hw112IsdnDiagnoseTestLoopChannel
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3
Object
column
r/w
Enumeration
Loopback . Options: 1. bOne(1) -indicates B1 2. bTwo(2) -indicates B2 3. twoBAndD(3) -indicates 2B+D 4. pra(4) -indicates PRA
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hw112IsdnDiagnoseTestOprEntry
- Table
- hw112IsdnDiagnoseTestOprTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bOne |
2 | bTwo |
3 | twoBAndD |
4 | pra |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw112IsdnDiagnoseTestOprType Operation type .
Options:
1. start(1) -start the test
2. stop(2) -stop the test
Note:The 112 protocol does not define the stop command. | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.1 |
| hw112IsdnDiagnoseTestTimeoutProc Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Timeout proc:
1-when deferred time out, if the port is still in service, test will be canceled;
… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.10 |
| hw112IsdnDiagnoseTestIfIndex Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.11 |
| hw112IsdnDiagnoseTestRequestID Request ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.12 |
| hw112IsdnDiagnoseTestLoopType Loopback type.
Options:
1. nt1(1) -indicates NT1
2. ltet(2) -indicates LT/ET | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.2 |
| hw112IsdnDiagnoseTestResult Operation result.
Options:
1. success(1) -indicates loopback success, and user stop the test manually;
2. failure(2) -indicates loopback failure;
3. timeouts… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.4 |
| hw112IsdnDiagnoseTestLoopTime Loop time.
Unit: minute | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.5 |
| hw112IsdnDiagnoseTestLoopDirection Loop direction.
Options:
1. nearloop(1) -indicates loop direction is near loop
2. farloop(2) -indicates loop direction is far loop | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.6 |
| hw112IsdnDiagnoseTestLoopTs Time slot to be looped back | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.7 |
| hw112IsdnDiagnoseTestDeferredTestFlag deferred test flag:
Options:
1. immediatetest(1) -immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, t… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8 |
| hw112IsdnDiagnoseTestDeferredTime Deferred time(unit: minute):
this leaf node is valid only when the value of hw112IsdnDiagnoseTestDeferredTestFlag is deferredtest(2).
Default: 30(minute). | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.9 |