hwEthernetSpeedSet

HUAWEI-PORT-MIB · .1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13
MIB view Table view

Object

column r/w Enumeration 
This object indicates the transmission rate of the Ethernet interface. You can configure transmission rates for only certain Ethernet electrical interfaces, and you cannot configure transmission rates for optical interfaces. The transmission rate for an electrical interface can be set to 10M, 100M, or 1000M.

Context

MIB
HUAWEI-PORT-MIB
OID
.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.13
Type
column
Access
readwrite
Status
current
Parent
hwEthernetEntry
Table
hwEthernetTable
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2speed10
3speed100
4speed1000
5speed10000
6speed40000
7speed20000
8speed2500
9speed5000
10speed100000
11speed12000
12speed48000
13speed25000
14speed50000
15speed200000
16speed400000
17speed12500

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwEthernetIfIndex
This object indicates the interface index.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.1
hwEthernetLoopback
This object indicates the internal loop (local loopback) function, which is used to test a local interface. When the interface works normally, the local loopback function must be …
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.11
hwEthernetPortType
This object indicates the type of an Ethernet interface, either the optical interface or the electrical interface.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.12
hwEthernetDuplex
This object indicates the duplex mode of an Ethernet interface. Ethernet electrical interfaces can work in either half-duplex or full-duplex mode. Ethernet optical interfaces can …
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.14
hwEthernetNegotiation
This object indicates whether auto-negotiation is enabled on an Ethernet electrical interface. The default value is enable. For an Ethernet electrical interface, hwEthernetSpeedS…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.15
hwEthernetPortTypeOperate
This object indicates the link type of an Ethernet interface, either optical fibers or cables. This object is only supported by certain Ethernet interfaces.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.16
hwEthernetClock
This object indicates the clock mode. By default, the slave clock mode is used. Only WAN interfaces require the clock configuration.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.20
hwEthernetFlagJ0Mode
This object indicates that 10GE WAN interfaces have to use SDH/SONET as the frame format and the overhead byte has to be set. The overhead byte of an SDH frame can be: j0: indicat…
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.21
hwEthernetFlagJ0Value
This object indicates that when hwEthernetFlagJ0Mode is set to j01ByteMode, this object takes effect.
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.22
hwEthernetFlagJ0Trace
This object indicates the section trace byte. When hwEthernetFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this object takes effect. When hwEthernetFlagJ0Mode is set to…
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.23
hwEthernetFlagJ1Mode
This object indicates the overhead byte of an SDH frame. j1 indicates the path trace byte. By default, the value is j116ByteMode(2): hwEthernetFlagJ1Trace: NetEngine.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.24
hwEthernetFlagJ1Value
This object indicates that when hwEthernetFlagJ1Mode is set to j11ByteMode, this object takes effect.
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.25
hwEthernetFlagJ1Trace
This object indicates the path trace byte. When hwEthernetFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this object takes effect. When hwEthernetFlagJ1Mode is set to j1…
columnOctetString.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.26
hwEthernetFlagC2Value
This object indicates the overhead byte of the SDH frame. C2: indicates the path signal label byte. The value ranges from 00 to FF, in the hexadecimal format. The default value is…
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.27
hwEthernetUpHoldTime
This object indicates the time period during which the interface remains Up.
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.31
hwEthernetDownHoldTime
This object indicates the time period during which the interface remains Down.
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.32
hwEthernetSubinterfaceStatisticEnable
This object indicates statistics collection is enabled for a sub-interface.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.33
hwEthernetFlowControl
This object indicates the interface flow control status.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.34
hwEthernetOffline
This object indicates that the physical protocol status of an interface is Down.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.35
hwEthernetSetTransferMode
This object indicates the LAN-WAN mode of an Ethernet interface.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.36
hwEthernetJumboframeMaxLength
This object indicates the maximum length of the Jumbo frame on an interface.
columnInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.37
hwEthernetComboType
combo mode of this port.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.38
hwEthernetPortMode
Indicates combo mode of this port.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.39
hwEthernetNegotiationMode
Set negotiation-mode for phy of electronic GE port.The mode is uesed for synchronizing clock.
columnEnumeration.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.40
hwEthernetCarrierTransitions
Number of times the interface state has transitioned from up to down since the time the device restarted.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.157.1.1.1.1.41