hwEthernetFlagJ0Trace
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23
Object
column
r/w
OctetString
This object indicates the section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect. When hwEthernetFlagJ0Mode is set to j016ByteMode, the value of hwEthernetFlagJ0Trace is up to 15 characters; when hwEthernetFlagJ0Mode is set to j064ByteOrNullMode, the value of hwEthernetFlagJ0Trace is up to 64 characters.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwEthernetEntry
- Table
- hwEthernetTable
- Siblings
- 25
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEthernetIfIndex This object indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1 |
| hwEthernetLoopback This object indicates the internal loop (local loopback) function, which is used to test a local interface. When the interface works normally, the local loopback function must be … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11 |
| hwEthernetPortType This object indicates the type of an Ethernet interface, either the optical interface or the electrical interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12 |
| hwEthernetSpeedSet This object indicates the transmission rate of the Ethernet interface. You can configure transmission rates for only certain Ethernet electrical interfaces, and you cannot configu… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13 |
| hwEthernetDuplex This object indicates the duplex mode of an Ethernet interface. Ethernet electrical interfaces can work in either half-duplex or full-duplex mode. Ethernet optical interfaces can … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14 |
| hwEthernetNegotiation This object indicates whether auto-negotiation is enabled on an Ethernet electrical interface.
The default value is enable. For an Ethernet electrical interface, hwEthernetSpeedS… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15 |
| hwEthernetPortTypeOperate This object indicates the link type of an Ethernet interface, either optical fibers or cables. This object is only supported by certain Ethernet interfaces. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16 |
| hwEthernetClock This object indicates the clock mode. By default, the slave clock mode is used. Only WAN interfaces require the clock configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20 |
| hwEthernetFlagJ0Mode This object indicates that 10GE WAN interfaces have to use SDH/SONET as the frame format and the overhead byte has to be set. The overhead byte of an SDH frame can be: j0: indicat… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21 |
| hwEthernetFlagJ0Value This object indicates that when hwEthernetFlagJ0Mode is set to j01ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22 |
| hwEthernetFlagJ1Mode This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. By default, the value is j116ByteMode(2): hwEthernetFlagJ1Trace: NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24 |
| hwEthernetFlagJ1Value This object indicates that when hwEthernetFlagJ1Mode is set to j11ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25 |
| hwEthernetFlagJ1Trace This object indicates the path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwEthernetFlagJ1Mode is set to j1… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26 |
| hwEthernetFlagC2Value This object indicates the overhead byte of the SDH frame.
C2: indicates the path signal label byte. The value ranges from 00 to FF, in the hexadecimal format. The default value is… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27 |
| hwEthernetUpHoldTime This object indicates the time period during which the interface remains Up. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31 |
| hwEthernetDownHoldTime This object indicates the time period during which the interface remains Down. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32 |
| hwEthernetSubinterfaceStatisticEnable This object indicates statistics collection is enabled for a sub-interface. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33 |
| hwEthernetFlowControl This object indicates the interface flow control status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34 |
| hwEthernetOffline This object indicates that the physical protocol status of an interface is Down. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35 |
| hwEthernetSetTransferMode This object indicates the LAN-WAN mode of an Ethernet interface. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36 |
| hwEthernetJumboframeMaxLength This object indicates the maximum length of the Jumbo frame on an interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37 |
| hwEthernetComboType combo mode of this port. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38 |
| hwEthernetPortMode Indicates combo mode of this port. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39 |
| hwEthernetNegotiationMode Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40 |
| hwEthernetCarrierTransitions Number of times the interface state has transitioned from up to down since the time the device restarted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.41 |