HUAWEI-IMA-MIB
The MIB is mainly used to configure Inverse Multiplexing
for ATM (IMA) interfaces.
hwImaMIB
1.3.6.1.4.1.2011.5.25.176
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
Type Definitions (5)
| ImaFrameLength | Enumeration |
m32(1)m64(2)m128(3)m256(4) |
| ImaGroupState | Enumeration |
notConfigured(1)startUp(2)startUpAck(3)configAbortUnsupportedM(4)configAbortIncompatibleSymmetry(5)configAbortOther(6)insufficientLinks(7)blocked(8)operational(9)configAbortUnsupportedImaVersion(10) |
| ImaGroupSymmetry | Enumeration |
symmetricOperation(1)asymmetricOperation(2)asymmetricConfiguration(3) |
| ImaLinkState | Enumeration |
notInGroup(1)unusableNoGivenReason(2)unusableFault(3)unusableMisconnected(4)unusableInhibited(5)unusableFailed(6)usable(7)active(8) |
| MilliSeconds | Integer32 |
Objects (54)
|
|
.1.3.6.1.4.1.2011.5.25.176 |
|
|
|
.1.3.6.1.4.1.2011.5.25.176.1 |
|
|
|
.1.3.6.1.4.1.2011.5.25.176.1.1 |
|
|
|
hwImaGroupIfIndex | .1.3.6.1.4.1.2011.5.25.176.1.1.1 |
|
|
IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.176.1.1.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.10 |
|
|
ImaFrameLength | .1.3.6.1.4.1.2011.5.25.176.1.1.1.11 |
|
|
ImaFrameLength | .1.3.6.1.4.1.2011.5.25.176.1.1.1.12 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.13 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.14 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.15 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.16 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.17 |
|
|
SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.18 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.19 |
|
|
ImaGroupState | .1.3.6.1.4.1.2011.5.25.176.1.1.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.20 |
|
|
IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.176.1.1.1.21 |
|
|
OctetString | .1.3.6.1.4.1.2011.5.25.176.1.1.1.22 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.23 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.24 |
|
|
ImaGroupState | .1.3.6.1.4.1.2011.5.25.176.1.1.1.3 |
|
|
ImaGroupSymmetry | .1.3.6.1.4.1.2011.5.25.176.1.1.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.5 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.6 |
|
|
IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.176.1.1.1.7 |
|
|
IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.176.1.1.1.8 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.1.1.9 |
|
|
.1.3.6.1.4.1.2011.5.25.176.1.2 |
|
|
|
hwImaLinkIfIndex | .1.3.6.1.4.1.2011.5.25.176.1.2.1 |
|
|
IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.176.1.2.1.1 |
|
|
IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.176.1.2.1.2 |
|
|
ImaLinkState | .1.3.6.1.4.1.2011.5.25.176.1.2.1.3 |
|
|
ImaLinkState | .1.3.6.1.4.1.2011.5.25.176.1.2.1.4 |
|
|
ImaLinkState | .1.3.6.1.4.1.2011.5.25.176.1.2.1.5 |
|
|
SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.176.1.2.1.51 |
|
|
OctetString | .1.3.6.1.4.1.2011.5.25.176.1.2.1.52 |
|
|
ImaLinkState | .1.3.6.1.4.1.2011.5.25.176.1.2.1.6 |
|
|
.1.3.6.1.4.1.2011.5.25.176.1.3 |
|
|
|
hwImaAlarmIfIndex | .1.3.6.1.4.1.2011.5.25.176.1.3.1 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.1 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.10 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.2 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.3 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.4 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.5 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.6 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.7 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.8 |
|
|
Integer32 | .1.3.6.1.4.1.2011.5.25.176.1.3.1.9 |
|
|
.1.3.6.1.4.1.2011.5.25.176.2 |
|
|
|
.1.3.6.1.4.1.2011.5.25.176.2.1 |
|
|
|
.1.3.6.1.4.1.2011.5.25.176.2.2 |
|
|
|
.1.3.6.1.4.1.2011.5.25.176.3 |
Notifications / Traps (16)
| Name | OID | Description |
|---|---|---|
|
|
.1.3.6.1.4.1.2011.5.25.176.3.1 |
This object indicates the near-end IMA group failure. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.10 |
This object indicates that the alarm generated when the differentiated delay on the IMA link exceeded the upper threshold is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.11 |
This object indicates that an alarm is generated when the far-end IMA link fails. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.12 |
This object indicates that the alarm generated for the far-end IMA link failure is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.13 |
This object indicates that an alarm is generated when the IMA transmit link at the far end goes abnormal. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.14 |
This object indicates that the alarm generated for the abnormal IMA transmit link at the far end is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.15 |
This object indicates that an alarm is generated when the IMA receive link at the far end goes abnormal. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.16 |
This object indicates that the alarm generated for the abnormal IMA receive link at the far end is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.2 |
This object indicates that the alarm for the near-end IMA group failure is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.3 |
This object indicates the far-end IMA group failure. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.4 |
This object indicates that the alarm for the far-end IMA group failure is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.5 |
This object indicates that an alarm is generated when the transmit clock modes at the two ends of the IMA group do not match. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.6 |
This object indicates that the alarm generated when the transmit clock modes at the two ends of the IMA group did not match is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.7 |
This object indicates that an alarm is generated when out of frame (OOF) occurs on an IMA link. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.8 |
This object indicates that the alarm generated for OOF on the IMA link is cleared. |
|
|
.1.3.6.1.4.1.2011.5.25.176.3.9 |
This object indicates that an alarm is generated when the differentiated delay on an IMA link exceeds the upper threshold. |