HUAWEI-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
45
Rows
45
Columns
625
hwEthernetTable
table.1.3.6.1.4.1.2011.5.25.157.1.1.1
·
1 row entry
·
26 columns
This table describes the access and configuration of physical attributes of various Ethernet interfaces.
Indicates the physical attributes of the Ethernet interface.
This table lists the physical attributes of various Ethernet interfaces.
This table lists the physical attributes of various Ethernet interfaces.
Indexes
hwEthernetIfIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwEthernetIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||
|
hwEthernetLoopback
This object indicates the internal loop (local loopback) function, which is used to test a local interface. When the interface works normally, the local loopback function must be disabled. By default, stopLoopback is se…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 |
||||||||||||||||||||||||||||||||||
|
hwEthernetPortType
This object indicates the type of an Ethernet interface, either the optical interface or the electrical interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 |
||||||||||||||||||||||||||||||||||
|
hwEthernetSpeedSet
This object indicates the transmission rate of the Ethernet interface. You can configure transmission rates for only certain Ethernet electrical interfaces, and you cannot configure transmission rates for optical interf…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 |
||||||||||||||||||||||||||||||||||
|
hwEthernetDuplex
This object indicates the duplex mode of an Ethernet interface. Ethernet electrical interfaces can work in either half-duplex or full-duplex mode. Ethernet optical interfaces can work only in full-duplex mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 |
||||||||||||||||||||||||||||||||||
|
hwEthernetNegotiation
This object indicates whether auto-negotiation is enabled on an Ethernet electrical interface.
The default value is enable. For an Ethernet electrical interface, hwEthernetSpeedSet, hwEthernetDuplex, and hwEthernetNego… |
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 |
||||||||||||||||||||||||||||||||||
|
hwEthernetPortTypeOperate
This object indicates the link type of an Ethernet interface, either optical fibers or cables. This object is only supported by certain Ethernet interfaces.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 |
||||||||||||||||||||||||||||||||||
|
hwEthernetClock
This object indicates the clock mode. By default, the slave clock mode is used. Only WAN interfaces require the clock configuration.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ0Mode
This object indicates that 10GE WAN interfaces have to use SDH/SONET as the frame format and the overhead byte has to be set. The overhead byte of an SDH frame can be: j0: indicates the section trace byte. The default v…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ0Value
This object indicates that when hwEthernetFlagJ0Mode is set to j01ByteMode, this object takes effect.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ0Trace
This object indicates the section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect.
When hwEthernetFlagJ0Mode is set to j016ByteMode, the value of hwEthernetFl… |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ1Mode
This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. By default, the value is j116ByteMode(2): hwEthernetFlagJ1Trace: NetEngine.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ1Value
This object indicates that when hwEthernetFlagJ1Mode is set to j11ByteMode, this object takes effect.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagJ1Trace
This object indicates the path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwEthernetFlagJ1Mode is set to j116ByteMode, the value of this object is …
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlagC2Value
This object indicates the overhead byte of the SDH frame.
C2: indicates the path signal label byte. The value ranges from 00 to FF, in the hexadecimal format. The default value is 26 (0x1a). |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 |
||||||||||||||||||||||||||||||||||
|
hwEthernetUpHoldTime
This object indicates the time period during which the interface remains Up.
|
Integer32r/w Constraints: range: 0-86400000 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 |
||||||||||||||||||||||||||||||||||
|
hwEthernetDownHoldTime
This object indicates the time period during which the interface remains Down.
|
Integer32r/w Constraints: range: 0-86400000 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 |
||||||||||||||||||||||||||||||||||
|
hwEthernetSubinterfaceStatisticEnable
This object indicates statistics collection is enabled for a sub-interface.
|
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 |
||||||||||||||||||||||||||||||||||
|
hwEthernetFlowControl
This object indicates the interface flow control status.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 |
||||||||||||||||||||||||||||||||||
|
hwEthernetOffline
This object indicates that the physical protocol status of an interface is Down.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 |
||||||||||||||||||||||||||||||||||
|
hwEthernetSetTransferMode
This object indicates the LAN-WAN mode of an Ethernet interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 |
||||||||||||||||||||||||||||||||||
|
hwEthernetJumboframeMaxLength
This object indicates the maximum length of the Jumbo frame on an interface.
|
Integer32r/w Constraints: range: 1518-16000 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 |
||||||||||||||||||||||||||||||||||
|
hwEthernetComboType
combo mode of this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38 |
||||||||||||||||||||||||||||||||||
|
hwEthernetPortMode
Indicates combo mode of this port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 |
||||||||||||||||||||||||||||||||||
|
hwEthernetNegotiationMode
Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 |
||||||||||||||||||||||||||||||||||
|
hwEthernetCarrierTransitions
Number of times the interface state has transitioned from up to down since the time the device restarted.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.41 |
hwPosTable
table.1.3.6.1.4.1.2011.5.25.157.1.2.1
·
1 row entry
·
14 columns
This table describes the access and configuration of physical attributes of various POS interfaces.
Indicates the physical attributes of the POS interface.
This table lists the physical attributes of the POS interface.
This table lists the physical attributes of the POS interface.
Indexes
hwPosIfIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPosIfIndex
Interface index(es) of port(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1 |
||||||||||
|
hwPosLinkProtocol
This object indicates the link layer protocol running on a POS interface. By default, a POS interface uses PPP as the link layer protocol.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11 |
||||||||||
|
hwPosFrameFormat
This object indicates the frame type on a POS interface. By default, the frame type is SDH.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12 |
||||||||||
|
hwPosLoopback
This object indicates the internal loop (local loopback) function on a POS interface, which is used to test a local interface.
When the interface works normally, the local loopback function must be disabled. By default… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13 |
||||||||||
|
hwPosScramble
This object indicates whether the payload scramble function is enabled on a POS interface. By default, the scramble function is enabled.
|
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14 |
||||||||||
|
hwPosClock
This object indicates the clock mode. By default, the slave clock mode is used.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15 |
||||||||||
|
hwPosCrcVerifyCode
This object indicates the length of the CRC field. By default, the length is 32.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16 |
||||||||||
|
hwPosFlagJ0Mode
This object indicates the overhead byte of an SDH frame. The value can be:
j0: indicates the section trace byte. The default value is j016ByteMode(2). hwEthernetFlagJ0Trace: NetEngine. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21 |
||||||||||
|
hwPosFlagJ0Value
This object indicates that when hwPosFlagJ0Mode is set to j01ByteMode, this object takes effect.
|
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22 |
||||||||||
|
hwPosFlagJ0Trace
This object indicates the section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect.
When hwPosFlagJ0Mode is set to j016ByteMode, the value of hwPosFlagJ0Mode is up… |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23 |
||||||||||
|
hwPosFlagJ1Mode
This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. The default value is j116ByteMode(2). hwPosFlagJ1Trace: NetEngine.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24 |
||||||||||
|
hwPosFlagJ1Value
This object indicates the j1-1byte-mode value. When hwPosFlagJ1Mode is set to j11ByteMode, this object takes effect.
|
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25 |
||||||||||
|
hwPosFlagJ1Trace
This object indicates the path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect.
When hwPosFlagJ1Mode is set to j116ByteMode, the value of hwPosFlagJ1Mode is up to… |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26 |
||||||||||
|
hwPosFlagC2Value
This object indicates the overhead byte of an SDH frame. C2 indicates the path signal label byte. The value ranges from 00 to FF in the hexadecimal format. The default value is 22 (0x16).
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27 |
hwCposTable
table.1.3.6.1.4.1.2011.5.25.157.1.3.1
·
1 row entry
·
31 columns
Indicates the physical attributes of the CPOS interface. This table lists the physical attributes of the CPOS interface.
Indicates the physical attributes of the CPOS interface.
This table lists the physical attributes of the CPOS interface.
This table lists the physical attributes of the CPOS interface.
Indexes
hwCposIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwCposIfIndex
Interface index(es) of port(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1 |
||||||||
|
hwCposClock
Indicates whether the clock is in master mode or slave mode.
By default, the clock is in slave mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11 |
||||||||
|
hwCposIfType
Indicates the interface type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12 |
||||||||
|
hwCposFrameFormat
Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13 |
||||||||
|
hwCposMultiplex
Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14 |
||||||||
|
hwCposLoopback
Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15 |
||||||||
|
hwCposFlagJ0Mode
Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21 |
||||||||
|
hwCposFlagJ0Value
j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect.
|
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22 |
||||||||
|
hwCposFlagJ0Trace
Set section trace byte.
When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwCposFlagJ0Mode is set to j016ByteMode, this variable is up to 15 characters trace byte. When… |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23 |
||||||||
|
hwCposFlagJ1Mode
Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24 |
||||||||
|
hwCposFlagJ1Value
Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect.
|
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25 |
||||||||
|
hwCposFlagJ1Trace
Set path trace byte.
When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect. When hwCposFlagJ1Mode is set to j116ByteMode, this variable is a string up to 15 characters trace byte… |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26 |
||||||||
|
hwCposFlagC2Value
Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27 |
||||||||
|
hwCposB1SdAlarmThreshold
The threshold of B1 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28 |
||||||||
|
hwCposB1ExcAlarmThreshold
The threshold of B1 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29 |
||||||||
|
hwCposB2SdAlarmThreshold
The threshold of B2 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30 |
||||||||
|
hwCposB2ExcAlarmThreshold
The threshold of B2 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31 |
||||||||
|
hwCposB3SdAlarmThreshold
The threshold of B3 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32 |
||||||||
|
hwCposB3ExcAlarmThreshold
The threshold of B3 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33 |
||||||||
|
hwCposLpBipSdAlarmThreshold
The threshold of BIP2 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34 |
||||||||
|
hwCposLpBipExcAlarmThreshold
The threshold of BIP2 threshold crossing alarm.
|
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35 |
||||||||
|
hwCposHighPathNumber
Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36 |
||||||||
|
hwCposLowPathNumber
Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF. The default value is 22(0x16). |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37 |
||||||||
|
hwCposMappingMode
Indicates the mapping mode of cpos port, default if h-mode(1).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38 |
||||||||
|
hwCposRxJ0Mode
Indicates the received J0 mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39 |
||||||||
|
hwCposRxJ1Mode
Indicates the received J1 mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40 |
||||||||
|
hwCposRxJ0Value
Indicates the received J0 value of 1-byte mode.
|
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41 |
||||||||
|
hwCposRxJ1Value
Indicates the received J1 value of 1-byte mode.
|
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42 |
||||||||
|
hwCposRxJ0Trace
Indicates the received J0 characters of 16-byte or 64-byte mode.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43 |
||||||||
|
hwCposRxJ1Trace
Indicates the received J1 characters of 16-byte or 64-byte mode.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44 |
||||||||
|
hwCposVc4Flag
The value of this object identifies whether a VC4 channel can be created on the CPOS interface.
0 indicates that no VC4 channel can be created on the CPOS interface. 1 indicates that a VC4 channel can be created but ha… |
Integer32 Constraints: range: 0-2 |
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45 |
hwCposLpTable
table.1.3.6.1.4.1.2011.5.25.157.1.3.4
·
1 row entry
·
8 columns
Description.
Description.
Indexes
hwCposLpIfIndex hwCposLpId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwCposLpIfIndex
Description.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.1 |
||||
|
hwCposLpId
Description.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.2 |
||||
|
hwCposFlagJ2Mode
Description.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.3 |
||||
|
hwCposFlagJ2Value
Description.
|
Integer32r/w Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.4 |
||||
|
hwCposFlagJ2Trace
Description.
|
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.5 |
||||
|
hwCposRxJ2Mode
Indicates the received J2 mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.6 |
||||
|
hwCposRxJ2Value
Indicates the received J2 value of 1-byte mode.
|
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.7 |
||||
|
hwCposRxJ2Trace
Indicates the received J2 characters of 16-byte or 64-byte mode.
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.2011.5.25.157.1.3.4.1.8 |
hwDs0ChannelBundleTable
table.1.3.6.1.4.1.2011.5.25.157.1.4.1
·
1 row entry
·
11 columns
This table is used to bundle timeslots of CE1/CT1 interfaces.
This table is used to bundle timeslots of CE1/CT1 interfaces.
Indexes
hwDs0ChannelBundleParentIfIndex hwDs0ChannelBundleDs1ChannelId hwDs0ChannelBundleId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDs0ChannelBundleParentIfIndex
Indicates the index of the parent interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.1 |
||||||||||||
|
hwDs0ChannelBundleDs1ChannelId
Indicates the channel ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.2 |
||||||||||||
|
hwDs0ChannelBundleId
Indicates the index number of the channel set.
|
Integer32 Constraints: range: 0-30 |
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.3 |
||||||||||||
|
hwDs0ChannelBundleIfIndex
Indicates the index of the serial interface formed by the timeslot binding.
|
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.11 |
||||||||||||
|
hwDs0ChannelBundleTimeSlots
Indicates the number of the range of the timeslot to be bound.
The value is an integer ranging from 0 to 31. Multiple timeslots are separated by ','. The range of timeslot is expressed by using '-'. For E1 card mode: If… |
OctetStringr/w Constraints: range: 0-61 |
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.12 |
||||||||||||
|
hwDs0ChannelBundleSpeed
Configures the mode to configure the timeslots.
If the parameter 56 k is selected, the timeslots are bound in the mode of N x 56 kbit/s. If the parameter 64 k is selected, the timeslots are bound in the mode of N x 64 k… |
kilo bytesEnumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.13 |
||||||||||||
|
hwDs0ChannelBundleTimeSlot0
Indicates the timeslot0 to be bound or a single channel.
The ture value indicates it will be create TDM channel. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.14 |
||||||||||||
|
hwDs0ChannelBundleIsMasterPW
Indicates if the pw configed on this port is master pw.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.15 |
||||||||||||
|
hwDs0ChannelBundleMasterPWStatus
Indicates the status of master pw.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.16 |
||||||||||||
|
hwDs0ChannelBundlePortName
Port name.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.4.1.1.17 |
||||||||||||
|
hwDs0ChannelBundleRowStatus
This variable is used to create or delete an object.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.4.1.1.51 |
hwDs1Table
table.1.3.6.1.4.1.2011.5.25.157.1.5.1
·
1 row entry
·
19 columns
This table lists all E1/CE1 interfaces or T1/CT1 interfaces. After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 interfaces.
This table lists all E1/CE1 interfaces or T1/CT1 interfaces.
After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used
to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 inter…
After the mode of E3/CE3 interfaces or T3/CT3 interfaces is set to channelized, this table can be used
to create E1/CE1, or T1/CT1, or E3/CE3, or T3/CT3 inter…
Indexes
hwDs1ParentIfIndex hwDs1ChannelId hwDs1IfIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDs1ParentIfIndex
Indicates the index of the parent interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1 |
||||||||||||||
|
hwDs1ChannelId
Indicates the channel ID.
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2 |
||||||||||||||
|
hwDs1IfIndex
Indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3 |
||||||||||||||
|
hwDs1ChannelType
Indicates the interface type. The type can be E1/CE1 or T1/CT1.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11 |
||||||||||||||
|
hwDs1IfType
Indicates the interface tyep.
e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM interfaces. none: indicates the physical inte… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12 |
||||||||||||||
|
hwDs1Channelized
Indicates the working mode of the interface.
true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13 |
||||||||||||||
|
hwDs1CodeType
Indicates the code type of the interface.
ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14 |
||||||||||||||
|
hwDs1Clock
Indicates the clock mode of the interface.
master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15 |
||||||||||||||
|
hwDs1FrameFormat
Indicates the frame format of the interface.
crc4: indicates that the frame format is CRC4. no-crc4: indicates that the frame format is no-CRC4. sf: indicates that the frame format is Super Frame. esf: indicates that th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16 |
||||||||||||||
|
hwDs1Cable
The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable.
The default is short. If no cable is connected, this parameter is displayed as null. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17 |
||||||||||||||
|
hwDs1Loopback
Enable the loopback function of the interface.
local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cel… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18 |
||||||||||||||
|
hwDs1ClockRecoveryDomain
Indicates the clock recovery domain of the interface.
|
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19 |
||||||||||||||
|
hwDs1PWClockDomain
Indicates the clock recovery domain of the interface.
|
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20 |
||||||||||||||
|
hwDs1WorkMode
Indicates the clock recovery domain of the interface.
|
Integer32 Constraints: range: 0-8 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21 |
||||||||||||||
|
hwDs1EsAlarmTriggerThreshold
The trigger threshold of code violation count threshold crossing alarm of E1 line side .
|
Integer32r/w Constraints: range: 1-900 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22 |
||||||||||||||
|
hwDs1EsAlarmResumeThreshold
The resume threshold of code violation count threshold crossing alarm of E1 line side .
|
Integer32r/w Constraints: range: 1-900 |
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23 |
||||||||||||||
|
hwDs1RowStatus
This variable is used to create or delete an object.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51 |
||||||||||||||
|
hwDs1Lbo
The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52 |
||||||||||||||
|
hwDs1CableLength
The cableLength of T1 port. Unit: feet.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53 |
hwDs3Table
table.1.3.6.1.4.1.2011.5.25.157.1.6.1
·
1 row entry
·
14 columns
This table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
This table lists all E3/CE3 interfaces or all T3/CT3 interfaces.
Indexes
hwDs3ParentIfIndex hwDs3ChannelId hwDs3IfIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDs3ParentIfIndex
Indicates the index of the parent interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.1 |
||||||||||||||
|
hwDs3ChannelId
Indicates the index of the parent interface.
|
Integer32 Constraints: range: 0-3 |
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.2 |
||||||||||||||
|
hwDs3IfIndex
Indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.3 |
||||||||||||||
|
hwDs3ChannelType
Indicates the interface type. The type can be E3/CE3 or T3/CT3.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.11 |
||||||||||||||
|
hwDs3IfType
Indicates the parent interface type of the interface.
cpos: is multiplexed by CPOS interfaces. none: indicates the interface is a physical interface. The default is none. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.12 |
||||||||||||||
|
hwDs3Channelized
Indicates the working mode of the interface.
true: indicates the channelized mode. false: indicates the clear channel mode. The default is true. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.13 |
||||||||||||||
|
hwDs3Clock
Indicates the clock mode of the interface.
master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.14 |
||||||||||||||
|
hwDs3FrameFormat
Indicates the frame format of the interface.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.15 |
||||||||||||||
|
hwDs3Scramble
Indicates the scramble function of the interface.
true: enables the scramble function. false: disables the scramble function. The default is false. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.16 |
||||||||||||||
|
hwDs3Cable
The cable command takes effect only if the E3 interface card uses 75-ohm coaxial cable.
The default is short. If no cable is connected, this parameter is displayed as null. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.17 |
||||||||||||||
|
hwDs3NationalBit
Indicates the national bit of the E3/CE3 interface.
n0: indicates the national bit is 0 and the interface supports only the communication within a country. n1: indicates the national bit is 1 and the interface supports … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.18 |
||||||||||||||
|
hwDs3Loopback
Enable the loopback function of the interface.
local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. cel… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.19 |
||||||||||||||
|
hwDs3CreateSerial
Create serial interface from Ds3 interface.
True create serial interface. False destroy serial interface. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.20 |
||||||||||||||
|
hwDs3RowStatus
This variable is used to create or delete an object.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.6.1.1.51 |
hwBundleSerialTable
table.1.3.6.1.4.1.2011.5.25.157.1.7.1
·
1 row entry
·
5 columns
Indicates the attribute of the serial interface formed by timeslots. This table lists the physical attributes of the serial interface.
Indicates the attribute of the serial interface formed by timeslots.
This table lists the physical attributes of the serial interface.
This table lists the physical attributes of the serial interface.
Indexes
hwBundleSerialIfIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwBundleSerialIfIndex
Interface index(es) of serial(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.1 |
||||||||||||||||
|
hwBundleSerialLinkProtocol
The link-protocol of interface. The serial(s) always use PPP as its link-protocol for default.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.11 |
||||||||||||||||
|
hwBundleSerialTimerHold
Indicates the interval for sending Keepalive packets from the serial interface to the peer.
The default is 10 seconds. |
Integer32r/w Constraints: range: 0-32767 |
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.12 |
||||||||||||||||
|
hwBundleSerialLoopback
true: enables the loopback on the serial interface.
false: disables the loopback on the serial interface. By default, the loopback on the serial interface is disabled. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.13 |
||||||||||||||||
|
hwBundleSerialCrcVerifyCode
Indicates the length of the CRC verify code. The default is 32.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.7.1.1.14 |
hwPhysicalPortTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.1
·
1 row entry
·
50 columns
This table describes the access and configuration of attributes of various physical interfaces.
Indicates the attribute of the physical port.
Indexes
hwPhysicalPortIfIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPhysicalPortIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 |
||||||||||||||
|
hwPhysicalPortDelayTime
This object indicates the interface delay. The default value is 0 ms.
|
Unsigned32r/w Constraints: range: 0-86400000 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 |
||||||||||||||
|
hwPhysicalPortDelayRemainTime
This object indicates the remaining time after the interface delay is enabled. The value is in milliseconds.
|
Unsigned32 Constraints: range: 0-86400000 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 |
||||||||||||||
|
hwPhysicalPortName
Indicates the physical port name.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 |
||||||||||||||
|
hwPhysicalPortInChassis
Indicates the physical port in chassis.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5 |
||||||||||||||
|
hwPhysicalPortInSlot
Indicates the SlotID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 |
||||||||||||||
|
hwPhysicalPortInCard
Indicates the CardID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 |
||||||||||||||
|
hwPhysicalPortInPort
Indicates the PortID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8 |
||||||||||||||
|
hwPhysicalAutoShutLaserEnable
This object indicates the automatic disabling of LASER. By default, automatic disabling of LASER is not supported.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 |
||||||||||||||
|
hwPhysicalAutoShutLaserOpenInterval
This object indicates the enabling interval for the automatic disabling of LASER. The default value is 2000 ms. The value 2147483647 indicates that the interface does not support this function.
|
Integer32r/w Constraints: range: 100-300range: 2147483647-2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 |
||||||||||||||
|
hwPhysicalAutoShutLaserCloseInterval
This object indicates the disabling interval for the automatic disabling of LASER. The default value is 60000 ms. The value 2147483647 indicates that the interface does not support this function.
|
Integer32r/w Constraints: range: 200-30000range: 2147483647-2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 |
||||||||||||||
|
hwPhysicalAutoShutLaserLongOpenInterval
This object indicates the long enabling interval for the automatic disabling of LASER. The default value is 90000 ms. The value 2147483647 indicates that the interface does not support this function.
|
Integer32r/w Constraints: range: 200-30000range: 2147483647-2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 |
||||||||||||||
|
hwPhysicalLoopbackType
This object indicates the current interface status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 |
||||||||||||||
|
hwPhysicalShutLaser
This object indicates whether the LASER function is enabled or not.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 |
||||||||||||||
|
hwPhysicalLaserStatus
This object indicates the LASER status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 |
||||||||||||||
|
hwPhysicalPortHoldUp
This object indicates whether the interface is Up.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 |
||||||||||||||
|
hwPhysicalPortAlarmInverseEnable
Config port alarm inverse enable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17 |
||||||||||||||
|
hwPhysicalPortInVsId
VsId.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18 |
||||||||||||||
|
hwPhysicalPortAlarmName
Indicates the physical port alarm name.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19 |
||||||||||||||
|
hwInputRateChangeThresholdPercent
Indicates the threshold for the input rate change, in percentage.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20 |
||||||||||||||
|
hwOutputRateChangeThresholdPercent
Indicates the threshold for the output rate change, in percentage.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21 |
||||||||||||||
|
hwCurrentStatisticalPeriodRate
Indicates the rate in the current statistical period.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22 |
||||||||||||||
|
hwLastStatisticalPeriodRate
Indicates the rate in the last statistical period.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23 |
||||||||||||||
|
hwPortPhysicalRate
Indicates the current physical rate.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24 |
||||||||||||||
|
hwLicenseType
Indicates the type of interface function-controlled license.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25 |
||||||||||||||
|
hwMaxPortNum
Indicates the Maximum number of available interfaces
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26 |
||||||||||||||
|
hwUsedPortNum
Indicates the Number of interfaces in use.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27 |
||||||||||||||
|
hwPhysicalPortMode
The current state of portMode in port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28 |
||||||||||||||
|
hwScadaGroupId
Indicates the scada group ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29 |
||||||||||||||
|
hwPhysicalPortGroupID
Indicates the physical port group ID.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 |
||||||||||||||
|
hwPortTransModeReasonDescr
Indicates the physical port transmission mode different reason.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 |
||||||||||||||
|
hwAcBlockReason
Indicates the AC block reason.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32 |
||||||||||||||
|
hwPhysicalPortLocalPhyNum
Indicates the local physical port phy number.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.33 |
||||||||||||||
|
hwPhysicalPortRemotePhyNum
Indicates the remote physical port phy number.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.34 |
||||||||||||||
|
hwPhysicalPortLocalGroupID
Indicates the local physical port groupID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.35 |
||||||||||||||
|
hwPhysicalPortRemteGroupID
Indicates the remote physical port groupID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.36 |
||||||||||||||
|
hwPhysicalPortBW
Indicates the local port bandwidth
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.37 |
||||||||||||||
|
hwPhysicalPortList
Indicates the physical port list
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38 |
||||||||||||||
|
hwPhysicalPortPortType
Indicates the physical port type
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.39 |
||||||||||||||
|
hwPhysicalPortAlarmReason
Indicates the physical port alarm reason
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.40 |
||||||||||||||
|
hwInputDiscardEnable
Indicates whether input discard traps should be
generated for this physical port. By default, the value is disabled. |
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.41 |
||||||||||||||
|
hwInputDiscardThreshold
Indicates the physical port input discard threshold, the default is 3000 packets
|
Unsigned32r/w Constraints: range: 100-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.42 |
||||||||||||||
|
hwInputDiscardInterval
Indicates the physical port input discard interval, it must be a multiple of 10, the default is 300 seconds
|
Integer32r/w Constraints: range: 60-86400 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.43 |
||||||||||||||
|
hwInputDiscardStatistics
Indicates the physical port input discard statistics
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.44 |
||||||||||||||
|
hwOutputDiscardEnable
Indicates whether output discard traps should be
generated for this physical port. By default, the value is disabled. |
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.45 |
||||||||||||||
|
hwOutputDiscardThreshold
Indicates the physical port output discard threshold, the default is 3000 packets
|
Unsigned32r/w Constraints: range: 100-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.46 |
||||||||||||||
|
hwOutputDiscardInterval
Indicates the physical port output discard interval, it must be a multiple of 10, the default is 300 seconds
|
Integer32r/w Constraints: range: 60-86400 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.47 |
||||||||||||||
|
hwOutputDiscardStatistics
Indicates the physical port output discard statistics
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.48 |
||||||||||||||
|
hwBandwidthLast
Indicates the physical port last bandwidth.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.49 |
||||||||||||||
|
hwBandwidthCurrent
Indicates the physical port current bandwidth.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.50 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2
·
1 row entry
·
14 columns
This table describes functions of physical interfaces.
Indicates the performance stat of the Regenerator Section.
Indexes
hwSDHRsMsPerfCurrentIfIndex hwSDHRsMsPerfCurrentDataIndex
| Column | Syntax | OID |
|---|---|---|
|
hwSDHRsMsPerfCurrentIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.1 |
|
hwSDHRsMsPerfCurrentDataIndex
This object indicates the data index.
|
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.2 |
|
hwSDHRsPerfCurrentBBE
This object indicates the regenerator section (RS) background block error.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.3 |
|
hwSDHRsPerfCurrentES
This object indicates the number of seconds that the RS error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.4 |
|
hwSDHRsPerfCurrentSES
This object indicates the number of seconds that the severe RS error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.5 |
|
hwSDHRsPerfCurrentUAS
This object indicates the number of seconds that the RS does not exist.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.6 |
|
hwSDHMsPerfCurrentBBE
This object indicates the multi-section background block error.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.7 |
|
hwSDHMsPerfCurrentES
This object indicates the number of seconds that the multi-section error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.8 |
|
hwSDHMsPerfCurrentSES
This object indicates the number of seconds that the severe multi-section error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.9 |
|
hwSDHMsPerfCurrentUAS
This object indicates the number of seconds that the multi-section does not exist.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.10 |
|
hwSDHMsPerfCurrentFEBBE
This object indicates the multi-section remote background block error.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.11 |
|
hwSDHMsPerfCurrentFEES
This object indicates the number of seconds that the multi-section remote error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.12 |
|
hwSDHMsPerfCurrentFESES
This object indicates the number of seconds that the severe multi-section remote error lasts.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.13 |
|
hwSDHMsPerfCurrentFEUAS
This object indicates the number of seconds that the multi-section remote error does not exist.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.2.1.14 |
hwSDHHpPerfCurrentTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.3
·
1 row entry
·
11 columns
This table describes functions of physical interfaces.
Indicates the performance stat of the Higher order Path.
Indexes
hwSDHHpPerfCurrentIfIndex hwSDHHpPerfCurrentHpIndex hwSDHHpPerfCurrentDataIndex
| Column | Syntax | OID |
|---|---|---|
|
hwSDHHpPerfCurrentIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.1 |
|
hwSDHHpPerfCurrentHpIndex
This object indicates the higher order path (HP) index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.2 |
|
hwSDHHpPerfCurrentDataIndex
This object indicates the data index.
|
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.3 |
|
hwSDHHpPerfCurrentBBE
This object indicates the background errored block of the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.4 |
|
hwSDHHpPerfCurrentES
This object indicates the number of errored seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.5 |
|
hwSDHHpPerfCurrentSES
This object indicates the number of severe errored seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.6 |
|
hwSDHHpPerfCurrentUAS
This object indicates the number of unavailable seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.7 |
|
hwSDHHpPerfCurrentFEBBE
This object indicates the remote background errored block on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.8 |
|
hwSDHHpPerfCurrentFEES
This object indicates the number of remote errored seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.9 |
|
hwSDHHpPerfCurrentFESES
This object indicates the number of severe remote errored seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.10 |
|
hwSDHHpPerfCurrentFEUAS
This object indicates the number of remote unavailable seconds on the HP.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.3.1.11 |
hwSDHLpPerfCurrentTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.4
·
1 row entry
·
12 columns
This table describes the access and configuration of physical attributes of lower order paths (LPs).
Indicates the performance stat of the Low order Path.
Indexes
hwSDHLpPerfCurrentIfIndex hwSDHLpPerfCurrentHpIndex hwSDHLpPerfCurrentLpIndex hwSDHLpPerfCurrentDataIndex
| Column | Syntax | OID |
|---|---|---|
|
hwSDHLpPerfCurrentIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.1 |
|
hwSDHLpPerfCurrentHpIndex
This object indicates the HP index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.2 |
|
hwSDHLpPerfCurrentLpIndex
This object indicates the lower order path (LP) index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.3 |
|
hwSDHLpPerfCurrentDataIndex
This object indicates the data index.
|
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.4 |
|
hwSDHLpPerfCurrentBBE
This object indicates the background errored block of the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.5 |
|
hwSDHLpPerfCurrentES
This object indicates the number of errored seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.6 |
|
hwSDHLpPerfCurrentSES
This object indicates the number of severe errored seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.7 |
|
hwSDHLpPerfCurrentUAS
This object indicates the number of unavailable seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.8 |
|
hwSDHLpPerfCurrentFEBBE
This object indicates the the remote background errored block of the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.9 |
|
hwSDHLpPerfCurrentFEES
This object indicates the number of remote errored seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.10 |
|
hwSDHLpPerfCurrentFESES
This object indicates the number of remote errored seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.11 |
|
hwSDHLpPerfCurrentFEUAS
This object indicates the number of unavailable seconds on the lower order path (LP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.4.1.12 |
hwPDHPerfCurrentTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.5
·
1 row entry
·
7 columns
This table describes functions of physical interfaces.
Indicates the performance stat of the E1 line side.
Indexes
hwPDHPerfCurrentIfIndex hwPDHPerfCurrentDataIndex
| Column | Syntax | OID |
|---|---|---|
|
hwPDHPerfCurrentIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.1 |
|
hwPDHPerfCurrentDataIndex
This object indicates the data index.
|
Integer32 Constraints: range: 0-1 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.2 |
|
hwPDHPerfCurrentBBE
This object indicates the background errored block of the higher order path (HP).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.3 |
|
hwPDHPerfCurrentES
This object indicates the number of errored seconds on the E1 line code.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.4 |
|
hwPDHPerfCurrentSES
This object indicates the number of severe errored seconds on the E1 line code.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.5 |
|
hwPDHPerfCurrentUAS
This object indicates the number of seconds for the loss of signals on the E1 line code.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.6 |
|
hwPDHPerfCurrentLCV
This object indicates the number of errors on the E1 line code.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.5.1.7 |
hwEthPortStatTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.6
·
1 row entry
·
9 columns
This table describes the output of error packets and packet length configuration.
Indicates the stat of the ethernet interface.
Indexes
hwEthPortStatIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwEthPortStatIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.1 |
|
hwEthPortStatBadBytes
This object indicates the statistics about the Badtypes errors.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.2 |
|
hwEthPortStatOutPut64Bytes
This object indicates the number of output data packets each with a length less than or equal to 64 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.3 |
|
hwEthPortStatOutPut65to127Bytes
This object indicates the number of output data packets each with a length ranging from 65 bytes to 127 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.4 |
|
hwEthPortStatOutPut128to255Bytes
This object indicates the number of output data packets each with a length ranging from 128 bytes to 255 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.5 |
|
hwEthPortStatOutPut256to511Bytes
This object indicates the number of output data packets each with a length ranging from 256 bytes to 511 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.6 |
|
hwEthPortStatOutPut512to1023Bytes
This object indicates the number of output data packets each with a length ranging from 512 bytes to 1023 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.7 |
|
hwEthPortStatOutPut1024to1518Bytes
This object indicates the number of output data packets each with a length ranging from 1024 bytes to 1518 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.8 |
|
hwEthPortStatOutPut1519toMaxBytes
This object indicates the number of sent data packets each with a length greater than or equal to 1519 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.8.6.1.9 |
hwEthOamPortLinkTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.8
·
1 row entry
·
2 columns
Set the physical port close enable(1) disable(2) by EthOam.
Set the physical port close enable(1) disable(2) by EthOam.
Indexes
hwPhysicalPortIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwMepId
the ID of the MEP.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.8.8.1.1 |
|
hwUniName
the name of Uni interface that configed EthOam.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.8.1.2 |
hwMEthStatusTable
table.1.3.6.1.4.1.2011.5.25.157.1.8.9
·
1 row entry
·
4 columns
Get management port status.
Get management port status.
Indexes
hwMethIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwMethIfIndex
Interface index(es) of physical port(s) present on the device.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.8.9.1.1 |
||||
|
hwMEthPortName
The name of management port.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.9.1.2 |
||||
|
hwMEthPhyStatus
The status of management port is 1(up) or 0(down).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.9.1.3 |
||||
|
hwMEthIsActive
The status of management port is 1(active) or 0(inactive).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.8.9.1.4 |
hwDslGroupTable
table.1.3.6.1.4.1.2011.5.25.157.1.9.1
·
1 row entry
·
6 columns
Indicates the attributes of the dsl group.
An entry in the dsl group table.
Indexes
hwDslGroupIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDslGroupIfIndex
Interface index(es) of dsl group present on the device.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.1 |
||||||||||||
|
hwDslGroupWorkMode
The dsl group of SHD4 card can work in efm or atm mode. Default is efm.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.2 |
||||||||||||
|
hwDslGroupBisState
Bis can be enabled or disabled in ATM mode of SHD4 card.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.3 |
||||||||||||
|
hwDslGroupEncapeMode
The dsl group of AVD8 card can work in ETHoA-LLC mode or ETHoA-VCMUX mode. Default is ETHoA-LLC.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.4 |
||||||||||||
|
hwDslGroupEnable
Trigger the operation of binding dsl link(s) to the dsl group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.5 |
||||||||||||
|
hwDslGroupRowStatus
An object that allows entries in this table to
be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be reject… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.1.1.60 |
hwDslGroupBoundVeTable
table.1.3.6.1.4.1.2011.5.25.157.1.9.2
·
1 row entry
·
6 columns
Indicates the attributes of the dsl group bound virtual-ethernet.
An entry in the dsl group bound vitrual-ethernet table.
Indexes
hwDslGroupIfIndexOfBound hwDslGroupPvcId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDslGroupIfIndexOfBound
Interface index(es) of dsl group present on the device.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.1 |
||||||||||||
|
hwVirtualEthernetIfIndex
The first virtual ethernet interface which the dsl group is bound to.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.2 |
||||||||||||
|
hwDslGroupVpi
VPI value of the 1st PVC pair.
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.3 |
||||||||||||
|
hwDslGroupVci
VCI value of the 1st PVC pair.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.4 |
||||||||||||
|
hwDslGroupPvcId
Identifier for VPI/VCI Pair.
|
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.5 |
||||||||||||
|
hwBoundVeRowStatus
obsolete
An object that allows entries in this table to
be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be reject… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.2.1.50 |
hwDslGroupBindVeTable
table.1.3.6.1.4.1.2011.5.25.157.1.9.3
·
1 row entry
·
3 columns
Indicates the relation of the dsl group binding virtual-ethernet.
An entry in the dsl group binding vitrual-ethernet table.
Indexes
hwDslGroupInterfaceIndex hwVirtualEthernetInterfaceIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDslGroupInterfaceIndex
Interface index(es) of the dsl group present on the device.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.1 |
||||||||||||
|
hwVirtualEthernetInterfaceIndex
The virtual ethernet interface index which the dsl group is bound to.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.2 |
||||||||||||
|
hwBindVeRowStatus
An object that allows entries in this table to
be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be reject… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.9.3.1.50 |
hwDslGroupImaTable
table.1.3.6.1.4.1.2011.5.25.157.1.10.1
·
1 row entry
·
13 columns
Indicates the attributes of the dsl ima group.
An entry of the dsl ima group table.
Indexes
hwDslGroupImaIfIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwDslGroupImaIfIndex
Interface index(es) of dsl group present on the device.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.1 |
||||||||||||||||||||
|
hwDslGroupImaVersion
Version of the ima group of SHD4I card.
v0: ima protocol version 1.0; v1: ima protocol version 1.1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.2 |
||||||||||||||||||||
|
hwDslGroupImaFrameLen
Frame length of the ima group of SHD4I card. If ima protocol version is 1.0, the frame length is only 128.
|
HUAWEI-IMA-MIBImaFrameLengthr/w Textual Convention: HUAWEI-IMA-MIBImaFrameLength EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.3 |
||||||||||||||||||||
|
hwDslGroupImaReset
ima group reset for SHD4I card.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.4 |
||||||||||||||||||||
|
hwDslGroupImaTxMinLinkNum
Minimum active links number by TX direction.
|
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.5 |
||||||||||||||||||||
|
hwDslGroupImaRxMinLinkNum
Minimum active links number by RX direction.
|
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.6 |
||||||||||||||||||||
|
hwDslGroupImaNeState
The current state of the near-end ima group.
|
HUAWEI-IMA-MIBImaGroupState Textual Convention: HUAWEI-IMA-MIBImaGroupState EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.7 |
||||||||||||||||||||
|
hwDslGroupImaFeState
The current state of the far-end ima group.
|
HUAWEI-IMA-MIBImaGroupState Textual Convention: HUAWEI-IMA-MIBImaGroupState EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.8 |
||||||||||||||||||||
|
hwDslGroupImaTxCellRate
The current cell rate of ima group by TX direction.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.9 |
||||||||||||||||||||
|
hwDslGroupImaRxCellRate
The current cell rate of ima group by RX direction.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.10 |
||||||||||||||||||||
|
hwDslGroupImaTxActLinkNum
Number of active links by TX direction.
|
Integer32 Constraints: range: 0-4 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.11 |
||||||||||||||||||||
|
hwDslGroupImaRxActLinkNum
Number of active links by RX direction.
|
Integer32 Constraints: range: 0-4 |
.1.3.6.1.4.1.2011.5.25.157.1.10.1.1.12 |
||||||||||||||||||||
|
hwDslGroupImaIfName
The interface name of ima group.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.10.1.1.13 |
hwDslLinkTable
table.1.3.6.1.4.1.2011.5.25.157.1.11.1
·
1 row entry
·
5 columns
Indicates the dsl link bound relation.
An entry of the dsl link bound relation.
Indexes
hwBoundDslGroupIfIndex hwDslLinkIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwBoundDslGroupIfIndex
Interface index of dsl group which the dsl link bound to.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.1 |
||||||||||||
|
hwDslLinkIfIndex
Interface index of the dsl link device.
|
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.2 |
||||||||||||
|
hwDslLinkIfName
The interface name of the dsl link.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.11.1.1.4 |
||||||||||||
|
hwBoundDslGroupIfName
Interface index of dsl group which the dsl link bound to.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.11.1.1.5 |
||||||||||||
|
hwDslLinkBoundRowStatus
An object that allows entries in this table to
be created, modified and deleted using the RowStatus convention. A SET operation to any other attribute in this row, when this object is set to 'active' (1), MUST be reject… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.11.1.1.50 |
hwPWAlarmTable
table.1.3.6.1.4.1.2011.5.25.157.1.12.1
·
1 row entry
·
21 columns
Indicates the attributes of the PW alarm.
An entry of the PW alarm relation.
Indexes
hwPWAlarmIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwPWAlarmIfIndex
Interface index of PW alarm group.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.1 |
||||
|
hwPWCesVcID
Vc ID of PW alarm group.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.2 |
||||
|
hwPWCesVcType
Vc Type of PW alarm group.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.3 |
||||
|
hwPeerIpAddr
Peer IP Address of PW alarm group.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.4 |
||||
|
hwAlarmStatus
obsolete
Alarm status of PW alarm group.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.5 |
||||
|
hwPWAlarmRMLEnableStatus
PW control word RML of PW alarm group.
|
P-BRIDGE-MIBEnabledStatusr/w Textual Convention: P-BRIDGE-MIBEnabledStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.6 |
||||
|
hwLosAlarmTriggerThreshold
Trigger Threshold of continuous loss packets of PW alarm group.
|
Integer32r/w Constraints: range: 2-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.7 |
||||
|
hwLosAlarmResumeThreshold
Resume Threshold of continuous loss packets of PW alarm group.
|
Integer32r/w Constraints: range: 32-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.8 |
||||
|
hwPWPortName
PW port name of PW alarm group.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.12.1.1.9 |
||||
|
hwLosPktExcTriggerThreshold
Trigger threshold of lost packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.10 |
||||
|
hwLosPktExcResumeThreshold
Resume threshold of lost packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.11 |
||||
|
hwMisorderPktExcTriggerThreshold
Trigger threshold of packets lost due to the out-of-order condition of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.12 |
||||
|
hwMisorderPktExcResumeThreshold
Resume threshold of packets lost due to the out-of-order condition of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.13 |
||||
|
hwStrayPktExcTriggerThreshold
Trigger threshold of misconnected packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.14 |
||||
|
hwStrayPktExcResumeThreshold
Resume threshold of misconnected packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.15 |
||||
|
hwMalPktExcTriggerThreshold
Trigger threshold of malformed packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.16 |
||||
|
hwMalPktExcResumeThreshold
Resume threshold of malformed packets of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.17 |
||||
|
hwJtrUdrExcTriggerThreshold
Trigger threshold of jitter buffer underflows of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.18 |
||||
|
hwJtrUdrExcResumeThreshold
Resume threshold of jitter buffer underflows of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.19 |
||||
|
hwJtrOvrExcTriggerThreshold
Trigger threshold of jitter buffer overflows of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.20 |
||||
|
hwJtrOvrExcResumeThreshold
Resume threshold of jitter buffer overflows of PW alarm group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.1.1.21 |
hwAtmPWAlarmTable
table.1.3.6.1.4.1.2011.5.25.157.1.12.2
·
1 row entry
·
11 columns
Indicates the attributes of the ATM PW alarm.
An entry of the ATM PW alarm relation.
Indexes
hwAtmPWAlarmIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwAtmPWAlarmIfIndex
Interface index of ATM PW alarm group.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.1 |
|
hwAtmVcID
Vc ID of ATM PW alarm group.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.2 |
|
hwAtmVcType
Vc Type of ATM PW alarm group.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.3 |
|
hwAtmPeerIpAddr
Peer IP Address of ATM PW alarm group.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.4 |
|
hwAtmPWPortName
ATM PW port name of PW alarm group.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.12.2.1.5 |
|
hwAtmLosPktExcTriggerThreshold
Trigger threshold of lost packets of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.6 |
|
hwAtmLosPktExcResumeThreshold
Resume threshold of lost packets of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.7 |
|
hwAtmMisorderPktExcTriggerThreshold
Trigger threshold of packets lost due to the out-of-order condition of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.8 |
|
hwAtmMisorderPktExcResumeThreshold
Resume threshold of packets lost due to the out-of-order condition of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.9 |
|
hwAtmUnknownCellExcTriggerThreshold
Trigger threshold of unknown cell of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.10 |
|
hwAtmUnknownCellExcResumeThreshold
Resume threshold of unknown cell of ATM PW alarm group.
|
Integer32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.2011.5.25.157.1.12.2.1.11 |
hwSNMPTrapEnTable
table.1.3.6.1.4.1.2011.5.25.157.1.13.1
·
1 row entry
·
72 columns
Reserved nodes do not support this function temporarily.
Reserved nodes do not support this function temporarily.
Indexes
hwSNMPTrapEnIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwSNMPTrapEnIfIndex
Reserved nodes do not support this function temporarily.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.1 |
|
hwCesPWLopsEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.2 |
|
hwCesPWRemoteLosPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.3 |
|
hwCesPWOppositeRAIEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.4 |
|
hwCesPWOppositeAcfaultEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.5 |
|
hwCesPWLosPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.6 |
|
hwCesPWMisorderPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.7 |
|
hwCesPWStrayPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.8 |
|
hwCesPWMalPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.9 |
|
hwCesPWJtrUnrEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.10 |
|
hwCesPWJtrOvrEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.11 |
|
hwCesPWAllEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.12 |
|
hwPhysicalPortLosAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.13 |
|
hwPhysicalPortLofAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.14 |
|
hwRsOofAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.15 |
|
hwRsB1ExcAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.16 |
|
hwRsB1SdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.17 |
|
hwRsJ0TimAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.18 |
|
hwMsRdiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.19 |
|
hwMsB2ExcAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.20 |
|
hwMsAuLopAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.21 |
|
hwMsAisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.22 |
|
hwMsB2SdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.23 |
|
hwHpJ1TimAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.24 |
|
hwHpUneqAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.25 |
|
hwHpRdiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.26 |
|
hwHpB3ExcAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.27 |
|
hwHpPlmAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.28 |
|
hwHpB3SdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.29 |
|
hwHpAuAisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.30 |
|
hwLpTuLopAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.31 |
|
hwHpTuLomAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.32 |
|
hwLpTimAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.33 |
|
hwLpUneqAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.34 |
|
hwLpRdiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.35 |
|
hwLpBipExcAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.36 |
|
hwLpBipSdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.37 |
|
hwLpPlmAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.38 |
|
hwLpTuAisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.39 |
|
hwDs1EsExcAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.40 |
|
hwDs1RmfaAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.41 |
|
hwDs1LmfaAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.42 |
|
hwDs1AisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.43 |
|
hwDs1RdiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.44 |
|
hwRsLocAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.45 |
|
hwLpRfiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.46 |
|
hwLpV5VcaisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.47 |
|
hwVc12oofAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.48 |
|
hwVc12AlmE1RaiAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.49 |
|
hwVc12LfaAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.50 |
|
hwVc12UpE1AisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.51 |
|
hwVc12DownE1AisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.52 |
|
hwDs1DownE1AisAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.53 |
|
hwMsLpsUniBiMAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.54 |
|
hwMsK1K2MAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.55 |
|
hwMsK2MAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.56 |
|
hwVc12LmfaAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.57 |
|
hwSDHAllEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.58 |
|
hwLaserShutAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.59 |
|
hwLaserAutoShutAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.60 |
|
hwLaserAllEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.61 |
|
hwLoopbackAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.62 |
|
hwChannelLoopbackAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.63 |
|
hwLoopbackAllEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.64 |
|
hwAtmOcdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.65 |
|
hwAtmLcdAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.66 |
|
hwAtmUhcsAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.67 |
|
hwAtmChcsAlarmEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.68 |
|
hwAtmPWLosPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.69 |
|
hwAtmPWMisorderPktEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.70 |
|
hwAtmPWUnknownCellEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.71 |
|
hwAtmAllEn
Reserved nodes do not support this function temporarily.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.13.1.1.72 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1
·
1 row entry
·
64 columns
This table describes alarm statistics and alarm thresholds on interfaces.
Indicates the port alarm threshold.
This table lists the threshold of various port alarm.
This table lists the threshold of various port alarm.
Indexes
hwPhysicalPortThrIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwPhysicalPortThrIfIndex
This object indicates the index of a physical interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.1 |
||||||||
|
hwPhysicalPortThrName
This object indicates the name of a physical interface.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.2 |
||||||||
|
hwPhysicalPortCrcErrorStatistics
This object indicates the CRC error statistics.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.3 |
||||||||
|
hwPhysicalPortCrcErrorHighThreshold
This object indicates the upper threshold for the number of CRC errors. The default value is 1000 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.4 |
||||||||
|
hwPhysicalPortCrcErrorLowThreshold
This object indicates the lower threshold for the number of CRC errors. The default value is 100 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.5 |
||||||||
|
hwPhysicalPortCrcErrorInterval
This object indicates the time threshold for the CRC error alarm. The default value is 10s.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.6 |
||||||||
|
hwPhysicalPortSymbolErrorStatistics
This object indicates the number of Symbol errors.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.7 |
||||||||
|
hwPhysicalPortSymbolErrorHighThreshold
This object indicates the upper threshold for the number of Symbol errors. The default value is 1000 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.8 |
||||||||
|
hwPhysicalPortSymbolErrorLowThreshold
This object indicates the lower threshold for the number of Symbol errors. The default value is 100 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.9 |
||||||||
|
hwPhysicalPortSymbolErrorInterval
This object indicates the time threshold for the Symbol error alarm. The default value is 10s.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.10 |
||||||||
|
hwPhysicalPortInputErrorStatistics
This object indicates the number of Input errors.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.11 |
||||||||
|
hwPhysicalPortInputErrorHighThreshold
This object indicates the upper threshold for the number of Input errors. The default value is 1000 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.12 |
||||||||
|
hwPhysicalPortInputErrorLowThreshold
This object indicates the lower threshold for the number of Input errors. The default value is 100 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.13 |
||||||||
|
hwPhysicalPortInputErrorInterval
This object indicates the time threshold for the Input error alarm. The default value is 10s.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.14 |
||||||||
|
hwPhysicalPortOutputErrorStatistics
This object indicates the number of Output errors.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.15 |
||||||||
|
hwPhysicalPortOutputErrorHighThreshold
This object indicates the upper threshold for the number of Output errors. The default value is 1000 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.16 |
||||||||
|
hwPhysicalPortOutputErrorLowThreshold
This object indicates the lower threshold for the number of Output errors. The default value is 100 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.17 |
||||||||
|
hwPhysicalPortOutputErrorInterval
This object indicates the time threshold for the Output error alarm. The default value is 10s.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.18 |
||||||||
|
hwPhysicalPortSdhErrorStatistics
This object indicates the number of SDH errors.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.19 |
||||||||
|
hwPhysicalPortSdhErrorHighThreshold
This object indicates the upper threshold for the number of SDH errors. The default value is 1000 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.20 |
||||||||
|
hwPhysicalPortSdhErrorLowThreshold
This object indicates the lower threshold for the number of SDH errors. The default value is 100 pps.
|
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.21 |
||||||||
|
hwPhysicalPortSdhErrorInterval
This object indicates the time threshold for the SDH error alarm. The default value is 10s.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.22 |
||||||||
|
hwPhysicalPortBIP8SDErrorThreshold
This object indicates the BIP8 SD alarm threshold. The default value is 6.
|
Unsigned32r/w Constraints: range: 0-0range: 6-9 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.23 |
||||||||
|
hwPhysicalPortCrcPerAlarmThresholdCoefficient
This object indicates the coefficient x in the (xE-y) alarm threshold for the CRC error packet ratio on a physical interface.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.24 |
||||||||
|
hwPhysicalPortCrcPerAlarmThresholdPower
This object indicates the power y in the (xE-y) alarm threshold for the CRC error packet ratio on a physical interface.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.25 |
||||||||
|
hwPhysicalPortCrcPerResumeThresholdCoefficient
This object indicates the coefficient x in the (xE-y) clear alarm threshold for the CRC error packet ratio on a physical interface.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.26 |
||||||||
|
hwPhysicalPortCrcPerResumeThresholdPower
This object indicates the power y in the (xE-y) clear alarm threshold for the CRC error packet ratio on a physical interface.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.27 |
||||||||
|
hwPhysicalPortCrcPerTriggerLsp
This object indicates whether the CRC error packet ratio alarm and its clear alarm on a physical interface are associated with LSPs.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.28 |
||||||||
|
hwPhysicalPortCrcPerCurrentValueString
This object indicates that the thresholds for CRC error packet ratio alarms on a physical interface are sent to the NMS in the character string format.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.29 |
||||||||
|
hwPhysicalPortCrcPerAlarmThresholdString
This object indicates that the generation threshold for the CRC error packet ratio alarm on a physical interface is sent to the NMS in the character string format.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.30 |
||||||||
|
hwPhysicalPortCrcPerResumeThresholdString
This object indicates that the clearing threshold for the CRC error packet ratio clear alarm on a physical interface is sent to the NMS in the character string format.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.31 |
||||||||
|
hwPhysicalPortCrcPerTriggerSection
This object indicates whether the CRC error packet ratio alarm and its clear alarm on a physical interface are associated with sections.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.32 |
||||||||
|
hwPhysicalPortAlarmTypeThresholdCoefficient
0: indicates that the upper and lower thresholds triggering error packet alarms are enabled.
1: indicates that the alarm function for CRC error packets is enabled. 2: indicates that the alarm function for CRC bit errors… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.33 |
||||||||
|
hwPhysicalPortCrcSdAlarmThresholdCoefficient
The coefficient value of MAC_FCS_SD alarm threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.34 |
||||||||
|
hwPhysicalPortCrcSdAlarmThresholdPower
The power value of MAC_FCS_SD alarm threshold. The range is 5 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.35 |
||||||||
|
hwPhysicalPortCrcSdResumeThresholdCoefficient
The coefficient value of MAC_FCS_SD resume threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.36 |
||||||||
|
hwPhysicalPortCrcSdResumeThresholdPower
The power value of MAC_FCS_SD resume threshold. The range is 5 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.37 |
||||||||
|
hwPhysicalPortCrcExcAlarmThresholdCoefficient
The coefficient value of MAC_FCS_EXC alarm threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.38 |
||||||||
|
hwPhysicalPortCrcExcAlarmThresholdPower
The power value of MAC_FCS_EXC alarm threshold. The range is 2 to 5.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.39 |
||||||||
|
hwPhysicalPortCrcExcResumeThresholdCoefficient
The coefficient value of MAC_FCS_EXC resume threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.40 |
||||||||
|
hwPhysicalPortCrcExcResumeThresholdPower
The power value of MAC_FCS_EXC resume threshold. The range is 2 to 5.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.41 |
||||||||
|
hwPhysicalPortCrcSdAlarmThresholdString
The alarm threshold of MAC_FCS_SD.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.42 |
||||||||
|
hwPhysicalPortCrcSdResumeThresholdString
The resume threshold of MAC_FCS_SD.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.43 |
||||||||
|
hwPhysicalPortCrcExcAlarmThresholdString
The alarm threshold of MAC_FCS_EXC.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.44 |
||||||||
|
hwPhysicalPortCrcExcResumeThresholdString
The resume threshold of MAC_FCS_EXC.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.45 |
||||||||
|
hwPhysicalPortCrcPerAlarmCoefficientStatistics
The coefficient value of CRC-PER(Packet Error Ratio) alarm statistics.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.46 |
||||||||
|
hwPhysicalPortCrcPerAlarmPowerStatistics
The power value of CRC-PER(Packet Error Ratio) alarm statistics.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.47 |
||||||||
|
hwPhysicalPortCrcSdAlarmTriggerLsp
Enable or disable the SD alarm result in switchover.
The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.48 |
||||||||
|
hwPhysicalPortCrcExcAlarmTriggerLsp
Enable or disable the EXC alarm result in switchover.
The value -1 means do not support switchover;1 means the lsp switchover is enabled; 2 means switchover is disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.49 |
||||||||
|
hwPhysicalPortCrcPerWarningThresholdCoefficient
The coefficient value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.50 |
||||||||
|
hwPhysicalPortCrcPerWarningThresholdPower
The power value of CRC-PER(Packet Error Ratio) warning threshold. The range is 1 to 7.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.51 |
||||||||
|
hwPhysicalPortCrcPerWarningResumeThresholdCoefficient
The coefficient value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 9.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.52 |
||||||||
|
hwPhysicalPortCrcPerWarningResumeThresholdPower
The power value of CRC-PER(Packet Error Ratio) warning resume threshold. The range is 1 to 7.
|
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.53 |
||||||||
|
hwPhysicalPortCrcPerWarningThresholdString
The warning threshold of CRC-PER(Packet Error Ratio).
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.54 |
||||||||
|
hwPhysicalPortCrcPerWarningResumeThresholdString
The warning resume threshold of CRC-PER(Packet Error Ratio).
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.55 |
||||||||
|
hwPhysicalPortPreFecCoefficientStatistics
The coefficient value of PRE-FEC bit-error-ratio statistics.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.56 |
||||||||
|
hwPhysicalPortPreFecPowerStatistics
The power value of PRE-FEC bit-error-ratio statistics.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.57 |
||||||||
|
hwPhysicalPortErrorPerCurrentValueString
The current value of error packets per second(Packet Error Ratio).
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.58 |
||||||||
|
hwPhysicalPortErrorPerAlarmThresholdString
The warning threshold of error packets per second(Packet Error Ratio).
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.14.1.1.59 |
||||||||
|
hwInputBroadcastChangeThreshold
input broadcast rate Threshold.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.60 |
||||||||
|
hwCurrentStatisticalInputBroadcast
current statistics of input broadcast.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.61 |
||||||||
|
hwBaseStatisticalInputBroadcast
base statistics of input broadcast.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.62 |
||||||||
|
hwPhysicalPortInputStatistics
This object indicates the input packets statistics.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.63 |
||||||||
|
hwPhysicalPortCrcErrorRatioInterval
This object indicates the time threshold for the ratio of CRC error alarm.
|
Unsigned32r/w Constraints: range: 10-65535 |
.1.3.6.1.4.1.2011.5.25.157.1.14.1.1.64 |
.1.3.6.1.4.1.2011.5.25.157.1.15.1
·
1 row entry
·
8 columns
This table describes association between interface alarms and the interface status.
Enalbe or disable the port alarm result in physics down.
This table lists the enable status of various port alarm.
This table lists the enable status of various port alarm.
Indexes
hwPhysicalPortDownIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwPhysicalPortDownIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.1 |
||||
|
hwPhysicalPortDownName
This object indicates the name of a physical interface.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.2 |
||||
|
hwPhysicalPortCrcEnabledDown
This object indicates association between the CRC error alarm and the interface status. If a CRC error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.3 |
||||
|
hwPhysicalPortSymbolEnabledDown
This object indicates association between the Symbol error alarm and the interface status. If a Symbol error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.4 |
||||
|
hwPhysicalPortInputEnabledDown
This object indicates association between the Input error alarm and the interface status. If an Input error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.5 |
||||
|
hwPhysicalPortOutputEnabledDown
This object indicates association between the Output error alarm and the interface status. If an Output error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.6 |
||||
|
hwPhysicalPortSdhEnabledDown
This object indicates association between the SDH error alarm and the interface status. If an SDH error alarm is generated, the involved interface goes Down accordingly. The default value is disable(0).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.7 |
||||
|
hwPhysicalPortBip8SdEnabledDown
Enalbe or disable the BIP8-SD error alarm result in physics down, and the default value is disable.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.15.1.1.8 |
.1.3.6.1.4.1.2011.5.25.157.1.16.1
·
1 row entry
·
6 columns
The table includes the information of the port protect group configuration information, and include the port group, working status of port etc.
The table includes the information of the port protect group configuration information.
The index of the table is hwPortProtectGroupId.
The index of the table is hwPortProtectGroupId.
Indexes
hwPortProtectGroupId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPortProtectGroupId
Port protect group index.
|
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.1 |
||||||||||||
|
hwPortProtectMasterIfIndex
The master interface index of port protect group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.2 |
||||||||||||
|
hwPortProtectMasterStatus
Working status of master port , include work, protect, down.
work: the port in group is active. protect: master port is protect port. down: master port is inactive. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.3 |
||||||||||||
|
hwPortProtectSlaveIfIndex
The slave interface index of port protect group.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.4 |
||||||||||||
|
hwPortProtectSlaveStatus
Working status of slave port , include work, protect, down.
work: the port in group is active. protect: slave port is protect port. down: slave port is inactive. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.5 |
||||||||||||
|
hwPortProtectRowStatus
Status of port protect group row.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.16.1.1.6 |
hwPortLineTable
table.1.3.6.1.4.1.2011.5.25.157.1.17.1
·
1 row entry
·
8 columns
Indicates the link attributes of the interface. This table lists the link attributes of the interface.
Indicates the link attributes of the interface.
This table lists the link attributes of the interface.
This table lists the link attributes of the interface.
Indexes
hwPortLineIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwPortLineIfIndex
Interface index(es) of port(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.1 |
|
hwPortLineUpStreampbo
Indicates the upstream power back-off of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.2 |
|
hwPortLineDownStreampbo
Indicates the downstream power back-off of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.3 |
|
hwPortLineUpStreamLoopAtten
Indicates the upstream loopback attenuation of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.4 |
|
hwPortLineDownStreamLoopAtten
Indicates the downstream loopback attenuation of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.5 |
|
hwPortLineUpStreamSnrMargin
Indicates the upstream SNR margin of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.6 |
|
hwPortLineDownStreamSnrMargin
Indicates the downstream SNR margin of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.7 |
|
hwPortLineSpeed
Indicates the negotiated rate of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.17.1.1.8 |
hwPortIfStatTable
table.1.3.6.1.4.1.2011.5.25.157.1.18.1
·
1 row entry
·
2 columns
This table lists the number of packets of the interface.
This table lists the number of packets of the interface.
Indexes
hwPortIfStatIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwPortIfStatIfIndex
Interface index(es) of port(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.18.1.1.1 |
|
hwPortIfStatIfInCrcPkts
Indicates the number of packets which the CRC operates.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.18.1.1.2 |
hwIPIfStatTable
table.1.3.6.1.4.1.2011.5.25.157.1.18.2
·
1 row entry
·
10 columns
This table lists the number of ip packets of the interface.
This table lists the number of ip packets of the interface.
Indexes
hwIpIfStatsIfIndex hwIpIfStatsIPVersion
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwIpIfStatsIPVersion
The version of packets protocol.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.1 |
||||
|
hwIpIfStatsIfIndex
Interface index(es) of port(s) present on the device .
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.2 |
||||
|
hwIpIfInOctetRate
The ip rate of octets received on the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.3 |
||||
|
hwIpIfInPktRate
The ip rate of packets received on the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.4 |
||||
|
hwIpIfOutOctetRate
The ip rate of octets transmitted out of the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.5 |
||||
|
hwIpIfOutPktRate
The ip rate of packets transmitted out of the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.6 |
||||
|
hwIpIfInOctets
The ip octets received on the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.7 |
||||
|
hwIpIfInPkts
The ip packets received on the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.8 |
||||
|
hwIpIfOutOctets
The ip octets transmitted out of the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.9 |
||||
|
hwIpIfOutPkts
The ip packets transmitted out of the interface .
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.18.2.1.10 |
hwPortDescriptionTable
table.1.3.6.1.4.1.2011.5.25.157.1.19.1
·
1 row entry
·
2 columns
This table lists the description of interfaces.
This table lists the description of interfaces.
Indexes
hwPortDescriptionIfIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPortDescriptionIfIndex
Interface index(es) of port(s) present on the device.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.19.1.1.1 |
||||||||||
|
hwPortDescriptionIfPortDescription
Indicates the description of ports.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.19.1.1.2 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1
·
1 row entry
·
10 columns
This table lists the capability and result of PRBS test.
This table lists the capability and result of PRBS test.
Indexes
hwPRBSTestPortStatusIfName hwPRBSTestPortStatusSide
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwPRBSTestPortStatusIfName
Interface name of port(s) present on the device.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.1 |
||||||||||
|
hwPRBSTestPortStatusSide
Indicate PRBS test side.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.2 |
||||||||||
|
hwPRBSTestPortStatusSuportFlag
Whether PRBS test supported.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.3 |
||||||||||
|
hwPRBSTestPortStatusPatternBitmap
Indicate supported PRBS pattern by bitmap.
bit 0 - 3 : PRBS15, PRBS20, PRBS23, QRSS, bit 4 - 7 : 0S, 1S, ALT-0-1, 1IN8, bit 8 - 11 : 3IN24, PRBS6, PRBS9, PRBS11, bit 12 : … |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.4 |
||||||||||
|
hwPRBSTestPortStatusErrInsertLevel
Indicate the supported err-insert level.
It's described by bitmap. From low to high, the different bit position indicates whether or not support 1, 1e-1, 1e-2, 1e-3, etc. e.g. 0x1FC (0b111111100): Range from 1e-2 to 1e-… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.5 |
||||||||||
|
hwPRBSTestPortStatusSlotNum
Slot ID of the testing phyicial port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.6 |
||||||||||
|
hwPRBSTestPortStatusCardNum
Card ID of the testing phyicial port.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.7 |
||||||||||
|
hwPRBSTestPortStatusPhyPortIfName
Interface Name of the testing phyicial port.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.8 |
||||||||||
|
hwPRBSTestPortStatusResultCount
Total count of PRBS test history result.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.9 |
||||||||||
|
hwPRBSTestPortStatusOngoingTestIndex
Indicate the ongoing PRBS testing index of current interface.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.1.1.10 |
hwPRBSTestResultTable
table.1.3.6.1.4.1.2011.5.25.157.1.20.2
·
1 row entry
·
25 columns
This table lists PRBS test result info.
This table lists PRBS test result info.
Indexes
hwPRBSTestResultIfName hwPRBSTestResultTestIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwPRBSTestResultIfName
Interface name of port(s) present on the device.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.1 |
||||
|
hwPRBSTestResultTestIndex
Indicate the PRBS test hisotry test index. 0 is invalid.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.2 |
||||
|
hwPRBSTestResultPhyPortIfName
Interface Name of the testing phyicial port.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.3 |
||||
|
hwPRBSTestResultSide
Indicate PRBS test side.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.4 |
||||
|
hwPRBSTestResultPattern
Indicate PRBS pattern. Refer to hwPRBSTestPortStatusPatternBitmap, but single bit here.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.5 |
||||
|
hwPRBSTestResultIntervalTime
Period time of each interval, in second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.6 |
||||
|
hwPRBSTestResultIntervalCount
PRBS test interval repeat count.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.7 |
||||
|
hwPRBSTestResultTestingIntervalIndex
Indicate the ongoing testing interval index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.8 |
||||
|
hwPRBSTestResultStartTime
Start time of the test.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.9 |
||||
|
hwPRBSTestResultStopTime
Stop time of the test.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.10 |
||||
|
hwPRBSTestResultProgress
Prgress of the test. 100 means 100%.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.11 |
||||
|
hwPRBSTestResultRemainTime
Remaining time of the test, in second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.12 |
||||
|
hwPRBSTestResultErrInserted
Whether error-bit inserted of the test
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.13 |
||||
|
hwPRBSTestResultTotalBit
Total-bit of the test.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.14 |
||||
|
hwPRBSTestResultErrorBit
Error-bit of the test.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.15 |
||||
|
hwPRBSTestResultBerCoe
The coefficient value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.16 |
||||
|
hwPRBSTestResultBerPow
The power value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.17 |
||||
|
hwPRBSTestResultLos
Loss of sync second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.18 |
||||
|
hwPRBSTestResultEs
Error second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.19 |
||||
|
hwPRBSTestResultEfs
Error free second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.20 |
||||
|
hwPRBSTestResultSes
Severely error second, comparing with 1E-3.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.21 |
||||
|
hwPRBSTestResultUas
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.22 |
||||
|
hwPRBSTestResultSegmentTime
Period time of each segment, in second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.23 |
||||
|
hwPRBSTestResultSegmentTotalCount
Segment count of the whole PRBS test.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.24 |
||||
|
hwPRBSTestResultTestingSegmentIndex
Indicate the ongoing testing segment index.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.2.1.25 |
hwPRBSTestIntervalTable
table.1.3.6.1.4.1.2011.5.25.157.1.20.3
·
1 row entry
·
17 columns
This table lists PRBS test interval info.
This table lists PRBS test interval info.
Indexes
hwPRBSTestIntervalIfName hwPRBSTestIntervalTestIndex hwPRBSTestIntervalIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
hwPRBSTestIntervalIfName
Interface name of port(s) present on the device.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.1 |
||||
|
hwPRBSTestIntervalTestIndex
Indicate the PRBS test hisotry test index. 0 is invalid.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.2 |
||||
|
hwPRBSTestIntervalIndex
Indicate the interval index of a test. 0 is invalid.
|
Unsigned32 Constraints: range: 0-60 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.3 |
||||
|
hwPRBSTestIntervalStartTime
Start time of the interval.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.4 |
||||
|
hwPRBSTestIntervalStopTime
Stop time of the interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.5 |
||||
|
hwPRBSTestIntervalProgress
Prgress of the interval. 100 means 100%.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.6 |
||||
|
hwPRBSTestIntervalRemainTime
Remaining time of the interval, in second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.7 |
||||
|
hwPRBSTestIntervalErrInserted
Whether error-bit inserted of the interval
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.8 |
||||
|
hwPRBSTestIntervalTotalBit
Total-bit of the interval.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.9 |
||||
|
hwPRBSTestIntervalErrorBit
Error-bit of the interval.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.10 |
||||
|
hwPRBSTestIntervalBerCoe
The coefficient value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.11 |
||||
|
hwPRBSTestIntervalBerPow
The power value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.12 |
||||
|
hwPRBSTestIntervalLos
Loss of sync second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.13 |
||||
|
hwPRBSTestIntervalEs
Error second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.14 |
||||
|
hwPRBSTestIntervalEfs
Error free second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.15 |
||||
|
hwPRBSTestIntervalSes
Severely error second, comparing with 1E-3.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.16 |
||||
|
hwPRBSTestIntervalUas
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.3.1.17 |
hwPRBSTestSegmentTable
table.1.3.6.1.4.1.2011.5.25.157.1.20.4
·
1 row entry
·
14 columns
This table lists PRBS test segment info.
This table lists PRBS test segment info.
Indexes
hwPRBSTestSegmentIfName hwPRBSTestSegmentTestIndex hwPRBSTestSegmentIndex
| Column | Syntax | OID |
|---|---|---|
|
hwPRBSTestSegmentIfName
Interface name of port(s) present on the device.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.1 |
|
hwPRBSTestSegmentTestIndex
Indicate the PRBS test index. 0 is invalid.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.2 |
|
hwPRBSTestSegmentIndex
Indicate the segment index of a test. 0 is invalid.
|
Unsigned32 Constraints: range: 0-864000 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.3 |
|
hwPRBSTestSegmentStartTime
Start time of the interval.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.4 |
|
hwPRBSTestSegmentEndTime
Stop time of the interval
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.5 |
|
hwPRBSTestSegmentTotalBit
Total-bit of the segment.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.6 |
|
hwPRBSTestSegmentErrorBit
Error-bit of the segment.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.7 |
|
hwPRBSTestSegmentBerCoe
The coefficient value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.8 |
|
hwPRBSTestSegmentBerPow
The power value of bit-error-ratio.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.9 |
|
hwPRBSTestSegmentLos
Loss of sync second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.10 |
|
hwPRBSTestSegmentEs
Error second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.11 |
|
hwPRBSTestSegmentEfs
Error free second.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.12 |
|
hwPRBSTestSegmentSes
Severely error second, comparing with 1E-3.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.13 |
|
hwPRBSTestSegmentUas
Unavaliable seconds. Continuous severely error seconds, start counting with the 11th SES.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.20.4.1.14 |
hwOtnTable
table.1.3.6.1.4.1.2011.5.25.157.1.21.1
·
1 row entry
·
12 columns
This table lists the OTN attributes of WDM interfaces.
This table lists the otn attributes of the WDM interface.
Indexes
hwOtnIfIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwOtnIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.1 |
||||||||||||||||
|
hwOtnFecMode
This object indicates the forward error correction (FEC) mode. By default, the FEC mode is standard.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.2 |
||||||||||||||||
|
hwOtnFec0bitStatistics
This object indicates the number of 0 bits corrected by FEC.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.3 |
||||||||||||||||
|
hwOtnFec1bitStatistics
This object indicates the number of 1 bits corrected by FEC.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.4 |
||||||||||||||||
|
hwOtnFec0And1TypeStatistics
This object indicates the number of 0 bits and the number of 1 bits corrected by FEC.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.5 |
||||||||||||||||
|
hwOtnFecSymbolErrStatistics
This object indicates the number of bytes corrected by FEC.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.6 |
||||||||||||||||
|
hwOtnFecUncorrectErrStatistics
This object indicates the number of blocks that cannot be corrected by FEC.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.7 |
||||||||||||||||
|
hwOtnPreFecBERCoefficient
This object indicates the coefficient for bit error statistics before FEC.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.8 |
||||||||||||||||
|
hwOtnPreFecBERPower
This object indicates the power for bit error statistics before FEC.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.9 |
||||||||||||||||
|
hwOtnAfterFecBERCoefficient
This object indicates the coefficient for bit error statistics after FEC.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.10 |
||||||||||||||||
|
hwOtnAfterFecBERPower
This object indicates the power for bit error statistics after FEC.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.11 |
||||||||||||||||
|
hwOtnOSNR
This object indicates the optical signal-to-noise ratio.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.21.1.1.14 |
hwLogicalPortTable
table.1.3.6.1.4.1.2011.5.25.157.1.22.1
·
1 row entry
·
2 columns
This table lists the working status of the logical ports.
This table lists the working status of the logical ports.
Indexes
hwLogicalPortIfIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hwLogicalPortIfIndex
Interface index(es) of the logical port(s) present on the device .
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.22.1.1.1 |
||||||||
|
hwLogicalPortStatisticEnable
Indicates the statistic enable status of the logical port(s) .
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.22.1.1.2 |
hwEmTable
table.1.3.6.1.4.1.2011.5.25.157.1.23.1
·
1 row entry
·
6 columns
This table lists the attributes of all E&M interfaces.
This table lists the attributes of all E&M interfaces.
Indexes
hwEmIfIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwEmIfIndex
The value of this object identifies the index of an E&M interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.1.1.1 |
||||||||||
|
hwEmPcmMode
This object indicates the PCM mode of an E&M interface.
The value can be A-Law or U-Law. The default value is A-Law. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.1.1.2 |
||||||||||
|
hwEmSignalMode
This object indicates the signaling mode of an E&M interface.
The value can be Bell-1,Bell-2,Bell-3,Bell-4 or Bell-5. The default value is Bell-5. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.1.1.3 |
||||||||||
|
hwEmReceiveGain
This object indicates the receive gain of an E&M interface.
The value ranges from -20 to 1.5 with a step of 0.5, in dB. The default value is 0 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.1.1.4 |
||||||||||
|
hwEmSendGain
This object indicates the transmit gain of an E&M interface.
The value ranges from -7 to 13.5 with a step of 0.5, in dB. The default value is 0 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.1.1.5 |
||||||||||
|
hwEmUserLine
This object indicates the user line mode of an E&M interface.
The value can be 2-wire or 4-wire. The default value is 4-wire. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.1.1.6 |
hwFxsoTable
table.1.3.6.1.4.1.2011.5.25.157.1.23.2
·
1 row entry
·
22 columns
This table lists the attributes of all FXS/FXO interfaces.
This table lists the attributes of all FXS/FXO interfaces.
Indexes
hwFxsoIfIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwFxsoIfIndex
The value of this object identifies the index of an FXS/FXO.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.1 |
||||||||||||||||||||||||||||||||||
|
hwFxsoPortMode
This object indicates the type of an FXS/FXO interface.
For NED1MPAA/CR23MPAA PICs, the last four ports (ports 6, 7, 8, and 9) can work either in fxo or fxs mode. The default mode is fxo. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.2 |
||||||||||||||||||||||||||||||||||
|
hwFxsoPcmMode
This object indicates the PCM mode of an FXS/FXO interface.
The value can be A-Law or U-Law. The default value is A-Law. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.3 |
||||||||||||||||||||||||||||||||||
|
hwFxsCurrent
This object indicates the current of an FXS interface.
The value can be 16mA or 20mA. The default value is 16mA. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.4 |
||||||||||||||||||||||||||||||||||
|
hwFxsImpedance
This object indicates the impedance of an FXS interface.The value can be:
value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 120 n… |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.5 |
||||||||||||||||||||||||||||||||||
|
hwFxsReceiveGain
This object indicates the receive gain of an FXS interface.
The value ranges from -12 to 0 with a step of 0.5, in dB. The default value is -7 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.2.1.6 |
||||||||||||||||||||||||||||||||||
|
hwFxsSendGain
This object indicates the transmit gain of an FXS interface.
The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.2.1.7 |
||||||||||||||||||||||||||||||||||
|
hwFxsLineLock
This object indicates whether line lock is enabled for an FXS interface.
The value can be enable or disable. The default value is enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.8 |
||||||||||||||||||||||||||||||||||
|
hwFxsHotLine
This object indicates whether the hotline function is enabled for an FXS interface.
The value can be enable or disable. The default value is enable. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.9 |
||||||||||||||||||||||||||||||||||
|
hwFxoFeedMaxVoltage
This object indicates the maximum feed voltage allowed by an FXO interface.
The value ranges from -100 to 0. The default value is -20V. |
Integer32r/w Constraints: range: -100-0 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.10 |
||||||||||||||||||||||||||||||||||
|
hwFxoFeedMinVoltage
This object indicates the minimum feed voltage allowed by an FXO interface.
The value ranges from -100 to 0. The default value is -80V. |
Integer32r/w Constraints: range: -100-0 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.11 |
||||||||||||||||||||||||||||||||||
|
hwFxoFeedMaxCurrent
This object indicates the maximum feed current allowed by an FXO interface.
The value can be 25mA,30mA,35mA or 40mA. The default value is 35mA. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.12 |
||||||||||||||||||||||||||||||||||
|
hwFxoFeedMinCurrent
This object indicates the minimum feed current allowed by an FXO interface.
The value can be 16mA,17mA,18mA,19mA or 20mA. The default value is 16mA. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.13 |
||||||||||||||||||||||||||||||||||
|
hwFxoReceiveGain
This object indicates the receive gain of an FXO interface.
The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.2.1.14 |
||||||||||||||||||||||||||||||||||
|
hwFxoSendGain
This object indicates the transmit gain of an FXO interface.
The value ranges from -6 to 5 with a step of 0.5, in dB. The default value is 0 dB. |
OctetStringr/w | .1.3.6.1.4.1.2011.5.25.157.1.23.2.1.15 |
||||||||||||||||||||||||||||||||||
|
hwFxoDcImpedance
This object indicates the DC impedance of an FXO interface.
The value can be 50 ohm or 800 ohm. The default value is 50 ohm. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.16 |
||||||||||||||||||||||||||||||||||
|
hwFxoAcImpedance
This object indicates the AC impedance of an FXO interface.The value can be:
value 0: 600 ohm value 1: 900 ohm value 2: 270 ohm + (750 ohm || 150 nF) and 275 ohm + (780 ohm || 150 nF) value 3: 220 ohm + (820 ohm || 12… |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.17 |
||||||||||||||||||||||||||||||||||
|
hwFxoRingMinDuration
This object indicates the minimum duration that an FXO interface takes to confirm a ringing current.
The value can be 100ms,150ms,200ms,256ms,384ms,512ms,640ms or 1024ms. The default value is 200ms. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.18 |
||||||||||||||||||||||||||||||||||
|
hwFxoRingMaxInterval
This object indicates a ringing current timeout period on a FXO interface.
The default value is notuse. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.19 |
||||||||||||||||||||||||||||||||||
|
hwFxoRingFrequence
This object indicates a ringing current's frequency detected by an FXO interface.
The value can be 16hz,25hz or 50hz. The default value is 25hz. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.20 |
||||||||||||||||||||||||||||||||||
|
hwFxoRingAcAmplitude
This object indicates a ringing current's AC amplitude detected by an FXO interface.
The value can be 74V,65V or 50V. The default value is 50V. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.21 |
||||||||||||||||||||||||||||||||||
|
hwFxoRingOffset
This object indicates a ringing current's AC offset detected by an FXO interface.
The value ranges from 0 to 100. The default value is 70mA. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.2011.5.25.157.1.23.2.1.22 |
hwRsTable
table.1.3.6.1.4.1.2011.5.25.157.1.23.3
·
1 row entry
·
13 columns
This table lists the attributes of all RS interfaces.
This table lists the attributes of all RS interfaces.
Indexes
hwRsIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwRsIfIndex
The value of this object identifies the index of a serial interface on a device.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1 |
||||||||||||
|
hwRsPortMode
This object indicates the type of a serial interface.
The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For NED1MPAA/CR23MPAA PICs: Ports 0 and 2 work in rs-232 mode. The working mode cannot be configured. Por… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2 |
||||||||||||
|
hwRsWorkMode
This object indicates the mode in which a serial interface works.
The value can be dce or dte. The default value is dce. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3 |
||||||||||||
|
hwRsPhysicalMode
This object indicates the mode in which a serial interface transmits signals.
The value can be async or sync. The default value is async. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4 |
||||||||||||
|
hwRsClockSource
This object indicates the clock source mode of a serial interface.
The value can be internal,external or slave. The default value is internal. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5 |
||||||||||||
|
hwRsBaudrate
This object indicates the baud rate of a serial interface.
The value can be : 0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, 4: 9600bit/s, 5: 19200bit/s, 6: … |
Integer32r/w Constraints: range: 0-38 |
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6 |
||||||||||||
|
hwRsClockSendMode
This object indicates the mode in which clock signals transmitted by a serial interface are sampled.
This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7 |
||||||||||||
|
hwRsClockReceiveMode
This object indicates the mode in which clock signals received by a serial interface are sampled.
This mode can be configured in synchronous clock mode. The value can be inphase or inversephase. The default value is in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8 |
||||||||||||
|
hwRsParity
This object indicates the parity check mode of a serial interface's asynchronous frames.
This mode can be configured in asynchronous clock mode. The value can be none,even or odd. The default value is none. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9 |
||||||||||||
|
hwRsStopbits
This object indicates the number of stop bits contained in a serial interface's asynchronous frame.
This object can be configured in asynchronous clock mode. The value can be 1-bits or 2-bits. The default value is 1-bi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10 |
||||||||||||
|
hwRsDatabits
This object indicates the number of data bits contained in a serial interface's asynchronous frame.
This object can be configured in asynchronous clock mode. The value ranges from 5 to 8 bits.The default value is 8 bits… |
Integer32r/w Constraints: range: 5-8range: 255-255 |
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11 |
||||||||||||
|
hwRsMuxProtocol
This object indicates the type of a serial interface's sub-rate multiplexing protocol.
This object can be configured in asynchronous clock mode. The value can be sbit-loop,sbit=0 or sbit=1. The default value is sbit-lo… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12 |
||||||||||||
|
hwRsX50PhaseMode
This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate.
The value can be sequence or interval. The default value is sequence. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13 |
hwGlobalCfgTable
table.1.3.6.1.4.1.2011.5.25.157.1.23.4
·
1 row entry
·
3 columns
This table lists the global physical attributes of all narrowband interfaces.
This table lists the global physical attributes of all narrowband interfaces.
Indexes
hwNarrowBandCardId
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwNarrowBandCardId
The value of this object identifies the ID of a narrowband card on a device.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.4.1.1 |
||||||||||
|
hwSignalMode
Indicates the global signal mode of the physical serial interface.
By default, the signal mode is bell5. This object indicates the global signaling mode of an E&M interface. The value can be Bell-1,Bell-2,Bell-3,Bell-4 … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.4.1.2 |
||||||||||
|
hwUserLine
This object indicates the global user line mode of an E&M interface.
The value can be 2-wire or 4-wire. The default value is 4-wire. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.4.1.3 |
hwNbCommonTable
table.1.3.6.1.4.1.2011.5.25.157.1.23.5
·
1 row entry
·
7 columns
This table lists the common attributes of all narrowband interfaces.
This table lists the common attributes of all narrowband interfaces.
Indexes
hwNbIfIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hwNbIfIndex
The value of this object identifies the index of an narrowband interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.1 |
||||||||||||||||||||||
|
hwNbLoopback
The local loopback of an narrowband interface is used to test the interface itself.
By default, stopLoopback is used. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.2 |
||||||||||||||||||||||
|
hwNbPortType
This object indicates the type of a serial interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.3 |
||||||||||||||||||||||
|
hwNbAcBlock
This object indicates the AC state of a serial interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.4 |
||||||||||||||||||||||
|
hwNbTimeDelayMaster
This object indicates the delay configured for the primary link of a serial interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.5 |
||||||||||||||||||||||
|
hwNbTimeDelaySlave
This object indicates the delay configured for the secondary link of a serial interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.6 |
||||||||||||||||||||||
|
hwNbRealTimeDelay
This object indicates the real-time delay of a serial interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.23.5.1.7 |
.1.3.6.1.4.1.2011.5.25.157.1.24.1
·
1 row entry
·
4 columns
Link-heartbeat alarm fault info table. The table that contains send packets interface and receive packets interface information currently operating on this device.
Link-heartbeat alarm fault info entry.
Indexes
hwLinkHeartbeatIfindex
| Column | Syntax | OID |
|---|---|---|
|
hwLinkHeartbeatIfindex
The interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.24.1.1.1 |
|
hwLinkHeartbeatIfName
The interface name.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.24.1.1.2 |
|
hwLinkHeartbeatTxInterface
The send physical interface name.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.24.1.1.3 |
|
hwLinkHeartbeatRxInterface
The receive physical interface name.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.24.1.1.4 |
hwPortTotalStatTable
table.1.3.6.1.4.1.2011.5.25.157.1.25.1
·
1 row entry
·
8 columns
This table lists the port total statistics.
Indicates the port total statistics.
Indexes
hwPortTotalStatIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwPortTotalStatIfIndex
The index of this interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.1 |
|
hwPortTotalStatIfName
The name of this interface.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.2 |
|
hwPortTotalStatInPkts
Received total Pkts stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.3 |
|
hwPortTotalStatInOctets
Received total Octets stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.4 |
|
hwPortTotalStatInErrors
Received total error Pkts stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.5 |
|
hwPortTotalStatOutPkts
Send total Pkts stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.6 |
|
hwPortTotalStatOutOctets
Send total Octets stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.7 |
|
hwPortTotalStatOutErrors
Send total error Pkts stat of this interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.25.1.1.8 |
hwIFMPortBurstTable
table.1.3.6.1.4.1.2011.5.25.157.1.31.1
·
1 row entry
·
8 columns
This table describes the access and configuration of attributes of the port burst alarm
Indicates the attribute of the port burst alarm.
Indexes
hwIFMPortBurstIfIndex
| Column | Syntax | OID |
|---|---|---|
|
hwIFMPortBurstIfIndex
This object indicates the interface index.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.1 |
|
hwIFMPortBurstIfName
This object indicates the burst interface name.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.31.1.1.11 |
|
hwIFMPortBurstInputPacketNum
This object indicates the burst input packet number.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.12 |
|
hwIFMPortBurstInputByteNum
This object indicates the burst input byte number.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.13 |
|
hwIFMPortBurstOutputPacketNum
This object indicates the burst output packet number.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.14 |
|
hwIFMPortBurstOutputByteNum
This object indicates the burst output byte number.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.15 |
|
hwIFMPortBurstThreshold
This object indecates the burst threshold.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.5.25.157.1.31.1.1.16 |
|
hwIFMPortBurstEventTime
Ths object indecates the burst event time.
|
OctetString | .1.3.6.1.4.1.2011.5.25.157.1.31.1.1.17 |