hwCposIfType
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12
Object
column
r/w
Enumeration
Indicates the interface type.
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.3.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwCposEntry
- Table
- hwCposTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | stm1 |
2 | stm16 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwCposIfIndex Interface index(es) of port(s) present on the device . | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.1 |
| hwCposClock Indicates whether the clock is in master mode or slave mode.
By default, the clock is in slave mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.11 |
| hwCposFrameFormat Indicates the frame type of the CPOS interface. By default, the frame type of the CPOS interface is SDH. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.13 |
| hwCposMultiplex Indicates the multiplex mode of the AUG. By default, the multiplex mode of the AUG is au-4. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.14 |
| hwCposLoopback Indicates the loopback function of the CPOS interface. By default, the loopback function is disabled. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.15 |
| hwCposFlagJ0Mode Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwCposFlagJ0Trace NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.21 |
| hwCposFlagJ0Value j01ByteMode Value . When hwCposFlagJ0Mode is set to j01ByteMode, hwCposFlagJ0Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.22 |
| hwCposFlagJ0Trace Set section trace byte.
When hwCposFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect.
When hwCposFlagJ0Mode is set to j016ByteMode, this variable… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.23 |
| hwCposFlagJ1Mode Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwCposFlagJ1Trace NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.24 |
| hwCposFlagJ1Value Indicates the value of j11ByteMode. When hwCposFlagJ1Mode is set to j11ByteMode, hwCposFlagJ1Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.25 |
| hwCposFlagJ1Trace Set path trace byte.
When hwCposFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect.
When hwCposFlagJ1Mode is set to j116ByteMode, this variable is… | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.26 |
| hwCposFlagC2Value Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 22(0x16). | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.27 |
| hwCposB1SdAlarmThreshold The threshold of B1 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.28 |
| hwCposB1ExcAlarmThreshold The threshold of B1 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.29 |
| hwCposB2SdAlarmThreshold The threshold of B2 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.30 |
| hwCposB2ExcAlarmThreshold The threshold of B2 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.31 |
| hwCposB3SdAlarmThreshold The threshold of B3 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.32 |
| hwCposB3ExcAlarmThreshold The threshold of B3 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.33 |
| hwCposLpBipSdAlarmThreshold The threshold of BIP2 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.34 |
| hwCposLpBipExcAlarmThreshold The threshold of BIP2 threshold crossing alarm. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.35 |
| hwCposHighPathNumber Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 22(0x16). | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.36 |
| hwCposLowPathNumber Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 22(0x16). | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.37 |
| hwCposMappingMode Indicates the mapping mode of cpos port, default if h-mode(1). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.38 |
| hwCposRxJ0Mode Indicates the received J0 mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.39 |
| hwCposRxJ1Mode Indicates the received J1 mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.40 |
| hwCposRxJ0Value Indicates the received J0 value of 1-byte mode. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.41 |
| hwCposRxJ1Value Indicates the received J1 value of 1-byte mode. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.42 |
| hwCposRxJ0Trace Indicates the received J0 characters of 16-byte or 64-byte mode. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.43 |
| hwCposRxJ1Trace Indicates the received J1 characters of 16-byte or 64-byte mode. | column | OctetString | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.44 |
| hwCposVc4Flag The value of this object identifies whether a VC4 channel can be created on the CPOS interface.
0 indicates that no VC4 channel can be created on the CPOS interface.
1 indicates … | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.3.1.1.45 |