hwPotsSelfCircuitTestDeferredTime
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.14
Object
column
r/w
Integer32
deferred time Unit: minute this leaf node is valid only when the value of hwPotsSelfCircuitTestBusyProcFlag is deferredtest(4). Default: 30(minute).
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.27.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPotsSelfCircuitTestOprEntry
- Table
- hwPotsSelfCircuitTestOprTable
- Siblings
- 32
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 1-1440
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPotsSelfCircuitTestOprType Circuit test-Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.1 |
| hwPotsSelfCircuitTestRingVResult Circuit test result-Ring voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3)… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.10 |
| hwPotsSelfCircuitTestRingFResult Circuit test result-Ring frequency result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.11 |
| hwPotsSelfCircuitTestVAGResult Circuit test result-A->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsuppo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.12 |
| hwPotsSelfCircuitTestVBGResult Circuit test result-B->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupp… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.13 |
| hwPotsSelfCircuitTestTimeoutProc timeout proc:
Options:
1. notest(1) -indicates when deferred time out, if the port is still busy, test will be canceled
2. test(2) -indicates when deferred time out, if the … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.15 |
| hwPotsSelfCircuitTestFeedVValue Circuit Test Result-Feeder voltage
Unit: millivolt, mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.16 |
| hwPotsSelfCircuitTestRingVValue Circuit Test Result-Ringing current voltage
Unit: millivolt, mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.17 |
| hwPotsSelfCircuitTestLoopCurrentValue Circuit Test Result-Loop current
Unit: millivolt, mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.18 |
| hwPotsSelfCircuitTestLoopIfIndex Port Index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.19 |
| hwPotsSelfCircuitTestBusyProcFlag Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentest(3) -indicates forc… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.2 |
| hwPotsSelfCircuitTestLoopRequestID Request ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.20 |
| hwPotsSelfCircuitTestOnHookDetectResult Circuit test OnHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.21 |
| hwPotsSelfCircuitTestOffHookDetectResult Circuit test OffHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -in… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.22 |
| hwPotsSelfCircuitTestStopRingResult Circuit test StopRing result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicat… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.23 |
| hwPotsSelfCircuitTestVPoleResult Circuit test VPole result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.24 |
| hwPotsSelfCircuitTestVBATLValue Circuit Test VBATL Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.25 |
| hwPotsSelfCircuitTestVBATHValue Circuit Test VBATH Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.26 |
| hwPotsSelfCircuitTestVBATRValue Circuit Test VBATR Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.27 |
| hwPotsSelfCircuitTestRingFValue Circuit Test Ring Frequency Value
Unit: HZ | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.28 |
| hwPotsSelfCircuitTestVAGValue Circuit Test A->Ground Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.29 |
| hwPotsSelfCircuitTestStatus Circuit test-Test status.
Options:
1. normal(1) -indicates Normal
2. testfail(2) -indicates Abnormal
3. portbusy(3) -indicates Busy port
4. outoftime(4) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.3 |
| hwPotsSelfCircuitTestVBGValue Circuit Test B->Ground Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.30 |
| hwPotsSelfCircuitTestVABPoleValue Circuit Test A->B Pole Voltage Value
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.31 |
| hwPotsSelfCircuitTestABLCurrentValue Circuit Test A->B Current Value
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.32 |
| hwPotsSelfCircuitTestSLICTempValue Circuit SLIC Temp Value
Unit: oC | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.33 |
| hwPotsSelfCircuitTestVDDResult Circuit test result-VDD result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -ind… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.4 |
| hwPotsSelfCircuitTestVBATLResult Circuit test result-VBATL result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.5 |
| hwPotsSelfCircuitTestVBATHResult Circuit test result-VBATH result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -ind… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.6 |
| hwPotsSelfCircuitTestVBATRResult Circuit test result-VBATR result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -ind… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.7 |
| hwPotsSelfCircuitTestLoopCurrentResult Circuit test result-Loop current result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.8 |
| hwPotsSelfCircuitTestFeedVResult Circuit test result-Feeder voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.9 |