hwPosFlagJ0Trace
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23
Object
column
r/w
OctetString
This object indicates the section trace byte. When hwPosFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect. When hwPosFlagJ0Mode is set to j016ByteMode, the value of hwPosFlagJ0Mode is up to 15 characters; when hwPosFlagJ0Mode is set to j064ByteOrNullMode, the value of hwPosFlagJ0Mode is up to 64 characters.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.2.1.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPosEntry
- Table
- hwPosTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPosIfIndex Interface index(es) of port(s) present on the device . | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.1 |
| hwPosLinkProtocol This object indicates the link layer protocol running on a POS interface. By default, a POS interface uses PPP as the link layer protocol. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.11 |
| hwPosFrameFormat This object indicates the frame type on a POS interface. By default, the frame type is SDH. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.12 |
| hwPosLoopback This object indicates the internal loop (local loopback) function on a POS interface, which is used to test a local interface.
When the interface works normally, the local loopba… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.13 |
| hwPosScramble This object indicates whether the payload scramble function is enabled on a POS interface. By default, the scramble function is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.14 |
| hwPosClock This object indicates the clock mode. By default, the slave clock mode is used. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.15 |
| hwPosCrcVerifyCode This object indicates the length of the CRC field. By default, the length is 32. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.16 |
| hwPosFlagJ0Mode This object indicates the overhead byte of an SDH frame. The value can be:
j0: indicates the section trace byte. The default value is j016ByteMode(2).
hwEthernetFlagJ0Trace: NetEn… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.21 |
| hwPosFlagJ0Value This object indicates that when hwPosFlagJ0Mode is set to j01ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.22 |
| hwPosFlagJ1Mode This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. The default value is j116ByteMode(2). hwPosFlagJ1Trace: NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.24 |
| hwPosFlagJ1Value This object indicates the j1-1byte-mode value. When hwPosFlagJ1Mode is set to j11ByteMode, this object takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.25 |
| hwPosFlagJ1Trace This object indicates the path trace byte. When hwPosFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect.
When hwPosFlagJ1Mode is set to j116ByteMod… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.26 |
| hwPosFlagC2Value This object indicates the overhead byte of an SDH frame. C2 indicates the path signal label byte. The value ranges from 00 to FF in the hexadecimal format. The default value is 22… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.2.1.1.27 |