hwDs1FrameFormat

HUAWEI-PORT-MIB · .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16

MIB view Table view

Object

column r/w Enumeration

Indicates the frame format of the interface.
crc4: indicates that the frame format is CRC4.
no-crc4: indicates that the frame format is no-CRC4.
sf: indicates that the frame format is Super Frame.
esf: indicates that the frame format is Extended Super Frame.
By default, the frame format of an E1 interface is no-crc4.
By default, the frame format of a T1 interface is esf.

Context

MIB: HUAWEI-PORT-MIB
OID: .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16
Type: column
Access: readwrite
Status: current
Parent: hwDs1Entry
Table: hwDs1Table
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	esf
`2`	sf
`3`	noCrc4
`4`	crc

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwDs1ParentIfIndex Indicates the index of the parent interface.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1`
hwDs1ChannelType Indicates the interface type. The type can be E1/CE1 or T1/CT1.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11`
hwDs1IfType Indicates the interface tyep. e3: is multiplexed by CE3 interfaces. t3: is multiplexed by CT3 interfaces. cpos: is multiplexed by CPOS interfaces. atm: is multiplexed by ATM inter…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12`
hwDs1Channelized Indicates the working mode of the interface. true: indicates the channelized mode. false: indicates the clear channel mode. The default is true.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13`
hwDs1CodeType Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Su…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14`
hwDs1Clock Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15`
hwDs1Cable The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable. The default is short. If no cable is connected, this parameter is displayed as null.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17`
hwDs1Loopback Enable the loopback function of the interface. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remot…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18`
hwDs1ClockRecoveryDomain Indicates the clock recovery domain of the interface.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19`
hwDs1ChannelId Indicates the channel ID.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2`
hwDs1PWClockDomain Indicates the clock recovery domain of the interface.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20`
hwDs1WorkMode Indicates the clock recovery domain of the interface.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21`
hwDs1EsAlarmTriggerThreshold The trigger threshold of code violation count threshold crossing alarm of E1 line side .	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22`
hwDs1EsAlarmResumeThreshold The resume threshold of code violation count threshold crossing alarm of E1 line side .	column	Integer32	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23`
hwDs1IfIndex Indicates the interface index.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3`
hwDs1RowStatus This variable is used to create or delete an object.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51`
hwDs1Lbo The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52`
hwDs1CableLength The cableLength of T1 port. Unit: feet.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53`