rcIpBgpPeerState
RAPID-CITY-VSP ·
.1.3.6.1.4.1.2272.1.8.101.9.1.25
Object
column
Enumeration
The BGP peer connection state.
Context
- MIB
- RAPID-CITY-VSP
- OID
.1.3.6.1.4.1.2272.1.8.101.9.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcIpBgpPeerEntry
- Table
- rcIpBgpPeerTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | idle |
2 | connect |
3 | active |
4 | opensent |
5 | openconfirm |
6 | established |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpBgpPeerEnable Enable/Disable: controls whether the peer connection is enabled
or disabled | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.9.1.1 |
| rcIpBgpPeerMaxPrefix Sets a limit on the number of routes that will be
accepted from a neighbor. A value of zero indicates no
limit | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.10 |
| rcIpBgpPeerNextHopSelf Set NextHop Attribute to local router address before
sending updates to remote peer | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.9.1.11 |
| rcIpBgpPeerRoutePolicyIn Route Policy Name that will be applied to all networks
learned from this peer | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.9.1.12 |
| rcIpBgpPeerRoutePolicyOut Route policy name that will be applied to all outgoing
updates | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.9.1.13 |
| rcIpBgpPeerRouteReflectorClient Indicates whether this peer is a route reflector client. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.8.101.9.1.14 |
| rcIpBgpPeerSoftReconfigurationIn If Peer soft reconfiguration is enabled in the in-bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconf… | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.15 |
| rcIpBgpPeerSoftReconfiguration If rcIpBgpPeerSoftReconfigurationIn is enabled in the
in-bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcI… | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.9.1.16 |
| rcIpBgpPeerRemovePrivateAs Enable and disable private AS number from being
stripped when sending an update | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.17 |
| rcIpBgpPeerRowStatus Used to create/delete entries in the Table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.8.101.9.1.18 |
| rcIpBgpPeerMD5Authentication Enable and Disable MD5 authentication | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.19 |
| rcIpBgpPeerIpAddress The Ip address of this peer | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.101.9.1.2 |
| rcIpBgpPeerDebugMask value is one of multiple (logically by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
… | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.20 |
| rcIpBgpPeerSendCommunity | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.21 |
| rcIpBgpPeerUpdateSourceInterface The IP address to be used for Circuitless IP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.101.9.1.22 |
| rcIpBgpPeerLastError The last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
conta… | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.9.1.26 |
| rcIpBgpPeerVpnv4Address The vpnv4 routes specified. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.27 |
| rcIpBgpPeerIpvpnLiteCap The IPVPN-lite capability can be enabled or disabled on
the bgp neighbor peer. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.28 |
| rcIpBgpPeerSooAddress The site-of-origin ip address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.8.101.9.1.29 |
| rcIpBgpPeerRemoteAs Remote Autonomous system number of this peer | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.3 |
| rcIpBgpPeerSooAsNumber The asnum for the site-of-origin for bgp peer. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.30 |
| rcIpBgpPeerSooAssignedNum The Assigned number required along with asnum or
address to configure the site-of-origin for bgp peer. | column | Unsigned32 | .1.3.6.1.4.1.2272.1.8.101.9.1.31 |
| rcIpBgpPeerSooType The soo type can be asnum or ipaddress. | column | Enumeration | .1.3.6.1.4.1.2272.1.8.101.9.1.32 |
| rcIpBgpPeerRouteRefresh Route refresh for bgp peer. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.33 |
| rcIpBgpPeerAsOverride The AS Override value can be enabled or disabled for bgp peer. | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.34 |
| rcIpBgpPeerAllowAsIn The number of as-in allowed for bgp peer | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.35 |
| rcIpBgpPeerGroupName Peer group name to which this peer belongs (optional) | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.9.1.4 |
| rcIpBgpPeerDefaultOriginate To allow a BGP speaker (the local router) to send
the default route 0.0.0.0 to a neighbor for use as
a default route | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.5 |
| rcIpBgpPeerEbgpMultiHop To accept and attempt BGP connections to external
peers residing on networks that are not directly
connected | column | EnableValue | .1.3.6.1.4.1.2272.1.8.101.9.1.6 |
| rcIpBgpPeerAdvertisementInterval To set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 5
to 120. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.7 |
| rcIpBgpPeerPassword To enable MD5 authentication on a TCP connection
between two BGP peers Case-sensitive password of
up to 80 character | column | OctetString | .1.3.6.1.4.1.2272.1.8.101.9.1.8 |
| rcIpBgpPeerWeight To assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535. | column | Integer32 | .1.3.6.1.4.1.2272.1.8.101.9.1.9 |