hwIsdnUserOutTestActNT1Result
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.8
Object
column
Enumeration
Describes the Activation NT1 result . Options: 1. normal(1) -indicates Normal 2. activeFail(2) -indicates failure 3. noNt1OrNt1NotUse(3) -indicates no NT1 or NT1 is unavailable 4. activeUifSuccess(4) -indicates U port activated successfully 5. activeUifAndSifSuccess(5) -indicates U and S ports activated successfully 6. outOfTime(6) -indicates Timed-out 7. startTestFail(7) -indicates starting test fails
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.3.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwIsdnUserOutTestOprEntry
- Table
- hwIsdnUserOutTestOprTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | activeFail |
3 | noNt1OrNt1NotUse |
4 | activeUifSuccess |
5 | activeUifAndSifSuccess |
6 | outOfTime |
7 | startTestFail |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIsdnUserOutTestOprType Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.1 |
| hwIsdnUserOutTestTransBitErrorResult Describes the Test result-Transmission bit error rate.
Options:
1. normal(1) -indicates normal
2. nt1BadOrNoTexist(2) -indicates NT1 is bad or no NT1
3. nt1ActiveF… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.10 |
| hwIsdnUserOutTestTotalSend Describes the Total number of sent bits | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.11 |
| hwIsdnUserOutTestCodeErrorNumber Describes the Number of bit errors | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.12 |
| hwIsdnUserOutTestCodeErrorRate Describes the Bit error rate | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.13 |
| hwIsdnUserOutTestActiveNT1 Describes the ISDN loop line test-Activate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.2 |
| hwIsdnUserOutTestDeactiveNT1 Describes the ISDN loop line test-Deactivate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.3 |
| hwIsdnUserOutTestTransBitError Describes the ISDN loop line test-Transmission Bit Error Rate.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.4 |
| hwIsdnUserOutTestErrCodeTestTime Describes the Bit Error Rate Test Duration.
Unit: s.
Default: 120 s for the EMS | column | Integer32 | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.5 |
| hwIsdnUserOutTestBusyProcessFlag Describes the Busy control flag.
Options:
1. busyNoTest(1) -indicates no test when busy
2. busyTest(2) -indicates remedy test when busy | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.6 |
| hwIsdnUserOutTestStatus Describes the Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.7 |
| hwIsdnUserOutTestDeactNT1Result Describes the Test result-Deactivate NT1.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outoftime(3) -indicates timed… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.9 |