hwPstnLoopTestResult

HUAWEI-NTEST-MIB · .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5

Object

column SNMPv2-SMIInteger32
Test status:
1. Succeed; 2. Offhook on the target subscriber port fails; 3. Offhook on the assistant subscriber port fails; 4. Onhook on the target subscriber port fails; 5. Onhook on the assistant subscriber port fails;
6. Ringing on the target subscriber port fails; 7. Stopping ringing on the target subscriber port fails; 8. Channel test 1 fails. The target subscriber port transmits the DTMF signal to the TDM side. The assistant subscriber port does not detect any corresponding DTMF signal;
9. Channel test 2 fails. The assistant subscriber port transmits the DTMF signal to the TDM side. The target subscriber port does not detect any corresponding DTMF signal; 10. Channel test 3 fails. The target subscriber port transmits the DTMF signal to the IP side. The target subscriber port does not detect any corresponding DTMF signal on the TDM side; 11. Channel 4 test 4 fails. The assistant subscriber port transmits the DTMF signal to the IP side. The assistant subscriber port does not detect any corresponding DTMF signal on the TDM side;
12. Waiting for the dialing tone on the assistant subscriber port fails; 13. Waiting for the ringing on the target subscriber port fails; 14. The system fails due to abnormity; 15. The test stops because the tested subscriber port is busy;
16. The test stops because the user of the tested subscriber port hooks off; 17. The voice channel test fails because of insufficient DSP resources; 18. The DSP network function test fails (the turn around function is enabled); 19. The DSP network function test fails; 20. The codec loopback is successful, the SLIC loopback fails, and the SLIC chip is faulty; 21. The TDM loopback is successful, the codec loopback and SLIC loopback fail, and the codec chip, the SLIC chip, or the HighWay bus is faulty;
22. The DSP is faulty and the DSP TDM loopback fails; 23. The codec loopback fails and the codec chip is faulty.

Context

MIB
HUAWEI-NTEST-MIB
OID
.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5
Type
column
Access
readonly
Status
current
Parent
hwPstnLoopTestOprEntry
Table
hwPstnLoopTestOprTable
Siblings
7

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects