rcTengIfName
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.50.1.4.1.2
Object
column
RFC1213-MIBDisplayString
The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the rcTengIfTable together represent a single interface as named by the device, then each will have the same value of rcTengIfName. If there is no local name, or this object is otherwise not applicable, then this object contains a 0-length string.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.50.1.4.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcTengIfXEntry
- Table
- rcTengIfXTable
- Siblings
- 17
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcTengIfXIndex A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remai… | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.50.1.4.1.1 |
| rcTengIfHCInBroadcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer. This object is a
64-bit version of IfIn… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.10 |
| rcTengIfHCOutOctets The total number of octets transmitted out of the
interface, including framing characters. This object
is a 64-bit version of rcTengIfOutOctets. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.11 |
| rcTengIfHCOutUcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were not
addressed to a multicast or broadcast address at this
sub-layer, including tho… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.12 |
| rcTengIfHCOutMulticastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were disc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.13 |
| rcTengIfHCOutBroadcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were disc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.14 |
| rcTengIfLinkUpDownTrapEnable Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'to… | column | Enumeration | .1.3.6.1.4.1.2272.1.50.1.4.1.15 |
| rcTengIfHighSpeed An estimate of the interface's current bandwidth in
units of 1,000,000 bits per second. If this object
reports a value of `n' then the speed of the interface
is somewhere in the … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.50.1.4.1.16 |
| rcTengIfPromiscuousMode This object has a value of false(2) If this interface
only accepts packets/frames that are addressed to this
station. This object has a value of true(1) when the
station accepts … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.50.1.4.1.17 |
| rcTengIfConnectorPresent This object has the value 'true(1)' if the interface
sublayer has a physical connector and the value
'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.50.1.4.1.18 |
| rcTengIfInMulticastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.3 |
| rcTengIfInBroadcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.4 |
| rcTengIfOutMulticastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were disc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.5 |
| rcTengIfOutBroadcastPkts The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were disc… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.6 |
| rcTengIfHCInOctets The total number of octets received on the interface,
including framing characters. This object is a 64-bit
version of rcTengIfInOctets. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.7 |
| rcTengIfHCInUcastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
This object is a 64-bit… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.8 |
| rcTengIfHCInMulticastPkts The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer. For a MAC layer
protocol, this includes… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2272.1.50.1.4.1.9 |