hw112IsdnDiagnoseTestDeferredTestFlag
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8
Object
column
r/w
Enumeration
deferred test flag:
Options:
1. immediatetest(1) -immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, the test operation
will be deferred. If the port changes to idle state before time out, the test will be executed
immediately. If the port keeps busy by the time out, the system will excecute a corresponding
operation according to what the user specified: canceling the test or forcing to test.
If the value of this leaf node is deferredtest(2), both hw112IsdnDiagnoseTestDeferredTime and
hw112IsdnDiagnoseTestTimeoutProc must be set.
Default: immediatetest(1).
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hw112IsdnDiagnoseTestOprEntry
- Table
- hw112IsdnDiagnoseTestOprTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | immediatetest |
2 | deferredtest |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw112IsdnDiagnoseTestOprType Operation type .
Options:
1. start(1) -start the test
2. stop(2) -stop the test
Note:The 112 protocol does not define the stop command. | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.1 |
| hw112IsdnDiagnoseTestTimeoutProc Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Timeout proc:
1-when deferred time out, if the port is still in service, test will be canceled;
… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.10 |
| hw112IsdnDiagnoseTestIfIndex Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.11 |
| hw112IsdnDiagnoseTestRequestID Request ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.12 |
| hw112IsdnDiagnoseTestLoopType Loopback type.
Options:
1. nt1(1) -indicates NT1
2. ltet(2) -indicates LT/ET | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.2 |
| hw112IsdnDiagnoseTestLoopChannel Loopback .
Options:
1. bOne(1) -indicates B1
2. bTwo(2) -indicates B2
3. twoBAndD(3) -indicates 2B+D
4. pra(4) -indicates PRA | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3 |
| hw112IsdnDiagnoseTestResult Operation result.
Options:
1. success(1) -indicates loopback success, and user stop the test manually;
2. failure(2) -indicates loopback failure;
3. timeouts… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.4 |
| hw112IsdnDiagnoseTestLoopTime Loop time.
Unit: minute | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.5 |
| hw112IsdnDiagnoseTestLoopDirection Loop direction.
Options:
1. nearloop(1) -indicates loop direction is near loop
2. farloop(2) -indicates loop direction is far loop | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.6 |
| hw112IsdnDiagnoseTestLoopTs Time slot to be looped back | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.7 |
| hw112IsdnDiagnoseTestDeferredTime Deferred time(unit: minute):
this leaf node is valid only when the value of hw112IsdnDiagnoseTestDeferredTestFlag is deferredtest(2).
Default: 30(minute). | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.9 |