`2097152`	mandiag
`4194304`	mantest
`8388608`	igmp
`16777216`	ipfil
`33554432`	mlt
`67108864`	ippolicy
`134217728`	ipmc
`268435456`	syslog

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rcSyslogHostId Host Id.	column	Integer32	`.1.3.6.1.4.1.2272.1.22.2.1.1`
rcSyslogHostMapErrorSeverity Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.10`
rcSyslogHostMapMfgSeverity Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.11`
rcSyslogHostMapFatalSeverity Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.12`
rcSyslogHostMapTraceMsg Specifies the syslog severity to use for syslog trace messages. Default is DEBUG.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.13`
rcSyslogHostMapTrapMsg Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.14`
rcSyslogHostLogTraceMsgs Indicate whether to activate the host to log the syslog trace messages.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.22.2.1.15`
rcSyslogHostLogTrapMsgs Indicate whether to activate the host to log the syslog messages for SNMP traps.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.22.2.1.16`
rcSyslogHostEnable Enable/Disable messages to be sent to syslog host.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.22.2.1.17`
rcSyslogHostRowStatus Used to create/delete entries in the rcSyslogTable.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2272.1.22.2.1.18`
rcSyslogHostAddressType Address Type of the Host.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.2272.1.22.2.1.19`
rcSyslogHostIpAddr deprecated Host Ip Address	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2272.1.22.2.1.2`
rcSyslogHostAddress Address of the Host.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.2272.1.22.2.1.20`
rcSyslogHostUdpPort Specifies the UDP port to use to send syslog messages to the host.	column	Integer32	`.1.3.6.1.4.1.2272.1.22.2.1.3`
rcSyslogHostFacility Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.4`
rcSyslogHostModuleId2 Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2272.1.22.2.1.6`
rcSyslogHostSeverity Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'. Value is one of multiple (logical 'OR') of the following: …	column	Integer32	`.1.3.6.1.4.1.2272.1.22.2.1.7`
rcSyslogHostMapInfoSeverity Specifies the syslog severity to use for Accelar INFO messages. Default is INFO.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.8`
rcSyslogHostMapWarningSeverity Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO.	column	Enumeration	`.1.3.6.1.4.1.2272.1.22.2.1.9`