hwIsdnUserOutLineTestBusyProcFlag
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.5
Object
column
r/w
Enumeration
Busy control flag . Options: 1. busyNoTest(1) -indicates no test when busy 2. busyTest(2) -indicates remedy test when busy
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwIsdnUserOutLineTestOprEntry
- Table
- hwIsdnUserOutLineTestOprTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | busyNoTest |
2 | busyTest |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsdnUserOutLineTestOprType Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.1 |
| hwIsdnUserOutLineTestACAB A->B AC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.10 |
| hwIsdnUserOutLineTestDCAG A->ground DC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.11 |
| hwIsdnUserOutLineTestDCBG B->ground DC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.12 |
| hwIsdnUserOutLineTestDCAB A->B DC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.13 |
| hwIsdnUserOutLineTestRAG A->ground insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.14 |
| hwIsdnUserOutLineTestRBG B->ground insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.15 |
| hwIsdnUserOutLineTestRAB A->B insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.16 |
| hwIsdnUserOutLineTestCapAG A->ground capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.17 |
| hwIsdnUserOutLineTestCapBG B->ground capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.18 |
| hwIsdnUserOutLineTestCapAB A->B capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.19 |
| hwIsdnUserOutLineTestVoltage ISDN loop line test-Voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.2 |
| hwIsdnUserOutLineTestImpedance Loop-Line Test-Impedance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.20 |
| hwIsdnUserOutLineTestImpedanceAB A->B impedance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.21 |
| hwIsdnUserOutLineTestImpedanceBA B->A impedance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.22 |
| hwIsdnUserOutLineTestImpedanceAG A->ground impedance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.23 |
| hwIsdnUserOutLineTestImpedanceBG B->ground impedance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.24 |
| hwIsdnUserOutLineTestCurrent Loop line test-Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.25 |
| hwIsdnUserOutLineTestACCurrentAG A->ground AC current
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.26 |
| hwIsdnUserOutLineTestACCurrentBG B->ground AC current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.27 |
| hwIsdnUserOutLineTestACCurrentAB AB AC current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.28 |
| hwIsdnUserOutLineTestDCCurrentAG A->ground DC current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.29 |
| hwIsdnUserOutLineTestResistance ISDN loop line test-Resistance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.3 |
| hwIsdnUserOutLineTestDCCurrentBG B->ground DC current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.30 |
| hwIsdnUserOutLineTestDCCurrentAB AB DC current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.31 |
| hwIsdnUserOutLineTestLoopCurrent Loop-Line Test-Loop Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.32 |
| hwIsdnUserOutLineTestLC Loop Current.
Unit: mA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.33 |
| hwIsdnUserOutLineTestNoise Loop-Line Test-Noise .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.34 |
| hwIsdnUserOutLineTestN Noise.
Unit: dBm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.35 |
| hwIsdnUserOutLineTestCapacitance ISDN loop line test-Capacitance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.4 |
| hwIsdnUserOutLineTestStatus Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftim… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.6 |
| hwIsdnUserOutLineTestConclusion Conclusion
Range:1-89
(Enumerated type.
1: Normal 2: Contact with the power line 3: A line mixed with others 4: B line mixed with others
5: Mixed with others (two lines) 6: A li… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.7 |
| hwIsdnUserOutLineTestACAG A->ground AC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.8 |
| hwIsdnUserOutLineTestACBG B->ground AC voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.9 |