hostsInfoTable

table

.1.3.6.1.4.1.1966.12.1.3.1 · 1 row entry · 5 columns

Open in standard view

The hosts info table.

hostsInfoEntry entry .1.3.6.1.4.1.1966.12.1.3.1.1

An entry in the hostsInfoTable, each relating to a host.

Indexes

hostIndex

Column	Syntax	OID
hostIndex The table entry number for this host.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.3.1.1.1
hostStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.3.1.1.2
hostName The host name used for this host entry. To delete an entry, blank out this field. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.3.1.1.3
hostIpAddr The host IP address used for this entry.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.3.1.1.4
fqdn The host full qualified domain name for the host entry. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.3.1.1.5

userTable

table

.1.3.6.1.4.1.1966.12.1.4.1 · 1 row entry · 27 columns

Open in standard view

The user table.

userEntry entry .1.3.6.1.4.1.1966.12.1.4.1.1

An entry in the userEntry, each relating to a user.

Indexes

userIndex

Column	Syntax	OID
userIndex The table entry number for this user.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.4.1.1.1
userStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.4.1.1.2
userName The user name. To delete a user, set this field to blank. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.1966.12.1.4.1.1.3
userService The type of service that the user will use: dsprompt, telnet, ssh, rlogin, slip, ppp, tcpclear or sslraw.	Enumerationr/w Enumerated Values: 1 dsprompt 2 telnet 3 ssh 4 rlogin 5 slip 6 ppp 7 tcpclear 8 sslraw	.1.3.6.1.4.1.1966.12.1.4.1.1.4
userLanguage Sets the language the user will view all Menu, CLI, and WebManager strings.	Enumerationr/w Enumerated Values: 1 english 2 custom	.1.3.6.1.4.1.1966.12.1.4.1.1.5
userLevel Admin-Total access to the Device Server. More than one admin user account can exist, but we recommend that you only have one. Normal-Limited access to the Device Server. Limited CLI commands and Menu access, can configu…	Enumerationr/w Enumerated Values: 1 admin 2 normal 3 restricted 4 menu	.1.3.6.1.4.1.1966.12.1.4.1.1.6
userHotKeyPrefix The prefix that a user types to control the current session. The default value is hex 01, which corresponds to Ctrl-a (^a): ^a number-Switches from one session to another, press ^a and then the required session number. …	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.1.1.7
userPhoneNumber The phone number the Device Server will dial to callback the user (you must have set Callback to On). Enter the number without spaces.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.4.1.1.8
userCallBack When On, enter a phone number for the Device Server to call the user back (the Callback parameter is unrelated to the Line Dial parameter). Note: the Device Server will allow callback only when a user is authenticated. …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.1.1.9
userIdleTimer The amount of time, in seconds, that the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, because there has been no exchange of data within the specified time…	Integer32r/w Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.4.1.1.10
userSessionTimer The amount of time, in seconds, that the Session Timer will run. Use this timer to forcibly close a user's session (connection). When the Session Timer expires, the Device Server will end the connection. The default is …	Integer32r/w Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.4.1.1.11
userIpHost When the User Service is set to Telnet, TCP_clear or SSL_RAW, the target host IP address. If 255.255.255.255 is specified in the configuration, the user will be prompted for an IP address or host name. If no IP address …	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.4.1.1.12
userTelnetPort The TCP port number for the Telnet session.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.4.1.1.13
userSSHPort The TCP port number for the SSH session.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.4.1.1.14
userTcpClearPort The TCP port number for the TCP-Clear or SSL-Raw session.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.4.1.1.15
userFramedIp Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the address in dot decimal notation as follows: 255.255.255.254 (default)-The Device Server will use the Remote IP Address set in the P…	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.4.1.1.16
userSubnetBits (IPv4 only) If the remote user is on a subnet, enter the number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.4.1.1.17
userIpv6InterfaceIdentifier Used for User Service PPP, sets the IP address of the remote user. Enter the address in IPv6 format. The first 64 bits of the Interface Identifier must be zero, therefore, ::abcd:abcd:abcd:abcd is the expected format.	Ipv6InterfaceIdr/w Textual Convention: Ipv6InterfaceId OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.4.1.1.18
userFramedMtu Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes, being transferred across the link. On noisy links it might be preferable to fragment large packets being transferred over the link, sin…	Integer32r/w Constraints: range: 64-1500	.1.3.6.1.4.1.1966.12.1.4.1.1.19
userFramedCompression Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is used on the link. VJ compression is a means of reducing the standard TCP/IP header from 40 octets to approximately 5 octets. This gives a…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.1.1.20
userRouting Determines the routing mode used for RIP packets on the PPP and SLIP interfaces. Values are: None-RIP packets are neither received nor sent by the Device Server. Send-RIP packets can only be sent by the Device Server. L…	Enumerationr/w Enumerated Values: 1 none 2 send 3 listen 4 sendAndListen	.1.3.6.1.4.1.1966.12.1.4.1.1.21
userPortConnected Port user is currently connected to. -1 if user not connected	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.1966.12.1.4.1.1.22
userSessionTime Current User session time.	Integer32 Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.4.1.1.23
userIdleTime Current Idle time	Integer32 Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.4.1.1.24
userAllowAccessClusterPorts Allow/disallow the user to access to clustering ports.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.1.1.27
userHost The name of the host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.1.1.28
userTunnel The HTTP tunnel associated with the user's host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.1.1.29

portAccessTable

table

.1.3.6.1.4.1.1966.12.1.4.2 · 1 row entry · 6 columns

Open in standard view

The port access info table for user.

portAccessEntry entry .1.3.6.1.4.1.1966.12.1.4.2.1

An entry in the portAccessTable, each relating to a user's
access privileges for a serial port.

Indexes

portAccessUserIndex portAccessPortIndex

Column	Syntax	OID
portAccessUserIndex The index for the user entry that port access applies to.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.4.2.1.1
portAccessPortIndex The port number that user access applies to.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.4.2.1.2
portAccessStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.4.2.1.3
portRWAccessAllowed Enable or disable the user's read write access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.4.2.1.4
portRIAccessAllowed Enable or disable the user's read input access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.4.2.1.5
portROAccessAllowed Enable or disable the user's read output access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.4.2.1.6

userSessionTable

table

.1.3.6.1.4.1.1966.12.1.4.3 · 1 row entry · 43 columns

Open in standard view

user.

userSessionEntry entry .1.3.6.1.4.1.1966.12.1.4.3.1

An entry in the userEntry, each relating to a user.

Indexes

userSessionUserIndex userSessionNumber

Column	Syntax	OID
userSessionUserIndex The user number.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.4.3.1.1
userSessionNumber The session number.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.1966.12.1.4.3.1.2
userSessionStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.4.3.1.3
userSessionType The type of session for this session number for this user.	Enumerationr/w Enumerated Values: 1 none 2 telnet 3 rlogin 4 ssh	.1.3.6.1.4.1.1966.12.1.4.3.1.4
userSessionAuto Specify whether or not the session(s) will start automatically when the user logs into the Device Server.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.5
userSessionTelnetPort For Telnet sessions, the TCP port number the target host is listening on for incoming connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.4.3.1.6
userSessionTelnetHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.7
userSessionTelnetTermType Type of terminal attached to this line; for example, ANSI or WYSE60.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.8
userSessionTelnetEcho Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient for entering text that should not be displayed on the scree…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.9
userSessionTelnetMapnl Maps carriage returns (CR) to carriage return line feed (CRLF). Default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.10
userSessionTelnetMode When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.11
userSessionTelnetInterrupt Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII value ^C).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.12
userSessionTelnetQuit Defines the quit character. Typing the quit character closes and exits the current Telnet session. This value is in hexadecimal with a default value of 1c (ASCII value FS).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.13
userSessionTelnetEOF Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. This value is in hexadecimal with a default value of 4 (ASCII …	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.14
userSessionTelnetErase Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (ASCII value ^H).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.15
userSessionTelnetEchoCC Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is in hexadecimal with a default value of 5 (ASCII value ^E).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.16
userSessionTelnetBreak Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.4.3.1.17
userSessionSSHPort The target host TCP port number.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.4.3.1.18
userSessionSSHHost The host that the user will automatically connect to via SSH after a successful login.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.19
userSessionSSHTermType The type of terminal that will connecting via SSH.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.20
userSessionSSHVerbose Displays debug messages on the terminal.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.21
userSessionSSHCompression Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.22
userSessionSSHAutoLogin Creates an automatic SSH login, using the Name and Password values.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.23
userSessionSSHName The name of the user logging into the SSH session.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.4.3.1.24
userSessionSSHProtocol Specify the SSH client version that will be used for the SSH session.	Enumerationr/w Enumerated Values: 1 ssh1 2 ssh2 3 sshBoth	.1.3.6.1.4.1.1966.12.1.4.3.1.25
userSessionSSHRSA An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.26
userSessionSSHDSA An authentication method used by SSH version 2. Use DSA authentication for the SSH session.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.27
userSessionSSHKeyboard The user types in a password for authentication.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.28
userSessionSSHCipherSSH1 Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish	Enumerationr/w Enumerated Values: 1 tripledes 2 blowfish	.1.3.6.1.4.1.1966.12.1.4.3.1.29
userSessionSSHFirstSSH2Cipher Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305	Enumerationr/w Enumerated Values: 1 tripledes 2 blowfish 3 aes-cbc 4 cast 5 arcfour 6 aes-ctr 7 aes-gcm 8 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.30
userSessionSSHSecondSSH2Cipher Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.31
userSessionSSHThirdSSH2Cipher Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.32
userSessionSSHFourthSSH2Cipher Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.33
userSessionSSHFifthSSH2Cipher Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.34
userSessionRloginHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.35
userSessionRloginTermType Type of terminal attached to this line; for example, ansi or wyse60.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.36
userSessionTelnetTunnelName The name of the HTTP tunnel associated with the Telnet service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.37
userSessionSSHTunnelName The name of the HTTP tunnel associated with the SSH service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.38
userSessionRloginTunnelName The name of the HTTP tunnel associated with the Rlogin service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.4.3.1.39
userSessionStrictHostKeyChecking When set, the device server must have a host key loaded.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.4.3.1.40
userSessionSSHSixthSSH2Cipher Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.41
userSessionSSHSeventhSSH2Cipher Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-P…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.42
userSessionSSHEighthSSH2Cipher Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.4.3.1.43

portTable

table

.1.3.6.1.4.1.1966.12.1.5.1 · 1 row entry · 39 columns

Open in standard view

The port configuration table.

portEntry entry .1.3.6.1.4.1.1966.12.1.5.1.1

An entry in the port configuration table, each relating to a serial port.

Indexes

portIndex

Column	Syntax	OID
portIndex Serial Port Index. Valid values are 1 to maximum port number the Device Server supports	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.1.1.1
portStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.1.1.2
portName Provide a name for the line so it can be easily identified.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.1966.12.1.5.1.1.3
portService Defines the Line Service, which determines how the line will be used. USB ports can only be configured to reverseraw(4),reversessh(11),,reversetelnet(8), bidirectionalmodem(5), trueport(25),customapp(23)	Enumerationr/w Enumerated Values: 1 dslogin 2 directraw 3 silentraw 4 reverseraw 5 bidirectionalmodem 6 directtelnet 7 silenttelnet 8 reversetelnet 9 directssh 10 silentssh 11 reversessh 12 directrlogin 13 silentrlogin 14 slip 15 ppp 16 printer 17 udp 18 vmodem 19 clienttunnel 20 servertunnel 21 modbusslave 22 modbusmaster 23 customapp 24 signalIo 25 trueport 26 powermanagement	.1.3.6.1.4.1.1966.12.1.5.1.1.4
portDial Determines how a modem will work on the line. If your user is remote and will be dialing in via modem or ISDN TA, set this parameter to In; if the Device Server is being used as a router, set this parameter to either In…	Enumerationr/w Enumerated Values: 1 none 2 in 3 out 4 both	.1.3.6.1.4.1.1966.12.1.5.1.1.5
portModem The name of the predefined modem that is used on this line.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.5.1.1.6
portPhone The phone number to use when Dial is set to Out.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.5.1.1.7
portTermType Specifies the type of terminal connected to the line: Dumb, WYSE60, VT100, ANSI, TVI925, IBM3151TE, VT320 (specifically supporting VT320-7), HP700 (specifically supporting HP700/44), Term1, Term2, Term3 (user defined te…	Enumerationr/w Enumerated Values: 1 wyse60 2 vt100 3 ansi 4 dumb 5 tvi925 6 ibm3151 7 vt320 8 hp700 9 extra1 10 extra2 11 extra3	.1.3.6.1.4.1.1966.12.1.5.1.1.8
portPages For DSLogin line service, this is the number of video pages the terminal supports. Valid values are 1-7. The default is 5 pages.	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.1966.12.1.5.1.1.9
portPreDefinedUser For DSLogin line service, makes this a line that is dedicated to the specified user. Only this user will be able to log in on this line and they won't need to enter their login name - just their password.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.1966.12.1.5.1.1.10
portDSPort The Device Server port number.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.1.1.11
portIdleTimer Enter a time period, in seconds, for which the Idle Timer will run. Use this timer to close a connection because of inactivity. When the Idle Timer expires, the Device Server will end the connection. The maximum value i…	Integer32r/w Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.5.1.1.12
portSessionTimer Enter a time, in seconds, for which the Session Timer will run. Use this timer to forcibly close the session (connection). When the Session Timer expires, the Device Server will end the connection. The default value is …	Integer32r/w Constraints: range: 0-4294967	.1.3.6.1.4.1.1966.12.1.5.1.1.13
portSecurity Enables/disables login/password authentication, locally or externally, on reverse Telnet connections. The default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.14
portBreak Specifies how a break is interpreted: None-The Device Server ignores the break key completely and it is not passed through to the host. This is the default setting. Local-The Device Server deals with the break locall…	Enumerationr/w Enumerated Values: 1 off 2 local 3 remote 4 brkintr	.1.3.6.1.4.1.1966.12.1.5.1.1.15
portInboundFlowControl Determines if input flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.16
portOutboundFlowControl Determines if output flow control is to be used. Default is On. This is active only when Line Flow Control is set to Soft, Hard, or Both.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.17
portInitialMode Specifies the initial interface a user navigates when logging into the line; either the Menu or a prompt for the CLI. The default is CLI.	Enumerationr/w Enumerated Values: 1 cli 2 menu	.1.3.6.1.4.1.1966.12.1.5.1.1.18
portReset Resets the terminal type connected to the line when a user logs out.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.19
portKeepalive Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active O…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.20
portMapCR Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.21
portMOTD Enables/disables the message of the day on the line.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.22
portHotKeyPrefix The prefix that a user types to lock a line or redraw the Menu. The default value is hex 01, which corresponds to Ctrl-a (^a) (hex value 02 would be Ctrl-b (^b), etc.): ^a l-(Lowercase L) Locks the line until the user u…	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.1.1.23
portLock When enabled, the user can lock his terminal with a password using the Hotkey Prefix (default Ctrl-a) ^a l (lowercase L). The Device Server prompts the user for a password and a confirmation.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.24
portEnable Is the Port Enabled. This field is not available on 1-port units.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.25
portMultiSession The number of Multisessions allowed on this port	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.1.1.26
portDialRetries The number of Dial Retries.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.1966.12.1.5.1.1.27
portDialTimeout The timeout value when dialing in seconds.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.1966.12.1.5.1.1.28
portInternetAddress The Internet address of this port.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.1.1.29
portRawOption Defines the multihost Service and direct connection initiate mode	Enumerationr/w Enumerated Values: 1 noneMultihost 2 multihost 3 directAny	.1.3.6.1.4.1.1966.12.1.5.1.1.30
portDirectTrigger Defines the direct connection initiate char	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.1.1.31
portDataLogging When on, serial data will be buffered if the TCP connection is lost. When the TCP connection is re-established, the buffered serial data will be sent to its destination (this option is not available when Monitor DSR, …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.32
portSacSupport When on, a user can access SAC (the interface of the Microsoft Emergency Management Systems utility) through EasyPort Web when the device server's serial port is connected to a Microsoft Server 2003 or Microsoft Serv…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.33
portSendName Send the port name on connect. Applies to direct raw, silent raw, and TruePort (server-initiated) srevice types.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.1.1.34
portConnectInitiateString String to be sent when connection is initiated.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.1966.12.1.5.1.1.35
portConnectTerminateString String to be sent when connection is terminated.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.1966.12.1.5.1.1.36
portConnectStringDelay The delay after sending the connect or terminate string, in milliseconds	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.1.1.37
portBreakLength Amount of time, in milliseconds, to send a break signal (tunnel service only)	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.1.1.38
portBreakDelay The delay, in milliseconds, after sending a break signal (tunnel service only)	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.1.1.39

portHdwTable

table

.1.3.6.1.4.1.1966.12.1.5.2 · 1 row entry · 33 columns

Open in standard view

Port.

portHdwEntry entry .1.3.6.1.4.1.1966.12.1.5.2.1

An entry in the portHdwEntry, each relating to a port.

Indexes

portHdwIndex

Column	Syntax	OID
portHdwIndex Port hardware Index	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.2.1.1
portHdwStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.2.1.2
portHdwInterface Specifies the type of line that is being used with the Device Server. Select either EIA-232, EIA-422, or EIA-485.	Enumerationr/w Enumerated Values: 1 eia232 2 eia422 3 eia485	.1.3.6.1.4.1.1966.12.1.5.2.1.3
portHdwSpeed Specifies the baud rate of the line; keep in mind that speed is affected by the length of the cable. When bCustom is set, then the baud rate is specified by portHwdCustomSpeed. Internal modems only support the followin…	Enumerationr/w Enumerated Values: 1 b50 2 b75 3 b110 4 b134 5 b150 6 b200 7 b300 8 b600 9 b1200 10 b1800 11 b2400 12 b4800 13 b9600 14 b19200 15 b38400 16 b57600 17 b115200 18 b230400 23 b28800 24 bCustom	.1.3.6.1.4.1.1966.12.1.5.2.1.4
portHdwDataBits Specifies the number of bits in a byte. The default is 8. Internal modems only support 7 and 8 data bits.	Enumerationr/w Enumerated Values: 1 d5 2 d6 3 d7 4 d8	.1.3.6.1.4.1.1966.12.1.5.2.1.5
portHdwParity Specifies if you are using Even, Odd, or No parity on the line. If you want to force a parity type, you can specify Mark for 1 or Space for 0.	Enumerationr/w Enumerated Values: 1 none 2 odd 3 even 4 mark 5 space	.1.3.6.1.4.1.1966.12.1.5.2.1.6
portHdwStopBits Specifies the number of stop bits that follow a byte. Certain models do not support 1.5 stop bits. Internal modems only support 1 stop bit.	Enumerationr/w Enumerated Values: 1 s1 2 s2 3 s1d5	.1.3.6.1.4.1.1966.12.1.5.2.1.7
portHdwFlowControl Defines whether the data flow is handled by the software (Soft), hardware (Hard), Both, or None.	Enumerationr/w Enumerated Values: 1 none 2 soft 3 hard 4 both	.1.3.6.1.4.1.1966.12.1.5.2.1.8
portHdwMonitorDSR Specifies whether the RS-232 signal DSR (Data Set Ready) should be monitored, for Device Servers with a DTE serial interface. On a Device Server with a DCE serial interface, this object specifies whether the DTR (Data …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.9
portHdwMonitorDCD Specifies whether the RS-232 signal DCD (Data Carrier Detect) should be monitored. This object does not apply to DCE serial interfaces. This is used with modems or any other device that sends a DCD signa…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.10
portHdwDuplex Specify whether the line is Full Duplex (communication both ways at the same time) or Half Duplex (communication in one direction at a time).	Enumerationr/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.1966.12.1.5.2.1.11
portHdwTXDriverControl Used with a EIA-485 serial interface, if your application supports RTS (Request To Send), select this option. Otherwise, select Auto. Default is Auto	Enumerationr/w Enumerated Values: 1 auto 2 rts	.1.3.6.1.4.1.1966.12.1.5.2.1.12
portHdwEchoSuppression This parameter applies only to EIA-485 Half Duplex mode. All characters will be echoed to the user and transmitted across the serial ports. Some EIA-485 applications require local echo to be enabled in order to monitor …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.13
portHdwUART portHdwUART	Enumeration Enumerated Values: 1 scc 2 smc 3 exar	.1.3.6.1.4.1.1966.12.1.5.2.1.14
portHdwIRQ Port Hardware IRQ	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.2.1.15
portHdwTxBytes portHdwTxBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.16
portHdwRxBytes portHdwRxBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.17
portHdwFrameErrs portHdwFrameErrs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.18
portHdwParityErrs portHdwParityErrs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.19
portHdwBreaks portHdwBreaks	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.20
portHdwOverruns portHdwOverruns	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.5.2.1.21
portHdwRTS portHdwRTS	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.22
portHdwCTS portHdwCTS	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.23
portHdwDTR portHdwDTR	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.24
portHdwDSR portHdwDSR	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.25
portHdwCD portHdwCD	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.26
portHdwRI portHdwRI	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.27
portSoftTermination Enables or disables software line termination.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.29
portHdwCustomSpeed The custom baud rate for this port.	Integer32r/w Constraints: range: 50-1843200	.1.3.6.1.4.1.1966.12.1.5.2.1.30
portHdwDiscardCharactersRecievedWithErrors This option if set will discard any characters recieved on the uart that have overrun, framing or parity errors. If not set, then the characters are sent out the network connection	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.31
portHdwRtsToggle This option if set will toggle RTS on before transmitting the first character and toggle RTS off after transmitting the last character.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.2.1.32
portHdwRtsInitialDelay The delay, in msec, between turning RTS on and transmittng the first character.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.1966.12.1.5.2.1.33
portHdwRtsFinalDelay The delay, in msec, between transmitting the last character and turning RTS off.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.1966.12.1.5.2.1.34

portTelnetTable

table

.1.3.6.1.4.1.1966.12.1.5.3 · 1 row entry · 15 columns

Open in standard view

Port Telnet Table.

portTelnetEntry entry .1.3.6.1.4.1.1966.12.1.5.3.1

An entry in the portTelnetEntry, each relating to a port.

Indexes

portTelnetIndex

Column	Syntax	OID
portTelnetIndex portTelnetIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.3.1.1
portTelnetStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.3.1.2
portTelnetPort The port number the target host is listening on for incoming connections. Default is 23.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.3.1.3
portTelnetHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.3.1.4
portTelnetTermType Type of terminal attached to this line; for example, ANSI or WYSE60.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.3.1.5
portTelnetEcho Toggles between local echo of entered characters and suppressing local echo. Local echo is used for normal processing, while suppressing the echo is convenient for entering text that should not be displayed on the scree…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.3.1.6
portTelnetMapnl Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.3.1.7
portTelnetMode When On, keyboard input is not sent to the remote host until Enter is pressed, otherwise input is sent every time a key is pressed. Default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.3.1.8
portTelnetInterrupt Defines the interrupt character. Typing the interrupt character interrupts the current process. This value is in hexadecimal with a default value of 3 (ASCII value ^C).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.9
portTelnetQuit Defines the quit character. Typing the quit character closes and exits the current telnet session. This value is in hexadecimal with a default value of 1c (ASCII value FS).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.10
portTelnetEOF Defines the end-of-file character. When Line Mode is On, entering the eof character as the first character on a line sends the character to the remote host. This value is in hexadecimal with a default value of 4 (ASCII …	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.11
portTelnetErase Defines the erase character. When Line Mode is Off, typing the erase character erases one character. This value is in hexadecimal with a default value of 8 (ASCII value ^H).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.12
portTelnetEchoCC Defines the echo character. When Line Mode is On, typing the echo character echoes the text locally and sends only completed lines to the host. This value is in hexadecimal with a default value of 5 (ASCII value ^E).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.13
portTelnetBreak Defines the escape character. Returns you to the command line mode. This value is in hexadecimal with a default value of 1d (ASCII value GS).	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.3.1.14
portTelnetTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.3.1.15

portSSHTable

table

.1.3.6.1.4.1.1966.12.1.5.4 · 1 row entry · 24 columns

Open in standard view

Port SSH Table.

portSSHEntry entry .1.3.6.1.4.1.1966.12.1.5.4.1

An entry in the portSSHEntry, each relating to a port.

Indexes

portSSHIndex

Column	Syntax	OID
portSSHIndex portSSHIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.4.1.1
portSSHStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.4.1.2
portSSHPort The port number the target host is listening on for incoming connections. The default is port 22.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.4.1.3
portSSHHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.4.1.4
portSSHTermType The type of terminal that will connecting via SSH.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.4.1.5
portSSHVerbose Displays debug messages on the terminal.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.6
portSSHCompression Requests compression of all data. Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.7
portSSHAutoLogin Creates an automatic SSH login, using the Name and Password values.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.8
portSSHName The name of the user logging into the SSH session.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.5.4.1.9
portSSHProtocol Specify the SSH client version that will be used for the SSH session.	Enumerationr/w Enumerated Values: 1 ssh1 2 ssh2 3 sshBoth	.1.3.6.1.4.1.1966.12.1.5.4.1.10
portSSHRSA An authentication method used by SSH version 1 and 2. Use RSA authentication for the SSH session.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.11
portSSHDSA An authentication method used by SSH version 2. Use DSA authentication for the SSH session.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.12
portSSHKeyboard The user types in a password for authentication.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.13
portSSHCipherSSH1 Select the encryption method (cipher) that you want to use for your SSH version 1 connection: 3DES or Blowfish	Enumerationr/w Enumerated Values: 1 tripledes 2 blowfish	.1.3.6.1.4.1.1966.12.1.5.4.1.14
portSSHFirstSSH2Cipher Select the first priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Poly1305	Enumerationr/w Enumerated Values: 1 tripledes 2 blowfish 3 aes-cbc 4 cast 5 arcfour 6 aes-ctr 7 aes-gcm 8 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.15
portSSHSecondSSH2Cipher Select the second priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.16
portSSHThirdSSH2Cipher Select the third priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.17
portSSHFourthSSH2Cipher Select the fourth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.18
portSSHFifthSSH2Cipher Select the fifth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.19
portSSHTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.4.1.20
portSSHStrictHostKeyChecking When set, the device server must have a host key loaded.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.4.1.21
portSSHSixthSSH2Cipher Select the sixth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Pol…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.22
portSSHSeventhSSH2Cipher Select the seventh priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-P…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.23
portSSHEighthSSH2Cipher Select the eighth priority negotiation for the encryption method (ciphers) that the Device Server will use for the SSH version 2 connection: None, 3DES, Blowfish, AES-CBC, CAST, Arcfour, AES-CTR, AES-GCM, or ChaCha20-Po…	Enumerationr/w Enumerated Values: 1 none 2 tripledes 3 blowfish 4 aes-cbc 5 cast 6 arcfour 7 aes-ctr 8 aes-gcm 9 chacha20-poly1305	.1.3.6.1.4.1.1966.12.1.5.4.1.24

portPPPTable

table

.1.3.6.1.4.1.1966.12.1.5.5 · 1 row entry · 36 columns

Open in standard view

Port PPP Table.

portPPPEntry entry .1.3.6.1.4.1.1966.12.1.5.5.1

An entry in the portPPPEntry, each relating to a port.

Indexes

portPPPIndex

Column	Syntax	OID
portPPPIndex portPPPIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.5.1.1
portPPPStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.5.1.2
portPPPLocalIpAddr The IPv4 IP address of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is part of the same network or subnetwork as the remote end; for example, if t…	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.5.5.1.3
portPPPRemoteIpAddr The IPv4 IP address of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. If you set the PPP parameter IP Address Negotiation to On, the Device Server …	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.5.5.1.4
portPPPSubnetBits The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Netmask is set in the RADIUS file, the …	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.5.5.1.5
portPPPIpV6LocalIpAddr The local IPv6 interface identifier of the Device Server end of the PPP link. For routing to work, you must enter a local IP address. Choose an address that is part of the same network or subnetwork as the remote end. D…	Ipv6InterfaceIdr/w Textual Convention: Ipv6InterfaceId OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.5.1.6
portPPPIpV6RemoteIpAddr The remote IPv6 interface identifier of the remote end of the PPP link. Choose an address that is part of the same network or subnetwork as the Device Server. If you set the PPP parameter IP Address Negotiation to On, t…	Ipv6InterfaceIdr/w Textual Convention: Ipv6InterfaceId OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.5.1.7
portPPPAccm Specifies the ACCM (Asynchronous Control Character Map) characters that should be escaped from the data stream. This is entered as a 32-bit hexadecimal number with each bit specifying whether or not the corresponding ch…	Hex32r/w Textual Convention: Hex32 OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.5.5.1.8
portPPPMru The Maximum Receive Unit (MRU) parameter specifies the maximum size of PPP packets that the Device Server's port will accept. Enter a value between 64 and 1500 bytes; for example, 512. The default value is 1500. If your…	Integer32r/w Constraints: range: 64-1500	.1.3.6.1.4.1.1966.12.1.5.5.1.9
portPPPSecurity The type of authentication that will be done on the link: None, PAP, or CHAP. The default is CHAP. You can use PAP or CHAP to authenticate a port or user on the Device Server, from a remote location, or authenticate a r…	Enumerationr/w Enumerated Values: 1 none 2 pap 3 chap	.1.3.6.1.4.1.1966.12.1.5.5.1.10
portPPPUser Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote user, who will be authenticated by the Device Server, or you a…	OctetStringr/w Constraints: range: 0-254	.1.3.6.1.4.1.1966.12.1.5.5.1.11
portPPPRemoteUser Complete this field only if you have specified PAP or CHAP (security protocols) in the Security field, and you wish to dedicate this line to a single remote user, who will be authenticated by the Device Server, or you a…	OctetStringr/w Constraints: range: 0-254	.1.3.6.1.4.1.1966.12.1.5.5.1.12
portPPPACComp This determines whether compression of the PPP Address and Control fields take place on the link. The default is On. For most applications this should be enabled.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.13
portPPPProtoComp This determines whether compression of the PPP Protocol field takes place on this link. The default is On.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.14
portPPPVJComp This determines whether Van Jacobson Compression is used on this link. The default is On. If your user is authenticated by the Device Server, this VJ compression value will be overridden if you have set the User Framed …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.15
portPPPMagicNegotiation Determines if a line is looping back. If enabled (On), random numbers are sent on the link. The random numbers should be different, unless the link loops back. The default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.16
portPPPIPAddrNegotiation Specifies whether or not IP address negotiation will take place. IP address negotiation is where the Device Server allows the remote end to specify its IP address. The default value is Off. When On, the IP address speci…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.17
portPPPCRTimeout The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a configure request packet to have been lost.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1966.12.1.5.5.1.18
portPPPTRTimeout The maximum time, in seconds, that LCP (Link Control Protocol) will wait before it considers a terminate request packet to have been lost.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1966.12.1.5.5.1.19
portPPPCRRetry The maximum number of times a configure request packet will be sent before the link is terminated.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.5.1.20
portPPPTRRetry The maximum number of times a terminate request packet will be sent before the link is terminated.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.5.1.21
portPPPNakRetry The maximum number of times a configure NAK packet will be sent before the link is terminated.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.5.1.22
portPPPAuthTimeout The timeout, in seconds, during which successful PAP or CHAP authentication must take place (when PAP or CHAP is turned On). If the timer expires before the remote end has been authenticated successfully, the link will …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1966.12.1.5.5.1.23
portPPPRoamingCallback A user can enter a telephone number that the Device Server will use to callback him/her. This feature is particularly useful for a mobile user. Roaming callback can only work when the User Callback parameter is set to O…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.24
portPPPChallengInterval The interval, in seconds, for which the Device Server will issue a CHAP re-challenge to the remote end. During CHAP authentication, an initial CHAP challenge takes place, and is unrelated to CHAP re-challenges. The init…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.5.1.25
portPPPRouting Determines the routing mode (RIP, Routing Information Protocol) used on the PPP interface as one of the following options: None-Disables RIP over the PPP/SLIP interface. Send-Sends RIP over the PPP/SLIP interface. Liste…	Enumerationr/w Enumerated Values: 1 none 2 send 3 listen 4 sendAndListen	.1.3.6.1.4.1.1966.12.1.5.5.1.26
portPPPDynamicDNSEnabled Enable/disable dynamic DNS.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.5.1.27
portPPPDynamicDNSHostname Host name.	OctetStringr/w Constraints: range: 1-14	.1.3.6.1.4.1.1966.12.1.5.5.1.28
portPPPDynamicDNSUserName user name.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.1966.12.1.5.5.1.29
portPPPDynamicDNSPassword Password.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.1966.12.1.5.5.1.30
portPPPDynamicDNSStatusString Dynamic DNS Status	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.1966.12.1.5.5.1.31
portPPPMSDirectConnection Set for Microsoft PPP connection working mode	Enumerationr/w Enumerated Values: 1 disable 2 server 3 client	.1.3.6.1.4.1.1966.12.1.5.5.1.32
portPPPIPv6Prefix You can optionally specify an IPv6 global network prefix that the Device Server will advertise to the device at the other end of the PPP link. Default: 0:0:0:0	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.5.1.33
portPPPIPv6PrefixBits Specify the prefix bits for the IPv6 global network prefix. Default is 64.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.5.5.1.34
portPPPEchoTimeout The timeout, in seconds, to wait for an Echo reply.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.1966.12.1.5.5.1.35
portPPPEchoRetry The maximum number of Echo reply timeouts before the link is terminated.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.5.1.36

portSLIPTable

table

.1.3.6.1.4.1.1966.12.1.5.6 · 1 row entry · 8 columns

Open in standard view

Port SLIP Table.

portSLIPEntry entry .1.3.6.1.4.1.1966.12.1.5.6.1

An entry in the portSLIPEntry, each relating to a port.

Indexes

portSLIPIndex

Column	Syntax	OID
portSLIPIndex portSLIPIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.6.1.1
portSlipStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.6.1.2
portSLIPLocalIpAddress The IPv4 address of the Device Server end of the SLIP link. For routing to work you must enter an IP address in this field. Choose an address that is part of the same network or subnetwork as the remote end; for example…	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.5.6.1.3
portSLIPRemoteIpAddress The IPv4 address of the remote end of the SLIP link. Choose an address that is part of the same network or subnetwork as the Device Server. If your user is authenticated by the Device Server, this remote IP address will…	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.5.6.1.4
portSLIPSubnetBits The number of bits in the subnet mask. For example, a subnet mask of 255.255.0.0 has 16 subnet/prefix bits. If your user is authenticated by RADIUS and the RADIUS parameter Framed-Netmask is set in the RADIUS file, the …	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.5.6.1.5
portSLIPMtu The Maximum Transmission Unit (MTU) parameter restricts the size of individual SLIP packets being sent by the Device Server. Enter a value between 256 and 1006 bytes; for example, 512. The default value is 256. If your …	Integer32r/w Constraints: range: 256-1006	.1.3.6.1.4.1.1966.12.1.5.6.1.6
portSLIPVJComp This determines whether Van Jacobson compression is used on this link; that is, whether you are using SLIP or C-SLIP (compressed SLIP). The choices are On (C-SLIP) or Off (SLIP). The default is On. C-SLIP greatly improv…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.6.1.7
portSLIPRouting Determines the routing mode (RIP, Routing Information Protocol) used on the SLIP interface as one of the following options: None-Disables RIP over the PPP/SLIP interface. Send-Sends RIP over the PPP/SLIP interface. List…	Enumerationr/w Enumerated Values: 1 none 2 send 3 listen 4 sendAndListen	.1.3.6.1.4.1.1966.12.1.5.6.1.8

portUDPTable

table

.1.3.6.1.4.1.1966.12.1.5.7 · 1 row entry · 9 columns

Open in standard view

Port UDP Table.

portUDPEntry entry .1.3.6.1.4.1.1966.12.1.5.7.1

An entry in the portUDPEntry, each relating to a port.

Indexes

portUDPIndex portUDPEntryIndex

Column	Syntax	OID
portUDPIndex portUDPIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.7.1.1
portUDPEntryIndex portUDPNumber	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.5.7.1.2
portUDPStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.7.1.3
portUDPStartAddress The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server will listen for messages from and/or send messages to	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.7.1.4
portUDPEndAddress The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will listen for messages from and/or send messages to.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.7.1.5
portUDPPort The port that the Device Server will use to receive messages from or relay messages to servers/hosts.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.7.1.6
portUDPDirection The direction in which information is received or relayed: None-UDP service not enabled. In-LAN to serial. Out-Serial to LAN. Both-Messages are relayed both directions.	Enumerationr/w Enumerated Values: 1 none 2 in 3 out 4 both	.1.3.6.1.4.1.1966.12.1.5.7.1.7
portUDPOption when want UDP port be any port which only valid for lan to serial direction set this to 2, others for auto lean UDP port and specific port set this to 1	Enumerationr/w Enumerated Values: 1 specificOrAutoLearn 2 anyPort	.1.3.6.1.4.1.1966.12.1.5.7.1.8
portUDPTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.7.1.9

portVmodemTable

table

.1.3.6.1.4.1.1966.12.1.5.8 · 1 row entry · 16 columns

Open in standard view

Port Vmodem Table.

portVmodemEntry entry .1.3.6.1.4.1.1966.12.1.5.8.1

An entry in the portVmodemEntry, each relating to a port.

Indexes

portVmodemIndex

Column	Syntax	OID
portVmodemIndex portVmodemIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.8.1.1
portVmodemStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.8.1.2
portVmodemHost The target host name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.8.1.3
portVmodemPort The port number the target host is listening on for messages.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.8.1.4
portVmodemSuccessString String that is sent to the serial device when a connection succeeds. If no string is entered, then the string CONNECT will be sent with the connecting speed, for example CONNECT 9600.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1966.12.1.5.8.1.5
portVmodemFailureString String that is sent to the serial device when a connection fails. If no string is entered, then the string NO CARRIER will be sent.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.1966.12.1.5.8.1.6
portVmodemSuppress If set to No, connection success/failure indication strings are sent to the connected device, otherwise these indications are suppressed.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.8.1.7
portVmodemStyle One of the following: Verbose-Return codes (strings) are sent to the connected device. Numeric-The following characters can be sent to the connected device: 1 Successfully Connected 2 Failed to Connect 4 Error	Enumerationr/w Enumerated Values: 1 numeric 2 verbose	.1.3.6.1.4.1.1966.12.1.5.8.1.8
portVmodemResponseDelay The vmodem delay to response, in milliseconds, default is 250.	Integer32r/w Constraints: range: 0-999	.1.3.6.1.4.1.1966.12.1.5.8.1.9
portVmodemEcho If set to on, vmodem will echo input.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.8.1.10
portVmodemMode In auto mode vmodem will automatically use the host and port make connection, otherwise will wait for use input	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.1966.12.1.5.8.1.11
portVmodemDCD Define the behavior of DCD	Enumerationr/w Enumerated Values: 1 alwaysHigh 2 followConnection	.1.3.6.1.4.1.1966.12.1.5.8.1.12
portVmodemRTS Define the behavior of signal RTS	Enumerationr/w Enumerated Values: 1 alwaysHigh 4 representDCD 5 representRI	.1.3.6.1.4.1.1966.12.1.5.8.1.13
portVmodemDTR Define the behavior of signal DTR	Enumerationr/w Enumerated Values: 1 alwaysHigh 3 representDCD 4 representRI	.1.3.6.1.4.1.1966.12.1.5.8.1.14
portVmodemInitString String that used as initial AT commands.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.8.1.15
portVmodemTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.8.1.16

portRawTable

table

.1.3.6.1.4.1.1966.12.1.5.9 · 1 row entry · 5 columns

Open in standard view

Port Raw Table.

portRawEntry entry .1.3.6.1.4.1.1966.12.1.5.9.1

An entry in the portRawEntry, each relating to a port.

Indexes

portRawIndex

Column	Syntax	OID
portRawIndex Index of the corresponding serial port.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.9.1.1
portRawStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.9.1.2
portRawPort The port number the target host is listening on for incoming connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.9.1.3
portRawHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.9.1.4
portRawTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.9.1.5

portBidirTable

table

.1.3.6.1.4.1.1966.12.1.5.10 · 1 row entry · 5 columns

Open in standard view

Port Bidir Table.

portBidirEntry entry .1.3.6.1.4.1.1966.12.1.5.10.1

An entry in the portBidirEntry, each relating to a port.

Indexes

portBidirIndex

Column	Syntax	OID
portBidirIndex portBidirIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.10.1.1
portBidirStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.10.1.2
portBidirPort The port number the target host is listening on for incoming connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.10.1.3
portBidirHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.10.1.4
portBidirTunnelName The name of the HTTP tunnel associated with this service's target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.10.1.5

portRloginTable

table

.1.3.6.1.4.1.1966.12.1.5.11 · 1 row entry · 5 columns

Open in standard view

Port Rlogin Table.

portRloginEntry entry .1.3.6.1.4.1.1966.12.1.5.11.1

An entry in the portRloginEntry, each relating to a port.

Indexes

portRloginIndex

Column	Syntax	OID
portRloginIndex Index of the corresponding serial port.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.11.1.1
portRloginStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.11.1.2
portRloginHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.11.1.3
portRloginTermType Type of terminal attached to this line; for example, ANSI or WYSE60.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.11.1.4
portRloginTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.11.1.5

portEmailTable

table

.1.3.6.1.4.1.1966.12.1.5.12 · 1 row entry · 13 columns

Open in standard view

Port Email Table.

portEmailEntry entry .1.3.6.1.4.1.1966.12.1.5.12.1

An entry in the portEmailEntry, each relating to a port.

Indexes

portEmailIndex

Column	Syntax	OID
portEmailIndex Index of the corresponding serial port.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.12.1.1
portEmailStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.12.1.2
portEmailActive Determines whether or not email notification is turned on. Default is Off.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.3
portEmailLevel Choose the event level that triggers an email notification: Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug. You are selecting the lowest notification level; therefore, when you select Debug, you will…	Enumerationr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 informational 8 debug	.1.3.6.1.4.1.1966.12.1.5.12.1.5
portEmailTo An email address or list of email addresses that will receive the email notification.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.5.12.1.6
portEmailFrom This field can contain an email address that might identify the Device Server name or some other value.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.5.12.1.7
portEmailReply The email address to whom all replies to the email notification should go.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.5.12.1.9
portEmailSubject A text string, which can contain spaces, that will display in the Subject field of the email notification.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.1966.12.1.5.12.1.10
portEmailUseDefaultLevel Inherit 'level' setting from the Server Email Alert.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.11
portEmailUseDefaultTo Inherit 'to' setting from the Server Email Alert.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.12
portEmailUseDefaultFrom Inherit 'from' setting from the Server Email Alert.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.13
portEmailUseDefaultReply Inherit 'reply' setting from the Server Email Alert.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.14
portEmailUseDefaultSubject Inherit 'subject' setting from the Server Email Alert.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.12.1.15

portSSLTable

table

.1.3.6.1.4.1.1966.12.1.5.13 · 1 row entry · 14 columns

Open in standard view

Port SSL Table.

portSSLEntry entry .1.3.6.1.4.1.1966.12.1.5.13.1

An entry in the portSSLEntry, each relating to a port.

Indexes

portSSLIndex

Column	Syntax	OID
portSSLIndex port SSL Index	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.13.1.1
portSSLStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.13.1.2
portSSLEnabled Enables/disables SSL.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.13.1.3
portSSLuseServer Uses the SSL/TLS server configuration for the line.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.13.1.4
portSSLVersion Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it will try an SSLv2 connection. TLSv1-The connection wil…	Enumerationr/w Enumerated Values: 1 any 2 tlsv1 3 sslv3	.1.3.6.1.4.1.1966.12.1.5.13.1.5
portSSLType Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.	Enumerationr/w Enumerated Values: 1 client 2 server	.1.3.6.1.4.1.1966.12.1.5.13.1.6
portSSLVerifyPeerCertificate Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.13.1.7
portSSLCountry A two character country code; for example, US.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.1966.12.1.5.13.1.8
portSSLStateProv Up to a 128 character entry for the state/province; for example, IL.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.5.13.1.9
portSSLLocality Up to a 128 character entry for the location; for example, a city.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.5.13.1.10
portSSLOrganisation Up to a 64 character entry for the organization; for example, Accounting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.5.13.1.11
portSSLOrganisationUnit Up to a 64 character entry for the unit in the organization; for example, Payroll.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.5.13.1.12
portSSLCommonName Up to a 64 character entry for common name; for example, the host name or fully qualified domain name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.5.13.1.13
portSSLEmail Up to a 64 character entry for an email address; for example, acct@anycompany.com.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.5.13.1.14

portPacketForwardingTable

table

.1.3.6.1.4.1.1966.12.1.5.14 · 1 row entry · 21 columns

Open in standard view

The port packet forwarding configuration table.

portPacketForwardingEntry entry .1.3.6.1.4.1.1966.12.1.5.14.1

An entry in the port packet forwarding configuration table, each relating to a serial port.

Indexes

portPacketForwardingIndex

Column	Syntax	OID
portPacketForwardingIndex Port Index	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.14.1.1
portPacketForwardingStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.14.1.2
portPacketForwardingPacketSize When the size of the packet equals this value the packet is transmitted. 0 - Ignore option	Integer32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.1966.12.1.5.14.1.3
portPacketForwardingIdleTime When the elapsed time between one character to another character equals this value the packet is transmitted. 0 - Ignore option	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.14.1.4
portPacketForwardingForceTransmitTime When the elapsed time from the 1st character received equals this value the packet is transmitted. 0 - Ignore option.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.14.1.5
portPacketForwardingEnableSOF1 Enable/disable the start of frame 1.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.6
portPacketForwardingSOF1 Any characters received before the start of frame is received will be ignored.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.7
portPacketForwardingEnableSOF2 Enable/disable the start of frame 2. When this is enabled SOF1 must enabled	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.8
portPacketForwardingSOF2 Any characters received before the start of frame is received will be ignored.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.9
portPacketForwardingStartFrameTransmit A flag to determine if we will transmit the start of frame character(s).	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.10
portPacketForwardingEnableEOF1 Enable/disable the end of frame 1.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.11
portPacketForwardingEOF1 The frame will be transmitted after this character is received based on the forwarding rule.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.12
portPacketForwardingEnableEOF2 Enable/disable the end of frame 2. When this is enabled EOF1 must enabled	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.13
portPacketForwardingEOF2 The frame will be transmitted after this character is received based on the forwarding rule.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.14
portPacketForwardingEnableEndTrigger1 Enable/disable the end of trigger 1.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.15
portPacketForwardingEndTrigger1 When the end trigger is received the packet will transmitted based on the forwarding rules.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.16
portPacketForwardingEnableEndTrigger2 Enable/disable the end of trigger 2. When this is enabled EOF1 must enabled	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.14.1.17
portPacketForwardingEndTrigger2 When the end trigger is received the packet will transmitted based on the forwarding rules.	Hex8r/w Textual Convention: Hex8 OctetString Type Constraints: range: 1	.1.3.6.1.4.1.1966.12.1.5.14.1.18
portPacketForwardingForwardingRule Forwarding rules.	Enumerationr/w Enumerated Values: 0 trigger 1 triggerplus1 2 triggerplus2 3 stripTrigger	.1.3.6.1.4.1.1966.12.1.5.14.1.19
portPacketForwardingPacketIdleTime When in Packet Accumulation mode it used for packet idle time	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.14.1.20
portPacketForwardingForwardMode Forwarding Mode.	Enumerationr/w Enumerated Values: 0 forwardModeInvalid 1 optimizeEthernetTrafic 2 minimizeLatency 3 messageAccumulation 4 custom	.1.3.6.1.4.1.1966.12.1.5.14.1.21

portTunnelTable

table

.1.3.6.1.4.1.1966.12.1.5.15 · 1 row entry · 5 columns

Open in standard view

Port Tunnel Table.

portTunnelEntry entry .1.3.6.1.4.1.1966.12.1.5.15.1

An entry in the portTunnelEntry, each relating to a port.

Indexes

portTunnelIndex

Column	Syntax	OID
portTunnelIndex portTunnelIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.15.1.1
portTunnelStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). On…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.15.1.2
portTunnelPort The port number the target host is listening on for incoming connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.15.1.3
portTunnelHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.15.1.4
portTunnelHttpTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.15.1.5

portMODBUSSlaveTable

table

.1.3.6.1.4.1.1966.12.1.5.16 · 1 row entry · 5 columns

Open in standard view

Port Modbus Slave Table.

portMODBUSSlaveEntry entry .1.3.6.1.4.1.1966.12.1.5.16.1

An entry in the portMODBUSSlaveEntry, each relating to a port.

Indexes

portMODBUSSlaveIndex

Column	Syntax	OID
portMODBUSSlaveIndex portMODBUSSlaveIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.16.1.1
portMODBUSSlaveStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.16.1.2
portMODBUSSlaveMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumerationr/w Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.5.16.1.3
portMODBUSSlaveCRLF Enable/disable appending CR/LF	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.16.1.4
portMODBUSSlaveUIDRange The UID range for this entry.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.1966.12.1.5.16.1.5

portMODBUSMasterTable

table

.1.3.6.1.4.1.1966.12.1.5.17 · 1 row entry · 4 columns

Open in standard view

Port Modbus Master Table.

portMODBUSMasterEntry entry .1.3.6.1.4.1.1966.12.1.5.17.1

An entry in the portMODBUSMasterEntry, each relating to a port.

Indexes

portMODBUSMasterIndex

Column	Syntax	OID
portMODBUSMasterIndex portMODBUSMasterIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.17.1.1
portMODBUSMasterStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.17.1.2
portMODBUSMasterMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumerationr/w Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.5.17.1.3
portMODBUSMasterCRLF Enable/disable appending CR/LF	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.17.1.4

portCustomAppTable

table

.1.3.6.1.4.1.1966.12.1.5.18 · 1 row entry · 3 columns

Open in standard view

Port CustomApp Table.

portCustomAppEntry entry .1.3.6.1.4.1.1966.12.1.5.18.1

An entry in the PortCustomAppEntry, each relating to a port.

Indexes

portCustomAppIndex

Column	Syntax	OID
portCustomAppIndex portCustomAppIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.18.1.1
portCustomAppStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). On…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.18.1.2
portCustomAppCommand The command line of the custom application.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.1966.12.1.5.18.1.3

portTrueportServiceTable

table

.1.3.6.1.4.1.1966.12.1.5.19 · 1 row entry · 7 columns

Open in standard view

Port TrueportService Table.

portTrueportServiceEntry entry .1.3.6.1.4.1.1966.12.1.5.19.1

An entry in the portTrueportServiceEntry, each relating to a port.

Indexes

portTrueportServiceIndex

Column	Syntax	OID
portTrueportServiceIndex The index of the corresponding serial port.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.19.1.1
portTrueportServiceStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.19.1.2
portTrueportServicePort The port number the target host is listening on for incoming connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.19.1.3
portTrueportServiceHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.19.1.4
portTrueportServiceClientInitiated Specifies whether or not the network connection is initiated by the client	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.19.1.5
portTrueportServiceActiveSignal When the line becomes active, this option has the following impact: o Lite Mode-When enabled, the EIA-232 signals remain high (active) before, during, and after the session. When disabled, the EIA-232 signals rema…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.19.1.6
portTrueportServiceTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.19.1.7

portPowerManagementTable

table

.1.3.6.1.4.1.1966.12.1.5.20 · 1 row entry · 4 columns

Open in standard view

Port Power Management Table.

portPowerManagementEntry entry .1.3.6.1.4.1.1966.12.1.5.20.1

An entry in the portPowerManagementEntry, each relating to a port.

Indexes

portPowerManagementIndex

Column	Syntax	OID
portPowerManagementIndex portPowerManagementIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.20.1.1
portPowerManagementStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.20.1.2
portPowerManagementName Power bar's name.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.1966.12.1.5.20.1.3
portPowerManagementModel Power bar's model	Enumerationr/w Enumerated Values: 1 rps820 2 rps830 3 rps1620 4 rps1630	.1.3.6.1.4.1.1966.12.1.5.20.1.4

portMultihostTable

table

.1.3.6.1.4.1.1966.12.1.5.21 · 1 row entry · 3 columns

Open in standard view

Port Multihost Table.

portMultihostEntry entry .1.3.6.1.4.1.1966.12.1.5.21.1

An entry in the portMultihostEntry, each relating to a port.

Indexes

portMultihostIndex

Column	Syntax	OID
portMultihostIndex portMultihostIndex	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.21.1.1
portMultihostStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.21.1.2
portMultihostMode Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode	Enumerationr/w Enumerated Values: 1 all 2 backup	.1.3.6.1.4.1.1966.12.1.5.21.1.4

portMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.5.22 · 1 row entry · 6 columns

Open in standard view

Multihost outbound table.

portMultihostOutboundEntry entry .1.3.6.1.4.1.1966.12.1.5.22.1

An entry in the portMultihostOutboundTable.

Indexes

portMultihostPortIndex portMultihostOutboundIndex

Column	Syntax	OID
portMultihostPortIndex The port number	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.22.1.1
portMultihostOutboundIndex The outbound entry number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.5.22.1.2
portMultihostOutboundStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.22.1.3
portMultihostOutboundHostID The host name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.22.1.4
portMultihostOutboundTcpPort The host TCP port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.22.1.5
portMultihostOutboundTunnel The HTTP tunnel associated with this host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.22.1.6

portPowerManagementPlugTable

table

.1.3.6.1.4.1.1966.12.1.5.23 · 1 row entry · 15 columns

Open in standard view

Power Management Plug Table.

portPowerManagementPlugEntry entry .1.3.6.1.4.1.1966.12.1.5.23.1

An entry in the portPowerManagementPlugTable, each relating to a plug.

Indexes

portPowerManagementPortIndex portPowerManagementPlugIndex

Column	Syntax	OID
portPowerManagementPortIndex The port number	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.23.1.1
portPowerManagementPlugIndex The plug number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.5.23.1.2
portPowerManagementPlugStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.23.1.3
portPowerManagementPlugName The plug's name.	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.1966.12.1.5.23.1.4
portPowerManagementPlugPowerUpInterval The plug's power up delay.	Enumerationr/w Enumerated Values: 1 puIntervalHalf 2 puInterval1 3 puInterval2 4 puInterval5 5 puInterval15 6 puInterval30 7 puInterval60 8 puInterval120 9 puInterval180 10 puInterval300	.1.3.6.1.4.1.1966.12.1.5.23.1.5
portPowerManagementPlugDefaultState the plug's default state.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.23.1.6
portPowerManagementDSLine the DS line number which the device on this plug is connected to(0:none, >0:corresponding to the line number.	PortNumberr/w Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.23.1.7
portPowerManagementMonitorHost The name of a host to monitor. If the host fails to respond to pings, this plug's power will be cycled. Set to a blank string to disable this feature.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.23.1.8
portPowerManagementMonitorInterval The time between pings, in minutes.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.23.1.9
portPowerManagementMonitorTimeout The amount of time to wait after pings, in seconds.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.23.1.10
portPowerManagementMonitorRetries The number of times to retry pings.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.23.1.11
portPowerManagementMonitorEnableDelay Wait before cycling power, in the event of a monitor timeout.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.23.1.12
portPowerManagementMonitorDelay Amount of time to wait before cycling power, in the event of a monitor timeout.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.5.23.1.13
portPowerManagementMonitorEnableConsoleMsg Display a message on the serial port, in the event of a monitor timeout, when power cycle delay is enabled..	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.23.1.14
portPowerManagementMonitorEnableEmail Send an email alert, in the event of a monitor timeout, when power cycle delay is enabled..	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.5.23.1.15

portMODBUSMasterMappingTable

table

.1.3.6.1.4.1.1966.12.1.5.24 · 1 row entry · 10 columns

Open in standard view

Modbus Master Slave Mapping.

portMODBUSMasterMappingEntry entry .1.3.6.1.4.1.1966.12.1.5.24.1

An entry in the portMODBUSMasterMappingTable, each relating to a slave mapping.

Indexes

portMODBUSMasterPortIndex portMODBUSMasterMappingIndex

Column	Syntax	OID
portMODBUSMasterPortIndex The port number	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.24.1.1
portMODBUSMasterMappingIndex The mapping table index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.5.24.1.2
portMODBUSMasterMappingStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.24.1.3
portMODBUSMasterMappingRemoteIP The remote slave's IP address.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.5.24.1.4
portMODBUSMasterMappingTransportType The remote slave's transport protocol type (TCP/UDP).	Enumerationr/w Enumerated Values: 0 tcp 1 udp	.1.3.6.1.4.1.1966.12.1.5.24.1.5
portMODBUSMasterMappingPortNumber the transport protocol layer port number (TCP/UDP).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.5.24.1.6
portMODBUSMasterMappingUIDStart The start UID of the UID range for this entry.	Integer32r/w Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.5.24.1.7
portMODBUSMasterMappingUIDEnd The end UID of the UID range for this entry.	Integer32r/w Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.5.24.1.8
portMODBUSMasterMappingUIDRangeMode The UID-IP mapping mode.	Enumerationr/w Enumerated Values: 0 host 1 gateway	.1.3.6.1.4.1.1966.12.1.5.24.1.9
portMODBUSMasterMappingTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.5.24.1.10

portSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.5.25 · 1 row entry · 8 columns

Open in standard view

SSL CIpher.

portSSLCipherEntry entry .1.3.6.1.4.1.1966.12.1.5.25.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

portSSLCipherIndex portSSLCipherPriority

Column	Syntax	OID
portSSLCipherIndex The port number	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.5.25.1.1
portSSLCipherPriority The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.5.25.1.2
portSSLCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.5.25.1.3
portSSLCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.5.25.1.4
portSSLCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.5.25.1.5
portSSLCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.5.25.1.6
portSSLCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.5.25.1.7
portSSLCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.5.25.1.8

modemInfoTable

table

.1.3.6.1.4.1.1966.12.1.6.1 · 1 row entry · 4 columns

Open in standard view

The modem info table.

modemInfoEntry entry .1.3.6.1.4.1.1966.12.1.6.1.1

An entry in the modemInfoTable, each relating to a host.

Indexes

modemIndex

Column	Syntax	OID
modemIndex The table entry number for this modem	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.6.1.1.1
modemStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.6.1.1.2
modemName The modem name used for this modem entry. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.6.1.1.3
modemInitialisation The modem Initialisation string	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.1966.12.1.6.1.1.4

defUserPortAccessTable

table

.1.3.6.1.4.1.1966.12.1.16.22 · 1 row entry · 5 columns

Open in standard view

The port access info table for user.

defUserPortAccessEntry entry .1.3.6.1.4.1.1966.12.1.16.22.1

An entry in the portAccessTable, each relating to a user's
access privileges for a serial port.

Indexes

defUserPortAccessPortIndex

Column	Syntax	OID
defUserPortAccessPortIndex The port number that user access applies to.	PortNumber Textual Convention: PortNumber Integer32 Type Constraints: range: 1..49	.1.3.6.1.4.1.1966.12.1.16.22.1.1
defUserPortAccessStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.16.22.1.2
defUserPortRWAccessAllowed Enable or disable the user's read write access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.16.22.1.3
defUserPortRIAccessAllowed Enable or disable the user's read input access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.16.22.1.4
defUserPortROAccessAllowed Enable or disable the user's read output access to the port.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.16.22.1.5

snmpCommunityTable

table

.1.3.6.1.4.1.1966.12.1.17.6 · 1 row entry · 5 columns

Open in standard view

snmpCommunityTable

snmpCommunityEntry entry .1.3.6.1.4.1.1966.12.1.17.6.1

snmpCommunityEntry

Indexes

snmpCommunityIndex

Column	Syntax	OID
snmpCommunityIndex snmpCommunityIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.17.6.1.1
snmpCommunityStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.17.6.1.2
snmpCommunityName A name that will be sent to the Device Server from an SNMP manager. This name will define the permissions of the manager.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.17.6.1.3
snmpCommunityIpAddress The IP address of the SNMP manager that will send requests to the Device Server. If the address is 0.0.0.0, any SNMP manager with the Community Name can access the Device Server.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.17.6.1.4
snmpCommunityPermission Permits the Device Server to respond to SNMP requests by: None-There is no response to requests from SNMP. Readonly-Responds only to Read requests from SNMP. Readwrite-Responds to both Read and Write requests from SNMP.	Enumerationr/w Enumerated Values: 1 none 2 readonly 3 readwrite	.1.3.6.1.4.1.1966.12.1.17.6.1.5

snmpTrapTable

table

.1.3.6.1.4.1.1966.12.1.17.7 · 1 row entry · 8 columns

Open in standard view

snmpTrapTable

snmpTrapEntry entry .1.3.6.1.4.1.1966.12.1.17.7.1

snmpTrapEntry

Indexes

snmpTrapIndex

Column	Syntax	OID
snmpTrapIndex snmpTrapIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.17.7.1.1
snmpTrapStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.17.7.1.2
snmpTrapName An arbitrary trap community name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.17.7.1.3
snmpTrapIpAddress Defines the hosts (by IP address) that will receive trap messages generated by the Device Server. Up to four trap hosts can be defined.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.17.7.1.4
snmpTrapTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.17.7.1.5
snmpTrapVersion Set trap version.	Enumerationr/w Enumerated Values: 1 v1 2 v2c 3 v3	.1.3.6.1.4.1.1966.12.1.17.7.1.6
snmpTrapType Set trap type. Inform is only valid for v2c or v3.	Enumerationr/w Enumerated Values: 1 trap 2 inform	.1.3.6.1.4.1.1966.12.1.17.7.1.7
snmpTrapEnable Set trap enabled.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.1966.12.1.17.7.1.8

dnsTable

table

.1.3.6.1.4.1.1966.12.1.18.1 · 1 row entry · 4 columns

Open in standard view

dnsTable

dnsEntry entry .1.3.6.1.4.1.1966.12.1.18.1.1

dnsEntry

Indexes

dnsIndex

Column	Syntax	OID
dnsIndex dnsIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.18.1.1.1
dnsStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.18.1.1.2
dnsIpAddress You can specify the IP addresses for up to two DNS (Domain Name Servers) hosts in your network. The first DNS entry in the list is the primary DNS and the second DNS entry is the secondary server.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.18.1.1.3
dnsActive Activates/deactivates a DNS entry.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.18.1.1.4

winsTable

table

.1.3.6.1.4.1.1966.12.1.19.1 · 1 row entry · 4 columns

Open in standard view

winsTable

winsEntry entry .1.3.6.1.4.1.1966.12.1.19.1.1

winsEntry

Indexes

winsIndex

Column	Syntax	OID
winsIndex winsIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.19.1.1.1
winsStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.19.1.1.2
winsIpAddress You can specify the IP addresses for up to two WINS (Windows Internet Naming Service) hosts in your network. The first WINS entry in the list is the primary WINS server and the second WINS entry is the secondary server.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.19.1.1.3
winsActive Activates/deactivates a WINS entry.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.19.1.1.4

gatewayTable

table

.1.3.6.1.4.1.1966.12.1.20.1 · 1 row entry · 7 columns

Open in standard view

gatewayTable

gatewayEntry entry .1.3.6.1.4.1.1966.12.1.20.1.1

gatewayEntry

Indexes

gatewayIndex

Column	Syntax	OID
gatewayIndex gatewayIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.20.1.1.1
gatewayStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.20.1.1.2
gatewayHost You can specify up to twenty hosts to act as gateways in your network. Each gateway host must be defined in the Device Server host table.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.20.1.1.3
gatewayType Specify the type of gateway: Default-A gateway which provides general access beyond your local network. Host-A gateway reserved for accessing a specific host external to your local network. Network-A gateway r…	Enumerationr/w Enumerated Values: 1 host 2 network 3 default	.1.3.6.1.4.1.1966.12.1.20.1.1.4
gatewayIpAddress When the gateway is a Host or Network gateway, you must specify the IP address of the target host machine/network.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.20.1.1.5
gatewaySubnetBits When the gateway is a Network gateway, you must specify the subnet/prefix bits for that network. If the IP address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bi…	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.20.1.1.6
gatewayInterface The interface that the device server is going to use to access the Remote Host. The list is comprised of the Ethernet interface(s) and serial ports configured for the Remote Access (PPP) or Remote Access (SLIP) profil…	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.20.1.1.7

ripKeysInfoTable

table

.1.3.6.1.4.1.1966.12.1.23.4 · 1 row entry · 8 columns

Open in standard view

The RIP authentication keys info table.

ripKeysInfoEntry entry .1.3.6.1.4.1.1966.12.1.23.4.1

An entry in the ripKeysInfoTable, each relating to a
RIP authentication key.

Indexes

ripKeysChainIndex ripKeysKeyIndex

Column	Syntax	OID
ripKeysChainIndex The key chain index for this RIP authentication key.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.23.4.1.1
ripKeysKeyIndex The key index in the chain for this RIP authentication key.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.23.4.1.2
ripKeyStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.23.4.1.3
ripKeyId The key Id for this RIP authentication key.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1966.12.1.23.4.1.4
ripKeyStartDate The starting date for which this RIP authentication key becomes effective. Format dd/mm/yyyy	Dater/w Textual Convention: Date OctetString Type Constraints: range: 8..10	.1.3.6.1.4.1.1966.12.1.23.4.1.5
ripKeyStartTime The starting time (local time) for which this RIP authentication key becomes effective. Format hh:mm:ss	Timer/w Textual Convention: Time OctetString Type Constraints: range: 5..8	.1.3.6.1.4.1.1966.12.1.23.4.1.6
ripKeyEndDate The end date , after which this RIP authentication key is no longer in effect.	Dater/w Textual Convention: Date OctetString Type Constraints: range: 8..10	.1.3.6.1.4.1.1966.12.1.23.4.1.7
ripKeyEndTime The end time (local time), after which this RIP authentication key is no longer in effect.	Timer/w Textual Convention: Time OctetString Type Constraints: range: 5..8	.1.3.6.1.4.1.1966.12.1.23.4.1.8

ripInfoTable

table

.1.3.6.1.4.1.1966.12.1.28.1 · 1 row entry · 8 columns

Open in standard view

The rip info table.

ripInfoEntry entry .1.3.6.1.4.1.1966.12.1.28.1.1

An entry in the ripInfoTable, each relating to a rip entry.

Indexes

ripIndex

Column	Syntax	OID
ripIndex The table entry number for this rip.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.28.1.1.1
ripTableIpAddr ripIpAddr	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.28.1.1.2
ripTableLastUpdate Last Update in Seconds	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.28.1.1.3
ripTableVersion Version	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.28.1.1.4
ripTableAuthType Authentication Type	Enumeration Enumerated Values: 1 noAuth 2 authData 3 password 4 md5	.1.3.6.1.4.1.1966.12.1.28.1.1.5
ripTableSequence Sequence	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.28.1.1.6
ripTableBadPackets ripTableBadPackets	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.28.1.1.7
ripTableBadRoutes ripTableBadRoutes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.28.1.1.8

tcpConnTable

table

.1.3.6.1.4.1.1966.12.1.29.1 · 1 row entry · 8 columns

Open in standard view

tcpConnTable.

tcpConnEntry entry .1.3.6.1.4.1.1966.12.1.29.1.1

An entry in the tcpConnTable

Indexes

tcpConnIndex

Column	Syntax	OID
tcpConnIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.29.1.1.1
tcpConnLocalAddress LocalAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.29.1.1.2
tcpConnLocalPort LocalPort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.29.1.1.3
tcpConnRemoteAddress RemoteAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.29.1.1.4
tcpConnRemotePort RemotePort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.29.1.1.5
tcpConnTxQueueBytes tcpConnTxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.29.1.1.6
tcpConnRxQueueBytes tcpConnRxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.29.1.1.7
tcpConnState State	Enumeration Enumerated Values: 1 established 2 synSent 3 synRecv 4 finWait1 5 finWait2 6 timewait 7 close 8 closeWait 9 lastack 10 listen 11 closing	.1.3.6.1.4.1.1966.12.1.29.1.1.8

udpConnTable

table

.1.3.6.1.4.1.1966.12.1.30.1 · 1 row entry · 8 columns

Open in standard view

udpConnTable

udpConnEntry entry .1.3.6.1.4.1.1966.12.1.30.1.1

An entry in the udpConnTable

Indexes

udpConnIndex

Column	Syntax	OID
udpConnIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.30.1.1.1
udpConnLocalAddress LocalAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.30.1.1.2
udpConnLocalPort LocalPort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.30.1.1.3
udpConnRemoteAddress RemoteAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.30.1.1.4
udpConnRemotePort RemotePort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.30.1.1.5
udpConnTxQueueBytes udpConnTxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.30.1.1.6
udpConnRxQueueBytes udpConnRxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.30.1.1.7
udpConnState State	Enumeration Enumerated Values: 1 established	.1.3.6.1.4.1.1966.12.1.30.1.1.8

tcpConnv6Table

table

.1.3.6.1.4.1.1966.12.1.34.1 · 1 row entry · 8 columns

Open in standard view

The rip info table.

tcpConnv6Entry entry .1.3.6.1.4.1.1966.12.1.34.1.1

An entry in the tcpConnv6Table

Indexes

tcpConnv6Index

Column	Syntax	OID
tcpConnv6Index Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.34.1.1.1
tcpConnv6LocalAddress LocalAddress	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.34.1.1.2
tcpConnv6LocalPort LocalPort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.34.1.1.3
tcpConnv6RemoteAddress RemoteAddress	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.34.1.1.4
tcpConnv6RemotePort RemotePort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.34.1.1.5
tcpConnv6TxQueueBytes tcpConnv6TxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.34.1.1.6
tcpConnv6RxQueueBytes tcpConnv6RxQueueBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.34.1.1.7
tcpConnv6State State	Enumeration Enumerated Values: 1 established 2 synSent 3 synRecv 4 finWait1 5 finWait2 6 timeWait 7 close 8 closeWait 9 lastAck 10 listen 11 closing	.1.3.6.1.4.1.1966.12.1.34.1.1.8

udpConnv6Table

table

.1.3.6.1.4.1.1966.12.1.35.1 · 1 row entry · 8 columns

Open in standard view

udpConnv6Table

udpConnv6Entry entry .1.3.6.1.4.1.1966.12.1.35.1.1

An entry in the udpConnv6Table

Indexes

udpConnv6Index

Column	Syntax	OID
udpConnv6Index Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.35.1.1.1
udpConnv6LocalAddress LocalAddress	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.35.1.1.2
udpConnv6LocalPort LocalPort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.35.1.1.3
udpConnv6RemoteAddress RemoteAddress	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.35.1.1.4
udpConnv6RemotePort RemotePort	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.35.1.1.5
udpConnv6TxQueueBytes TxQueue	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.35.1.1.6
udpConnv6RxQueueBytes RxQueue	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.35.1.1.7
udpConnv6State State	Enumeration Enumerated Values: 1 established	.1.3.6.1.4.1.1966.12.1.35.1.1.8

routev6Table

table

.1.3.6.1.4.1.1966.12.1.36.1 · 1 row entry · 7 columns

Open in standard view

The route IPv6 info table.

routev6Entry entry .1.3.6.1.4.1.1966.12.1.36.1.1

An entry in the route IPv6 Table

Indexes

routev6Index

Column	Syntax	OID
routev6Index Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.36.1.1.1
routev6Destination Destination	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.36.1.1.2
routev6PrefixBits PrefixBits	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.36.1.1.3
routev6Gateway Gateway	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.36.1.1.4
routev6Metric Metric	Integer32 Constraints: range: 1-15	.1.3.6.1.4.1.1966.12.1.36.1.1.5
routev6Flags Flags	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.36.1.1.6
routev6Interface Interface	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.36.1.1.7

ripv6InfoTable

table

.1.3.6.1.4.1.1966.12.1.37.1 · 1 row entry · 5 columns

Open in standard view

The ripv6 info table.

ripv6InfoEntry entry .1.3.6.1.4.1.1966.12.1.37.1.1

An entry in the ripv6InfoTable, each relating to a ripv6 entry.

Indexes

ripv6Index

Column	Syntax	OID
ripv6Index The table entry number for this ripv6.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.37.1.1.1
ripv6TableIpAddr ripv6IpAddr	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.37.1.1.2
ripv6TableLastUpdate Last Update in Seconds	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.37.1.1.3
ripv6TableBadPackets Last Update in Seconds	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.37.1.1.4
ripv6TableBadRoutes Last Update in Seconds	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.37.1.1.5

interfacev6InfoTable

table

.1.3.6.1.4.1.1966.12.1.38.1 · 1 row entry · 5 columns

Open in standard view

The interface IPv6 info table.

interfacev6InfoEntry entry .1.3.6.1.4.1.1966.12.1.38.1.1

An entry in the interface IPv6 table

Indexes

interfacev6Index

Column	Syntax	OID
interfacev6Index interfacev6Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.38.1.1.1
interfacev6Name interfacev6Name	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.38.1.1.2
interfacev6Address interfacev6Address	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.38.1.1.3
interfacev6PrefixBits interfacev6PrefixBits	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.38.1.1.4
interfacev6Scope interfacev6Scope	Enumeration Enumerated Values: 1 global 2 host 3 link 4 site 5 compatv4 6 unknown	.1.3.6.1.4.1.1966.12.1.38.1.1.5

sslCipherTable

table

.1.3.6.1.4.1.1966.12.1.39.12 · 1 row entry · 7 columns

Open in standard view

SSL CIpher.

sslCipherEntry entry .1.3.6.1.4.1.1966.12.1.39.12.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

sslCipherPriority

Column	Syntax	OID
sslCipherPriority The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.39.12.1.1
sslCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.39.12.1.2
sslCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.39.12.1.3
sslCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.39.12.1.4
sslCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.39.12.1.5
sslCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.39.12.1.6
sslCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.39.12.1.7

ethStatsInfoTable

table

.1.3.6.1.4.1.1966.12.1.41.1 · 1 row entry · 37 columns

Open in standard view

The Ethernet statistics table.

ethStatsInfoEntry entry .1.3.6.1.4.1.1966.12.1.41.1.1

An entry in the Ethernet statistics table, each relating to an Ethernet interface.

Indexes

ethStatsIndex

Column	Syntax	OID
ethStatsIndex The Ethernet interface number.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.41.1.1.1
ethStatsName Displays Ethernet statistics.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.41.1.1.2
ethStatsMacAddress Displays the MAC address.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetString Type Constraints: range: 6	.1.3.6.1.4.1.1966.12.1.41.1.1.3
ethStatsStatus Displays the Ethernet status: 1 is down and 2 is up.	Enumeration Enumerated Values: 1 down 2 up	.1.3.6.1.4.1.1966.12.1.41.1.1.4
ethStatsBroadcast ethStatsBroadcast	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.5
ethStatsDebug ethStatsDebug	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.6
ethStatsLoopback ethStatsLoopback	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.7
ethStatsPointtoPoint ethStatsPointtoPoint	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.8
ethStatsNoTrailers ethStatsNoTrailers	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.9
ethStatsRunning ethStatsRunning	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.10
ethStatsNoArp ethStatsNoArp	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.11
ethStatsPromiscuous ethStatsPromiscuous	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.12
ethStatsRxMulticast ethStatsRxMulticast	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.13
ethStatsMasterLoadBalancer ethStatsMasterLoadBalancer	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.14
ethStatsSlaveLoadBalancer ethStatsSlaveLoadBalancer	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.15
ethStatsMulticast ethStatsMulticast	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.16
ethStatsSetMedia ethStatsSetMedia	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.17
ethStatsAutoMedia ethStatsAutoMedia	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.18
ethStatsDynamic ethStatsDynamic	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.41.1.1.19
ethStatsLocalAddress ethStatsLocalAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.41.1.1.20
ethStatsSubnetMask ethStatsSubnetMask	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.41.1.1.21
ethStatsBroadcastAddress ethStatsBroadcastAddress	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.41.1.1.22
ethStatsMtu ethStatsMtu	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.23
ethStatsTxQLen ethStatsTxQLen	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.24
ethStatsRxBytes ethStatsRxBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.25
ethStatsTxBytes ethStatsTxBytes	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.26
ethStatsRxPackets ethStatsRxPackets	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.27
ethStatsTxPackets ethStatsTxPackets	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.28
ethStatsRxErrors ethStatsRxErrors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.29
ethStatsTxPktErrors ethStatsTxPktErrors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.30
ethStatsRxDroppedPkts ethStatsRxDroppedPkts	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.31
ethStatsTxDroppedPkts ethStatsTxDroppedPkts	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.32
ethStatsRxOverruns ethStatsRxOverruns	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.33
ethStatsTxOverruns ethStatsTxOverruns	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.34
ethStatsRxFrameErrs ethStatsRxFrameErrs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.35
ethStatsTxCarrierErrs ethStatsTxCarrierErrs	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.36
ethStatsCollisions ethStatsCollisions	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.41.1.1.37

modbusSlaveTCPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.1 · 1 row entry · 3 columns

Open in standard view

Modbus TCP Slave Statistics Table.

modbusSlaveTCPStatsEntry entry .1.3.6.1.4.1.1966.12.1.43.1.1

An entry in the Modbus/TCP Slave statistics table, each relating to a serial port.

Indexes

modbusSlaveTCPStatsPortIndex

Column	Syntax	OID
modbusSlaveTCPStatsPortIndex modbusSlaveTCPStatsPortIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.1.1.1
modbusSlaveTCPStatsSerialMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumeration Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.43.1.1.2
modbusSlaveTCPStatsSerialFrameErrors Modbus serial port frame errors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.1.1.3

modbusMasterTCPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.2 · 1 row entry · 3 columns

Open in standard view

Modbus TCP Master Statistics Table.

modbusMasterTCPStatsEntry entry .1.3.6.1.4.1.1966.12.1.43.2.1

An entry in the Modbus/TCP Master statistics table, each relating to a serial port.

Indexes

modbusMasterTCPStatsPortIndex

Column	Syntax	OID
modbusMasterTCPStatsPortIndex modbusMasterTCPStatsPortIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.2.1.1
modbusMasterTCPStatsSerialMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumeration Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.43.2.1.2
modbusMasterTCPStatsSerialFrameErrors Modbus serial port frame errors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.2.1.3

modbusSlaveUDPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.3 · 1 row entry · 3 columns

Open in standard view

Modbus UDP Slave Statistics Table.

modbusSlaveUDPStatsEntry entry .1.3.6.1.4.1.1966.12.1.43.3.1

An entry in the Modbus/UDP Slave statistics table, each relating to a serial port.

Indexes

modbusSlaveUDPStatsPortIndex

Column	Syntax	OID
modbusSlaveUDPStatsPortIndex modbusSlaveUDPStatsPortIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.3.1.1
modbusSlaveUDPStatsSerialMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumeration Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.43.3.1.2
modbusSlaveUDPStatsSerialFrameErrors Modbus serial port frame errors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.3.1.3

modbusMasterUDPStatsTable

table

.1.3.6.1.4.1.1966.12.1.43.4 · 1 row entry · 3 columns

Open in standard view

Modbus UDP Master Statistics Table.

modbusMasterUDPStatsEntry entry .1.3.6.1.4.1.1966.12.1.43.4.1

An entry in the Modbus/UDP Master statistics table, each relating to a serial port.

Indexes

modbusMasterUDPStatsPortIndex

Column	Syntax	OID
modbusMasterUDPStatsPortIndex modbusMasterUDPStatsPortIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.4.1.1
modbusMasterUDPStatsSerialMode Modbus serial device's mode: 0: RTU; 1: ASCII.	Enumeration Enumerated Values: 0 rtu 1 ascii	.1.3.6.1.4.1.1966.12.1.43.4.1.2
modbusMasterUDPStatsSerialFrameErrors Modbus serial port frame errors	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.4.1.3

modbusSlaveTCPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.6 · 1 row entry · 9 columns

Open in standard view

Modbus TCP Slave Gateway Statistics Table.

modbusSlaveTCPStatsGatewayEntry entry .1.3.6.1.4.1.1966.12.1.43.6.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusSlaveTCPStatsGatewayPortIndex modbusSlaveTCPStatsGatewayUIDIndex

Column	Syntax	OID
modbusSlaveTCPStatsGatewayPortIndex The port number index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.6.1.1
modbusSlaveTCPStatsGatewayUIDIndex The UID index	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.6.1.2
modbusSlaveTCPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.43.6.1.3
modbusSlaveTCPStatsGatewayUID The UID.	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.6.1.4
modbusSlaveTCPStatsGatewayRemotePortNumber The remote TCP/UDP port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.43.6.1.5
modbusSlaveTCPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.6.1.6
modbusSlaveTCPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.6.1.7
modbusSlaveTCPStatsGatewayExceptions the exceptions count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.6.1.8
modbusSlaveTCPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.6.1.9

modbusMasterTCPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.7 · 1 row entry · 9 columns

Open in standard view

Modbus Master TCP Gateway Statistics Table.

modbusMasterTCPStatsGatewayEntry entry .1.3.6.1.4.1.1966.12.1.43.7.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusMasterTCPStatsGatewayPortIndex modbusMasterTCPStatsGatewayUIDIndex

Column	Syntax	OID
modbusMasterTCPStatsGatewayPortIndex The port number index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.7.1.1
modbusMasterTCPStatsGatewayUIDIndex The UID index	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.7.1.2
modbusMasterTCPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.43.7.1.3
modbusMasterTCPStatsGatewayUID The UID.	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.7.1.4
modbusMasterTCPStatsGatewayRemotePortNumber the remote TCP/UDP port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.43.7.1.5
modbusMasterTCPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.7.1.6
modbusMasterTCPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.7.1.7
modbusMasterTCPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.7.1.8
modbusMasterTCPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.7.1.9

modbusSlaveUDPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.8 · 1 row entry · 9 columns

Open in standard view

Modbus UDP Slave Gateway Statistics Table.

modbusSlaveUDPStatsGatewayEntry entry .1.3.6.1.4.1.1966.12.1.43.8.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusSlaveUDPStatsGatewayPortIndex modbusSlaveUDPStatsGatewayUIDIndex

Column	Syntax	OID
modbusSlaveUDPStatsGatewayPortIndex The port number index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.8.1.1
modbusSlaveUDPStatsGatewayUIDIndex The UID index	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.8.1.2
modbusSlaveUDPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.43.8.1.3
modbusSlaveUDPStatsGatewayUID The UID.	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.8.1.4
modbusSlaveUDPStatsGatewayRemotePortNumber the remote TCP/UDP port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.43.8.1.5
modbusSlaveUDPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.8.1.6
modbusSlaveUDPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.8.1.7
modbusSlaveUDPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.8.1.8
modbusSlaveUDPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.8.1.9

modbusMasterUDPStatsGatewayTable

table

.1.3.6.1.4.1.1966.12.1.43.9 · 1 row entry · 9 columns

Open in standard view

Modbus UDP Master Gateway Statistics Table.

modbusMasterUDPStatsGatewayEntry entry .1.3.6.1.4.1.1966.12.1.43.9.1

An entry in the modbusStatsGatewayTable.

Indexes

modbusMasterUDPStatsGatewayPortIndex modbusMasterUDPStatsGatewayUIDIndex

Column	Syntax	OID
modbusMasterUDPStatsGatewayPortIndex The port number index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.43.9.1.1
modbusMasterUDPStatsGatewayUIDIndex The UID index	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.9.1.2
modbusMasterUDPStatsGatewayRemoteIP The remote slave/master IP address.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.43.9.1.3
modbusMasterUDPStatsGatewayUID The UID.	Integer32 Constraints: range: 1-247	.1.3.6.1.4.1.1966.12.1.43.9.1.4
modbusMasterUDPStatsGatewayRemotePortNumber The remote TCP/UDP port number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.43.9.1.5
modbusMasterUDPStatsGatewayCommands The commands count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.9.1.6
modbusMasterUDPStatsGatewayResponses The response count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.9.1.7
modbusMasterUDPStatsGatewayExceptions The exceptions count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.9.1.8
modbusMasterUDPStatsGatewayFrameErrors The frame errors count.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1966.12.1.43.9.1.9

ioUdpTable

table

.1.3.6.1.4.1.1966.12.1.45.1.5.3 · 1 row entry · 6 columns

Open in standard view

Port UDP Table.

ioUdpEntry entry .1.3.6.1.4.1.1966.12.1.45.1.5.3.1

An entry in the ioUdpEntry, each relating to a port.

Indexes

ioUdpEntryIndex

Column	Syntax	OID
ioUdpEntryIndex ioUdpNumber	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.1
ioUdpEntryEnable Enable/disable this UDP entry	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.2
ioUdpEntryStartAddress The first host IP address in the range of IP addresses (for IPv4 or IPv6) that the Device Server send messages to	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.3
ioUdpEntryEndAddress The last host IP address in the range of IP addresses (for IPv4, not required for IPv6) that the Device Server will send messages to.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.4
ioUdpEntryPort The port that the Device Server will use to relay messages to servers/hosts.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.5
ioUdpEntryTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.1.5.3.1.6

ioAnalogCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.1.1 · 1 row entry · 11 columns

Open in standard view

ioAnalogCfgTable.

ioAnalogCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1

An entry in the ioAnalogCfgTable

Indexes

ioAnalogChannelIndex

Column	Syntax	OID
ioAnalogChannelIndex I/O analog channel resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.1
ioAnalogCfgStatus NOTE: This object also applies to the corresponding rows in ioAnalogAlarmCfgTable. e.g. If changes are submitted to row 1 of this table (i.e. channel 1), then changes will also be submitted for all rows in ioAnalogAlar…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.2
ioAnalogCfgEnable Enable/disable this analog I/O resource	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.3
ioAnalogCfgDescription Description for the I/O resource	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.4
ioAnalogCfgType Analog I/O resource type. For current and voltage types, please note that the corresponding hardware jumpers must be set accordingly.	Enumerationr/w Enumerated Values: 1 none 2 rtd 3 thermocouple 4 current 5 voltage	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.5
ioAnalogCfgRtdRange Range for RTD analog I/O	Enumerationr/w Enumerated Values: 1 pt100A385RangeMinus50to150 2 pt100A385Range0to100 3 pt100A385Range0to200 4 pt100A385Range0to400 5 pt100A385RangeMinus200to200 6 pt100A392RangeMinus50to150 7 pt100A392Range0to100 8 pt100A392Range0to200 9 pt100A392Range0to400 10 pt100A392RangeMinus200to200 11 pt1000A385RangeMinus40to160 12 nickelRangeMinus80to100 13 nickelRange0to100	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.6
ioAnalogCfgThermRange Range for thermocouple analog I/O	Enumerationr/w Enumerated Values: 1 j 2 k 3 t 4 e 5 r 6 s 7 b	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.7
ioAnalogCfgCurrentRange Range for current-measuring analog I/O	Enumerationr/w Enumerated Values: 1 ampsRange0to20 2 ampsRange4to20	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.8
ioAnalogCfgVoltageRange Range for voltage-measuring analog I/O	Enumerationr/w Enumerated Values: 1 voltsRangeMinus10To10 2 voltsRangeMinus5To5 3 voltsRangeMinus1To1 4 millivoltsRangeMinus500to500 5 millivoltsRangeMinus150to150	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.9
ioAnalogCfgAlarmTrigger Analog I/O alarm trigger type	Enumerationr/w Enumerated Values: 1 disabled 2 low 3 high	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.10
ioAnalogCfgAlarmClearMode Analog I/O alarm clear mode	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.1966.12.1.45.2.1.1.1.1.11

ioAnalogAlarmCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.1.2 · 1 row entry · 8 columns

Open in standard view

ioAnalogAlarmCfgTable.

ioAnalogAlarmCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1

An entry in the ioAnalogAlarmCfgTable

Indexes

ioAnalogAlarmCfgChannelIndex ioAnalogAlarmCfgEntryIndex

Column	Syntax	OID
ioAnalogAlarmCfgChannelIndex Channel Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.1
ioAnalogAlarmCfgEntryIndex Entry Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.2
ioAnalogCfgAlarmEnable Enable/disable I/O analog alarm entry	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.3
ioAnalogCfgAlarmTriggerLevel Trigger level for I/O analog alarm (floating point value)	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.4
ioAnalogCfgAlarmClearLevel Clear level for non-latching I/O analog alarm (floating point value)	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.5
ioAnalogCfgAlarmEmail Enable/disable email notification on triggered analog alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.6
ioAnalogCfgAlarmSyslog Enable/disable syslog notification on triggered analog alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.7
ioAnalogCfgAlarmSNMP Enable/disable SNMP trap notification on triggered analog alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.1.2.1.8

ioDigitalCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.1 · 1 row entry · 20 columns

Open in standard view

ioDigitalCfgTable.

ioDigitalCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1

An entry in the ioDigitalCfgTable

Indexes

ioDigitalChannelIndex

Column	Syntax	OID
ioDigitalChannelIndex I/O digital channel resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.1
ioDigitalCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.2
ioDigitalCfgResourceType Set your digital I/O resource type to Input or Output using this object. Please note that the corresponding hardware jumpers must be set accordingly.	Enumerationr/w Enumerated Values: 2 input 3 output	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.3
ioDigitalCfgEnable Enable/disable this digital I/O channel	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.4
ioDigitalCfgDescription Description for this digital I/O	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.5
ioDigitalInputCfgLatch Digital Input: Latch type	Enumerationr/w Enumerated Values: 1 disabled 2 inactiveToActive 3 activeToInactive	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.6
ioDigitalInputCfgInvertSignal Digital Input: Enable/disable signal inversion	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.7
ioDigitalInputCfgAlarmTrigger Digital Input: Alarm trigger type	Enumerationr/w Enumerated Values: 1 disabled 2 low 3 high	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.8
ioDigitalInputCfgAlarmClear Digital Input: Clear alarm - manual/automatic	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.9
ioDigitalInputCfgAlarmEmail Digital Input: Enable/disable email alert on triggered alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.10
ioDigitalInputCfgAlarmSyslog Digital Input: Enable/disable syslog alert on triggered alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.11
ioDigitalInputCfgAlarmSNMP Digital Input: Enable/disable SNMP trap on triggered alarm	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.12
ioDigitalOutputCfgType Digital Output: Output type	Enumerationr/w Enumerated Values: 1 sink 2 source 3 sinkAndSource	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.13
ioDigitalOutputCfgMode Digital Output: Output mode	Enumerationr/w Enumerated Values: 1 manual 2 pulse 3 inactiveToActiveDelay 4 activeToInactiveDelay	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.14
ioDigitalOutputCfgPulseMode Digital Output: Pulse mode (counted or continuous)	Enumerationr/w Enumerated Values: 1 continuous 2 counted	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.15
ioDigitalOutputCfgPulseCount Digital Output: Pulse count (only applies to counted pulse mode)	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.16
ioDigitalOutputCfgInactiveSignalWidth Digital Output: Inactive signal width, in 100 ms units (only applies to pulse mode)	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.17
ioDigitalOutputCfgActiveSignalWidth Digital Output: Active signal width, in 100 ms units (only applies to pulse mode)	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.18
ioDigitalOutputCfgDelay Digital Output: Delay time, in 100 ms units (only applies to delay mode)	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.19
ioDigitalOutputCfgFailsafe Digital Output: Failsafe action - choose the action that will take place when the failsafe timer expires	Enumerationr/w Enumerated Values: 1 none 2 activateOutput 3 deactivateOutput	.1.3.6.1.4.1.1966.12.1.45.2.1.2.1.1.20

ioDigitalExtensionCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.2 · 1 row entry · 10 columns

Open in standard view

I/O Digial Extention Table.

ioDigitalExtensionCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1

An entry in the ioDigitalExtensionCfgTable

Indexes

ioDigitalExtCfgChanIndex

Column	Syntax	OID
ioDigitalExtCfgChanIndex I/O resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.1
ioDigitalExtCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.2
ioDigitalExtCfgEnable Enable/disable this digital I/O Extension	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.3
ioDigitalExtCfgConnMethod Defines the type of connection being established Listen for connection, Connect to Host, or Local	Enumerationr/w Enumerated Values: 0 listen 1 connect 2 local	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.4
ioDigitalExtCfgHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.5
ioDigitalExtCfgPort The port number the target host is listening on for incoming/outgoing connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.6
ioDigitalExtCfgLinkChannel The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.7
ioDigitalExtCfgKeepalive Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.8
ioDigitalExtCfgMultiHost Allows user to configure the multihost for client/server initiated connections	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.9
ioDigitalExtCfgTunnelName The name of the HTTP tunnel associated with the Rlogin service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.2.2.1.10

ioDigitalMultihostTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.3 · 1 row entry · 3 columns

Open in standard view

I/O Digial Multihost Table.

ioDigitalMultihostEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1

An entry in the ioDigitalMultihostEntry, each relating to digital io channel.

Indexes

ioDigitalMultihostIndex

Column	Syntax	OID
ioDigitalMultihostIndex ioDigitalMultihostIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.1
ioDigitalMultihostStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.2
ioDigitalMultihostMode Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode	Enumerationr/w Enumerated Values: 1 all 2 backup	.1.3.6.1.4.1.1966.12.1.45.2.1.2.3.1.4

ioDigitalMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.4 · 1 row entry · 6 columns

Open in standard view

Multihost outbound table.

ioDigitalMultihostOutboundEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1

An entry in the ioDigitalMultihostOutboundTable.

Indexes

ioDigitalMultihostChanIndex ioDigitalMultihostOutboundIndex

Column	Syntax	OID
ioDigitalMultihostChanIndex Channel Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.1
ioDigitalMultihostOutboundIndex The outbound entry number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.2
ioDigitalMultihostOutboundStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.3
ioDigitalMultihostOutboundHostID The host name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.4
ioDigitalMultihostOutboundTcpPort The host TCP port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.5
ioDigitalMultihostOutboundTunnel The HTTP tunnel associated with this host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.2.4.1.6

ioDigitalSSLTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.5 · 1 row entry · 14 columns

Open in standard view

io SSL Table.

ioDigitalSSLEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1

An entry in the ioDigitalSSLEntry, each relating to a io.

Indexes

ioDigitalSSLIndex

Column	Syntax	OID
ioDigitalSSLIndex io Digital SSL Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.1
ioDigitalSSLStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.2
ioDigitalSSLEnabled Enables/disables SSL.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.3
ioDigitalSSLuseServer Uses the SSL/TLS server configuration for the line.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.4
ioDigitalSSLVersion Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it will try an SSLv2 connection. TLSv1-The connection wil…	Enumerationr/w Enumerated Values: 1 any 2 tlsv1 3 sslv3	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.5
ioDigitalSSLType Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.	Enumerationr/w Enumerated Values: 1 client 2 server	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.6
ioDigitalSSLVerifyPeerCertificate Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.7
ioDigitalSSLCountry A two character country code; for example, US.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.8
ioDigitalSSLStateProv Up to a 128 character entry for the state/province; for example, IL.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.9
ioDigitalSSLLocality Up to a 128 character entry for the location; for example, a city.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.10
ioDigitalSSLOrganisation Up to a 64 character entry for the organization; for example, Accounting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.11
ioDigitalSSLOrganisationUnit Up to a 64 character entry for the unit in the organization; for example, Payroll.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.12
ioDigitalSSLCommonName Up to a 64 character entry for common name; for example, the host name or fully qualified domain name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.13
ioDigitalSSLEmail Up to a 64 character entry for an email address; for example, acct@anycompany.com.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.2.5.1.14

ioDigitalSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.2.6 · 1 row entry · 8 columns

Open in standard view

Digital SSL Cipher.

ioDigitalSSLCipherEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioDigitalSSLChanIndex ioDigitalSSLCipherIndex

Column	Syntax	OID
ioDigitalSSLChanIndex The io number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.1
ioDigitalSSLCipherIndex The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.2
ioDigitalSSLCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.3
ioDigitalSSLCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.4
ioDigitalSSLCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.5
ioDigitalSSLCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.6
ioDigitalSSLCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.7
ioDigitalSSLCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.45.2.1.2.6.1.8

ioRelayCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.1 · 1 row entry · 11 columns

Open in standard view

ioRelayCfgTable.

ioRelayCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1

An entry in the ioRelayCfgTable

Indexes

ioRelayChannelIndex

Column	Syntax	OID
ioRelayChannelIndex I/O relay channel resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.1
ioRelayCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.2
ioRelayCfgEnable Enable/disable this Relay I/O channel	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.3
ioRelayCfgDescription Description for this relay	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.4
ioRelayCfgMode Relay output mode	Enumerationr/w Enumerated Values: 1 manual 2 pulse 3 inactiveToActiveDelay 4 activeToInactiveDelay	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.5
ioRelayCfgPulseMode Relay pulse mode (only applies when output mode is set to 'pulse'	Enumerationr/w Enumerated Values: 1 continuous 2 counted	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.6
ioRelayCfgPulseCount Relay pulse count; only applies for counted pulse mode	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.7
ioRelayCfgInactiveSignalWidth Relay inactive signal width in 100 ms units; only applies to pulse mode	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.8
ioRelayCfgActiveSignalWidth Relay active signal width in 100 ms units; only applies to pulse mode	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.9
ioRelayCfgDelay Relay pulse delay, in 100 ms units; only applies to delay mode	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.10
ioRelayCfgFailsafe Action to take when the failsafe timer expires	Enumerationr/w Enumerated Values: 1 none 2 activateOutput 3 deactivateOutput	.1.3.6.1.4.1.1966.12.1.45.2.1.3.1.1.11

ioRelayExtensionCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.2 · 1 row entry · 10 columns

Open in standard view

ioRelayExtensionCfgTable

ioRelayExtensionCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1

An entry in the ioReleayExtensionCfgTable

Indexes

ioRelayExtCfgChanIndex

Column	Syntax	OID
ioRelayExtCfgChanIndex I/O Relay channel resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.1
ioRelayExtCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.2
ioRelayExtCfgEnable Enable/disable this digital I/O Extension	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.3
ioRelayExtCfgConnMethod Defines the type of connection being established Listen for connection, Connect to Host, or Local	Enumerationr/w Enumerated Values: 0 listen 1 connect 2 local	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.4
ioRelayExtCfgHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.5
ioRelayExtCfgPort The port number the target host is listening on for incoming/outgoing connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.6
ioRelayExtCfgLinkChannel The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.7
ioRelayExtCfgKeepalive Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.8
ioRelayExtCfgMultiHost Allows user to configure the multihost for client/server initiated connections	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.9
ioRelayExtCfgTunnelName The name of the HTTP tunnel associated with the Rlogin service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.3.2.1.10

ioRelayMultihostTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.3 · 1 row entry · 3 columns

Open in standard view

I/O Multihost Table.

ioRelayMultihostEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1

An entry in the ioRelayMultihostEntry, each relating to digital io channel.

Indexes

ioRelayMultihostIndex

Column	Syntax	OID
ioRelayMultihostIndex ioRelayMultihostChanIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.1
ioRelayMultihostStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.2
ioRelayMultihostMode Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode	Enumerationr/w Enumerated Values: 1 all 2 backup	.1.3.6.1.4.1.1966.12.1.45.2.1.3.3.1.4

ioRelayMultihostOutboundTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.4 · 1 row entry · 6 columns

Open in standard view

Multihost outbound table.

ioRelayMultihostOutboundEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1

An entry in the ioRelayMultihostOutboundTable.

Indexes

ioRelayMultihostChanIndex ioRelayMultihostOutboundIndex

Column	Syntax	OID
ioRelayMultihostChanIndex Channel Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.1
ioRelayMultihostOutboundIndex The outbound entry number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.2
ioRelayMultihostOutboundStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.3
ioRelayMultihostOutboundHostID The host name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.4
ioRelayMultihostOutboundTcpPort The host TCP port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.5
ioRelayMultihostOutboundTunnel The HTTP tunnel associated with this host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.3.4.1.6

ioRelaySSLTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.5 · 1 row entry · 14 columns

Open in standard view

io Relay SSL Table.

ioRelaySSLEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1

An entry in the ioRelaySSLEntry, each relating to a io.

Indexes

ioRelaySSLIndex

Column	Syntax	OID
ioRelaySSLIndex io Relay SSL Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.1
ioRelaySSLStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.2
ioRelaySSLEnabled Enables/disables SSL.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.3
ioRelaySSLuseServer Uses the SSL/TLS server configuration for the line.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.4
ioRelaySSLVersion Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it will try an SSLv2 connection. TLSv1-The connection wil…	Enumerationr/w Enumerated Values: 1 any 2 tlsv1 3 sslv3	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.5
ioRelaySSLType Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.	Enumerationr/w Enumerated Values: 1 client 2 server	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.6
ioRelaySSLVerifyPeerCertificate Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.7
ioRelaySSLCountry A two character country code; for example, US.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.8
ioRelaySSLStateProv Up to a 128 character entry for the state/province; for example, IL.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.9
ioRelaySSLLocality Up to a 128 character entry for the location; for example, a city.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.10
ioRelaySSLOrganisation Up to a 64 character entry for the organization; for example, Accounting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.11
ioRelaySSLOrganisationUnit Up to a 64 character entry for the unit in the organization; for example, Payroll.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.12
ioRelaySSLCommonName Up to a 64 character entry for common name; for example, the host name or fully qualified domain name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.13
ioRelaySSLEmail Up to a 64 character entry for an email address; for example, acct@anycompany.com.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.3.5.1.14

ioRelaySSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.3.6 · 1 row entry · 8 columns

Open in standard view

SSL CIpher.

ioRelaySSLCipherEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioRelaySSLChanIndex ioRelaySSLCipherIndex

Column	Syntax	OID
ioRelaySSLChanIndex The io number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.1
ioRelaySSLCipherIndex The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.2
ioRelaySSLCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.3
ioRelaySSLCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.4
ioRelaySSLCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.5
ioRelaySSLCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.6
ioRelaySSLCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.7
ioRelaySSLCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.45.2.1.3.6.1.8

ioLineSignalCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.1 · 1 row entry · 14 columns

Open in standard view

ioLineSignalCfgTable.

ioLineSignalCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1

An entry in the ioLineSignalCfgTable

Indexes

ioLineSignalCfgPortIndex ioLineSignalCfgSignalIndex

Column	Syntax	OID
ioLineSignalCfgPortIndex Index of the associated serial port	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.1
ioLineSignalCfgSignalIndex Index of the associate line signal	Enumeration Enumerated Values: 1 dsr 2 dcd 3 cts 4 dtr 5 rts	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.2
ioLineSignalCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.3
ioLineSignalCfgResourceType Signifies whether this resource is input or output	Enumeration Enumerated Values: 2 input 3 output	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.4
ioLineSignalCfgEnable Enable/disable this resource	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.5
ioLineSignalCfgDescription Description for this resource	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.6
ioLineSignalInputCfgLatch Line Signal (input): Latch mode	Enumerationr/w Enumerated Values: 1 disabled 2 inactiveToActive 3 activeToInactive	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.7
ioLineSignalInputCfgInvertSignal Line Signal (input): Enable/disable signal inversion	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.8
ioLineSignalInputCfgAlarmTrigger Line Signal (input): Alarm trigger type	Enumerationr/w Enumerated Values: 1 disabled 2 low 3 high	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.9
ioLineSignalInputCfgAlarmClear Line Signal (input): Alarm clear type	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.10
ioLineSignalInputCfgAlarmEmail Line Signal (input): Enable/disable email alert on alarm trigger	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.11
ioLineSignalInputCfgAlarmSyslog Line Signal (input): Enable/disable syslog alert on alarm trigger	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.12
ioLineSignalInputCfgAlarmSNMP Line Signal (input): Enable/disable SNMP alert on alarm trigger	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.13
ioLineSignalOutputCfgFailsafe Line Signal (output): Action to take when failsafe timer expires	Enumerationr/w Enumerated Values: 1 none 2 activateOutput 3 deactivateOutput	.1.3.6.1.4.1.1966.12.1.45.2.1.4.1.1.14

ioLineExtensionSigCfgTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.2 · 1 row entry · 10 columns

Open in standard view

ioLineExtensionSigCfgTable

ioLineExtensionSigCfgEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1

An entry in the ioLineExtensionCfgTable

Indexes

ioLineExtSigCfgChanIndex

Column	Syntax	OID
ioLineExtSigCfgChanIndex I/O resource index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.1
ioLineExtSigCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.2
ioLineExtSigCfgEnable Enable/disable this digital I/O Extension	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.3
ioLineExtSigCfgConnMethod Defines the type of connection being established Listen for connection, Connect to Host, or Local	Enumerationr/w Enumerated Values: 0 listen 1 connect 2 local	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.4
ioLineExtSigCfgHost The name of the target host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.5
ioLineExtSigCfgPort The port number the target host is listening on for incoming/outgoing connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.6
ioLineExtSigCfgLinkChannel The Link Channel that device would make a connection with. The link channel is only valid for Local connection. The channel must be digital input	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.7
ioLineExtSigCfgKeepalive Enables a per-connection TCP keepalive feature; after approximately 3 minutes of network connection idle time, the connection will send a gratuitous ACK to the network peer, either ensuring the connection stays active …	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.8
ioLineExtSigCfgMultiHost Allows user to configure the multihost for client/server initiated connections	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.9
ioLineExtSigCfgTunnelName The name of the HTTP tunnel associated with the Rlogin service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.4.2.1.10

ioLineMultihostSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.3 · 1 row entry · 3 columns

Open in standard view

I/O Multihost Table.

ioLineMultihostSigEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1

An entry in the ioLineMultihostEntry, each relating to digital io channel.

Indexes

ioLineMultihostSigIndex

Column	Syntax	OID
ioLineMultihostSigIndex ioLineMultihostSigIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.1
ioLineMultihostSigStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.2
ioLineMultihostModeSig Set multihost operation mode.all:for muliple host list mode. backup: for primary-backup mode	Enumerationr/w Enumerated Values: 1 all 2 backup	.1.3.6.1.4.1.1966.12.1.45.2.1.4.3.1.4

ioLineMultihostOutboundSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.4 · 1 row entry · 6 columns

Open in standard view

Multihost outbound table.

ioLineMultihostOutboundSigEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1

An entry in the ioLineMultihostOutboundTable.

Indexes

ioLineMultihostSigChanIndex ioLineMultihostOutboundSigIndex

Column	Syntax	OID
ioLineMultihostSigChanIndex Channel Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.1
ioLineMultihostOutboundSigIndex The outbound entry number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.2
ioLineMultihostOutboundSigStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.3
ioLineMultihostOutboundSigHostID The host name.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.4
ioLineMultihostOutboundSigTcpPort The host TCP port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.5
ioLineMultihostOutboundSigTunnel The HTTP tunnel associated with this host.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.45.2.1.4.4.1.6

ioLineSSLSigTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.5 · 1 row entry · 14 columns

Open in standard view

io SSL Table.

ioLineSSLSigEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1

An entry in the ioDigitalSSLEntry, each relating to a io.

Indexes

ioLineSSLSigIndex

Column	Syntax	OID
ioLineSSLSigIndex io SSL Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.1
ioLineSSLSigStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.2
ioLineSSLSigEnabled Enables/disables SSL.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.3
ioLineSSLSiguseServer Uses the SSL/TLS server configuration for the line.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.4
ioLineSSLSigVersion Specify whether you want to use: Any-The Device Server will try a TLSv1 connection first. If that fails, it will try an SSLv3 connection. If that fails, it will try an SSLv2 connection. TLSv1-The connection wil…	Enumerationr/w Enumerated Values: 1 any 2 tlsv1 3 sslv3	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.5
ioLineSSLSigType Specify whether the Device Server will act as an SSL/TLS client or server. The default is Client.	Enumerationr/w Enumerated Values: 1 client 2 server	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.6
ioLineSSLSigVerifyPeerCertificate Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the…	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.7
ioLineSSLSigCountry A two character country code; for example, US.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.8
ioLineSSLSigStateProv Up to a 128 character entry for the state/province; for example, IL.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.9
ioLineSSLSigLocality Up to a 128 character entry for the location; for example, a city.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.10
ioLineSSLSigOrganisation Up to a 64 character entry for the organization; for example, Accounting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.11
ioLineSSLSigOrganisationUnit Up to a 64 character entry for the unit in the organization; for example, Payroll.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.12
ioLineSSLSigCommonName Up to a 64 character entry for common name; for example, the host name or fully qualified domain name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.13
ioLineSSLSigEmail Up to a 64 character entry for an email address; for example, acct@anycompany.com.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.45.2.1.4.5.1.14

ioLineSSLSigCipherTable

table

.1.3.6.1.4.1.1966.12.1.45.2.1.4.6 · 1 row entry · 8 columns

Open in standard view

SSL CIpher.

ioLineSSLSigCipherEntry entry .1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1

An entry in the sslCipherTable, each relating to a cipher entry.

Indexes

ioLineSSLSigChanIndex ioLineSSLSigCipherIndex

Column	Syntax	OID
ioLineSSLSigChanIndex The io number	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.1
ioLineSSLSigCipherIndex The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.2
ioLineSSLSigCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.3
ioLineSSLSigCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.4
ioLineSSLSigCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.5
ioLineSSLSigCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.6
ioLineSSLSigCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.7
ioLineSSLSigCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.45.2.1.4.6.1.8

ioAnalogStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.2.1 · 1 row entry · 9 columns

Open in standard view

ioAnalogStatusTable.

ioAnalogStatusEntry entry .1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1

An entry in the ioAnalogStatusTable

Indexes

ioAnalogStatusChannelIndex

Column	Syntax	OID
ioAnalogStatusChannelIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.1
ioAnalogStatusEnabled Enabled	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.2
ioAnalogStatusDescription Description	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.3
ioAnalogFunction kill - Apply configuration changes to this entry	Enumerationr/w Enumerated Values: 1 none 2 kill 6 clearAlarm 7 clearMin 8 clearMax	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.4
ioAnalogStatusInputState Input state.	Enumeration Enumerated Values: 1 normal 2 open 3 short	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.5
ioAnalogStatusValue Current analog input value.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.6
ioAnalogStatusMinimum Minimum analog input value.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.7
ioAnalogStatusMaximum Maximum analog input value.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.8
ioAnalogStatusAlarmLevel Alarm level.	Integer32 Constraints: range: 0-5	.1.3.6.1.4.1.1966.12.1.45.2.2.2.1.1.9

ioDigitalStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.3.1 · 1 row entry · 9 columns

Open in standard view

ioDigitalStatusTable.

ioDigitalStatusEntry entry .1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1

An entry in the ioDigitalStatusTable

Indexes

ioDigitalStatusChannelIndex

Column	Syntax	OID
ioDigitalStatusChannelIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.1
ioDigitalStatusEnabled Enabled	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.2
ioDigitalStatusDescription Description	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.3
ioDigitalStatusType Resource type	Enumeration Enumerated Values: 1 unknown 2 input 3 output	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.4
ioDigitalFunction kill - Apply configuration changes to this entry	Enumerationr/w Enumerated Values: 1 none 2 kill 3 activateOutput 4 deactivateOutput 5 clearInputLatch 6 clearAlarmLatch	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.5
ioDigitalStatusState Digital State. .	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.6
ioDigitalStatusLatchedInputState For digital inputs only.	Enumeration Enumerated Values: 1 none 2 inactiveToActive 3 activeToInactive	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.7
ioDigitalStatusInputAlarm LineSignal State. .	Enumeration Enumerated Values: 1 notTriggered 2 triggered	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.8
ioDigitalStatusExtensionState For digital inputs and outputs only.	Enumeration Enumerated Values: 1 disable 2 enabledDisconnected 3 connected 4 notAvailable	.1.3.6.1.4.1.1966.12.1.45.2.2.3.1.1.9

ioRelayStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.4.1 · 1 row entry · 6 columns

Open in standard view

ioRelayStatusTable.

ioRelayStatusEntry entry .1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1

An entry in the ioRelayStatusTable

Indexes

ioRelayStatusChannelIndex

Column	Syntax	OID
ioRelayStatusChannelIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.1
ioRelayStatusEnabled Enabled	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.2
ioRelayStatusDescription Description	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.3
ioRelayFunction kill - Apply configuration changes to this entry	Enumerationr/w Enumerated Values: 1 none 2 kill 3 activateOutput 4 deactivateOutput	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.4
ioRelayStatusState Relay State. .	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.5
ioRelayStatusExtensionState For digital inputs/outputs/relays only.	Enumeration Enumerated Values: 1 disable 2 enabledDisconnected 3 connected 4 notAvailable	.1.3.6.1.4.1.1966.12.1.45.2.2.4.1.1.6

ioLineSignalStatusTable

table

.1.3.6.1.4.1.1966.12.1.45.2.2.5.1 · 1 row entry · 10 columns

Open in standard view

ioLineSignalStatusTable.

ioLineSignalStatusEntry entry .1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1

An entry in the ioLineSignalStatusTable

Indexes

ioLineSignalStatusPortIndex ioLineSignalStatusSignalIndex

Column	Syntax	OID
ioLineSignalStatusPortIndex Index	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.1
ioLineSignalStatusSignalIndex Index	Enumeration Enumerated Values: 1 dsr 2 dcd 3 cts 4 dtr 5 rts	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.2
ioLineSignalStatusEnabled Enabled	OnOffValue Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.3
ioLineSignalStatusDescription Description	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.4
ioLineSignalStatusType resource type	Enumeration Enumerated Values: 1 unknown 2 input 3 output	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.5
ioLineSignalFunction kill - Apply configuration changes to this entry	Enumerationr/w Enumerated Values: 1 none 2 kill 3 activateOutput 4 deactivateOutput 5 clearInputLatch 6 clearAlarmLatch	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.6
ioLineSignalStatusState LineSignal State. .	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.7
ioLineSignalStatusLatchedInputState LineSignal State. .	Enumeration Enumerated Values: 1 none 2 inactiveToActive 3 activeToInactive	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.8
ioLineSignalStatusInputAlarm LineSignal State. .	Enumeration Enumerated Values: 1 notTriggered 2 triggered	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.9
ioLineSignalStatusExtensionState For serial inputs and outputs only.	Enumeration Enumerated Values: 1 disable 2 enabledDisconnected 3 connected 4 notAvailable	.1.3.6.1.4.1.1966.12.1.45.2.2.5.1.1.10

clusteringTable

table

.1.3.6.1.4.1.1966.12.1.46.1 · 1 row entry · 10 columns

Open in standard view

The Clustering table.

clusteringEntry entry .1.3.6.1.4.1.1966.12.1.46.1.1

An entry in the clusteringEntry, each relating to a port.

Indexes

clusteringIndex

Column	Syntax	OID
clusteringIndex The table entry number.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.46.1.1.1
clusteringStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.46.1.1.2
clusteringServerName The slave server's name.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.1966.12.1.46.1.1.3
clusteringSlaveIP The remote slave server's IP address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.46.1.1.4
clusteringPort The port number on the clustered slave server.	GenericTableIndexr/w Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.46.1.1.5
clusteringPortName The slave server's port name.	OctetStringr/w Constraints: range: 1-54	.1.3.6.1.4.1.1966.12.1.46.1.1.6
clusteringSlavePort The starting TCP port on the slave server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.1966.12.1.46.1.1.7
clusteringMasterPort The starting TCP port on the master server.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.1966.12.1.46.1.1.8
clusteringProtocol The protocol used to connect between the slave and server.	Enumerationr/w Enumerated Values: 1 telnet 2 ssh 3 notUsed	.1.3.6.1.4.1.1966.12.1.46.1.1.9
clusteringSlaveIPTunnel The HTTP tunnel associated with the slave IP	OctetStringr/w Constraints: range: 1-14	.1.3.6.1.4.1.1966.12.1.46.1.1.10

dynamicDNSSSLCipherTable

table

.1.3.6.1.4.1.1966.12.1.47.18 · 1 row entry · 7 columns

Open in standard view

SSL CIpher.

dynamicDNSSSLCipherEntry entry .1.3.6.1.4.1.1966.12.1.47.18.1

An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry.

Indexes

dynamicDNSSSLCipherPriority

Column	Syntax	OID
dynamicDNSSSLCipherPriority The cipher priority. 1- highest 5 - lowest.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.1966.12.1.47.18.1.1
dynamicDNSSSLCipherStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.47.18.1.2
dynamicDNSSSLCipherEncryption SSL Encryption. None is not allowed for priority 1. Any will use the first encryption format that can be negotiated. The default is any.	Enumerationr/w Enumerated Values: 1 none 2 any 3 aes 4 tripledes 5 des 6 arctwo 7 arcfour	.1.3.6.1.4.1.1966.12.1.47.18.1.3
dynamicDNSSSLCipherKeySizeMin The minimum key size value that will be used for the specified encryption type. The default is 40.	Enumerationr/w Enumerated Values: 1 min40 2 min56 3 min64 4 min128 5 min168 6 min256	.1.3.6.1.4.1.1966.12.1.47.18.1.4
dynamicDNSSSLCipherKeySizeMax The maximum key size value that will be used for the specified encryption type. The default is 256.	Enumerationr/w Enumerated Values: 1 max40 2 max56 3 max64 4 max128 5 max168 6 max256	.1.3.6.1.4.1.1966.12.1.47.18.1.5
dynamicDNSSSLCipherKeyExchange The type of key to exchange for the encryption format: Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E…	Enumerationr/w Enumerated Values: 1 any 2 rsa 3 edhrsa 4 edhdss 5 adh	.1.3.6.1.4.1.1966.12.1.47.18.1.6
dynamicDNSSSLCipherHMAC Select the key-hashing for message authentication method for your encryption type: Any, MD5, or SHA1. The default is Any.	Enumerationr/w Enumerated Values: 1 any 2 sha 3 md5	.1.3.6.1.4.1.1966.12.1.47.18.1.7

vmodemPhoneInfoTable

table

.1.3.6.1.4.1.1966.12.1.49.1 · 1 row entry · 7 columns

Open in standard view

The vmodem phone  info table.

vmodemPhoneInfoEntry entry .1.3.6.1.4.1.1966.12.1.49.1.1

An entry in the vmodemPhoneInfoTable, each relating to a host.

Indexes

vmodemPhoneIndex

Column	Syntax	OID
vmodemPhoneIndex The table entry number for this vmodem phone table	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.49.1.1.1
vmodemPhoneStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.49.1.1.2
vmodemPhone The modem name used for this modem entry. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.1966.12.1.49.1.1.3
vmodemPhoneIP The IP address corresponding to a phone number. If the IP address is blank, then the Host IP address will be used	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.49.1.1.4
vmodemPhonePort TCP port number corresponding to a phone number.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.49.1.1.5
vmodemPhoneTunnelName The name of the HTTP tunnel associated with this service.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.49.1.1.6
vmodemPhoneHostName The name of a configured host that will correspond to the phone number.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.49.1.1.7

ipsecTable

table

.1.3.6.1.4.1.1966.12.1.50.1 · 1 row entry · 24 columns

Open in standard view

The IPsec table.

ipsecEntry entry .1.3.6.1.4.1.1966.12.1.50.1.1

An entry in the ipsecEntry, each relating to a IPsec tunnel.

Indexes

ipsecIndex

Column	Syntax	OID
ipsecIndex The table entry number for this IPsec tunnel.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.50.1.1.1
ipsecStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.50.1.1.2
ipsecName The IPsec tunnel name. To delete an IPsec, set this field to blank. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.1966.12.1.50.1.1.3
ipsecAuthMethod The type of authentication Method that the IPsec tunnel will use	Enumerationr/w Enumerated Values: 0 sharedSecret 2 rsaSignature 3 x509Certificate	.1.3.6.1.4.1.1966.12.1.50.1.1.4
ipsecSecret The IPsec tunnel secret. This applies to all IPsec and and L2TP/IPsec tunnels	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.1966.12.1.50.1.1.5
ipsecLocalDevice Define local device (the Device Server) either in left or right	Enumerationr/w Enumerated Values: 1 left 2 right	.1.3.6.1.4.1.1966.12.1.50.1.1.6
ipsecBootaction Select one of the boot action from: start, add or ignore.	Enumerationr/w Enumerated Values: 1 start 2 add 3 ignore	.1.3.6.1.4.1.1966.12.1.50.1.1.7
ipsecLocalIpAddress IPv4/IPv6 or FQDN(Fully Qualified Domain Name)	OctetStringr/w Constraints: range: 0-126	.1.3.6.1.4.1.1966.12.1.50.1.1.8
ipsecLocalExternalIpAddress External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T through a router/firewall. Only Available if Nat-T is on.	OctetStringr/w Constraints: range: 0-126	.1.3.6.1.4.1.1966.12.1.50.1.1.9
ipsecLocalNextHop The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured in the IOLAN's->Network->Gateways settings.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.50.1.1.10
ipsecLocalHostNetwork The network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.50.1.1.11
ipsecLocalNetmaskBit If the local host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.50.1.1.12
ipsecRemoteIpAddress IPv4/IPv6 or FQDN(Fully Qualified Domain Name)	OctetStringr/w Constraints: range: 0-126	.1.3.6.1.4.1.1966.12.1.50.1.1.13
ipsecRemoteExternalIpAddress External/unique IPv4/IPv6 address or Full Qualified Domain Name(FQDN) when using NAT_T throught a router/firewall. Only Available if Nat-T is on.	OctetStringr/w Constraints: range: 0-126	.1.3.6.1.4.1.1966.12.1.50.1.1.14
ipsecRemoteNextHop The IP address of the router/gateway to send this packet to. Must be on the same subnet as the IP Address. Leave blank if using the default gateway configured in the IOLAN's->Network->Gateways settings.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.50.1.1.15
ipsecRemoteHostNetwork The host/network we are trying to create a VPN connection for. Leave blank when creating a host to host VPN connection.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.50.1.1.16
ipsecRemoteNetmaskBit If the remote host/network address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bits range is 0-128.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.50.1.1.17
ipsecRemoteValCritCountry A two character country code; for example, US.	OctetStringr/w Constraints: range: 0-2	.1.3.6.1.4.1.1966.12.1.50.1.1.18
ipsecRemoteValCritStateProv Up to a 128 character entry for the state/province; for example, IL.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.50.1.1.19
ipsecRemoteValCritLocality Up to a 128 character entry for the location; for example, a city.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.50.1.1.20
ipsecRemoteValCritOrganisation Up to a 64 character entry for the organization; for example, Accounting.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.50.1.1.21
ipsecRemoteValCritOrganisationUnit Up to a 64 character entry for the unit in the organization; for example, Payroll.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.50.1.1.22
ipsecRemoteValCritCommonName Up to a 64 character entry for common name; for example, the host name or fully qualified domain name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.1966.12.1.50.1.1.23
ipsecRemoteValCritEmail Up to a 64 character entry for an email address; for example, acct@anycompany.com.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.50.1.1.24

ipv6AddressEth1Table

table

.1.3.6.1.4.1.1966.12.1.51.2 · 1 row entry · 6 columns

Open in standard view

Ethernet 1 IPv6 custom address table.

ipv6AddressEth1Entry entry .1.3.6.1.4.1.1966.12.1.51.2.1

Ethernet 1 IPv6 custom entry.

Indexes

ipv6AddressEth1Index

Column	Syntax	OID
ipv6AddressEth1Index Ethernet 1 custom IPv6 address index.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.51.2.1.1
ipv6AddressEth1Status When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.51.2.1.2
ipv6AddressEth1Addr (Ethernet 1) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address (must turn ipv6AddressAuto1 on) or enter a specific IPv6 address.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.51.2.1.3
ipv6AddressEth1PrefixBits (Ethernet 1) The IPv6 prefix bits of either the network or IPv6 address.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.51.2.1.4
ipv6AddressEth1Auto (Ethernet 1) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.2.1.5
ipv6AddressEth1SendAdvertise (Ethernet 1) When on, the Device Server will include the IPv6 address in router advertisements.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.2.1.6

ipv6AddressEth2Table

table

.1.3.6.1.4.1.1966.12.1.51.3 · 1 row entry · 6 columns

Open in standard view

Ethernet 2 IPv6 custom address table.

ipv6AddressEth2Entry entry .1.3.6.1.4.1.1966.12.1.51.3.1

Ethernet 2 IPv6 custom entry.

Indexes

ipv6AddressEth2Index

Column	Syntax	OID
ipv6AddressEth2Index Ethernet 2 custom IPv6 address index.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.51.3.1.1
ipv6AddressEth2Status When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.51.3.1.2
ipv6AddressEth2Addr (Ethernet 2) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address or enter a specific IPv6 address.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.51.3.1.3
ipv6AddressEth2PrefixBits (Ethernet 2) The IPv6 prefix bits of either the network or IPv6 address.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.51.3.1.4
ipv6AddressEth2Auto (Ethernet 2) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.3.1.5
ipv6AddressEth2SendAdvertise (Ethernet 2) When on, the Device Server will include the IPv6 address in router advertisements.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.3.1.6

ipv6AddressEth3Table

table

.1.3.6.1.4.1.1966.12.1.51.4 · 1 row entry · 6 columns

Open in standard view

Ethernet 3 IPv6 custom address table.

ipv6AddressEth3Entry entry .1.3.6.1.4.1.1966.12.1.51.4.1

Ethernet 3 IPv6 custom entry.

Indexes

ipv6AddressEth3Index

Column	Syntax	OID
ipv6AddressEth3Index Ethernet 3 custom IPv6 address index.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.51.4.1.1
ipv6AddressEth3Status When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.51.4.1.2
ipv6AddressEth2Addr (Ethernet 2) Either enter a network prefix that the Device Server will use to derive an IPv6 address using the Device Server's MAC address or enter a specific IPv6 address.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.51.4.1.3
ipv6AddressEth3PrefixBits (Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.51.4.1.4
ipv6AddressEth3Auto (Ethernet 3) When on, the Device Server will derive an IPv6 address from the entered network prefix and the Device Server's MAC address.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.4.1.5
ipv6AddressEth3SendAdvertise (Ethernet 3) When on, the Device Server will include the IPv6 address in router advertisements.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.51.4.1.6

vpnexceptionTable

table

.1.3.6.1.4.1.1966.12.1.53.1 · 1 row entry · 4 columns

Open in standard view

vpnexceptionTable

vpnexceptionEntry entry .1.3.6.1.4.1.1966.12.1.53.1.1

vpnexceptionEntry

Indexes

vpnexceptionIndex

Column	Syntax	OID
vpnexceptionIndex vpnexceptionIndex	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.53.1.1.1
vpnexceptionStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.53.1.1.2
vpnexceptionIpAddress The IPv4 or IPv6 address of the host or network that will communicate with the Device Server outside of the VPN tunnel.	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.53.1.1.3
vpnexceptionPrefixBits The IPv4 subnet bits or IPv6 prefix bits for the network. 0-128.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.53.1.1.4

httpTunTunnelCfgTable

table

.1.3.6.1.4.1.1966.12.1.54.1.1.1 · 1 row entry · 11 columns

Open in standard view

The httpTunTunnelCfg table.

httpTunTunnelCfgEntry entry .1.3.6.1.4.1.1966.12.1.54.1.1.1.1

An entry in the httpTunTunnelCfgEntry, each relating to a tunnel.

Indexes

httpTunTunnelCfgIndex

Column	Syntax	OID
httpTunTunnelCfgIndex The table entry number for this tunnel.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.1
httpTunTunnelCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.2
httpTunTunnelCfgValid Specifies whether this tunnel is valid or not.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.3
httpTunTunnelCfgName The name of this tunnel. Tunnel names should be unique.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.4
httpTunTunnelCfgMode Specifies whether this tunnel endpoint should listen or connect. A functional HTTP tunnel consists of two endpoints: a listener and a connecter.	Enumerationr/w Enumerated Values: 1 listen 2 connect	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.5
httpTunTunnelCfgConnectHost For tunnels in connect mode, specifies the remote host to connect to.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.6
httpTunTunnelCfgConnectUseProxy For tunnels in connect mode, specifies whether to use an HTTP proxy.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.7
httpTunTunnelCfgListenRestrictIp For tunnels in listen mode, specifies whether to restrict the other tunnel endpoint to a fixed IP address. Use 0.0.0.0 for no restriction	Ipv4v6Addressr/w Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.8
httpTunTunnelCfgHttps Specifies whether this tunnel should use HTTPS for communication.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.9
httpTunTunnelCfgRestrictAccess Specifies whether this tunnel should restrict access to local connections.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.10
httpTunTunnelCfgSecret Specifies the shared secret for this tunnel. If the shared secret blank, the tunnel will be unauthenticated.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.1966.12.1.54.1.1.1.1.11

httpTunConnectionCfgTable

table

.1.3.6.1.4.1.1966.12.1.54.1.2.1 · 1 row entry · 10 columns

Open in standard view

The httpTunConnectionCfg table.

httpTunConnectionCfgEntry entry .1.3.6.1.4.1.1966.12.1.54.1.2.1.1

An entry in the httpTunConnectionCfgEntry, each relating to a Connection.

Indexes

httpTunConnectionCfgIndex

Column	Syntax	OID
httpTunConnectionCfgIndex The table entry number for this Connection.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.1
httpTunConnectionCfgStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.2
httpTunConnectionCfgValid Specifies whether this Connection is valid or not.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.3
httpTunConnectionCfgTunnelName The name of the tunnel associated with this connection.	OctetStringr/w Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.4
httpTunConnectionCfgProtocol The protocol used by this connection.	Enumerationr/w Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.5
httpTunConnectionCfgDestinationHost The destination host for this connection. Application traffic tunneled in this connection will be forwarded to this host.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.6
httpTunConnectionCfgDestinationPort The destination port for this connection. Application traffic tunneled in this connection will be forwarded to this TCP/UDP port.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.7
httpTunConnectionCfgLocalPort The local listening port for this connection. Application that wish to use this tunnel/connection should connect to this TCP/UDP port on the device server.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.8
httpTunConnectionCfgLocalIpAlias (Optional) Specifies the local IP alias for this connection. If specified, application who wish to use this tunnel/connection can connect to the local IP alias and TCP/UDP port. This is useful when you want to create …	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetString Type Constraints: range: 4	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.9
httpTunConnectionCfgRestrictAccess Specifies whether to restrict access to local application traffic only.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.54.1.2.1.1.10

httpTunTunnelStatsTable

table

.1.3.6.1.4.1.1966.12.1.54.2.1.1 · 1 row entry · 7 columns

Open in standard view

The httpTunTunnelStats table.

httpTunTunnelStatsEntry entry .1.3.6.1.4.1.1966.12.1.54.2.1.1.1

An entry in the httpTunTunnelStatsEntry, each relating to a tunnel.

Indexes

httpTunTunnelStatsIndex

Column	Syntax	OID
httpTunTunnelStatsIndex The table entry number for this tunnel.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.1
httpTunTunnelStatsName The name of this tunnel.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.2
httpTunTunnelStatsMode Specifies whether this tunnel endpoint is listening or connecting.	Enumeration Enumerated Values: 1 listen 2 connect	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.3
httpTunTunnelStatsConnectHost For tunnels in connect mode, specifies the remote host to connect to.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.4
httpTunTunnelStatsConnected Specifies whether this tunnel is connected.	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.5
httpTunTunnelStatsHttps Specifies whether this tunnel is using HTTPS for communication.	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.6
httpTunTunnelStatsAuthFailed Specifies whether authentication failed for this tunnel.	YesNoValue Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.54.2.1.1.1.7

httpTunConnectionStatsTable

table

.1.3.6.1.4.1.1966.12.1.54.2.2.1 · 1 row entry · 8 columns

Open in standard view

The httpTunConnectionStats table.

httpTunConnectionStatsEntry entry .1.3.6.1.4.1.1966.12.1.54.2.2.1.1

An entry in the httpTunConnectionStatsEntry, each relating to a Connection.

Indexes

httpTunConnectionStatsIndex

Column	Syntax	OID
httpTunConnectionStatsIndex The table entry number for this connection.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.1
httpTunConnectionStatsTunnelName The name of the tunnel associated with this connection.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.2
httpTunConnectionStatsType The type of connection: direct - Originating from this end of tunnel reverse - Originating from other end of tunnel	Enumeration Enumerated Values: 2 direct 3 reverse	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.3
httpTunConnectionStatsProtocol The protocol used by this connection.	Enumeration Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.4
httpTunConnectionStatsDestinationIp The destination IP for this connection.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.5
httpTunConnectionStatsDestinationPort The destination port for this connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.6
httpTunConnectionStatsSourceIp The source (originating) IP for this connection.	Ipv4v6Address Textual Convention: Ipv4v6Address OctetString Type Constraints: range: 0..255	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.7
httpTunConnectionStatsLocalPort The local listening port for this connection.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.1966.12.1.54.2.2.1.1.8

wlanProfileTable

table

.1.3.6.1.4.1.1966.12.1.56.1.2.1 · 1 row entry · 29 columns

Open in standard view

The WLAN profile table.

wlanProfileEntry entry .1.3.6.1.4.1.1966.12.1.56.1.2.1.1

An entry in the wlanProfileEntry, each relating to a WLAN profile.

Indexes

wlanProfileIndex

Column	Syntax	OID
wlanProfileIndex The table entry number for this user.	GenericTableIndex Textual Convention: GenericTableIndex Integer32 Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.1
wlanProfileStatus When you perform a GET on this variable, one of the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc…	ContainerStatusr/w Textual Convention: ContainerStatus Enumeration Type Values: 1 active 2 modified 4 applyChanges 6 discardChanges	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.2
wlanProfileEnable Only enabled profiles are considered for association with access points.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.3
wlanProfileConnectPriority The connect priority which the IOLAN uses when attempting to connect to an access point.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.4
wlanProfileName The name for this profile. To delete the profile, set this field to blank. If blank, this entry is currently unused.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.5
wlanProfileSsid The SSID for this profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.6
wlanProfileScanBand This profile is considered only if the access point is using the selected band. bandBoth: either 2.4GHz or 5GHz bands band2g4: 2.4GHz band band5g: 5GHz band	Enumerationr/w Enumerated Values: 1 bandBoth 2 band2g4 3 band5g	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.7
wlanProfileScanDfs Enable/disable scanning of DFS channels.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.8
wlanProfileHiddenSsid Specify whether the access point hides (Yes) or broadcasts (No) the SSID.	YesNoValuer/w Textual Convention: YesNoValue Enumeration Type Values: 1 no 2 yes	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.9
wlanProfileSecurityType The security type to use.	Enumerationr/w Enumerated Values: 1 open 2 shared 3 wpa2Personal 4 wpaPersonal 5 wpa2Enterprise 6 wpaEnterprise 7 ieee8021x	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.10
wlanProfileEncryptionType The encryption type to use.	Enumerationr/w Enumerated Values: 1 none 2 wep 3 tkip 4 aes	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.11
wlanProfileOpenSharedWepKey1 WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters.	OctetStringr/w Constraints: range: 5-26	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.12
wlanProfileOpenSharedWepKey2 WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters.	OctetStringr/w Constraints: range: 5-26	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.13
wlanProfileOpenSharedWepKey3 WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters.	OctetStringr/w Constraints: range: 5-26	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.14
wlanProfileOpenSharedWepKey4 WEP key 1. 5 case sensitive characters (wep-40) or 13 case sensitive characters (wep-104) or 10 hexadecimal case insensitive characters or 26 hexadecimal case insensitive characters.	OctetStringr/w Constraints: range: 5-26	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.15
wlanProfileOpenSharedWepTxKeyIndex The index of the WEP key to use for encrypting transmitted data.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.16
wlanProfilePersonalSecurityKey Passphrase/key to use for encrypting the data. 8-63 case sensitive characters or 64 hexadecimal characters.	OctetStringr/w Constraints: range: 8-64	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.17
wlanProfileEnterpriseUsername The username to use for authentication.	OctetStringr/w Constraints: range: 0-254	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.18
wlanProfileEnterprisePassword The password to use for authentication.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.19
wlanProfileEnterpriseValidateCert Enable/disable validation of the server certificate.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.20
wlanProfileEnterpriseAuthMethod Authentication method.	Enumerationr/w Enumerated Values: 1 eapttls 2 peap 3 leap 4 eaptls	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.21
wlanProfileEnterpriseAuthProtocol Authentication protocol.	Enumerationr/w Enumerated Values: 1 pap 2 chap 3 mschap 4 mschapv2 5 eapmschapv2 6 eapmd5 7 eapgtc	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.22
wlanProfileEnterpriseRoamingIdentity Roaming identity.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.23
wlanProfile8021xUsername The username to use for authentication.	OctetStringr/w Constraints: range: 0-254	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.24
wlanProfile8021xPassword The password to use for authentication.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.25
wlanProfile8021xValidateCert Enable/disable validation of the server certificate.	OnOffValuer/w Textual Convention: OnOffValue Enumeration Type Values: 1 off 2 on	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.26
wlanProfile8021xAuthMethod Authentication method.	Enumerationr/w Enumerated Values: 1 eapttls 2 peap 3 leap 4 eaptls	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.27
wlanProfile8021xAuthProtocol Authentication protocol.	Enumerationr/w Enumerated Values: 1 pap 2 chap 3 mschap 4 mschapv2 5 eapmschapv2 6 eapmd5 7 eapgtc	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.28
wlanProfile8021xRoamingIdentity Roaming identity.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.1966.12.1.56.1.2.1.1.29