hwPhysicalPortAlarmInverseEnable
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17
Object
column
r/w
Enumeration
Config port alarm inverse enable.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPhysicalPortEntry
- Table
- hwPhysicalPortTable
- Siblings
- 49
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPhysicalPortIfIndex This object indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 |
| hwPhysicalAutoShutLaserOpenInterval This object indicates the enabling interval for the automatic disabling of LASER. The default value is 2000 ms. The value 2147483647 indicates that the interface does not support … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 |
| hwPhysicalAutoShutLaserCloseInterval This object indicates the disabling interval for the automatic disabling of LASER. The default value is 60000 ms. The value 2147483647 indicates that the interface does not suppor… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 |
| hwPhysicalAutoShutLaserLongOpenInterval This object indicates the long enabling interval for the automatic disabling of LASER. The default value is 90000 ms. The value 2147483647 indicates that the interface does not su… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 |
| hwPhysicalLoopbackType This object indicates the current interface status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 |
| hwPhysicalShutLaser This object indicates whether the LASER function is enabled or not. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 |
| hwPhysicalLaserStatus This object indicates the LASER status. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 |
| hwPhysicalPortHoldUp This object indicates whether the interface is Up. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 |
| hwPhysicalPortInVsId VsId. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.18 |
| hwPhysicalPortAlarmName Indicates the physical port alarm name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.19 |
| hwPhysicalPortDelayTime This object indicates the interface delay. The default value is 0 ms. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 |
| hwInputRateChangeThresholdPercent Indicates the threshold for the input rate change, in percentage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.20 |
| hwOutputRateChangeThresholdPercent Indicates the threshold for the output rate change, in percentage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.21 |
| hwCurrentStatisticalPeriodRate Indicates the rate in the current statistical period. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.22 |
| hwLastStatisticalPeriodRate Indicates the rate in the last statistical period. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.23 |
| hwPortPhysicalRate Indicates the current physical rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.24 |
| hwLicenseType Indicates the type of interface function-controlled license. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.25 |
| hwMaxPortNum Indicates the Maximum number of available interfaces | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.26 |
| hwUsedPortNum Indicates the Number of interfaces in use. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.27 |
| hwPhysicalPortMode The current state of portMode in port. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.28 |
| hwScadaGroupId Indicates the scada group ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.29 |
| hwPhysicalPortDelayRemainTime This object indicates the remaining time after the interface delay is enabled. The value is in milliseconds. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 |
| hwPhysicalPortGroupID Indicates the physical port group ID. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.30 |
| hwPortTransModeReasonDescr Indicates the physical port transmission mode different reason. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.31 |
| hwAcBlockReason Indicates the AC block reason. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.32 |
| hwPhysicalPortLocalPhyNum Indicates the local physical port phy number. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.33 |
| hwPhysicalPortRemotePhyNum Indicates the remote physical port phy number. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.34 |
| hwPhysicalPortLocalGroupID Indicates the local physical port groupID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.35 |
| hwPhysicalPortRemteGroupID Indicates the remote physical port groupID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.36 |
| hwPhysicalPortBW Indicates the local port bandwidth | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.37 |
| hwPhysicalPortList Indicates the physical port list | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38 |
| hwPhysicalPortPortType Indicates the physical port type | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.39 |
| hwPhysicalPortName Indicates the physical port name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 |
| hwPhysicalPortAlarmReason Indicates the physical port alarm reason | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.40 |
| hwInputDiscardEnable Indicates whether input discard traps should be
generated for this physical port.
By default, the value is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.41 |
| hwInputDiscardThreshold Indicates the physical port input discard threshold, the default is 3000 packets | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.42 |
| hwInputDiscardInterval Indicates the physical port input discard interval, it must be a multiple of 10, the default is 300 seconds | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.43 |
| hwInputDiscardStatistics Indicates the physical port input discard statistics | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.44 |
| hwOutputDiscardEnable Indicates whether output discard traps should be
generated for this physical port.
By default, the value is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.45 |
| hwOutputDiscardThreshold Indicates the physical port output discard threshold, the default is 3000 packets | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.46 |
| hwOutputDiscardInterval Indicates the physical port output discard interval, it must be a multiple of 10, the default is 300 seconds | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.47 |
| hwOutputDiscardStatistics Indicates the physical port output discard statistics | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.48 |
| hwBandwidthLast Indicates the physical port last bandwidth. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.49 |
| hwPhysicalPortInChassis Indicates the physical port in chassis. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.5 |
| hwBandwidthCurrent Indicates the physical port current bandwidth. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.50 |
| hwPhysicalPortInSlot Indicates the SlotID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.6 |
| hwPhysicalPortInCard Indicates the CardID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.7 |
| hwPhysicalPortInPort Indicates the PortID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.8 |
| hwPhysicalAutoShutLaserEnable This object indicates the automatic disabling of LASER. By default, automatic disabling of LASER is not supported. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 |