rcPortType

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.4.10.1.1.2
MIB view Table view

Object

column Enumeration 
Port type

Context

MIB
RAPID-CITY-VSP
OID
.1.3.6.1.4.1.2272.1.4.10.1.1.2
Type
column
Access
readonly
Status
current
Parent
rcPortEntry
Table
rcPortTable
Siblings
40

Syntax

Enumeration

Values & Constraints

Enumerated Values
0other
1rc100BaseTX
2rc100BaseT2
3rc100BaseF
4rc1000BaseF
5rc1000BaseDualF
6rc10BaseF
7rcPosMMF
8rcPosSMF
9rcAtm
10rcGbicLx
11rcGbicSx
12rcGbicXd
13rcGbicCu
14rcGbicOther
15rcOc3cSM
16rcOc3cMM
17rcOc3cCOPPER
18rcOc12cSM
19rcOc12cMM
20rcDs3
21rcE3
22rcGbicNone
23rc1000BaseT
24rcGbicZx
25rcOc3cAtmSM
26rcOc3cAtmMM
27rcOc12cAtmSM
28rcOc12cAtmMM
29rcOc3cPosSM
30rcOc3cPosMM
31rcOc12cPosSM
32rcOc12cPosMM
33rcGbic1470
34rcGbic1490
35rcGbic1510
36rcGbic1530
37rcGbic1550
38rcGbic1570
39rcGbic1590
40rcGbic1610
41rcRmon
42rcGbic1470APD
43rcGbic1490APD
44rcGbic1510APD
45rcGbic1530APD
46rcGbic1550APD
47rcGbic1570APD
48rcGbic1590APD
49rcGbic1610APD
50rc10GbLW
51rc10GbLR
53rc1000BaseTX
55rcGbicBx
56rc10GbNone
58rc10GbSR
59rc10GbSW
60rc10GbER
61rc10GbEW
62rc10GbOther
63rc1000BaseTXPOE
64rc10GbZR
65rc10GbZW
66rcGbic1310Xd
67rcGbic1470Xd
68rcGbic1490Xd
69rcGbic1510Xd
70rcGbic1530Xd
71rcGbic1550Xd
72rcGbic1570Xd
73rcGbic1590Xd
74rcGbic1610Xd
75rcGbic1470Zx
76rcGbic1490Zx
77rcGbic1510Zx
78rcGbic1530Zx
79rcGbic1550Zx
80rcGbic1570Zx
81rcGbic1590Zx
82rcGbic1610Zx
83rcGbic1690Zx
84rcGbic1310Bx
85rcGbic1490Bx
86rcGbicEx
87rcGbic850Sx
88rcGbic1200Lx
89rcGbic1300Lx
90rcGbic1310Lx
91rcGbic1490Lx
92rcGbic1550Lx
93rcGbic1550Ex
94rc1GbFD
95rc10GbLRM
96rc10GbDWDMR
97rc10GbDWDMW
98rc100BaseSX
99rc100BaseLX
100rc100BaseFX
101rc100BaseBX
102rc100BaseZX
103rcGbicMTRJ
104rcGbic1300SeFx
105rcGbicCx
106rc10GbCX

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcPortIndex
An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.
columnInterfaceIndex.1.3.6.1.4.1.2272.1.4.10.1.1.1
rcPortIngressRatePeak
Peak rate limit for this port. 0 means disable
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.108
rcPortIngressRateSvc
Service rate limit for this port. 0 mean deisable
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.109
rcPortAutoNegotiate
Indicate whether this port enabled for auto negotiations or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.11
rcPortCpLimitPktRate
Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.110
rcPortCpLimitShutDownEnable
Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.111
rcPortAdminDuplex
Indicates the port duplex type
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.12
rcPortOperDuplex
Indicate this port's current duplex value.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.13
rcPortAdminSpeed
Indicate this port's speed.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.14
rcPortOperSpeed
Indicate this port's current speed value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.15
rcPortMltId
Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.16
rcPortLocked
Indicate whether this port is locked.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.17
rcPortAutoNegotiationSupported
Indicate whether this port can support auto-negotiation.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.18
rcPortSingleRoutablePort
Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.19
rcPortUnknownMacDiscard
If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC addre…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.20
rcPortNumStateTransition
# state transitions.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2272.1.4.10.1.1.21
rcPortQosLevel
Used to specify the Qos level packets, carried on this port, should be processed with.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.30
rcPortDiffServEnable
Used to enable/disable the Differentiated Service feature on this port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.31
rcPortDiffServType
Used to specify the Differentiated Service type for this port.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.32
rcPortVendorDescr
Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.
columnOctetString.1.3.6.1.4.1.2272.1.4.10.1.1.34
rcPortName
This port's name.
columnOctetString.1.3.6.1.4.1.2272.1.4.10.1.1.35
rcPortAdminRouting
Indicate whether the port is routable.
columnEnableValue.1.3.6.1.4.1.2272.1.4.10.1.1.43
rcPortOperRouting
The status of the port whether is routable.
columnEnableValue.1.3.6.1.4.1.2272.1.4.10.1.1.44
rcPortIeee8021POverrideEnable
Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p value from a tagged frame may not be honored.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.46
rcPortHighSecureEnable
Enable/Disable high secure feature.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.51
rcPortMrouteStrLimit
maximum number of multicast streams that are allowed to ingress to CPU through this port.
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.55
rcPortMrouteStrTimerCheck
sampling period to check number of multicast streams that has ingressed CPU through this port in seconds.
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.56
rcPortMrouteStrLimitEnable
enable or disable mroute stream limit on port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.57
rcPortAction
Port related actions.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.6
rcPortAutoNegAd
This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duple…
columnBits.1.3.6.1.4.1.2272.1.4.10.1.1.62
rcPortAutoRecoverPort
enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.4.10.1.1.64
rcPortEgressRateLimit
Egress Rate Limit. for VSP 9000, range is 10000 to 10000000
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.67
rcPortEgressRateLimitState
Used to enable/disable shape/egress-rate-limit functionality.
columnEnableValue.1.3.6.1.4.1.2272.1.4.10.1.1.68
rcPortResult
Result from the last Vlan action.
columnEnumeration.1.3.6.1.4.1.2272.1.4.10.1.1.7
rcPortIngressRateLimit
Limits the amount of traffic from this Ingress port.
columnInteger32.1.3.6.1.4.1.2272.1.4.10.1.1.85
rcPortVrfIdList
The set of VRF ids to which this port belongs.
columnOctetString.1.3.6.1.4.1.2272.1.4.10.1.1.87
rcPortVrfNameList
The set of VRF names to which this port belongs.
columnOctetString.1.3.6.1.4.1.2272.1.4.10.1.1.96
rcPortBrouterVrfId
Gives the VRF Id for this Brouter port.
columnVrfIdentifier.1.3.6.1.4.1.2272.1.4.10.1.1.97
rcPortBrouterVrfName
Gives the VRF Name for this Brouter port.
columnOctetString.1.3.6.1.4.1.2272.1.4.10.1.1.98
rcPortVrfCount
The total number of VRFs this port is associated to.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2272.1.4.10.1.1.99