hwPstnCircuitTestStatus
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17
Object
column
Enumeration
Describes the Circuit test-Inline Test Status. Options: 1. normal(1) -indicates normal 2. testfail(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -indicates timed-out 5. testingAbnormal(5) -indicates test abnormal 6. broadbandtesting(6) -indicates broadband testing 7. capturefail(7) -indicates line capture failure 8. notratb(8) -indicates relay transfer board not exist
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwPstnCircuitTestOprEntry
- Table
- hwPstnCircuitTestOprTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | testfail |
3 | portbusy |
4 | outoftime |
5 | testingAbnormal |
6 | broadbandtesting |
7 | capturefail |
8 | notratb |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPstnCircuitTestOprType Describes the Circuit test-Operation Type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.1 |
| hwPstnCircuitTestPoleDetect Describes the Circuit test-Polarity reversal.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.10 |
| hwPstnCircuitTestOnHook Describes the Circuit test-On hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.11 |
| hwPstnCircuitTestRing Describes the Circuit test-Ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.12 |
| hwPstnCircuitTestStopRing Describes the Circuit test-Stop ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.13 |
| hwPstnCircuitTestFeedV Describes the Circuit test-Feeder voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.14 |
| hwPstnCircuitTestRingV Describes the Circuit test-Ringing current voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.15 |
| hwPstnCircuitTestBusyProcFlag Describes the Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.16 |
| hwPstnCircuitTestOffHookResult Describes the Circuit Test Result-Off hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.18 |
| hwPstnCircuitTestDialToneResult Describes the Circuit Test Result-dial tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.19 |
| hwPstnCircuitTestOffHook Describes the Circuit test-Off hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.2 |
| hwPstnCircuitTestReceivePulseResult Describes the Circuit Test Result-Receiving pulse.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.20 |
| hwPstnCircuitTestReceiveDTMFResult Describes the Circuit Test Result-Receiving DTMF.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.21 |
| hwPstnCircuitTestRingBackResult Describes the Circuit Test Result-Ring back tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.22 |
| hwPstnCircuitTestBusyToneResult Describes the Circuit Test Result-Busy tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.23 |
| hwPstnCircuitTestBatteryFeedResult Describes the Circuit Test Result-Feeder.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -in… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.24 |
| hwPstnCircuitTestPoleDetectResult Describes the Circuit Test Result-Polarity reversal.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testoutti… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.25 |
| hwPstnCircuitTestOnHookResult Describes the Circuit Test Result-On hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.26 |
| hwPstnCircuitTestRingResult Describes the Circuit Test Result-Ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.27 |
| hwPstnCircuitTestStopRingResult Describes the Circuit Test Result-Stop ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3)… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.28 |
| hwPstnCircuitTestFeedVValue Describes the Circuit Test Result-Feeder voltage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.29 |
| hwPstnCircuitTestOffHookCount Circuit test-Off hook count | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.3 |
| hwPstnCircuitTestFeedVResult Describes the Circuit Test Result-Feeder voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.30 |
| hwPstnCircuitTestRingVValue Describes the Circuit Test Result-Ringing current voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.31 |
| hwPstnCircuitTestRingVResult Describes the Circuit Test Result-Ringing current voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.32 |
| hwPstnCircuitTestLoopCurrentValue Describes the Circuit Test Result-Loop current.
Unit: microampere, ab. uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.33 |
| hwPstnCircuitTestLoopCurrentResult Describes the Circuit Test Result-Loop current Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.34 |
| hwPstnCircuitTestDialTone Describes the Circuit test-Dial tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.4 |
| hwPstnCircuitTestReceivePulse Describes the Circuit test-Receiving pulse.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.5 |
| hwPstnCircuitTestReceiveDTMF Describes the Circuit test-Receiving DTMF.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.6 |
| hwPstnCircuitTestRingBackTone Describes the Circuit test-Ring back tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.7 |
| hwPstnCircuitTestBusyTone Describes the Circuit test-Busy tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.8 |
| hwPstnCircuitTestBatteryFeed Describes the Circuit test-Feeder .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.9 |