hwRsPortMode
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2
Object
column
r/w
Enumeration
This object indicates the type of a serial interface. The value can be rs-232,rs-485,rs-422,,v.24,x.21 or v.35. For NED1MPAA/CR23MPAA PICs: Ports 0 and 2 work in rs-232 mode. The working mode cannot be configured. Ports 1 and 3 can work either in rs-485 or rs-422 mode. The default mode is rs-422. For NED1SA8/CR23SA8 PICs, all ports can work in v-35, x-21, or v-24 mode. The default mode is v-24.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.23.3.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRsEntry
- Table
- hwRsTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rs232 |
2 | rs485 |
3 | rs422 |
4 | v24 |
5 | x21 |
6 | v35 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRsIfIndex The value of this object identifies the index of a serial interface on a device. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.1 |
| hwRsStopbits This object indicates the number of stop bits contained in a serial interface's asynchronous frame.
This object can be configured in asynchronous clock mode.
The value can be 1-b… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.10 |
| hwRsDatabits This object indicates the number of data bits contained in a serial interface's asynchronous frame.
This object can be configured in asynchronous clock mode.
The value ranges from… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.11 |
| hwRsMuxProtocol This object indicates the type of a serial interface's sub-rate multiplexing protocol.
This object can be configured in asynchronous clock mode.
The value can be sbit-loop,sbit=0… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.12 |
| hwRsX50PhaseMode This object indicates the envelope phase mode multiplexed by a serial interface's x.50 sub-rate.
The value can be sequence or interval. The default value is sequence. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.13 |
| hwRsWorkMode This object indicates the mode in which a serial interface works.
The value can be dce or dte. The default value is dce. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.3 |
| hwRsPhysicalMode This object indicates the mode in which a serial interface transmits signals.
The value can be async or sync. The default value is async. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.4 |
| hwRsClockSource This object indicates the clock source mode of a serial interface.
The value can be internal,external or slave. The default value is internal. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.5 |
| hwRsBaudrate This object indicates the baud rate of a serial interface.
The value can be :
0: 600bit/s, 1: 1200bit/s, 2: 2400bit/s, 3: 4800bit/s, … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.6 |
| hwRsClockSendMode This object indicates the mode in which clock signals transmitted by a serial interface are sampled.
This mode can be configured in synchronous clock mode.
The value can be inpha… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.7 |
| hwRsClockReceiveMode This object indicates the mode in which clock signals received by a serial interface are sampled.
This mode can be configured in synchronous clock mode.
The value can be inphase … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.8 |
| hwRsParity This object indicates the parity check mode of a serial interface's asynchronous frames.
This mode can be configured in asynchronous clock mode.
The value can be none,even or odd… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.23.3.1.9 |