HUAWEI-NTEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

335

hwPstnCircuitTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.1 · 1 row entry · 34 columns

Open in standard view

Operation table for the PSTN subscriber circuit test:
It realizes the function of the circuit test for analog subscribers in the system. The circuit test helps you to ensure that the service board can provide the functions such as ringing, feeder, and dial tone. The circuit test also helps you to ensure that the parameters such as the feeder voltage and ringing current voltage are normal.
This function facilitates the maintenance of the subscriber circuits, especially the internal circuits of the service boards.
The index of this table is ifIndex.

hwPstnCircuitTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.1.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwPstnCircuitTestOprType

Describes the Circuit test-Operation Type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.1

hwPstnCircuitTestOffHook

Describes the Circuit test-Off hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.2

hwPstnCircuitTestOffHookCount

Circuit test-Off hook count

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.3

hwPstnCircuitTestDialTone

Describes the Circuit test-Dial tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.4

hwPstnCircuitTestReceivePulse

Describes the Circuit test-Receiving pulse.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.5

hwPstnCircuitTestReceiveDTMF

Describes the Circuit test-Receiving DTMF.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.6

hwPstnCircuitTestRingBackTone

Describes the Circuit test-Ring back tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.7

hwPstnCircuitTestBusyTone

Describes the Circuit test-Busy tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.8

hwPstnCircuitTestBatteryFeed

Describes the Circuit test-Feeder .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.9

hwPstnCircuitTestPoleDetect

Describes the Circuit test-Polarity reversal.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.10

hwPstnCircuitTestOnHook

Describes the Circuit test-On hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.11

hwPstnCircuitTestRing

Describes the Circuit test-Ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.12

hwPstnCircuitTestStopRing

Describes the Circuit test-Stop ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.13

hwPstnCircuitTestFeedV

Describes the Circuit test-Feeder voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.14

hwPstnCircuitTestRingV

Describes the Circuit test-Ringing current voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.15

hwPstnCircuitTestBusyProcFlag

Describes the Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentest(3) -indicates forced test on busy

Enumerationr/w

Enumerated Values:

1	busynotest
2	busytest
3	busystrentest

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.16

hwPstnCircuitTestStatus

Describes the Circuit test-Inline Test Status.
Options:
1. normal(1) -indicates normal
2. testfail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) …

Enumeration

Enumerated Values:

1	normal
2	testfail
3	portbusy
4	outoftime
5	testingAbnormal
6	broadbandtesting
7	capturefail
8	notratb

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17

hwPstnCircuitTestOffHookResult

Describes the Circuit Test Result-Off hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosup…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.18

hwPstnCircuitTestDialToneResult

Describes the Circuit Test Result-dial tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosu…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.19

hwPstnCircuitTestReceivePulseResult

Describes the Circuit Test Result-Receiving pulse.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.20

hwPstnCircuitTestReceiveDTMFResult

Describes the Circuit Test Result-Receiving DTMF.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4.…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.21

hwPstnCircuitTestRingBackResult

Describes the Circuit Test Result-Ring back tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4.…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.22

hwPstnCircuitTestBusyToneResult

Describes the Circuit Test Result-Busy tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosu…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.23

hwPstnCircuitTestBatteryFeedResult

Describes the Circuit Test Result-Feeder.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosuppo…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.24

hwPstnCircuitTestPoleDetectResult

Describes the Circuit Test Result-Polarity reversal.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.25

hwPstnCircuitTestOnHookResult

Describes the Circuit Test Result-On hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosupp…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.26

hwPstnCircuitTestRingResult

Describes the Circuit Test Result-Ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosupp…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.27

hwPstnCircuitTestStopRingResult

Describes the Circuit Test Result-Stop ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. n…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	testouttime
4	nosupport

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.28

hwPstnCircuitTestFeedVValue

Describes the Circuit Test Result-Feeder voltage.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.29

hwPstnCircuitTestFeedVResult

Describes the Circuit Test Result-Feeder voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.30

hwPstnCircuitTestRingVValue

Describes the Circuit Test Result-Ringing current voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.31

hwPstnCircuitTestRingVResult

Describes the Circuit Test Result-Ringing current voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.32

hwPstnCircuitTestLoopCurrentValue

Describes the Circuit Test Result-Loop current.
Unit: microampere, ab. uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.33

hwPstnCircuitTestLoopCurrentResult

Describes the Circuit Test Result-Loop current Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.34

hwIsdnUserInTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.2 · 1 row entry · 18 columns

Open in standard view

Describes the Operation table for the ISDN subscriber circuit test:
It realizes the function of the circuit test for ISDN subscribers in the system. In the circuit test, the status (activated, deactivated) of the LT U port, LT power supply voltage, LT power supply overflow auto protection, manual switch-off line feeding voltage, and manual switch-on line feeding voltage are measured.
The test result shows whether the ISDN subscriber circuit works in the normal state.
The index of this table is ifIndex.

hwIsdnUserInTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.2.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnUserInTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.1

hwIsdnUserInTestActive

Describes the ISDN subscriber circuit test-Active.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.2

hwIsdnUserInTestDeactive

Describes the ISDN circuit test-Deactive.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.3

hwIsdnUserInTestLtSupplyPowerVol

Describes the ISDN circuit test-LT supply power.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.4

hwIsdnUserInTestLtCurrentProctect

Describes the ISDN circuit test-LT power supply overflow auto protection .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.5

hwIsdnUserInTestCutLineVol

Describes the ISDN circuit test-Manual switch-off line feeding voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.6

hwIsdnUserInTestSwitchOnVol

Describes the ISDN circuit test-Manual switch-on line feeding voltage .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.7

hwIsdnUserInTestBusyProcFlag

Describes the Busy control flag .
Options:
1. busynotest(1) -no test when busy
2. busytest(2) -remedy test when busy
3. busystrentest(3) -forced test on busy

Enumerationr/w

Enumerated Values:

1	busynotest
2	busytest
3	busystrentest

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.8

hwIsdnUserInTestStatus

Describes the Test status .
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates t…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.9

hwIsdnUserInTestActiveResult

Describes the Activation result .
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4. note…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outOfTime
4	notest

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.10

hwIsdnUserInTestDeactiveResult

Describes the Deactivation result.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outoftime(3) -indicates timed-out
4. not…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outoftime
4	notest

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.11

hwIsdnUserInTestLtSupplyPowerCap

LT power supply voltage
Unit: millivolt

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.12

hwIsdnUserInTestLtSupplyPowerCapResult

Describes the Test result-LT power supply voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4.…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outOfTime
4	notest
5	dslBoardNoSupport

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.13

hwIsdnUserInTestLtCurrentProctectResult

Describes the LT over current auto-protection capability .
Options:
1. outOfTime(1) -indicates timed-out
2. noProtect(2) -indicates not protected
3. protectNoRestore(3) -indicates pro…

Enumeration

Enumerated Values:

1	outOfTime
2	noProtect
3	protectNoRestore
4	protectAndRestore
5	dslBoardNoSupport

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.14

hwIsdnUserInTestCutLineVolVal

Describes the Manual switch-off line feeding voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.15

hwIsdnUserInTestCutLineVolResult

Describes the Test result-Manual switch-off line feeding voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out …

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outOfTime
4	notest
5	dslBoardNoSupport

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.16

hwIsdnUserInTestSwitchOnVolVal

Describes the Switch on voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.17

hwIsdnUserInTestSwitchOnVolResult

Describes the Test result-switch on voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4. notes…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outOfTime
4	notest
5	dslBoardNoSupport

.1.3.6.1.4.1.2011.6.21.2.1.1.2.1.18

hwIsdnUserOutTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.3 · 1 row entry · 13 columns

Open in standard view

Operation table for the ISDN subscriber loop-line test:
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the Activate NT1, Deactivate NT1, and Transmission Bit Error Rate are tested.
The index of this table is ifIndex.

hwIsdnUserOutTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.3.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnUserOutTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.1

hwIsdnUserOutTestActiveNT1

Describes the ISDN loop line test-Activate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.2

hwIsdnUserOutTestDeactiveNT1

Describes the ISDN loop line test-Deactivate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.3

hwIsdnUserOutTestTransBitError

Describes the ISDN loop line test-Transmission Bit Error Rate.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.4

hwIsdnUserOutTestErrCodeTestTime

Describes the Bit Error Rate Test Duration.
Unit: s.
Default: 120 s for the EMS

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.5

hwIsdnUserOutTestBusyProcessFlag

Describes the Busy control flag.
Options:
1. busyNoTest(1) -indicates no test when busy
2. busyTest(2) -indicates remedy test when busy

Enumerationr/w

Enumerated Values:

1	busyNoTest
2	busyTest

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.6

hwIsdnUserOutTestStatus

Describes the Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates ti…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.7

hwIsdnUserOutTestActNT1Result

Describes the Activation NT1 result .
Options:
1. normal(1) -indicates Normal
2. activeFail(2) -indicates failure
3. noNt1OrNt1NotUse(3) -indicates no NT1 or NT1 is unavailable
4. activ…

Enumeration

Enumerated Values:

1	normal
2	activeFail
3	noNt1OrNt1NotUse
4	activeUifSuccess
5	activeUifAndSifSuccess
6	outOfTime
7	startTestFail

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.8

hwIsdnUserOutTestDeactNT1Result

Describes the Test result-Deactivate NT1.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outoftime(3) -indicates timed-out
4. notest(4) -indicates n…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	outoftime
4	notest

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.9

hwIsdnUserOutTestTransBitErrorResult

Describes the Test result-Transmission bit error rate.
Options:
1. normal(1) -indicates normal
2. nt1BadOrNoTexist(2) -indicates NT1 is bad or no NT1
3. nt1ActiveFail(3) -indicates activating NT1 fail…

Enumeration

Enumerated Values:

1	normal
2	nt1BadOrNoTexist
3	nt1ActiveFail
4	nt1LoopFail
5	syncFail
6	outOfTime
7	notest

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.10

hwIsdnUserOutTestTotalSend

Describes the Total number of sent bits

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.11

hwIsdnUserOutTestCodeErrorNumber

Describes the Number of bit errors

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.12

hwIsdnUserOutTestCodeErrorRate

Describes the Bit error rate

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.13

hwIsdnUserOutLineTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.4 · 1 row entry · 35 columns

Open in standard view

Operation table for the ISDN subscriber loop-line test.
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the voltage, resistance and capacitance of the loop line are tested to check for faults such as broken circuit, short circuit, grounding and cross-connected line.
The index of this table is ifIndex

hwIsdnUserOutLineTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.4.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnUserOutLineTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.1

hwIsdnUserOutLineTestVoltage

ISDN loop line test-Voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.2

hwIsdnUserOutLineTestResistance

ISDN loop line test-Resistance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.3

hwIsdnUserOutLineTestCapacitance

ISDN loop line test-Capacitance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.4

hwIsdnUserOutLineTestBusyProcFlag

Busy control flag .
Options:
1. busyNoTest(1) -indicates no test when busy
2. busyTest(2) -indicates remedy test when busy

Enumerationr/w

Enumerated Values:

1	busyNoTest
2	busyTest

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.5

hwIsdnUserOutLineTestStatus

Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5.…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.6

hwIsdnUserOutLineTestConclusion

Conclusion
Range:1-89
(Enumerated type.
1: Normal 2: Contact with the power line 3: A line mixed with others 4: B line mixed with others
5: Mixed with others (two lines) 6: A line grounding 7: B line grounding 8: AB g…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.7

hwIsdnUserOutLineTestACAG

A->ground AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.8

hwIsdnUserOutLineTestACBG

B->ground AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.9

hwIsdnUserOutLineTestACAB

A->B AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.10

hwIsdnUserOutLineTestDCAG

A->ground DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.11

hwIsdnUserOutLineTestDCBG

B->ground DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.12

hwIsdnUserOutLineTestDCAB

A->B DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.13

hwIsdnUserOutLineTestRAG

A->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.14

hwIsdnUserOutLineTestRBG

B->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.15

hwIsdnUserOutLineTestRAB

A->B insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.16

hwIsdnUserOutLineTestCapAG

A->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.17

hwIsdnUserOutLineTestCapBG

B->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.18

hwIsdnUserOutLineTestCapAB

A->B capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.19

hwIsdnUserOutLineTestImpedance

Loop-Line Test-Impedance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.20

hwIsdnUserOutLineTestImpedanceAB

A->B impedance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.21

hwIsdnUserOutLineTestImpedanceBA

B->A impedance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.22

hwIsdnUserOutLineTestImpedanceAG

A->ground impedance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.23

hwIsdnUserOutLineTestImpedanceBG

B->ground impedance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.24

hwIsdnUserOutLineTestCurrent

Loop line test-Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.25

hwIsdnUserOutLineTestACCurrentAG

A->ground AC current
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.26

hwIsdnUserOutLineTestACCurrentBG

B->ground AC current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.27

hwIsdnUserOutLineTestACCurrentAB

AB AC current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.28

hwIsdnUserOutLineTestDCCurrentAG

A->ground DC current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.29

hwIsdnUserOutLineTestDCCurrentBG

B->ground DC current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.30

hwIsdnUserOutLineTestDCCurrentAB

AB DC current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.31

hwIsdnUserOutLineTestLoopCurrent

Loop-Line Test-Loop Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.32

hwIsdnUserOutLineTestLC

Loop Current.
Unit: mA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.33

hwIsdnUserOutLineTestNoise

Loop-Line Test-Noise .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.34

hwIsdnUserOutLineTestN

Noise.
Unit: dBm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.35

hwIsdnPortStateSwitchTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.5 · 1 row entry · 2 columns

Open in standard view

Operation table for the test on ISDN port status switching:
It realizes the function of the test on ISDN port status switching in the system. In the test, the status of a port is switched between NT1 and LT to check whether the NT1 and LT functions of the port work.
The index of this table is ifIndex

hwIsdnPortStateSwitchTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.5.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnPortStateSwitchTestOprType

Operation type .
Options:
1. switchNT1(1) -indicates Switch to NT1
2. switchLT(2) -indicates Switch to LT
3. switchnormal(3) -indicates Switch to the normal state

Enumerationr/w

Enumerated Values:

1	switchNT1
2	switchLT
3	switchnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.5.1.1

hwIsdnPortStateSwitchTestStatus

Test status.
Options:
1. success(1) -indicates normal
2. failure(2) -indicates abnormal
3. portBusy(3) -indicates busy port
4. timeOut(4) -indicates timed-out
5. testingAbnormal(5) -indic…

Enumeration

Enumerated Values:

1	success
2	failure
3	portBusy
4	timeOut
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.5.1.2

hw112UserRingTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.6 · 1 row entry · 3 columns

Open in standard view

Ringing test on the 112 analog subscriber phones:
It realizes the function of the ringing test on the phones of subscribers in the system. This test helps check whether a subscriber phone can ring normally.
The index of this table is ifIndex

hw112UserRingTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.6.1

Indexes

IF-MIBifIndex

Column Syntax OID

hw112UserRingTestOprType

Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.6.1.1

hw112UserRingTestTime

Ringing duration.
Unit: second

Integer32r/w

Constraints:
range: 3-60

.1.3.6.1.4.1.2011.6.21.2.1.1.6.1.2

hw112UserRingTestResult

Test result.
Options:
1. offhook(1) -indicates off hook
2. onhook(2) -indicates on hook
The 112 protocol defines only two test results.

Enumeration

Enumerated Values:

1	offhook
2	onhook

.1.3.6.1.4.1.2011.6.21.2.1.1.6.1.3

hw112UserDialTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.7 · 1 row entry · 11 columns

Open in standard view

Operation table for the test on the DTMF or pulse feature of the 112 analog subscriber phones:
It realizes the test on the DTMF or pulse feature of the subscriber phones in the system. This test helps check whether a subscriber phone can make calls normally.
The index of this table is ifIndex

hw112UserDialTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.7.1

Indexes

IF-MIBifIndex

Column Syntax OID

hw112UserDialTestOprType

Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.1

hw112UserDialTestReceiveNumber

Number of received calls

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.2

hw112UserDialTestResult

Operation result.
Options:
1. success(1) -indicates the test is successful
2. fail(2) -indicates the test fail

Enumeration

Enumerated Values:

1	success
2	fail

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.3

hw112UserDialTestDigit

Dialing numeral.
Options:
1. n1(1) -indicates 1
2. n2(2) -indicates 2
3. n3(3) -indicates 3
4. n4(4) -indicates 4
5. n5(5) -indicates 5
6. n6(6) -indicates 6
7. n7(7) -indicate…

Enumeration

Enumerated Values:

1	n1
2	n2
3	n3
4	n4
5	n5
6	n6
7	n7
8	n8
9	n9
10	n0
11	nStar
12	nWell
13	nOthers
14	onhook

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.4

hw112UserDialTestLowLevel

Digital low power level.
Unit: dBm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.5

hw112UserDialTestHighLevel

Digital high power level.
Unit: dBm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.6

hw112UserDialTestLowFreq

Digital low frequency.
Unit: Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.7

hw112UserDialTestHighFreq

Digital high frequency.
Unit: Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.8

hw112UserDialTestPulseLen

Pulse length.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.9

hw112UserDialTestMakeDur

Pulse duration.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.10

hw112UserDialTestBreakDur

Pulse break length.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.7.1.11

hw112UserHowlerTestOprrTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.8 · 1 row entry · 3 columns

Open in standard view

Operation table for the howler tone test on 112 analog subscriber phones:
It realizes the function of the howler tone test on the subscriber phones in the system. This test helps check whether a subscriber phone can play the howler tone normally.
The index of this table is ifIndex

hw112UserHowlerTestOprrEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.8.1

Indexes

IF-MIBifIndex

Column Syntax OID

hw112UserHowlerTestOprType

Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.8.1.1

hw112UserHowlerTestTime

Howler tone length.
Unit: second

Integer32r/w

Constraints:
range: 3-180

.1.3.6.1.4.1.2011.6.21.2.1.1.8.1.2

hw112UserHowlerTestResult

Operation result.
Options:
1. offhook(1) -indicates off hook
2. onhook(2) -indicates on hook
The 112 protocol defines only two test results.

Enumeration

Enumerated Values:

1	offhook
2	onhook

.1.3.6.1.4.1.2011.6.21.2.1.1.8.1.3

hw112IsdnDiagnoseTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.9 · 1 row entry · 12 columns

Open in standard view

Operation table for the diagnosis test on the 112 ISDN subscribers:
It realizes the function of the diagnosis test on the 112 ISDN subscribers in the system. Its test items are the same as the test items of the circuit test on the PSTN subscribers.
The index of this table is ifIndex

hw112IsdnDiagnoseTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.9.1

Indexes

IF-MIBifIndex

Column Syntax OID

hw112IsdnDiagnoseTestOprType

Operation type .
Options:
1. start(1) -start the test
2. stop(2) -stop the test
Note:The 112 protocol does not define the stop command.

Enumerationr/w

Enumerated Values:

1	start
2	stop

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.1

hw112IsdnDiagnoseTestLoopType

Loopback type.
Options:
1. nt1(1) -indicates NT1
2. ltet(2) -indicates LT/ET

Enumerationr/w

Enumerated Values:

1	nt1
2	ltet

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.2

hw112IsdnDiagnoseTestLoopChannel

Loopback .
Options:
1. bOne(1) -indicates B1
2. bTwo(2) -indicates B2
3. twoBAndD(3) -indicates 2B+D
4. pra(4) -indicates PRA

Enumerationr/w

Enumerated Values:

1	bOne
2	bTwo
3	twoBAndD
4	pra

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3

hw112IsdnDiagnoseTestResult

Operation result.
Options:
1. success(1) -indicates loopback success, and user stop the test manually;
2. failure(2) -indicates loopback failure;
3. timeoutsuccess(3) -indicates loopback success, a…

Enumeration

Enumerated Values:

1	success
2	failure
3	timeoutsuccess
4	exceptionstop
5	testcanceled

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.4

hw112IsdnDiagnoseTestLoopTime

Loop time.
Unit: minute

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.5

hw112IsdnDiagnoseTestLoopDirection

Loop direction.
Options:
1. nearloop(1) -indicates loop direction is near loop
2. farloop(2) -indicates loop direction is far loop

Enumerationr/w

Enumerated Values:

1	nearloop
2	farloop

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.6

hw112IsdnDiagnoseTestLoopTs

Time slot to be looped back

Integer32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.7

hw112IsdnDiagnoseTestDeferredTestFlag

deferred test flag:
Options:
1. immediatetest(1) -immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, the test operation
…

Enumerationr/w

Enumerated Values:

1	immediatetest
2	deferredtest

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8

hw112IsdnDiagnoseTestDeferredTime

Deferred time(unit: minute):
this leaf node is valid only when the value of hw112IsdnDiagnoseTestDeferredTestFlag is deferredtest(2).
Default: 30(minute).

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.9

hw112IsdnDiagnoseTestTimeoutProc

Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Timeout proc:
1-when deferred time out, if the port is still in service, test will be canceled;
2-when deferred time out, if the port…

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.10

hw112IsdnDiagnoseTestIfIndex

Port IfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.11

hw112IsdnDiagnoseTestRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.12

hwPstnCallerEmulateOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.10 · 1 row entry · 11 columns

Open in standard view

Operation table for the PSTN call emulation test (calling party):
It realizes the function of the call emulation test (caller dial) in the system. This test helps check whether a subscriber port can make calls normally as a calling party.
The index of this table is ifIndex.

hwPstnCallerEmulateOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.10.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwPstnCallerEmulateOprType

Operation type.
Options:
1: stop(1) -indicates Stop test
2: start(2) -indicates Start test
3: offHookConfirm(3) -indicates Off hook confirmation
4: sendDTMF(4) -indicates Send DTMF

Enumerationr/w

Enumerated Values:

1	stop
2	start
3	offHookConfirm
4	sendDTMF

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.1

hwPstnCallerEmulateCalledTelNo

Called telephone number (max length: 32)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.2

hwPstnCallerEmulateDialMode

Dial type (Enumerated type.)
Options:
1. dtmf(1) -indicates the dial mode is DTMF
2. pulse(2) -indicates the dial mode is pulse

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.3

hwPstnCallerEmulateTestStatus

Test Status.
Options:
1. startSuccessfully(1) -indicates start successfully
2. stopSuccessfully(2) -indicates stop successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF successfully
4. t…

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	sendDTMFSuccessfully
4	testOuttime
5	noDialtone
6	callerDialNumberAlready
7	noRinging
8	noRingbackTone
9	waitingAgentMessageOuttime
10	testingFailure
11	agentMessageAck
12	calledoffhook
13	testingAbnormal
14	broadbandtesting
15	capturefail
16	notratb
17	configsuccessfully
18	ring
19	calleroffhook
20	playdialtone
21	receiving
22	dialnumbercomplete
23	ringingbacktone
24	talking
28	testfinished

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.4

hwPstnCallerEmulateTestResult

Emulational Caller Test Result
Options:
1. callerNoDialTone(1) -indicates the caller does not have dial tone
2. callerOffHookingBusy(2) -indicates the caller is busy in off-hooking
3. callerDialingBusy(3)…

Enumeration

Enumerated Values:

1	callerNoDialTone
2	callerOffHookingBusy
3	callerDialingBusy
4	callerNoDial
5	callerDialedBusy
6	callerDialedNoTalk
7	callRelease
8	matchNoCompleted
9	sendNoCompleted
10	testSucceed
11	callerMatchFailed
12	callerPortAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.5

hwPstnCallerEmulateTestDTMFDetected

Detected Dtmf Num List

OctetString

Constraints:
range: 64-64

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.6

hwPstnCallerEmulateTestHoldTime

Caller Emulate test hold time, the test will auto ended when this time out.

Unsigned32r/w

Constraints:
range: 5-600

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.7

hwPstnCallerEmulateReportNumber

The actual called number string checked and send to MGC or IMS.

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.8

hwPstnCallerEmulateLocalErrorCode

Error code send by Local side.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.9

hwPstnCallerEmulateRemoteErrorCode

Error code received from remote side.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.10

hwPstnCallerEmulateTestRequestID

Request ID

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.10.1.11

hwPstnCalledEmulateOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.11 · 1 row entry · 9 columns

Open in standard view

The operation table of the caller test of the PSTN call emulation test. It is used to realize the caller
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the
caller can make a call.
Operation table for the PSTN call emulation test (called party):
It realizes the function of the call emulation test (called party) in the system. This test helps check whether a subscriber port can make calls normally as a called party.
The index of this table is ifIndex

hwPstnCalledEmulateOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.11.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwPstnCalledEmulateOprType

Operation type.
Options:
1. stop(1) -indicates Stop test
2. start(2) -indicates Start test
3. dialConfirm(3) -indicates Dial number confirmation
4. sendDTMF(4) -indicates Send DTMF
5. config(5) …

Enumerationr/w

Enumerated Values:

1	stop
2	start
3	dialConfirm
4	sendDTMF
5	config

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.1

hwPstnCalledEmulateTestStatus

Test Status.
Options:
1. startSuccessfully(1) -indicates start successfully
2. stopSuccessfully(2) -indicates stop successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF successfully
4. testO…

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	sendDTMFSuccessfully
4	testOuttime
5	noDialtone
6	callerDialNumberAlready
7	noRinging
8	noRingbackTone
9	waitingAgentMessageOuttime
10	testingFailure
11	agentMessageAck
12	calledoffhook
13	testingAbnormal
14	broadbandtesting
15	capturefail
16	notratb
17	configsuccessfully
18	ring
19	calleroffhook
20	playdialtone
21	dialnumbercomplete
23	testfinished

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.2

hwPstnCalledEmulateTestResult

Emulational Called Test Result
Options:
1. calledNoRing(1) -indicates the called user dose not ring
2. calledNoOffHook(2) -indicates the called user dose not off hook
3. calledOffHookingBusy(3) …

Enumeration

Enumerated Values:

1	calledNoRing
2	calledNoOffHook
3	calledOffHookingBusy
4	calledNoTalk
5	callRelease
6	matchNoCompleted
7	sendNoCompleted
8	testSucceed
9	calledMatchFailed
10	calledPortAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.3

hwPstnCalledEmulateTestDTMFDetected

Detected Dtmf Num List

OctetString

Constraints:
range: 64-64

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.4

hwPstnCalledEmulateTestWaitTime

Called Emulate test waiting time, the test will auto failed when this time out and called port not received ring.

Unsigned32r/w

Constraints:
range: 5-600

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.5

hwPstnCalledEmulateTestHoldTime

Called Emulate test hold time, the test will auto ended when this time out.

Unsigned32r/w

Constraints:
range: 5-600

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.6

hwPstnCalledEmulateLocalErrorCode

Error code send by Local side.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.7

hwPstnCalledEmulateRemoteErrorCode

Error code received from remote side.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.8

hwPstnCalledEmulateTestRequestID

Request ID

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.6.21.2.1.1.11.1.9

hwPstnTelephoneTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.12 · 1 row entry · 11 columns

Open in standard view

The operation table of the called test of the PSTN call emulation test. It is used to realize the called
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the
called party can make a call.
The index of this table is ifIndex.
Operation table for the PSTN telephone test:
It realizes the function of the test on subscriber phones in the system. This test helps test the features of the subscriber phone and check whether a subscriber phone works in the normal state.

hwPstnTelephoneTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.12.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwPstnTelephoneTestOprType

Operation type.
Options:
1. stop(1) -indicates Stop test
2. start(2) -indicates Start test
3. ringing(3) -indicates Ring
4. stopRinging(4) -indicates Stop ringing
5. …

Enumerationr/w

Enumerated Values:

1	stop
2	start
3	ringing
4	stopRinging
5	recieveNumber
6	stopRecievingNumber
7	poleTest
8	loopResistance
9	busyTone
10	stopBusyTone
11	howlTone
12	stopHowlTone
13	flash
14	stopFlash

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.1

hwPstnTelephoneTestStatus

Test status.
Options:
1. startSuccessfully(1) -indicates Start test successfully
2. stopSuccessfully(2) -indicates Stop test successfully
3. testOuttime(3) -indicat…

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	testOuttime
4	asisportringing
5	detectRingingOuttime
6	waitingOffHookouttime
7	waitingoffHook
8	testingFailure
9	onHook
10	offHook
11	ringingSuccessful
12	stopRingingSuccessfully
13	startToRecieveDigit
14	stopRevievingDigitSuccessfully
15	sendBusyToneSuccessfully
16	stopBusyToneSuccessfully
17	sendHowlToneSuccessfully
18	stopHowlToneSuccessfully
19	startToRecieveFlash
20	stopRevFlashSuccessfully
21	waitHTcmdTimeout
22	reporttestreport
23	testingAbnormal
29	broadbandtesting
30	capturefail
31	notratb
32	ringtimeout

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.2

hwPstnTelephoneTestLoopResist

Loop resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.3

hwPstnTelephoneTestHookingTime

Hookflash time.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.4

hwPstnTelephoneTestReverse

Polarity reversal .
Options:
1: aPositiveAndbNegative(1) -indicates A+ B-
2: aNegativeAndbPositive(2) -indicates A- B+
3: noFeedVoltage(3) -indicates No feeding voltage
4: reverseTestOver(4) …

Enumeration

Enumerated Values:

1	aPositiveAndbNegative
2	aNegativeAndbPositive
3	noFeedVoltage
4	reverseTestOver

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.5

hwPstnTelephoneTestDialDigit

Dialing numeral
Options:
1. n1(1) -indicates 1
2. n2(2) -indicates 2
3. n3(3) -indicates 3
4. n4(4) -indicates 4
5. n5(5) -indicates 5
6. n6(6) -indicates 6
7. n7(7) -indicate…

Enumeration

Enumerated Values:

1	n1
2	n2
3	n3
4	n4
5	n5
6	n6
7	n7
8	n8
9	n9
10	n0
11	nStar
12	nWell
13	nOthers

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.6

hwPstnTelephoneTestPulseLen

Pulse length.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.7

hwPstnTelephoneTestMakeDur

Pulse duration.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.8

hwPstnTelephoneTestBreakDur

Pulse break length.
Unit: millisecond

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.9

hwPstnTelephoneTestAssisTelno

Telephone number of the assistant port (the host sends the number to the EMS when the telephone test starts)

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.10

hwPstnTelephoneTestRingTime

Ring time.
Unit: second

Integer32r/w

Constraints:
range: 0-360

.1.3.6.1.4.1.2011.6.21.2.1.1.12.1.11

hwIsdnUserDiagnoseTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.13 · 1 row entry · 2 columns

Open in standard view

Operation table for the diagnosis test on the ISDN subscribers:
It realizes the diagnosis test on the ISDN subscribers in the system. This test helps check the status and performance of the NT1 and transmission channel.
The index of this table is ifIndex

hwIsdnUserDiagnoseTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.13.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnUserDiagnoseTestOprType

Operation type.
Options:
1: activate(1) -indicates Activate
2: deactivate(2) -indicates Deactivate
3: bbdLoopbackFromNT1(3) -indicates 2B+D loopback on NT1
4: b1LoopbackFromNT1(4) -indicates …

Enumerationr/w

Enumerated Values:

1	activate
2	deactivate
3	bbdLoopbackFromNT1
4	b1LoopbackFromNT1
5	b2LoopbackFromNT1
6	depravingCRCRequest
7	depravingCRCAck
8	holdingState
9	restore
10	nT1PowerState
11	loopback1
12	cancelLoopback1
13	stopTest
14	loopback4
15	cancelloopback4
16	sendCCRC
17	stopSendCCRC
18	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.13.1.1

hwIsdnUserDiagnoseTestStatus

Test status.
Options:
1: startSuccessfully(1) -indicates Start test successfully (the EMS can activate or loop back a port without starting the test)
2: stopSuccessfully(2) …

Enumeration

Enumerated Values:

1	startSuccessfully
2	stopSuccessfully
3	testingNormal
4	actUIfouttime
5	dslDeactOrCancelLoop
6	actUIfFailed
7	normalMasterPowerAbnormalStandbyPowerAbnormal
8	normalMasterPowerNormalStandbyPowerAbnormal
9	normalMasterPowerAbNormalStandbyPowerNormal
10	normalMasterPowerNormalStandbyPowerNormal
11	singleTestingOutTime
12	singleTestingFailure
13	outtime
14	dslReportFailure
15	notTesting
16	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.13.1.2

hwPstnSignalToneTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.14 · 1 row entry · 9 columns

Open in standard view

Operation table for the PSTN signal tone test:
It realizes the function of the PSTN signal tone test in the system. This test helps check whether the dial tone and the dial tone delay function.
The index of this table is ifIndex

hwPstnSignalToneTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.14.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwPstnSignalToneTestOprType

Operation type.
Options:
1. dialtone(1) -indicates Dial tone test
2. dailtoneDelay(2) -indicates Dial tone delay test
3. specialdailtone(3) -indicates Special Dial tone test
4. stopTest(4) -i…

Enumerationr/w

Enumerated Values:

-1	invalidValue
1	dialtone
2	dailtoneDelay
3	specialdailtone
4	stopTest
5	ringbacktone
6	busytone

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.1

hwPstnSignalToneTestBusyFlag

Signal tone test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busystrentest(2) -indicates forced test when busy
3. invalidvalue(-1) -indicates Invalid value

Enumerationr/w

Enumerated Values:

-1	invalidvalue
1	busynotest
2	busystrentest

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.2

hwPstnSignalToneTestResult

Operation result.
Options:
1. signaltoneNormal(1) -indicates Signal tone normal
2. noSignaltone(2) -indicates No signal tone
3. signaltoneAbnormal(3) -indicates Signal tone abnormal
4. unknownError(4) …

Enumeration

Enumerated Values:

1	signaltoneNormal
2	noSignaltone
3	signaltoneAbnormal
4	unknownError
5	testingAbnormal
6	broadbandtesting
7	capturefail
8	notratb
9	notone
10	testnotfinish

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.3

hwPstnSignalToneTestDTDelayTime

Dial tone delay.
Unit: millisecond

Integer32

Constraints:
range: -1-65535

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.4

hwPstnSignalTonePlayTime

Tone play time.
Default: 10
Unit: second

Integer32r/w

Constraints:
range: -1--1
range: 5-30

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.5

hwPstnSignalToneActualDeferTime

Signal Actually Defer Timer.
Unit: millisecond

Integer32

Constraints:
range: -1-65535

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.6

hwPstnSignalToneTestMode

Test Mode.
Options:
1. outOfService(1) -Test port not need in service
2. inService(2) -Test port must be in servcie
3. invalidValue(-1) -Invalid value

Enumerationr/w

Enumerated Values:

-1	invalidValue
1	outOfService
2	inService

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.7

hwPstnSignalToneTestRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.8

hwPstnSignalToneTestDTStop

Detect stop dial tone.
Options:
1.yes(1) -Detected stop dial tone
2.no(2) -Not detected stop dial tone
3.invalidValue(-1) -Invalid value

Enumeration

Enumerated Values:

-1	invalidValue
1	yes
2	no

.1.3.6.1.4.1.2011.6.21.2.1.1.14.1.9

hwIsdnMeterTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.15 · 1 row entry · 3 columns

Open in standard view

Operation table for the ISDN meter test:
It realizes the function of the ISDN meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such as the multimeter.
The index of this table is ifIndex

hwIsdnMeterTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.15.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwIsdnMeterTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.15.1.1

hwIsdnMeterTestItem

Test item.
Options:
1. inline(1) -indicates Circuit test
2. outline(2) -indicates Loop-line test

Enumerationr/w

Enumerated Values:

1	inline
2	outline

.1.3.6.1.4.1.2011.6.21.2.1.1.15.1.2

hwIsdnMeterTestStatus

Test status.
Options:
1. success(1) -indicates normal
2. fail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5. testingAbnormal(5) …

Enumeration

Enumerated Values:

1	success
2	fail
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.15.1.3

hwTestBusTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.16 · 1 row entry · 6 columns

Open in standard view

Test on the circuit/loop-line test bus:
It realizes the function of the test on the circuit/loop-line test bus. This test helps check whether the circuit/loop-line test bus is normal.
The index of this table is hwTestGroupNo

hwTestBusTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.16.1

Indexes

HUAWEI-COMMTEST-MIBhwTestGroupNo

Column Syntax OID

hwTestBusTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.1

hwTestBusTestBusType

Operation type.
Options:
1. inbus(1) -indicates Circuit test bus
2. outbus(2) -indicates Loop-line test bus

Enumerationr/w

Enumerated Values:

1	inbus
2	outbus

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.2

hwTestBusTestResult

Operation result.
Options:
1. testbusNormal(1) -indicates Normal
2. voltageAbnormal(2) -indicates Voltage abnormal
3. resistanceAbnormal(3) -indicates Resistance abnormal
4. capacitanceAbnormal(4) -indic…

Enumeration

Enumerated Values:

1	testbusNormal
2	voltageAbnormal
3	resistanceAbnormal
4	capacitanceAbnormal
5	testOutoftime
6	unknownError
7	testingAbnormal
8	broadbandtesting
9	capturefail
10	notratb

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.3

hwTestBusTestVoltage

Voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.4

hwTestBusTestResistance

Resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.5

hwTestBusTestCapacitance

Capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.16.1.6

hwFrameLooplineAdjustOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.17 · 1 row entry · 13 columns

Open in standard view

The loop line test for get check value.
The index of this table is hwFrameIndex

hwFrameLooplineAdjustOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.17.1

The loop line test for get check value.
The index of this entry is hwFrameIndex

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex

Column Syntax OID

hwFrameLooplineAdjustCutlineSlotID

Slot ID.
Range:0-63

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.1

hwFrameLooplineAdjustCutlinePortID

Port ID.
Range:0-63

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.2

hwFrameLooplineAdjustSelfMixedSlotID

Slot ID.
Range:0-63

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.3

hwFrameLooplineAdjustSelfMixedPortID

Port ID.
Range:0-63

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.4

hwFrameLooplineAdjustOprType

Operation type.
Options:
1. test(1) -indicates test
2. modify(2) -indicates modify the test
3. restore(3) -indicates return to normal

Enumerationr/w

Enumerated Values:

1	test
2	modify
3	restore

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.5

hwFrameLooplineAdjustResult

Operation result.
Options:
1: normal(1) -indicates Normal
2: outoftime(2) -indicates Timed-out
3: unknownError(3) -indicates Unknown error
4: notgetselfmixedvalue(4) -indicates Failed…

Enumeration

Enumerated Values:

1	normal
2	outoftime
3	unknownError
4	notgetselfmixedvalue
5	notgetcutlinevalue
6	notgetallvalue

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.6

hwFrameLooplineAdjustOprCab

A-B capacitance.
Unit: nF

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.7

hwFrameLooplineAdjustOprCag

A-Ground capacitance.
Unit: nF

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.8

hwFrameLooplineAdjustOprCbg

B-Ground capacitance.
Unit: nF

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.9

hwFrameLooplineAdjustOprRab

A-B resistance..
Unit: ohm

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.10

hwFrameLooplineAdjustFrameIndex

Frame index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.11

hwFrameLooplineAdjustRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.12

hwFrameLooplineAdjustBusyFlag

Whether test or not when port is busy.
Options:
1: cancel(1) -indicates notest
2: force(2) -indicates test
3: invalid(-1) -indicates invalid

Enumerationr/w

Enumerated Values:

-1	invalid
1	cancel
2	force

.1.3.6.1.4.1.2011.6.21.2.1.1.17.1.13

hwFrameLooplineAdjustTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.18 · 1 row entry · 5 columns

Open in standard view

GET table for the shelf calibration values:
It realizes the function of obtaining the shelf calibration values.
The index of this table is hwFrameIndex.

hwFrameLooplineAdjustEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.18.1

GET table for the shelf calibration values:
It realizes the function of obtaining the shelf calibration values.
The index of this entry is hwFrameIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex

Column Syntax OID

hwFrameLooplineAdjustFlag

Calibration value flag of the loop-line test.
Options:
1: nosetflag(1) -indicates No calibration value is set
2: capacitanceflag(2) -indicates The capacitance calibration value is set
3: resistanceflag(3) -in…

Enumeration

Enumerated Values:

1	nosetflag
2	capacitanceflag
3	resistanceflag
4	allsetflag

.1.3.6.1.4.1.2011.6.21.2.1.1.18.1.1

hwFrameLooplineAdjustCab

A-B capacitance

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.18.1.2

hwFrameLooplineAdjustCag

A-Ground capacitance

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.18.1.3

hwFrameLooplineAdjustCbg

B-Ground capacitance

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.18.1.4

hwFrameLooplineAdjustRab

A-B resistance

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.18.1.5

hwQosTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.20 · 1 row entry · 23 columns

Open in standard view

Table for the QoS test.
The index of this table is hwQosTestIndex.

hwQosTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.20.1

Table for the QoS test.
The index of this entry is hwQosTestIndex.

Indexes

hwQosTestIndex

Column Syntax OID

hwQosTestIndex

Index of the a test

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.1

hwQosTestGWAddr

IP address of the local gateway

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.2

hwQosTestPeerAddr

IP address of the peer gateway (or NAT, SAN)

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.3

hwQosTestDuration

Test duration. By default, the test duration is one hour.
Default:3600

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.4

hwQosTestTick

Report cycle. By default, the report cycle is 60s.
Default:60

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.5

hwQosTestRowStatus

Row status

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.6

hwQosTestInPkts

Test In Pkts

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.7

hwQosTestOutPkts

Test Out Pkts

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.8

hwQosTestInOctets

Test In Octets

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.9

hwQosTestOutOctets

Test Out Octets

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.10

hwQosTestInDropPkts

Test In Drop Pkts

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.11

hwQosTestStatsMaxDropPktsRate

Test Stats Max Drop Pkts Rate

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.12

hwQosTestStatsMaxDropPktsPort

Test Stats Max Drop Pkts Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.13

hwQosTestStatsMinDropPktsRate

Test Stats Min Drop Pkts Rate

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.14

hwQosTestStatsMinDropPktsPort

Test Stats Min Drop Pkts Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.15

hwQosTestStatsMaxDitherDelay

Test Stats Max Dither Delay

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.16

hwQosTestStatsMaxDitherPort

Test Stats Max Dither Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.17

hwQosTestStatsMinDitherDelay

Test Stats Min Dither Delay

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.18

hwQosTestStatsMinDitherPort

Test Stats Min Dither Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.19

hwQosTestStatsMaxLoopDelay

Test Stats Max Loop Delay

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.20

hwQosTestStatsMaxLoopPort

Test Stats Max Loop Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.21

hwQosTestStatsMinLoopDelay

Test Stats Min Loop Delay

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.22

hwQosTestStatsMinLoopPort

Test Stats Min Loop Port

OctetString

.1.3.6.1.4.1.2011.6.21.2.1.1.20.1.23

hwSDLMeterTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.24 · 1 row entry · 2 columns

Open in standard view

Operation table for the SDL meter test:
It realizes the function of the SDL meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such as the multimeter.
The index of this table is ifIndex.

hwSDLMeterTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.24.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwSDLMeterTestOprType

Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.24.1.1

hwSDLMeterTestStatus

Test status.
Options:
1. success(1) -indicates normal
2. fail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5. testingAbnormal(5) -i…

Enumeration

Enumerated Values:

1	success
2	fail
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.24.1.2

hwSDLDMMTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.25 · 1 row entry · 18 columns

Open in standard view

Operation table for the SDL DMM test: 
It realizes the function of the SDL DMM test in the system. 
In the test, the voltage, resistance, and capacitance of the 
loop line are tested to check for faults such as broken circuit,
short circuit, grounding and cross-connected line.
The index of this table is ifIndex

hwSDLDMMTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.25.1

Operation table for the SDL DMM test:
It realizes the function of the SDL DMM test in the system.
In the test, the voltage, resistance, and capacitance of the
loop line are tested to check for faults such as broken c…

Indexes

IF-MIBifIndex

Column Syntax OID

hwSDLDMMTestOprType

Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.1

hwSDLDMMTestVoltage

SDL DMM test-Voltage .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.2

hwSDLDMMTestResistance

SDL DMM test-Resistance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.3

hwSDLDMMTestCapacitance

SDL DMM test-Capacitance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.4

hwSDLDMMTestStatus

Test status.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. portbusy(3) -indicates Busy port
4. outoftime(4) -indicates Timed-out
5. testingAbnormal(5…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	portbusy
4	outoftime
5	testingAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.5

hwSDLDMMTestConclusion

Conclusion.
Options:
1. normal(1) -indicates Normal
2. powerline(2) -indicates Contact of power lines
3. amix(3) -indicates A line mixed with others
4. bmix(4) …

Enumeration

Enumerated Values:

1	normal
2	powerline
3	amix
4	bmix
5	abmix
6	agrnd
7	bgrnd
8	abgrnd
9	selfmix
10	abpoorinsulation
11	agleak
12	bgleak
13	abgleak
14	abgleak
15	nomodem
16	unknown
50	abgrndorshortlinenoonu
51	onunotexist
52	normalwithonu
53	abmixnoonu
54	singlegndnoonu
55	singlegndwithonu
56	singlecutoff

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.6

hwSDLDMMTestACAG

A->ground AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.7

hwSDLDMMTestACBG

B->ground AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.8

hwSDLDMMTestACAB

A->B AC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.9

hwSDLDMMTestDCAG

A->ground DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.10

hwSDLDMMTestDCBG

B->ground DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.11

hwSDLDMMTestDCAB

A->B DC voltage.
Unit: millivolt, ab. mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.12

hwSDLDMMTestRAG

A->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.13

hwSDLDMMTestRBG

B->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.14

hwSDLDMMTestRAB

A->B insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.15

hwSDLDMMTestCapAG

A->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.16

hwSDLDMMTestCapBG

B->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.17

hwSDLDMMTestCapAB

A->B capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.25.1.18

hwLoopLineToneOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.26 · 1 row entry · 4 columns

Open in standard view

Operation table for the loop-line tone test:
It realizes the function of the test on the circuit and loop-line signals.
The index of this table is ifIndex.

hwLoopLineToneOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.26.1

Operation table for the loop-line tone test:
It realizes the function of the test on the circuit and loop-line signals.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwLoopLineToneOprType

Operation type.
Options:
1. check(1) -indicates Detect the signal tone
2. send(2) -indicates Send the signal tone
3. stopsend(3) -indicates Stop sending the signal tone)

Enumerationr/w

Enumerated Values:

1	check
2	send
3	stopsend

.1.3.6.1.4.1.2011.6.21.2.1.1.26.1.1

hwLoopLineToneIntensity

Signal tone intensity.
Options:
1. fivedB(1) -indicates 5 dB
2. tendB(2) -indicates 10 dB
3. fifteendB(3) -indicates 15 dB

Enumerationr/w

Enumerated Values:

1	fivedB
2	tendB
3	fifteendB

.1.3.6.1.4.1.2011.6.21.2.1.1.26.1.2

hwLoopLineToneBusyFlag

Busy control flag.
Options:
1. busynotest(1) -indicates no test when busy
2. busystrentest(2) -indicates Forced test when busy

Enumerationr/w

Enumerated Values:

1	busynotest
2	busystrentest

.1.3.6.1.4.1.2011.6.21.2.1.1.26.1.3

hwLoopLineToneResult

Operation result.
Options:
1. succeed(1) -indicates successful
2. failed(2) -indicates failed

Enumeration

Enumerated Values:

1	succeed
2	failed

.1.3.6.1.4.1.2011.6.21.2.1.1.26.1.4

hwPotsSelfCircuitTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.27 · 1 row entry · 33 columns

Open in standard view

Operation table for the PSTN subscriber circuit test.
The index of this table is ifIndex.

hwPotsSelfCircuitTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.27.1

Operation table for the PSTN subscriber circuit test.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwPotsSelfCircuitTestOprType

Circuit test-Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.1

hwPotsSelfCircuitTestBusyProcFlag

Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentest(3) -indicates force to test when busy
4. deferredtest(4)…

Enumerationr/w

Enumerated Values:

1	busynotest
2	busytest
3	busystrentest
4	deferredtest

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.2

hwPotsSelfCircuitTestStatus

Circuit test-Test status.
Options:
1. normal(1) -indicates Normal
2. testfail(2) -indicates Abnormal
3. portbusy(3) -indicates Busy port
4. outoftime(4) -indicates Timed-out
5. testingAbnor…

Enumeration

Enumerated Values:

1	normal
2	testfail
3	portbusy
4	outoftime
5	testingAbnormal
6	testcanceled

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.3

hwPotsSelfCircuitTestVDDResult

Circuit test result-VDD result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.4

hwPotsSelfCircuitTestVBATLResult

Circuit test result-VBATL result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.5

hwPotsSelfCircuitTestVBATHResult

Circuit test result-VBATH result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.6

hwPotsSelfCircuitTestVBATRResult

Circuit test result-VBATR result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.7

hwPotsSelfCircuitTestLoopCurrentResult

Circuit test result-Loop current result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsup…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.8

hwPotsSelfCircuitTestFeedVResult

Circuit test result-Feeder voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsu…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.9

hwPotsSelfCircuitTestRingVResult

Circuit test result-Ring voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsuppo…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.10

hwPotsSelfCircuitTestRingFResult

Circuit test result-Ring frequency result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsup…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.11

hwPotsSelfCircuitTestVAGResult

Circuit test result-A->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is not…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.12

hwPotsSelfCircuitTestVBGResult

Circuit test result-B->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is no…

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.13

hwPotsSelfCircuitTestDeferredTime

deferred time
Unit: minute
this leaf node is valid only when the value of hwPotsSelfCircuitTestBusyProcFlag is deferredtest(4).
Default: 30(minute).

Integer32r/w

Constraints:
range: -1--1
range: 1-1440

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.14

hwPotsSelfCircuitTestTimeoutProc

timeout proc:
Options:
1. notest(1) -indicates when deferred time out, if the port is still busy, test will be canceled
2. test(2) -indicates when deferred time out, if the port is still busy, test will be preform…

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.15

hwPotsSelfCircuitTestFeedVValue

Circuit Test Result-Feeder voltage
Unit: millivolt, mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.16

hwPotsSelfCircuitTestRingVValue

Circuit Test Result-Ringing current voltage
Unit: millivolt, mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.17

hwPotsSelfCircuitTestLoopCurrentValue

Circuit Test Result-Loop current
Unit: millivolt, mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.18

hwPotsSelfCircuitTestLoopIfIndex

Port Index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.19

hwPotsSelfCircuitTestLoopRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.20

hwPotsSelfCircuitTestOnHookDetectResult

Circuit test OnHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.21

hwPotsSelfCircuitTestOffHookDetectResult

Circuit test OffHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.22

hwPotsSelfCircuitTestStopRingResult

Circuit test StopRing result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.23

hwPotsSelfCircuitTestVPoleResult

Circuit test VPole result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport

Enumeration

Enumerated Values:

1	normal
2	abnormal
3	notsupport

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.24

hwPotsSelfCircuitTestVBATLValue

Circuit Test VBATL Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.25

hwPotsSelfCircuitTestVBATHValue

Circuit Test VBATH Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.26

hwPotsSelfCircuitTestVBATRValue

Circuit Test VBATR Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.27

hwPotsSelfCircuitTestRingFValue

Circuit Test Ring Frequency Value
Unit: HZ

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.28

hwPotsSelfCircuitTestVAGValue

Circuit Test A->Ground Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.29

hwPotsSelfCircuitTestVBGValue

Circuit Test B->Ground Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.30

hwPotsSelfCircuitTestVABPoleValue

Circuit Test A->B Pole Voltage Value
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.31

hwPotsSelfCircuitTestABLCurrentValue

Circuit Test A->B Current Value
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.32

hwPotsSelfCircuitTestSLICTempValue

Circuit SLIC Temp Value
Unit: oC

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.33

hwPstnCallTestResultTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.29 · 1 row entry · 9 columns

Open in standard view

Table for the result of the query test
The index of this table is hwPstnCallTestResultIndex

hwPstnCallTestResultEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.29.1

Table for the result of the query test
The index of this entry is hwPstnCallTestResultIndex

Indexes

hwPstnCallTestResultIndex

Column	Syntax	OID
hwPstnCallTestResultIndex Index. Range: 0-8000	Integer32 Constraints: `range: 0-8000`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.1`
hwPstnCallTestResultSerialNo Serial number of the test	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.2`
hwPstnCallTestResultFrameid ID of the shelf where the tested port is located	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.3`
hwPstnCallTestResultSlotid ID of the slot where the tested port is located	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.4`
hwPstnCallTestResultPortid ID of the tested port	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.5`
hwPstnCallTestResult Test result: 1. Normal 2. No dial tone 3. The called telephone does not ring 4. The voice circuit cannot get through 5. TSS is abnormal 6. The tested port is not correctly configured 7. The port is faulty 8. Ski…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.6`
hwPstnCallTestResultIfId Interface ID	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.7`
hwPstnCallTestResultCallerId Caller ID	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.8`
hwPstnCallTestResultTelNo Telephone number of the tested port	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.2011.6.21.2.1.1.29.1.9`

hw112UserInDialTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.30 · 1 row entry · 3 columns

Open in standard view

This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls.
The index of this table is ifIndex.

hw112UserInDialTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.30.1

This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column Syntax OID

hw112UserInDialTestOprType

Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
The 112 protocol does not define the stop command.

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.30.1.1

hw112UserInDialTestTime

Test duration
Unit: second

Integer32r/w

Constraints:
range: 1-5

.1.3.6.1.4.1.2011.6.21.2.1.1.30.1.2

hw112UserInDialTestResult

Operation result.
Options:
1. over(1) -indicates Success

Enumeration

Enumerated Values:

over

.1.3.6.1.4.1.2011.6.21.2.1.1.30.1.3

hwISDNDiagnoseTestTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.31 · 1 row entry · 11 columns

Open in standard view

User fault test table.
The index of this table is ifIndex.

hwISDNDiagnoseTestEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.31.1

User fault test table.
The index of this entry is ifIndex.

Indexes

hwISDNDiagnoseTestPortIndex

Column Syntax OID

hwISDNDiagnoseTestPortIndex

Port index

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.1

hwISDNDiagnoseTestOprType

Test operation .
Options:
1. start(1) -indicates start the test
2. stop(2) -indicates stop the test

Enumerationr/w

Enumerated Values:

1	start
2	stop

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.2

hwISDNDiagnoseTestType

Test type.
Options:
1. routinetest(1) -indicates routine test needs the port must be IS state, it only supports immediate test mode;
2. diagnosestest(2) -indicates diagnoses test needs the port must be OOS state, and…

Enumerationr/w

Enumerated Values:

1	routinetest
2	diagnosestest

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.3

hwISDNDiagnoseTestItemType

Test item.
Options:
1. lineActiveTest(1) -indicates line active test
2. lineActiveAndCRCSendTest(2) -indicates line active test and CRC send test

Enumerationr/w

Enumerated Values:

1	lineActiveTest
2	lineActiveAndCRCSendTest

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.4

hwISDNDiagnoseTestResult

Test Result.
Options:
1. activeok(1) -indicates line active ok
2. selfcheckfault(2) -indicates board selfcheck fault
3. loopback1operfault(3) -indicates loopback1 operation fault
4.…

Enumeration

Enumerated Values:

1	activeok
2	selfcheckfault
3	loopback1operfault
4	loopback1cancelfault
5	loopback1crccheckfault
6	activent1fault
7	nt1crccheckfault
8	ufaultloopback0succ
9	loopback2operfault
10	loopbackcancelfault
11	loopback2crccheckfault
12	noterminal
13	timeout
14	userstopsucc
15	exceptstop
16	nt1fault
17	testcanceled

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.5

hwISDNDiagnoseTestCRCErrNum

Indicates the CRC error's number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.6

hwISDNDiagnoseTestDeferredTestFlag

deferred test flag.
Options:
1. immediatetest(1) -indicates immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, the test operation
…

Enumerationr/w

Enumerated Values:

1	immediatetest
2	deferredtest

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.7

hwISDNDiagnoseTestDeferredTime

Deferred time(Unit: minute):
this leaf node is valid only when the value of hwISDNDiagnoseTestDeferredTestFlag is deferredtest(2).
Range: 1-1440
Default: 30(minute)

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.8

hwISDNDiagnoseTestTimeoutProc

timeout proc:
Options:
1. notest(1) -when deferred time out, if the port is still in service, line diagnose test will be canceled;
2. test(2) -when deferred time out, if the port is still in service, line diagnose t…

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.9

hwISDNDiagnoseTestCrcDetectPeriod

The CRC Check Period in Test.
Unit:second
Range:10-86400

Integer32r/w

Constraints:
range: 10-86400

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.10

hwISDNDiagnoseTestRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.31.1.11

hwPstnCallEmulateOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.32 · 1 row entry · 10 columns

Open in standard view

Operation table for the PSTN call emulation test (called party). It realizes the
function of the PSTN call emulation test (called party). This test helps check whether a subscriber port can
make calls normally as a called party.
The index of this table is hwPstnCallEmulateIndex

hwPstnCallEmulateOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.32.1

Indexes

hwPstnCallEmulateIndex

Column Syntax OID

hwPstnCallEmulateIndex

Call emulation index

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.1

hwPstnCallEmulateOprType

Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.2

hwPstnCallEmulateCallerIfindex

Calling port of the call emulation test

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.3

hwPstnCallEmulateCalledIfindex

Called port of the call emulation test

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.4

hwPstnCallEmulateCalledTelNo

Called telephone number (max length: 32)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.5

hwPstnCallEmulateTestStatus

Test Status.
Options:
1. nodialtone(1) -indicates No dial tone
2. dialfailed(2) -indicates Dialup fails
3. callednumbernotmatch(3) -indicates The called number does not match
4. callednotpickuppho…

Enumeration

Enumerated Values:

1	nodialtone
2	dialfailed
3	callednumbernotmatch
4	callednotpickupphone
5	testOK
6	testfailed

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.6

hwPstnCallEmulateTestResult

Emulational Call Test Result
Options:
1. callerNoDialTone(1) -indicates the caller does not have dial tone
2. callerNoDial(2) -indicates the caller does not dial
3. telNumNoMatch(3) …

Enumeration

Enumerated Values:

1	callerNoDialTone
2	callerNoDial
3	telNumNoMatch
4	callerRelease
5	testSucceed
6	callRelease
7	calledRelease
8	callerMatchNoCompleted
9	callerSendNoCompleted
10	calledMatchNoCompleted
11	calledSendNoCompleted
12	callerOffHookingBusy
13	callerDialogingBusy
14	callerMatchFailed
15	calledMatchFailed
16	callerPortAbnormal
17	calledPortAbnormal

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.7

hwPstnCallEmulateTestCallerDTMFDetected

Emulational Call Test Caller Detected Dtmf Num List

OctetString

Constraints:
range: 64-64

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.8

hwPstnCallEmulateTestCalleeDTMFDetected

Emulational Call Test Callee Detected Dtmf Num List

OctetString

Constraints:
range: 64-64

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.9

hwPstnCallEmulateTestRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.32.1.10

hwPstnLoopTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.33 · 1 row entry · 8 columns

Open in standard view

Loop test table
The index of this table is hwPstnLoopTestSerialNo

hwPstnLoopTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.33.1

Loop test table
The index of this entry is hwPstnLoopTestSerialNo

Indexes

hwPstnLoopTestSerialNo

Column Syntax OID

hwPstnLoopTestSerialNo

Test serial number

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.1

hwPstnLoopTestDestIfIndex

Target port ID

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.2

hwPstnLoopTestAssistIfIndex

Assistant port ID

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.3

hwPstnLoopTestOprType

Operation type.
Options:
1. start(1) -indicates start the test
2. stop(2) -indicates stop the test

Enumerationr/w

Enumerated Values:

1	start
2	stop

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.4

hwPstnLoopTestResult

Test status:
1. Succeed; 2. Offhook on the target subscriber port fails; 3. Offhook on the assistant subscriber port fails; 4. Onhook on the target subscriber port fails; 5. Onhook on the assistant subscriber port fails…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5

hwPstnLoopTestMode

Test mode
Options:
1. hardwaretest(1) -indicates it is a hardware test
2. systemtest(2) -indicates it is a systen test

Enumerationr/w

Enumerated Values:

1	hardwaretest
2	systemtest

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.6

hwPstnLoopTestDestTelNo

Telephone number of the target port (the maximum length is 16)

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.7

hwPstnLoopTestRequestID

Request ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.8

hwLineTestParaTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.35 · 1 row entry · 8 columns

Open in standard view

pots test para config table
The index of this table is hwLineTestParaFrameIndex and hwLineTestParaSlotIndex

hwLineTestParaEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.35.1

pots test para config table
The index of this entry is hwLineTestParaFrameIndex and hwLineTestParaSlotIndex

Indexes

hwLineTestParaFrameIndex hwLineTestParaSlotIndex

Column Syntax OID

hwLineTestParaOprType

The operation type of Test para config.
Options:
1. configure(1) -configure the value of physical layer test para
2. restore(2) -restore the value of physical layer test para
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	configure
2	restore

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.1

hwLineTestParaFrameIndex

Indicates the frameID of configuring test para.
Range: 0-255|-1

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.2

hwLineTestParaSlotIndex

Indicates the slotID of configuring test para.
Range: 0-255|-1

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.3

hwLineTestParaPv

Indicates the peak line test voltage of permitted sending.
Range: 0-100000|-1
Default: 50000
Unit: mV

Integer32r/w

Constraints:
range: -1-100000

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.4

hwLineTestParaAcF

Indicates the AC signal frequency when testing the capacitance and catheter.
Range: 10-1000|-1
Default: 25
Unit: Hz

Integer32r/w

Constraints:
range: -1--1
range: 10-1000

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.5

hwLineTestParaPitF

Indicates the frequency of line test voice.
Range: 300-3400|-1
Default: 800
Unit: Hz

Integer32r/w

Constraints:
range: -1--1
range: 300-3400

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.6

hwLineTestParaMaxfeScv

Indicates the max voltage of Signature test.
Range: 0-50000|-1
Default: 50000
Unit: mV
Step: 1000

Integer32r/w

Constraints:
range: -1-50000

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.7

hwLineTestParaMinfeScv

Indicates the min voltage of Signature test.
Range: 0-50000|-1
Default: 3000
Unit: mV
Step: 1000

Integer32r/w

Constraints:
range: -1-50000

.1.3.6.1.4.1.2011.6.21.2.1.1.35.1.8

hwMonitorTestOprTable

table

.1.3.6.1.4.1.2011.6.21.2.1.1.36 · 1 row entry · 6 columns

Open in standard view

monitor test table
The index of this table is ifIndex

hwMonitorTestOprEntry entry .1.3.6.1.4.1.2011.6.21.2.1.1.36.1

monitor test table
The index of this entry is ifIndex

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwMonitorTestAGV Monitor test A->ground voltage. Unit: millivolt, mV	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.1`
hwMonitorTestBGV Monitor test B->ground voltage. Unit: millivolt, mV	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.2`
hwMonitorTestLongitudinalCurrent Monitor test Longitudinal Current. Unit: uA	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.3`
hwMonitorTestTransversalCurrent Monitor test Transversal Current. Unit: uA	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.4`
hwMonitorTestBatteryVoltage Monitor test Battery Voltage. Unit: millivolt, mV	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.5`
hwMonitorTestSLICTemperature Monitor test SLIC Temperature. Unit: oC	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.2.1.1.36.1.6`