hwEthernetComboType
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38
Object
column
r/w
Enumeration
combo mode of this port.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEthernetEntry
- Table
- hwEthernetTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | auto |
2 | copper |
3 | fiber |
4 | other |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEthernetIfIndex This object indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 |
| hwEthernetLoopback This object indicates the internal loop (local loopback) function, which is used to test a local interface. When the interface works normally, the local loopback function must be … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 |
| hwEthernetPortType This object indicates the type of an Ethernet interface, either the optical interface or the electrical interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 |
| hwEthernetSpeedSet This object indicates the transmission rate of the Ethernet interface. You can configure transmission rates for only certain Ethernet electrical interfaces, and you cannot configu… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 |
| hwEthernetDuplex This object indicates the duplex mode of an Ethernet interface. Ethernet electrical interfaces can work in either half-duplex or full-duplex mode. Ethernet optical interfaces can … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 |
| hwEthernetNegotiation This object indicates whether auto-negotiation is enabled on an Ethernet electrical interface.
The default value is enable. For an Ethernet electrical interface, hwEthernetSpeedS… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 |
| hwEthernetPortTypeOperate This object indicates the link type of an Ethernet interface, either optical fibers or cables. This object is only supported by certain Ethernet interfaces. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 |
| hwEthernetClock This object indicates the clock mode. By default, the slave clock mode is used. Only WAN interfaces require the clock configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 |
| hwEthernetFlagJ0Mode This object indicates that 10GE WAN interfaces have to use SDH/SONET as the frame format and the overhead byte has to be set. The overhead byte of an SDH frame can be: j0: indicat… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 |
| hwEthernetFlagJ0Value This object indicates that when hwEthernetFlagJ0Mode is set to j01ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 |
| hwEthernetFlagJ0Trace This object indicates the section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect.
When hwEthernetFlagJ0Mode is set to… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23 |
| hwEthernetFlagJ1Mode This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. By default, the value is j116ByteMode(2): hwEthernetFlagJ1Trace: NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 |
| hwEthernetFlagJ1Value This object indicates that when hwEthernetFlagJ1Mode is set to j11ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 |
| hwEthernetFlagJ1Trace This object indicates the path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwEthernetFlagJ1Mode is set to j1… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 |
| hwEthernetFlagC2Value This object indicates the overhead byte of the SDH frame.
C2: indicates the path signal label byte. The value ranges from 00 to FF, in the hexadecimal format. The default value is… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 |
| hwEthernetUpHoldTime This object indicates the time period during which the interface remains Up. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 |
| hwEthernetDownHoldTime This object indicates the time period during which the interface remains Down. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 |
| hwEthernetSubinterfaceStatisticEnable This object indicates statistics collection is enabled for a sub-interface. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 |
| hwEthernetFlowControl This object indicates the interface flow control status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 |
| hwEthernetOffline This object indicates that the physical protocol status of an interface is Down. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 |
| hwEthernetSetTransferMode This object indicates the LAN-WAN mode of an Ethernet interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 |
| hwEthernetJumboframeMaxLength This object indicates the maximum length of the Jumbo frame on an interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 |
| hwEthernetPortMode Indicates combo mode of this port. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 |
| hwEthernetNegotiationMode Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 |
| hwEthernetCarrierTransitions Number of times the interface state has transitioned from up to down since the time the device restarted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.41 |