hwOutputDiscardEnable

HUAWEI-PORT-MIB · .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.45
MIB view Table view

Object

column r/w P-BRIDGE-MIBEnabledStatus 
Indicates whether  output discard traps should be
generated for this physical port. 
		 By default, the value is disabled.

Context

MIB
HUAWEI-PORT-MIB
OID
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.45
Type
column
Access
readwrite
Status
current
Parent
hwPhysicalPortEntry
Table
hwPhysicalPortTable
Siblings
49

Syntax

P-BRIDGE-MIBEnabledStatus
Source
P-BRIDGE-MIBEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwPhysicalPortIfIndex
This object indicates the interface index.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1
hwPhysicalAutoShutLaserOpenInterval
This object indicates the enabling interval for the automatic disabling of LASER. The default value is 2000 ms. The value 2147483647 indicates that the interface does not support …
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10
hwPhysicalAutoShutLaserCloseInterval
This object indicates the disabling interval for the automatic disabling of LASER. The default value is 60000 ms. The value 2147483647 indicates that the interface does not suppor…
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11
hwPhysicalAutoShutLaserLongOpenInterval
This object indicates the long enabling interval for the automatic disabling of LASER. The default value is 90000 ms. The value 2147483647 indicates that the interface does not su…
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12
hwPhysicalLoopbackType
This object indicates the current interface status.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13
hwPhysicalShutLaser
This object indicates whether the LASER function is enabled or not.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14
hwPhysicalLaserStatus
This object indicates the LASER status.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15
hwPhysicalPortHoldUp
This object indicates whether the interface is Up.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16
hwPhysicalPortAlarmInverseEnable
Config port alarm inverse enable.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17
hwPhysicalPortInVsId
VsId.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18
hwPhysicalPortAlarmName
Indicates the physical port alarm name.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19
hwPhysicalPortDelayTime
This object indicates the interface delay. The default value is 0 ms.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2
hwInputRateChangeThresholdPercent
Indicates the threshold for the input rate change, in percentage.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20
hwOutputRateChangeThresholdPercent
Indicates the threshold for the output rate change, in percentage.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21
hwCurrentStatisticalPeriodRate
Indicates the rate in the current statistical period.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22
hwLastStatisticalPeriodRate
Indicates the rate in the last statistical period.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23
hwPortPhysicalRate
Indicates the current physical rate.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24
hwLicenseType
Indicates the type of interface function-controlled license.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25
hwMaxPortNum
Indicates the Maximum number of available interfaces
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26
hwUsedPortNum
Indicates the Number of interfaces in use.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27
hwPhysicalPortMode
The current state of portMode in port.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28
hwScadaGroupId
Indicates the scada group ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29
hwPhysicalPortDelayRemainTime
This object indicates the remaining time after the interface delay is enabled. The value is in milliseconds.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3
hwPhysicalPortGroupID
Indicates the physical port group ID.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30
hwPortTransModeReasonDescr
Indicates the physical port transmission mode different reason.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31
hwAcBlockReason
Indicates the AC block reason.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32
hwPhysicalPortLocalPhyNum
Indicates the local physical port phy number.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.33
hwPhysicalPortRemotePhyNum
Indicates the remote physical port phy number.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.34
hwPhysicalPortLocalGroupID
Indicates the local physical port groupID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.35
hwPhysicalPortRemteGroupID
Indicates the remote physical port groupID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.36
hwPhysicalPortBW
Indicates the local port bandwidth
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.37
hwPhysicalPortList
Indicates the physical port list
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38
hwPhysicalPortPortType
Indicates the physical port type
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.39
hwPhysicalPortName
Indicates the physical port name.
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4
hwPhysicalPortAlarmReason
Indicates the physical port alarm reason
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.40
hwInputDiscardEnable
Indicates whether input discard traps should be generated for this physical port. By default, the value is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.41
hwInputDiscardThreshold
Indicates the physical port input discard threshold, the default is 3000 packets
columnUnsigned32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.42
hwInputDiscardInterval
Indicates the physical port input discard interval, it must be a multiple of 10, the default is 300 seconds
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.43
hwInputDiscardStatistics
Indicates the physical port input discard statistics
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.44
hwOutputDiscardThreshold
Indicates the physical port output discard threshold, the default is 3000 packets
columnUnsigned32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.46
hwOutputDiscardInterval
Indicates the physical port output discard interval, it must be a multiple of 10, the default is 300 seconds
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.47
hwOutputDiscardStatistics
Indicates the physical port output discard statistics
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.48
hwBandwidthLast
Indicates the physical port last bandwidth.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.49
hwPhysicalPortInChassis
Indicates the physical port in chassis.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5
hwBandwidthCurrent
Indicates the physical port current bandwidth.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.50
hwPhysicalPortInSlot
Indicates the SlotID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6
hwPhysicalPortInCard
Indicates the CardID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7
hwPhysicalPortInPort
Indicates the PortID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8
hwPhysicalAutoShutLaserEnable
This object indicates the automatic disabling of LASER. By default, automatic disabling of LASER is not supported.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9