hwDs1CodeType
HUAWEI-PORT-MIB ·
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14
Object
column
r/w
Enumeration
Indicates the code type of the interface. ami: is short for Alternate Mark Inversion. hdb3: is short for High Density Bipolar of Order 3. b8zs: is short for Bipolar with 8-Zero Substitution. none: is not supported
Context
- MIB
- HUAWEI-PORT-MIB
- OID
.1.3.6.1.4.1.2011.5.25.157.1.5.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwDs1Entry
- Table
- hwDs1Table
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ami |
2 | hdb3 |
3 | b8zs |
255 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDs1ParentIfIndex Indicates the index of the parent interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.1 |
| hwDs1ChannelType Indicates the interface type. The type can be E1/CE1 or T1/CT1. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.11 |
| hwDs1IfType Indicates the interface tyep.
e3: is multiplexed by CE3 interfaces.
t3: is multiplexed by CT3 interfaces.
cpos: is multiplexed by CPOS interfaces.
atm: is multiplexed by ATM inter… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.12 |
| hwDs1Channelized Indicates the working mode of the interface.
true: indicates the channelized mode.
false: indicates the clear channel mode.
The default is true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.13 |
| hwDs1Clock Indicates the clock mode of the interface.
master: indicates that the clock works in master mode and uses the internal clock signal.
slave: indicates that the clock works in slave… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.15 |
| hwDs1FrameFormat Indicates the frame format of the interface.
crc4: indicates that the frame format is CRC4.
no-crc4: indicates that the frame format is no-CRC4.
sf: indicates that the frame forma… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.16 |
| hwDs1Cable The cable command takes effect only if the E1 interface card uses 75-ohm coaxial cable.
The default is short. If no cable is connected, this parameter is displayed as null. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.17 |
| hwDs1Loopback Enable the loopback function of the interface.
local: enables the local loopback on the interface.
remote: enables the remote loopback on the interface.
payload: enables the remot… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.18 |
| hwDs1ClockRecoveryDomain Indicates the clock recovery domain of the interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.19 |
| hwDs1ChannelId Indicates the channel ID. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.2 |
| hwDs1PWClockDomain Indicates the clock recovery domain of the interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.20 |
| hwDs1WorkMode Indicates the clock recovery domain of the interface. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.21 |
| hwDs1EsAlarmTriggerThreshold The trigger threshold of code violation count threshold crossing alarm of E1 line side . | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.22 |
| hwDs1EsAlarmResumeThreshold The resume threshold of code violation count threshold crossing alarm of E1 line side . | column | Integer32 | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.23 |
| hwDs1IfIndex Indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.3 |
| hwDs1RowStatus This variable is used to create or delete an object. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.51 |
| hwDs1Lbo The lbo of T1 port. Unit: db. the value is expanded 10 times,so the real value should be reduced 10 times | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.52 |
| hwDs1CableLength The cableLength of T1 port. Unit: feet. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.157.1.5.1.1.53 |